All of lore.kernel.org
 help / color / mirror / Atom feed
From: Kai-Heng Feng <kai.heng.feng@canonical.com>
To: Bjorn Helgaas <helgaas@kernel.org>
Cc: Heiner Kallweit <hkallweit1@gmail.com>,
	nic_swsd <nic_swsd@realtek.com>,
	Bjorn Helgaas <bhelgaas@google.com>,
	David Miller <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	Anthony Wong <anthony.wong@canonical.com>,
	Linux Netdev List <netdev@vger.kernel.org>,
	Linux PCI <linux-pci@vger.kernel.org>,
	LKML <linux-kernel@vger.kernel.org>
Subject: Re: [RFC] [PATCH net-next v5 2/3] r8169: Use PCIe ASPM status for NIC ASPM enablement
Date: Fri, 1 Oct 2021 12:32:18 +0800	[thread overview]
Message-ID: <CAAd53p60Vjme9=zmVCF3WOt9iiqkZ6gprABDh1VSQyyKZbGkdw@mail.gmail.com> (raw)
In-Reply-To: <20210917152612.GA1717817@bjorn-Precision-5520>

On Fri, Sep 17, 2021 at 11:26 PM Bjorn Helgaas <helgaas@kernel.org> wrote:
>
> On Fri, Sep 17, 2021 at 12:09:08PM +0800, Kai-Heng Feng wrote:
> > On Fri, Sep 17, 2021 at 1:07 AM Bjorn Helgaas <helgaas@kernel.org> wrote:
> > > On Thu, Sep 16, 2021 at 11:44:16PM +0800, Kai-Heng Feng wrote:
> > > > Because ASPM control may not be granted by BIOS while ASPM is enabled,
> > > > and ASPM can be enabled via sysfs, so use pcie_aspm_enabled() directly
> > > > to check current ASPM enable status.
> > > >
> > > > Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
> > > > ---
> > > > v5:
> > > >  - New patch.
> > > >
> > > >  drivers/net/ethernet/realtek/r8169_main.c | 13 ++++++++-----
> > > >  1 file changed, 8 insertions(+), 5 deletions(-)
> > > >
> > > > diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c
> > > > index 0199914440abc..6f1a9bec40c05 100644
> > > > --- a/drivers/net/ethernet/realtek/r8169_main.c
> > > > +++ b/drivers/net/ethernet/realtek/r8169_main.c
> > > > @@ -622,7 +622,6 @@ struct rtl8169_private {
> > > >       } wk;
> > > >
> > > >       unsigned supports_gmii:1;
> > > > -     unsigned aspm_manageable:1;
> > > >       dma_addr_t counters_phys_addr;
> > > >       struct rtl8169_counters *counters;
> > > >       struct rtl8169_tc_offsets tc_offset;
> > > > @@ -2664,8 +2663,13 @@ static void rtl_enable_exit_l1(struct rtl8169_private *tp)
> > > >
> > > >  static void rtl_hw_aspm_clkreq_enable(struct rtl8169_private *tp, bool enable)
> > > >  {
> > > > -     /* Don't enable ASPM in the chip if OS can't control ASPM */
> > > > -     if (enable && tp->aspm_manageable) {
> > > > +     struct pci_dev *pdev = tp->pci_dev;
> > > > +
> > > > +     /* Don't enable ASPM in the chip if PCIe ASPM isn't enabled */
> > > > +     if (!pcie_aspm_enabled(pdev) && enable)
> > > > +             return;
> > >
> > > What happens when the user enables or disables ASPM via sysfs (see
> > > https://git.kernel.org/linus/72ea91afbfb0)?
> > >
> > > The driver is not going to know about that change.
> >
> > So it's still better to fold this patch into next one? So the periodic
> > delayed_work can toggle ASPM accordingly.
>
> No, my point is that the user can enable/disable ASPM via sysfs, and
> the driver will not know anything about it.  There's no callback that
> tells the driver when this happens.
>
> My question is whether this code works when that happens.  I doubt it
> works, because if ASPM is not enabled at this moment, you return
> without doing enabling ASPM in the chip below.
>
> If the user subsequently enables ASPM via sysfs, the chip setup below
> will not be done.
>
> If there's chip-specific setup to make ASPM work, I think the
> chip-specific part needs to be done unconditionally.

So it's either adding a callback to notify driver about ASPM change,
or doing chip-specific ASPM unconditionally.
Which one do you prefer?

Kai-Heng

>
> > > > +     if (enable) {
> > > >               RTL_W8(tp, Config5, RTL_R8(tp, Config5) | ASPM_en);
> > > >               RTL_W8(tp, Config2, RTL_R8(tp, Config2) | ClkReqEn);
> > > >       } else {
> > > > @@ -5272,8 +5276,7 @@ static int rtl_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
> > > >       /* Disable ASPM L1 as that cause random device stop working
> > > >        * problems as well as full system hangs for some PCIe devices users.
> > > >        */
> > > > -     rc = pci_disable_link_state(pdev, PCIE_LINK_STATE_L1);
> > > > -     tp->aspm_manageable = !rc;
> > > > +     pci_disable_link_state(pdev, PCIE_LINK_STATE_L1);
> > > >
> > > >       /* enable device (incl. PCI PM wakeup and hotplug setup) */
> > > >       rc = pcim_enable_device(pdev);
> > > > --
> > > > 2.32.0
> > > >

  reply	other threads:[~2021-10-01  4:32 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-09-16 15:44 [RFC] [PATCH net-next v5 0/3] r8169: Implement dynamic ASPM mechanism for recent 1.0/2.5Gbps Realtek NICs Kai-Heng Feng
2021-09-16 15:44 ` [RFC] [PATCH net-next v5 1/3] PCI/ASPM: Introduce a new helper to report ASPM capability Kai-Heng Feng
2021-09-16 15:44 ` [RFC] [PATCH net-next v5 2/3] r8169: Use PCIe ASPM status for NIC ASPM enablement Kai-Heng Feng
2021-09-16 17:07   ` Bjorn Helgaas
2021-09-17  4:09     ` Kai-Heng Feng
2021-09-17 15:26       ` Bjorn Helgaas
2021-10-01  4:32         ` Kai-Heng Feng [this message]
2021-09-16 15:44 ` [RFC] [PATCH net-next v5 3/3] r8169: Implement dynamic ASPM mechanism Kai-Heng Feng
2021-09-16 17:12   ` Bjorn Helgaas
2021-09-17  4:19     ` Kai-Heng Feng
2021-09-17 22:09 ` [RFC] [PATCH net-next v5 0/3] r8169: Implement dynamic ASPM mechanism for recent 1.0/2.5Gbps Realtek NICs Bjorn Helgaas
2021-10-01  4:17   ` Kai-Heng Feng
2021-10-07 19:10     ` Bjorn Helgaas
2021-10-08 13:56     ` Bjorn Helgaas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAAd53p60Vjme9=zmVCF3WOt9iiqkZ6gprABDh1VSQyyKZbGkdw@mail.gmail.com' \
    --to=kai.heng.feng@canonical.com \
    --cc=anthony.wong@canonical.com \
    --cc=bhelgaas@google.com \
    --cc=davem@davemloft.net \
    --cc=helgaas@kernel.org \
    --cc=hkallweit1@gmail.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=nic_swsd@realtek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.