* [Buildroot] [PATCH v3 0/2] Add support for BSH smm s2 [pro] boards
@ 2022-07-13 6:30 Dario Binacchi
2022-07-13 6:30 ` [Buildroot] [PATCH v3 1/2] configs/imx8mn_bsh_smm_s2_defconfig: new defconfig Dario Binacchi
2022-07-13 6:30 ` [Buildroot] [PATCH v3 2/2] configs/imx8mn_bsh_smm_s2_pro_defconfig: " Dario Binacchi
0 siblings, 2 replies; 7+ messages in thread
From: Dario Binacchi @ 2022-07-13 6:30 UTC (permalink / raw)
To: buildroot
Cc: linux-amarula, Dario Binacchi, Michael Trimarchi, Ariel D'Alessandro
The series applies the changes requested by Arnout Vandecappelle to the
V3 patch for adding support to BSH smm s2 pro board ([1]). It also adds
the support for the BSH smm s2 board and It builds the uuu package, used
for flashing the boards, as part of buildroot.
[1] https://patchwork.ozlabs.org/project/buildroot/patch/20220131145555.2819020-1-michael@amarulasolutions.com/
Changes in v3:
- Update the commit description.
- Bump U-Boot to version 2022-07.
- Remove U-Boot patches merged in version 2022-07.
- Update the Linux patches.
Changes in v2:
- Drop the patch that added the 'uuu' package. It has been merged.
- Patch 1/2: "configs/imx8mn_bsh_smm_s2_defconfig: new defconfig":
- Change commit subject and description.
- Update linux patch to version 4. It hasn't been merged yet but has
been reviewed. This is the most up-to-date version.
- Replace `Co-developed-by:' tag with `Co-authored-by'.
- Use the buildroot's output directory if the binaries directory is
not passed as a parameter to the `flash.sh' script.
- Replace the linux.config file with an architectural defconfig and
a config fragment for the changes.
- Remove useless and deprecated statements in nand-full.lst.
- Remove the buildroot configurations for ext2/ext4 filesystem creation.
- Patch 2/2: "configs/imx8mn_bsh_smm_s2_pro_defconfig: new defconfig":
- Change commit subject line.
- Use the buildroot's output directory if the binaries directory is
not passed as a parameter to the `flash.sh' script.
- Replace the linux.config file with an architectural defconfig and
a config fragment for the changes.
Dario Binacchi (1):
configs/imx8mn_bsh_smm_s2_defconfig: new defconfig
Michael Trimarchi (1):
configs/imx8mn_bsh_smm_s2_pro_defconfig: new defconfig
DEVELOPERS | 8 +
.../common/imx8mn-bsh-smm-s2/linux.fragment | 931 ++++++++++++++++++
board/bsh/imx8mn-bsh-smm-s2-pro/extlinux.conf | 4 +
board/bsh/imx8mn-bsh-smm-s2-pro/flash.sh | 23 +
board/bsh/imx8mn-bsh-smm-s2-pro/genimage.cfg | 17 +
board/bsh/imx8mn-bsh-smm-s2-pro/post-build.sh | 7 +
board/bsh/imx8mn-bsh-smm-s2-pro/post-image.sh | 3 +
board/bsh/imx8mn-bsh-smm-s2-pro/readme.txt | 73 ++
board/bsh/imx8mn-bsh-smm-s2/flash.sh | 26 +
board/bsh/imx8mn-bsh-smm-s2/nand-full.lst | 29 +
...dmaengine-mxs-fix-driver-registering.patch | 69 ++
..._nand-Fix-specific-hook-registration.patch | 78 ++
...-mxs_nand_spl-Fix-bad-block-skipping.patch | 165 ++++
...x-cmd_nandbcb-fix-bad-block-handling.patch | 95 ++
...d-Fix-bad-block-handling-in-fitImage.patch | 42 +
...h-to-nand-spl-load-instead-of-romapi.patch | 30 +
...Remove-rootwait-1-to-all-the-affecte.patch | 159 +++
...gs-imx8mn_bsh_smm_s2-add-NAND-driver.patch | 42 +
...s-imx8mn_bsh_smm_s2-add-UBI-commands.patch | 29 +
...sh_smm_s2-remove-console-from-bootar.patch | 32 +
..._bsh_smm_s2-add-mtdparts-to-bootargs.patch | 30 +
board/bsh/imx8mn-bsh-smm-s2/post-build.sh | 4 +
board/bsh/imx8mn-bsh-smm-s2/readme.txt | 75 ++
configs/imx8mn_bsh_smm_s2_defconfig | 40 +
configs/imx8mn_bsh_smm_s2_pro_defconfig | 41 +
25 files changed, 2052 insertions(+)
create mode 100644 board/bsh/common/imx8mn-bsh-smm-s2/linux.fragment
create mode 100644 board/bsh/imx8mn-bsh-smm-s2-pro/extlinux.conf
create mode 100755 board/bsh/imx8mn-bsh-smm-s2-pro/flash.sh
create mode 100644 board/bsh/imx8mn-bsh-smm-s2-pro/genimage.cfg
create mode 100755 board/bsh/imx8mn-bsh-smm-s2-pro/post-build.sh
create mode 100755 board/bsh/imx8mn-bsh-smm-s2-pro/post-image.sh
create mode 100644 board/bsh/imx8mn-bsh-smm-s2-pro/readme.txt
create mode 100755 board/bsh/imx8mn-bsh-smm-s2/flash.sh
create mode 100644 board/bsh/imx8mn-bsh-smm-s2/nand-full.lst
create mode 100644 board/bsh/imx8mn-bsh-smm-s2/patches/linux/0001-dmaengine-mxs-fix-driver-registering.patch
create mode 100644 board/bsh/imx8mn-bsh-smm-s2/patches/uboot/0001-nand-raw-mxs_nand-Fix-specific-hook-registration.patch
create mode 100644 board/bsh/imx8mn-bsh-smm-s2/patches/uboot/0002-mtd-nand-mxs_nand_spl-Fix-bad-block-skipping.patch
create mode 100644 board/bsh/imx8mn-bsh-smm-s2/patches/uboot/0003-arm-mach-imx-cmd_nandbcb-fix-bad-block-handling.patch
create mode 100644 board/bsh/imx8mn-bsh-smm-s2/patches/uboot/0004-spl-spl_nand-Fix-bad-block-handling-in-fitImage.patch
create mode 100644 board/bsh/imx8mn-bsh-smm-s2/patches/uboot/0005-board-bsh-Switch-to-nand-spl-load-instead-of-romapi.patch
create mode 100644 board/bsh/imx8mn-bsh-smm-s2/patches/uboot/0006-include-configs-Remove-rootwait-1-to-all-the-affecte.patch
create mode 100644 board/bsh/imx8mn-bsh-smm-s2/patches/uboot/0007-configs-imx8mn_bsh_smm_s2-add-NAND-driver.patch
create mode 100644 board/bsh/imx8mn-bsh-smm-s2/patches/uboot/0008-configs-imx8mn_bsh_smm_s2-add-UBI-commands.patch
create mode 100644 board/bsh/imx8mn-bsh-smm-s2/patches/uboot/0009-configs-imx8mn_bsh_smm_s2-remove-console-from-bootar.patch
create mode 100644 board/bsh/imx8mn-bsh-smm-s2/patches/uboot/0010-configs-imx8mn_bsh_smm_s2-add-mtdparts-to-bootargs.patch
create mode 100755 board/bsh/imx8mn-bsh-smm-s2/post-build.sh
create mode 100644 board/bsh/imx8mn-bsh-smm-s2/readme.txt
create mode 100644 configs/imx8mn_bsh_smm_s2_defconfig
create mode 100644 configs/imx8mn_bsh_smm_s2_pro_defconfig
--
2.32.0
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply [flat|nested] 7+ messages in thread
* [Buildroot] [PATCH v3 1/2] configs/imx8mn_bsh_smm_s2_defconfig: new defconfig
2022-07-13 6:30 [Buildroot] [PATCH v3 0/2] Add support for BSH smm s2 [pro] boards Dario Binacchi
@ 2022-07-13 6:30 ` Dario Binacchi
2022-07-29 21:19 ` Giulio Benetti
2022-07-13 6:30 ` [Buildroot] [PATCH v3 2/2] configs/imx8mn_bsh_smm_s2_pro_defconfig: " Dario Binacchi
1 sibling, 1 reply; 7+ messages in thread
From: Dario Binacchi @ 2022-07-13 6:30 UTC (permalink / raw)
To: buildroot
Cc: linux-amarula, Dario Binacchi, Michael Trimarchi, Ariel D'Alessandro
BSH SMM S2 (SystemMaster S2) Board is an add-on board which provide
input and output interfaces to a dedicated carrier board. It is designed
mainly to provide graphical/video and connectivity interfaces to the
appliance.
Board support package includes the following components:
- mainline Linux kernel 5.18
- mainline U-Boot 2022-07
- default packages from buildroot
Patches applied to the Linux kernel and U-Boot have been submitted but
not merged yet.
Co-authored-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
---
Changes in v3:
- Update the commit description.
- Bump U-Boot to version 2022-07.
- Remove U-Boot patches merged in version 2022-07.
- Update the Linux patches.
Changes in v2:
- Change commit subject and description.
- Update linux patch to version 4. It hasn't been merged yet but has
been reviewed. This is the most up-to-date version.
- Replace `Co-developed-by:' tag with `Co-authored-by'.
- Use the buildroot's output directory if the binaries directory is
not passed as a parameter to the `flash.sh' script.
- Replace the linux.config file with an architectural defconfig and
a config fragment for the changes.
- Remove useless and deprecated statements in nand-full.lst.
- Remove the buildroot configurations for ext2/ext4 filesystem creation.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
---
DEVELOPERS | 4 +
board/bsh/imx8mn-bsh-smm-s2/flash.sh | 26 +
board/bsh/imx8mn-bsh-smm-s2/linux.fragment | 931 ++++++++++++++++++
board/bsh/imx8mn-bsh-smm-s2/nand-full.lst | 29 +
...ine-mxs-use-platform_driver_register.patch | 64 ++
...2-dmaengine-mxs-fix-section-mismatch.patch | 35 +
...Remove-rootwait-1-to-all-the-affecte.patch | 159 +++
board/bsh/imx8mn-bsh-smm-s2/post-build.sh | 4 +
board/bsh/imx8mn-bsh-smm-s2/readme.txt | 75 ++
configs/imx8mn_bsh_smm_s2_defconfig | 40 +
10 files changed, 1367 insertions(+)
create mode 100755 board/bsh/imx8mn-bsh-smm-s2/flash.sh
create mode 100644 board/bsh/imx8mn-bsh-smm-s2/linux.fragment
create mode 100644 board/bsh/imx8mn-bsh-smm-s2/nand-full.lst
create mode 100644 board/bsh/imx8mn-bsh-smm-s2/patches/linux/0001-dmaengine-mxs-use-platform_driver_register.patch
create mode 100644 board/bsh/imx8mn-bsh-smm-s2/patches/linux/0002-dmaengine-mxs-fix-section-mismatch.patch
create mode 100644 board/bsh/imx8mn-bsh-smm-s2/patches/uboot/0001-include-configs-Remove-rootwait-1-to-all-the-affecte.patch
create mode 100755 board/bsh/imx8mn-bsh-smm-s2/post-build.sh
create mode 100644 board/bsh/imx8mn-bsh-smm-s2/readme.txt
create mode 100644 configs/imx8mn_bsh_smm_s2_defconfig
diff --git a/DEVELOPERS b/DEVELOPERS
index 0afd697b6cc6..33a77f462166 100644
--- a/DEVELOPERS
+++ b/DEVELOPERS
@@ -657,6 +657,8 @@ F: package/luaexpat/
F: package/xinetd/
N: Dario Binacchi <dario.binacchi@amarulasolutions.com>
+F: board/bsh/
+F: configs/imx8mn_bsh_smm_s2_defconfig
F: package/uuu/
N: Dario Binacchi <dariobin@libero.it>
@@ -2045,6 +2047,8 @@ F: package/python-crc16/
F: package/python-pyzmq/
N: Michael Trimarchi <michael@amarulasolutions.com>
+F: board/bsh/
+F: configs/imx8mn_bsh_smm_s2_defconfig
F: package/python-spidev/
N: Michael Vetter <jubalh@iodoru.org>
diff --git a/board/bsh/imx8mn-bsh-smm-s2/flash.sh b/board/bsh/imx8mn-bsh-smm-s2/flash.sh
new file mode 100755
index 000000000000..1f343d516dcf
--- /dev/null
+++ b/board/bsh/imx8mn-bsh-smm-s2/flash.sh
@@ -0,0 +1,26 @@
+#!/bin/bash
+
+if [ $# -eq 0 ]; then
+ OUTPUT_DIR=output
+else
+ OUTPUT_DIR=$1
+fi
+
+if ! test -d "${OUTPUT_DIR}" ; then
+ echo "ERROR: no output directory specified."
+ echo "Usage: $0 OUTPUT_DIR"
+ echo ""
+ echo "Arguments:"
+ echo " OUTPUT_DIR The Buildroot output directory."
+ exit 1
+fi
+
+IMAGES_DIR=${OUTPUT_DIR}/images
+
+${OUTPUT_DIR}/host/bin/uuu -v -b ${IMAGES_DIR}/nand-full.lst \
+ ${IMAGES_DIR}/flash.bin \
+ ${IMAGES_DIR}/flash.bin \
+ ${IMAGES_DIR}/rootfs.ubifs \
+ ${IMAGES_DIR}/Image \
+ ${IMAGES_DIR}/freescale/imx8mn-bsh-smm-s2.dtb
+
diff --git a/board/bsh/imx8mn-bsh-smm-s2/linux.fragment b/board/bsh/imx8mn-bsh-smm-s2/linux.fragment
new file mode 100644
index 000000000000..7388b7f1277c
--- /dev/null
+++ b/board/bsh/imx8mn-bsh-smm-s2/linux.fragment
@@ -0,0 +1,931 @@
+# CONFIG_BPF_SYSCALL is not set
+# CONFIG_BPF_UNPRIV_DEFAULT_OFF is not set
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_CGROUP_FREEZER=y
+# CONFIG_CGROUP_BPF is not set
+CONFIG_RELAY=y
+# CONFIG_ARCH_ACTIONS is not set
+# CONFIG_ARCH_SUNXI is not set
+# CONFIG_ARCH_ALPINE is not set
+# CONFIG_ARCH_APPLE is not set
+# CONFIG_ARCH_BCM2835 is not set
+# CONFIG_ARCH_BCM4908 is not set
+# CONFIG_ARCH_BCM_IPROC is not set
+# CONFIG_ARCH_BERLIN is not set
+# CONFIG_ARCH_BRCMSTB is not set
+# CONFIG_ARCH_EXYNOS is not set
+# CONFIG_ARCH_K3 is not set
+# CONFIG_ARCH_LAYERSCAPE is not set
+# CONFIG_ARCH_LG1K is not set
+# CONFIG_ARCH_HISI is not set
+# CONFIG_ARCH_KEEMBAY is not set
+# CONFIG_ARCH_MEDIATEK is not set
+# CONFIG_ARCH_MESON is not set
+# CONFIG_ARCH_MVEBU is not set
+# CONFIG_ARCH_QCOM is not set
+# CONFIG_ARCH_RENESAS is not set
+# CONFIG_ARCH_ROCKCHIP is not set
+# CONFIG_ARCH_S32 is not set
+# CONFIG_ARCH_SEATTLE is not set
+# CONFIG_ARCH_INTEL_SOCFPGA is not set
+# CONFIG_ARCH_SYNQUACER is not set
+# CONFIG_ARCH_TEGRA is not set
+# CONFIG_ARCH_TESLA_FSD is not set
+# CONFIG_ARCH_SPRD is not set
+# CONFIG_ARCH_THUNDER is not set
+# CONFIG_ARCH_THUNDER2 is not set
+# CONFIG_ARCH_UNIPHIER is not set
+# CONFIG_ARCH_VEXPRESS is not set
+# CONFIG_ARCH_VISCONTI is not set
+# CONFIG_ARCH_XGENE is not set
+# CONFIG_ARCH_ZYNQMP is not set
+# CONFIG_PARAVIRT is not set
+# CONFIG_KEXEC is not set
+# CONFIG_KEXEC_FILE is not set
+# CONFIG_XEN is not set
+# CONFIG_ARM64_PTR_AUTH is not set
+# CONFIG_ARM64_TLB_RANGE is not set
+# CONFIG_ARM64_MTE is not set
+CONFIG_PM_DEBUG=y
+CONFIG_PM_TEST_SUSPEND=y
+# CONFIG_HIBERNATION is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
+CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
+# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
+# CONFIG_ARM_ALLWINNER_SUN50I_CPUFREQ_NVMEM is not set
+# CONFIG_ARM_ARMADA_37XX_CPUFREQ is not set
+CONFIG_ARM_IMX_CPUFREQ_DT=y
+# CONFIG_ARM_QCOM_CPUFREQ_NVMEM is not set
+# CONFIG_ARM_QCOM_CPUFREQ_HW is not set
+# CONFIG_ARM_RASPBERRYPI_CPUFREQ is not set
+# CONFIG_ARM_SCMI_CPUFREQ is not set
+# CONFIG_ARM_TEGRA186_CPUFREQ is not set
+# CONFIG_ARM_MEDIATEK_CPUFREQ is not set
+# CONFIG_QORIQ_CPUFREQ is not set
+# CONFIG_ACPI_APEI_PCIEAER is not set
+# CONFIG_VIRTUALIZATION is not set
+# CONFIG_KVM is not set
+# CONFIG_GCC_PLUGINS is not set
+CONFIG_SECCOMP=y
+CONFIG_IPV6=y
+CONFIG_MODVERSIONS=y
+CONFIG_IPV6_SIT=m
+# CONFIG_NET_DSA_TAG_BRCM is not set
+# CONFIG_NET_DSA_TAG_BRCM_LEGACY is not set
+# CONFIG_NET_DSA_TAG_BRCM_PREPEND is not set
+CONFIG_NET_DSA_TAG_OCELOT=m
+# CONFIG_NET_DSA_TAG_OCELOT_8021Q is not set
+CONFIG_VLAN_8021Q=y
+CONFIG_LLC2=y
+CONFIG_NET_SCH_MULTIQ=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_PKTGEN=m
+CONFIG_BT=y
+CONFIG_BT_LE=y
+CONFIG_BT_RFCOMM=y
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=y
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=y
+# CONFIG_CAN_RCAR is not set
+# CONFIG_CAN_RCAR_CANFD is not set
+# CONFIG_CAN_MCP251XFD is not set
+CONFIG_BT_HCIUART=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_ATH3K=y
+CONFIG_BT_HCIUART_3WIRE=y
+CONFIG_BT_HCIVHCI=y
+CONFIG_CFG80211=y
+CONFIG_NL80211_TESTMODE=y
+CONFIG_CFG80211_WEXT=y
+CONFIG_MAC80211=y
+# CONFIG_BT_HCIUART_MRVL is not set
+# CONFIG_BT_MRVL is not set
+# CONFIG_BT_MRVL_SDIO is not set
+# CONFIG_RFKILL is not set
+# CONFIG_PCI is not set
+# CONFIG_PCIEPORTBUS is not set
+# CONFIG_PCIEAER is not set
+# CONFIG_PCI_IOV is not set
+# CONFIG_PCI_PASID is not set
+# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HOTPLUG_PCI_ACPI is not set
+# CONFIG_PCI_AARDVARK is not set
+# CONFIG_PCI_TEGRA is not set
+# CONFIG_PCIE_RCAR_HOST is not set
+# CONFIG_PCIE_RCAR_EP is not set
+# CONFIG_PCI_HOST_GENERIC is not set
+# CONFIG_PCI_XGENE is not set
+# CONFIG_PCIE_ALTERA is not set
+# CONFIG_PCIE_ALTERA_MSI is not set
+# CONFIG_PCI_HOST_THUNDER_PEM is not set
+# CONFIG_PCI_HOST_THUNDER_ECAM is not set
+# CONFIG_PCIE_ROCKCHIP_HOST is not set
+# CONFIG_PCIE_BRCMSTB is not set
+# CONFIG_PCI_IMX6 is not set
+# CONFIG_PCI_LAYERSCAPE is not set
+# CONFIG_PCI_HISI is not set
+# CONFIG_PCIE_QCOM is not set
+# CONFIG_PCIE_ARMADA_8K is not set
+# CONFIG_PCIE_KIRIN is not set
+# CONFIG_PCIE_HISI_STB is not set
+# CONFIG_PCIE_TEGRA194_HOST is not set
+# CONFIG_PCIE_VISCONTI_HOST is not set
+# CONFIG_PCIE_LAYERSCAPE_GEN4 is not set
+# CONFIG_PCI_ENDPOINT is not set
+# CONFIG_PCI_ENDPOINT_CONFIGFS is not set
+# CONFIG_PCI_EPF_TEST is not set
+CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
+CONFIG_BRCMSTB_GISB_ARB=y
+CONFIG_VEXPRESS_CONFIG=y
+# CONFIG_HISILICON_LPC is not set
+# CONFIG_TEGRA_ACONNECT is not set
+# CONFIG_RASPBERRYPI_FIRMWARE is not set
+# CONFIG_INTEL_STRATIX10_SERVICE is not set
+# CONFIG_INTEL_STRATIX10_RSU is not set
+CONFIG_IMX_DSP=y
+# CONFIG_GNSS is not set
+# CONFIG_GNSS_MTK_SERIAL is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_NAND_BRCMNAND is not set
+CONFIG_MTD_NAND_GPMI_NAND=y
+# CONFIG_MTD_NAND_MARVELL is not set
+# CONFIG_MTD_NAND_FSL_IFC is not set
+# CONFIG_MTD_NAND_QCOM is not set
+# CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
+CONFIG_MTD_UBI=y
+# CONFIG_OF_OVERLAY is not set
+# CONFIG_BLK_DEV_NVME is not set
+# CONFIG_PCI_ENDPOINT_TEST is not set
+CONFIG_RAID_ATTRS=m
+# CONFIG_SCSI_HISI_SAS_PCI is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT3SAS is not set
+# CONFIG_SCSI_UFS_QCOM is not set
+# CONFIG_SCSI_UFS_HISI is not set
+# CONFIG_SCSI_UFS_EXYNOS is not set
+# CONFIG_SATA_AHCI is not set
+CONFIG_AHCI_IMX=y
+# CONFIG_AHCI_BRCM is not set
+# CONFIG_AHCI_MVEBU is not set
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_RCAR is not set
+CONFIG_DM_CRYPT=m
+# CONFIG_B53 is not set
+# CONFIG_NET_DSA_BCM_SF2 is not set
+# CONFIG_NET_DSA_MSCC_FELIX is not set
+# CONFIG_NET_XGENE is not set
+# CONFIG_ATL1C is not set
+# CONFIG_SYSTEMPORT is not set
+# CONFIG_BNX2X is not set
+# CONFIG_THUNDER_NIC_PF is not set
+CONFIG_FSL_XGMAC_MDIO=y
+CONFIG_FSL_ENETC_IERB=y
+# CONFIG_FSL_FMAN is not set
+# CONFIG_FSL_DPAA_ETH is not set
+# CONFIG_FSL_DPAA2_ETH is not set
+# CONFIG_FSL_ENETC is not set
+# CONFIG_FSL_ENETC_VF is not set
+# CONFIG_FSL_ENETC_QOS is not set
+CONFIG_MVMDIO=y
+CONFIG_MSCC_OCELOT_SWITCH=m
+# CONFIG_HNS3 is not set
+# CONFIG_HNS3_HCLGE is not set
+# CONFIG_HNS3_ENET is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
+# CONFIG_MVNETA is not set
+# CONFIG_MVPP2 is not set
+# CONFIG_SKY2 is not set
+# CONFIG_MLX4_EN is not set
+# CONFIG_MLX5_CORE is not set
+# CONFIG_MLX5_CORE_EN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SH_ETH is not set
+# CONFIG_RAVB is not set
+CONFIG_STMMAC_ETH=y
+CONFIG_STMMAC_PLATFORM=y
+CONFIG_DWMAC_GENERIC=m
+CONFIG_DWMAC_IMX8=y
+# CONFIG_BROADCOM_PHY is not set
+CONFIG_MICROCHIP_PHY=y
+CONFIG_NXP_TJA11XX_PHY=y
+# CONFIG_SNI_AVE is not set
+# CONFIG_SNI_NETSEC is not set
+# CONFIG_TI_K3_AM65_CPSW_NUSS is not set
+# CONFIG_QCOM_IPA is not set
+# CONFIG_MESON_GXL_PHY is not set
+# CONFIG_AQUANTIA_PHY is not set
+# CONFIG_BCM54140_PHY is not set
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_MARVELL_10G_PHY is not set
+# CONFIG_MICREL_PHY is not set
+# CONFIG_MICROSEMI_PHY is not set
+# CONFIG_AT803X_PHY is not set
+CONFIG_MDIO_BITBANG=y
+# CONFIG_ROCKCHIP_PHY is not set
+# CONFIG_DP83867_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_USB_BRCMSTB is not set
+CONFIG_USB_RTL8152=y
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_AX8817X=y
+CONFIG_USB_NET_AX88179_178A=y
+CONFIG_USB_NET_CDC_NCM=y
+CONFIG_USB_NET_NET1080=y
+CONFIG_USB_NET_CDC_SUBSET=y
+CONFIG_USB_NET_ZAURUS=y
+CONFIG_BRCMFMAC=y
+CONFIG_HOSTAP=y
+CONFIG_RTL_CARDS=y
+# CONFIG_ATH10K is not set
+# CONFIG_ATH10K_PCI is not set
+# CONFIG_ATH10K_SNOC is not set
+# CONFIG_WCN36XX is not set
+# CONFIG_MWIFIEX is not set
+# CONFIG_MWIFIEX_SDIO is not set
+# CONFIG_MWIFIEX_PCIE is not set
+CONFIG_KEYBOARD_SNVS_PWRKEY=y
+# CONFIG_KEYBOARD_IMX_SC_KEY is not set
+# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set
+# CONFIG_INPUT_PM8941_PWRKEY is not set
+# CONFIG_INPUT_PM8XXX_VIBRATOR is not set
+# CONFIG_INPUT_PWM_BEEPER is not set
+# CONFIG_INPUT_PWM_VIBRA is not set
+# CONFIG_INPUT_HISI_POWERKEY is not set
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_8250_BCM2835AUX is not set
+# CONFIG_SERIAL_8250_OMAP is not set
+# CONFIG_SERIAL_8250_MT6577 is not set
+# CONFIG_SERIAL_8250_UNIPHIER is not set
+# CONFIG_SERIAL_MESON is not set
+# CONFIG_SERIAL_MESON_CONSOLE is not set
+# CONFIG_SERIAL_SAMSUNG is not set
+# CONFIG_SERIAL_SAMSUNG_CONSOLE is not set
+# CONFIG_SERIAL_TEGRA is not set
+# CONFIG_SERIAL_TEGRA_TCU is not set
+# CONFIG_SERIAL_SH_SCI is not set
+# CONFIG_SERIAL_MSM is not set
+# CONFIG_SERIAL_MSM_CONSOLE is not set
+# CONFIG_SERIAL_QCOM_GENI is not set
+# CONFIG_SERIAL_QCOM_GENI_CONSOLE is not set
+# CONFIG_SERIAL_MVEBU_UART is not set
+# CONFIG_SERIAL_OWL is not set
+# CONFIG_I2C_MUX is not set
+# CONFIG_I2C_BCM2835 is not set
+# CONFIG_I2C_MESON is not set
+# CONFIG_I2C_MT65XX is not set
+# CONFIG_I2C_MV64XXX is not set
+# CONFIG_I2C_OMAP is not set
+# CONFIG_I2C_OWL is not set
+# CONFIG_I2C_PXA is not set
+# CONFIG_I2C_QCOM_CCI is not set
+# CONFIG_I2C_QCOM_GENI is not set
+# CONFIG_I2C_QUP is not set
+# CONFIG_I2C_RIIC is not set
+# CONFIG_I2C_S3C2410 is not set
+# CONFIG_I2C_SH_MOBILE is not set
+# CONFIG_I2C_TEGRA is not set
+# CONFIG_I2C_UNIPHIER_F is not set
+# CONFIG_I2C_RCAR is not set
+# CONFIG_SPI_ARMADA_3700 is not set
+# CONFIG_SPI_BCM2835 is not set
+# CONFIG_SPI_BCM2835AUX is not set
+# CONFIG_SPI_DESIGNWARE is not set
+# CONFIG_SPI_DW_DMA is not set
+# CONFIG_SPI_DW_MMIO is not set
+CONFIG_SPI_IMX=y
+# CONFIG_SPI_FSL_DSPI is not set
+# CONFIG_SPI_MESON_SPICC is not set
+# CONFIG_SPI_MESON_SPIFC is not set
+# CONFIG_SPI_ORION is not set
+CONFIG_SPI_SPIDEV=y
+CONFIG_SPI_SLAVE=y
+CONFIG_SPI_SLAVE_TIME=y
+CONFIG_SPI_SLAVE_SYSTEM_CONTROL=y
+CONFIG_PINCTRL=y
+# CONFIG_SPI_RPCIF is not set
+# CONFIG_SPI_RSPI is not set
+# CONFIG_SPI_QCOM_QSPI is not set
+# CONFIG_SPI_QUP is not set
+# CONFIG_SPI_QCOM_GENI is not set
+# CONFIG_SPI_S3C64XX is not set
+# CONFIG_SPI_SH_MSIOF is not set
+# CONFIG_SPI_SUN6I is not set
+# CONFIG_SPMI is not set
+# CONFIG_PINCTRL_OWL is not set
+# CONFIG_PINCTRL_S700 is not set
+# CONFIG_PINCTRL_S900 is not set
+CONFIG_GPIOLIB=y
+# CONFIG_PINCTRL_MSM is not set
+# CONFIG_PINCTRL_IPQ8074 is not set
+# CONFIG_PINCTRL_IPQ6018 is not set
+# CONFIG_PINCTRL_MSM8916 is not set
+# CONFIG_PINCTRL_MSM8994 is not set
+# CONFIG_PINCTRL_MSM8996 is not set
+# CONFIG_PINCTRL_MSM8998 is not set
+# CONFIG_PINCTRL_QCS404 is not set
+# CONFIG_PINCTRL_QDF2XXX is not set
+# CONFIG_PINCTRL_QCOM_SPMI_PMIC is not set
+# CONFIG_PINCTRL_SC7180 is not set
+# CONFIG_PINCTRL_SC7280 is not set
+# CONFIG_PINCTRL_SDM845 is not set
+# CONFIG_PINCTRL_SM8150 is not set
+# CONFIG_PINCTRL_SM8250 is not set
+# CONFIG_PINCTRL_SM8350 is not set
+# CONFIG_PINCTRL_SM8450 is not set
+# CONFIG_PINCTRL_LPASS_LPI is not set
+# CONFIG_GPIO_DAVINCI is not set
+# CONFIG_GPIO_MAX77620 is not set
+# CONFIG_GPIO_MPC8XXX is not set
+# CONFIG_GPIO_RCAR is not set
+# CONFIG_GPIO_UNIPHIER is not set
+# CONFIG_GPIO_VISCONTI is not set
+# CONFIG_GPIO_XGENE_SB is not set
+# CONFIG_GPIO_SL28CPLD is not set
+CONFIG_POWER_RESET_BRCMSTB=y
+# CONFIG_POWER_RESET_MSM is not set
+# CONFIG_POWER_RESET_QCOM_PON is not set
+# CONFIG_BATTERY_MAX17042 is not set
+# CONFIG_CHARGER_BQ25890 is not set
+# CONFIG_CHARGER_BQ25980 is not set
+# CONFIG_SENSORS_JC42 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_RASPBERRYPI_HWMON is not set
+# CONFIG_SENSORS_SL28CPLD is not set
+CONFIG_THERMAL_WRITABLE_TRIPS=y
