Replaying the end of bisect got me a bit elsewhere: git bisect start # good: [9f750794985d7386f088da941c76b73880b2b6c4] sev/i386: add sev_get_capabilities() git bisect good 9f750794985d7386f088da941c76b73880b2b6c4 # bad: [91c60f124e682a78c9a2ef951e8e58ebab6441d0] target/ppc: fix tlbsync to check privilege level depending on GTSE git bisect bad 91c60f124e682a78c9a2ef951e8e58ebab6441d0 # bad: [a57946ff2acb9c0d95c9f127914540586b0b8c21] Merge remote-tracking branch 'remotes/awilliam/tags/vfio-update-20180313.0' into staging git bisect bad a57946ff2acb9c0d95c9f127914540586b0b8c21 # good: [5bdd374347b873ab59b356a284494a8bc1664008] Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream-sev' into staging git bisect good 5bdd374347b873ab59b356a284494a8bc1664008 # bad: [55901900ec69d6fd6f332003d8ab81b2f8a38529] Merge remote-tracking branch 'remotes/vivier2/tags/linux-user-for-2.12-pull-request' into staging git bisect bad 55901900ec69d6fd6f332003d8ab81b2f8a38529 # bad: [d4090306c8079ca3df426f82c493314c3537064e] qemu-binfmt-conf.sh: add qemu-xtensa git bisect bad d4090306c8079ca3df426f82c493314c3537064e # good: [d4247ec2d79ef2477cb886fa688706b068119736] linux-user: Support f_flags in statfs when available. git bisect good d4247ec2d79ef2477cb886fa688706b068119736 # bad: [3c5f6a5f888729f9fbc64211298f7c3e2fb42b64] linux-user: fix assertion in shmdt git bisect bad 3c5f6a5f888729f9fbc64211298f7c3e2fb42b64 # bad: [ebf9a3630c911d0cfc9c20f7cafe9ba4f88cf583] linux-user: fix mmap/munmap/mprotect/mremap/shmat git bisect bad ebf9a3630c911d0cfc9c20f7cafe9ba4f88cf583 # first bad commit: [ebf9a3630c911d0cfc9c20f7cafe9ba4f88cf583] linux-user: fix mmap/munmap/mprotect/mremap/shmat And this time reverting ebf9a3630c911d0cfc9c20f7cafe9ba4f88cf583 worked for me. Sending v2 in few minutes for Ross to re-test it on AB. On Fri, Jun 1, 2018 at 8:37 AM Martin Jansa wrote: > Yesterday I've tried to replay the end of the bisect and surprisingly I > wasn't seeing the hang with d4247ec2d79ef2477cb886fa688706b068119736. > > With 2nd bad d4090306c8079ca3df426f82c493314c3537064e it hangs again. > > So either I didn't wait long enough for qemu-i386 to finish (I mark it as > bad after it spends > 10mins inside qemu-i386 or the hang doesn't happen > reliably even with "bad" revision of qemu. > > The revisions I'm trying are here: > > http://git.openembedded.org/openembedded-core-contrib/log/?h=jansa/qemu-hang > > On Fri, Jun 1, 2018 at 2:01 AM Alistair Francis > wrote: > >> On Thu, May 31, 2018 at 8:41 AM, Martin Jansa >> wrote: >> > I've finished the bisect today: >> > >> > qemu$ git bisect log >> > git bisect start >> > # good: [9f750794985d7386f088da941c76b73880b2b6c4] sev/i386: add >> > sev_get_capabilities() >> > git bisect good 9f750794985d7386f088da941c76b73880b2b6c4 >> > # bad: [91c60f124e682a78c9a2ef951e8e58ebab6441d0] target/ppc: fix >> tlbsync to >> > check privilege level depending on GTSE >> > git bisect bad 91c60f124e682a78c9a2ef951e8e58ebab6441d0 >> > # bad: [a57946ff2acb9c0d95c9f127914540586b0b8c21] Merge remote-tracking >> > branch 'remotes/awilliam/tags/vfio-update-20180313.0' into staging >> > git bisect bad a57946ff2acb9c0d95c9f127914540586b0b8c21 >> > # good: [5bdd374347b873ab59b356a284494a8bc1664008] Merge remote-tracking >> > branch 'remotes/bonzini/tags/for-upstream-sev' into staging >> > git bisect good 5bdd374347b873ab59b356a284494a8bc1664008 >> > # bad: [55901900ec69d6fd6f332003d8ab81b2f8a38529] Merge remote-tracking >> > branch 'remotes/vivier2/tags/linux-user-for-2.12-pull-request' into >> staging >> > git bisect bad 55901900ec69d6fd6f332003d8ab81b2f8a38529 >> > # bad: [d4090306c8079ca3df426f82c493314c3537064e] qemu-binfmt-conf.sh: >> add >> > qemu-xtensa >> > git bisect bad d4090306c8079ca3df426f82c493314c3537064e >> > # bad: [d4247ec2d79ef2477cb886fa688706b068119736] linux-user: Support >> > f_flags in statfs when available. >> > git bisect bad d4247ec2d79ef2477cb886fa688706b068119736 >> > # good: [f8b985d65cf67004483816d5afcb7bf686e11702] linux-user: Remove >> the >> > unused "not implemented" signal handling stubs >> > git bisect good f8b985d65cf67004483816d5afcb7bf686e11702 >> > # good: [3ff48453e894990ea6495574037e70ed9b91947e] linux-user: allows >> to use >> > "--systemd ALL" with qemu-binfmt-conf.sh >> > git bisect good 3ff48453e894990ea6495574037e70ed9b91947e >> > # first bad commit: [d4247ec2d79ef2477cb886fa688706b068119736] >> linux-user: >> > Support f_flags in statfs when available. >> >> Awesome! Thanks for this. >> >> > >> > >> > Unfortunately just revering "[d4247ec2d79ef2477cb886fa688706b068119736] >> > linux-user: Support f_flags in statfs when available" at the top of >> v2.12.0 >> > still hangs. >> > >> > I will try to dig a bit more, but any advice would be appreciated. >> >> I managed to reproduce the hang today, so I'll investigate tomorrow. >> I'm surprised reverting the commit doesn't work. >> >> Alistair >> >> > >> > On Tue, May 29, 2018 at 10:40 PM Martin Jansa >> > wrote: >> >> >> >> After removing ld-is-gold I was able to reproduce the issue. >> >> >> >> Unfortunately removing the >> >> >> meta/recipes-devtools/qemu/qemu/linux-user-Fix-webkitgtk-hangs-on-32-bit-x86-target.patch >> >> doesn't help with the hang, then I've tried to upgrade to latest >> SRCREV in >> >> qemu master (currently 5a5c383b1373aeb6c87a0d6060f6c3dc7c53082b) >> >> >> >> Will try to bisect where it started to hang between 2.11.0 and 2.12.0, >> but >> >> it might be faster if Alistair Francis can chime in as the author of >> this >> >> patch, he might have better idea why it stopped working. >> >> >> >> Cheers, >> >> >> >> On Tue, May 29, 2018 at 2:56 PM Martin Jansa >> >> wrote: >> >>> >> >>> I've tried to reproduce it locally, but g-ir-scanner-qemuwrapper is >> >>> failing for me in various recipes and I never got as far as webkitgtk >> >>> >> >>> pango: >> >>> Error relocating >> >>> >> TOPDIR/tmp-musl/work/i586-oe-linux-musl/pango/1.40.14-r0/recipe-sysroot//usr/lib/libGL.so.1: >> >>> __glX_tls_Context: symbol not found >> >>> http://errors.yoctoproject.org/Errors/Details/178988/ >> >>> >> >>> after disabling GI for pango (GI_DATA_ENABLED_pn-pango = "False") it >> >>> failed in >> >>> librsvg: >> >>> Error relocating >> >>> >> TOPDIR/tmp-musl/work/i586-oe-linux-musl/librsvg/2.40.20-r0/recipe-sysroot//usr/lib/libGL.so.1: >> >>> __glX_tls_Context: symbol not found >> >>> http://errors.yoctoproject.org/Errors/Details/178991/ >> >>> >> >>> gstreamer1.0-plugins-base: >> >>> Error relocating >> >>> >> TOPDIR/tmp-musl/work/i586-oe-linux-musl/gstreamer1.0-plugins-base/1.14.0-r0/recipe-sysroot//usr/lib/libEGL.so.1: >> >>> _egl_TLS: symbol not found >> >>> http://errors.yoctoproject.org/Errors/Details/178993/ >> >>> >> >>> and gtk+3 as well, because of disabled GI for pango: >> >>> Couldn't find include 'Pango-1.0.gir' (search path: >> >>> >> '['TOPDIR/tmp-musl/work/i586-oe-linux-musl/gtk+3/3.22.29-r0/recipe-sysroot/usr/share/gir-1.0', >> >>> '../gdk', >> >>> >> 'TOPDIR/tmp-musl/work/i586-oe-linux-musl/gtk+3/3.22.29-r0/recipe-sysroot/usr/share/gir-1.0', >> >>> >> 'TOPDIR/tmp-musl/work/i586-oe-linux-musl/gtk+3/3.22.29-r0/recipe-sysroot-native/usr/share/gir-1.0', >> >>> '/usr/share/gir-1.0', >> >>> >> 'TOPDIR/tmp-musl/work/i586-oe-linux-musl/gtk+3/3.22.29-r0/recipe-sysroot-native/usr/share/gir-1.0']') >> >>> >> >>> >> TOPDIR/tmp-musl/work/i586-oe-linux-musl/gtk+3/3.22.29-r0/recipe-sysroot/usr/share/gobject-introspection-1.0/Makefile.introspection:159: >> >>> recipe for target 'Gdk-3.0.gir' failed >> >>> http://errors.yoctoproject.org/Errors/Details/178992/ >> >>> >> >>> I'm not