From mboxrd@z Thu Jan 1 00:00:00 1970 From: Belisko Marek Date: Fri, 8 May 2020 23:39:19 +0200 Subject: raspberrypi cm3 v2019.07 not working In-Reply-To: References: Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Matthias, On Fri, May 8, 2020 at 11:28 PM Matthias Brugger wrote: > > Hi Marek, > > On 08/05/2020 21:52, Belisko Marek wrote: > > On Wed, May 6, 2020 at 11:02 PM Belisko Marek wrote: > >> > >> On Tue, May 5, 2020 at 10:18 PM Belisko Marek wrote: > >>> > >>> Hi, > >>> > >>> I'm trying to run 2019.07 u-boot on raspberrypi cm3 module but I got > >>> no feedback on console. When used 2018.01 it boots fine. Probably I > >>> need to do git bisect but maybe someone have some idea or experience > >>> what can cause that. Thanks. > >> I give a try 2020.01 and I got only this: > >> U-Boot 2020.01 (May 06 2020 - 20:09:45 +0000) > >> > >> DRAM: 948 MiB > >> RPI Compute Module 3 (0xa020a0) > >> > >> I'll try to debug it and let you know. > > Debug messages shows this: > > https://pastebin.com/2SwNzrb1 > > > > I tried to debug but I have no clue what is going one there. > > > > Also u-boot 2019.07 is not working at all on cm3 due to this commit > > (after bisect when reverted u-boot start working again): > > 143256b353c4d2ad1cf5e5e63b38410188b35e49 - fdt: update bcm283x device > > tree sources to Linux 5.1-rc6 state > > > > Any ideas hint how to resolve this issue? Thanks. > > > > Can you try to cherry-pick the following two patches to your tree: > 5051377a0b ("arm: dts: bcm283x: Rename U-Boot file") > 89e47e8eb6 ("fdt: fix bcm283x dm-pre-reloc definitions") But those are present in 2020.01 and this version at least print something to console but stuck somewhere (pls see pastebin log with debug enabled) I prefer to run 2020.01 ;). Thanks. > > Regards, > Matthias BR, marek