+CONFIG_IMX_SC_THERMAL=y
+CONFIG_IMX8MM_THERMAL=y
+CONFIG_QORIQ_THERMAL=y
+# CONFIG_SUN8I_THERMAL is not set
+# CONFIG_ROCKCHIP_THERMAL is not set
+# CONFIG_RCAR_THERMAL is not set
+# CONFIG_RCAR_GEN3_THERMAL is not set
+# CONFIG_RZG2L_THERMAL is not set
+# CONFIG_ARMADA_THERMAL is not set
+# CONFIG_BCM2711_THERMAL is not set
+# CONFIG_BCM2835_THERMAL is not set
+# CONFIG_BRCMSTB_THERMAL is not set
+# CONFIG_EXYNOS_THERMAL is not set
+# CONFIG_TEGRA_SOCTHERM is not set
+# CONFIG_TEGRA_BPMP_THERMAL is not set
+# CONFIG_QCOM_TSENS is not set
+# CONFIG_QCOM_SPMI_TEMP_ALARM is not set
+# CONFIG_QCOM_LMH is not set
+# CONFIG_UNIPHIER_THERMAL is not set
+# CONFIG_SL28CPLD_WATCHDOG is not set
+# CONFIG_S3C2410_WATCHDOG is not set
+# CONFIG_BCM7038_WDT is not set
+# CONFIG_SUNXI_WATCHDOG is not set
+CONFIG_IMX_SC_WDT=y
+CONFIG_IMX7ULP_WDT=y
+# CONFIG_QCOM_WDT is not set
+# CONFIG_MESON_GXBB_WATCHDOG is not set
+# CONFIG_MESON_WATCHDOG is not set
+# CONFIG_RENESAS_WDT is not set
+# CONFIG_RENESAS_RZG2LWDT is not set
+# CONFIG_UNIPHIER_WATCHDOG is not set
+# CONFIG_BCM2835_WDT is not set
+# CONFIG_MFD_ALTERA_SYSMGR is not set
+# CONFIG_MFD_AXP20X_RSB is not set
+# CONFIG_MFD_EXYNOS_LPASS is not set
+# CONFIG_MFD_HI655X_PMIC is not set
+# CONFIG_MFD_MT6397 is not set
+# CONFIG_MFD_SIMPLE_MFD_I2C is not set
+# CONFIG_MFD_SPMI_PMIC is not set
+# CONFIG_MFD_SL28CPLD is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_HI655X is not set
+# CONFIG_REGULATOR_MP8859 is not set
+# CONFIG_REGULATOR_MT6358 is not set
+# CONFIG_REGULATOR_MT6397 is not set
+# CONFIG_REGULATOR_PF8X00 is not set
+# CONFIG_REGULATOR_QCOM_RPMH is not set
+# CONFIG_REGULATOR_QCOM_SMD_RPM is not set
+# CONFIG_REGULATOR_QCOM_SPMI is not set
+# CONFIG_REGULATOR_TPS65132 is not set
+CONFIG_MEDIA_SUPPORT=y
+# CONFIG_RC_CORE is not set
+# CONFIG_RC_DECODERS is not set
+# CONFIG_RC_DEVICES is not set
+# CONFIG_IR_MESON is not set
+# CONFIG_IR_SUNXI is not set
+CONFIG_SDR_PLATFORM_DRIVERS=y
+# CONFIG_VIDEO_QCOM_CAMSS is not set
+# CONFIG_VIDEO_RCAR_CSI2 is not set
+# CONFIG_VIDEO_RCAR_VIN is not set
+# CONFIG_VIDEO_SUN6I_CSI is not set
+# CONFIG_VIDEO_RCAR_ISP is not set
+# CONFIG_VIDEO_SAMSUNG_S5P_JPEG is not set
+# CONFIG_VIDEO_SAMSUNG_S5P_MFC is not set
+# CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC is not set
+# CONFIG_VIDEO_RENESAS_FDP1 is not set
+# CONFIG_VIDEO_RENESAS_FCP is not set
+# CONFIG_VIDEO_RENESAS_VSP1 is not set
+# CONFIG_VIDEO_QCOM_VENUS is not set
+# CONFIG_VIDEO_RCAR_DRIF is not set
+CONFIG_VIDEO_OV5640=y
+CONFIG_DRM=y
+CONFIG_DRM_I2C_CH7006=m
+CONFIG_DRM_I2C_SIL164=m
+# CONFIG_DRM_NOUVEAU is not set
+# CONFIG_DRM_EXYNOS is not set
+# CONFIG_DRM_EXYNOS5433_DECON is not set
+# CONFIG_DRM_EXYNOS7_DECON is not set
+# CONFIG_DRM_EXYNOS_DSI is not set
+# CONFIG_DRM_EXYNOS_DP is not set
+# CONFIG_DRM_EXYNOS_HDMI is not set
+# CONFIG_DRM_EXYNOS_MIC is not set
+# CONFIG_DRM_ROCKCHIP is not set
+# CONFIG_ROCKCHIP_ANALOGIX_DP is not set
+# CONFIG_ROCKCHIP_CDN_DP is not set
+# CONFIG_ROCKCHIP_DW_HDMI is not set
+# CONFIG_ROCKCHIP_DW_MIPI_DSI is not set
+# CONFIG_ROCKCHIP_INNO_HDMI is not set
+# CONFIG_ROCKCHIP_LVDS is not set
+# CONFIG_DRM_RCAR_DU is not set
+# CONFIG_DRM_RCAR_USE_LVDS is not set
+# CONFIG_DRM_RCAR_MIPI_DSI is not set
+# CONFIG_DRM_SUN4I is not set
+# CONFIG_DRM_SUN6I_DSI is not set
+# CONFIG_DRM_SUN8I_DW_HDMI is not set
+# CONFIG_DRM_SUN8I_MIXER is not set
+# CONFIG_DRM_MSM is not set
+# CONFIG_DRM_TEGRA is not set
+# CONFIG_DRM_PANEL_BOE_TV101WUM_NL6 is not set
+# CONFIG_DRM_PANEL_LVDS is not set
+# CONFIG_DRM_PANEL_SIMPLE is not set
+# CONFIG_DRM_PANEL_EDP is not set
+# CONFIG_DRM_PANEL_MANTIX_MLAF057WE51 is not set
+# CONFIG_DRM_PANEL_RAYDIUM_RM67191 is not set
+# CONFIG_DRM_PANEL_SITRONIX_ST7703 is not set
+CONFIG_DRM_DISPLAY_CONNECTOR=m
+# CONFIG_DRM_LONTIUM_LT8912B is not set
+CONFIG_DRM_NWL_MIPI_DSI=y
+# CONFIG_DRM_LONTIUM_LT9611UXC is not set
+# CONFIG_DRM_PARADE_PS8640 is not set
+CONFIG_DRM_I2C_ADV7511=y
+CONFIG_DRM_DW_HDMI_I2S_AUDIO=m
+CONFIG_DRM_IMX_DCSS=y
+# CONFIG_DRM_VC4 is not set
+# CONFIG_DRM_HISI_HIBMC is not set
+CONFIG_DRM_MXSFB=y
+# CONFIG_DRM_MEDIATEK is not set
+# CONFIG_DRM_MEDIATEK_HDMI is not set
+# CONFIG_DRM_MESON is not set
+CONFIG_DRM_LEGACY=y
+# CONFIG_FB is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_EFI is not set
+# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
+# CONFIG_BACKLIGHT_PWM is not set
+# CONFIG_BACKLIGHT_LP855X is not set
+# CONFIG_LOGO is not set
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_USB is not set
+CONFIG_SND_DYNAMIC_MINORS=y
+CONFIG_SND_ALOOP=m
+# CONFIG_SND_HDA_TEGRA is not set
+# CONFIG_SND_HDA_CODEC_HDMI is not set
+CONFIG_SND_SOC_FSL_ASRC=y
+# CONFIG_SND_SOC_FSL_AUDMIX is not set
+# CONFIG_SND_SOC_FSL_SPDIF is not set
+CONFIG_SND_SOC_FSL_EASRC=y
+CONFIG_SND_IMX_SOC=y
+CONFIG_SND_SOC_FSL_ASOC_CARD=y
+CONFIG_SND_SOC_SOF_TOPLEVEL=y
+CONFIG_SND_SOC_SOF_OF=m
+CONFIG_SND_SOC_SOF_IMX_TOPLEVEL=y
+CONFIG_SND_SOC_AK4458=y
+CONFIG_SND_SOC_AK5558=y
+CONFIG_SND_SOC_PCM512x_I2C=y
+CONFIG_SND_SIMPLE_CARD=y
+CONFIG_SND_AUDIO_GRAPH_CARD=y
+CONFIG_USB_CONN_GPIO=y
+# CONFIG_SND_BCM2835_SOC_I2S is not set
+# CONFIG_SND_SOC_CROS_EC_CODEC is not set
+# CONFIG_SND_SOC_DMIC is not set
+# CONFIG_SND_SOC_FSL_MICFIL is not set
+# CONFIG_SND_SOC_IMX_SGTL5000 is not set
+# CONFIG_SND_SOC_IMX_SPDIF is not set
+# CONFIG_SND_SOC_IMX_AUDMIX is not set
+# CONFIG_SND_MESON_AXG_SOUND_CARD is not set
+# CONFIG_SND_MESON_GX_SOUND_CARD is not set
+# CONFIG_SND_SOC_QCOM is not set
+# CONFIG_SND_SOC_APQ8016_SBC is not set
+# CONFIG_SND_SOC_MSM8996 is not set
+# CONFIG_SND_SOC_MAX98357A is not set
+# CONFIG_SND_SOC_MAX98927 is not set
+# CONFIG_SND_SOC_SDM845 is not set
+# CONFIG_SND_SOC_SM8250 is not set
+# CONFIG_SND_SOC_ROCKCHIP is not set
+# CONFIG_SND_SOC_ROCKCHIP_SPDIF is not set
+# CONFIG_SND_SOC_ROCKCHIP_RT5645 is not set
+# CONFIG_SND_SOC_RK3399_GRU_SOUND is not set
+# CONFIG_SND_SOC_SAMSUNG is not set
+# CONFIG_SND_SOC_RCAR is not set
+# CONFIG_SND_SOC_RZ is not set
+# CONFIG_SND_SOC_SGTL5000 is not set
+# CONFIG_SND_SOC_SPDIF is not set
+# CONFIG_SND_SUN4I_I2S is not set
+# CONFIG_SND_SUN4I_SPDIF is not set
+# CONFIG_SND_SOC_TEGRA is not set
+# CONFIG_SND_SOC_TEGRA210_AHUB is not set
+# CONFIG_SND_SOC_TEGRA210_DMIC is not set
+# CONFIG_SND_SOC_TEGRA210_I2S is not set
+# CONFIG_SND_SOC_TEGRA186_DSPK is not set
+# CONFIG_SND_SOC_TEGRA210_ADMAIF is not set
+# CONFIG_SND_SOC_TEGRA210_MVC is not set
+# CONFIG_SND_SOC_TEGRA210_SFC is not set
+# CONFIG_SND_SOC_TEGRA210_AMX is not set
+# CONFIG_SND_SOC_TEGRA210_ADX is not set
+# CONFIG_SND_SOC_TEGRA210_MIXER is not set
+# CONFIG_SND_SOC_TEGRA_AUDIO_GRAPH_CARD is not set
+# CONFIG_SND_SOC_AK4613 is not set
+# CONFIG_SND_SOC_ES7134 is not set
+# CONFIG_SND_SOC_ES7241 is not set
+# CONFIG_SND_SOC_GTM601 is not set
+# CONFIG_SND_SOC_MSM8916_WCD_ANALOG is not set
+# CONFIG_SND_SOC_MSM8916_WCD_DIGITAL is not set
+# CONFIG_SND_SOC_PCM3168A_I2C is not set
+# CONFIG_SND_SOC_RT5659 is not set
+# CONFIG_SND_SOC_SIMPLE_AMPLIFIER is not set
+# CONFIG_SND_SOC_SIMPLE_MUX is not set
+# CONFIG_SND_SOC_TAS571X is not set
+# CONFIG_SND_SOC_TLV320AIC32X4_I2C is not set
+# CONFIG_SND_SOC_WCD934X is not set
+# CONFIG_SND_SOC_WM8904 is not set
+# CONFIG_SND_SOC_WM8960 is not set
+# CONFIG_SND_SOC_WM8962 is not set
+# CONFIG_SND_SOC_WM8978 is not set
+# CONFIG_SND_SOC_WSA881X is not set
+# CONFIG_SND_SOC_NAU8822 is not set
+# CONFIG_SND_SOC_LPASS_WSA_MACRO is not set
+# CONFIG_SND_SOC_LPASS_VA_MACRO is not set
+# CONFIG_SND_AUDIO_GRAPH_CARD2 is not set
+# CONFIG_HID_MULTITOUCH is not set
+# CONFIG_I2C_HID_ACPI is not set
+# CONFIG_I2C_HID_OF is not set
+# CONFIG_USB_XHCI_PCI_RENESAS is not set
+# CONFIG_USB_XHCI_TEGRA is not set
+# CONFIG_USB_EHCI_EXYNOS is not set
+# CONFIG_USB_OHCI_EXYNOS is not set
+CONFIG_USB_HCD_TEST_MODE=y
+# CONFIG_USB_RENESAS_USBHS_HCD is not set
+# CONFIG_USB_RENESAS_USBHS is not set
+CONFIG_USB_UAS=y
+# CONFIG_USB_CDNS_SUPPORT is not set
+# CONFIG_USB_CDNS3 is not set
+# CONFIG_USB_CDNS3_GADGET is not set
+# CONFIG_USB_CDNS3_HOST is not set
+# CONFIG_USB_MTU3 is not set
+# CONFIG_USB_MUSB_SUNXI is not set
+CONFIG_USB_SERIAL=y
+CONFIG_USB_SERIAL_CONSOLE=y
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_SIMPLE=y
+CONFIG_USB_SERIAL_FTDI_SIO=y
+CONFIG_USB_TEST=m
+CONFIG_USB_EHSET_TEST_FIXTURE=y
+# CONFIG_USB_SERIAL_CP210X is not set
+# CONFIG_USB_SERIAL_OPTION is not set
+CONFIG_USB_MXS_PHY=y
+# CONFIG_REALTEK_PHY is not set
+CONFIG_USB_ULPI=y
+CONFIG_USB_SNP_UDC_PLAT=y
+CONFIG_USB_BDC_UDC=y
+CONFIG_USB_CONFIGFS=y
+# CONFIG_USB_RENESAS_USBHS_UDC is not set
+# CONFIG_USB_RENESAS_USB3 is not set
+# CONFIG_USB_TEGRA_XUDC is not set
+CONFIG_USB_CONFIGFS_F_LB_SS=y
+CONFIG_USB_CONFIGFS_F_UAC1=y
+CONFIG_USB_CONFIGFS_F_UAC1_LEGACY=y
+CONFIG_USB_CONFIGFS_F_UAC2=y
+CONFIG_USB_CONFIGFS_F_MIDI=y
+CONFIG_USB_CONFIGFS_F_HID=y
+CONFIG_USB_CONFIGFS_F_UVC=y
+CONFIG_USB_ZERO=m
+CONFIG_USB_AUDIO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_MASS_STORAGE=m
+CONFIG_USB_G_SERIAL=m
+CONFIG_TYPEC=y
+CONFIG_TYPEC_TCPM=y
+CONFIG_TYPEC_TCPCI=y
+# CONFIG_TYPEC_TPS6598X is not set
+# CONFIG_MMC_SDHCI_ACPI is not set
+# CONFIG_MMC_SDHCI_TEGRA is not set
+# CONFIG_MMC_MESON_GX is not set
+# CONFIG_MMC_SDHCI_MSM is not set
+# CONFIG_MMC_SDHI is not set
+# CONFIG_MMC_UNIPHIER is not set
+# CONFIG_MMC_DW_ROCKCHIP is not set
+# CONFIG_MMC_SUNXI is not set
+# CONFIG_MMC_BCM2835 is not set
+# CONFIG_MMC_MTK is not set
+# CONFIG_MMC_OWL is not set
+# CONFIG_LEDS_LM3692X is not set
+# CONFIG_LEDS_PCA9532 is not set
+# CONFIG_EDAC_LAYERSCAPE is not set
+# CONFIG_RTC_DRV_HYM8563 is not set
+# CONFIG_RTC_DRV_PCF85063 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_RV3028 is not set
+# CONFIG_RTC_DRV_FSL_FTM_ALARM is not set
+# CONFIG_RTC_DRV_S3C is not set
+CONFIG_RTC_DRV_SNVS=y
+CONFIG_RTC_DRV_IMX_SC=y
+# CONFIG_RTC_DRV_SUN6I is not set
+# CONFIG_RTC_DRV_ARMADA38X is not set
+# CONFIG_RTC_DRV_PM8XXX is not set
+# CONFIG_RTC_DRV_TEGRA is not set
+# CONFIG_RTC_DRV_XGENE is not set
+# CONFIG_RTC_DRV_MT6397 is not set
+CONFIG_BCM_SBA_RAID=m
+# CONFIG_DMA_BCM2835 is not set
+# CONFIG_DMA_SUN6I is not set
+CONFIG_FSL_QDMA=m
+CONFIG_IMX_SDMA=y
+# CONFIG_K3_DMA is not set
+# CONFIG_MV_XOR is not set
+CONFIG_MXS_DMA=y
+# CONFIG_OWL_DMA is not set
+# CONFIG_TEGRA186_GPC_DMA is not set
+# CONFIG_TEGRA20_APB_DMA is not set
+# CONFIG_TEGRA210_ADMA is not set
+# CONFIG_QCOM_BAM_DMA is not set
+CONFIG_DMATEST=y
+CONFIG_DMABUF_HEAPS=y
+CONFIG_DMABUF_HEAPS_SYSTEM=y
+CONFIG_DMABUF_HEAPS_CMA=y
+# CONFIG_RCAR_DMAC is not set
+# CONFIG_RENESAS_USB_DMAC is not set
+# CONFIG_RZ_DMAC is not set
+# CONFIG_TI_K3_UDMA is not set
+# CONFIG_TI_K3_UDMA_GLUE_LAYER is not set
+# CONFIG_VFIO_PCI is not set
+# CONFIG_VIRTIO_PCI is not set
+# CONFIG_XEN_GNTDEV is not set
+# CONFIG_XEN_GRANT_DEV_ALLOC is not set
+# CONFIG_VIDEO_HANTRO is not set
+# CONFIG_VIDEO_IMX_MEDIA is not set
+CONFIG_CROS_EC_TYPEC=y
+# CONFIG_CLK_VEXPRESS_OSC is not set
+# CONFIG_COMMON_CLK_SCMI is not set
+# CONFIG_COMMON_CLK_FSL_SAI is not set
+CONFIG_COMMON_CLK_XGENE=y
+# CONFIG_COMMON_CLK_BD718XX is not set
+# CONFIG_CLK_RASPBERRYPI is not set
+# CONFIG_CLK_IMX8MM is not set
+# CONFIG_CLK_IMX8MP is not set
+# CONFIG_CLK_IMX8MQ is not set
+# CONFIG_CLK_IMX8QXP is not set
+# CONFIG_CLK_IMX8ULP is not set
+# CONFIG_TI_SCI_CLK is not set
+# CONFIG_COMMON_CLK_QCOM is not set
+# CONFIG_QCOM_A53PLL is not set
+# CONFIG_QCOM_CLK_APCS_MSM8916 is not set
+# CONFIG_QCOM_CLK_APCC_MSM8996 is not set
+# CONFIG_QCOM_CLK_SMD_RPM is not set
+# CONFIG_QCOM_CLK_RPMH is not set
+# CONFIG_IPQ_GCC_6018 is not set
+# CONFIG_IPQ_GCC_8074 is not set
+# CONFIG_MSM_GCC_8916 is not set
+# CONFIG_MSM_GCC_8994 is not set
+# CONFIG_MSM_MMCC_8996 is not set
+# CONFIG_MSM_GCC_8998 is not set
+# CONFIG_QCS_GCC_404 is not set
+# CONFIG_SC_GCC_7180 is not set
+# CONFIG_SC_GCC_7280 is not set
+# CONFIG_SDM_CAMCC_845 is not set
+# CONFIG_SDM_GPUCC_845 is not set
+# CONFIG_SDM_VIDEOCC_845 is not set
+# CONFIG_SDM_DISPCC_845 is not set
+# CONFIG_SM_GCC_8350 is not set
+# CONFIG_SM_GCC_8450 is not set
+# CONFIG_SM_GPUCC_8150 is not set
+# CONFIG_SM_GPUCC_8250 is not set
+# CONFIG_QCOM_HFPLL is not set
+# CONFIG_CLK_GFM_LPASS_SM8250 is not set
+# CONFIG_CLK_RCAR_USB2_CLOCK_SEL is not set
+# CONFIG_HWSPINLOCK_QCOM is not set
+# CONFIG_RENESAS_OSTM is not set
+# CONFIG_BCM2835_MBOX is not set
+# CONFIG_QCOM_APCS_IPC is not set
+# CONFIG_QCOM_IPCC is not set
+# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set
+# CONFIG_ROCKCHIP_IOMMU is not set
+# CONFIG_TEGRA_IOMMU_SMMU is not set
+# CONFIG_MTK_IOMMU is not set
+# CONFIG_QCOM_IOMMU is not set
+CONFIG_IMX_REMOTEPROC=y
+CONFIG_IMX_DSP_REMOTEPROC=y
+CONFIG_RPMSG_CHAR=y
+# CONFIG_QCOM_Q6V5_MSS is not set
+# CONFIG_QCOM_Q6V5_PAS is not set
+# CONFIG_QCOM_SYSMON is not set
+# CONFIG_QCOM_WCNSS_PIL is not set
+# CONFIG_RPMSG_QCOM_GLINK_SMEM is not set
+# CONFIG_RPMSG_QCOM_SMD is not set
+CONFIG_SOC_BRCMSTB=y
+# CONFIG_OWL_PM_DOMAINS is not set
+# CONFIG_RASPBERRYPI_POWER is not set
+# CONFIG_FSL_DPAA is not set
+# CONFIG_FSL_MC_DPIO is not set
+CONFIG_SOC_TI=y
+# CONFIG_DEVFREQ_GOV_USERSPACE is not set
+# CONFIG_MTK_DEVAPC is not set
+# CONFIG_MTK_PMIC_WRAP is not set
+# CONFIG_QCOM_AOSS_QMP is not set
+# CONFIG_QCOM_COMMAND_DB is not set
+# CONFIG_QCOM_CPR is not set
+# CONFIG_QCOM_GENI_SE is not set
+# CONFIG_QCOM_RMTFS_MEM is not set
+# CONFIG_QCOM_RPMH is not set
+# CONFIG_QCOM_RPMHPD is not set
+# CONFIG_QCOM_RPMPD is not set
+# CONFIG_QCOM_SMEM is not set
+# CONFIG_QCOM_SMD_RPM is not set
+# CONFIG_QCOM_SMP2P is not set
+# CONFIG_QCOM_SMSM is not set
+# CONFIG_QCOM_SOCINFO is not set
+# CONFIG_QCOM_STATS is not set
+# CONFIG_QCOM_WCNSS_CTRL is not set
+# CONFIG_QCOM_APR is not set
+# CONFIG_ARCH_R8A77995 is not set
+# CONFIG_ARCH_R8A77990 is not set
+# CONFIG_ARCH_R8A77950 is not set
+# CONFIG_ARCH_R8A77951 is not set
+# CONFIG_ARCH_R8A77965 is not set
+# CONFIG_ARCH_R8A77960 is not set
+# CONFIG_ARCH_R8A77961 is not set
+# CONFIG_ARCH_R8A779F0 is not set
+# CONFIG_ARCH_R8A77980 is not set
+# CONFIG_ARCH_R8A77970 is not set
+# CONFIG_ARCH_R8A779A0 is not set
+# CONFIG_ARCH_R8A774C0 is not set
+# CONFIG_ARCH_R8A774E1 is not set
+# CONFIG_ARCH_R8A774A1 is not set
+# CONFIG_ARCH_R8A774B1 is not set
+# CONFIG_ARCH_R9A07G044 is not set
+# CONFIG_ROCKCHIP_IODOMAIN is not set
+# CONFIG_ROCKCHIP_PM_DOMAINS is not set
+# CONFIG_ARCH_TEGRA_132_SOC is not set
+# CONFIG_ARCH_TEGRA_210_SOC is not set
+# CONFIG_ARCH_TEGRA_186_SOC is not set
+# CONFIG_ARCH_TEGRA_194_SOC is not set
+# CONFIG_ARCH_TEGRA_234_SOC is not set
+# CONFIG_TI_SCI_PM_DOMAINS is not set
+# CONFIG_ARM_IMX_BUS_DEVFREQ is not set
+# CONFIG_ARM_IMX8M_DDRC_DEVFREQ is not set
+CONFIG_MEMORY=y
+# CONFIG_RENESAS_RPCIF is not set
+CONFIG_IMX8QXP_ADC=y
+# CONFIG_EXYNOS_ADC is not set
+# CONFIG_QCOM_SPMI_VADC is not set
+# CONFIG_QCOM_SPMI_ADC5 is not set
+# CONFIG_ROCKCHIP_SARADC is not set
+# CONFIG_RZG2L_ADC is not set
+# CONFIG_TI_ADS1015 is not set
+CONFIG_IIO_ST_LSM6DSX=y
+# CONFIG_SENSORS_ISL29018 is not set
+# CONFIG_VCNL4000 is not set
+# CONFIG_IIO_ST_MAGN_3AXIS is not set
+# CONFIG_MPL3115 is not set
+# CONFIG_PWM_BCM2835 is not set
+# CONFIG_PWM_BRCMSTB is not set
+CONFIG_PWM_FSL_FTM=m
+CONFIG_PWM_IMX27=y
+# CONFIG_PWM_MESON is not set
+# CONFIG_PWM_MTK_DISP is not set
+# CONFIG_PWM_MEDIATEK is not set
+# CONFIG_PWM_RCAR is not set
+# CONFIG_PWM_RENESAS_TPU is not set
+# CONFIG_PWM_ROCKCHIP is not set
+# CONFIG_PWM_SAMSUNG is not set
+# CONFIG_PWM_SL28CPLD is not set
+# CONFIG_PWM_SUN4I is not set
+# CONFIG_PWM_TEGRA is not set
+# CONFIG_PWM_VISCONTI is not set
+# CONFIG_SL28CPLD_INTC is not set
+# CONFIG_QCOM_PDC is not set
+# CONFIG_RESET_QCOM_AOSS is not set
+# CONFIG_RESET_QCOM_PDC is not set
+# CONFIG_RESET_RZG2L_USBPHY_CTRL is not set
+# CONFIG_RESET_TI_SCI is not set
+CONFIG_PHY_CADENCE_SALVO=y
+CONFIG_PHY_MIXEL_MIPI_DPHY=y
+# CONFIG_PHY_SUN4I_USB is not set
+# CONFIG_PHY_CADENCE_SIERRA is not set
+# CONFIG_PHY_FSL_IMX8M_PCIE is not set
+# CONFIG_PHY_HI6220_USB is not set
+# CONFIG_PHY_HISTB_COMBPHY is not set
+# CONFIG_PHY_HISI_INNO_USB2 is not set
+# CONFIG_PHY_MVEBU_CP110_COMPHY is not set
+# CONFIG_PHY_MTK_TPHY is not set
+# CONFIG_PHY_QCOM_QMP is not set
+# CONFIG_PHY_QCOM_QUSB2 is not set
+CONFIG_PHY_SAMSUNG_USB2=y
+# CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2 is not set
+# CONFIG_PHY_RCAR_GEN3_PCIE is not set
+# CONFIG_PHY_RCAR_GEN3_USB2 is not set
+# CONFIG_PHY_RCAR_GEN3_USB3 is not set
+# CONFIG_PHY_ROCKCHIP_EMMC is not set
+# CONFIG_PHY_ROCKCHIP_INNO_HDMI is not set
+# CONFIG_PHY_ROCKCHIP_INNO_USB2 is not set
+# CONFIG_PHY_ROCKCHIP_INNO_DSIDPHY is not set
+# CONFIG_PHY_ROCKCHIP_PCIE is not set
+# CONFIG_PHY_ROCKCHIP_TYPEC is not set
+# CONFIG_PHY_SAMSUNG_UFS is not set
+# CONFIG_PHY_UNIPHIER_USB2 is not set
+# CONFIG_PHY_UNIPHIER_USB3 is not set
+# CONFIG_PHY_TEGRA_XUSB is not set
+# CONFIG_PHY_AM654_SERDES is not set
+# CONFIG_PHY_J721E_WIZ is not set
+CONFIG_FSL_IMX8_DDR_PMU=y
+# CONFIG_QCOM_L2_PMU is not set
+# CONFIG_QCOM_L3_PMU is not set
+# CONFIG_MTK_EFUSE is not set
+# CONFIG_QCOM_QFPROM is not set
+# CONFIG_ROCKCHIP_EFUSE is not set
+# CONFIG_NVMEM_SUNXI_SID is not set
+# CONFIG_UNIPHIER_EFUSE is not set
+# CONFIG_MESON_EFUSE is not set
+# CONFIG_NVMEM_RMEM is not set
+# CONFIG_NVMEM_LAYERSCAPE_SFP is not set
+# CONFIG_FPGA_MGR_ALTERA_CVP is not set
+# CONFIG_FPGA_MGR_STRATIX10_SOC is not set
+# CONFIG_SLIM_QCOM_NGD_CTRL is not set
+# CONFIG_INTERCONNECT_IMX is not set
+# CONFIG_INTERCONNECT_IMX8MM is not set
+# CONFIG_INTERCONNECT_IMX8MN is not set
+# CONFIG_INTERCONNECT_IMX8MQ is not set
+# CONFIG_INTERCONNECT_QCOM is not set
+# CONFIG_INTERCONNECT_QCOM_MSM8916 is not set
+# CONFIG_INTERCONNECT_QCOM_OSM_L3 is not set
+# CONFIG_INTERCONNECT_QCOM_SC7280 is not set
+# CONFIG_INTERCONNECT_QCOM_SDM845 is not set
+# CONFIG_INTERCONNECT_QCOM_SM8150 is not set
+# CONFIG_INTERCONNECT_QCOM_SM8250 is not set
+# CONFIG_INTERCONNECT_QCOM_SM8350 is not set
+# CONFIG_INTERCONNECT_QCOM_SM8450 is not set
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_TMPFS_XATTR is not set
+CONFIG_JFFS2_FS=y
+CONFIG_UBIFS_FS=y
+CONFIG_SQUASHFS_XZ=y
+CONFIG_CRYPTO_USER=y
+CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_DH=m
+# CONFIG_CRYPTO_CURVE25519 is not set
+CONFIG_CRYPTO_CHACHA20POLY1305=m
+CONFIG_CRYPTO_CFB=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_OFB=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_VMAC=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_STREEBOG=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_USER_API_HASH=m
+CONFIG_CRYPTO_USER_API_SKCIPHER=m
+CONFIG_CRYPTO_USER_API_AEAD=m
+# CONFIG_CRYPTO_DEV_SUN8I_CE is not set
+# CONFIG_CRYPTO_DEV_FSL_DPAA2_CAAM is not set
+# CONFIG_CRYPTO_DEV_QCOM_RNG is not set
+CONFIG_CRYPTO_DEV_AMLOGIC_GXL=m
+CONFIG_INDIRECT_PIO=y
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC8 is not set
+# CONFIG_CRYPTO_DEV_HISI_SEC2 is not set
+# CONFIG_CRYPTO_DEV_HISI_ZIP is not set
+# CONFIG_CRYPTO_DEV_HISI_HPRE is not set
+# CONFIG_CRYPTO_DEV_HISI_TRNG is not set
+CONFIG_IRQ_POLL=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_INFO_REDUCED is not set
+CONFIG_CORESIGHT=y
+CONFIG_CORESIGHT_LINK_AND_SINK_TMC=y
+CONFIG_CORESIGHT_SOURCE_ETM4X=y
diff --git a/board/bsh/imx8mn-bsh-smm-s2/nand-full.lst b/board/bsh/imx8mn-bsh-smm-s2/nand-full.lst
new file mode 100644
index 000000000000..c01d2d6c1dac
--- /dev/null
+++ b/board/bsh/imx8mn-bsh-smm-s2/nand-full.lst
@@ -0,0 +1,29 @@
+# @_flash.bin | bootloader
+# @_image [_flash.bin] | image burn to nand, default is the same as bootloader
+# @_filesystem | filesystem to burn
+# @_kernel | kernel image
+# @_dtb | dtb image
+
+# This command will be run when ROM support stream mode
+# i.MX8QXP, i.MX8QM
+SDPS: boot -f _flash.bin
+
+FB: ucmd setenv fastboot_buffer ${loadaddr}
+FB: download -f _image
+# Burn image to nandfit partition if needed
+FB: ucmd if env exists nandfit_part; then nand erase.part nandfit; nand write ${fastboot_buffer} nandfit ${filesize}; else true; fi;
+FB: ucmd nandbcb init ${fastboot_buffer} nandboot ${filesize}
+
+FB[-t 10000]: ucmd ubi part nandrootfs
+FB[-t 10000]: ucmd ubi create root -
+FB: download -f _filesystem
+FB[-t 60000]: ucmd ubi write ${loadaddr} root ${filesize}
+
+FB: download -f _kernel
+FB[-t 10000]: ucmd nand write ${loadaddr} nandkernel ${filesize}
+
+FB: download -f _dtb
+FB[-t 8000]: ucmd nand write ${loadaddr} nanddtb ${filesize}
+
+FB: reboot
+FB: done
diff --git a/board/bsh/imx8mn-bsh-smm-s2/patches/linux/0001-dmaengine-mxs-use-platform_driver_register.patch b/board/bsh/imx8mn-bsh-smm-s2/patches/linux/0001-dmaengine-mxs-use-platform_driver_register.patch
new file mode 100644
index 000000000000..d19782656210
--- /dev/null
+++ b/board/bsh/imx8mn-bsh-smm-s2/patches/linux/0001-dmaengine-mxs-use-platform_driver_register.patch
@@ -0,0 +1,64 @@
+From fd270493d83fa97568f605552656f48c932d1237 Mon Sep 17 00:00:00 2001
+From: Dario Binacchi <dario.binacchi@amarulasolutions.com>
+Date: Sun, 22 May 2022 17:40:15 +0200
+Subject: [PATCH 1/2] dmaengine: mxs: use platform_driver_register
+
+Driver registration fails on SOC imx8mn as its supplier, the clock
+control module, is probed later than subsys initcall level. This driver
+uses platform_driver_probe which is not compatible with deferred probing
+and won't be probed again later if probe function fails due to clock not
+being available at that time.
+
+This patch replaces the use of platform_driver_probe with
+platform_driver_register which will allow probing the driver later again
+when the clock control module will be available.
+
+Fixes: a580b8c5429a ("dmaengine: mxs-dma: add dma support for i.MX23/28")
+Co-developed-by: Michael Trimarchi <michael@amarulasolutions.com>
+Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
+Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
+Cc: stable@vger.kernel.org
+
+Series-version: 5
+
+Series-changes: 5
+- Update the commit message.
+- Create a new patch to remove the warning generated by this patch.
+
+Series-changes: 4
+- Restore __init in front of mxs_dma_probe() definition.