sure how exactly AB is doing this qemux86 musl build, it >> might be >> >>> some more changes I have locally or missing/superfluous something in >> my >> >>> config. >> >>> >> >>> On Tue, May 29, 2018 at 11:10 AM Martin Jansa > > >> >>> wrote: >> >>>> >> >>>> This hang should have been fixed by: >> >>>> >> >>>> >> meta/recipes-devtools/qemu/qemu/linux-user-Fix-webkitgtk-hangs-on-32-bit-x86-target.patch >> >>>> >> >>>> which was added with previous upgrade to 2.11.0: >> >>>> >> >>>> commit d6d0d99569e0d8b62a61e27d389e7939af45bab9 >> >>>> Author: Alistair Francis >> >>>> Date: Wed Jan 17 13:39:06 2018 -0800 >> >>>> >> >>>> qemu: Bump to version 2.11.0 >> >>>> >> >>>> and my update only shifted the chunk by 2 lines in: >> >>>> >> >>>> commit a742584f253e25b97729abe19ca9e4fa2809ea2e >> >>>> Author: Martin Jansa >> >>>> Date: Wed May 2 14:37:33 2018 +0000 >> >>>> >> >>>> qemu: refresh patches with devtool >> >>>> >> >>>> and the patch is still being applied. I was waiting for >> >>>> http://jenkins.nas-admin.org/view/OE/job/oe_world_qemux86/ to >> reproduce it, >> >>>> but it seems that Khem is working on some bigger overhaul of the >> jobs and >> >>>> it's not ready yet, I'll try to reproduce it locally now and if I can >> >>>> reproduce it, then I'll try to just remove this patch, because the >> upstream >> >>>> didn't accept it very well in: >> >>>> http://lists.gnu.org/archive/html/qemu-devel/2018-01/msg04185.html >> >>>> and the discussion there died few months ago. >> >>>> >> >>>> Regards, >> >>>> >> >>>> On Fri, May 18, 2018 at 11:59 PM Burton, Ross > > >> >>>> wrote: >> >>>>> >> >>>>> This is causing the AB to hang when built for qemux86 with musl >> whilst >> >>>>> building webkitgtk during the gobject-introspection qemu-i386 calls, >> >>>>> qemu enters an infinite loop. >> >>>>> >> >>>>> I've not yet reproduced locally to try and get a log out of qemu, >> but >> >>>>> it has happened on the autobuilder repeatedly. >> >>>>> >> >>>>> Ross >> >>>>> >> >>>>> On 2 May 2018 at 15:37, Martin Jansa >> wrote: >> >>>>> > Signed-off-by: Martin Jansa >> >>>>> > --- >> >>>>> > meta/conf/distro/include/tcmode-default.inc | 2 +- >> >>>>> > ...4-treat-DISAS_UPDATE-as-variant-of-D.patch | 67 >> >>>>> > ------------------- >> >>>>> > ...-connect-socket-to-a-spawned-command.patch | 52 +++++++------- >> >>>>> > .../qemu/qemu/disable-grabs.patch | 43 ++++++------ >> >>>>> > meta/recipes-devtools/qemu/qemu/memfd.patch | 57 >> ---------------- >> >>>>> > .../qemu/qemu/qemu-2.5.0-cflags.patch | 15 ++++- >> >>>>> > .../qemu/{qemu_2.11.1.bb => qemu_2.12.0.bb} | 6 +- >> >>>>> > 7 files changed, 65 insertions(+), 177 deletions(-) >> >>>>> > delete mode 100644 >> >>>>> > >> meta/recipes-devtools/qemu/qemu/0001-arm-translate-a64-treat-DISAS_UPDATE-as-variant-of-D.patch >> >>>>> > delete mode 100644 meta/recipes-devtools/qemu/qemu/memfd.patch >> >>>>> > rename meta/recipes-devtools/qemu/{qemu_2.11.1.bb => >> qemu_2.12.0.bb} >> >>>>> > (87%) >> >>>>> > >> >>>>> > diff --git a/meta/conf/distro/include/tcmode-default.inc >> >>>>> > b/meta/conf/distro/include/tcmode-default.inc >> >>>>> > index 00399ae820..8b5214ed96 100644 >> >>>>> > --- a/meta/conf/distro/include/tcmode-default.inc >> >>>>> > +++ b/meta/conf/distro/include/tcmode-default.inc >> >>>>> > @@ -28,7 +28,7 @@ BINUVERSION ?= "2.30%" >> >>>>> > GDBVERSION ?= "8.0%" >> >>>>> > GLIBCVERSION ?= "2.27%" >> >>>>> > LINUXLIBCVERSION ?= "4.15%" >> >>>>> > -QEMUVERSION ?= "2.11%" >> >>>>> > +QEMUVERSION ?= "2.12%" >> >>>>> > >> >>>>> > PREFERRED_VERSION_gcc ?= "${GCCVERSION}" >> >>>>> > PREFERRED_VERSION_gcc-cross-${TARGET_ARCH} ?