From mboxrd@z Thu Jan  1 00:00:00 1970
From: Anup Patel <anup@brainfault.org>
Date: Mon, 29 Jul 2019 14:10:18 +0530
Subject: [U-Boot] [PATCH v2 09/11] riscv: set default FIT generator
 script and build target for SPL builds
In-Reply-To: <20190728155723.3412-10-lukas.auer@aisec.fraunhofer.de>
References: <20190728155723.3412-1-lukas.auer@aisec.fraunhofer.de>
 <20190728155723.3412-10-lukas.auer@aisec.fraunhofer.de>
Message-ID: <CAAhSdy0FggEzckK7=4Gvx4XTQ3ctGCS6UGzfni3J9MGQ35bQbw@mail.gmail.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On Sun, Jul 28, 2019 at 9:30 PM Lukas Auer
<lukas.auer@aisec.fraunhofer.de> wrote:
>
> Now that we have a generic FIT generator script for RISC-V, set it as
> the default. To also build the FIT image by default, set the default
> build target to "u-boot.itb" if CONFIG_SPL_LOAD_FIT is enabled.
>
> Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
> Tested-by: Bin Meng <bmeng.cn@gmail.com>
> ---
>
> Changes in v2: None
>
>  Kconfig | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff --git a/Kconfig b/Kconfig
> index d2eb744e70..a78dd59a79 100644
> --- a/Kconfig
> +++ b/Kconfig
> @@ -250,7 +250,8 @@ config BUILD_TARGET
>         default "u-boot-with-spl.sfp" if TARGET_SOCFPGA_GEN5
>         default "u-boot-spl.kwb" if ARCH_MVEBU && SPL
>         default "u-boot-elf.srec" if RCAR_GEN3
> -       default "u-boot.itb" if SPL_LOAD_FIT && (ROCKCHIP_RK3399 || ARCH_SUNXI)
> +       default "u-boot.itb" if SPL_LOAD_FIT && (ROCKCHIP_RK3399 || \
> +                               ARCH_SUNXI || RISCV)
>         default "u-boot.kwb" if KIRKWOOD
>         default "u-boot-with-spl.bin" if ARCH_AT91 && SPL_NAND_SUPPORT
>         help
> @@ -463,6 +464,7 @@ config SPL_FIT_GENERATOR
>         depends on SPL_FIT
>         default "board/sunxi/mksunxi_fit_atf.sh" if SPL_LOAD_FIT && ARCH_SUNXI
>         default "arch/arm/mach-rockchip/make_fit_atf.py" if SPL_LOAD_FIT && ARCH_ROCKCHIP
> +       default "arch/riscv/lib/mkimage_fit_opensbi.sh" if SPL_LOAD_FIT && RISCV
>         help
>           Specifies a (platform specific) script file to generate the FIT
>           source file used to build the U-Boot FIT image file. This gets
> --
> 2.21.0
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> https://lists.denx.de/listinfo/u-boot

Reviewed-by: Anup Patel <anup.patel@wdc.com>

Regards,
Anup