+- Rename the mxs_dma_driver variable to mxs_dma_driver_probe.
+- Update the commit message.
+- Use builtin_platform_driver() instead of module_platform_driver().
+
+Series-changes: 3
+- Restore __init in front of mxs_dma_init() definition.
+
+Series-changes: 2
+- Add the tag "Cc: stable@vger.kernel.org" in the sign-off area.
+
+Series-cc: linux-amarula@amarulasolutions.com
+---
+ drivers/dma/mxs-dma.c | 8 ++------
+ 1 file changed, 2 insertions(+), 6 deletions(-)
+
+diff --git a/drivers/dma/mxs-dma.c b/drivers/dma/mxs-dma.c
+index 994fc4d2aca4..18f8154b859b 100644
+--- a/drivers/dma/mxs-dma.c
++++ b/drivers/dma/mxs-dma.c
+@@ -839,10 +839,6 @@ static struct platform_driver mxs_dma_driver = {
+ .name = "mxs-dma",
+ .of_match_table = mxs_dma_dt_ids,
+ },
++ .probe = mxs_dma_probe,
+ };
+-
+-static int __init mxs_dma_module_init(void)
+-{
+- return platform_driver_probe(&mxs_dma_driver, mxs_dma_probe);
+-}
+-subsys_initcall(mxs_dma_module_init);
++builtin_platform_driver(mxs_dma_driver);
+--
+2.32.0
+
diff --git a/board/bsh/imx8mn-bsh-smm-s2/patches/linux/0002-dmaengine-mxs-fix-section-mismatch.patch b/board/bsh/imx8mn-bsh-smm-s2/patches/linux/0002-dmaengine-mxs-fix-section-mismatch.patch
new file mode 100644
index 000000000000..a307775c669b
--- /dev/null
+++ b/board/bsh/imx8mn-bsh-smm-s2/patches/linux/0002-dmaengine-mxs-fix-section-mismatch.patch
@@ -0,0 +1,35 @@
+From 145ee0b2e192da90348f1c77ea9c69ba7001159c Mon Sep 17 00:00:00 2001
+From: Dario Binacchi <dario.binacchi@amarulasolutions.com>
+Date: Tue, 12 Jul 2022 15:15:19 +0200
+Subject: [PATCH 2/2] dmaengine: mxs: fix section mismatch
+
+The patch was suggested by the following modpost warning:
+
+WARNING: modpost: vmlinux.o(.data+0xa3900): Section mismatch in reference from the variable mxs_dma_driver to the function .init.text:mxs_dma_probe()
+The variable mxs_dma_driver references
+the function __init mxs_dma_probe()
+If the reference is valid then annotate the
+variable with __init* or __refdata (see linux/init.h) or name the variable:
+*_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console
+
+Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
+---
+ drivers/dma/mxs-dma.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/drivers/dma/mxs-dma.c b/drivers/dma/mxs-dma.c
+index 18f8154b859b..a01953e06048 100644
+--- a/drivers/dma/mxs-dma.c
++++ b/drivers/dma/mxs-dma.c
+@@ -834,7 +834,7 @@ static int __init mxs_dma_probe(struct platform_device *pdev)
+ return 0;
+ }
+
+-static struct platform_driver mxs_dma_driver = {
++static struct platform_driver mxs_dma_driver __initdata = {
+ .driver = {
+ .name = "mxs-dma",
+ .of_match_table = mxs_dma_dt_ids,
+--
+2.32.0
+
diff --git a/board/bsh/imx8mn-bsh-smm-s2/patches/uboot/0001-include-configs-Remove-rootwait-1-to-all-the-affecte.patch b/board/bsh/imx8mn-bsh-smm-s2/patches/uboot/0001-include-configs-Remove-rootwait-1-to-all-the-affecte.patch
new file mode 100644
index 000000000000..7ec8a97a0c9a
--- /dev/null
+++ b/board/bsh/imx8mn-bsh-smm-s2/patches/uboot/0001-include-configs-Remove-rootwait-1-to-all-the-affecte.patch
@@ -0,0 +1,159 @@
+From d818bfb185a9f62fc988141d2dbbf9e9bc8ffa5d Mon Sep 17 00:00:00 2001
+From: Michael Trimarchi <michael@amarulasolutions.com>
+Date: Sun, 22 May 2022 15:22:08 +0200
+Subject: [PATCH 06/10] include/configs: Remove rootwait=1 to all the affected
+ boards
+
+rootwait=1 is not a valid kernel boot parameters. According
+to the documenation is only rootwait
+
+rootwait [KNL] Wait (indefinitely) for root device to show up.
+ Useful for devices that are detected asynchronously
+ (e.g. USB and MMC devices).
+
+Fix:
+Unknown kernel command line parameters "rootwait=1", will be passed to user space.
+
+Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
+Reviewed-by: Heiko Schocher <hs@denx.de>
+---
+ include/configs/am335x_evm.h | 2 +-
+ include/configs/am43xx_evm.h | 2 +-
+ include/configs/baltos.h | 2 +-
+ include/configs/chiliboard.h | 2 +-
+ include/configs/etamin.h | 2 +-
+ include/configs/imx8mn_bsh_smm_s2.h | 2 +-
+ include/configs/siemens-am33x-common.h | 4 ++--
+ include/configs/ti_armv7_keystone2.h | 2 +-
+ include/environment/ti/nand.h | 2 +-
+ 9 files changed, 10 insertions(+), 10 deletions(-)
+
+diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
+index fd5b209a52db..f301a6dc835b 100644
+--- a/include/configs/am335x_evm.h
++++ b/include/configs/am335x_evm.h
+@@ -34,7 +34,7 @@
+ "root=${nandroot} " \
+ "rootfstype=${nandrootfstype}\0" \
+ "nandroot=ubi0:rootfs rw ubi.mtd=NAND.file-system,2048\0" \
+- "nandrootfstype=ubifs rootwait=1\0" \
++ "nandrootfstype=ubifs rootwait\0" \
+ "nandboot=echo Booting from nand ...; " \
+ "run nandargs; " \
+ "nand read ${fdtaddr} NAND.u-boot-spl-os; " \
+diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h
+index 5057441f7506..1f5c3cd04e88 100644
+--- a/include/configs/am43xx_evm.h
++++ b/include/configs/am43xx_evm.h
+@@ -166,7 +166,7 @@
+ "root=${nandroot} " \
+ "rootfstype=${nandrootfstype}\0" \
+ "nandroot=ubi0:rootfs rw ubi.mtd=NAND.file-system,4096\0" \
+- "nandrootfstype=ubifs rootwait=1\0" \
++ "nandrootfstype=ubifs rootwait\0" \
+ "nandboot=echo Booting from nand ...; " \
+ "run nandargs; " \
+ "nand read ${fdtaddr} NAND.u-boot-spl-os; " \
+diff --git a/include/configs/baltos.h b/include/configs/baltos.h
+index b881d8c03fd7..7b43741fde7c 100644
+--- a/include/configs/baltos.h
++++ b/include/configs/baltos.h
+@@ -37,7 +37,7 @@
+ "root=${nandroot} " \
+ "rootfstype=${nandrootfstype}\0" \
+ "nandroot=ubi0:rootfs rw ubi.mtd=5\0" \
+- "nandrootfstype=ubifs rootwait=1\0" \
++ "nandrootfstype=ubifs rootwait\0" \
+ "nandboot=echo Booting from nand ...; " \
+ "run nandargs; " \
+ "setenv loadaddr 0x84000000; " \
+diff --git a/include/configs/chiliboard.h b/include/configs/chiliboard.h
+index 82acda595f09..8bad0f9ac4b6 100644
+--- a/include/configs/chiliboard.h
++++ b/include/configs/chiliboard.h
+@@ -20,7 +20,7 @@
+ "root=${nandroot} " \
+ "rootfstype=${nandrootfstype}\0" \
+ "nandroot=ubi0:rootfs rw ubi.mtd=NAND.file-system\0" \
+- "nandrootfstype=ubifs rootwait=1\0" \
++ "nandrootfstype=ubifs rootwait\0" \
+ "nandboot=echo Booting from nand ...; " \
+ "run nandargs; " \
+ "nand read ${fdt_addr} NAND.u-boot-spl-os; " \
+diff --git a/include/configs/etamin.h b/include/configs/etamin.h
+index dc83ab71908b..3548382d2036 100644
+--- a/include/configs/etamin.h
++++ b/include/configs/etamin.h
+@@ -113,7 +113,7 @@
+ "nand_active_ubi_vol=rootfs_a\0" \
+ "rootfs_name=rootfs\0" \
+ "kernel_name=uImage\0"\
+- "nand_root_fs_type=ubifs rootwait=1\0" \
++ "nand_root_fs_type=ubifs rootwait\0" \
+ "nand_args=run bootargs_defaults;" \
+ "mtdparts default;" \
+ "setenv ${partitionset_active} true;" \
+diff --git a/include/configs/imx8mn_bsh_smm_s2.h b/include/configs/imx8mn_bsh_smm_s2.h
+index 098f23b206d1..f7529783692e 100644
+--- a/include/configs/imx8mn_bsh_smm_s2.h
++++ b/include/configs/imx8mn_bsh_smm_s2.h
+@@ -21,7 +21,7 @@
+ "root=${nandroot} " \
+ "rootfstype=${nandrootfstype}\0" \
+ "nandroot=ubi0:root rw ubi.mtd=nandrootfs\0" \
+- "nandrootfstype=ubifs rootwait=1\0" \
++ "nandrootfstype=ubifs rootwait\0" \
+ "nandboot=echo Booting from nand ...; " \
+ "run nandargs; " \
+ "nand read ${fdt_addr_r} nanddtb; " \
+diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h
+index 08c4d52d658f..9f1a6cd51b40 100644
+--- a/include/configs/siemens-am33x-common.h
++++ b/include/configs/siemens-am33x-common.h
+@@ -237,7 +237,7 @@
+ "nand_active_ubi_vol=rootfs_a\0" \
+ "nand_active_ubi_vol_A=rootfs_a\0" \
+ "nand_active_ubi_vol_B=rootfs_b\0" \
+- "nand_root_fs_type=ubifs rootwait=1\0" \
++ "nand_root_fs_type=ubifs rootwait\0" \
+ "nand_src_addr=0x280000\0" \
+ "nand_src_addr_A=0x280000\0" \
+ "nand_src_addr_B=0x780000\0" \
+@@ -314,7 +314,7 @@
+ "nand_active_ubi_vol=rootfs_a\0" \
+ "rootfs_name=rootfs\0" \
+ "kernel_name=uImage\0"\
+- "nand_root_fs_type=ubifs rootwait=1\0" \
++ "nand_root_fs_type=ubifs rootwait\0" \
+ "nand_args=run bootargs_defaults;" \
+ "mtdparts default;" \
+ "setenv ${partitionset_active} true;" \
+diff --git a/include/configs/ti_armv7_keystone2.h b/include/configs/ti_armv7_keystone2.h
+index 57f013cbf846..133daecf7164 100644
+--- a/include/configs/ti_armv7_keystone2.h
++++ b/include/configs/ti_armv7_keystone2.h
+@@ -180,7 +180,7 @@
+ "sf write ${loadaddr} 0 ${filesize}\0" \
+ "burn_uboot_nand=nand erase 0 0x100000; " \
+ "nand write ${loadaddr} 0 ${filesize}\0" \
+- "args_all=setenv bootargs console=ttyS0,115200n8 rootwait=1 " \
++ "args_all=setenv bootargs console=ttyS0,115200n8 rootwait " \
+ KERNEL_MTD_PARTS \
+ "args_net=setenv bootargs ${bootargs} rootfstype=nfs " \
+ "root=/dev/nfs rw nfsroot=${serverip}:${nfs_root}," \
+diff --git a/include/environment/ti/nand.h b/include/environment/ti/nand.h
+index 11dcefcc41ca..7d00afa2b10f 100644
+--- a/include/environment/ti/nand.h
++++ b/include/environment/ti/nand.h
+@@ -14,7 +14,7 @@
+ "root=${nandroot} " \
+ "rootfstype=${nandrootfstype}\0" \
+ "nandroot=ubi0:rootfs rw ubi.mtd=NAND.file-system,2048\0" \
+- "nandrootfstype=ubifs rootwait=1\0" \
++ "nandrootfstype=ubifs rootwait\0" \
+ "nandboot=echo Booting from nand ...; " \
+ "run nandargs; " \
+ "nand read ${fdtaddr} NAND.u-boot-spl-os; " \
+--
+2.32.0
+
diff --git a/board/bsh/imx8mn-bsh-smm-s2/post-build.sh b/board/bsh/imx8mn-bsh-smm-s2/post-build.sh
new file mode 100755
index 000000000000..49df4cd6fb10
--- /dev/null
+++ b/board/bsh/imx8mn-bsh-smm-s2/post-build.sh
@@ -0,0 +1,4 @@
+#!/bin/sh
+BOARD_DIR="$(dirname $0)"
+
+cp ${BOARD_DIR}/nand-full.lst ${BINARIES_DIR}
diff --git a/board/bsh/imx8mn-bsh-smm-s2/readme.txt b/board/bsh/imx8mn-bsh-smm-s2/readme.txt
new file mode 100644
index 000000000000..37081091e849
--- /dev/null
+++ b/board/bsh/imx8mn-bsh-smm-s2/readme.txt
@@ -0,0 +1,75 @@
+i.MX8MN BSH SMM S2
+==================
+
+This tutorial describes how to use the predefined Buildroot
+configuration for the i.MX8MN BSH SMM S2 PRO board.
+
+Building
+--------
+
+Configure buildroot:
+
+ $ make imx8mn_bsh_smm_s2_defconfig
+
+Change settings to fit your needs (optional):
+
+ $ make menuconfig
+
+Compile everything and build the rootfs image:
+
+ $ make
+
+
+Result of the build
+-------------------
+
+After building, the output/images directory contains:
+
+ output/images/
+ ├── bl31.bin
+ ├── ddr3*
+ ├── flash.bin
+ ├── freescale/imx8mn-bsh-smm-s2.dtb
+ ├── Image
+ ├── nand-full.lst
+ ├── rootfs.ext2
+ ├── rootfs.ext4 -> rootfs.ext2
+ ├── rootfs.tar
+ ├── rootfs.ubifs
+ ├── u-boot.bin
+ └── u-boot-spl.bin
+
+
+Preparing the board
+-------------------
+
+Plug the USB type A to micro B cable into the USB Debug
+Connector (DBG UART). Use serial port settings 115200 8N1
+to access the debug console.
+
+Plug another USB type A to micro B cable into the USB-OTG
+Connector (USB1). This connection is used to flash the board
+firmware using the Freescale/NXP UUU tool.
+
+Connect the power supply/adaptor to the DC Power Jack (labelled
++5V).
+
+
+Flashing
+--------
+
+Power up the board by switching on the Power ON Switch, which is
+placed right next to the DC Jack.
+
+Enter the following U-Boot commands on the debug serial console:
+
+ $ nand erase.chip
+ $ reset
+
+Flash the built images directly to board’s memory. On your computer,
+run:
+
+ $ board/bsh/imx8mn-bsh-smm-s2/flash.sh output/
+
+It will flash the bootloader, the Device Tree Blob, the kernel image
+and the UBI root file system.
diff --git a/configs/imx8mn_bsh_smm_s2_defconfig b/configs/imx8mn_bsh_smm_s2_defconfig
new file mode 100644
index 000000000000..bf91afb73543
--- /dev/null
+++ b/configs/imx8mn_bsh_smm_s2_defconfig
@@ -0,0 +1,40 @@
+BR2_aarch64=y
+BR2_GLOBAL_PATCH_DIR="board/bsh/imx8mn-bsh-smm-s2/patches"
+BR2_TARGET_GENERIC_GETTY_PORT="ttymxc3"
+BR2_ROOTFS_POST_BUILD_SCRIPT="board/bsh/imx8mn-bsh-smm-s2/post-build.sh"
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.18"
+BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
+BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/bsh/imx8mn-bsh-smm-s2/linux.fragment"
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="freescale/imx8mn-bsh-smm-s2"
+BR2_LINUX_KERNEL_DTB_KEEP_DIRNAME=y
+BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
+BR2_PACKAGE_FREESCALE_IMX=y
+BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MN=y
+BR2_PACKAGE_FIRMWARE_IMX=y
+BR2_PACKAGE_FIRMWARE_IMX_DDR3=y
+BR2_TARGET_ROOTFS_UBIFS=y
+BR2_TARGET_ROOTFS_UBIFS_LEBSIZE=0x1f000
+BR2_TARGET_ROOTFS_UBIFS_RT_NONE=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.5"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="imx8mn"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="IMX_BOOT_UART_BASE=0x30a60000"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_DEBUG=y
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.07"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="imx8mn_bsh_smm_s2"
+BR2_TARGET_UBOOT_NEEDS_DTC=y
+BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
+BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
+BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
+BR2_TARGET_UBOOT_NEEDS_IMX_FIRMWARE=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="flash.bin"
+BR2_TARGET_UBOOT_SPL=y
+BR2_PACKAGE_HOST_UUU=y
--
2.32.0
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [Buildroot] [PATCH v3 2/2] configs/imx8mn_bsh_smm_s2_pro_defconfig: new defconfig
2022-07-13 6:30 [Buildroot] [PATCH v3 0/2] Add support for BSH smm s2 [pro] boards Dario Binacchi
2022-07-13 6:30 ` [Buildroot] [PATCH v3 1/2] configs/imx8mn_bsh_smm_s2_defconfig: new defconfig Dario Binacchi
@ 2022-07-13 6:30 ` Dario Binacchi
2022-07-29 21:26 ` Giulio Benetti
1 sibling, 1 reply; 7+ messages in thread
From: Dario Binacchi @ 2022-07-13 6:30 UTC (permalink / raw)
To: buildroot
Cc: Michael Trimarchi, Ariel D'Alessandro, Jagan Teki,
Ariel D'Alessandro, Heiko Thiery, Dario Binacchi,
linux-amarula, Giulio Benetti
From: Michael Trimarchi <michael@amarulasolutions.com>
BSH SMM S2 PRO (SystemMaster S2 Pro) Board is an add-on board which
provide input and output interfaces to a dedicated carrier board. It is
designed mainly to provide graphical/video and connectivity interfaces
to the appliance.
Board support package includes the following components:
- mainline Linux kernel 5.18
- mainline U-Boot 2022-07
- Default packages from buildroot
https://www.apertis.org/reference_hardware/imx8mn_bsh_smm_s2pro_setup/
Add Ariel D'Alessandro and Dario Binacchi as co-maintainer, we work
together on platform mainline
Build and tested using:
docker pull registry.gitlab.com/buildroot.org/buildroot/base:20220105.2314
Cc: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Heiko Thiery <heiko.thiery@gmail.com>
Cc: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Tested-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
---
Changes in v3:
- Update the commit description.
- Bump U-Boot to version 2022-07.
Changes in v2:
- Change commit subject line.
- Use the buildroot's output directory if the binaries directory is
not passed as a parameter to the `flash.sh' script.
- Replace the linux.config file with an architectural defconfig and
a config fragment for the changes.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
---
DEVELOPERS | 4 +
.../imx8mn-bsh-smm-s2/linux.fragment | 0
board/bsh/imx8mn-bsh-smm-s2-pro/extlinux.conf | 4 +
board/bsh/imx8mn-bsh-smm-s2-pro/flash.sh | 23 ++++++
board/bsh/imx8mn-bsh-smm-s2-pro/genimage.cfg | 17 +++++
board/bsh/imx8mn-bsh-smm-s2-pro/post-build.sh | 7 ++
board/bsh/imx8mn-bsh-smm-s2-pro/post-image.sh | 3 +
board/bsh/imx8mn-bsh-smm-s2-pro/readme.txt | 73 +++++++++++++++++++
configs/imx8mn_bsh_smm_s2_defconfig | 2 +-
configs/imx8mn_bsh_smm_s2_pro_defconfig | 41 +++++++++++
10 files changed, 173 insertions(+), 1 deletion(-)
rename board/bsh/{ => common}/imx8mn-bsh-smm-s2/linux.fragment (100%)
create mode 100644 board/bsh/imx8mn-bsh-smm-s2-pro/extlinux.conf
create mode 100755 board/bsh/imx8mn-bsh-smm-s2-pro/flash.sh
create mode 100644 board/bsh/imx8mn-bsh-smm-s2-pro/genimage.cfg
create mode 100755 board/bsh/imx8mn-bsh-smm-s2-pro/post-build.sh
create mode 100755 board/bsh/imx8mn-bsh-smm-s2-pro/post-image.sh
create mode 100644 board/bsh/imx8mn-bsh-smm-s2-pro/readme.txt
create mode 100644 configs/imx8mn_bsh_smm_s2_pro_defconfig
diff --git a/DEVELOPERS b/DEVELOPERS
index 33a77f462166..b6eebfc5fa84 100644
--- a/DEVELOPERS
+++ b/DEVELOPERS
@@ -215,6 +215,8 @@ F: configs/snps_archs38_haps_defconfig
F: configs/snps_archs38_hsdk_defconfig
N: Ariel D'Alessandro <ariel@vanguardiasur.com.ar>
+F: board/bsh/
+F: configs/imx8mn_bsh_smm_s2_pro_defconfig
F: package/axfsutils/
F: package/mali-t76x/
@@ -659,6 +661,7 @@ F: package/xinetd/
N: Dario Binacchi <dario.binacchi@amarulasolutions.com>
F: board/bsh/
F: configs/imx8mn_bsh_smm_s2_defconfig
+F: configs/imx8mn_bsh_smm_s2_pro_defconfig
F: package/uuu/
N: Dario Binacchi <dariobin@libero.it>
@@ -2049,6 +2052,7 @@ F: package/python-pyzmq/
N: Michael Trimarchi <michael@amarulasolutions.com>
F: board/bsh/
F: configs/imx8mn_bsh_smm_s2_defconfig
+F: configs/imx8mn_bsh_smm_s2_pro_defconfig
F: package/python-spidev/
N: Michael Vetter <jubalh@iodoru.org>
diff --git a/board/bsh/imx8mn-bsh-smm-s2/linux.fragment b/board/bsh/common/imx8mn-bsh-smm-s2/linux.fragment
similarity index 100%
rename from board/bsh/imx8mn-bsh-smm-s2/linux.fragment
rename to board/bsh/common/imx8mn-bsh-smm-s2/linux.fragment
diff --git a/board/bsh/imx8mn-bsh-smm-s2-pro/extlinux.conf b/board/bsh/imx8mn-bsh-smm-s2-pro/extlinux.conf
new file mode 100644
index 000000000000..911135474253
--- /dev/null
+++ b/board/bsh/imx8mn-bsh-smm-s2-pro/extlinux.conf
@@ -0,0 +1,4 @@
+label buildroot
+ kernel /boot/Image
+ devicetree /boot/freescale/imx8mn-bsh-smm-s2pro.dtb
+ append root=PARTUUID=%PARTUUID% rootwait rw
diff --git a/board/bsh/imx8mn-bsh-smm-s2-pro/flash.sh b/board/bsh/imx8mn-bsh-smm-s2-pro/flash.sh
new file mode 100755
index 000000000000..17b20f009771
--- /dev/null
+++ b/board/bsh/imx8mn-bsh-smm-s2-pro/flash.sh
@@ -0,0 +1,23 @@
+#!/bin/bash
+
+if [ $# -eq 0 ]; then
+ OUTPUT_DIR=output
+else
+ OUTPUT_DIR=$1
+fi
+
+if ! test -d "${OUTPUT_DIR}" ; then
+ echo "ERROR: no output directory specified."
+ echo "Usage: $0 OUTPUT_DIR"
+ echo ""
+ echo "Arguments:"
+ echo " OUTPUT_DIR The Buildroot output directory."
+ exit 1
+fi
+
+IMAGES_DIR=${OUTPUT_DIR}/images
+
+${OUTPUT_DIR}/host/bin/uuu -v -b emmc_all \
+ ${IMAGES_DIR}/flash.bin \
+ ${IMAGES_DIR}/sdcard.img
+
diff --git a/board/bsh/imx8mn-bsh-smm-s2-pro/genimage.cfg b/board/bsh/imx8mn-bsh-smm-s2-pro/genimage.cfg
new file mode 100644
index 000000000000..bc100b171dd6
--- /dev/null
+++ b/board/bsh/imx8mn-bsh-smm-s2-pro/genimage.cfg
@@ -0,0 +1,17 @@
+image sdcard.img {
+ hdimage {
+ partition-table-type = "gpt"
+ }
+
+ partition imx-boot {
+ in-partition-table = "no"
+ image = "flash.bin"
+ offset = 33K
+ }
+
+ partition rootfs {
+ offset = 8M
+ image = "rootfs.ext4"
+ partition-uuid = %PARTUUID%
+ }
+}
diff --git a/board/bsh/imx8mn-bsh-smm-s2-pro/post-build.sh b/board/bsh/imx8mn-bsh-smm-s2-pro/post-build.sh
new file mode 100755
index 000000000000..bf8861f6a914
--- /dev/null
+++ b/board/bsh/imx8mn-bsh-smm-s2-pro/post-build.sh
@@ -0,0 +1,7 @@
+#!/bin/sh
+BOARD_DIR="$(dirname $0)"
+PARTUUID="$($HOST_DIR/bin/uuidgen)"
+
+install -d "$TARGET_DIR/boot/extlinux/"
+sed "s/%PARTUUID%/$PARTUUID/g" "$BOARD_DIR/extlinux.conf" > "$TARGET_DIR/boot/extlinux/extlinux.conf"
+sed "s/%PARTUUID%/$PARTUUID/g" "$BOARD_DIR/genimage.cfg" > "$BINARIES_DIR/genimage.cfg"
diff --git a/board/bsh/imx8mn-bsh-smm-s2-pro/post-image.sh b/board/bsh/imx8mn-bsh-smm-s2-pro/post-image.sh
new file mode 100755
index 000000000000..3452fd4501f8
--- /dev/null
+++ b/board/bsh/imx8mn-bsh-smm-s2-pro/post-image.sh
@@ -0,0 +1,3 @@
+#!/bin/sh
+
+support/scripts/genimage.sh -c ${BINARIES_DIR}/genimage.cfg
diff --git a/board/bsh/imx8mn-bsh-smm-s2-pro/readme.txt b/board/bsh/imx8mn-bsh-smm-s2-pro/readme.txt
new file mode 100644
index 000000000000..5763f164fe13
--- /dev/null
+++ b/board/bsh/imx8mn-bsh-smm-s2-pro/readme.txt
@@ -0,0 +1,73 @@
+i.MX8MN BSH SMM S2 PRO
+======================
+
+How to build it
+---------------
+
+Configure buildroot:
+
+ $ make imx8mn_bsh_smm_s2_pro_defconfig
+
+Change settings to fit your needs (optional):
+
+ $ make menuconfig
+
+Compile everything and build the rootfs image:
+
+ $ make
+
+
+Result of the build
+-------------------
+
+After building, the output/images directory contains:
+
+ output/images/
+ ├── bl31.bin
+ ├── Image
+ ├── flash.bin
+ ├── ddr3*
+ ├── rootfs.ext2
+ ├── rootfs.ext4 -> rootfs.ext2
+ ├── rootfs.tar
+ ├── sdcard.img
+ ├── u-boot.bin
+ ├── u-boot-nodtb.bin
+ └── u-boot-spl.bin
+
+
+Preparing the board
+-------------------
+
+Plug the USB type A to micro B cable into the USB Debug
+Connector (DBG UART). Use serial port settings 115200 8N1
+to access the debug console.
+
+Plug another USB type A to micro B cable into the USB-OTG
+Connector (USB1). This connection is used to flash the board
+firmware using the Freescale/NXP UUU tool.
+
+Connect the power supply/adaptor to the DC Power Jack (labelled
++5V).
+
+
+Flashing the emmc card image
+----------------------------
+
+Power up the board by switching on the Power ON Switch, which is
+placed right next to the DC Jack.
+
+Enter the following U-Boot commands on the debug serial console:
+
+ $ fastboot usb 0
+
+Flash the images on eMMC. On your computer, run:
+
+ $ board/bsh/imx8mn-bsh-smm-s2-pro/flash.sh output/
+
+
+Booting the board
+-----------------
+
+By default the bootloader will search for the first valid image,
+starting with the internal eMMC.
diff --git a/configs/imx8mn_bsh_smm_s2_defconfig b/configs/imx8mn_bsh_smm_s2_defconfig
index bf91afb73543..7a0eb5ed4591 100644
--- a/configs/imx8mn_bsh_smm_s2_defconfig
+++ b/configs/imx8mn_bsh_smm_s2_defconfig
@@ -6,7 +6,7 @@ BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.18"
BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
-BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/bsh/imx8mn-bsh-smm-s2/linux.fragment"
+BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/bsh/common/imx8mn-bsh-smm-s2/linux.fragment"
BR2_LINUX_KERNEL_DTS_SUPPORT=y
BR2_LINUX_KERNEL_INTREE_DTS_NAME="freescale/imx8mn-bsh-smm-s2"
BR2_LINUX_KERNEL_DTB_KEEP_DIRNAME=y
diff --git a/configs/imx8mn_bsh_smm_s2_pro_defconfig b/configs/imx8mn_bsh_smm_s2_pro_defconfig
new file mode 100644
index 000000000000..ee8f79b5cd21
--- /dev/null
+++ b/configs/imx8mn_bsh_smm_s2_pro_defconfig
@@ -0,0 +1,41 @@
+BR2_aarch64=y
+BR2_TARGET_GENERIC_GETTY_PORT="ttymxc3"
+BR2_ROOTFS_POST_BUILD_SCRIPT="board/bsh/imx8mn-bsh-smm-s2-pro/post-build.sh"
+BR2_ROOTFS_POST_IMAGE_SCRIPT="board/bsh/imx8mn-bsh-smm-s2-pro/post-image.sh"
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.18"
+BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
+BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/bsh/common/imx8mn-bsh-smm-s2/linux.fragment"
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="freescale/imx8mn-bsh-smm-s2pro"
+BR2_LINUX_KERNEL_DTB_KEEP_DIRNAME=y
+BR2_LINUX_KERNEL_INSTALL_TARGET=y
+BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
+BR2_PACKAGE_FREESCALE_IMX=y
+BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MN=y
+BR2_PACKAGE_FIRMWARE_IMX=y
+BR2_PACKAGE_FIRMWARE_IMX_DDR3=y
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.5"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="imx8mn"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="IMX_BOOT_UART_BASE=0x30a60000"
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.07"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="imx8mn_bsh_smm_s2pro"
+BR2_TARGET_UBOOT_NEEDS_DTC=y
+BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
+BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
+BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
+BR2_TARGET_UBOOT_NEEDS_IMX_FIRMWARE=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="flash.bin"
+BR2_TARGET_UBOOT_SPL=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_UUU=y
--
2.32.0
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [Buildroot] [PATCH v3 1/2] configs/imx8mn_bsh_smm_s2_defconfig: new defconfig
2022-07-13 6:30 ` [Buildroot] [PATCH v3 1/2] configs/imx8mn_bsh_smm_s2_defconfig: new defconfig Dario Binacchi
@ 2022-07-29 21:19 ` Giulio Benetti
2022-09-01 15:13 ` Dario Binacchi
0 siblings, 1 reply; 7+ messages in thread
From: Giulio Benetti @ 2022-07-29 21:19 UTC (permalink / raw)
To: Dario Binacchi, buildroot
Cc: Michael Trimarchi, linux-amarula, Ariel D'Alessandro
Hi Dario, Michael, Ariel, All,
On 13/07/22 08:30, Dario Binacchi wrote:
> BSH SMM S2 (SystemMaster S2) Board is an add-on board which provide
> input and output interfaces to a dedicated carrier board. It is designed
> mainly to provide graphical/video and connectivity interfaces to the
> appliance.
Can you please provide an URL to the product here in commit log?
> Board support package includes the following components:
> - mainline Linux kernel 5.18
> - mainline U-Boot 2022-07
> - default packages from buildroot
>
> Patches applied to the Linux kernel and U-Boot have been submitted but
> not merged yet.
>
> Co-authored-by: Michael Trimarchi <michael@amarulasolutions.com>
> Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
> Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
> ---
>
> Changes in v3:
> - Update the commit description.
> - Bump U-Boot to version 2022-07.
> - Remove U-Boot patches merged in version 2022-07.
> - Update the Linux patches.
>
> Changes in v2:
> - Change commit subject and description.
> - Update linux patch to version 4. It hasn't been merged yet but has
> been reviewed. This is the most up-to-date version.
> - Replace `Co-developed-by:' tag with `Co-authored-by'.
> - Use the buildroot's output directory if the binaries directory is
> not passed as a parameter to the `flash.sh' script.
> - Replace the linux.config file with an architectural defconfig and
> a config fragment for the changes.
> - Remove useless and deprecated statements in nand-full.lst.
> - Remove the buildroot configurations for ext2/ext4 filesystem creation.
