From: David Mitchell <mr.david.mitchell@gmail.com>
To: linux-raid@vger.kernel.org
Subject: Superblock Missing
Date: Fri, 1 Sep 2017 20:52:23 -0400 [thread overview]
Message-ID: <CAANkkp+3WwZvKu60LkU_0VpxZvZuNrrE=qDt=4DPc80AO+sgEg@mail.gmail.com> (raw)
Respectfully requesting some help.
Very similar to what MasterPrenium posted last month, I'm struggling
to recover from a lost superblock after a grow operation.
I had a raid 5 array running since 2012 (metadata version .90) I
recently grew it from 2TB drives to 4TB.(metadata version 1.2) The
grow was successful and the array ran for approximately 2 weeks.
After that I booted to a LiveCD, changed out a boot drive (not in the
array) reinstalled Grub, etc.
After doing the work I rebooted and attempted to load the array.
With the new boot drive I didn't realize it at the time, but I was
missing the raid456 module. The array wouldn't load. I fixed the
kernel & module issues, and attempted to load but it said missing
superblock info. I was dumbfounded because the array had nothing to
do with the boot/OS drive.
Problem: Superblock not found
The hard drives are all good. All the logs looked clean, and after
several troubleshooting steps I eventually I ran the command
#mdadm --assemble --force /dev/md0 /dev/sdc1 /dev/sdd1 /dev/sde1
The array immediately went into a sync which completed successfully
the next day. Still no superblock.
The array starts fine now, but still no superblock.
mdadm --assemble /dev/md0 /dev/sdc1 /dev/sdd1 /dev/sde1
mdadm: /dev/md0 has been started with 3 drives.
virtual raid # dmesg
[177604.370207] md: md0 stopped.
[177604.385059] md: bind<sdd1>
[177604.385425] md: bind<sde1>
[177604.385591] md: bind<sdc1>
[177604.415558] md/raid:md0: device sdc1 operational as raid disk 0
[177604.415561] md/raid:md0: device sde1 operational as raid disk 2
[177604.415562] md/raid:md0: device sdd1 operational as raid disk 1
[177604.415850] md/raid:md0: allocated 3316kB
[177604.417538] md/raid:md0: raid level 5 active with 3 out of 3
devices, algorithm 2
[177604.417540] RAID conf printout:
[177604.417541] --- level:5 rd:3 wd:3
[177604.417543] disk 0, o:1, dev:sdc1
[177604.417544] disk 1, o:1, dev:sdd1
[177604.417545] disk 2, o:1, dev:sde1
[177604.417637] created bitmap (30 pages) for device md0
[177604.418110] md0: bitmap initialized from disk: read 2 pages, set 0
of 59518 bits
[177605.200213] md0: detected capacity change from 0 to 7988370735104
# mdadm --examine /dev/md0
mdadm: No md superblock detected on /dev/md0.
As a troubleshooting step I tried:
mdadm --grow /dev/md0 --size max
mdadm: component size of /dev/md0 unchanged at 3900571648K
I believe this shows the pre-grow size of 4TB, not the current correct
amount of 8TB
Any ideas (other than restore) would be appreciated.