= "${GCCVERSION}" >> >>>>> > diff --git >> >>>>> > >> a/meta/recipes-devtools/qemu/qemu/0001-arm-translate-a64-treat-DISAS_UPDATE-as-variant-of-D.patch >> >>>>> > >> b/meta/recipes-devtools/qemu/qemu/0001-arm-translate-a64-treat-DISAS_UPDATE-as-variant-of-D.patch >> >>>>> > deleted file mode 100644 >> >>>>> > index f90cae694c..0000000000 >> >>>>> > --- >> >>>>> > >> a/meta/recipes-devtools/qemu/qemu/0001-arm-translate-a64-treat-DISAS_UPDATE-as-variant-of-D.patch >> >>>>> > +++ /dev/null >> >>>>> > @@ -1,67 +0,0 @@ >> >>>>> > -From a75a52d62418dafe462be4fe30485501d1010bb9 Mon Sep 17 00:00:00 >> >>>>> > 2001 >> >>>>> > -From: Victor Kamensky >> >>>>> > -Date: Fri, 23 Mar 2018 18:26:45 +0000 >> >>>>> > -Subject: [PATCH] arm/translate-a64: treat DISAS_UPDATE as >> variant of >> >>>>> > - DISAS_EXIT >> >>>>> > -MIME-Version: 1.0 >> >>>>> > -Content-Type: text/plain; charset=UTF-8 >> >>>>> > -Content-Transfer-Encoding: 8bit >> >>>>> > - >> >>>>> > -In OE project 4.15 linux kernel boot hang was observed under >> >>>>> > -single cpu aarch64 qemu. Kernel code was in a loop waiting for >> >>>>> > -vtimer arrival, spinning in TC generated blocks, while interrupt >> >>>>> > -was pending unprocessed. This happened because when qemu tried to >> >>>>> > -handle vtimer interrupt target had interrupts disabled, as >> >>>>> > -result flag indicating TCG exit, cpu->icount_decr.u16.high, >> >>>>> > -was cleared but arm_cpu_exec_interrupt function did not call >> >>>>> > -arm_cpu_do_interrupt to process interrupt. Later when target >> >>>>> > -reenabled interrupts, it happened without exit into main loop, so >> >>>>> > -following code that waited for result of interrupt execution >> >>>>> > -run in infinite loop. >> >>>>> > - >> >>>>> > -To solve the problem instructions that operate on CPU sys state >> >>>>> > -(i.e enable/disable interrupt), and marked as DISAS_UPDATE, >> >>>>> > -should be considered as DISAS_EXIT variant, and should be >> >>>>> > -forced to exit back to main loop so qemu will have a chance >> >>>>> > -processing pending CPU state updates, including pending >> >>>>> > -interrupts. >> >>>>> > - >> >>>>> > -This change brings consistency with how DISAS_UPDATE is treated >> >>>>> > -in aarch32 case. >> >>>>> > - >> >>>>> > -CC: Peter Maydell >> >>>>> > -CC: Alex Bennée >> >>>>> > -CC: qemu-stable@nongnu.org >> >>>>> > -Suggested-by: Peter Maydell >> >>>>> > -Signed-off-by: Victor Kamensky >> >>>>> > -Reviewed-by: Richard Henderson >> >>>>> > -Message-id: 1521526368-1996-1-git-send-email-kamensky@cisco.com >> >>>>> > -Signed-off-by: Peter Maydell >> >>>>> > -Upstream-Status: Backport >> >>>>> > ---- >> >>>>> > - target/arm/translate-a64.c | 6 +++--- >> >>>>> > - 1 file changed, 3 insertions(+), 3 deletions(-) >> >>>>> > - >> >>>>> > -diff --git a/target/arm/translate-a64.c >> b/target/arm/translate-a64.c >> >>>>> > -index 31ff047..327513e 100644 >> >>>>> > ---- a/target/arm/translate-a64.c >> >>>>> > -+++ b/target/arm/translate-a64.c >> >>>>> > -@@ -13378,12 +13378,12 @@ static void >> >>>>> > aarch64_tr_tb_stop(DisasContextBase *dcbase, CPUState *cpu) >> >>>>> > - case DISAS_UPDATE: >> >>>>> > - gen_a64_set_pc_im(dc->pc); >> >>>>> > - /* fall through */ >> >>>>> > -- case DISAS_JUMP: >> >>>>> > -- tcg_gen_lookup_and_goto_ptr(); >> >>>>> > -- break; >> >>>>> > - case DISAS_EXIT: >> >>>>> > - tcg_gen_exit_tb(0); >> >>>>> > - break; >> >>>>> > -+ case DISAS_JUMP: >> >>>>> > -+ tcg_gen_lookup_and_goto_ptr(); >> >>>>> > -+ break; >> >>>>> > - case DISAS_NORETURN: >> >>>>> > - case DISAS_SWI: >> >>>>> > - break; >> >>>>> > --- >> >>>>> > -2.7.4 >> >>>>> > - >> >>>>> > diff --git >> >>>>> > >> a/meta/recipes-devtools/qemu/qemu/chardev-connect-socket-to-a-spawned-command.patch >> >>>>> > >> b/meta/recipes-devtools/qemu/qemu/chardev-connect-socket-to-a-spawned-command.patch >> >>>>> > index 6e6bf95c18..f1cf53a8c5 100644 >> >>>>> > --- >> >>>>> > >> a/meta/recipes-devtools/qemu/qemu/chardev-connect-socket-to-a-spawned-command.patch >> >>>>> > +++ >> >>>>> > >> b/meta/recipes-devtools/qemu/qemu/chardev-connect-socket-to-a-spawned-command.patch >> >>>>> > @@ -1,4 +1,4 @@ >> >>>>> > -From 3bb3100c22eb30146a69656480bdffeef8663575 Mon Sep 17 00:00:00 >> >>>>> > 2001 >> >>>>> > +From a7690b02df70e0d3957e6eaa1e1cf92595839fbb Mon Sep 17 00:00:00 >> >>>>> > 2001 >> >>>>> > From: Alistair Francis >> >>>>> > Date: Thu, 21 Dec 2017 11:35:16 -0800 >> >>>>> > Subject: [PATCH] chardev: connect socket to a spawned command >> >>>>> > @@ -45,16 +45,16 @@ Upstream-Status: Inappropriate [embedded >> >>>>> > specific] >> >>>>> > >> >>>>> > Signed-off-by: Patrick Ohly >> >>>>> > --- >> >>>>> > - chardev/char-socket.c | 86 >> >>>>> > ++++++++++++++++++++++++++++++++++++++++++++++++--- >> >>>>> > - chardev/char.c | 3 ++ >> >>>>> > - qapi/char.json | 5 +++ >> >>>>> > - 3 files changed, 90 insertions(+), 4 deletions(-) >> >>>>> > + chardev/char-socket.c | 102 >> >>>>> > ++++++++++++++++++++++++++++++++++++++++++ >> >>>>> > + chardev/char.c | 3 ++ >> >>>>> > + qapi/char.json | 5 +++ >> >>>>> > + 3 files changed, 110 insertions(+) >> >>>>> > >> >>>>> > diff --git a/chardev/char-socket.c b/chardev/char-socket.c >> >>>>> > -index 53eda8ef00..f566107c35 100644 >> >>>>> > +index 159e69c3b1..84778cf31a 100644 >> >>>>> > --- a/chardev/char-socket.c >> >>>>> > +++ b/chardev/char-socket.c >> >>>>> > -@@ -852,6 +852,68 @@ static gboolean >> >>>>> > socket_reconnect_timeout(gpointer opaque) >> >>>>> > +@@ -934,6 +934,68 @@ static gboolean >> >>>>> > socket_reconnect_timeout(gpointer opaque) >> >>>>> > return false; >> >>>>> > } >> >>>>> > >> >>>>> > @@ -123,7 +123,7 @@ index 53eda8ef00..f566107c35 100644 >> >>>>> > static void qmp_chardev_open_socket(Chardev *chr, >> >>>>> > ChardevBackend *backend, >> >>>>> > bool *be_opened, >> >>>>> > -@@ -859,6 +921,9 @@ >> >>>>> > +@@ -941,6 +1003,9 @@ static void qmp_chardev_open_socket(Chardev >> >>>>> > *chr, >> >>>>> > { >> >>>>> > SocketChardev *s = SOCKET_CHARDEV(chr); >> >>>>> > ChardevSocket *sock = backend->u.socket.data; >> >>>>> > @@ -133,11 +133,10 @@ index 53eda8ef00..f566107c35 100644 >> >>>>> > bool do_nodelay = sock->has_nodelay ? sock->nodelay : >> >>>>> > false; >> >>>>> > bool is_listen = sock->has_server ? sock->server : >> true; >> >>>>> > bool is_telnet = sock->has_telnet ? sock->telnet : >> >>>>> > false; >> >>>>> > -@@ -925,7 +990,14 @@ >> >>>>> > - } else if (reconnect > 0) { >> >>>>> > +@@ -1008,6 +1073,14 @@ static void >> qmp_chardev_open_socket(Chardev >> >>>>> > *chr, >> >>>>> > s->reconnect_time = reconnect; >> >>>>> > } >> >>>>> > -- >> >>>>> > + >> >>>>> > +#ifndef _WIN32 >> >>>>> > + if (cmd) { >> >>>>> > + chardev_open_socket_cmd(chr, cmd, errp); >> >>>>> > @@ -146,12 +145,12 @@ index 53eda8ef00..f566107c35 100644 >> >>>>> > + *be_opened = true; >> >>>>> > + } else >> >>>>> > +#endif >> >>>>> > - if (s->reconnect_time) { >> >>>>> > - sioc = qio_channel_socket_new(); >> >>>>> > - tcp_chr_set_client_ioc_name(chr, sioc); >> >>>>> > -@@ -985,10 +1057,26 @@ >> >>>>> > - const char *host = qemu_opt_get(opts, "host"); >> >>>>> > + /* If reconnect_time is set, will do that in >> chr_machine_done. >> >>>>> > */ >> >>>>> > + if (!s->reconnect_time) { >> >>>>> > + if (s->is_listen) { >> >>>>> > +@@ -1065,9 +1138,26 @@ static void qemu_chr_parse_socket(QemuOpts >> >>>>> > *opts, ChardevBackend *backend, >> >>>>> > const char *port = qemu_opt_get(opts, "port"); >> >>>>> > + const char *fd = qemu_opt_get(opts, "fd"); >> >>>>> > const char *tls_creds = qemu_opt_get(opts, "tls-creds"); >> >>>>> > +#ifndef _WIN32 >> >>>>> > + const char *cmd = qemu_opt_get(opts, "cmd"); >> >>>>> > @@ -159,7 +158,6 @@ index 53eda8ef00..f566107c35 100644 >> >>>>> > SocketAddressLegacy *addr; >> >>>>> > ChardevSocket *sock; >> >>>>> > >> >>>>> > - backend->type = CHARDEV_BACKEND_KIND_SOCKET; >> >>>>> > +#ifndef _WIN32 >> >>>>> > + if (cmd) { >> >>>>> > + /* >> >>>>> > @@ -173,17 +171,18 @@ index 53eda8ef00..f566107c35 100644 >> >>>>> > + } >> >>>>> > + } else >> >>>>> > +#endif >> >>>>> > - if (!path) { >> >>>>> > - if (!host) { >> >>>>> > - error_setg(errp, "chardev: socket: no host given"); >> >>>>> > -@@ -1021,13 +1109,24 @@ >> >>>>> > - sock->has_reconnect = true; >> >>>>> > ++ >> >>>>> > + if ((!!path + !!fd + !!host) != 1) { >> >>>>> > + error_setg(errp, >> >>>>> > + "Exactly one of 'path', 'fd' or 'host' >> >>>>> > required"); >> >>>>> > +@@ -1112,12 +1202,24 @@ static void >> qemu_chr_parse_socket(QemuOpts >> >>>>> > *opts, ChardevBackend *backend, >> >>>>> > sock->reconnect = reconnect; >> >>>>> > sock->tls_creds = g_strdup(tls_creds); >> >>>>> > + >> >>>>> > +#ifndef _WIN32 >> >>>>> > + sock->cmd = g_strdup(cmd); >> >>>>> > +#endif >> >>>>> > - >> >>>>> > ++ >> >>>>> > addr = g_new0(SocketAddressLegacy, 1); >> >>>>> > +#ifndef _WIN32 >> >>>>> > + if (path || cmd) { >> >>>>> > @@ -198,11 +197,11 @@ index 53eda8ef00..f566107c35 100644 >> >>>>> > +#else >> >>>>> > q_unix->path = g_strdup(path); >> >>>>> > +#endif >> >>>>> > - } else { >> >>>>> > + } else if (host) { >> >>>>> > addr->type = SOCKET_ADDRESS_LEGACY_KIND_INET; >> >>>>> > addr->u.inet.data = g_new(InetSocketAddress, 1); >> >>>>> > diff --git a/chardev/char.c b/chardev/char.c >> >>>>> > -index 2ae4f465ec..5d52cd5de5 100644 >> >>>>> > +index 76d866e6fe..9747d51d7c 100644 >> >>>>> > --- a/chardev/char.c >> >>>>> > +++ b/chardev/char.c >> >>>>> > @@ -792,6 +792,9 @@ QemuOptsList qemu_chardev_opts = { >> >>>>> > @@ -239,4 +238,5 @@ index ae19dcd1ed..6de0f29bcd 100644 >> >>>>> > '*server' : 'bool', >> >>>>> > '*wait' : 'bool', >> >>>>> > -- >> >>>>> > -2.14.1 >> >>>>> > +2.17.0 >> >>>>> > + >> >>>>> > diff --git a/meta/recipes-devtools/qemu/qemu/disable-grabs.patch >> >>>>> > b/meta/recipes-devtools/qemu/qemu/disable-grabs.patch >> >>>>> > index 77117890f4..e29c011a6f 100644 >> >>>>> > --- a/meta/recipes-devtools/qemu/qemu/disable-grabs.patch >> >>>>> > +++ b/meta/recipes-devtools/qemu/qemu/disable-grabs.patch >> >>>>> > @@ -1,3 +1,11 @@ >> >>>>> > +From a31c5c695cb716310257f1fc60a06b821e74fe7f Mon Sep 17 00:00:00 >> >>>>> > 2001 >> >>>>> > +From: Ross Burton >> >>>>> > +Date: Wed, 18 Sep 2013 14:04:54 +0100 >> >>>>> > +Subject: [PATCH] sdl.c: allow user to disable pointer grabs >> >>>>> > +MIME-Version: 1.0 >> >>>>> > +Content-Type: text/plain; charset=UTF-8 >> >>>>> > +Content-Transfer-Encoding: 8bit >> >>>>> > + >> >>>>> > When the pointer enters the Qemu window it calls >> SDL_WM_GrabInput, >> >>>>> > which calls >> >>>>> > XGrabPointer in a busyloop until it returns GrabSuccess. However >> if >> >>>>> > there's already >> >>>>> > a pointer grab (screen is locked, a menu is open) then qemu will >> >>>>> > hang until the >> >>>>> > @@ -11,35 +19,30 @@ them in a conditional that can be set by the >> >>>>> > autobuilder environment, preserving >> >>>>> > the current grabbing behaviour for everyone else. >> >>>>> > >> >>>>> > Upstream-Status: Pending >> >>>>> > -Signed-off-by: Ross Burton >> >>>>> > - >> >>>>> > -From 4b1988ecb01a178269ec0513a75f2ec620c7ef6a Mon Sep 17 00:00:00 >> >>>>> > 2001 >> >>>>> > -From: Ross Burton >> >>>>> > -Date: Wed, 18 Sep 2013 14:04:54 +0100 >> >>>>> > -Subject: [PATCH] sdl.c: allow user to disable pointer grabs >> >>>>> > - >> >>>>> > Signed-off-by: Ross Burton >> >>>>> > Signed-off-by: Eric Bénard >> >>>>> > + >> >>>>> > --- >> >>>>> > - ui/sdl.c | 12 ++++++++++-- >> >>>>> > - 1 file changed, 10 insertions(+), 2 deletions(-) >> >>>>> > + ui/sdl.c | 13 +++++++++++-- >> >>>>> > + 1 file changed, 11 insertions(+), 2 deletions(-) >> >>>>> > >> >>>>> > -Index: qemu-2.11.1/ui/sdl.c >> >>>>> > >> -=================================================================== >> >>>>> > ---- qemu-2.11.1.orig/ui/sdl.c >> >>>>> > -+++ qemu-2.11.1/ui/sdl.c >> >>>>> > -@@ -63,6 +63,10 @@ static SDL_PixelFormat host_format; >> >>>>> > - static int scaling_active = 0; >> >>>>> > - static Notifier mouse_mode_notifier; >> >>>>> > - static int idle_counter; >> >>>>> > +diff --git a/ui/sdl.c b/ui/sdl.c >> >>>>> > +index a5fd503..ab8d1b1 100644 >> >>>>> > +--- a/ui/sdl.c >> >>>>> > ++++ b/ui/sdl.c >> >>>>> > +@@ -68,6 +68,11 @@ static int idle_counter; >> >>>>> > + static const guint16 *keycode_map; >> >>>>> > + static size_t keycode_maplen; >> >>>>> > + >> >>>>> > +#ifndef True >> >>>>> > +#define True 1 >> >>>>> > +#endif >> >>>>> > +static doing_grabs = True; >> >>>>> > - >> >>>>> > ++ >> >>>>> > #define SDL_REFRESH_INTERVAL_BUSY 10 >> >>>>> > #define SDL_MAX_IDLE_COUNT (2 * GUI_REFRESH_INTERVAL_DEFAULT \ >> >>>>> > -@@ -431,14 +435,16 @@ static void sdl_grab_start(void) >> >>>>> > + / SDL_REFRESH_INTERVAL_BUSY + 1) >> >>>>> > +@@ -398,14 +403,16 @@ static void sdl_grab_start(void) >> >>>>> > } >> >>>>> > } else >> >>>>> > sdl_hide_cursor(); >> >>>>> > @@ -58,7 +61,7 @@ Index: qemu-2.11.1/ui/sdl.c >> >>>>> > gui_grab = 0; >> >>>>> > sdl_show_cursor(); >> >>>>> > sdl_update_caption(); >> >>>>> > -@@ -986,6 +992,8 @@ void sdl_display_init(DisplayState *ds, >> >>>>> > +@@ -945,6 +952,8 @@ static void sdl1_display_init(DisplayState >> *ds, >> >>>>> > DisplayOptions *o) >> >>>>> > * This requires SDL >= 1.2.14. */ >> >>>>> > setenv("SDL_DISABLE_LOCK_KEYS", "1", 1); >> >>>>> > >> >>>>> > diff --git a/meta/recipes-devtools/qemu/qemu/memfd.patch >> >>>>> > b/meta/recipes-devtools/qemu/qemu/memfd.patch >> >>>>> > deleted file mode 100644 >> >>>>> > index 62e8d3800b..0000000000 >> >>>>> > --- a/meta/recipes-devtools/qemu/qemu/memfd.patch >> >>>>> > +++ /dev/null >> >>>>> > @@ -1,57 +0,0 @@ >> >>>>> > -Upstream-Status: Backport >> >>>>> > -Signed-off-by: Ross Burton >> >>>>> > - >> >>>>> > -From 75e5b70e6b5dcc4f2219992d7cffa462aa406af0 Mon Sep 17 00:00:00 >> >>>>> > 2001 >> >>>>> > -From: Paolo Bonzini >> >>>>> > -Date: Tue, 28 Nov 2017 11:51:27 +0100 >> >>>>> > -Subject: [PATCH] memfd: fix configure test >> >>>>> > -MIME-Version: 1.0 >> >>>>> > -Content-Type: text/plain; charset=UTF-8 >> >>>>> > -Content-Transfer-Encoding: 8bit >> >>>>> > - >> >>>>> > -Recent glibc added memfd_create in sys/mman.h. This conflicts >> with >> >>>>> > -the definition in util/memfd.c: >> >>>>> > - >> >>>>> > - /builddir/build/BUILD/qemu-2.11.0-rc1/util/memfd.c:40:12: >> error: >> >>>>> > static declaration of memfd_create follows non-static declaration >> >>>>> > - >> >>>>> > -Fix the configure test, and remove the sys/memfd.h inclusion >> since >> >>>>> > the >> >>>>> > -file actually does not exist---it is a typo in the >> memfd_create(2) >> >>>>> > man >> >>>>> > -page. >> >>>>> > - >> >>>>> > -Cc: Marc-André Lureau >> >>>>> > -Signed-off-by: Paolo Bonzini >> >>>>> > ---- >> >>>>> > - configure | 2 +- >> >>>>> > - util/memfd.c | 4 +--- >> >>>>> > - 2 files changed, 2 insertions(+), 4 deletions(-) >> >>>>> > - >> >>>>> > -diff --git a/configure b/configure >> >>>>> > -index 9c8aa5a98b..99ccc1725a 100755 >> >>>>> > ---- a/configure >> >>>>> > -+++ b/configure >> >>>>> > -@@ -3923,7 +3923,7 @@ fi >> >>>>> > - # check if memfd is supported >> >>>>> > - memfd=no >> >>>>> > - cat > $TMPC << EOF >> >>>>> > --#include >> >>>>> > -+#include >> >>>>> > - >> >>>>> > - int main(void) >> >>>>> > - { >> >>>>> > -diff --git a/util/memfd.c b/util/memfd.c >> >>>>> > -index 4571d1aba8..412e94a405 100644 >> >>>>> > ---- a/util/memfd.c >> >>>>> > -+++ b/util/memfd.c >> >>>>> > -@@ -31,9 +31,7 @@ >> >>>>> > - >> >>>>> > - #include "qemu/memfd.h" >> >>>>> > - >> >>>>> > --#ifdef