>
> Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
> ---
> DEVELOPERS | 4 +
> board/bsh/imx8mn-bsh-smm-s2/flash.sh | 26 +
> board/bsh/imx8mn-bsh-smm-s2/linux.fragment | 931 ++++++++++++++++++
> board/bsh/imx8mn-bsh-smm-s2/nand-full.lst | 29 +
> ...ine-mxs-use-platform_driver_register.patch | 64 ++
> ...2-dmaengine-mxs-fix-section-mismatch.patch | 35 +
> ...Remove-rootwait-1-to-all-the-affecte.patch | 159 +++
> board/bsh/imx8mn-bsh-smm-s2/post-build.sh | 4 +
> board/bsh/imx8mn-bsh-smm-s2/readme.txt | 75 ++
> configs/imx8mn_bsh_smm_s2_defconfig | 40 +
> 10 files changed, 1367 insertions(+)
> create mode 100755 board/bsh/imx8mn-bsh-smm-s2/flash.sh
> create mode 100644 board/bsh/imx8mn-bsh-smm-s2/linux.fragment
> create mode 100644 board/bsh/imx8mn-bsh-smm-s2/nand-full.lst
> create mode 100644 board/bsh/imx8mn-bsh-smm-s2/patches/linux/0001-dmaengine-mxs-use-platform_driver_register.patch
> create mode 100644 board/bsh/imx8mn-bsh-smm-s2/patches/linux/0002-dmaengine-mxs-fix-section-mismatch.patch
> create mode 100644 board/bsh/imx8mn-bsh-smm-s2/patches/uboot/0001-include-configs-Remove-rootwait-1-to-all-the-affecte.patch
> create mode 100755 board/bsh/imx8mn-bsh-smm-s2/post-build.sh
> create mode 100644 board/bsh/imx8mn-bsh-smm-s2/readme.txt
> create mode 100644 configs/imx8mn_bsh_smm_s2_defconfig
>
> diff --git a/DEVELOPERS b/DEVELOPERS
> index 0afd697b6cc6..33a77f462166 100644
> --- a/DEVELOPERS
> +++ b/DEVELOPERS
> @@ -657,6 +657,8 @@ F: package/luaexpat/
> F: package/xinetd/
>
> N: Dario Binacchi <dario.binacchi@amarulasolutions.com>
> +F: board/bsh/
> +F: configs/imx8mn_bsh_smm_s2_defconfig
> F: package/uuu/
>
> N: Dario Binacchi <dariobin@libero.it>
> @@ -2045,6 +2047,8 @@ F: package/python-crc16/
> F: package/python-pyzmq/
>
> N: Michael Trimarchi <michael@amarulasolutions.com>
> +F: board/bsh/
> +F: configs/imx8mn_bsh_smm_s2_defconfig
> F: package/python-spidev/
>
> N: Michael Vetter <jubalh@iodoru.org>
> diff --git a/board/bsh/imx8mn-bsh-smm-s2/flash.sh b/board/bsh/imx8mn-bsh-smm-s2/flash.sh
> new file mode 100755
> index 000000000000..1f343d516dcf
> --- /dev/null
> +++ b/board/bsh/imx8mn-bsh-smm-s2/flash.sh
> @@ -0,0 +1,26 @@
> +#!/bin/bash
> +
> +if [ $# -eq 0 ]; then
> + OUTPUT_DIR=output
> +else
> + OUTPUT_DIR=$1
> +fi
> +
> +if ! test -d "${OUTPUT_DIR}" ; then
> + echo "ERROR: no output directory specified."
> + echo "Usage: $0 OUTPUT_DIR"
> + echo ""
> + echo "Arguments:"
> + echo " OUTPUT_DIR The Buildroot output directory."
> + exit 1
> +fi
> +
> +IMAGES_DIR=${OUTPUT_DIR}/images
> +
> +${OUTPUT_DIR}/host/bin/uuu -v -b ${IMAGES_DIR}/nand-full.lst \
> + ${IMAGES_DIR}/flash.bin \
> + ${IMAGES_DIR}/flash.bin \
> + ${IMAGES_DIR}/rootfs.ubifs \
> + ${IMAGES_DIR}/Image \
> + ${IMAGES_DIR}/freescale/imx8mn-bsh-smm-s2.dtb
> +
> diff --git a/board/bsh/imx8mn-bsh-smm-s2/linux.fragment b/board/bsh/imx8mn-bsh-smm-s2/linux.fragment
> new file mode 100644
> index 000000000000..7388b7f1277c
> --- /dev/null
> +++ b/board/bsh/imx8mn-bsh-smm-s2/linux.fragment
> @@ -0,0 +1,931 @@
> +# CONFIG_BPF_SYSCALL is not set
> +# CONFIG_BPF_UNPRIV_DEFAULT_OFF is not set
> +CONFIG_TASK_DELAY_ACCT=y
> +CONFIG_CGROUP_FREEZER=y
> +# CONFIG_CGROUP_BPF is not set
> +CONFIG_RELAY=y
> +# CONFIG_ARCH_ACTIONS is not set
> +# CONFIG_ARCH_SUNXI is not set
> +# CONFIG_ARCH_ALPINE is not set
> +# CONFIG_ARCH_APPLE is not set
> +# CONFIG_ARCH_BCM2835 is not set
> +# CONFIG_ARCH_BCM4908 is not set
> +# CONFIG_ARCH_BCM_IPROC is not set
> +# CONFIG_ARCH_BERLIN is not set
> +# CONFIG_ARCH_BRCMSTB is not set
> +# CONFIG_ARCH_EXYNOS is not set
> +# CONFIG_ARCH_K3 is not set
> +# CONFIG_ARCH_LAYERSCAPE is not set
> +# CONFIG_ARCH_LG1K is not set
> +# CONFIG_ARCH_HISI is not set
> +# CONFIG_ARCH_KEEMBAY is not set
> +# CONFIG_ARCH_MEDIATEK is not set
> +# CONFIG_ARCH_MESON is not set
> +# CONFIG_ARCH_MVEBU is not set
> +# CONFIG_ARCH_QCOM is not set
> +# CONFIG_ARCH_RENESAS is not set
> +# CONFIG_ARCH_ROCKCHIP is not set
> +# CONFIG_ARCH_S32 is not set
> +# CONFIG_ARCH_SEATTLE is not set
> +# CONFIG_ARCH_INTEL_SOCFPGA is not set
> +# CONFIG_ARCH_SYNQUACER is not set
> +# CONFIG_ARCH_TEGRA is not set
> +# CONFIG_ARCH_TESLA_FSD is not set
> +# CONFIG_ARCH_SPRD is not set
> +# CONFIG_ARCH_THUNDER is not set
> +# CONFIG_ARCH_THUNDER2 is not set
> +# CONFIG_ARCH_UNIPHIER is not set
> +# CONFIG_ARCH_VEXPRESS is not set
> +# CONFIG_ARCH_VISCONTI is not set
> +# CONFIG_ARCH_XGENE is not set
> +# CONFIG_ARCH_ZYNQMP is not set
> +# CONFIG_PARAVIRT is not set
> +# CONFIG_KEXEC is not set
> +# CONFIG_KEXEC_FILE is not set
> +# CONFIG_XEN is not set
> +# CONFIG_ARM64_PTR_AUTH is not set
> +# CONFIG_ARM64_TLB_RANGE is not set
> +# CONFIG_ARM64_MTE is not set
> +CONFIG_PM_DEBUG=y
> +CONFIG_PM_TEST_SUSPEND=y
> +# CONFIG_HIBERNATION is not set
> +CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
> +CONFIG_CPU_FREQ_GOV_POWERSAVE=y
> +CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
> +CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
> +# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
> +# CONFIG_ARM_ALLWINNER_SUN50I_CPUFREQ_NVMEM is not set
> +# CONFIG_ARM_ARMADA_37XX_CPUFREQ is not set
> +CONFIG_ARM_IMX_CPUFREQ_DT=y
> +# CONFIG_ARM_QCOM_CPUFREQ_NVMEM is not set
> +# CONFIG_ARM_QCOM_CPUFREQ_HW is not set
> +# CONFIG_ARM_RASPBERRYPI_CPUFREQ is not set
> +# CONFIG_ARM_SCMI_CPUFREQ is not set
> +# CONFIG_ARM_TEGRA186_CPUFREQ is not set
> +# CONFIG_ARM_MEDIATEK_CPUFREQ is not set
> +# CONFIG_QORIQ_CPUFREQ is not set
> +# CONFIG_ACPI_APEI_PCIEAER is not set
> +# CONFIG_VIRTUALIZATION is not set
> +# CONFIG_KVM is not set
> +# CONFIG_GCC_PLUGINS is not set
> +CONFIG_SECCOMP=y
> +CONFIG_IPV6=y
> +CONFIG_MODVERSIONS=y
> +CONFIG_IPV6_SIT=m
> +# CONFIG_NET_DSA_TAG_BRCM is not set
> +# CONFIG_NET_DSA_TAG_BRCM_LEGACY is not set
> +# CONFIG_NET_DSA_TAG_BRCM_PREPEND is not set
> +CONFIG_NET_DSA_TAG_OCELOT=m
> +# CONFIG_NET_DSA_TAG_OCELOT_8021Q is not set
> +CONFIG_VLAN_8021Q=y
> +CONFIG_LLC2=y
> +CONFIG_NET_SCH_MULTIQ=m
> +CONFIG_NET_CLS_TCINDEX=m
> +CONFIG_NET_PKTGEN=m
> +CONFIG_BT=y
> +CONFIG_BT_LE=y
> +CONFIG_BT_RFCOMM=y
> +CONFIG_BT_RFCOMM_TTY=y
> +CONFIG_BT_BNEP=y
> +CONFIG_BT_BNEP_MC_FILTER=y
> +CONFIG_BT_BNEP_PROTO_FILTER=y
> +CONFIG_BT_HIDP=y
> +# CONFIG_CAN_RCAR is not set
> +# CONFIG_CAN_RCAR_CANFD is not set
> +# CONFIG_CAN_MCP251XFD is not set
> +CONFIG_BT_HCIUART=y
> +CONFIG_BT_HCIUART_BCSP=y
> +CONFIG_BT_HCIUART_ATH3K=y
> +CONFIG_BT_HCIUART_3WIRE=y
> +CONFIG_BT_HCIVHCI=y
> +CONFIG_CFG80211=y
> +CONFIG_NL80211_TESTMODE=y
> +CONFIG_CFG80211_WEXT=y
> +CONFIG_MAC80211=y
> +# CONFIG_BT_HCIUART_MRVL is not set
> +# CONFIG_BT_MRVL is not set
> +# CONFIG_BT_MRVL_SDIO is not set
> +# CONFIG_RFKILL is not set
> +# CONFIG_PCI is not set
> +# CONFIG_PCIEPORTBUS is not set
> +# CONFIG_PCIEAER is not set
> +# CONFIG_PCI_IOV is not set
> +# CONFIG_PCI_PASID is not set
> +# CONFIG_HOTPLUG_PCI is not set
> +# CONFIG_HOTPLUG_PCI_ACPI is not set
> +# CONFIG_PCI_AARDVARK is not set
> +# CONFIG_PCI_TEGRA is not set
> +# CONFIG_PCIE_RCAR_HOST is not set
> +# CONFIG_PCIE_RCAR_EP is not set
> +# CONFIG_PCI_HOST_GENERIC is not set
> +# CONFIG_PCI_XGENE is not set
> +# CONFIG_PCIE_ALTERA is not set
> +# CONFIG_PCIE_ALTERA_MSI is not set
> +# CONFIG_PCI_HOST_THUNDER_PEM is not set
> +# CONFIG_PCI_HOST_THUNDER_ECAM is not set
> +# CONFIG_PCIE_ROCKCHIP_HOST is not set
> +# CONFIG_PCIE_BRCMSTB is not set
> +# CONFIG_PCI_IMX6 is not set
> +# CONFIG_PCI_LAYERSCAPE is not set
> +# CONFIG_PCI_HISI is not set
> +# CONFIG_PCIE_QCOM is not set
> +# CONFIG_PCIE_ARMADA_8K is not set
> +# CONFIG_PCIE_KIRIN is not set
> +# CONFIG_PCIE_HISI_STB is not set
> +# CONFIG_PCIE_TEGRA194_HOST is not set
> +# CONFIG_PCIE_VISCONTI_HOST is not set
> +# CONFIG_PCIE_LAYERSCAPE_GEN4 is not set
> +# CONFIG_PCI_ENDPOINT is not set
> +# CONFIG_PCI_ENDPOINT_CONFIGFS is not set
> +# CONFIG_PCI_EPF_TEST is not set
> +CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
> +CONFIG_BRCMSTB_GISB_ARB=y
> +CONFIG_VEXPRESS_CONFIG=y
> +# CONFIG_HISILICON_LPC is not set
> +# CONFIG_TEGRA_ACONNECT is not set
> +# CONFIG_RASPBERRYPI_FIRMWARE is not set
> +# CONFIG_INTEL_STRATIX10_SERVICE is not set
> +# CONFIG_INTEL_STRATIX10_RSU is not set
> +CONFIG_IMX_DSP=y
> +# CONFIG_GNSS is not set
> +# CONFIG_GNSS_MTK_SERIAL is not set
> +CONFIG_MTD_CMDLINE_PARTS=y
> +# CONFIG_MTD_NAND_BRCMNAND is not set
> +CONFIG_MTD_NAND_GPMI_NAND=y
> +# CONFIG_MTD_NAND_MARVELL is not set
> +# CONFIG_MTD_NAND_FSL_IFC is not set
> +# CONFIG_MTD_NAND_QCOM is not set
> +# CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
> +CONFIG_MTD_UBI=y
> +# CONFIG_OF_OVERLAY is not set
> +# CONFIG_BLK_DEV_NVME is not set
> +# CONFIG_PCI_ENDPOINT_TEST is not set
> +CONFIG_RAID_ATTRS=m
> +# CONFIG_SCSI_HISI_SAS_PCI is not set
> +# CONFIG_MEGARAID_SAS is not set
> +# CONFIG_SCSI_MPT3SAS is not set
> +# CONFIG_SCSI_UFS_QCOM is not set
> +# CONFIG_SCSI_UFS_HISI is not set
> +# CONFIG_SCSI_UFS_EXYNOS is not set
> +# CONFIG_SATA_AHCI is not set
> +CONFIG_AHCI_IMX=y
> +# CONFIG_AHCI_BRCM is not set
> +# CONFIG_AHCI_MVEBU is not set
> +# CONFIG_SATA_SIL24 is not set
> +# CONFIG_SATA_RCAR is not set
> +CONFIG_DM_CRYPT=m
> +# CONFIG_B53 is not set
> +# CONFIG_NET_DSA_BCM_SF2 is not set
> +# CONFIG_NET_DSA_MSCC_FELIX is not set
> +# CONFIG_NET_XGENE is not set
> +# CONFIG_ATL1C is not set
> +# CONFIG_SYSTEMPORT is not set
> +# CONFIG_BNX2X is not set
> +# CONFIG_THUNDER_NIC_PF is not set
> +CONFIG_FSL_XGMAC_MDIO=y
> +CONFIG_FSL_ENETC_IERB=y
> +# CONFIG_FSL_FMAN is not set
> +# CONFIG_FSL_DPAA_ETH is not set
> +# CONFIG_FSL_DPAA2_ETH is not set
> +# CONFIG_FSL_ENETC is not set
> +# CONFIG_FSL_ENETC_VF is not set
> +# CONFIG_FSL_ENETC_QOS is not set
> +CONFIG_MVMDIO=y
> +CONFIG_MSCC_OCELOT_SWITCH=m
> +# CONFIG_HNS3 is not set
> +# CONFIG_HNS3_HCLGE is not set
> +# CONFIG_HNS3_ENET is not set
> +# CONFIG_E1000 is not set
> +# CONFIG_E1000E is not set
> +# CONFIG_IGB is not set
> +# CONFIG_IGBVF is not set
> +# CONFIG_MVNETA is not set
> +# CONFIG_MVPP2 is not set
> +# CONFIG_SKY2 is not set
> +# CONFIG_MLX4_EN is not set
> +# CONFIG_MLX5_CORE is not set
> +# CONFIG_MLX5_CORE_EN is not set
> +# CONFIG_R8169 is not set
> +# CONFIG_SH_ETH is not set
> +# CONFIG_RAVB is not set
> +CONFIG_STMMAC_ETH=y
> +CONFIG_STMMAC_PLATFORM=y
> +CONFIG_DWMAC_GENERIC=m
> +CONFIG_DWMAC_IMX8=y
> +# CONFIG_BROADCOM_PHY is not set
> +CONFIG_MICROCHIP_PHY=y
> +CONFIG_NXP_TJA11XX_PHY=y
> +# CONFIG_SNI_AVE is not set
> +# CONFIG_SNI_NETSEC is not set
> +# CONFIG_TI_K3_AM65_CPSW_NUSS is not set
> +# CONFIG_QCOM_IPA is not set
> +# CONFIG_MESON_GXL_PHY is not set
> +# CONFIG_AQUANTIA_PHY is not set
> +# CONFIG_BCM54140_PHY is not set
> +# CONFIG_MARVELL_PHY is not set
> +# CONFIG_MARVELL_10G_PHY is not set
> +# CONFIG_MICREL_PHY is not set
> +# CONFIG_MICROSEMI_PHY is not set
> +# CONFIG_AT803X_PHY is not set
> +CONFIG_MDIO_BITBANG=y
> +# CONFIG_ROCKCHIP_PHY is not set
> +# CONFIG_DP83867_PHY is not set
> +# CONFIG_VITESSE_PHY is not set
> +# CONFIG_USB_BRCMSTB is not set
> +CONFIG_USB_RTL8152=y
> +CONFIG_USB_USBNET=y
> +CONFIG_USB_NET_AX8817X=y
> +CONFIG_USB_NET_AX88179_178A=y
> +CONFIG_USB_NET_CDC_NCM=y
> +CONFIG_USB_NET_NET1080=y
> +CONFIG_USB_NET_CDC_SUBSET=y
> +CONFIG_USB_NET_ZAURUS=y
> +CONFIG_BRCMFMAC=y
> +CONFIG_HOSTAP=y
> +CONFIG_RTL_CARDS=y
> +# CONFIG_ATH10K is not set
> +# CONFIG_ATH10K_PCI is not set
> +# CONFIG_ATH10K_SNOC is not set
> +# CONFIG_WCN36XX is not set
> +# CONFIG_MWIFIEX is not set
> +# CONFIG_MWIFIEX_SDIO is not set
> +# CONFIG_MWIFIEX_PCIE is not set
> +CONFIG_KEYBOARD_SNVS_PWRKEY=y
> +# CONFIG_KEYBOARD_IMX_SC_KEY is not set
> +# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set
> +# CONFIG_INPUT_PM8941_PWRKEY is not set
> +# CONFIG_INPUT_PM8XXX_VIBRATOR is not set
> +# CONFIG_INPUT_PWM_BEEPER is not set
> +# CONFIG_INPUT_PWM_VIBRA is not set
> +# CONFIG_INPUT_HISI_POWERKEY is not set
> +# CONFIG_VT_HW_CONSOLE_BINDING is not set
> +# CONFIG_SERIAL_8250_BCM2835AUX is not set
> +# CONFIG_SERIAL_8250_OMAP is not set
> +# CONFIG_SERIAL_8250_MT6577 is not set
> +# CONFIG_SERIAL_8250_UNIPHIER is not set
> +# CONFIG_SERIAL_MESON is not set
> +# CONFIG_SERIAL_MESON_CONSOLE is not set
> +# CONFIG_SERIAL_SAMSUNG is not set
> +# CONFIG_SERIAL_SAMSUNG_CONSOLE is not set
> +# CONFIG_SERIAL_TEGRA is not set
> +# CONFIG_SERIAL_TEGRA_TCU is not set
> +# CONFIG_SERIAL_SH_SCI is not set
> +# CONFIG_SERIAL_MSM is not set
> +# CONFIG_SERIAL_MSM_CONSOLE is not set
> +# CONFIG_SERIAL_QCOM_GENI is not set
> +# CONFIG_SERIAL_QCOM_GENI_CONSOLE is not set
> +# CONFIG_SERIAL_MVEBU_UART is not set
> +# CONFIG_SERIAL_OWL is not set
> +# CONFIG_I2C_MUX is not set
> +# CONFIG_I2C_BCM2835 is not set
> +# CONFIG_I2C_MESON is not set
> +# CONFIG_I2C_MT65XX is not set
> +# CONFIG_I2C_MV64XXX is not set
> +# CONFIG_I2C_OMAP is not set
> +# CONFIG_I2C_OWL is not set
> +# CONFIG_I2C_PXA is not set
> +# CONFIG_I2C_QCOM_CCI is not set
> +# CONFIG_I2C_QCOM_GENI is not set
> +# CONFIG_I2C_QUP is not set
> +# CONFIG_I2C_RIIC is not set
> +# CONFIG_I2C_S3C2410 is not set
> +# CONFIG_I2C_SH_MOBILE is not set
> +# CONFIG_I2C_TEGRA is not set
> +# CONFIG_I2C_UNIPHIER_F is not set
> +# CONFIG_I2C_RCAR is not set
> +# CONFIG_SPI_ARMADA_3700 is not set
> +# CONFIG_SPI_BCM2835 is not set
> +# CONFIG_SPI_BCM2835AUX is not set
> +# CONFIG_SPI_DESIGNWARE is not set
> +# CONFIG_SPI_DW_DMA is not set
> +# CONFIG_SPI_DW_MMIO is not set
> +CONFIG_SPI_IMX=y
> +# CONFIG_SPI_FSL_DSPI is not set
> +# CONFIG_SPI_MESON_SPICC is not set
> +# CONFIG_SPI_MESON_SPIFC is not set
> +# CONFIG_SPI_ORION is not set
> +CONFIG_SPI_SPIDEV=y
> +CONFIG_SPI_SLAVE=y
> +CONFIG_SPI_SLAVE_TIME=y
> +CONFIG_SPI_SLAVE_SYSTEM_CONTROL=y
> +CONFIG_PINCTRL=y
> +# CONFIG_SPI_RPCIF is not set
> +# CONFIG_SPI_RSPI is not set
> +# CONFIG_SPI_QCOM_QSPI is not set
> +# CONFIG_SPI_QUP is not set
> +# CONFIG_SPI_QCOM_GENI is not set
> +# CONFIG_SPI_S3C64XX is not set
> +# CONFIG_SPI_SH_MSIOF is not set
> +# CONFIG_SPI_SUN6I is not set
> +# CONFIG_SPMI is not set
> +# CONFIG_PINCTRL_OWL is not set
> +# CONFIG_PINCTRL_S700 is not set
> +# CONFIG_PINCTRL_S900 is not set
> +CONFIG_GPIOLIB=y
> +# CONFIG_PINCTRL_MSM is not set
> +# CONFIG_PINCTRL_IPQ8074 is not set
> +# CONFIG_PINCTRL_IPQ6018 is not set
> +# CONFIG_PINCTRL_MSM8916 is not set
> +# CONFIG_PINCTRL_MSM8994 is not set
> +# CONFIG_PINCTRL_MSM8996 is not set
> +# CONFIG_PINCTRL_MSM8998 is not set
> +# CONFIG_PINCTRL_QCS404 is not set
> +# CONFIG_PINCTRL_QDF2XXX is not set
> +# CONFIG_PINCTRL_QCOM_SPMI_PMIC is not set
> +# CONFIG_PINCTRL_SC7180 is not set
> +# CONFIG_PINCTRL_SC7280 is not set
> +# CONFIG_PINCTRL_SDM845 is not set
> +# CONFIG_PINCTRL_SM8150 is not set
> +# CONFIG_PINCTRL_SM8250 is not set
> +# CONFIG_PINCTRL_SM8350 is not set
> +# CONFIG_PINCTRL_SM8450 is not set
> +# CONFIG_PINCTRL_LPASS_LPI is not set
> +# CONFIG_GPIO_DAVINCI is not set
> +# CONFIG_GPIO_MAX77620 is not set
> +# CONFIG_GPIO_MPC8XXX is not set
> +# CONFIG_GPIO_RCAR is not set
> +# CONFIG_GPIO_UNIPHIER is not set
> +# CONFIG_GPIO_VISCONTI is not set
> +# CONFIG_GPIO_XGENE_SB is not set
> +# CONFIG_GPIO_SL28CPLD is not set
> +CONFIG_POWER_RESET_BRCMSTB=y
> +# CONFIG_POWER_RESET_MSM is not set
> +# CONFIG_POWER_RESET_QCOM_PON is not set
> +# CONFIG_BATTERY_MAX17042 is not set
> +# CONFIG_CHARGER_BQ25890 is not set
> +# CONFIG_CHARGER_BQ25980 is not set
> +# CONFIG_SENSORS_JC42 is not set
> +# CONFIG_SENSORS_LM75 is not set
> +# CONFIG_SENSORS_RASPBERRYPI_HWMON is not set
> +# CONFIG_SENSORS_SL28CPLD is not set
> +CONFIG_THERMAL_WRITABLE_TRIPS=y
> +CONFIG_IMX_SC_THERMAL=y
> +CONFIG_IMX8MM_THERMAL=y
> +CONFIG_QORIQ_THERMAL=y
> +# CONFIG_SUN8I_THERMAL is not set
> +# CONFIG_ROCKCHIP_THERMAL is not set
> +# CONFIG_RCAR_THERMAL is not set
> +# CONFIG_RCAR_GEN3_THERMAL is not set
> +# CONFIG_RZG2L_THERMAL is not set
> +# CONFIG_ARMADA_THERMAL is not set
> +# CONFIG_BCM2711_THERMAL is not set
> +# CONFIG_BCM2835_THERMAL is not set
> +# CONFIG_BRCMSTB_THERMAL is not set
> +# CONFIG_EXYNOS_THERMAL is not set
> +# CONFIG_TEGRA_SOCTHERM is not set
> +# CONFIG_TEGRA_BPMP_THERMAL is not set
> +# CONFIG_QCOM_TSENS is not set
> +# CONFIG_QCOM_SPMI_TEMP_ALARM is not set
> +# CONFIG_QCOM_LMH is not set
> +# CONFIG_UNIPHIER_THERMAL is not set
> +# CONFIG_SL28CPLD_WATCHDOG is not set
> +# CONFIG_S3C2410_WATCHDOG is not set
> +# CONFIG_BCM7038_WDT is not set
> +# CONFIG_SUNXI_WATCHDOG is not set
> +CONFIG_IMX_SC_WDT=y
> +CONFIG_IMX7ULP_WDT=y
> +# CONFIG_QCOM_WDT is not set
> +# CONFIG_MESON_GXBB_WATCHDOG is not set
> +# CONFIG_MESON_WATCHDOG is not set
> +# CONFIG_RENESAS_WDT is not set
> +# CONFIG_RENESAS_RZG2LWDT is not set
> +# CONFIG_UNIPHIER_WATCHDOG is not set
> +# CONFIG_BCM2835_WDT is not set
> +# CONFIG_MFD_ALTERA_SYSMGR is not set
> +# CONFIG_MFD_AXP20X_RSB is not set
> +# CONFIG_MFD_EXYNOS_LPASS is not set
> +# CONFIG_MFD_HI655X_PMIC is not set
> +# CONFIG_MFD_MT6397 is not set
> +# CONFIG_MFD_SIMPLE_MFD_I2C is not set
> +# CONFIG_MFD_SPMI_PMIC is not set
> +# CONFIG_MFD_SL28CPLD is not set
> +CONFIG_REGULATOR=y
> +# CONFIG_REGULATOR_HI655X is not set
> +# CONFIG_REGULATOR_MP8859 is not set
> +# CONFIG_REGULATOR_MT6358 is not set
> +# CONFIG_REGULATOR_MT6397 is not set
> +# CONFIG_REGULATOR_PF8X00 is not set
> +# CONFIG_REGULATOR_QCOM_RPMH is not set
> +# CONFIG_REGULATOR_QCOM_SMD_RPM is not set
> +# CONFIG_REGULATOR_QCOM_SPMI is not set
> +# CONFIG_REGULATOR_TPS65132 is not set
> +CONFIG_MEDIA_SUPPORT=y
> +# CONFIG_RC_CORE is not set
> +# CONFIG_RC_DECODERS is not set
> +# CONFIG_RC_DEVICES is not set
> +# CONFIG_IR_MESON is not set
> +# CONFIG_IR_SUNXI is not set
> +CONFIG_SDR_PLATFORM_DRIVERS=y
> +# CONFIG_VIDEO_QCOM_CAMSS is not set
> +# CONFIG_VIDEO_RCAR_CSI2 is not set
> +# CONFIG_VIDEO_RCAR_VIN is not set
> +# CONFIG_VIDEO_SUN6I_CSI is not set
> +# CONFIG_VIDEO_RCAR_ISP is not set
> +# CONFIG_VIDEO_SAMSUNG_S5P_JPEG is not set
> +# CONFIG_VIDEO_SAMSUNG_S5P_MFC is not set
> +# CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC is not set
> +# CONFIG_VIDEO_RENESAS_FDP1 is not set
> +# CONFIG_VIDEO_RENESAS_FCP is not set
> +# CONFIG_VIDEO_RENESAS_VSP1 is not set
> +# CONFIG_VIDEO_QCOM_VENUS is not set
> +# CONFIG_VIDEO_RCAR_DRIF is not set
> +CONFIG_VIDEO_OV5640=y
> +CONFIG_DRM=y
> +CONFIG_DRM_I2C_CH7006=m
> +CONFIG_DRM_I2C_SIL164=m
> +# CONFIG_DRM_NOUVEAU is not set
> +# CONFIG_DRM_EXYNOS is not set
> +# CONFIG_DRM_EXYNOS5433_DECON is not set
> +# CONFIG_DRM_EXYNOS7_DECON is not set
> +# CONFIG_DRM_EXYNOS_DSI is not set
> +# CONFIG_DRM_EXYNOS_DP is not set
> +# CONFIG_DRM_EXYNOS_HDMI is not set
> +# CONFIG_DRM_EXYNOS_MIC is not set
> +# CONFIG_DRM_ROCKCHIP is not set
> +# CONFIG_ROCKCHIP_ANALOGIX_DP is not set
> +# CONFIG_ROCKCHIP_CDN_DP is not set
> +# CONFIG_ROCKCHIP_DW_HDMI is not set
> +# CONFIG_ROCKCHIP_DW_MIPI_DSI is not set
> +# CONFIG_ROCKCHIP_INNO_HDMI is not set
> +# CONFIG_ROCKCHIP_LVDS is not set
> +# CONFIG_DRM_RCAR_DU is not set
> +# CONFIG_DRM_RCAR_USE_LVDS is not set
> +# CONFIG_DRM_RCAR_MIPI_DSI is not set
> +# CONFIG_DRM_SUN4I is not set
> +# CONFIG_DRM_SUN6I_DSI is not set
> +# CONFIG_DRM_SUN8I_DW_HDMI is not set
> +# CONFIG_DRM_SUN8I_MIXER is not set
> +# CONFIG_DRM_MSM is not set
> +# CONFIG_DRM_TEGRA is not set
> +# CONFIG_DRM_PANEL_BOE_TV101WUM_NL6 is not set
> +# CONFIG_DRM_PANEL_LVDS is not set
> +# CONFIG_DRM_PANEL_SIMPLE is not set
> +# CONFIG_DRM_PANEL_EDP is not set
> +# CONFIG_DRM_PANEL_MANTIX_MLAF057WE51 is not set
> +# CONFIG_DRM_PANEL_RAYDIUM_RM67191 is not set
> +# CONFIG_DRM_PANEL_SITRONIX_ST7703 is not set
> +CONFIG_DRM_DISPLAY_CONNECTOR=m
> +# CONFIG_DRM_LONTIUM_LT8912B is not set
> +CONFIG_DRM_NWL_MIPI_DSI=y
> +# CONFIG_DRM_LONTIUM_LT9611UXC is not set
> +# CONFIG_DRM_PARADE_PS8640 is not set
> +CONFIG_DRM_I2C_ADV7511=y
> +CONFIG_DRM_DW_HDMI_I2S_AUDIO=m
> +CONFIG_DRM_IMX_DCSS=y
> +# CONFIG_DRM_VC4 is not set
> +# CONFIG_DRM_HISI_HIBMC is not set
> +CONFIG_DRM_MXSFB=y
> +# CONFIG_DRM_MEDIATEK is not set
> +# CONFIG_DRM_MEDIATEK_HDMI is not set
> +# CONFIG_DRM_MESON is not set
> +CONFIG_DRM_LEGACY=y
> +# CONFIG_FB is not set
> +# CONFIG_FB_MODE_HELPERS is not set
> +# CONFIG_FB_EFI is not set
> +# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
> +# CONFIG_BACKLIGHT_PWM is not set
> +# CONFIG_BACKLIGHT_LP855X is not set
> +# CONFIG_LOGO is not set
> +# CONFIG_SND_SPI is not set
> +# CONFIG_SND_USB is not set
> +CONFIG_SND_DYNAMIC_MINORS=y
> +CONFIG_SND_ALOOP=m
> +# CONFIG_SND_HDA_TEGRA is not set
> +# CONFIG_SND_HDA_CODEC_HDMI is not set
> +CONFIG_SND_SOC_FSL_ASRC=y
> +# CONFIG_SND_SOC_FSL_AUDMIX is not set
> +# CONFIG_SND_SOC_FSL_SPDIF is not set
> +CONFIG_SND_SOC_FSL_EASRC=y
> +CONFIG_SND_IMX_SOC=y
> +CONFIG_SND_SOC_FSL_ASOC_CARD=y
> +CONFIG_SND_SOC_SOF_TOPLEVEL=y
> +CONFIG_SND_SOC_SOF_OF=m
> +CONFIG_SND_SOC_SOF_IMX_TOPLEVEL=y
> +CONFIG_SND_SOC_AK4458=y
> +CONFIG_SND_SOC_AK5558=y
> +CONFIG_SND_SOC_PCM512x_I2C=y
> +CONFIG_SND_SIMPLE_CARD=y
> +CONFIG_SND_AUDIO_GRAPH_CARD=y
> +CONFIG_USB_CONN_GPIO=y
> +# CONFIG_SND_BCM2835_SOC_I2S is not set
> +# CONFIG_SND_SOC_CROS_EC_CODEC is not set
> +# CONFIG_SND_SOC_DMIC is not set
> +# CONFIG_SND_SOC_FSL_MICFIL is not set
> +# CONFIG_SND_SOC_IMX_SGTL5000 is not set
> +# CONFIG_SND_SOC_IMX_SPDIF is not set
> +# CONFIG_SND_SOC_IMX_AUDMIX is not set
> +# CONFIG_SND_MESON_AXG_SOUND_CARD is not set
> +# CONFIG_SND_MESON_GX_SOUND_CARD is not set
> +# CONFIG_SND_SOC_QCOM is not set
> +# CONFIG_SND_SOC_APQ8016_SBC is not set
> +# CONFIG_SND_SOC_MSM8996 is not set
> +# CONFIG_SND_SOC_MAX98357A is not set
> +# CONFIG_SND_SOC_MAX98927 is not set
> +# CONFIG_SND_SOC_SDM845 is not set
> +# CONFIG_SND_SOC_SM8250 is not set
