From: Tom Warren <twarren.nvidia@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] pull request for u-boot-tegra/master into ARM/master
Date: Mon, 29 Oct 2012 16:49:34 -0700 [thread overview]
Message-ID: <CA+m5__Jte2QNsDKhBjgbmQ+hZx-YLKkZozU657pbyt1U7=oHOg@mail.gmail.com> (raw)
Albert,
Please pull u-boot-tegra/master into ARM/master. Thanks!
checkpatch is clean, and ./MAKEALL -a arm is clean (except for
previous failures not created by these patches). Note that the serial:
patch from Allen is already in u-boot/master, but is needed to get
u-boot-tegra binaries to work correctly.
The following changes since commit f04821a8ca714459481bd9fd315af2b5f92d99a6:
Albert ARIBAUD (1):
Merge remote-tracking branch 'u-boot-imx/master'
are available in the git repository at:
git://git.denx.de/u-boot-tegra master
Allen Martin (5):
SPL: make jump_to_image_no_args a weak symbol
tegra: move to common SPL framework
tegra20: initialize variable to avoid compiler warning
serial: remove calls to serial_assign()
arm720t: add back common.h include
Lucas Stach (2):
tegra: add Colibri T20 board support
tegra: nand: make ONFI detection work
Marc Dietrich (1):
tegra: move common features to a common makefile
Stephen Warren (10):
ARM: tegra: define CONFIG_SYS_BOOTMAPSZ
ARM: tegra: use standard variables to define load addresses
ARM: tegra: Harmony: enable ULPI USB port
ARM: tegra: Seaboard: enable multiple USB ports
ARM: tegra: Whistler: remove unused USB alias
ARM: enhance u-boot.lds to detect over-sized SPL
ARM: tegra: derive CONFIG_SPL_MAX_SIZE instead of hard-coding it
ARM: tegra: select between Seaboard/Ventana at compile time
ARM: tegra: don't request GPIO from Seaboard's SPL
ARM: tegra: combine duplicate Makefile rules
MAINTAINERS | 4 +
Makefile | 15 ++--
arch/arm/cpu/arm720t/interrupts.c | 2 +
arch/arm/cpu/arm720t/tegra-common/spl.c | 91 +++-----------------
arch/arm/cpu/tegra20-common/emc.c | 2 +-
arch/arm/cpu/u-boot.lds | 4 +
arch/arm/include/asm/arch-tegra20/spl.h | 28 ++++++
board/avionic-design/medcom-wide/Makefile | 6 +-
board/avionic-design/plutux/Makefile | 6 +-
board/avionic-design/tec/Makefile | 6 +-
board/compal/paz00/Makefile | 6 +-
board/compulab/trimslice/Makefile | 6 +-
board/nvidia/common/Makefile | 4 +-
board/nvidia/common/common.mk | 4 +
board/nvidia/dts/tegra20-harmony.dts | 3 +-
board/nvidia/dts/tegra20-whistler.dts | 5 +-
board/nvidia/harmony/harmony.c | 9 ++
board/nvidia/seaboard/seaboard.c | 18 +---
.../colibri_t20-common/colibri_t20-common.c | 44 ++++++++++
.../colibri_t20-common/colibri_t20-common.h | 16 ++++
board/toradex/colibri_t20_iris/Makefile | 40 +++++++++
board/toradex/colibri_t20_iris/colibri_t20_iris.c | 46 ++++++++++
board/toradex/dts/tegra20-colibri_t20_iris.dts | 38 ++++++++
boards.cfg | 1 +
common/cmd_nvedit.c | 3 -
common/iomux.c | 10 --
common/spl/spl.c | 8 +-
drivers/mtd/nand/tegra_nand.c | 36 ++++++++
include/configs/colibri_t20_iris.h | 83 ++++++++++++++++++
include/configs/harmony.h | 3 +
include/configs/seaboard.h | 1 +
include/configs/tegra-common-post.h | 32 ++++++-
include/configs/tegra20-common.h | 10 ++-
33 files changed, 455 insertions(+), 135 deletions(-)
create mode 100644 arch/arm/include/asm/arch-tegra20/spl.h
create mode 100644 board/nvidia/common/common.mk
create mode 100644 board/toradex/colibri_t20-common/colibri_t20-common.c
create mode 100644 board/toradex/colibri_t20-common/colibri_t20-common.h
create mode 100644 board/toradex/colibri_t20_iris/Makefile
create mode 100644 board/toradex/colibri_t20_iris/colibri_t20_iris.c
create mode 100644 board/toradex/dts/tegra20-colibri_t20_iris.dts
create mode 100644 include/configs/colibri_t20_iris.h
next reply other threads:[~2012-10-29 23:49 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-29 23:49 Tom Warren [this message]
2012-11-03 9:03 ` [U-Boot] pull request for u-boot-tegra/master into ARM/master Albert ARIBAUD
2012-11-16 17:14 Tom Warren
2012-11-16 21:27 ` Albert ARIBAUD
2012-11-16 21:45 ` Tom Warren
2012-11-16 23:33 ` Albert ARIBAUD
2012-11-16 23:42 ` Tom Warren
2012-11-17 0:12 ` Albert ARIBAUD
2012-11-19 15:39 ` Tom Warren
2012-11-19 17:12 ` Tom Warren
2012-11-20 6:21 ` Albert ARIBAUD
2013-01-18 16:00 Tom Warren
2013-01-18 16:06 ` Albert ARIBAUD
2013-03-15 15:25 Tom Warren
2013-03-15 20:46 ` Albert ARIBAUD
2013-03-25 17:43 Tom Warren
2013-03-26 10:12 ` Albert ARIBAUD
2013-04-15 23:28 Tom Warren
2013-04-16 17:17 ` Albert ARIBAUD
2013-04-16 19:55 ` Stephen Warren
2013-04-16 20:02 ` Tom Warren
2013-04-17 6:56 ` Albert ARIBAUD
2013-04-16 20:55 ` Albert ARIBAUD
2013-05-28 21:16 Tom Warren
2013-05-29 16:16 ` Albert ARIBAUD
2013-06-06 16:30 Tom Warren
2013-06-07 8:06 ` Albert ARIBAUD
2013-07-11 22:00 Tom Warren
2013-07-12 7:51 ` Albert ARIBAUD
2013-08-19 22:57 Tom Warren
2013-09-04 9:49 ` Albert ARIBAUD
2013-12-18 20:06 Tom Warren
2013-12-18 21:18 ` Albert ARIBAUD
2013-12-18 22:28 ` Tom Warren
2014-02-04 23:19 Tom Warren
2014-02-11 16:42 ` Stephen Warren
2014-02-11 16:48 ` Albert ARIBAUD
2014-02-11 16:59 ` Stephen Warren
2014-02-11 17:48 ` Albert ARIBAUD
2014-02-12 17:12 ` Albert ARIBAUD
2014-03-06 15:39 Tom Warren
2014-03-07 14:30 ` Albert ARIBAUD
2014-04-17 16:08 Tom Warren
2014-04-21 19:00 ` Albert ARIBAUD
2014-05-13 21:14 Tom Warren
2014-05-15 16:15 ` Albert ARIBAUD
2014-06-06 15:53 Tom Warren
2014-06-08 7:13 ` Albert ARIBAUD
2014-06-19 17:53 Tom Warren
2014-07-01 16:58 ` Albert ARIBAUD
2014-08-20 16:12 Tom Warren
2014-08-29 17:48 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CA+m5__Jte2QNsDKhBjgbmQ+hZx-YLKkZozU657pbyt1U7=oHOg@mail.gmail.com' \
--to=twarren.nvidia@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.