Requested from "When Things Go Wrong"
-------------------------------------
# mdadm --examine /dev/sd[cde]1
/dev/sdc1:
Magic : a92b4efc
Version : 1.2
Feature Map : 0x1
Array UUID : 964fd303:748b8f0e:58f384ce:3fde97cc
Name : virtual:0 (local to host virtual)
Creation Time : Sat Aug 26 16:21:20 2017
Raid Level : raid5
Raid Devices : 3
Avail Dev Size : 7801143296 (3719.88 GiB 3994.19 GB)
Array Size : 7801143296 (7439.75 GiB 7988.37 GB)
Data Offset : 262144 sectors
Super Offset : 8 sectors
Unused Space : before=262056 sectors, after=0 sectors
State : clean
Device UUID : 77580f12:adf88476:d9c1448b:b041443f
Internal Bitmap : 8 sectors from superblock
Update Time : Thu Aug 31 22:21:32 2017
Bad Block Log : 512 entries available at offset 72 sectors
Checksum : adbbd4f2 - correct
Events : 6261
Layout : left-symmetric
Chunk Size : 512K
Device Role : Active device 0
Array State : AAA ('A' == active, '.' == missing, 'R' == replacing)
/dev/sdd1:
Magic : a92b4efc
Version : 1.2
Feature Map : 0x1
Array UUID : 964fd303:748b8f0e:58f384ce:3fde97cc
Name : virtual:0 (local to host virtual)
Creation Time : Sat Aug 26 16:21:20 2017
Raid Level : raid5
Raid Devices : 3
Avail Dev Size : 7801143296 (3719.88 GiB 3994.19 GB)
Array Size : 7801143296 (7439.75 GiB 7988.37 GB)
Data Offset : 262144 sectors
Super Offset : 8 sectors
Unused Space : before=262056 sectors, after=0 sectors
State : clean
Device UUID : 1cb11ccc:2aeb095d:6be1838b:7d7b33b7
Internal Bitmap : 8 sectors from superblock
Update Time : Thu Aug 31 22:21:32 2017
Bad Block Log : 512 entries available at offset 72 sectors
Checksum : c67c7975 - correct
Events : 6261
Layout : left-symmetric
Chunk Size : 512K
Device Role : Active device 1
Array State : AAA ('A' == active, '.' == missing, 'R' == replacing)
/dev/sde1:
Magic : a92b4efc
Version : 1.2
Feature Map : 0x1
Array UUID : 964fd303:748b8f0e:58f384ce:3fde97cc
Name : virtual:0 (local to host virtual)
Creation Time : Sat Aug 26 16:21:20 2017
Raid Level : raid5
Raid Devices : 3
Avail Dev Size : 7801143296 (3719.88 GiB 3994.19 GB)
Array Size : 7801143296 (7439.75 GiB 7988.37 GB)
Data Offset : 262144 sectors
Super Offset : 8 sectors
Unused Space : before=262056 sectors, after=0 sectors
State : clean
Device UUID : c322a4fb:ec99f835:0ce9cb45:ce6b376d
Internal Bitmap : 8 sectors from superblock
Update Time : Thu Aug 31 22:21:32 2017
Bad Block Log : 512 entries available at offset 72 sectors
Checksum : 3f3e91d2 - correct
Events : 6261
Layout : left-symmetric
Chunk Size : 512K
Device Role : Active device 2
Array State : AAA ('A' == active, '.' == missing, 'R' == replacing)
------------------------------------------------
# mdadm --detail /dev/md0
/dev/md0:
Version : 1.2
Creation Time : Sat Aug 26 16:21:20 2017
Raid Level : raid5
Array Size : 7801143296 (7439.75 GiB 7988.37 GB)
Used Dev Size : 3900571648 (3719.88 GiB 3994.19 GB)
Raid Devices : 3
Total Devices : 3
Persistence : Superblock is persistent
Intent Bitmap : Internal
Update Time : Thu Aug 31 22:21:32 2017
State : clean
Active Devices : 3
Working Devices : 3
Failed Devices : 0
Spare Devices : 0
Layout : left-symmetric
Chunk Size : 512K
Name : virtual:0 (local to host virtual)
UUID : 964fd303:748b8f0e:58f384ce:3fde97cc
Events : 6261
Number Major Minor RaidDevice State
0 8 33 0 active sync /dev/sdc1
1 8 49 1 active sync /dev/sdd1
3 8 65 2 active sync /dev/sde1
---------------------------------------------------------------------------
# ./lsdrv
PCI [ahci] 00:17.0 SATA controller: Intel Corporation Sunrise Point-H
SATA controller [AHCI mode] (rev 31)
├scsi 0:0:0:0 ATA HGST HTS541010A7 {S0A001SSGRU38K}
│└sda 931.51g [8:0] Partitioned (dos)
│ ├sda1 915.64g [8:1] ext4 {119f7409-bb57-4c82-a526-286a639779d6}
│ │└Mounted as /dev/sda1 @ /
│ ├sda2 1.00k [8:2] Partitioned (dos)
│ └sda5 15.87g [8:5] swap {f2217412-d4d6-4a6e-b699-7f2978db9423}
├scsi 1:0:0:0 ATA ST500LM012 HN-M5 {S2SVJ9CC509140}
│└sdb 465.76g [8:16] Partitioned (dos)
│ └sdb1 465.76g [8:17] ext4 {f155bd77-8924-400c-bab4-04b641338282}
├scsi 2:0:0:0 ATA WDC WD40EZRZ-00W {WD-WCC4E0XVVCXH}