> +# CONFIG_SND_SOC_ROCKCHIP is not set
> +# CONFIG_SND_SOC_ROCKCHIP_SPDIF is not set
> +# CONFIG_SND_SOC_ROCKCHIP_RT5645 is not set
> +# CONFIG_SND_SOC_RK3399_GRU_SOUND is not set
> +# CONFIG_SND_SOC_SAMSUNG is not set
> +# CONFIG_SND_SOC_RCAR is not set
> +# CONFIG_SND_SOC_RZ is not set
> +# CONFIG_SND_SOC_SGTL5000 is not set
> +# CONFIG_SND_SOC_SPDIF is not set
> +# CONFIG_SND_SUN4I_I2S is not set
> +# CONFIG_SND_SUN4I_SPDIF is not set
> +# CONFIG_SND_SOC_TEGRA is not set
> +# CONFIG_SND_SOC_TEGRA210_AHUB is not set
> +# CONFIG_SND_SOC_TEGRA210_DMIC is not set
> +# CONFIG_SND_SOC_TEGRA210_I2S is not set
> +# CONFIG_SND_SOC_TEGRA186_DSPK is not set
> +# CONFIG_SND_SOC_TEGRA210_ADMAIF is not set
> +# CONFIG_SND_SOC_TEGRA210_MVC is not set
> +# CONFIG_SND_SOC_TEGRA210_SFC is not set
> +# CONFIG_SND_SOC_TEGRA210_AMX is not set
> +# CONFIG_SND_SOC_TEGRA210_ADX is not set
> +# CONFIG_SND_SOC_TEGRA210_MIXER is not set
> +# CONFIG_SND_SOC_TEGRA_AUDIO_GRAPH_CARD is not set
> +# CONFIG_SND_SOC_AK4613 is not set
> +# CONFIG_SND_SOC_ES7134 is not set
> +# CONFIG_SND_SOC_ES7241 is not set
> +# CONFIG_SND_SOC_GTM601 is not set
> +# CONFIG_SND_SOC_MSM8916_WCD_ANALOG is not set
> +# CONFIG_SND_SOC_MSM8916_WCD_DIGITAL is not set
> +# CONFIG_SND_SOC_PCM3168A_I2C is not set
> +# CONFIG_SND_SOC_RT5659 is not set
> +# CONFIG_SND_SOC_SIMPLE_AMPLIFIER is not set
> +# CONFIG_SND_SOC_SIMPLE_MUX is not set
> +# CONFIG_SND_SOC_TAS571X is not set
> +# CONFIG_SND_SOC_TLV320AIC32X4_I2C is not set
> +# CONFIG_SND_SOC_WCD934X is not set
> +# CONFIG_SND_SOC_WM8904 is not set
> +# CONFIG_SND_SOC_WM8960 is not set
> +# CONFIG_SND_SOC_WM8962 is not set
> +# CONFIG_SND_SOC_WM8978 is not set
> +# CONFIG_SND_SOC_WSA881X is not set
> +# CONFIG_SND_SOC_NAU8822 is not set
> +# CONFIG_SND_SOC_LPASS_WSA_MACRO is not set
> +# CONFIG_SND_SOC_LPASS_VA_MACRO is not set
> +# CONFIG_SND_AUDIO_GRAPH_CARD2 is not set
> +# CONFIG_HID_MULTITOUCH is not set
> +# CONFIG_I2C_HID_ACPI is not set
> +# CONFIG_I2C_HID_OF is not set
> +# CONFIG_USB_XHCI_PCI_RENESAS is not set
> +# CONFIG_USB_XHCI_TEGRA is not set
> +# CONFIG_USB_EHCI_EXYNOS is not set
> +# CONFIG_USB_OHCI_EXYNOS is not set
> +CONFIG_USB_HCD_TEST_MODE=y
> +# CONFIG_USB_RENESAS_USBHS_HCD is not set
> +# CONFIG_USB_RENESAS_USBHS is not set
> +CONFIG_USB_UAS=y
> +# CONFIG_USB_CDNS_SUPPORT is not set
> +# CONFIG_USB_CDNS3 is not set
> +# CONFIG_USB_CDNS3_GADGET is not set
> +# CONFIG_USB_CDNS3_HOST is not set
> +# CONFIG_USB_MTU3 is not set
> +# CONFIG_USB_MUSB_SUNXI is not set
> +CONFIG_USB_SERIAL=y
> +CONFIG_USB_SERIAL_CONSOLE=y
> +CONFIG_USB_SERIAL_GENERIC=y
> +CONFIG_USB_SERIAL_SIMPLE=y
> +CONFIG_USB_SERIAL_FTDI_SIO=y
> +CONFIG_USB_TEST=m
> +CONFIG_USB_EHSET_TEST_FIXTURE=y
> +# CONFIG_USB_SERIAL_CP210X is not set
> +# CONFIG_USB_SERIAL_OPTION is not set
> +CONFIG_USB_MXS_PHY=y
> +# CONFIG_REALTEK_PHY is not set
> +CONFIG_USB_ULPI=y
> +CONFIG_USB_SNP_UDC_PLAT=y
> +CONFIG_USB_BDC_UDC=y
> +CONFIG_USB_CONFIGFS=y
> +# CONFIG_USB_RENESAS_USBHS_UDC is not set
> +# CONFIG_USB_RENESAS_USB3 is not set
> +# CONFIG_USB_TEGRA_XUDC is not set
> +CONFIG_USB_CONFIGFS_F_LB_SS=y
> +CONFIG_USB_CONFIGFS_F_UAC1=y
> +CONFIG_USB_CONFIGFS_F_UAC1_LEGACY=y
> +CONFIG_USB_CONFIGFS_F_UAC2=y
> +CONFIG_USB_CONFIGFS_F_MIDI=y
> +CONFIG_USB_CONFIGFS_F_HID=y
> +CONFIG_USB_CONFIGFS_F_UVC=y
> +CONFIG_USB_ZERO=m
> +CONFIG_USB_AUDIO=m
> +CONFIG_USB_ETH=m
> +CONFIG_USB_MASS_STORAGE=m
> +CONFIG_USB_G_SERIAL=m
> +CONFIG_TYPEC=y
> +CONFIG_TYPEC_TCPM=y
> +CONFIG_TYPEC_TCPCI=y
> +# CONFIG_TYPEC_TPS6598X is not set
> +# CONFIG_MMC_SDHCI_ACPI is not set
> +# CONFIG_MMC_SDHCI_TEGRA is not set
> +# CONFIG_MMC_MESON_GX is not set
> +# CONFIG_MMC_SDHCI_MSM is not set
> +# CONFIG_MMC_SDHI is not set
> +# CONFIG_MMC_UNIPHIER is not set
> +# CONFIG_MMC_DW_ROCKCHIP is not set
> +# CONFIG_MMC_SUNXI is not set
> +# CONFIG_MMC_BCM2835 is not set
> +# CONFIG_MMC_MTK is not set
> +# CONFIG_MMC_OWL is not set
> +# CONFIG_LEDS_LM3692X is not set
> +# CONFIG_LEDS_PCA9532 is not set
> +# CONFIG_EDAC_LAYERSCAPE is not set
> +# CONFIG_RTC_DRV_HYM8563 is not set
> +# CONFIG_RTC_DRV_PCF85063 is not set
> +# CONFIG_RTC_DRV_M41T80 is not set
> +# CONFIG_RTC_DRV_RV3028 is not set
> +# CONFIG_RTC_DRV_FSL_FTM_ALARM is not set
> +# CONFIG_RTC_DRV_S3C is not set
> +CONFIG_RTC_DRV_SNVS=y
> +CONFIG_RTC_DRV_IMX_SC=y
> +# CONFIG_RTC_DRV_SUN6I is not set
> +# CONFIG_RTC_DRV_ARMADA38X is not set
> +# CONFIG_RTC_DRV_PM8XXX is not set
> +# CONFIG_RTC_DRV_TEGRA is not set
> +# CONFIG_RTC_DRV_XGENE is not set
> +# CONFIG_RTC_DRV_MT6397 is not set
> +CONFIG_BCM_SBA_RAID=m
> +# CONFIG_DMA_BCM2835 is not set
> +# CONFIG_DMA_SUN6I is not set
> +CONFIG_FSL_QDMA=m
> +CONFIG_IMX_SDMA=y
> +# CONFIG_K3_DMA is not set
> +# CONFIG_MV_XOR is not set
> +CONFIG_MXS_DMA=y
> +# CONFIG_OWL_DMA is not set
> +# CONFIG_TEGRA186_GPC_DMA is not set
> +# CONFIG_TEGRA20_APB_DMA is not set
> +# CONFIG_TEGRA210_ADMA is not set
> +# CONFIG_QCOM_BAM_DMA is not set
> +CONFIG_DMATEST=y
> +CONFIG_DMABUF_HEAPS=y
> +CONFIG_DMABUF_HEAPS_SYSTEM=y
> +CONFIG_DMABUF_HEAPS_CMA=y
> +# CONFIG_RCAR_DMAC is not set
> +# CONFIG_RENESAS_USB_DMAC is not set
> +# CONFIG_RZ_DMAC is not set
> +# CONFIG_TI_K3_UDMA is not set
> +# CONFIG_TI_K3_UDMA_GLUE_LAYER is not set
> +# CONFIG_VFIO_PCI is not set
> +# CONFIG_VIRTIO_PCI is not set
> +# CONFIG_XEN_GNTDEV is not set
> +# CONFIG_XEN_GRANT_DEV_ALLOC is not set
> +# CONFIG_VIDEO_HANTRO is not set
> +# CONFIG_VIDEO_IMX_MEDIA is not set
> +CONFIG_CROS_EC_TYPEC=y
> +# CONFIG_CLK_VEXPRESS_OSC is not set
> +# CONFIG_COMMON_CLK_SCMI is not set
> +# CONFIG_COMMON_CLK_FSL_SAI is not set
> +CONFIG_COMMON_CLK_XGENE=y
> +# CONFIG_COMMON_CLK_BD718XX is not set
> +# CONFIG_CLK_RASPBERRYPI is not set
> +# CONFIG_CLK_IMX8MM is not set
> +# CONFIG_CLK_IMX8MP is not set
> +# CONFIG_CLK_IMX8MQ is not set
> +# CONFIG_CLK_IMX8QXP is not set
> +# CONFIG_CLK_IMX8ULP is not set
> +# CONFIG_TI_SCI_CLK is not set
> +# CONFIG_COMMON_CLK_QCOM is not set
> +# CONFIG_QCOM_A53PLL is not set
> +# CONFIG_QCOM_CLK_APCS_MSM8916 is not set
> +# CONFIG_QCOM_CLK_APCC_MSM8996 is not set
> +# CONFIG_QCOM_CLK_SMD_RPM is not set
> +# CONFIG_QCOM_CLK_RPMH is not set
> +# CONFIG_IPQ_GCC_6018 is not set
> +# CONFIG_IPQ_GCC_8074 is not set
> +# CONFIG_MSM_GCC_8916 is not set
> +# CONFIG_MSM_GCC_8994 is not set
> +# CONFIG_MSM_MMCC_8996 is not set
> +# CONFIG_MSM_GCC_8998 is not set
> +# CONFIG_QCS_GCC_404 is not set
> +# CONFIG_SC_GCC_7180 is not set
> +# CONFIG_SC_GCC_7280 is not set
> +# CONFIG_SDM_CAMCC_845 is not set
> +# CONFIG_SDM_GPUCC_845 is not set
> +# CONFIG_SDM_VIDEOCC_845 is not set
> +# CONFIG_SDM_DISPCC_845 is not set
> +# CONFIG_SM_GCC_8350 is not set
> +# CONFIG_SM_GCC_8450 is not set
> +# CONFIG_SM_GPUCC_8150 is not set
> +# CONFIG_SM_GPUCC_8250 is not set
> +# CONFIG_QCOM_HFPLL is not set
> +# CONFIG_CLK_GFM_LPASS_SM8250 is not set
> +# CONFIG_CLK_RCAR_USB2_CLOCK_SEL is not set
> +# CONFIG_HWSPINLOCK_QCOM is not set
> +# CONFIG_RENESAS_OSTM is not set
> +# CONFIG_BCM2835_MBOX is not set
> +# CONFIG_QCOM_APCS_IPC is not set
> +# CONFIG_QCOM_IPCC is not set
> +# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set
> +# CONFIG_ROCKCHIP_IOMMU is not set
> +# CONFIG_TEGRA_IOMMU_SMMU is not set
> +# CONFIG_MTK_IOMMU is not set
> +# CONFIG_QCOM_IOMMU is not set
> +CONFIG_IMX_REMOTEPROC=y
> +CONFIG_IMX_DSP_REMOTEPROC=y
> +CONFIG_RPMSG_CHAR=y
> +# CONFIG_QCOM_Q6V5_MSS is not set
> +# CONFIG_QCOM_Q6V5_PAS is not set
> +# CONFIG_QCOM_SYSMON is not set
> +# CONFIG_QCOM_WCNSS_PIL is not set
> +# CONFIG_RPMSG_QCOM_GLINK_SMEM is not set
> +# CONFIG_RPMSG_QCOM_SMD is not set
> +CONFIG_SOC_BRCMSTB=y
> +# CONFIG_OWL_PM_DOMAINS is not set
> +# CONFIG_RASPBERRYPI_POWER is not set
> +# CONFIG_FSL_DPAA is not set
> +# CONFIG_FSL_MC_DPIO is not set
> +CONFIG_SOC_TI=y
> +# CONFIG_DEVFREQ_GOV_USERSPACE is not set
> +# CONFIG_MTK_DEVAPC is not set
> +# CONFIG_MTK_PMIC_WRAP is not set
> +# CONFIG_QCOM_AOSS_QMP is not set
> +# CONFIG_QCOM_COMMAND_DB is not set
> +# CONFIG_QCOM_CPR is not set
> +# CONFIG_QCOM_GENI_SE is not set
> +# CONFIG_QCOM_RMTFS_MEM is not set
> +# CONFIG_QCOM_RPMH is not set
> +# CONFIG_QCOM_RPMHPD is not set
> +# CONFIG_QCOM_RPMPD is not set
> +# CONFIG_QCOM_SMEM is not set
> +# CONFIG_QCOM_SMD_RPM is not set
> +# CONFIG_QCOM_SMP2P is not set
> +# CONFIG_QCOM_SMSM is not set
> +# CONFIG_QCOM_SOCINFO is not set
> +# CONFIG_QCOM_STATS is not set
> +# CONFIG_QCOM_WCNSS_CTRL is not set
> +# CONFIG_QCOM_APR is not set
> +# CONFIG_ARCH_R8A77995 is not set
> +# CONFIG_ARCH_R8A77990 is not set
> +# CONFIG_ARCH_R8A77950 is not set
> +# CONFIG_ARCH_R8A77951 is not set
> +# CONFIG_ARCH_R8A77965 is not set
> +# CONFIG_ARCH_R8A77960 is not set
> +# CONFIG_ARCH_R8A77961 is not set
> +# CONFIG_ARCH_R8A779F0 is not set
> +# CONFIG_ARCH_R8A77980 is not set
> +# CONFIG_ARCH_R8A77970 is not set
> +# CONFIG_ARCH_R8A779A0 is not set
> +# CONFIG_ARCH_R8A774C0 is not set
> +# CONFIG_ARCH_R8A774E1 is not set
> +# CONFIG_ARCH_R8A774A1 is not set
> +# CONFIG_ARCH_R8A774B1 is not set
> +# CONFIG_ARCH_R9A07G044 is not set
> +# CONFIG_ROCKCHIP_IODOMAIN is not set
> +# CONFIG_ROCKCHIP_PM_DOMAINS is not set
> +# CONFIG_ARCH_TEGRA_132_SOC is not set
> +# CONFIG_ARCH_TEGRA_210_SOC is not set
> +# CONFIG_ARCH_TEGRA_186_SOC is not set
> +# CONFIG_ARCH_TEGRA_194_SOC is not set
> +# CONFIG_ARCH_TEGRA_234_SOC is not set
> +# CONFIG_TI_SCI_PM_DOMAINS is not set
> +# CONFIG_ARM_IMX_BUS_DEVFREQ is not set
> +# CONFIG_ARM_IMX8M_DDRC_DEVFREQ is not set
> +CONFIG_MEMORY=y
> +# CONFIG_RENESAS_RPCIF is not set
> +CONFIG_IMX8QXP_ADC=y
> +# CONFIG_EXYNOS_ADC is not set
> +# CONFIG_QCOM_SPMI_VADC is not set
> +# CONFIG_QCOM_SPMI_ADC5 is not set
> +# CONFIG_ROCKCHIP_SARADC is not set
> +# CONFIG_RZG2L_ADC is not set
> +# CONFIG_TI_ADS1015 is not set
> +CONFIG_IIO_ST_LSM6DSX=y
> +# CONFIG_SENSORS_ISL29018 is not set
> +# CONFIG_VCNL4000 is not set
> +# CONFIG_IIO_ST_MAGN_3AXIS is not set
> +# CONFIG_MPL3115 is not set
> +# CONFIG_PWM_BCM2835 is not set
> +# CONFIG_PWM_BRCMSTB is not set
> +CONFIG_PWM_FSL_FTM=m
> +CONFIG_PWM_IMX27=y
> +# CONFIG_PWM_MESON is not set
> +# CONFIG_PWM_MTK_DISP is not set
> +# CONFIG_PWM_MEDIATEK is not set
> +# CONFIG_PWM_RCAR is not set
> +# CONFIG_PWM_RENESAS_TPU is not set
> +# CONFIG_PWM_ROCKCHIP is not set
> +# CONFIG_PWM_SAMSUNG is not set
> +# CONFIG_PWM_SL28CPLD is not set
> +# CONFIG_PWM_SUN4I is not set
> +# CONFIG_PWM_TEGRA is not set
> +# CONFIG_PWM_VISCONTI is not set
> +# CONFIG_SL28CPLD_INTC is not set
> +# CONFIG_QCOM_PDC is not set
> +# CONFIG_RESET_QCOM_AOSS is not set
> +# CONFIG_RESET_QCOM_PDC is not set
> +# CONFIG_RESET_RZG2L_USBPHY_CTRL is not set
> +# CONFIG_RESET_TI_SCI is not set
> +CONFIG_PHY_CADENCE_SALVO=y
> +CONFIG_PHY_MIXEL_MIPI_DPHY=y
> +# CONFIG_PHY_SUN4I_USB is not set
> +# CONFIG_PHY_CADENCE_SIERRA is not set
> +# CONFIG_PHY_FSL_IMX8M_PCIE is not set
> +# CONFIG_PHY_HI6220_USB is not set
> +# CONFIG_PHY_HISTB_COMBPHY is not set
> +# CONFIG_PHY_HISI_INNO_USB2 is not set
> +# CONFIG_PHY_MVEBU_CP110_COMPHY is not set
> +# CONFIG_PHY_MTK_TPHY is not set
> +# CONFIG_PHY_QCOM_QMP is not set
> +# CONFIG_PHY_QCOM_QUSB2 is not set
> +CONFIG_PHY_SAMSUNG_USB2=y
> +# CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2 is not set
> +# CONFIG_PHY_RCAR_GEN3_PCIE is not set
> +# CONFIG_PHY_RCAR_GEN3_USB2 is not set
> +# CONFIG_PHY_RCAR_GEN3_USB3 is not set
> +# CONFIG_PHY_ROCKCHIP_EMMC is not set
> +# CONFIG_PHY_ROCKCHIP_INNO_HDMI is not set
> +# CONFIG_PHY_ROCKCHIP_INNO_USB2 is not set
> +# CONFIG_PHY_ROCKCHIP_INNO_DSIDPHY is not set
> +# CONFIG_PHY_ROCKCHIP_PCIE is not set
> +# CONFIG_PHY_ROCKCHIP_TYPEC is not set
> +# CONFIG_PHY_SAMSUNG_UFS is not set
> +# CONFIG_PHY_UNIPHIER_USB2 is not set
> +# CONFIG_PHY_UNIPHIER_USB3 is not set
> +# CONFIG_PHY_TEGRA_XUSB is not set
> +# CONFIG_PHY_AM654_SERDES is not set
> +# CONFIG_PHY_J721E_WIZ is not set
> +CONFIG_FSL_IMX8_DDR_PMU=y
> +# CONFIG_QCOM_L2_PMU is not set
> +# CONFIG_QCOM_L3_PMU is not set
> +# CONFIG_MTK_EFUSE is not set
> +# CONFIG_QCOM_QFPROM is not set
> +# CONFIG_ROCKCHIP_EFUSE is not set
> +# CONFIG_NVMEM_SUNXI_SID is not set
> +# CONFIG_UNIPHIER_EFUSE is not set
> +# CONFIG_MESON_EFUSE is not set
> +# CONFIG_NVMEM_RMEM is not set
> +# CONFIG_NVMEM_LAYERSCAPE_SFP is not set
> +# CONFIG_FPGA_MGR_ALTERA_CVP is not set
> +# CONFIG_FPGA_MGR_STRATIX10_SOC is not set
> +# CONFIG_SLIM_QCOM_NGD_CTRL is not set
> +# CONFIG_INTERCONNECT_IMX is not set
> +# CONFIG_INTERCONNECT_IMX8MM is not set
> +# CONFIG_INTERCONNECT_IMX8MN is not set
> +# CONFIG_INTERCONNECT_IMX8MQ is not set
> +# CONFIG_INTERCONNECT_QCOM is not set
> +# CONFIG_INTERCONNECT_QCOM_MSM8916 is not set
> +# CONFIG_INTERCONNECT_QCOM_OSM_L3 is not set
> +# CONFIG_INTERCONNECT_QCOM_SC7280 is not set
> +# CONFIG_INTERCONNECT_QCOM_SDM845 is not set
> +# CONFIG_INTERCONNECT_QCOM_SM8150 is not set
> +# CONFIG_INTERCONNECT_QCOM_SM8250 is not set
> +# CONFIG_INTERCONNECT_QCOM_SM8350 is not set
> +# CONFIG_INTERCONNECT_QCOM_SM8450 is not set
> +# CONFIG_TMPFS_POSIX_ACL is not set
> +# CONFIG_TMPFS_XATTR is not set
> +CONFIG_JFFS2_FS=y
> +CONFIG_UBIFS_FS=y
> +CONFIG_SQUASHFS_XZ=y
> +CONFIG_CRYPTO_USER=y
> +CONFIG_CRYPTO_TEST=m
> +CONFIG_CRYPTO_DH=m
> +# CONFIG_CRYPTO_CURVE25519 is not set
> +CONFIG_CRYPTO_CHACHA20POLY1305=m
> +CONFIG_CRYPTO_CFB=m
> +CONFIG_CRYPTO_CTS=m
> +CONFIG_CRYPTO_LRW=m
> +CONFIG_CRYPTO_OFB=m
> +CONFIG_CRYPTO_PCBC=m
> +CONFIG_CRYPTO_XCBC=m
> +CONFIG_CRYPTO_VMAC=m
> +CONFIG_CRYPTO_MD4=m
> +CONFIG_CRYPTO_RMD160=m
> +CONFIG_CRYPTO_STREEBOG=m
> +CONFIG_CRYPTO_WP512=m
> +CONFIG_CRYPTO_ANUBIS=m
> +CONFIG_CRYPTO_ARC4=m
> +CONFIG_CRYPTO_BLOWFISH=m
> +CONFIG_CRYPTO_CAMELLIA=m
> +CONFIG_CRYPTO_CAST5=m
> +CONFIG_CRYPTO_CAST6=m
> +CONFIG_CRYPTO_DES=m
> +CONFIG_CRYPTO_FCRYPT=m
> +CONFIG_CRYPTO_KHAZAD=m
> +CONFIG_CRYPTO_SEED=m
> +CONFIG_CRYPTO_SERPENT=m
> +CONFIG_CRYPTO_TEA=m
> +CONFIG_CRYPTO_TWOFISH=m
> +CONFIG_CRYPTO_USER_API_HASH=m
> +CONFIG_CRYPTO_USER_API_SKCIPHER=m
> +CONFIG_CRYPTO_USER_API_AEAD=m
> +# CONFIG_CRYPTO_DEV_SUN8I_CE is not set
> +# CONFIG_CRYPTO_DEV_FSL_DPAA2_CAAM is not set
> +# CONFIG_CRYPTO_DEV_QCOM_RNG is not set
> +CONFIG_CRYPTO_DEV_AMLOGIC_GXL=m
> +CONFIG_INDIRECT_PIO=y
> +CONFIG_CRC_CCITT=m
> +# CONFIG_CRC8 is not set
> +# CONFIG_CRYPTO_DEV_HISI_SEC2 is not set
> +# CONFIG_CRYPTO_DEV_HISI_ZIP is not set
> +# CONFIG_CRYPTO_DEV_HISI_HPRE is not set
> +# CONFIG_CRYPTO_DEV_HISI_TRNG is not set
> +CONFIG_IRQ_POLL=y
> +# CONFIG_DEBUG_INFO is not set
> +# CONFIG_DEBUG_INFO_REDUCED is not set
> +CONFIG_CORESIGHT=y
> +CONFIG_CORESIGHT_LINK_AND_SINK_TMC=y
> +CONFIG_CORESIGHT_SOURCE_ETM4X=y
This fragment ^^^ must be shrinked with:
$ make savedefconfig
This way it should reduce a lot.
> diff --git a/board/bsh/imx8mn-bsh-smm-s2/nand-full.lst b/board/bsh/imx8mn-bsh-smm-s2/nand-full.lst
> new file mode 100644
> index 000000000000..c01d2d6c1dac
> --- /dev/null
> +++ b/board/bsh/imx8mn-bsh-smm-s2/nand-full.lst
> @@ -0,0 +1,29 @@
> +# @_flash.bin | bootloader
> +# @_image [_flash.bin] | image burn to nand, default is the same as bootloader
> +# @_filesystem | filesystem to burn
> +# @_kernel | kernel image
> +# @_dtb | dtb image
> +
> +# This command will be run when ROM support stream mode
> +# i.MX8QXP, i.MX8QM
> +SDPS: boot -f _flash.bin
> +
> +FB: ucmd setenv fastboot_buffer ${loadaddr}
> +FB: download -f _image
> +# Burn image to nandfit partition if needed
> +FB: ucmd if env exists nandfit_part; then nand erase.part nandfit; nand write ${fastboot_buffer} nandfit ${filesize}; else true; fi;
> +FB: ucmd nandbcb init ${fastboot_buffer} nandboot ${filesize}
> +
> +FB[-t 10000]: ucmd ubi part nandrootfs
> +FB[-t 10000]: ucmd ubi create root -
> +FB: download -f _filesystem
> +FB[-t 60000]: ucmd ubi write ${loadaddr} root ${filesize}
> +
> +FB: download -f _kernel
> +FB[-t 10000]: ucmd nand write ${loadaddr} nandkernel ${filesize}
> +
> +FB: download -f _dtb
> +FB[-t 8000]: ucmd nand write ${loadaddr} nanddtb ${filesize}
> +
> +FB: reboot
> +FB: done
> diff --git a/board/bsh/imx8mn-bsh-smm-s2/patches/linux/0001-dmaengine-mxs-use-platform_driver_register.patch b/board/bsh/imx8mn-bsh-smm-s2/patches/linux/0001-dmaengine-mxs-use-platform_driver_register.patch
> new file mode 100644
> index 000000000000..d19782656210
> --- /dev/null
> +++ b/board/bsh/imx8mn-bsh-smm-s2/patches/linux/0001-dmaengine-mxs-use-platform_driver_register.patch
> @@ -0,0 +1,64 @@
> +From fd270493d83fa97568f605552656f48c932d1237 Mon Sep 17 00:00:00 2001
> +From: Dario Binacchi <dario.binacchi@amarulasolutions.com>
> +Date: Sun, 22 May 2022 17:40:15 +0200
> +Subject: [PATCH 1/2] dmaengine: mxs: use platform_driver_register
> +
> +Driver registration fails on SOC imx8mn as its supplier, the clock
> +control module, is probed later than subsys initcall level. This driver
> +uses platform_driver_probe which is not compatible with deferred probing
> +and won't be probed again later if probe function fails due to clock not
> +being available at that time.
> +
> +This patch replaces the use of platform_driver_probe with
> +platform_driver_register which will allow probing the driver later again
> +when the clock control module will be available.
> +
> +Fixes: a580b8c5429a ("dmaengine: mxs-dma: add dma support for i.MX23/28")
> +Co-developed-by: Michael Trimarchi <michael@amarulasolutions.com>
> +Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
> +Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
> +Cc: stable@vger.kernel.org
Can you please indicate the upstream URL of the pending patch? For
example a Patchwork link?
Also, here you should add 3 dashes to avoid having the version history
to fall into the final commit log.
> +
> +Series-version: 5
> +
> +Series-changes: 5
> +- Update the commit message.
> +- Create a new patch to remove the warning generated by this patch.
> +
> +Series-changes: 4
> +- Restore __init in front of mxs_dma_probe() definition.
> +- Rename the mxs_dma_driver variable to mxs_dma_driver_probe.
> +- Update the commit message.
> +- Use builtin_platform_driver() instead of module_platform_driver().
> +
> +Series-changes: 3
> +- Restore __init in front of mxs_dma_init() definition.
> +
> +Series-changes: 2
> +- Add the tag "Cc: stable@vger.kernel.org" in the sign-off area.
> +
> +Series-cc: linux-amarula@amarulasolutions.com
> +---
> + drivers/dma/mxs-dma.c | 8 ++------
> + 1 file changed, 2 insertions(+), 6 deletions(-)
> +
> +diff --git a/drivers/dma/mxs-dma.c b/drivers/dma/mxs-dma.c
> +index 994fc4d2aca4..18f8154b859b 100644
> +--- a/drivers/dma/mxs-dma.c
> ++++ b/drivers/dma/mxs-dma.c
> +@@ -839,10 +839,6 @@ static struct platform_driver mxs_dma_driver = {
> + .name = "mxs-dma",
> + .of_match_table = mxs_dma_dt_ids,
> + },
> ++ .probe = mxs_dma_probe,
> + };
> +-
> +-static int __init mxs_dma_module_init(void)
> +-{
> +- return platform_driver_probe(&mxs_dma_driver, mxs_dma_probe);
> +-}
> +-subsys_initcall(mxs_dma_module_init);
> ++builtin_platform_driver(mxs_dma_driver);
> +--
> +2.32.0
> +
> diff --git a/board/bsh/imx8mn-bsh-smm-s2/patches/linux/0002-dmaengine-mxs-fix-section-mismatch.patch b/board/bsh/imx8mn-bsh-smm-s2/patches/linux/0002-dmaengine-mxs-fix-section-mismatch.patch
> new file mode 100644
> index 000000000000..a307775c669b
> --- /dev/null
> +++ b/board/bsh/imx8mn-bsh-smm-s2/patches/linux/0002-dmaengine-mxs-fix-section-mismatch.patch
> @@ -0,0 +1,35 @@
> +From 145ee0b2e192da90348f1c77ea9c69ba7001159c Mon Sep 17 00:00:00 2001
> +From: Dario Binacchi <dario.binacchi@amarulasolutions.com>
> +Date: Tue, 12 Jul 2022 15:15:19 +0200
> +Subject: [PATCH 2/2] dmaengine: mxs: fix section mismatch
> +
> +The patch was suggested by the following modpost warning:
> +
> +WARNING: modpost: vmlinux.o(.data+0xa3900): Section mismatch in reference from the variable mxs_dma_driver to the function .init.text:mxs_dma_probe()
> +The variable mxs_dma_driver references
> +the function __init mxs_dma_probe()
> +If the reference is valid then annotate the
> +variable with __init* or __refdata (see linux/init.h) or name the variable:
> +*_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console
> +
> +Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Same here as above
> +---
> + drivers/dma/mxs-dma.c | 2 +-
> + 1 file changed, 1 insertion(+), 1 deletion(-)
> +
> +diff --git a/drivers/dma/mxs-dma.c b/drivers/dma/mxs-dma.c
> +index 18f8154b859b..a01953e06048 100644
> +--- a/drivers/dma/mxs-dma.c
> ++++ b/drivers/dma/mxs-dma.c
> +@@ -834,7 +834,7 @@ static int __init mxs_dma_probe(struct platform_device *pdev)
> + return 0;
> + }
> +
> +-static struct platform_driver mxs_dma_driver = {
> ++static struct platform_driver mxs_dma_driver __initdata = {
> + .driver = {
> + .name = "mxs-dma",
> + .of_match_table = mxs_dma_dt_ids,
> +--
> +2.32.0
> +
> diff --git a/board/bsh/imx8mn-bsh-smm-s2/patches/uboot/0001-include-configs-Remove-rootwait-1-to-all-the-affecte.patch b/board/bsh/imx8mn-bsh-smm-s2/patches/uboot/0001-include-configs-Remove-rootwait-1-to-all-the-affecte.patch
> new file mode 100644
> index 000000000000..7ec8a97a0c9a
> --- /dev/null
> +++ b/board/bsh/imx8mn-bsh-smm-s2/patches/uboot/0001-include-configs-Remove-rootwait-1-to-all-the-affecte.patch
> @@ -0,0 +1,159 @@
> +From d818bfb185a9f62fc988141d2dbbf9e9bc8ffa5d Mon Sep 17 00:00:00 2001
> +From: Michael Trimarchi <michael@amarulasolutions.com>
> +Date: Sun, 22 May 2022 15:22:08 +0200
> +Subject: [PATCH 06/10] include/configs: Remove rootwait=1 to all the affected
> + boards
> +
> +rootwait=1 is not a valid kernel boot parameters. According
> +to the documenation is only rootwait
> +
> +rootwait [KNL] Wait (indefinitely) for root device to show up.
