From: Allan Klinbail <aklinbail@gmail.com>
To: Takashi Sakamoto <o-takashi@sakamocchi.jp>, alsa-devel@alsa-project.org
Subject: Re: A&H Zed R16 not completely working (DICE Jr)
Date: Wed, 20 Apr 2016 16:03:43 +0000 [thread overview]
Message-ID: <CA+aoAJcCYpaXhX4+w9ViHN9J0Uz+QgUWwCb_-U4WzkoOVZR3+g@mail.gmail.com> (raw)
In-Reply-To: <57179E91.1070202@sakamocchi.jp>
Thanks for your reply.
This isn't really suitable yet to replace FFADO
.
It provides this as separate devices so I cannot access all channels at the
same time in jack as in FFADO.
Although I don't typically use the ADAT ports other might, however I am
always using a combination of channels 1-16 and channels 17 & 18 combined,
sometimes all of them.
The device is a hardware mixing desk and all ports are designed to be used
simultaneously..
Latency performance is also much worse. FFADO will allow a buffer size of
64, ALSA will not start below 256.
I prefer to work at 128 or lower.
Here is the output you requested.
root@kxdaw:/home/allan/Downloads# cat /proc/asound/card1/dice
sections:
global: offset 10, size 95
tx: offset 105, size 142
rx: offset 247, size 282
ext_sync: offset 529, size 4
unused2: offset 0, size 0
global:
owner: ffc1:000100000000
notification: 00000040
nick name: ZED R16
clock select: internal 44100
enable: 1
status: locked 44100
ext status: 000000c0
sample rate: 44100
version: 1.0.11.0
clock caps: 44100 48000 88200 96000 adat internal
clock source names: AES12\AES34\AES56\AES78\AES_ANY\ADAT\ADAT_AUX\Word
Clock\Unused\Unused\Unused\Unused\Internal\\
tx 0:
iso channel: 0
audio channels: 16
midi ports: 1
speed: S400
names:
CH1/CH1/2\CH2/CH1/2\CH3/CH3/4\CH4/CH3/4\CH5/CH5/6\CH6/CH5/6\CH7/CH7/8\CH8/CH7/8\CH9/CH9/10\CH10/CH9/10\CH11/CH11/12\CH12/CH11/12\CH13/CH13/14\CH14/CH13/14\CH15/CH15/16\CH16/CH15/16\\
ac3 caps: 00000000
ac3 enable: 00000000
tx 1:
iso channel: 1
audio channels: 10
midi ports: 0
speed: S400
names: L/MAIN L/R\R/MAIN
L/R\ADAT1/ADAT1/2\ADAT2/ADAT1/2\ADAT3/ADAT3/4\ADAT4/ADAT3/4\ADAT5/ADAT5/6\ADAT6/ADAT5/6\ADAT7/ADAT7/8\ADAT8/ADAT7/8\\
ac3 caps: 00000000
ac3 enable: 00000000
rx 0:
iso channel: 2
sequence start: 0
audio channels: 16
midi ports: 0
names:
CH1/CH1/2\CH2/CH1/2\CH3/CH3/4\CH4/CH3/4\CH5/CH5/6\CH6/CH5/6\CH7/CH7/8\CH8/CH7/8\CH9/CH9/10\CH10/CH9/10\CH11/CH11/12\CH12/CH11/12\CH13/CH13/14\CH14/CH13/14\CH15/CH15/16\CH16/CH15/16\\
ac3 caps: 00000000
ac3 enable: 00000000
rx 1:
iso channel: 3
sequence start: 0
audio channels: 10
midi ports: 0
names: L/MAIN L/R\R/MAIN
L/R\ADAT1/ADAT1/2\ADAT2/ADAT1/2\ADAT3/ADAT3/4\ADAT4/ADAT3/4\ADAT5/ADAT5/6\ADAT6/ADAT5/6\ADAT7/ADAT7/8\ADAT8/ADAT7/8\\
ac3 caps: 00000000
ac3 enable: 00000000
ext status:
clock source: internal
locked: 1
rate: 44100
adat user data: -
On Thu, Apr 21, 2016 at 1:21 AM Takashi Sakamoto <o-takashi@sakamocchi.jp>
wrote:
> Hi,
>
> On Apr 20 2016 23:31, Allan Klinbail wrote:
> > Using kernel 4.4.0 from Ubuntu
> >
> > The ALSA driver limited the device to only 16 inputs and outputs, however
> > it has a total capability of 26
> > This is comprises of 16 inputs and outputs on the desk channels, a stereo
> > main pair of outputs and inputs for the master bus
> > 8 additional ins and outs to support the ADAT ports on the back
> (availoable
> > in 44.1 and 48 khz modes, but not 88.2 or 96 Khz
>
> This is fixed in Linux kernel 4.6.
> http://mailman.alsa-project.org/pipermail/alsa-devel/2016-March/105462.html
>
> The backported codes are available in my private repository. After
> installing, You can see two PCM character devices to handle these PCM
> channels.
> https://github.com/takaswie/snd-firewire-improve
>
> To clarify the capabilities of your model, please show me output of proc
> node, like
>
> $ cat /proc/asound/card1/dice
> sections:
> global: offset 10, size 95
> tx: offset 105, size 142
> ...
>
>
> Regards
>
> Takashi Sakamoto
>
next prev parent reply other threads:[~2016-04-20 16:03 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-20 14:31 A&H Zed R16 not completely working (DICE Jr) Allan Klinbail
2016-04-20 15:21 ` Takashi Sakamoto
2016-04-20 16:03 ` Allan Klinbail [this message]
2016-04-20 16:09 ` Allan Klinbail
2016-04-21 0:01 ` Takashi Sakamoto
2016-04-21 0:14 ` Allan Klinbail
2016-04-21 2:11 ` Takashi Sakamoto
2016-04-21 2:52 ` Allan Klinbail
2016-04-21 4:59 ` Takashi Sakamoto
2016-04-21 5:38 ` Allan Klinbail
2016-04-21 9:49 ` Takashi Sakamoto
2016-04-21 21:16 ` Allan Klinbail
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CA+aoAJcCYpaXhX4+w9ViHN9J0Uz+QgUWwCb_-U4WzkoOVZR3+g@mail.gmail.com \
--to=aklinbail@gmail.com \
--cc=alsa-devel@alsa-project.org \
--cc=o-takashi@sakamocchi.jp \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.