I need EGLFS on mx6, does this question mean there are issues with fido and
that I should stick with dizzy for now?

On Thu, Jun 18, 2015 at 12:05 PM, Otavio Salvador <otavio@ossystems.com.br>
wrote:

> Hello,
>
> We have some customers which are migrating from Dizzy for Fido. Some
> uses Qt5 applications in EGLFS mode and we found a serious regression,
> every EGLFS application is returning:
>
> EGL Error : Could not create the egl surface: error = 0x3003
>
> Using 3.10.17, from Dizzy, very same application works fine.
>
> To reproduce:
>
>  - fsl-community-bsp - fido
>  - add meta-qt5
>  - generate an image with cinematicexperience and qtbase-plugins included
>  - run the app passing "-platform eglfs"
>
> To narrow down the issue to the BSP, the meta-qt5 fido branch was used
> for both tests (Qt5 5.4.2).
>
> Does some faced the same issue?
>
> --
> Otavio Salvador                             O.S. Systems
> http://www.ossystems.com.br        http://code.ossystems.com.br
> Mobile: +55 (53) 9981-7854            Mobile: +1 (347) 903-9750
> --
> _______________________________________________
> meta-freescale mailing list
> meta-freescale@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-freescale
>