> + Useful for devices that are detected asynchronously
> + (e.g. USB and MMC devices).
> +
> +Fix:
> +Unknown kernel command line parameters "rootwait=1", will be passed to user space.
> +
> +Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
> +Reviewed-by: Heiko Schocher <hs@denx.de>
Ditto
> +---
> + include/configs/am335x_evm.h | 2 +-
> + include/configs/am43xx_evm.h | 2 +-
> + include/configs/baltos.h | 2 +-
> + include/configs/chiliboard.h | 2 +-
> + include/configs/etamin.h | 2 +-
> + include/configs/imx8mn_bsh_smm_s2.h | 2 +-
> + include/configs/siemens-am33x-common.h | 4 ++--
> + include/configs/ti_armv7_keystone2.h | 2 +-
> + include/environment/ti/nand.h | 2 +-
> + 9 files changed, 10 insertions(+), 10 deletions(-)
> +
> +diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
> +index fd5b209a52db..f301a6dc835b 100644
> +--- a/include/configs/am335x_evm.h
> ++++ b/include/configs/am335x_evm.h
> +@@ -34,7 +34,7 @@
> + "root=${nandroot} " \
> + "rootfstype=${nandrootfstype}\0" \
> + "nandroot=ubi0:rootfs rw ubi.mtd=NAND.file-system,2048\0" \
> +- "nandrootfstype=ubifs rootwait=1\0" \
> ++ "nandrootfstype=ubifs rootwait\0" \
> + "nandboot=echo Booting from nand ...; " \
> + "run nandargs; " \
> + "nand read ${fdtaddr} NAND.u-boot-spl-os; " \
> +diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h
> +index 5057441f7506..1f5c3cd04e88 100644
> +--- a/include/configs/am43xx_evm.h
> ++++ b/include/configs/am43xx_evm.h
> +@@ -166,7 +166,7 @@
> + "root=${nandroot} " \
> + "rootfstype=${nandrootfstype}\0" \
> + "nandroot=ubi0:rootfs rw ubi.mtd=NAND.file-system,4096\0" \
> +- "nandrootfstype=ubifs rootwait=1\0" \
> ++ "nandrootfstype=ubifs rootwait\0" \
> + "nandboot=echo Booting from nand ...; " \
> + "run nandargs; " \
> + "nand read ${fdtaddr} NAND.u-boot-spl-os; " \
> +diff --git a/include/configs/baltos.h b/include/configs/baltos.h
> +index b881d8c03fd7..7b43741fde7c 100644
> +--- a/include/configs/baltos.h
> ++++ b/include/configs/baltos.h
> +@@ -37,7 +37,7 @@
> + "root=${nandroot} " \
> + "rootfstype=${nandrootfstype}\0" \
> + "nandroot=ubi0:rootfs rw ubi.mtd=5\0" \
> +- "nandrootfstype=ubifs rootwait=1\0" \
> ++ "nandrootfstype=ubifs rootwait\0" \
> + "nandboot=echo Booting from nand ...; " \
> + "run nandargs; " \
> + "setenv loadaddr 0x84000000; " \
> +diff --git a/include/configs/chiliboard.h b/include/configs/chiliboard.h
> +index 82acda595f09..8bad0f9ac4b6 100644
> +--- a/include/configs/chiliboard.h
> ++++ b/include/configs/chiliboard.h
> +@@ -20,7 +20,7 @@
> + "root=${nandroot} " \
> + "rootfstype=${nandrootfstype}\0" \
> + "nandroot=ubi0:rootfs rw ubi.mtd=NAND.file-system\0" \
> +- "nandrootfstype=ubifs rootwait=1\0" \
> ++ "nandrootfstype=ubifs rootwait\0" \
> + "nandboot=echo Booting from nand ...; " \
> + "run nandargs; " \
> + "nand read ${fdt_addr} NAND.u-boot-spl-os; " \
> +diff --git a/include/configs/etamin.h b/include/configs/etamin.h
> +index dc83ab71908b..3548382d2036 100644
> +--- a/include/configs/etamin.h
> ++++ b/include/configs/etamin.h
> +@@ -113,7 +113,7 @@
> + "nand_active_ubi_vol=rootfs_a\0" \
> + "rootfs_name=rootfs\0" \
> + "kernel_name=uImage\0"\
> +- "nand_root_fs_type=ubifs rootwait=1\0" \
> ++ "nand_root_fs_type=ubifs rootwait\0" \
> + "nand_args=run bootargs_defaults;" \
> + "mtdparts default;" \
> + "setenv ${partitionset_active} true;" \
> +diff --git a/include/configs/imx8mn_bsh_smm_s2.h b/include/configs/imx8mn_bsh_smm_s2.h
> +index 098f23b206d1..f7529783692e 100644
> +--- a/include/configs/imx8mn_bsh_smm_s2.h
> ++++ b/include/configs/imx8mn_bsh_smm_s2.h
> +@@ -21,7 +21,7 @@
> + "root=${nandroot} " \
> + "rootfstype=${nandrootfstype}\0" \
> + "nandroot=ubi0:root rw ubi.mtd=nandrootfs\0" \
> +- "nandrootfstype=ubifs rootwait=1\0" \
> ++ "nandrootfstype=ubifs rootwait\0" \
> + "nandboot=echo Booting from nand ...; " \
> + "run nandargs; " \
> + "nand read ${fdt_addr_r} nanddtb; " \
> +diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h
> +index 08c4d52d658f..9f1a6cd51b40 100644
> +--- a/include/configs/siemens-am33x-common.h
> ++++ b/include/configs/siemens-am33x-common.h
> +@@ -237,7 +237,7 @@
> + "nand_active_ubi_vol=rootfs_a\0" \
> + "nand_active_ubi_vol_A=rootfs_a\0" \
> + "nand_active_ubi_vol_B=rootfs_b\0" \
> +- "nand_root_fs_type=ubifs rootwait=1\0" \
> ++ "nand_root_fs_type=ubifs rootwait\0" \
> + "nand_src_addr=0x280000\0" \
> + "nand_src_addr_A=0x280000\0" \
> + "nand_src_addr_B=0x780000\0" \
> +@@ -314,7 +314,7 @@
> + "nand_active_ubi_vol=rootfs_a\0" \
> + "rootfs_name=rootfs\0" \
> + "kernel_name=uImage\0"\
> +- "nand_root_fs_type=ubifs rootwait=1\0" \
> ++ "nand_root_fs_type=ubifs rootwait\0" \
> + "nand_args=run bootargs_defaults;" \
> + "mtdparts default;" \
> + "setenv ${partitionset_active} true;" \
> +diff --git a/include/configs/ti_armv7_keystone2.h b/include/configs/ti_armv7_keystone2.h
> +index 57f013cbf846..133daecf7164 100644
> +--- a/include/configs/ti_armv7_keystone2.h
> ++++ b/include/configs/ti_armv7_keystone2.h
> +@@ -180,7 +180,7 @@
> + "sf write ${loadaddr} 0 ${filesize}\0" \
> + "burn_uboot_nand=nand erase 0 0x100000; " \
> + "nand write ${loadaddr} 0 ${filesize}\0" \
> +- "args_all=setenv bootargs console=ttyS0,115200n8 rootwait=1 " \
> ++ "args_all=setenv bootargs console=ttyS0,115200n8 rootwait " \
> + KERNEL_MTD_PARTS \
> + "args_net=setenv bootargs ${bootargs} rootfstype=nfs " \
> + "root=/dev/nfs rw nfsroot=${serverip}:${nfs_root}," \
> +diff --git a/include/environment/ti/nand.h b/include/environment/ti/nand.h
> +index 11dcefcc41ca..7d00afa2b10f 100644
> +--- a/include/environment/ti/nand.h
> ++++ b/include/environment/ti/nand.h
> +@@ -14,7 +14,7 @@
> + "root=${nandroot} " \
> + "rootfstype=${nandrootfstype}\0" \
> + "nandroot=ubi0:rootfs rw ubi.mtd=NAND.file-system,2048\0" \
> +- "nandrootfstype=ubifs rootwait=1\0" \
> ++ "nandrootfstype=ubifs rootwait\0" \
> + "nandboot=echo Booting from nand ...; " \
> + "run nandargs; " \
> + "nand read ${fdtaddr} NAND.u-boot-spl-os; " \
> +--
> +2.32.0
> +
> diff --git a/board/bsh/imx8mn-bsh-smm-s2/post-build.sh b/board/bsh/imx8mn-bsh-smm-s2/post-build.sh
> new file mode 100755
> index 000000000000..49df4cd6fb10
> --- /dev/null
> +++ b/board/bsh/imx8mn-bsh-smm-s2/post-build.sh
> @@ -0,0 +1,4 @@
> +#!/bin/sh
> +BOARD_DIR="$(dirname $0)"
> +
> +cp ${BOARD_DIR}/nand-full.lst ${BINARIES_DIR}
> diff --git a/board/bsh/imx8mn-bsh-smm-s2/readme.txt b/board/bsh/imx8mn-bsh-smm-s2/readme.txt
> new file mode 100644
> index 000000000000..37081091e849
> --- /dev/null
> +++ b/board/bsh/imx8mn-bsh-smm-s2/readme.txt
> @@ -0,0 +1,75 @@
> +i.MX8MN BSH SMM S2
> +==================
> +
> +This tutorial describes how to use the predefined Buildroot
> +configuration for the i.MX8MN BSH SMM S2 PRO board.
> +
> +Building
> +--------
> +
> +Configure buildroot:
> +
> + $ make imx8mn_bsh_smm_s2_defconfig
> +
> +Change settings to fit your needs (optional):
> +
> + $ make menuconfig
> +
> +Compile everything and build the rootfs image:
> +
> + $ make
> +
> +
> +Result of the build
> +-------------------
> +
> +After building, the output/images directory contains:
> +
> + output/images/
> + ├── bl31.bin
> + ├── ddr3*
> + ├── flash.bin
> + ├── freescale/imx8mn-bsh-smm-s2.dtb
> + ├── Image
> + ├── nand-full.lst
> + ├── rootfs.ext2
> + ├── rootfs.ext4 -> rootfs.ext2
> + ├── rootfs.tar
> + ├── rootfs.ubifs
> + ├── u-boot.bin
> + └── u-boot-spl.bin
> +
> +
> +Preparing the board
> +-------------------
> +
> +Plug the USB type A to micro B cable into the USB Debug
> +Connector (DBG UART). Use serial port settings 115200 8N1
> +to access the debug console.
> +
> +Plug another USB type A to micro B cable into the USB-OTG
> +Connector (USB1). This connection is used to flash the board
> +firmware using the Freescale/NXP UUU tool.
> +
> +Connect the power supply/adaptor to the DC Power Jack (labelled
> ++5V).
> +
> +
> +Flashing
> +--------
> +
> +Power up the board by switching on the Power ON Switch, which is
> +placed right next to the DC Jack.
> +
> +Enter the following U-Boot commands on the debug serial console:
> +
> + $ nand erase.chip
> + $ reset
> +
> +Flash the built images directly to board’s memory. On your computer,
> +run:
> +
> + $ board/bsh/imx8mn-bsh-smm-s2/flash.sh output/
> +
> +It will flash the bootloader, the Device Tree Blob, the kernel image
> +and the UBI root file system.
> diff --git a/configs/imx8mn_bsh_smm_s2_defconfig b/configs/imx8mn_bsh_smm_s2_defconfig
> new file mode 100644
> index 000000000000..bf91afb73543
> --- /dev/null
> +++ b/configs/imx8mn_bsh_smm_s2_defconfig
> @@ -0,0 +1,40 @@
> +BR2_aarch64=y
> +BR2_GLOBAL_PATCH_DIR="board/bsh/imx8mn-bsh-smm-s2/patches"
> +BR2_TARGET_GENERIC_GETTY_PORT="ttymxc3"
> +BR2_ROOTFS_POST_BUILD_SCRIPT="board/bsh/imx8mn-bsh-smm-s2/post-build.sh"
> +BR2_LINUX_KERNEL=y
> +BR2_LINUX_KERNEL_CUSTOM_VERSION=y
> +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.18"
Here ^^^ it would be better using the latest stable version of 5.18, at
the moment it's 5.18.15, so testing again the resulting image with this
Linux version.
> +BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
> +BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/bsh/imx8mn-bsh-smm-s2/linux.fragment"
> +BR2_LINUX_KERNEL_DTS_SUPPORT=y
> +BR2_LINUX_KERNEL_INTREE_DTS_NAME="freescale/imx8mn-bsh-smm-s2"
> +BR2_LINUX_KERNEL_DTB_KEEP_DIRNAME=y
> +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
> +BR2_PACKAGE_FREESCALE_IMX=y
> +BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MN=y
> +BR2_PACKAGE_FIRMWARE_IMX=y
> +BR2_PACKAGE_FIRMWARE_IMX_DDR3=y
> +BR2_TARGET_ROOTFS_UBIFS=y
> +BR2_TARGET_ROOTFS_UBIFS_LEBSIZE=0x1f000
> +BR2_TARGET_ROOTFS_UBIFS_RT_NONE=y
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.5"
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="imx8mn"
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="IMX_BOOT_UART_BASE=0x30a60000"
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_DEBUG=y
> +BR2_TARGET_UBOOT=y
> +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
> +BR2_TARGET_UBOOT_CUSTOM_VERSION=y
> +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.07"
> +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="imx8mn_bsh_smm_s2"
> +BR2_TARGET_UBOOT_NEEDS_DTC=y
> +BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
> +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
> +BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
> +BR2_TARGET_UBOOT_NEEDS_IMX_FIRMWARE=y
> +BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
> +BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="flash.bin"
> +BR2_TARGET_UBOOT_SPL=y
> +BR2_PACKAGE_HOST_UUU=y
I've built successfully this defconfig using Buildroot's
utils/docker-run so all host dependencies are met.
I don't have the board but I've tried anyway to call:
board/bsh/imx8mn-bsh-smm-s2/flash.sh output
and of course it fails because there is not the board connected, but the
error message is as follows:
"
terminate called after throwing an instance of 'std::runtime_error'
what(): Call libusb_init failure
board/bsh/imx8mn-bsh-smm-s2/flash.sh: line 25: 434921 Aborted
(core dumped)
"
it seems something related to uuu package that doesn't deal with errors
that well. It's acceptable but it could be good to improve uuu package
to deal with that error in a more elegant way if you can.
Waiting for V4.
Thank you All!
Best regards
--
Giulio Benetti
Benetti Engineering sas
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [Buildroot] [PATCH v3 2/2] configs/imx8mn_bsh_smm_s2_pro_defconfig: new defconfig
2022-07-13 6:30 ` [Buildroot] [PATCH v3 2/2] configs/imx8mn_bsh_smm_s2_pro_defconfig: " Dario Binacchi
@ 2022-07-29 21:26 ` Giulio Benetti
2022-09-01 15:14 ` Dario Binacchi
0 siblings, 1 reply; 7+ messages in thread
From: Giulio Benetti @ 2022-07-29 21:26 UTC (permalink / raw)
To: Dario Binacchi, buildroot
Cc: Ariel D'Alessandro, Jagan Teki, Ariel D'Alessandro,
Heiko Thiery, Michael Trimarchi, linux-amarula
Hi Dario, Michael, Ariel, All,
On 13/07/22 08:30, Dario Binacchi wrote:
> From: Michael Trimarchi <michael@amarulasolutions.com>
>
> BSH SMM S2 PRO (SystemMaster S2 Pro) Board is an add-on board which
> provide input and output interfaces to a dedicated carrier board. It is
> designed mainly to provide graphical/video and connectivity interfaces
> to the appliance.
>
> Board support package includes the following components:
> - mainline Linux kernel 5.18
> - mainline U-Boot 2022-07
> - Default packages from buildroot
>
> https://www.apertis.org/reference_hardware/imx8mn_bsh_smm_s2pro_setup/
>
> Add Ariel D'Alessandro and Dario Binacchi as co-maintainer, we work
> together on platform mainline
>
> Build and tested using:
> docker pull registry.gitlab.com/buildroot.org/buildroot/base:20220105.2314
>
> Cc: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
> Cc: Jagan Teki <jagan@amarulasolutions.com>
> Cc: Heiko Thiery <heiko.thiery@gmail.com>
> Cc: Giulio Benetti <giulio.benetti@benettiengineering.com>
> Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
> Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
> Tested-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
> Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
> ---
>
> Changes in v3:
> - Update the commit description.
> - Bump U-Boot to version 2022-07.
>
> Changes in v2:
> - Change commit subject line.
> - Use the buildroot's output directory if the binaries directory is
> not passed as a parameter to the `flash.sh' script.
> - Replace the linux.config file with an architectural defconfig and
> a config fragment for the changes.
>
> Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
> ---
> DEVELOPERS | 4 +
> .../imx8mn-bsh-smm-s2/linux.fragment | 0
> board/bsh/imx8mn-bsh-smm-s2-pro/extlinux.conf | 4 +
> board/bsh/imx8mn-bsh-smm-s2-pro/flash.sh | 23 ++++++
> board/bsh/imx8mn-bsh-smm-s2-pro/genimage.cfg | 17 +++++
> board/bsh/imx8mn-bsh-smm-s2-pro/post-build.sh | 7 ++
> board/bsh/imx8mn-bsh-smm-s2-pro/post-image.sh | 3 +
> board/bsh/imx8mn-bsh-smm-s2-pro/readme.txt | 73 +++++++++++++++++++
> configs/imx8mn_bsh_smm_s2_defconfig | 2 +-
> configs/imx8mn_bsh_smm_s2_pro_defconfig | 41 +++++++++++
> 10 files changed, 173 insertions(+), 1 deletion(-)
> rename board/bsh/{ => common}/imx8mn-bsh-smm-s2/linux.fragment (100%)
> create mode 100644 board/bsh/imx8mn-bsh-smm-s2-pro/extlinux.conf
> create mode 100755 board/bsh/imx8mn-bsh-smm-s2-pro/flash.sh
> create mode 100644 board/bsh/imx8mn-bsh-smm-s2-pro/genimage.cfg
> create mode 100755 board/bsh/imx8mn-bsh-smm-s2-pro/post-build.sh
> create mode 100755 board/bsh/imx8mn-bsh-smm-s2-pro/post-image.sh
> create mode 100644 board/bsh/imx8mn-bsh-smm-s2-pro/readme.txt
> create mode 100644 configs/imx8mn_bsh_smm_s2_pro_defconfig
>
> diff --git a/DEVELOPERS b/DEVELOPERS
> index 33a77f462166..b6eebfc5fa84 100644
> --- a/DEVELOPERS
> +++ b/DEVELOPERS
> @@ -215,6 +215,8 @@ F: configs/snps_archs38_haps_defconfig
> F: configs/snps_archs38_hsdk_defconfig
>
> N: Ariel D'Alessandro <ariel@vanguardiasur.com.ar>
> +F: board/bsh/
> +F: configs/imx8mn_bsh_smm_s2_pro_defconfig
> F: package/axfsutils/
> F: package/mali-t76x/
>
> @@ -659,6 +661,7 @@ F: package/xinetd/
> N: Dario Binacchi <dario.binacchi@amarulasolutions.com>
> F: board/bsh/
> F: configs/imx8mn_bsh_smm_s2_defconfig
> +F: configs/imx8mn_bsh_smm_s2_pro_defconfig
> F: package/uuu/
>
> N: Dario Binacchi <dariobin@libero.it>
> @@ -2049,6 +2052,7 @@ F: package/python-pyzmq/
> N: Michael Trimarchi <michael@amarulasolutions.com>
> F: board/bsh/
> F: configs/imx8mn_bsh_smm_s2_defconfig
> +F: configs/imx8mn_bsh_smm_s2_pro_defconfig
> F: package/python-spidev/
>
> N: Michael Vetter <jubalh@iodoru.org>
> diff --git a/board/bsh/imx8mn-bsh-smm-s2/linux.fragment b/board/bsh/common/imx8mn-bsh-smm-s2/linux.fragment
> similarity index 100%
> rename from board/bsh/imx8mn-bsh-smm-s2/linux.fragment
> rename to board/bsh/common/imx8mn-bsh-smm-s2/linux.fragment
> diff --git a/board/bsh/imx8mn-bsh-smm-s2-pro/extlinux.conf b/board/bsh/imx8mn-bsh-smm-s2-pro/extlinux.conf
> new file mode 100644
> index 000000000000..911135474253
> --- /dev/null
> +++ b/board/bsh/imx8mn-bsh-smm-s2-pro/extlinux.conf
> @@ -0,0 +1,4 @@
> +label buildroot
> + kernel /boot/Image
> + devicetree /boot/freescale/imx8mn-bsh-smm-s2pro.dtb
> + append root=PARTUUID=%PARTUUID% rootwait rw
> diff --git a/board/bsh/imx8mn-bsh-smm-s2-pro/flash.sh b/board/bsh/imx8mn-bsh-smm-s2-pro/flash.sh
> new file mode 100755
> index 000000000000..17b20f009771
> --- /dev/null
> +++ b/board/bsh/imx8mn-bsh-smm-s2-pro/flash.sh
> @@ -0,0 +1,23 @@
> +#!/bin/bash
> +
> +if [ $# -eq 0 ]; then
> + OUTPUT_DIR=output
> +else
> + OUTPUT_DIR=$1
> +fi
> +
> +if ! test -d "${OUTPUT_DIR}" ; then
> + echo "ERROR: no output directory specified."
> + echo "Usage: $0 OUTPUT_DIR"
> + echo ""
> + echo "Arguments:"
> + echo " OUTPUT_DIR The Buildroot output directory."
> + exit 1
> +fi
> +
> +IMAGES_DIR=${OUTPUT_DIR}/images
> +
> +${OUTPUT_DIR}/host/bin/uuu -v -b emmc_all \
> + ${IMAGES_DIR}/flash.bin \
> + ${IMAGES_DIR}/sdcard.img
> +
> diff --git a/board/bsh/imx8mn-bsh-smm-s2-pro/genimage.cfg b/board/bsh/imx8mn-bsh-smm-s2-pro/genimage.cfg
> new file mode 100644
> index 000000000000..bc100b171dd6
> --- /dev/null
> +++ b/board/bsh/imx8mn-bsh-smm-s2-pro/genimage.cfg
> @@ -0,0 +1,17 @@
> +image sdcard.img {
> + hdimage {
> + partition-table-type = "gpt"
> + }
> +
> + partition imx-boot {
> + in-partition-table = "no"
> + image = "flash.bin"
> + offset = 33K
> + }
> +
> + partition rootfs {
> + offset = 8M
> + image = "rootfs.ext4"
> + partition-uuid = %PARTUUID%
> + }
> +}
> diff --git a/board/bsh/imx8mn-bsh-smm-s2-pro/post-build.sh b/board/bsh/imx8mn-bsh-smm-s2-pro/post-build.sh
> new file mode 100755
> index 000000000000..bf8861f6a914
> --- /dev/null
> +++ b/board/bsh/imx8mn-bsh-smm-s2-pro/post-build.sh
> @@ -0,0 +1,7 @@
> +#!/bin/sh
> +BOARD_DIR="$(dirname $0)"
> +PARTUUID="$($HOST_DIR/bin/uuidgen)"
> +
> +install -d "$TARGET_DIR/boot/extlinux/"
> +sed "s/%PARTUUID%/$PARTUUID/g" "$BOARD_DIR/extlinux.conf" > "$TARGET_DIR/boot/extlinux/extlinux.conf"
> +sed "s/%PARTUUID%/$PARTUUID/g" "$BOARD_DIR/genimage.cfg" > "$BINARIES_DIR/genimage.cfg"
> diff --git a/board/bsh/imx8mn-bsh-smm-s2-pro/post-image.sh b/board/bsh/imx8mn-bsh-smm-s2-pro/post-image.sh
> new file mode 100755
> index 000000000000..3452fd4501f8
> --- /dev/null
> +++ b/board/bsh/imx8mn-bsh-smm-s2-pro/post-image.sh
> @@ -0,0 +1,3 @@
> +#!/bin/sh
> +
> +support/scripts/genimage.sh -c ${BINARIES_DIR}/genimage.cfg
> diff --git a/board/bsh/imx8mn-bsh-smm-s2-pro/readme.txt b/board/bsh/imx8mn-bsh-smm-s2-pro/readme.txt
> new file mode 100644
> index 000000000000..5763f164fe13
> --- /dev/null
> +++ b/board/bsh/imx8mn-bsh-smm-s2-pro/readme.txt
> @@ -0,0 +1,73 @@
> +i.MX8MN BSH SMM S2 PRO
> +======================
> +
> +How to build it
> +---------------
> +
> +Configure buildroot:
> +
> + $ make imx8mn_bsh_smm_s2_pro_defconfig
> +
> +Change settings to fit your needs (optional):
> +
> + $ make menuconfig
> +
> +Compile everything and build the rootfs image:
> +
> + $ make
> +
> +
> +Result of the build
> +-------------------
> +
> +After building, the output/images directory contains:
> +
> + output/images/
> + ├── bl31.bin
> + ├── Image
> + ├── flash.bin
> + ├── ddr3*
> + ├── rootfs.ext2
> + ├── rootfs.ext4 -> rootfs.ext2
> + ├── rootfs.tar
> + ├── sdcard.img
> + ├── u-boot.bin
> + ├── u-boot-nodtb.bin
> + └── u-boot-spl.bin
> +
> +
> +Preparing the board
> +-------------------
> +
> +Plug the USB type A to micro B cable into the USB Debug
> +Connector (DBG UART). Use serial port settings 115200 8N1
> +to access the debug console.
> +
> +Plug another USB type A to micro B cable into the USB-OTG
> +Connector (USB1). This connection is used to flash the board
> +firmware using the Freescale/NXP UUU tool.
> +
> +Connect the power supply/adaptor to the DC Power Jack (labelled
> ++5V).
> +
> +
> +Flashing the emmc card image
> +----------------------------
> +
> +Power up the board by switching on the Power ON Switch, which is
> +placed right next to the DC Jack.
> +
> +Enter the following U-Boot commands on the debug serial console:
> +
> + $ fastboot usb 0
> +
> +Flash the images on eMMC. On your computer, run:
> +
> + $ board/bsh/imx8mn-bsh-smm-s2-pro/flash.sh output/
> +
> +
> +Booting the board
> +-----------------
> +
> +By default the bootloader will search for the first valid image,
> +starting with the internal eMMC.
> diff --git a/configs/imx8mn_bsh_smm_s2_defconfig b/configs/imx8mn_bsh_smm_s2_defconfig
> index bf91afb73543..7a0eb5ed4591 100644
> --- a/configs/imx8mn_bsh_smm_s2_defconfig
> +++ b/configs/imx8mn_bsh_smm_s2_defconfig
> @@ -6,7 +6,7 @@ BR2_LINUX_KERNEL=y
> BR2_LINUX_KERNEL_CUSTOM_VERSION=y
> BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.18"
> BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
> -BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/bsh/imx8mn-bsh-smm-s2/linux.fragment"
> +BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/bsh/common/imx8mn-bsh-smm-s2/linux.fragment"
> BR2_LINUX_KERNEL_DTS_SUPPORT=y
> BR2_LINUX_KERNEL_INTREE_DTS_NAME="freescale/imx8mn-bsh-smm-s2"
> BR2_LINUX_KERNEL_DTB_KEEP_DIRNAME=y
> diff --git a/configs/imx8mn_bsh_smm_s2_pro_defconfig b/configs/imx8mn_bsh_smm_s2_pro_defconfig
> new file mode 100644
> index 000000000000..ee8f79b5cd21
> --- /dev/null
> +++ b/configs/imx8mn_bsh_smm_s2_pro_defconfig
> @@ -0,0 +1,41 @@
> +BR2_aarch64=y
> +BR2_TARGET_GENERIC_GETTY_PORT="ttymxc3"
> +BR2_ROOTFS_POST_BUILD_SCRIPT="board/bsh/imx8mn-bsh-smm-s2-pro/post-build.sh"
> +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/bsh/imx8mn-bsh-smm-s2-pro/post-image.sh"
> +BR2_LINUX_KERNEL=y
> +BR2_LINUX_KERNEL_CUSTOM_VERSION=y
> +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.18"
I've already give my Reviewed-by but I would update to latest stable
Linux version here ^^^.
> +BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
> +BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/bsh/common/imx8mn-bsh-smm-s2/linux.fragment"
> +BR2_LINUX_KERNEL_DTS_SUPPORT=y
> +BR2_LINUX_KERNEL_INTREE_DTS_NAME="freescale/imx8mn-bsh-smm-s2pro"
> +BR2_LINUX_KERNEL_DTB_KEEP_DIRNAME=y
> +BR2_LINUX_KERNEL_INSTALL_TARGET=y
> +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
> +BR2_PACKAGE_FREESCALE_IMX=y
> +BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MN=y
> +BR2_PACKAGE_FIRMWARE_IMX=y
> +BR2_PACKAGE_FIRMWARE_IMX_DDR3=y
> +BR2_TARGET_ROOTFS_EXT2=y
> +BR2_TARGET_ROOTFS_EXT2_4=y
> +BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.5"
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="imx8mn"
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="IMX_BOOT_UART_BASE=0x30a60000"
> +BR2_TARGET_UBOOT=y
> +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
> +BR2_TARGET_UBOOT_CUSTOM_VERSION=y
> +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.07"
> +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="imx8mn_bsh_smm_s2pro"
> +BR2_TARGET_UBOOT_NEEDS_DTC=y
> +BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
> +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
> +BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
> +BR2_TARGET_UBOOT_NEEDS_IMX_FIRMWARE=y
> +BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
> +BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="flash.bin"
> +BR2_TARGET_UBOOT_SPL=y
> +BR2_PACKAGE_HOST_GENIMAGE=y
> +BR2_PACKAGE_HOST_UUU=y
All the rest looks good to me and can be committed.
Best regards
--
Giulio Benetti
Benetti Engineering sas
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [Buildroot] [PATCH v3 1/2] configs/imx8mn_bsh_smm_s2_defconfig: new defconfig
2022-07-29 21:19 ` Giulio Benetti
@ 2022-09-01 15:13 ` Dario Binacchi
0 siblings, 0 replies; 7+ messages in thread
From: Dario Binacchi @ 2022-09-01 15:13 UTC (permalink / raw)
To: Giulio Benetti
Cc: Ariel D'Alessandro, Michael Trimarchi, linux-amarula, buildroot
Hi Giulio,
Sorry for the late reply
On Fri, Jul 29, 2022 at 11:19 PM Giulio Benetti
<giulio.benetti@benettiengineering.com> wrote:
>
> Hi Dario, Michael, Ariel, All,
>
> On 13/07/22 08:30, Dario Binacchi wrote:
> > BSH SMM S2 (SystemMaster S2) Board is an add-on board which provide
> > input and output interfaces to a dedicated carrier board. It is designed
> > mainly to provide graphical/video and connectivity interfaces to the
> > appliance.
>
> Can you please provide an URL to the product here in commit log?
I can add the link for the BSH smm-s2-pro board, the board is basically the same
except it boots from NAND instead of eMMC.
>
> > Board support package includes the following components:
> > - mainline Linux kernel 5.18
> > - mainline U-Boot 2022-07
> > - default packages from buildroot
> >
> > Patches applied to the Linux kernel and U-Boot have been submitted but
> > not merged yet.
> >
> > Co-authored-by: Michael Trimarchi <michael@amarulasolutions.com>
> > Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
> > Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
> > ---
> >
> > Changes in v3:
> > - Update the commit description.
> > - Bump U-Boot to version 2022-07.
> > - Remove U-Boot patches merged in version 2022-07.
> > - Update the Linux patches.
> >
> > Changes in v2:
> > - Change commit subject and description.
> > - Update linux patch to version 4. It hasn't been merged yet but has
> > been reviewed. This is the most up-to-date version.
> > - Replace `Co-developed-by:' tag with `Co-authored-by'.
> > - Use the buildroot's output directory if the binaries directory is
> > not passed as a parameter to the `flash.sh' script.
> > - Replace the linux.config file with an architectural defconfig and
> > a config fragment for the changes.
> > - Remove useless and deprecated statements in nand-full.lst.
> > - Remove the buildroot configurations for ext2/ext4 filesystem creation.