CONFIG_MEMFD >> >>>>> > --#include >> >>>>> > --#elif defined CONFIG_LINUX >> >>>>> > -+#if defined CONFIG_LINUX && !defined CONFIG_MEMFD >> >>>>> > - #include >> >>>>> > - #include >> >>>>> > - >> >>>>> > --- >> >>>>> > -2.11.0 >> >>>>> > diff --git >> a/meta/recipes-devtools/qemu/qemu/qemu-2.5.0-cflags.patch >> >>>>> > b/meta/recipes-devtools/qemu/qemu/qemu-2.5.0-cflags.patch >> >>>>> > index eb99d14639..360519f1a1 100644 >> >>>>> > --- a/meta/recipes-devtools/qemu/qemu/qemu-2.5.0-cflags.patch >> >>>>> > +++ b/meta/recipes-devtools/qemu/qemu/qemu-2.5.0-cflags.patch >> >>>>> > @@ -1,8 +1,19 @@ >> >>>>> > +From 6702ec74a7ba90b99efedde260c9f08b75d5516d Mon Sep 17 00:00:00 >> >>>>> > 2001 >> >>>>> > +From: Stephen Arnold >> >>>>> > +Date: Sun, 12 Jun 2016 18:09:56 -0700 >> >>>>> > +Subject: [PATCH] qemu-native: set ld.bfd, fix cflags, and set >> some >> >>>>> > environment >> >>>>> > + >> >>>>> > Upstream-Status: Pending >> >>>>> > >> >>>>> > +--- >> >>>>> > + configure | 4 ---- >> >>>>> > + 1 file changed, 4 deletions(-) >> >>>>> > + >> >>>>> > +diff --git a/configure b/configure >> >>>>> > +index 69e05fb..12fc3d8 100755 >> >>>>> > --- a/configure >> >>>>> > +++ b/configure >> >>>>> > -@@ -4468,10 +4468,6 @@ fi >> >>>>> > +@@ -5413,10 +5413,6 @@ write_c_skeleton >> >>>>> > if test "$gcov" = "yes" ; then >> >>>>> > CFLAGS="-fprofile-arcs -ftest-coverage -g $CFLAGS" >> >>>>> > LDFLAGS="-fprofile-arcs -ftest-coverage $LDFLAGS" >> >>>>> > @@ -12,4 +23,4 @@ Upstream-Status: Pending >> >>>>> > - CFLAGS="-O2 $CFLAGS" >> >>>>> > fi >> >>>>> > >> >>>>> > - ########################################## >> >>>>> > + if test "$have_asan" = "yes"; then >> >>>>> > diff --git a/meta/recipes-devtools/qemu/qemu_2.11.1.bb >> >>>>> > b/meta/recipes-devtools/qemu/qemu_2.12.0.bb >> >>>>> > similarity index 87% >> >>>>> > rename from meta/recipes-devtools/qemu/qemu_2.11.1.bb >> >>>>> > rename to meta/recipes-devtools/qemu/qemu_2.12.0.bb >> >>>>> > index f4b7d69fca..63590fc9eb 100644 >> >>>>> > --- a/meta/recipes-devtools/qemu/qemu_2.11.1.bb >> >>>>> > +++ b/meta/recipes-devtools/qemu/qemu_2.12.0.bb >> >>>>> > @@ -20,8 +20,6 @@ SRC_URI = >> >>>>> > "http://wiki.qemu-project.org/download/${BP}.tar.bz2 \ >> >>>>> > >> file://chardev-connect-socket-to-a-spawned-command.patch >> >>>>> > \ >> >>>>> > file://apic-fixup-fallthrough-to-PIC.patch \ >> >>>>> > >> >>>>> > file://linux-user-Fix-webkitgtk-hangs-on-32-bit-x86-target.patch \ >> >>>>> > - file://memfd.patch \ >> >>>>> > - >> >>>>> > >> file://0001-arm-translate-a64-treat-DISAS_UPDATE-as-variant-of-D.patch \ >> >>>>> > " >> >>>>> > UPSTREAM_CHECK_REGEX = "qemu-(?P\d+\..*)\.tar" >> >>>>> > >> >>>>> > @@ -31,8 +29,8 @@ SRC_URI_append_class-native = " \ >> >>>>> > file://cpus.c-qemu_cpu_kick_thread_debugging.patch \ >> >>>>> > " >> >>>>> > >> >>>>> > -SRC_URI[md5sum] = "61cf862b6007eba4ac98247776af2e27" >> >>>>> > -SRC_URI[sha256sum] = >> >>>>> > "d9df2213ceed32e91dab7bc9dd19c1af83f91ba72c7aeef7605dfaaf81732ccb" >> >>>>> > +SRC_URI[md5sum] = "122fd7cdf241ff7eb1e42c0b503b5d1b" >> >>>>> > +SRC_URI[sha256sum] = >> >>>>> > "c9f4a147bc915d24df9784affc611a115f42d24720a89210b479f1ba7a3f679c" >> >>>>> > >> >>>>> > COMPATIBLE_HOST_mipsarchn32 = "null" >> >>>>> > COMPATIBLE_HOST_mipsarchn64 = "null" >> >>>>> > -- >> >>>>> > 2.17.0 >> >>>>> > >> >>>>> > -- >> >>>>> > _______________________________________________ >> >>>>> > Openembedded-core mailing list >> >>>>> > Openembedded-core@lists.openembedded.org >> >>>>> > http://lists.openembedded.org/mailman/listinfo/openembedded-core >> > >> > >> > -- >> > _______________________________________________ >> > Openembedded-core mailing list >> > Openembedded-core@lists.openembedded.org >> > http://lists.openembedded.org/mailman/listinfo/openembedded-core >> > >> >