Hi Yang,

On Thu, 20 May 2021 at 11:27, Yang Zhong <yang.zhong@intel.com> wrote:

> Hello all,
>
> I found the latest Qemu release can't bootup the VM with latest guest
> kernel(>5.13).
>
> The normal v6.0.0 release is good to bootup the latest guest kernel.
>
> There are two issues were found
> 1. Guest kernel panic.
> 2. kvm disabled by bios
>
> The panic log as below:
> [    2.250024] BUG: unable to handle page fault for address:
> ffffffffac06c55f
> [    2.252226] #PF: supervisor write access in kernel mode
> [    2.253892] #PF: error_code(0x0003) - permissions violation
> [    2.255671] PGD 5940e067 P4D 5940f067 PUD 59410063 PMD 580001e1
> [    2.257567] Oops: 0003 [#1] SMP NOPTI
> [    2.258738] CPU: 2 PID: 313 Comm: systemd-udevd Not tainted 5.13.0-rc1+
> #1
> [    2.260899] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
> 0.0.0 02/06/2015
> [    2.263375] RIP: 0010:__send_ipi_mask+0x1bf/0x240
> [    2.264855] Code: c0 48 c7 44 24 18 00 00 00 00 e9 48 ff ff ff 48 89 d0
> 4c 09 c8 74 1b 49 63 d7 48 63 74 24 0c b8 0a 00 00 00 4c 89 cb 4c 89 d1
> <0f> 01 d9 48 85 c0 78 4a 48 f7 04 24 00 02 00 00 0f 84 80 fe ff ff
> [    2.270643] RSP: 0018:ff591a62c0193ab0 EFLAGS: 00010006
> [    2.272277] RAX: 000000000000000a RBX: 0000000000000009 RCX:
> 0000000000000000
> [    2.274482] RDX: 0000000000000000 RSI: 00000000000000fc RDI:
> ff13a83dc003c830
> [    2.276663] RBP: ff591a62c0193b08 R08: 0000000000000004 R09:
> 0000000000000009
> [    2.278866] R10: 0000000000000000 R11: 0000000000000000 R12:
> 0000000000000000
> [    2.281065] R13: ff13a83dc003c830 R14: 0000000000011580 R15:
> 0000000000000000
> [    2.283272] FS:  00007f23ebd07940(0000) GS:ff13a83e3bd00000(0000)
> knlGS:0000000000000000
> [    2.285794] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [    2.287574] CR2: ffffffffac06c55f CR3: 0000000106ce2003 CR4:
> 0000000000771ee0
> [    2.289757] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
> 0000000000000000
> [    2.291972] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7:
> 0000000000000400
> [    2.294177] PKRU: 55555554
> [    2.295043] Call Trace:
> [    2.295820]  kvm_smp_send_call_func_ipi+0xe/0x60
> [    2.297220]  smp_call_function_many_cond+0x25d/0x2a0
> [    2.298772]  ? flush_tlb_one_kernel+0x20/0x20
> [    2.300145]  on_each_cpu_cond_mask+0x1e/0x20
> [    2.301514]  flush_tlb_kernel_range+0x8d/0x90
> [    2.302799]  __purge_vmap_area_lazy+0xc1/0x6a0
> [    2.304097]  ? cpumask_next+0x1f/0x20
> [    2.305160]  ? purge_fragmented_blocks_allcpus+0x3d/0x210
> [    2.306686]  _vm_unmap_aliases+0xf1/0x120
> [    2.307861]  change_page_attr_set_clr+0x95/0x280
> [    2.309203]  set_memory_ro+0x26/0x30
> [    2.310259]  ? 0xffffffffc00f7000
> [    2.311214]  module_enable_ro.part.58+0x62/0xc0
> [    2.312417]  do_init_module+0x17a/0x230
> [    2.313460]  load_module+0x1a30/0x1b00
> [    2.314463]  ? __do_sys_finit_module+0xad/0x110
> [    2.315702]  __do_sys_finit_module+0xad/0x110
> [    2.316890]  do_syscall_64+0x39/0x80
> [    2.317868]  entry_SYSCALL_64_after_hwframe+0x44/0xae
> [    2.319226] RIP: 0033:0x7f23ea8f32bd
>
>
> I also used the bisect to get the bad commit id:
> f5cc5a5c168674f84bf061cdb307c2d25fba5448
>
> This issue is known issue? or some fixs are ready to fix those issues?
> thanks!
>

What's your qemu command line?

I'm also having a kernel crash (although I think mine is with a different
call stack) when using "-cpu host". The crash doesn't occur when I use
"kvm64" cpu type.

    Gal.


>
> Regards,
>
> Yang
>
>
>
>