> >
> > Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
> > ---
> > DEVELOPERS | 4 +
> > board/bsh/imx8mn-bsh-smm-s2/flash.sh | 26 +
> > board/bsh/imx8mn-bsh-smm-s2/linux.fragment | 931 ++++++++++++++++++
> > board/bsh/imx8mn-bsh-smm-s2/nand-full.lst | 29 +
> > ...ine-mxs-use-platform_driver_register.patch | 64 ++
> > ...2-dmaengine-mxs-fix-section-mismatch.patch | 35 +
> > ...Remove-rootwait-1-to-all-the-affecte.patch | 159 +++
> > board/bsh/imx8mn-bsh-smm-s2/post-build.sh | 4 +
> > board/bsh/imx8mn-bsh-smm-s2/readme.txt | 75 ++
> > configs/imx8mn_bsh_smm_s2_defconfig | 40 +
> > 10 files changed, 1367 insertions(+)
> > create mode 100755 board/bsh/imx8mn-bsh-smm-s2/flash.sh
> > create mode 100644 board/bsh/imx8mn-bsh-smm-s2/linux.fragment
> > create mode 100644 board/bsh/imx8mn-bsh-smm-s2/nand-full.lst
> > create mode 100644 board/bsh/imx8mn-bsh-smm-s2/patches/linux/0001-dmaengine-mxs-use-platform_driver_register.patch
> > create mode 100644 board/bsh/imx8mn-bsh-smm-s2/patches/linux/0002-dmaengine-mxs-fix-section-mismatch.patch
> > create mode 100644 board/bsh/imx8mn-bsh-smm-s2/patches/uboot/0001-include-configs-Remove-rootwait-1-to-all-the-affecte.patch
> > create mode 100755 board/bsh/imx8mn-bsh-smm-s2/post-build.sh
> > create mode 100644 board/bsh/imx8mn-bsh-smm-s2/readme.txt
> > create mode 100644 configs/imx8mn_bsh_smm_s2_defconfig
> >
> > diff --git a/DEVELOPERS b/DEVELOPERS
> > index 0afd697b6cc6..33a77f462166 100644
> > --- a/DEVELOPERS
> > +++ b/DEVELOPERS
> > @@ -657,6 +657,8 @@ F: package/luaexpat/
> > F: package/xinetd/
> >
> > N: Dario Binacchi <dario.binacchi@amarulasolutions.com>
> > +F: board/bsh/
> > +F: configs/imx8mn_bsh_smm_s2_defconfig
> > F: package/uuu/
> >
> > N: Dario Binacchi <dariobin@libero.it>
> > @@ -2045,6 +2047,8 @@ F: package/python-crc16/
> > F: package/python-pyzmq/
> >
> > N: Michael Trimarchi <michael@amarulasolutions.com>
> > +F: board/bsh/
> > +F: configs/imx8mn_bsh_smm_s2_defconfig
> > F: package/python-spidev/
> >
> > N: Michael Vetter <jubalh@iodoru.org>
> > diff --git a/board/bsh/imx8mn-bsh-smm-s2/flash.sh b/board/bsh/imx8mn-bsh-smm-s2/flash.sh
> > new file mode 100755
> > index 000000000000..1f343d516dcf
> > --- /dev/null
> > +++ b/board/bsh/imx8mn-bsh-smm-s2/flash.sh
> > @@ -0,0 +1,26 @@
> > +#!/bin/bash
> > +
> > +if [ $# -eq 0 ]; then
> > + OUTPUT_DIR=output
> > +else
> > + OUTPUT_DIR=$1
> > +fi
> > +
> > +if ! test -d "${OUTPUT_DIR}" ; then
> > + echo "ERROR: no output directory specified."
> > + echo "Usage: $0 OUTPUT_DIR"
> > + echo ""
> > + echo "Arguments:"
> > + echo " OUTPUT_DIR The Buildroot output directory."
> > + exit 1
> > +fi
> > +
> > +IMAGES_DIR=${OUTPUT_DIR}/images
> > +
> > +${OUTPUT_DIR}/host/bin/uuu -v -b ${IMAGES_DIR}/nand-full.lst \
> > + ${IMAGES_DIR}/flash.bin \
> > + ${IMAGES_DIR}/flash.bin \
> > + ${IMAGES_DIR}/rootfs.ubifs \
> > + ${IMAGES_DIR}/Image \
> > + ${IMAGES_DIR}/freescale/imx8mn-bsh-smm-s2.dtb
> > +
> > diff --git a/board/bsh/imx8mn-bsh-smm-s2/linux.fragment b/board/bsh/imx8mn-bsh-smm-s2/linux.fragment
> > new file mode 100644
> > index 000000000000..7388b7f1277c
> > --- /dev/null
> > +++ b/board/bsh/imx8mn-bsh-smm-s2/linux.fragment
> > @@ -0,0 +1,931 @@
> > +# CONFIG_BPF_SYSCALL is not set
> > +# CONFIG_BPF_UNPRIV_DEFAULT_OFF is not set
> > +CONFIG_TASK_DELAY_ACCT=y
> > +CONFIG_CGROUP_FREEZER=y
> > +# CONFIG_CGROUP_BPF is not set
> > +CONFIG_RELAY=y
> > +# CONFIG_ARCH_ACTIONS is not set
> > +# CONFIG_ARCH_SUNXI is not set
> > +# CONFIG_ARCH_ALPINE is not set
> > +# CONFIG_ARCH_APPLE is not set
> > +# CONFIG_ARCH_BCM2835 is not set
> > +# CONFIG_ARCH_BCM4908 is not set
> > +# CONFIG_ARCH_BCM_IPROC is not set
> > +# CONFIG_ARCH_BERLIN is not set
> > +# CONFIG_ARCH_BRCMSTB is not set
> > +# CONFIG_ARCH_EXYNOS is not set
> > +# CONFIG_ARCH_K3 is not set
> > +# CONFIG_ARCH_LAYERSCAPE is not set
> > +# CONFIG_ARCH_LG1K is not set
> > +# CONFIG_ARCH_HISI is not set
> > +# CONFIG_ARCH_KEEMBAY is not set
> > +# CONFIG_ARCH_MEDIATEK is not set
> > +# CONFIG_ARCH_MESON is not set
> > +# CONFIG_ARCH_MVEBU is not set
> > +# CONFIG_ARCH_QCOM is not set
> > +# CONFIG_ARCH_RENESAS is not set
> > +# CONFIG_ARCH_ROCKCHIP is not set
> > +# CONFIG_ARCH_S32 is not set
> > +# CONFIG_ARCH_SEATTLE is not set
> > +# CONFIG_ARCH_INTEL_SOCFPGA is not set
> > +# CONFIG_ARCH_SYNQUACER is not set
> > +# CONFIG_ARCH_TEGRA is not set
> > +# CONFIG_ARCH_TESLA_FSD is not set
> > +# CONFIG_ARCH_SPRD is not set
> > +# CONFIG_ARCH_THUNDER is not set
> > +# CONFIG_ARCH_THUNDER2 is not set
> > +# CONFIG_ARCH_UNIPHIER is not set
> > +# CONFIG_ARCH_VEXPRESS is not set
> > +# CONFIG_ARCH_VISCONTI is not set
> > +# CONFIG_ARCH_XGENE is not set
> > +# CONFIG_ARCH_ZYNQMP is not set
> > +# CONFIG_PARAVIRT is not set
> > +# CONFIG_KEXEC is not set
> > +# CONFIG_KEXEC_FILE is not set
> > +# CONFIG_XEN is not set
> > +# CONFIG_ARM64_PTR_AUTH is not set
> > +# CONFIG_ARM64_TLB_RANGE is not set
> > +# CONFIG_ARM64_MTE is not set
> > +CONFIG_PM_DEBUG=y
> > +CONFIG_PM_TEST_SUSPEND=y
> > +# CONFIG_HIBERNATION is not set
> > +CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
> > +CONFIG_CPU_FREQ_GOV_POWERSAVE=y
> > +CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
> > +CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
> > +# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
> > +# CONFIG_ARM_ALLWINNER_SUN50I_CPUFREQ_NVMEM is not set
> > +# CONFIG_ARM_ARMADA_37XX_CPUFREQ is not set
> > +CONFIG_ARM_IMX_CPUFREQ_DT=y
> > +# CONFIG_ARM_QCOM_CPUFREQ_NVMEM is not set
> > +# CONFIG_ARM_QCOM_CPUFREQ_HW is not set
> > +# CONFIG_ARM_RASPBERRYPI_CPUFREQ is not set
> > +# CONFIG_ARM_SCMI_CPUFREQ is not set
> > +# CONFIG_ARM_TEGRA186_CPUFREQ is not set
> > +# CONFIG_ARM_MEDIATEK_CPUFREQ is not set
> > +# CONFIG_QORIQ_CPUFREQ is not set
> > +# CONFIG_ACPI_APEI_PCIEAER is not set
> > +# CONFIG_VIRTUALIZATION is not set
> > +# CONFIG_KVM is not set
> > +# CONFIG_GCC_PLUGINS is not set
> > +CONFIG_SECCOMP=y
> > +CONFIG_IPV6=y
> > +CONFIG_MODVERSIONS=y
> > +CONFIG_IPV6_SIT=m
> > +# CONFIG_NET_DSA_TAG_BRCM is not set
> > +# CONFIG_NET_DSA_TAG_BRCM_LEGACY is not set
> > +# CONFIG_NET_DSA_TAG_BRCM_PREPEND is not set
> > +CONFIG_NET_DSA_TAG_OCELOT=m
> > +# CONFIG_NET_DSA_TAG_OCELOT_8021Q is not set
> > +CONFIG_VLAN_8021Q=y
> > +CONFIG_LLC2=y
> > +CONFIG_NET_SCH_MULTIQ=m
> > +CONFIG_NET_CLS_TCINDEX=m
> > +CONFIG_NET_PKTGEN=m
> > +CONFIG_BT=y
> > +CONFIG_BT_LE=y
> > +CONFIG_BT_RFCOMM=y
> > +CONFIG_BT_RFCOMM_TTY=y
> > +CONFIG_BT_BNEP=y
> > +CONFIG_BT_BNEP_MC_FILTER=y
> > +CONFIG_BT_BNEP_PROTO_FILTER=y
> > +CONFIG_BT_HIDP=y
> > +# CONFIG_CAN_RCAR is not set
> > +# CONFIG_CAN_RCAR_CANFD is not set
> > +# CONFIG_CAN_MCP251XFD is not set
> > +CONFIG_BT_HCIUART=y
> > +CONFIG_BT_HCIUART_BCSP=y
> > +CONFIG_BT_HCIUART_ATH3K=y
> > +CONFIG_BT_HCIUART_3WIRE=y
> > +CONFIG_BT_HCIVHCI=y
> > +CONFIG_CFG80211=y
> > +CONFIG_NL80211_TESTMODE=y
> > +CONFIG_CFG80211_WEXT=y
> > +CONFIG_MAC80211=y
> > +# CONFIG_BT_HCIUART_MRVL is not set
> > +# CONFIG_BT_MRVL is not set
> > +# CONFIG_BT_MRVL_SDIO is not set
> > +# CONFIG_RFKILL is not set
> > +# CONFIG_PCI is not set
> > +# CONFIG_PCIEPORTBUS is not set
> > +# CONFIG_PCIEAER is not set
> > +# CONFIG_PCI_IOV is not set
> > +# CONFIG_PCI_PASID is not set
> > +# CONFIG_HOTPLUG_PCI is not set
> > +# CONFIG_HOTPLUG_PCI_ACPI is not set
> > +# CONFIG_PCI_AARDVARK is not set
> > +# CONFIG_PCI_TEGRA is not set
> > +# CONFIG_PCIE_RCAR_HOST is not set
> > +# CONFIG_PCIE_RCAR_EP is not set
> > +# CONFIG_PCI_HOST_GENERIC is not set
> > +# CONFIG_PCI_XGENE is not set
> > +# CONFIG_PCIE_ALTERA is not set
> > +# CONFIG_PCIE_ALTERA_MSI is not set
> > +# CONFIG_PCI_HOST_THUNDER_PEM is not set
> > +# CONFIG_PCI_HOST_THUNDER_ECAM is not set
> > +# CONFIG_PCIE_ROCKCHIP_HOST is not set
> > +# CONFIG_PCIE_BRCMSTB is not set
> > +# CONFIG_PCI_IMX6 is not set
> > +# CONFIG_PCI_LAYERSCAPE is not set
> > +# CONFIG_PCI_HISI is not set
> > +# CONFIG_PCIE_QCOM is not set
> > +# CONFIG_PCIE_ARMADA_8K is not set
> > +# CONFIG_PCIE_KIRIN is not set
> > +# CONFIG_PCIE_HISI_STB is not set
> > +# CONFIG_PCIE_TEGRA194_HOST is not set
> > +# CONFIG_PCIE_VISCONTI_HOST is not set
> > +# CONFIG_PCIE_LAYERSCAPE_GEN4 is not set
> > +# CONFIG_PCI_ENDPOINT is not set
> > +# CONFIG_PCI_ENDPOINT_CONFIGFS is not set
> > +# CONFIG_PCI_EPF_TEST is not set
> > +CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
> > +CONFIG_BRCMSTB_GISB_ARB=y
> > +CONFIG_VEXPRESS_CONFIG=y
> > +# CONFIG_HISILICON_LPC is not set
> > +# CONFIG_TEGRA_ACONNECT is not set
> > +# CONFIG_RASPBERRYPI_FIRMWARE is not set
> > +# CONFIG_INTEL_STRATIX10_SERVICE is not set
> > +# CONFIG_INTEL_STRATIX10_RSU is not set
> > +CONFIG_IMX_DSP=y
> > +# CONFIG_GNSS is not set
> > +# CONFIG_GNSS_MTK_SERIAL is not set
> > +CONFIG_MTD_CMDLINE_PARTS=y
> > +# CONFIG_MTD_NAND_BRCMNAND is not set
> > +CONFIG_MTD_NAND_GPMI_NAND=y
> > +# CONFIG_MTD_NAND_MARVELL is not set
> > +# CONFIG_MTD_NAND_FSL_IFC is not set
> > +# CONFIG_MTD_NAND_QCOM is not set
> > +# CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
> > +CONFIG_MTD_UBI=y
> > +# CONFIG_OF_OVERLAY is not set
> > +# CONFIG_BLK_DEV_NVME is not set
> > +# CONFIG_PCI_ENDPOINT_TEST is not set
> > +CONFIG_RAID_ATTRS=m
> > +# CONFIG_SCSI_HISI_SAS_PCI is not set
> > +# CONFIG_MEGARAID_SAS is not set
> > +# CONFIG_SCSI_MPT3SAS is not set
> > +# CONFIG_SCSI_UFS_QCOM is not set
> > +# CONFIG_SCSI_UFS_HISI is not set
> > +# CONFIG_SCSI_UFS_EXYNOS is not set
> > +# CONFIG_SATA_AHCI is not set
> > +CONFIG_AHCI_IMX=y
> > +# CONFIG_AHCI_BRCM is not set
> > +# CONFIG_AHCI_MVEBU is not set
> > +# CONFIG_SATA_SIL24 is not set
> > +# CONFIG_SATA_RCAR is not set
> > +CONFIG_DM_CRYPT=m
> > +# CONFIG_B53 is not set
> > +# CONFIG_NET_DSA_BCM_SF2 is not set
> > +# CONFIG_NET_DSA_MSCC_FELIX is not set
> > +# CONFIG_NET_XGENE is not set
> > +# CONFIG_ATL1C is not set
> > +# CONFIG_SYSTEMPORT is not set
> > +# CONFIG_BNX2X is not set
> > +# CONFIG_THUNDER_NIC_PF is not set
> > +CONFIG_FSL_XGMAC_MDIO=y
> > +CONFIG_FSL_ENETC_IERB=y
> > +# CONFIG_FSL_FMAN is not set
> > +# CONFIG_FSL_DPAA_ETH is not set
> > +# CONFIG_FSL_DPAA2_ETH is not set
> > +# CONFIG_FSL_ENETC is not set
> > +# CONFIG_FSL_ENETC_VF is not set
> > +# CONFIG_FSL_ENETC_QOS is not set
> > +CONFIG_MVMDIO=y
> > +CONFIG_MSCC_OCELOT_SWITCH=m
> > +# CONFIG_HNS3 is not set
> > +# CONFIG_HNS3_HCLGE is not set
> > +# CONFIG_HNS3_ENET is not set
> > +# CONFIG_E1000 is not set
> > +# CONFIG_E1000E is not set
> > +# CONFIG_IGB is not set
> > +# CONFIG_IGBVF is not set
> > +# CONFIG_MVNETA is not set
> > +# CONFIG_MVPP2 is not set
> > +# CONFIG_SKY2 is not set
> > +# CONFIG_MLX4_EN is not set
> > +# CONFIG_MLX5_CORE is not set
> > +# CONFIG_MLX5_CORE_EN is not set
> > +# CONFIG_R8169 is not set
> > +# CONFIG_SH_ETH is not set
> > +# CONFIG_RAVB is not set
> > +CONFIG_STMMAC_ETH=y
> > +CONFIG_STMMAC_PLATFORM=y
> > +CONFIG_DWMAC_GENERIC=m
> > +CONFIG_DWMAC_IMX8=y
> > +# CONFIG_BROADCOM_PHY is not set
> > +CONFIG_MICROCHIP_PHY=y
> > +CONFIG_NXP_TJA11XX_PHY=y
> > +# CONFIG_SNI_AVE is not set
> > +# CONFIG_SNI_NETSEC is not set
> > +# CONFIG_TI_K3_AM65_CPSW_NUSS is not set
> > +# CONFIG_QCOM_IPA is not set
> > +# CONFIG_MESON_GXL_PHY is not set
> > +# CONFIG_AQUANTIA_PHY is not set
> > +# CONFIG_BCM54140_PHY is not set
> > +# CONFIG_MARVELL_PHY is not set
> > +# CONFIG_MARVELL_10G_PHY is not set
> > +# CONFIG_MICREL_PHY is not set
> > +# CONFIG_MICROSEMI_PHY is not set
> > +# CONFIG_AT803X_PHY is not set
> > +CONFIG_MDIO_BITBANG=y
> > +# CONFIG_ROCKCHIP_PHY is not set
> > +# CONFIG_DP83867_PHY is not set
> > +# CONFIG_VITESSE_PHY is not set
> > +# CONFIG_USB_BRCMSTB is not set
> > +CONFIG_USB_RTL8152=y
> > +CONFIG_USB_USBNET=y
> > +CONFIG_USB_NET_AX8817X=y
> > +CONFIG_USB_NET_AX88179_178A=y
> > +CONFIG_USB_NET_CDC_NCM=y
> > +CONFIG_USB_NET_NET1080=y
> > +CONFIG_USB_NET_CDC_SUBSET=y
> > +CONFIG_USB_NET_ZAURUS=y
> > +CONFIG_BRCMFMAC=y
> > +CONFIG_HOSTAP=y
> > +CONFIG_RTL_CARDS=y
> > +# CONFIG_ATH10K is not set
> > +# CONFIG_ATH10K_PCI is not set
> > +# CONFIG_ATH10K_SNOC is not set
> > +# CONFIG_WCN36XX is not set
> > +# CONFIG_MWIFIEX is not set
> > +# CONFIG_MWIFIEX_SDIO is not set
> > +# CONFIG_MWIFIEX_PCIE is not set
> > +CONFIG_KEYBOARD_SNVS_PWRKEY=y
> > +# CONFIG_KEYBOARD_IMX_SC_KEY is not set
> > +# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set
> > +# CONFIG_INPUT_PM8941_PWRKEY is not set
> > +# CONFIG_INPUT_PM8XXX_VIBRATOR is not set
> > +# CONFIG_INPUT_PWM_BEEPER is not set
> > +# CONFIG_INPUT_PWM_VIBRA is not set
> > +# CONFIG_INPUT_HISI_POWERKEY is not set
> > +# CONFIG_VT_HW_CONSOLE_BINDING is not set
> > +# CONFIG_SERIAL_8250_BCM2835AUX is not set
> > +# CONFIG_SERIAL_8250_OMAP is not set
> > +# CONFIG_SERIAL_8250_MT6577 is not set
> > +# CONFIG_SERIAL_8250_UNIPHIER is not set
> > +# CONFIG_SERIAL_MESON is not set
> > +# CONFIG_SERIAL_MESON_CONSOLE is not set
> > +# CONFIG_SERIAL_SAMSUNG is not set
> > +# CONFIG_SERIAL_SAMSUNG_CONSOLE is not set
> > +# CONFIG_SERIAL_TEGRA is not set
> > +# CONFIG_SERIAL_TEGRA_TCU is not set
> > +# CONFIG_SERIAL_SH_SCI is not set
> > +# CONFIG_SERIAL_MSM is not set
> > +# CONFIG_SERIAL_MSM_CONSOLE is not set
> > +# CONFIG_SERIAL_QCOM_GENI is not set
> > +# CONFIG_SERIAL_QCOM_GENI_CONSOLE is not set
> > +# CONFIG_SERIAL_MVEBU_UART is not set
> > +# CONFIG_SERIAL_OWL is not set
> > +# CONFIG_I2C_MUX is not set
> > +# CONFIG_I2C_BCM2835 is not set
> > +# CONFIG_I2C_MESON is not set
> > +# CONFIG_I2C_MT65XX is not set
> > +# CONFIG_I2C_MV64XXX is not set
> > +# CONFIG_I2C_OMAP is not set
> > +# CONFIG_I2C_OWL is not set
> > +# CONFIG_I2C_PXA is not set
> > +# CONFIG_I2C_QCOM_CCI is not set
> > +# CONFIG_I2C_QCOM_GENI is not set
> > +# CONFIG_I2C_QUP is not set
> > +# CONFIG_I2C_RIIC is not set
> > +# CONFIG_I2C_S3C2410 is not set
> > +# CONFIG_I2C_SH_MOBILE is not set
> > +# CONFIG_I2C_TEGRA is not set
> > +# CONFIG_I2C_UNIPHIER_F is not set
> > +# CONFIG_I2C_RCAR is not set
> > +# CONFIG_SPI_ARMADA_3700 is not set
> > +# CONFIG_SPI_BCM2835 is not set
> > +# CONFIG_SPI_BCM2835AUX is not set
> > +# CONFIG_SPI_DESIGNWARE is not set
> > +# CONFIG_SPI_DW_DMA is not set
> > +# CONFIG_SPI_DW_MMIO is not set
> > +CONFIG_SPI_IMX=y
> > +# CONFIG_SPI_FSL_DSPI is not set
> > +# CONFIG_SPI_MESON_SPICC is not set
> > +# CONFIG_SPI_MESON_SPIFC is not set
> > +# CONFIG_SPI_ORION is not set
> > +CONFIG_SPI_SPIDEV=y
> > +CONFIG_SPI_SLAVE=y
> > +CONFIG_SPI_SLAVE_TIME=y
> > +CONFIG_SPI_SLAVE_SYSTEM_CONTROL=y
> > +CONFIG_PINCTRL=y
> > +# CONFIG_SPI_RPCIF is not set
> > +# CONFIG_SPI_RSPI is not set
> > +# CONFIG_SPI_QCOM_QSPI is not set
> > +# CONFIG_SPI_QUP is not set
> > +# CONFIG_SPI_QCOM_GENI is not set
> > +# CONFIG_SPI_S3C64XX is not set
> > +# CONFIG_SPI_SH_MSIOF is not set
> > +# CONFIG_SPI_SUN6I is not set
> > +# CONFIG_SPMI is not set
> > +# CONFIG_PINCTRL_OWL is not set
> > +# CONFIG_PINCTRL_S700 is not set
> > +# CONFIG_PINCTRL_S900 is not set
> > +CONFIG_GPIOLIB=y
> > +# CONFIG_PINCTRL_MSM is not set
> > +# CONFIG_PINCTRL_IPQ8074 is not set
> > +# CONFIG_PINCTRL_IPQ6018 is not set
> > +# CONFIG_PINCTRL_MSM8916 is not set
> > +# CONFIG_PINCTRL_MSM8994 is not set
> > +# CONFIG_PINCTRL_MSM8996 is not set
> > +# CONFIG_PINCTRL_MSM8998 is not set
> > +# CONFIG_PINCTRL_QCS404 is not set
> > +# CONFIG_PINCTRL_QDF2XXX is not set
> > +# CONFIG_PINCTRL_QCOM_SPMI_PMIC is not set
> > +# CONFIG_PINCTRL_SC7180 is not set
> > +# CONFIG_PINCTRL_SC7280 is not set
> > +# CONFIG_PINCTRL_SDM845 is not set
> > +# CONFIG_PINCTRL_SM8150 is not set
> > +# CONFIG_PINCTRL_SM8250 is not set
> > +# CONFIG_PINCTRL_SM8350 is not set
> > +# CONFIG_PINCTRL_SM8450 is not set
> > +# CONFIG_PINCTRL_LPASS_LPI is not set
> > +# CONFIG_GPIO_DAVINCI is not set
> > +# CONFIG_GPIO_MAX77620 is not set
> > +# CONFIG_GPIO_MPC8XXX is not set
> > +# CONFIG_GPIO_RCAR is not set
> > +# CONFIG_GPIO_UNIPHIER is not set
> > +# CONFIG_GPIO_VISCONTI is not set
> > +# CONFIG_GPIO_XGENE_SB is not set
> > +# CONFIG_GPIO_SL28CPLD is not set
> > +CONFIG_POWER_RESET_BRCMSTB=y
> > +# CONFIG_POWER_RESET_MSM is not set
> > +# CONFIG_POWER_RESET_QCOM_PON is not set
> > +# CONFIG_BATTERY_MAX17042 is not set
> > +# CONFIG_CHARGER_BQ25890 is not set
> > +# CONFIG_CHARGER_BQ25980 is not set
> > +# CONFIG_SENSORS_JC42 is not set
> > +# CONFIG_SENSORS_LM75 is not set
> > +# CONFIG_SENSORS_RASPBERRYPI_HWMON is not set
> > +# CONFIG_SENSORS_SL28CPLD is not set
> > +CONFIG_THERMAL_WRITABLE_TRIPS=y
> > +CONFIG_IMX_SC_THERMAL=y
> > +CONFIG_IMX8MM_THERMAL=y
> > +CONFIG_QORIQ_THERMAL=y
> > +# CONFIG_SUN8I_THERMAL is not set
> > +# CONFIG_ROCKCHIP_THERMAL is not set
> > +# CONFIG_RCAR_THERMAL is not set
> > +# CONFIG_RCAR_GEN3_THERMAL is not set
> > +# CONFIG_RZG2L_THERMAL is not set
> > +# CONFIG_ARMADA_THERMAL is not set
> > +# CONFIG_BCM2711_THERMAL is not set
> > +# CONFIG_BCM2835_THERMAL is not set
> > +# CONFIG_BRCMSTB_THERMAL is not set
> > +# CONFIG_EXYNOS_THERMAL is not set
> > +# CONFIG_TEGRA_SOCTHERM is not set
> > +# CONFIG_TEGRA_BPMP_THERMAL is not set
> > +# CONFIG_QCOM_TSENS is not set
> > +# CONFIG_QCOM_SPMI_TEMP_ALARM is not set
> > +# CONFIG_QCOM_LMH is not set
> > +# CONFIG_UNIPHIER_THERMAL is not set
> > +# CONFIG_SL28CPLD_WATCHDOG is not set
> > +# CONFIG_S3C2410_WATCHDOG is not set
> > +# CONFIG_BCM7038_WDT is not set
> > +# CONFIG_SUNXI_WATCHDOG is not set
> > +CONFIG_IMX_SC_WDT=y
> > +CONFIG_IMX7ULP_WDT=y
> > +# CONFIG_QCOM_WDT is not set
> > +# CONFIG_MESON_GXBB_WATCHDOG is not set
> > +# CONFIG_MESON_WATCHDOG is not set
> > +# CONFIG_RENESAS_WDT is not set
> > +# CONFIG_RENESAS_RZG2LWDT is not set
> > +# CONFIG_UNIPHIER_WATCHDOG is not set
> > +# CONFIG_BCM2835_WDT is not set
> > +# CONFIG_MFD_ALTERA_SYSMGR is not set
> > +# CONFIG_MFD_AXP20X_RSB is not set
> > +# CONFIG_MFD_EXYNOS_LPASS is not set
> > +# CONFIG_MFD_HI655X_PMIC is not set
> > +# CONFIG_MFD_MT6397 is not set
> > +# CONFIG_MFD_SIMPLE_MFD_I2C is not set
> > +# CONFIG_MFD_SPMI_PMIC is not set
> > +# CONFIG_MFD_SL28CPLD is not set
> > +CONFIG_REGULATOR=y
> > +# CONFIG_REGULATOR_HI655X is not set
> > +# CONFIG_REGULATOR_MP8859 is not set
> > +# CONFIG_REGULATOR_MT6358 is not set
> > +# CONFIG_REGULATOR_MT6397 is not set
> > +# CONFIG_REGULATOR_PF8X00 is not set
> > +# CONFIG_REGULATOR_QCOM_RPMH is not set
> > +# CONFIG_REGULATOR_QCOM_SMD_RPM is not set
> > +# CONFIG_REGULATOR_QCOM_SPMI is not set
> > +# CONFIG_REGULATOR_TPS65132 is not set
> > +CONFIG_MEDIA_SUPPORT=y
> > +# CONFIG_RC_CORE is not set
> > +# CONFIG_RC_DECODERS is not set
> > +# CONFIG_RC_DEVICES is not set
> > +# CONFIG_IR_MESON is not set
> > +# CONFIG_IR_SUNXI is not set
> > +CONFIG_SDR_PLATFORM_DRIVERS=y
> > +# CONFIG_VIDEO_QCOM_CAMSS is not set
> > +# CONFIG_VIDEO_RCAR_CSI2 is not set
> > +# CONFIG_VIDEO_RCAR_VIN is not set
> > +# CONFIG_VIDEO_SUN6I_CSI is not set
> > +# CONFIG_VIDEO_RCAR_ISP is not set
> > +# CONFIG_VIDEO_SAMSUNG_S5P_JPEG is not set
> > +# CONFIG_VIDEO_SAMSUNG_S5P_MFC is not set
> > +# CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC is not set
> > +# CONFIG_VIDEO_RENESAS_FDP1 is not set
> > +# CONFIG_VIDEO_RENESAS_FCP is not set
> > +# CONFIG_VIDEO_RENESAS_VSP1 is not set
> > +# CONFIG_VIDEO_QCOM_VENUS is not set
> > +# CONFIG_VIDEO_RCAR_DRIF is not set
> > +CONFIG_VIDEO_OV5640=y
> > +CONFIG_DRM=y
> > +CONFIG_DRM_I2C_CH7006=m
> > +CONFIG_DRM_I2C_SIL164=m
> > +# CONFIG_DRM_NOUVEAU is not set
> > +# CONFIG_DRM_EXYNOS is not set
> > +# CONFIG_DRM_EXYNOS5433_DECON is not set
> > +# CONFIG_DRM_EXYNOS7_DECON is not set
> > +# CONFIG_DRM_EXYNOS_DSI is not set
> > +# CONFIG_DRM_EXYNOS_DP is not set
> > +# CONFIG_DRM_EXYNOS_HDMI is not set
> > +# CONFIG_DRM_EXYNOS_MIC is not set
> > +# CONFIG_DRM_ROCKCHIP is not set
> > +# CONFIG_ROCKCHIP_ANALOGIX_DP is not set
> > +# CONFIG_ROCKCHIP_CDN_DP is not set
> > +# CONFIG_ROCKCHIP_DW_HDMI is not set
> > +# CONFIG_ROCKCHIP_DW_MIPI_DSI is not set
> > +# CONFIG_ROCKCHIP_INNO_HDMI is not set
> > +# CONFIG_ROCKCHIP_LVDS is not set
> > +# CONFIG_DRM_RCAR_DU is not set
> > +# CONFIG_DRM_RCAR_USE_LVDS is not set
> > +# CONFIG_DRM_RCAR_MIPI_DSI is not set
> > +# CONFIG_DRM_SUN4I is not set
> > +# CONFIG_DRM_SUN6I_DSI is not set
> > +# CONFIG_DRM_SUN8I_DW_HDMI is not set
> > +# CONFIG_DRM_SUN8I_MIXER is not set
> > +# CONFIG_DRM_MSM is not set
> > +# CONFIG_DRM_TEGRA is not set
> > +# CONFIG_DRM_PANEL_BOE_TV101WUM_NL6 is not set
> > +# CONFIG_DRM_PANEL_LVDS is not set
> > +# CONFIG_DRM_PANEL_SIMPLE is not set
> > +# CONFIG_DRM_PANEL_EDP is not set
> > +# CONFIG_DRM_PANEL_MANTIX_MLAF057WE51 is not set
> > +# CONFIG_DRM_PANEL_RAYDIUM_RM67191 is not set
> > +# CONFIG_DRM_PANEL_SITRONIX_ST7703 is not set
> > +CONFIG_DRM_DISPLAY_CONNECTOR=m
> > +# CONFIG_DRM_LONTIUM_LT8912B is not set
> > +CONFIG_DRM_NWL_MIPI_DSI=y
> > +# CONFIG_DRM_LONTIUM_LT9611UXC is not set
> > +# CONFIG_DRM_PARADE_PS8640 is not set
> > +CONFIG_DRM_I2C_ADV7511=y
> > +CONFIG_DRM_DW_HDMI_I2S_AUDIO=m
> > +CONFIG_DRM_IMX_DCSS=y
> > +# CONFIG_DRM_VC4 is not set
> > +# CONFIG_DRM_HISI_HIBMC is not set
> > +CONFIG_DRM_MXSFB=y
> > +# CONFIG_DRM_MEDIATEK is not set
> > +# CONFIG_DRM_MEDIATEK_HDMI is not set
> > +# CONFIG_DRM_MESON is not set
> > +CONFIG_DRM_LEGACY=y
> > +# CONFIG_FB is not set
> > +# CONFIG_FB_MODE_HELPERS is not set
> > +# CONFIG_FB_EFI is not set
> > +# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