│└sdc 3.64t [8:32] Partitioned (gpt)
│ └sdc1 3.63t [8:33] MD raid5 (0/3) (w/ sdd1,sde1) in_sync 'virtual:0'
{964fd303-748b-8f0e-58f3-84ce3fde97cc}
│ └md0 7.27t [9:0] MD v1.2 raid5 (3) clean, 512k Chunk
{964fd303:748b8f0e:58f384ce:3fde97cc}
│ Empty/Unknown
├scsi 3:x:x:x [Empty]
├scsi 4:0:0:0 ATA WDC WD40EZRX-00S {WD-WCC4E0992649}
│└sdd 3.64t [8:48] Partitioned (gpt)
│ └sdd1 3.63t [8:49] MD raid5 (1/3) (w/ sdc1,sde1) in_sync 'virtual:0'
{964fd303-748b-8f0e-58f3-84ce3fde97cc}
│ └md0 7.27t [9:0] MD v1.2 raid5 (3) clean, 512k Chunk
{964fd303:748b8f0e:58f384ce:3fde97cc}
│ Empty/Unknown
└scsi 5:0:0:0 ATA WDC WD40EZRZ-00W {WD-WCC4E6CV0S5R}
└sde 3.64t [8:64] Partitioned (gpt)
└sde1 3.63t [8:65] MD raid5 (2/3) (w/ sdc1,sdd1) in_sync 'virtual:0'
{964fd303-748b-8f0e-58f3-84ce3fde97cc}
└md0 7.27t [9:0] MD v1.2 raid5 (3) clean, 512k Chunk
{964fd303:748b8f0e:58f384ce:3fde97cc}
Empty/Unknown
PCI [pata_pdc2027x] 04:01.0 Mass storage controller: Promise
Technology, Inc. 20269 (rev 02)
├scsi 6:0:0:0 LITE-ON DVDRW SHW-160P6S {LITE-ON_DVDRW_SHW-160P6S}
│└sr0 1.00g [11:0] Empty/Unknown
└scsi 7:x:x:x [Empty]
Other Block Devices
├loop0 0.00k [7:0] Empty/Unknown
├loop1 0.00k [7:1] Empty/Unknown
├loop2 0.00k [7:2] Empty/Unknown
├loop3 0.00k [7:3] Empty/Unknown
├loop4 0.00k [7:4] Empty/Unknown
├loop5 0.00k [7:5] Empty/Unknown
├loop6 0.00k [7:6] Empty/Unknown
├loop7 0.00k [7:7] Empty/Unknown
├md127 0.00k [9:127] MD vnone () clear, None (None) None {None}
│ Empty/Unknown
├ram0 64.00m [1:0] Empty/Unknown
├ram1 64.00m [1:1] Empty/Unknown
├ram2 64.00m [1:2] Empty/Unknown
├ram3 64.00m [1:3] Empty/Unknown
├ram4 64.00m [1:4] Empty/Unknown
├ram5 64.00m [1:5] Empty/Unknown
├ram6 64.00m [1:6] Empty/Unknown
├ram7 64.00m [1:7] Empty/Unknown
├ram8 64.00m [1:8] Empty/Unknown
├ram9 64.00m [1:9] Empty/Unknown
├ram10 64.00m [1:10] Empty/Unknown
├ram11 64.00m [1:11] Empty/Unknown
├ram12 64.00m [1:12] Empty/Unknown
├ram13 64.00m [1:13] Empty/Unknown
├ram14 64.00m [1:14] Empty/Unknown
└ram15 64.00m [1:15] Empty/Unknown
-----------------------------------------------------------------
# cat /proc/mdstat
Personalities : [raid6] [raid5] [raid4] [linear] [multipath] [raid0]
[raid1] [raid10]
md0 : active raid5 sdc1[0] sde1[3] sdd1[1]
7801143296 blocks super 1.2 level 5, 512k chunk, algorithm 2 [3/3] [UUU]
bitmap: 0/30 pages [0KB], 65536KB chunk
unused devices: <none>
---------------------------------------------------------------
# smartctl --xall /dev/sdc
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-21-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: WDC WD40EZRZ-00WN9B0
Serial Number: WD-WCC (removed)
LU WWN Device Id: 5 0014ee 261e42d67
Firmware Version: 80.00A80
User Capacity: 4,000,753,476,096 bytes [4.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Thu Aug 31 22:30:51 2017 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test
routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (53280) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 532) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x7035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
3 Spin_Up_Time POS--K 204 181 021 - 6758
4 Start_Stop_Count -O--CK 100 100 000 - 120
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
7 Seek_Error_Rate -OSR-K 200 200 000 - 0
9 Power_On_Hours -O--CK 079 079 000 - 15652
10 Spin_Retry_Count -O--CK 100 100 000 - 0
11 Calibration_Retry_Count -O--CK 100 100 000 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 120
192 Power-Off_Retract_Count -O--CK 200 200 000 - 83
193 Load_Cycle_Count -O--CK 170 170 000 - 92101
194 Temperature_Celsius -O---K 123 109 000 - 29
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
197 Current_Pending_Sector -O--CK 200 200 000 - 0
198 Offline_Uncorrectable ----CK 200 200 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 6 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 SATA NCQ Queued Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
0xa8-0xb6 GPL,SL VS 1 Device vendor specific log
