Re: [PATCH v3] media: ov8856: Add runtime PM callbacks

[Tomasz Figa <tfiga@chromium.org>]

Hi Hidenori,

On Wed, Sep 21, 2022 at 6:24 PM Hidenori Kobayashi
<hidenorik@chromium.org> wrote:
>
> There were no runtime PM callbacks registered, leaving regulators being
> enabled while the device is suspended on DT systems. Adjust and register
> existing power controlling functions to turn them off/on.
>
> Signed-off-by: Hidenori Kobayashi <hidenorik@chromium.org>
> ---
> V2 -> V3: Remove redundant wrappers (were added in V1)
> V1 -> V2: Change argument of power controlling functions
> ---
>  drivers/media/i2c/ov8856.c | 33 +++++++++++++++++++--------------
>  1 file changed, 19 insertions(+), 14 deletions(-)
>

Thanks for the patch!

Reviewed-by: Tomasz Figa <tfiga@chromium.org>

Best regards,
Tomasz

---

> diff --git a/drivers/media/i2c/ov8856.c b/drivers/media/i2c/ov8856.c
> index a9728afc81d4..760611ee5485 100644
> --- a/drivers/media/i2c/ov8856.c
> +++ b/drivers/media/i2c/ov8856.c
> @@ -2110,17 +2110,18 @@ static int ov8856_set_stream(struct v4l2_subdev *sd, int enable)
>         return ret;
>  }
>
> -static int __ov8856_power_on(struct ov8856 *ov8856)
> +static int ov8856_power_on(struct device *dev)
>  {
> -       struct i2c_client *client = v4l2_get_subdevdata(&ov8856->sd);
> +       struct v4l2_subdev *sd = dev_get_drvdata(dev);
> +       struct ov8856 *ov8856 = to_ov8856(sd);
>         int ret;
>
> -       if (is_acpi_node(dev_fwnode(&client->dev)))
> +       if (is_acpi_node(dev_fwnode(dev)))
>                 return 0;
>
>         ret = clk_prepare_enable(ov8856->xvclk);
>         if (ret < 0) {
> -               dev_err(&client->dev, "failed to enable xvclk\n");
> +               dev_err(dev, "failed to enable xvclk\n");
>                 return ret;
>         }
>
> @@ -2132,7 +2133,7 @@ static int __ov8856_power_on(struct ov8856 *ov8856)
>         ret = regulator_bulk_enable(ARRAY_SIZE(ov8856_supply_names),
>                                     ov8856->supplies);
>         if (ret < 0) {
> -               dev_err(&client->dev, "failed to enable regulators\n");
> +               dev_err(dev, "failed to enable regulators\n");
>                 goto disable_clk;
>         }
>
> @@ -2148,17 +2149,20 @@ static int __ov8856_power_on(struct ov8856 *ov8856)
>         return ret;
>  }
>
> -static void __ov8856_power_off(struct ov8856 *ov8856)
> +static int ov8856_power_off(struct device *dev)
>  {
> -       struct i2c_client *client = v4l2_get_subdevdata(&ov8856->sd);
> +       struct v4l2_subdev *sd = dev_get_drvdata(dev);
> +       struct ov8856 *ov8856 = to_ov8856(sd);
>
> -       if (is_acpi_node(dev_fwnode(&client->dev)))
> -               return;
> +       if (is_acpi_node(dev_fwnode(dev)))
> +               return 0;
>
>         gpiod_set_value_cansleep(ov8856->reset_gpio, 1);
>         regulator_bulk_disable(ARRAY_SIZE(ov8856_supply_names),
>                                ov8856->supplies);
>         clk_disable_unprepare(ov8856->xvclk);
> +
> +       return 0;
>  }
>
>  static int __maybe_unused ov8856_suspend(struct device *dev)
> @@ -2170,7 +2174,7 @@ static int __maybe_unused ov8856_suspend(struct device *dev)
>         if (ov8856->streaming)
>                 ov8856_stop_streaming(ov8856);
>
> -       __ov8856_power_off(ov8856);
> +       ov8856_power_off(dev);
>         mutex_unlock(&ov8856->mutex);
>
>         return 0;
> @@ -2184,7 +2188,7 @@ static int __maybe_unused ov8856_resume(struct device *dev)
>
>         mutex_lock(&ov8856->mutex);
>
> -       __ov8856_power_on(ov8856);
> +       ov8856_power_on(dev);
>         if (ov8856->streaming) {
>                 ret = ov8856_start_streaming(ov8856);
>                 if (ret) {
> @@ -2451,7 +2455,7 @@ static int ov8856_remove(struct i2c_client *client)
>         pm_runtime_disable(&client->dev);
>         mutex_destroy(&ov8856->mutex);
>
> -       __ov8856_power_off(ov8856);
> +       ov8856_power_off(&client->dev);
>
>         return 0;
>  }
> @@ -2477,7 +2481,7 @@ static int ov8856_probe(struct i2c_client *client)
>
>         full_power = acpi_dev_state_d0(&client->dev);
>         if (full_power) {
> -               ret = __ov8856_power_on(ov8856);
> +               ret = ov8856_power_on(&client->dev);
>                 if (ret) {
>                         dev_err(&client->dev, "failed to power on\n");
>                         return ret;
> @@ -2533,13 +2537,14 @@ static int ov8856_probe(struct i2c_client *client)
>         mutex_destroy(&ov8856->mutex);
>
>  probe_power_off:
> -       __ov8856_power_off(ov8856);
> +       ov8856_power_off(&client->dev);
>
>         return ret;
>  }
>
>  static const struct dev_pm_ops ov8856_pm_ops = {
>         SET_SYSTEM_SLEEP_PM_OPS(ov8856_suspend, ov8856_resume)
> +       SET_RUNTIME_PM_OPS(ov8856_power_off, ov8856_power_on, NULL)
>  };
>
>  #ifdef CONFIG_ACPI
> --
> 2.37.3.968.ga6b4b080e4-goog
>