When there is no -g option in USERADD_PARAM_*, the default group name is same as the  created user name, so USERADD_PARAM_* will create the group when add the new user. GROUPADD_PARAM_* is redundant. Remove GROUPADD_PARAM_* lines directly and try again.


Best Regards,

Zhenhua

From: meta-freescale-bounces@yoctoproject.org [mailto:meta-freescale-bounces@yoctoproject.org] On Behalf Of GOPIKRISHNAN S
Sent: Tuesday, November 27, 2012 4:46 PM
To: meta-freescale@yoctoproject.org
Subject: [meta-freescale] (no subject)

I just did
$ rm -rf build<machine>
$ source ./fsl-setup-poky -m p2041rdb
$ bitbake fsl-image-minimal
$ bitbake vaminusers

Attached vaminusers.bb<http://vaminusers.bb>

Problem with useradd. First time
NOTE: package vaminusers-1.0-r0: task do_install: Started
ERROR: Function 'useradd_sysroot' failed (see /media/325GB_Drive/dev/QorIQ-SDK-V1.2-20120614-yocto/build_p2041rdb_release/tmp/work/ppce500mc-fsl-linux/vaminusers-1.0-r0/temp/log.do_install.19685 for further information)
ERROR: Logfile of failure stored in: /media/325GB_Drive/dev/QorIQ-SDK-V1.2-20120614-yocto/build_p2041rdb_release/tmp/work/ppce500mc-fsl-linux/vaminusers-1.0-r0/temp/log.do_install.19685
Log data follows:
| Running groupadd commands...
| Note: group vamin1 already exists, not re-creating it
| Note: group vamin already exists, not re-creating it
| Running useradd commands...
| useradd: group vamin1 exists - if you want to add this user to that group, use -g.
| WARNING: useradd command did not succeed. Retrying...
| useradd: group vamin1 exists - if you want to add this user to that group, use -g.
| WARNING: useradd command did not succeed. Retrying...
| useradd: group vamin1 exists - if you want to add this user to that group, use -g.
| WARNING: useradd command did not succeed. Retrying...
| useradd: group vamin1 exists - if you want to add this user to that group, use -g.
| WARNING: useradd command did not succeed. Retrying...
| useradd: group vamin1 exists - if you want to add this user to that group, use -g.
| WARNING: useradd command did not succeed. Retrying...
| useradd: group vamin1 exists - if you want to add this user to that group, use -g.
| WARNING: useradd command did not succeed. Retrying...
| useradd: group vamin1 exists - if you want to add this user to that group, use -g.
| WARNING: useradd command did not succeed. Retrying...
| useradd: group vamin1 exists - if you want to add this user to that group, use -g.
| WARNING: useradd command did not succeed. Retrying...
| useradd: group vamin1 exists - if you want to add this user to that group, use -g.
| WARNING: useradd command did not succeed. Retrying...
| useradd: group vamin1 exists - if you want to add this user to that group, use -g.
| WARNING: useradd command did not succeed. Retrying...
| ERROR: tried running useradd command 10 times without success, giving up
| ERROR: Function 'useradd_sysroot' failed (see /media/325GB_Drive/dev/QorIQ-SDK-V1.2-20120614-yocto/build_p2041rdb_release/tmp/work/ppce500mc-fsl-linux/vaminusers-1.0-r0/temp/log.do_install.19685 for further information)
NOTE: package vaminusers-1.0-r0: task do_install: Failed
ERROR: Task 2 (/media/325GB_Drive/dev/QorIQ-SDK-V1.2-20120614-yocto/meta-testing/recipes/vaminusers/vaminusers.bb<http://vaminusers.bb>, do_install) failed with exit code '1'
ERROR: '/media/325GB_Drive/dev/QorIQ-SDK-V1.2-20120614-yocto/meta-testing/recipes/vaminusers/vaminusers.bb<http://vaminusers.bb>' failed