0xb7 GPL,SL VS 39 Device vendor specific log
0xbd GPL,SL VS 1 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xc1 GPL VS 93 Device vendor specific log
0xcf GPL VS 65535 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining
LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 0 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 258 (0x0102)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 29 Celsius
Power Cycle Min/Max Temperature: 29/32 Celsius
Lifetime Min/Max Temperature: 19/43 Celsius
Under/Over Temperature Limit Count: 0/0
Vendor specific:
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -41/85 Celsius
Temperature History Size (Index): 478 (109)
Index Estimated Time Temperature Celsius
110 2017-08-31 14:33 29 **********
... ..(476 skipped). .. **********
109 2017-08-31 22:30 29 **********
SCT Error Recovery Control command not supported
Device Statistics (GP/SMART Log 0x04) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 10 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 10 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x8000 4 178857 Vendor specific
# smartctl --xall /dev/sdd
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-21-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Green
Device Model: WDC WD40EZRX-00SPEB0
Serial Number: WD-WCC(removed)
LU WWN Device Id: 5 0014ee 2b47635c2
Firmware Version: 80.00A80
User Capacity: 4,000,753,476,096 bytes [4.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Thu Aug 31 22:30:54 2017 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test
routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (52020) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 520) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x7035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
3 Spin_Up_Time POS--K 202 171 021 - 6900
4 Start_Stop_Count -O--CK 092 092 000 - 8907
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
7 Seek_Error_Rate -OSR-K 100 253 000 - 0
9 Power_On_Hours -O--CK 075 075 000 - 18350
10 Spin_Retry_Count -O--CK 100 100 000 - 0
11 Calibration_Retry_Count -O--CK 100 100 000 - 0
12 Power_Cycle_Count -O--CK 099 099 000 - 1075
192 Power-Off_Retract_Count -O--CK 200 200 000 - 88
193 Load_Cycle_Count -O--CK 185 185 000 - 46420
194 Temperature_Celsius -O---K 119 098 000 - 33
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
197 Current_Pending_Sector -O--CK 200 200 000 - 0
198 Offline_Uncorrectable ----CK 200 200 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 6 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 SATA NCQ Queued Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
0xa8-0xb7 GPL,SL VS 1 Device vendor specific log
0xbd GPL,SL VS 1 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xc1 GPL VS 93 Device vendor specific log
0xcf GPL VS 65535 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 258 (0x0102)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 33 Celsius
Power Cycle Min/Max Temperature: 33/36 Celsius
Lifetime Min/Max Temperature: 13/54 Celsius
Under/Over Temperature Limit Count: 0/0
Vendor specific:
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -41/85 Celsius
Temperature History Size (Index): 478 (443)
Index Estimated Time Temperature Celsius
444 2017-08-31 14:33 34 ***************
... ..(426 skipped). .. ***************
393 2017-08-31 21:40 34 ***************
394 2017-08-31 21:41 33 **************
... ..( 6 skipped). .. **************
401 2017-08-31 21:48 33 **************
402 2017-08-31 21:49 34 ***************
403 2017-08-31 21:50 34 ***************
404 2017-08-31 21:51 33 **************
... ..( 32 skipped). .. **************
437 2017-08-31 22:24 33 **************
438 2017-08-31 22:25 34 ***************
... ..( 4 skipped). .. ***************
443 2017-08-31 22:30 34 ***************
SCT Error Recovery Control command not supported
Device Statistics (GP/SMART Log 0x04) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 10 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 10 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x8000 4 178859 Vendor specific
