From mboxrd@z Thu Jan  1 00:00:00 1970
From: Anup Patel <anup@brainfault.org>
Date: Fri, 26 Jul 2019 08:05:08 +0530
Subject: [U-Boot] [PATCH v10 4/4] doc: sifive-fu540: Update README to
 explicitly load DTB for Linux
In-Reply-To: <CANr=Z=ZDd=DHnxUGoXd12pj-r5TrVjks2nejcd0djrAvdwbaAA@mail.gmail.com>
References: <20190722073732.2616-1-anup.patel@wdc.com>
 <20190722073732.2616-5-anup.patel@wdc.com>
 <CANr=Z=ZDd=DHnxUGoXd12pj-r5TrVjks2nejcd0djrAvdwbaAA@mail.gmail.com>
Message-ID: <CAAhSdy2hp3nm33OJ_XoE0B+b2KB2OK+xOvO181j8Ncrrs1PspQ@mail.gmail.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On Fri, Jul 26, 2019 at 12:27 AM Joe Hershberger <joe.hershberger@ni.com> wrote:
>
> On Mon, Jul 22, 2019 at 2:59 AM Anup Patel <Anup.Patel@wdc.com> wrote:
> >
> > We should explicitly load DTB from TFTP server or MMC/SD card
> > for Linux booting. This will allow us:
> > 1. To use different Linux DTB for SiFive Unleashed board with
> >    expansion board connected.
> > 2. Avoid re-flashing OpenSBI firmware whenever board connections
> >    change.
> >
> > This patch updates reference bootlog in SiFive FU540 README
> > as-per above.
> >
> > Signed-off-by: Anup Patel <anup.patel@wdc.com>
>
> Bad luck... This patch conflicts with [1] that recently went into
> mainline from Bin.
>
> Please rework and resend.

No problem, I will rework this patch.

Thanks,
Anup

>
> Thanks,
> -Joe
>
> [1] - https://patchwork.ozlabs.org/patch/1133598/
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> https://lists.denx.de/listinfo/u-boot