# smartctl --xall /dev/sde
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-21-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: WDC WD40EZRZ-00WN9B0
Serial Number: WD-WCC(removed)
LU WWN Device Id: 5 0014ee 2b73a30c5
Firmware Version: 80.00A80
User Capacity: 4,000,753,476,096 bytes [4.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Thu Aug 31 22:30:56 2017 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test
routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (50160) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 502) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x7035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
3 Spin_Up_Time POS--K 195 169 021 - 7208
4 Start_Stop_Count -O--CK 100 100 000 - 114
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
7 Seek_Error_Rate -OSR-K 200 200 000 - 0
9 Power_On_Hours -O--CK 079 079 000 - 15651
10 Spin_Retry_Count -O--CK 100 100 000 - 0
11 Calibration_Retry_Count -O--CK 100 100 000 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 114
192 Power-Off_Retract_Count -O--CK 200 200 000 - 77
193 Load_Cycle_Count -O--CK 170 170 000 - 92696
194 Temperature_Celsius -O---K 122 107 000 - 30
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
197 Current_Pending_Sector -O--CK 200 200 000 - 0
198 Offline_Uncorrectable ----CK 200 200 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 6 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 SATA NCQ Queued Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
0xa8-0xb6 GPL,SL VS 1 Device vendor specific log
0xb7 GPL,SL VS 39 Device vendor specific log
0xbd GPL,SL VS 1 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xc1 GPL VS 93 Device vendor specific log
0xcf GPL VS 65535 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining
LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 0 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 258 (0x0102)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 30 Celsius
Power Cycle Min/Max Temperature: 30/33 Celsius
Lifetime Min/Max Temperature: 20/45 Celsius
Under/Over Temperature Limit Count: 0/0
Vendor specific:
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -41/85 Celsius
Temperature History Size (Index): 478 (52)
Index Estimated Time Temperature Celsius
53 2017-08-31 14:33 31 ************
... ..( 87 skipped). .. ************
141 2017-08-31 16:01 31 ************
142 2017-08-31 16:02 32 *************
... ..( 18 skipped). .. *************
161 2017-08-31 16:21 32 *************
162 2017-08-31 16:22 31 ************
... ..( 93 skipped). .. ************
256 2017-08-31 17:56 31 ************
257 2017-08-31 17:57 30 ***********
... ..( 7 skipped). .. ***********
265 2017-08-31 18:05 30 ***********
266 2017-08-31 18:06 31 ************
267 2017-08-31 18:07 31 ************
268 2017-08-31 18:08 30 ***********
... ..( 5 skipped). .. ***********
274 2017-08-31 18:14 30 ***********
275 2017-08-31 18:15 31 ************
... ..(254 skipped). .. ************
52 2017-08-31 22:30 31 ************
SCT Error Recovery Control command not supported
Device Statistics (GP/SMART Log 0x04) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 9 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 10 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x8000 4 178860 Vendor specific
Sincerely,
David
next reply other threads:[~2017-09-02 0:52 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-09-02 0:52 David Mitchell [this message]
2017-09-02 1:43 ` Superblock Missing Andreas Klauer
2017-09-02 15:43 ` David Mitchell
2017-09-02 16:49 ` Andreas Klauer
2017-09-04 3:35 ` David Mitchell
2017-09-04 15:02 ` Wols Lists
2017-09-04 15:49 ` Andreas Klauer
2017-09-04 17:56 ` David Mitchell
2017-09-06 3:07 ` David Mitchell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAANkkp+3WwZvKu60LkU_0VpxZvZuNrrE=qDt=4DPc80AO+sgEg@mail.gmail.com' \
--to=mr.david.mitchell@gmail.com \
--cc=linux-raid@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.