> > +# CONFIG_BACKLIGHT_PWM is not set
> > +# CONFIG_BACKLIGHT_LP855X is not set
> > +# CONFIG_LOGO is not set
> > +# CONFIG_SND_SPI is not set
> > +# CONFIG_SND_USB is not set
> > +CONFIG_SND_DYNAMIC_MINORS=y
> > +CONFIG_SND_ALOOP=m
> > +# CONFIG_SND_HDA_TEGRA is not set
> > +# CONFIG_SND_HDA_CODEC_HDMI is not set
> > +CONFIG_SND_SOC_FSL_ASRC=y
> > +# CONFIG_SND_SOC_FSL_AUDMIX is not set
> > +# CONFIG_SND_SOC_FSL_SPDIF is not set
> > +CONFIG_SND_SOC_FSL_EASRC=y
> > +CONFIG_SND_IMX_SOC=y
> > +CONFIG_SND_SOC_FSL_ASOC_CARD=y
> > +CONFIG_SND_SOC_SOF_TOPLEVEL=y
> > +CONFIG_SND_SOC_SOF_OF=m
> > +CONFIG_SND_SOC_SOF_IMX_TOPLEVEL=y
> > +CONFIG_SND_SOC_AK4458=y
> > +CONFIG_SND_SOC_AK5558=y
> > +CONFIG_SND_SOC_PCM512x_I2C=y
> > +CONFIG_SND_SIMPLE_CARD=y
> > +CONFIG_SND_AUDIO_GRAPH_CARD=y
> > +CONFIG_USB_CONN_GPIO=y
> > +# CONFIG_SND_BCM2835_SOC_I2S is not set
> > +# CONFIG_SND_SOC_CROS_EC_CODEC is not set
> > +# CONFIG_SND_SOC_DMIC is not set
> > +# CONFIG_SND_SOC_FSL_MICFIL is not set
> > +# CONFIG_SND_SOC_IMX_SGTL5000 is not set
> > +# CONFIG_SND_SOC_IMX_SPDIF is not set
> > +# CONFIG_SND_SOC_IMX_AUDMIX is not set
> > +# CONFIG_SND_MESON_AXG_SOUND_CARD is not set
> > +# CONFIG_SND_MESON_GX_SOUND_CARD is not set
> > +# CONFIG_SND_SOC_QCOM is not set
> > +# CONFIG_SND_SOC_APQ8016_SBC is not set
> > +# CONFIG_SND_SOC_MSM8996 is not set
> > +# CONFIG_SND_SOC_MAX98357A is not set
> > +# CONFIG_SND_SOC_MAX98927 is not set
> > +# CONFIG_SND_SOC_SDM845 is not set
> > +# CONFIG_SND_SOC_SM8250 is not set
> > +# CONFIG_SND_SOC_ROCKCHIP is not set
> > +# CONFIG_SND_SOC_ROCKCHIP_SPDIF is not set
> > +# CONFIG_SND_SOC_ROCKCHIP_RT5645 is not set
> > +# CONFIG_SND_SOC_RK3399_GRU_SOUND is not set
> > +# CONFIG_SND_SOC_SAMSUNG is not set
> > +# CONFIG_SND_SOC_RCAR is not set
> > +# CONFIG_SND_SOC_RZ is not set
> > +# CONFIG_SND_SOC_SGTL5000 is not set
> > +# CONFIG_SND_SOC_SPDIF is not set
> > +# CONFIG_SND_SUN4I_I2S is not set
> > +# CONFIG_SND_SUN4I_SPDIF is not set
> > +# CONFIG_SND_SOC_TEGRA is not set
> > +# CONFIG_SND_SOC_TEGRA210_AHUB is not set
> > +# CONFIG_SND_SOC_TEGRA210_DMIC is not set
> > +# CONFIG_SND_SOC_TEGRA210_I2S is not set
> > +# CONFIG_SND_SOC_TEGRA186_DSPK is not set
> > +# CONFIG_SND_SOC_TEGRA210_ADMAIF is not set
> > +# CONFIG_SND_SOC_TEGRA210_MVC is not set
> > +# CONFIG_SND_SOC_TEGRA210_SFC is not set
> > +# CONFIG_SND_SOC_TEGRA210_AMX is not set
> > +# CONFIG_SND_SOC_TEGRA210_ADX is not set
> > +# CONFIG_SND_SOC_TEGRA210_MIXER is not set
> > +# CONFIG_SND_SOC_TEGRA_AUDIO_GRAPH_CARD is not set
> > +# CONFIG_SND_SOC_AK4613 is not set
> > +# CONFIG_SND_SOC_ES7134 is not set
> > +# CONFIG_SND_SOC_ES7241 is not set
> > +# CONFIG_SND_SOC_GTM601 is not set
> > +# CONFIG_SND_SOC_MSM8916_WCD_ANALOG is not set
> > +# CONFIG_SND_SOC_MSM8916_WCD_DIGITAL is not set
> > +# CONFIG_SND_SOC_PCM3168A_I2C is not set
> > +# CONFIG_SND_SOC_RT5659 is not set
> > +# CONFIG_SND_SOC_SIMPLE_AMPLIFIER is not set
> > +# CONFIG_SND_SOC_SIMPLE_MUX is not set
> > +# CONFIG_SND_SOC_TAS571X is not set
> > +# CONFIG_SND_SOC_TLV320AIC32X4_I2C is not set
> > +# CONFIG_SND_SOC_WCD934X is not set
> > +# CONFIG_SND_SOC_WM8904 is not set
> > +# CONFIG_SND_SOC_WM8960 is not set
> > +# CONFIG_SND_SOC_WM8962 is not set
> > +# CONFIG_SND_SOC_WM8978 is not set
> > +# CONFIG_SND_SOC_WSA881X is not set
> > +# CONFIG_SND_SOC_NAU8822 is not set
> > +# CONFIG_SND_SOC_LPASS_WSA_MACRO is not set
> > +# CONFIG_SND_SOC_LPASS_VA_MACRO is not set
> > +# CONFIG_SND_AUDIO_GRAPH_CARD2 is not set
> > +# CONFIG_HID_MULTITOUCH is not set
> > +# CONFIG_I2C_HID_ACPI is not set
> > +# CONFIG_I2C_HID_OF is not set
> > +# CONFIG_USB_XHCI_PCI_RENESAS is not set
> > +# CONFIG_USB_XHCI_TEGRA is not set
> > +# CONFIG_USB_EHCI_EXYNOS is not set
> > +# CONFIG_USB_OHCI_EXYNOS is not set
> > +CONFIG_USB_HCD_TEST_MODE=y
> > +# CONFIG_USB_RENESAS_USBHS_HCD is not set
> > +# CONFIG_USB_RENESAS_USBHS is not set
> > +CONFIG_USB_UAS=y
> > +# CONFIG_USB_CDNS_SUPPORT is not set
> > +# CONFIG_USB_CDNS3 is not set
> > +# CONFIG_USB_CDNS3_GADGET is not set
> > +# CONFIG_USB_CDNS3_HOST is not set
> > +# CONFIG_USB_MTU3 is not set
> > +# CONFIG_USB_MUSB_SUNXI is not set
> > +CONFIG_USB_SERIAL=y
> > +CONFIG_USB_SERIAL_CONSOLE=y
> > +CONFIG_USB_SERIAL_GENERIC=y
> > +CONFIG_USB_SERIAL_SIMPLE=y
> > +CONFIG_USB_SERIAL_FTDI_SIO=y
> > +CONFIG_USB_TEST=m
> > +CONFIG_USB_EHSET_TEST_FIXTURE=y
> > +# CONFIG_USB_SERIAL_CP210X is not set
> > +# CONFIG_USB_SERIAL_OPTION is not set
> > +CONFIG_USB_MXS_PHY=y
> > +# CONFIG_REALTEK_PHY is not set
> > +CONFIG_USB_ULPI=y
> > +CONFIG_USB_SNP_UDC_PLAT=y
> > +CONFIG_USB_BDC_UDC=y
> > +CONFIG_USB_CONFIGFS=y
> > +# CONFIG_USB_RENESAS_USBHS_UDC is not set
> > +# CONFIG_USB_RENESAS_USB3 is not set
> > +# CONFIG_USB_TEGRA_XUDC is not set
> > +CONFIG_USB_CONFIGFS_F_LB_SS=y
> > +CONFIG_USB_CONFIGFS_F_UAC1=y
> > +CONFIG_USB_CONFIGFS_F_UAC1_LEGACY=y
> > +CONFIG_USB_CONFIGFS_F_UAC2=y
> > +CONFIG_USB_CONFIGFS_F_MIDI=y
> > +CONFIG_USB_CONFIGFS_F_HID=y
> > +CONFIG_USB_CONFIGFS_F_UVC=y
> > +CONFIG_USB_ZERO=m
> > +CONFIG_USB_AUDIO=m
> > +CONFIG_USB_ETH=m
> > +CONFIG_USB_MASS_STORAGE=m
> > +CONFIG_USB_G_SERIAL=m
> > +CONFIG_TYPEC=y
> > +CONFIG_TYPEC_TCPM=y
> > +CONFIG_TYPEC_TCPCI=y
> > +# CONFIG_TYPEC_TPS6598X is not set
> > +# CONFIG_MMC_SDHCI_ACPI is not set
> > +# CONFIG_MMC_SDHCI_TEGRA is not set
> > +# CONFIG_MMC_MESON_GX is not set
> > +# CONFIG_MMC_SDHCI_MSM is not set
> > +# CONFIG_MMC_SDHI is not set
> > +# CONFIG_MMC_UNIPHIER is not set
> > +# CONFIG_MMC_DW_ROCKCHIP is not set
> > +# CONFIG_MMC_SUNXI is not set
> > +# CONFIG_MMC_BCM2835 is not set
> > +# CONFIG_MMC_MTK is not set
> > +# CONFIG_MMC_OWL is not set
> > +# CONFIG_LEDS_LM3692X is not set
> > +# CONFIG_LEDS_PCA9532 is not set
> > +# CONFIG_EDAC_LAYERSCAPE is not set
> > +# CONFIG_RTC_DRV_HYM8563 is not set
> > +# CONFIG_RTC_DRV_PCF85063 is not set
> > +# CONFIG_RTC_DRV_M41T80 is not set
> > +# CONFIG_RTC_DRV_RV3028 is not set
> > +# CONFIG_RTC_DRV_FSL_FTM_ALARM is not set
> > +# CONFIG_RTC_DRV_S3C is not set
> > +CONFIG_RTC_DRV_SNVS=y
> > +CONFIG_RTC_DRV_IMX_SC=y
> > +# CONFIG_RTC_DRV_SUN6I is not set
> > +# CONFIG_RTC_DRV_ARMADA38X is not set
> > +# CONFIG_RTC_DRV_PM8XXX is not set
> > +# CONFIG_RTC_DRV_TEGRA is not set
> > +# CONFIG_RTC_DRV_XGENE is not set
> > +# CONFIG_RTC_DRV_MT6397 is not set
> > +CONFIG_BCM_SBA_RAID=m
> > +# CONFIG_DMA_BCM2835 is not set
> > +# CONFIG_DMA_SUN6I is not set
> > +CONFIG_FSL_QDMA=m
> > +CONFIG_IMX_SDMA=y
> > +# CONFIG_K3_DMA is not set
> > +# CONFIG_MV_XOR is not set
> > +CONFIG_MXS_DMA=y
> > +# CONFIG_OWL_DMA is not set
> > +# CONFIG_TEGRA186_GPC_DMA is not set
> > +# CONFIG_TEGRA20_APB_DMA is not set
> > +# CONFIG_TEGRA210_ADMA is not set
> > +# CONFIG_QCOM_BAM_DMA is not set
> > +CONFIG_DMATEST=y
> > +CONFIG_DMABUF_HEAPS=y
> > +CONFIG_DMABUF_HEAPS_SYSTEM=y
> > +CONFIG_DMABUF_HEAPS_CMA=y
> > +# CONFIG_RCAR_DMAC is not set
> > +# CONFIG_RENESAS_USB_DMAC is not set
> > +# CONFIG_RZ_DMAC is not set
> > +# CONFIG_TI_K3_UDMA is not set
> > +# CONFIG_TI_K3_UDMA_GLUE_LAYER is not set
> > +# CONFIG_VFIO_PCI is not set
> > +# CONFIG_VIRTIO_PCI is not set
> > +# CONFIG_XEN_GNTDEV is not set
> > +# CONFIG_XEN_GRANT_DEV_ALLOC is not set
> > +# CONFIG_VIDEO_HANTRO is not set
> > +# CONFIG_VIDEO_IMX_MEDIA is not set
> > +CONFIG_CROS_EC_TYPEC=y
> > +# CONFIG_CLK_VEXPRESS_OSC is not set
> > +# CONFIG_COMMON_CLK_SCMI is not set
> > +# CONFIG_COMMON_CLK_FSL_SAI is not set
> > +CONFIG_COMMON_CLK_XGENE=y
> > +# CONFIG_COMMON_CLK_BD718XX is not set
> > +# CONFIG_CLK_RASPBERRYPI is not set
> > +# CONFIG_CLK_IMX8MM is not set
> > +# CONFIG_CLK_IMX8MP is not set
> > +# CONFIG_CLK_IMX8MQ is not set
> > +# CONFIG_CLK_IMX8QXP is not set
> > +# CONFIG_CLK_IMX8ULP is not set
> > +# CONFIG_TI_SCI_CLK is not set
> > +# CONFIG_COMMON_CLK_QCOM is not set
> > +# CONFIG_QCOM_A53PLL is not set
> > +# CONFIG_QCOM_CLK_APCS_MSM8916 is not set
> > +# CONFIG_QCOM_CLK_APCC_MSM8996 is not set
> > +# CONFIG_QCOM_CLK_SMD_RPM is not set
> > +# CONFIG_QCOM_CLK_RPMH is not set
> > +# CONFIG_IPQ_GCC_6018 is not set
> > +# CONFIG_IPQ_GCC_8074 is not set
> > +# CONFIG_MSM_GCC_8916 is not set
> > +# CONFIG_MSM_GCC_8994 is not set
> > +# CONFIG_MSM_MMCC_8996 is not set
> > +# CONFIG_MSM_GCC_8998 is not set
> > +# CONFIG_QCS_GCC_404 is not set
> > +# CONFIG_SC_GCC_7180 is not set
> > +# CONFIG_SC_GCC_7280 is not set
> > +# CONFIG_SDM_CAMCC_845 is not set
> > +# CONFIG_SDM_GPUCC_845 is not set
> > +# CONFIG_SDM_VIDEOCC_845 is not set
> > +# CONFIG_SDM_DISPCC_845 is not set
> > +# CONFIG_SM_GCC_8350 is not set
> > +# CONFIG_SM_GCC_8450 is not set
> > +# CONFIG_SM_GPUCC_8150 is not set
> > +# CONFIG_SM_GPUCC_8250 is not set
> > +# CONFIG_QCOM_HFPLL is not set
> > +# CONFIG_CLK_GFM_LPASS_SM8250 is not set
> > +# CONFIG_CLK_RCAR_USB2_CLOCK_SEL is not set
> > +# CONFIG_HWSPINLOCK_QCOM is not set
> > +# CONFIG_RENESAS_OSTM is not set
> > +# CONFIG_BCM2835_MBOX is not set
> > +# CONFIG_QCOM_APCS_IPC is not set
> > +# CONFIG_QCOM_IPCC is not set
> > +# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set
> > +# CONFIG_ROCKCHIP_IOMMU is not set
> > +# CONFIG_TEGRA_IOMMU_SMMU is not set
> > +# CONFIG_MTK_IOMMU is not set
> > +# CONFIG_QCOM_IOMMU is not set
> > +CONFIG_IMX_REMOTEPROC=y
> > +CONFIG_IMX_DSP_REMOTEPROC=y
> > +CONFIG_RPMSG_CHAR=y
> > +# CONFIG_QCOM_Q6V5_MSS is not set
> > +# CONFIG_QCOM_Q6V5_PAS is not set
> > +# CONFIG_QCOM_SYSMON is not set
> > +# CONFIG_QCOM_WCNSS_PIL is not set
> > +# CONFIG_RPMSG_QCOM_GLINK_SMEM is not set
> > +# CONFIG_RPMSG_QCOM_SMD is not set
> > +CONFIG_SOC_BRCMSTB=y
> > +# CONFIG_OWL_PM_DOMAINS is not set
> > +# CONFIG_RASPBERRYPI_POWER is not set
> > +# CONFIG_FSL_DPAA is not set
> > +# CONFIG_FSL_MC_DPIO is not set
> > +CONFIG_SOC_TI=y
> > +# CONFIG_DEVFREQ_GOV_USERSPACE is not set
> > +# CONFIG_MTK_DEVAPC is not set
> > +# CONFIG_MTK_PMIC_WRAP is not set
> > +# CONFIG_QCOM_AOSS_QMP is not set
> > +# CONFIG_QCOM_COMMAND_DB is not set
> > +# CONFIG_QCOM_CPR is not set
> > +# CONFIG_QCOM_GENI_SE is not set
> > +# CONFIG_QCOM_RMTFS_MEM is not set
> > +# CONFIG_QCOM_RPMH is not set
> > +# CONFIG_QCOM_RPMHPD is not set
> > +# CONFIG_QCOM_RPMPD is not set
> > +# CONFIG_QCOM_SMEM is not set
> > +# CONFIG_QCOM_SMD_RPM is not set
> > +# CONFIG_QCOM_SMP2P is not set
> > +# CONFIG_QCOM_SMSM is not set
> > +# CONFIG_QCOM_SOCINFO is not set
> > +# CONFIG_QCOM_STATS is not set
> > +# CONFIG_QCOM_WCNSS_CTRL is not set
> > +# CONFIG_QCOM_APR is not set
> > +# CONFIG_ARCH_R8A77995 is not set
> > +# CONFIG_ARCH_R8A77990 is not set
> > +# CONFIG_ARCH_R8A77950 is not set
> > +# CONFIG_ARCH_R8A77951 is not set
> > +# CONFIG_ARCH_R8A77965 is not set
> > +# CONFIG_ARCH_R8A77960 is not set
> > +# CONFIG_ARCH_R8A77961 is not set
> > +# CONFIG_ARCH_R8A779F0 is not set
> > +# CONFIG_ARCH_R8A77980 is not set
> > +# CONFIG_ARCH_R8A77970 is not set
> > +# CONFIG_ARCH_R8A779A0 is not set
> > +# CONFIG_ARCH_R8A774C0 is not set
> > +# CONFIG_ARCH_R8A774E1 is not set
> > +# CONFIG_ARCH_R8A774A1 is not set
> > +# CONFIG_ARCH_R8A774B1 is not set
> > +# CONFIG_ARCH_R9A07G044 is not set
> > +# CONFIG_ROCKCHIP_IODOMAIN is not set
> > +# CONFIG_ROCKCHIP_PM_DOMAINS is not set
> > +# CONFIG_ARCH_TEGRA_132_SOC is not set
> > +# CONFIG_ARCH_TEGRA_210_SOC is not set
> > +# CONFIG_ARCH_TEGRA_186_SOC is not set
> > +# CONFIG_ARCH_TEGRA_194_SOC is not set
> > +# CONFIG_ARCH_TEGRA_234_SOC is not set
> > +# CONFIG_TI_SCI_PM_DOMAINS is not set
> > +# CONFIG_ARM_IMX_BUS_DEVFREQ is not set
> > +# CONFIG_ARM_IMX8M_DDRC_DEVFREQ is not set
> > +CONFIG_MEMORY=y
> > +# CONFIG_RENESAS_RPCIF is not set
> > +CONFIG_IMX8QXP_ADC=y
> > +# CONFIG_EXYNOS_ADC is not set
> > +# CONFIG_QCOM_SPMI_VADC is not set
> > +# CONFIG_QCOM_SPMI_ADC5 is not set
> > +# CONFIG_ROCKCHIP_SARADC is not set
> > +# CONFIG_RZG2L_ADC is not set
> > +# CONFIG_TI_ADS1015 is not set
> > +CONFIG_IIO_ST_LSM6DSX=y
> > +# CONFIG_SENSORS_ISL29018 is not set
> > +# CONFIG_VCNL4000 is not set
> > +# CONFIG_IIO_ST_MAGN_3AXIS is not set
> > +# CONFIG_MPL3115 is not set
> > +# CONFIG_PWM_BCM2835 is not set
> > +# CONFIG_PWM_BRCMSTB is not set
> > +CONFIG_PWM_FSL_FTM=m
> > +CONFIG_PWM_IMX27=y
> > +# CONFIG_PWM_MESON is not set
> > +# CONFIG_PWM_MTK_DISP is not set
> > +# CONFIG_PWM_MEDIATEK is not set
> > +# CONFIG_PWM_RCAR is not set
> > +# CONFIG_PWM_RENESAS_TPU is not set
> > +# CONFIG_PWM_ROCKCHIP is not set
> > +# CONFIG_PWM_SAMSUNG is not set
> > +# CONFIG_PWM_SL28CPLD is not set
> > +# CONFIG_PWM_SUN4I is not set
> > +# CONFIG_PWM_TEGRA is not set
> > +# CONFIG_PWM_VISCONTI is not set
> > +# CONFIG_SL28CPLD_INTC is not set
> > +# CONFIG_QCOM_PDC is not set
> > +# CONFIG_RESET_QCOM_AOSS is not set
> > +# CONFIG_RESET_QCOM_PDC is not set
> > +# CONFIG_RESET_RZG2L_USBPHY_CTRL is not set
> > +# CONFIG_RESET_TI_SCI is not set
> > +CONFIG_PHY_CADENCE_SALVO=y
> > +CONFIG_PHY_MIXEL_MIPI_DPHY=y
> > +# CONFIG_PHY_SUN4I_USB is not set
> > +# CONFIG_PHY_CADENCE_SIERRA is not set
> > +# CONFIG_PHY_FSL_IMX8M_PCIE is not set
> > +# CONFIG_PHY_HI6220_USB is not set
> > +# CONFIG_PHY_HISTB_COMBPHY is not set
> > +# CONFIG_PHY_HISI_INNO_USB2 is not set
> > +# CONFIG_PHY_MVEBU_CP110_COMPHY is not set
> > +# CONFIG_PHY_MTK_TPHY is not set
> > +# CONFIG_PHY_QCOM_QMP is not set
> > +# CONFIG_PHY_QCOM_QUSB2 is not set
> > +CONFIG_PHY_SAMSUNG_USB2=y
> > +# CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2 is not set
> > +# CONFIG_PHY_RCAR_GEN3_PCIE is not set
> > +# CONFIG_PHY_RCAR_GEN3_USB2 is not set
> > +# CONFIG_PHY_RCAR_GEN3_USB3 is not set
> > +# CONFIG_PHY_ROCKCHIP_EMMC is not set
> > +# CONFIG_PHY_ROCKCHIP_INNO_HDMI is not set
> > +# CONFIG_PHY_ROCKCHIP_INNO_USB2 is not set
> > +# CONFIG_PHY_ROCKCHIP_INNO_DSIDPHY is not set
> > +# CONFIG_PHY_ROCKCHIP_PCIE is not set
> > +# CONFIG_PHY_ROCKCHIP_TYPEC is not set
> > +# CONFIG_PHY_SAMSUNG_UFS is not set
> > +# CONFIG_PHY_UNIPHIER_USB2 is not set
> > +# CONFIG_PHY_UNIPHIER_USB3 is not set
> > +# CONFIG_PHY_TEGRA_XUSB is not set
> > +# CONFIG_PHY_AM654_SERDES is not set
> > +# CONFIG_PHY_J721E_WIZ is not set
> > +CONFIG_FSL_IMX8_DDR_PMU=y
> > +# CONFIG_QCOM_L2_PMU is not set
> > +# CONFIG_QCOM_L3_PMU is not set
> > +# CONFIG_MTK_EFUSE is not set
> > +# CONFIG_QCOM_QFPROM is not set
> > +# CONFIG_ROCKCHIP_EFUSE is not set
> > +# CONFIG_NVMEM_SUNXI_SID is not set
> > +# CONFIG_UNIPHIER_EFUSE is not set
> > +# CONFIG_MESON_EFUSE is not set
> > +# CONFIG_NVMEM_RMEM is not set
> > +# CONFIG_NVMEM_LAYERSCAPE_SFP is not set
> > +# CONFIG_FPGA_MGR_ALTERA_CVP is not set
> > +# CONFIG_FPGA_MGR_STRATIX10_SOC is not set
> > +# CONFIG_SLIM_QCOM_NGD_CTRL is not set
> > +# CONFIG_INTERCONNECT_IMX is not set
> > +# CONFIG_INTERCONNECT_IMX8MM is not set
> > +# CONFIG_INTERCONNECT_IMX8MN is not set
> > +# CONFIG_INTERCONNECT_IMX8MQ is not set
> > +# CONFIG_INTERCONNECT_QCOM is not set
> > +# CONFIG_INTERCONNECT_QCOM_MSM8916 is not set
> > +# CONFIG_INTERCONNECT_QCOM_OSM_L3 is not set
> > +# CONFIG_INTERCONNECT_QCOM_SC7280 is not set
> > +# CONFIG_INTERCONNECT_QCOM_SDM845 is not set
> > +# CONFIG_INTERCONNECT_QCOM_SM8150 is not set
> > +# CONFIG_INTERCONNECT_QCOM_SM8250 is not set
> > +# CONFIG_INTERCONNECT_QCOM_SM8350 is not set
> > +# CONFIG_INTERCONNECT_QCOM_SM8450 is not set
> > +# CONFIG_TMPFS_POSIX_ACL is not set
> > +# CONFIG_TMPFS_XATTR is not set
> > +CONFIG_JFFS2_FS=y
> > +CONFIG_UBIFS_FS=y
> > +CONFIG_SQUASHFS_XZ=y
> > +CONFIG_CRYPTO_USER=y
> > +CONFIG_CRYPTO_TEST=m
> > +CONFIG_CRYPTO_DH=m
> > +# CONFIG_CRYPTO_CURVE25519 is not set
> > +CONFIG_CRYPTO_CHACHA20POLY1305=m
> > +CONFIG_CRYPTO_CFB=m
> > +CONFIG_CRYPTO_CTS=m
> > +CONFIG_CRYPTO_LRW=m
> > +CONFIG_CRYPTO_OFB=m
> > +CONFIG_CRYPTO_PCBC=m
> > +CONFIG_CRYPTO_XCBC=m
> > +CONFIG_CRYPTO_VMAC=m
> > +CONFIG_CRYPTO_MD4=m
> > +CONFIG_CRYPTO_RMD160=m
> > +CONFIG_CRYPTO_STREEBOG=m
> > +CONFIG_CRYPTO_WP512=m
> > +CONFIG_CRYPTO_ANUBIS=m
> > +CONFIG_CRYPTO_ARC4=m
> > +CONFIG_CRYPTO_BLOWFISH=m
> > +CONFIG_CRYPTO_CAMELLIA=m
> > +CONFIG_CRYPTO_CAST5=m
> > +CONFIG_CRYPTO_CAST6=m
> > +CONFIG_CRYPTO_DES=m
> > +CONFIG_CRYPTO_FCRYPT=m
> > +CONFIG_CRYPTO_KHAZAD=m
> > +CONFIG_CRYPTO_SEED=m
> > +CONFIG_CRYPTO_SERPENT=m
> > +CONFIG_CRYPTO_TEA=m
> > +CONFIG_CRYPTO_TWOFISH=m
> > +CONFIG_CRYPTO_USER_API_HASH=m
> > +CONFIG_CRYPTO_USER_API_SKCIPHER=m
> > +CONFIG_CRYPTO_USER_API_AEAD=m
> > +# CONFIG_CRYPTO_DEV_SUN8I_CE is not set
> > +# CONFIG_CRYPTO_DEV_FSL_DPAA2_CAAM is not set
> > +# CONFIG_CRYPTO_DEV_QCOM_RNG is not set
> > +CONFIG_CRYPTO_DEV_AMLOGIC_GXL=m
> > +CONFIG_INDIRECT_PIO=y
> > +CONFIG_CRC_CCITT=m
> > +# CONFIG_CRC8 is not set
> > +# CONFIG_CRYPTO_DEV_HISI_SEC2 is not set
> > +# CONFIG_CRYPTO_DEV_HISI_ZIP is not set
> > +# CONFIG_CRYPTO_DEV_HISI_HPRE is not set
> > +# CONFIG_CRYPTO_DEV_HISI_TRNG is not set
> > +CONFIG_IRQ_POLL=y
> > +# CONFIG_DEBUG_INFO is not set
> > +# CONFIG_DEBUG_INFO_REDUCED is not set
> > +CONFIG_CORESIGHT=y
> > +CONFIG_CORESIGHT_LINK_AND_SINK_TMC=y
> > +CONFIG_CORESIGHT_SOURCE_ETM4X=y
>
> This fragment ^^^ must be shrinked with:
> $ make savedefconfig
> This way it should reduce a lot.
Done, the configuration has shrunk but not so much.
>
> > diff --git a/board/bsh/imx8mn-bsh-smm-s2/nand-full.lst b/board/bsh/imx8mn-bsh-smm-s2/nand-full.lst
> > new file mode 100644
> > index 000000000000..c01d2d6c1dac
> > --- /dev/null
> > +++ b/board/bsh/imx8mn-bsh-smm-s2/nand-full.lst
> > @@ -0,0 +1,29 @@
> > +# @_flash.bin | bootloader
> > +# @_image [_flash.bin] | image burn to nand, default is the same as bootloader
> > +# @_filesystem | filesystem to burn
> > +# @_kernel | kernel image
> > +# @_dtb | dtb image
> > +
> > +# This command will be run when ROM support stream mode
> > +# i.MX8QXP, i.MX8QM
> > +SDPS: boot -f _flash.bin
> > +
> > +FB: ucmd setenv fastboot_buffer ${loadaddr}
> > +FB: download -f _image
> > +# Burn image to nandfit partition if needed
> > +FB: ucmd if env exists nandfit_part; then nand erase.part nandfit; nand write ${fastboot_buffer} nandfit ${filesize}; else true; fi;
> > +FB: ucmd nandbcb init ${fastboot_buffer} nandboot ${filesize}
> > +
> > +FB[-t 10000]: ucmd ubi part nandrootfs
> > +FB[-t 10000]: ucmd ubi create root -
> > +FB: download -f _filesystem
> > +FB[-t 60000]: ucmd ubi write ${loadaddr} root ${filesize}
> > +
> > +FB: download -f _kernel
> > +FB[-t 10000]: ucmd nand write ${loadaddr} nandkernel ${filesize}
> > +
> > +FB: download -f _dtb
> > +FB[-t 8000]: ucmd nand write ${loadaddr} nanddtb ${filesize}
> > +
> > +FB: reboot
> > +FB: done
> > diff --git a/board/bsh/imx8mn-bsh-smm-s2/patches/linux/0001-dmaengine-mxs-use-platform_driver_register.patch b/board/bsh/imx8mn-bsh-smm-s2/patches/linux/0001-dmaengine-mxs-use-platform_driver_register.patch
> > new file mode 100644
> > index 000000000000..d19782656210
> > --- /dev/null
> > +++ b/board/bsh/imx8mn-bsh-smm-s2/patches/linux/0001-dmaengine-mxs-use-platform_driver_register.patch
> > @@ -0,0 +1,64 @@
> > +From fd270493d83fa97568f605552656f48c932d1237 Mon Sep 17 00:00:00 2001
> > +From: Dario Binacchi <dario.binacchi@amarulasolutions.com>
> > +Date: Sun, 22 May 2022 17:40:15 +0200
> > +Subject: [PATCH 1/2] dmaengine: mxs: use platform_driver_register
> > +
> > +Driver registration fails on SOC imx8mn as its supplier, the clock
> > +control module, is probed later than subsys initcall level. This driver
> > +uses platform_driver_probe which is not compatible with deferred probing
> > +and won't be probed again later if probe function fails due to clock not
> > +being available at that time.
> > +
> > +This patch replaces the use of platform_driver_probe with
> > +platform_driver_register which will allow probing the driver later again
> > +when the clock control module will be available.
> > +
> > +Fixes: a580b8c5429a ("dmaengine: mxs-dma: add dma support for i.MX23/28")
> > +Co-developed-by: Michael Trimarchi <michael@amarulasolutions.com>
> > +Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
> > +Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
> > +Cc: stable@vger.kernel.org
>
> Can you please indicate the upstream URL of the pending patch? For
> example a Patchwork link?
Ok
>
> Also, here you should add 3 dashes to avoid having the version history
> to fall into the final commit log.
OK
>
> > +
> > +Series-version: 5
> > +
> > +Series-changes: 5
> > +- Update the commit message.
> > +- Create a new patch to remove the warning generated by this patch.
> > +
> > +Series-changes: 4
> > +- Restore __init in front of mxs_dma_probe() definition.
> > +- Rename the mxs_dma_driver variable to mxs_dma_driver_probe.
> > +- Update the commit message.
> > +- Use builtin_platform_driver() instead of module_platform_driver().
> > +
> > +Series-changes: 3
> > +- Restore __init in front of mxs_dma_init() definition.
> > +
> > +Series-changes: 2
> > +- Add the tag "Cc: stable@vger.kernel.org" in the sign-off area.
> > +
> > +Series-cc: linux-amarula@amarulasolutions.com
> > +---
> > + drivers/dma/mxs-dma.c | 8 ++------
> > + 1 file changed, 2 insertions(+), 6 deletions(-)
> > +
> > +diff --git a/drivers/dma/mxs-dma.c b/drivers/dma/mxs-dma.c
> > +index 994fc4d2aca4..18f8154b859b 100644
> > +--- a/drivers/dma/mxs-dma.c
> > ++++ b/drivers/dma/mxs-dma.c
> > +@@ -839,10 +839,6 @@ static struct platform_driver mxs_dma_driver = {
> > + .name = "mxs-dma",
> > + .of_match_table = mxs_dma_dt_ids,
> > + },
> > ++ .probe = mxs_dma_probe,
> > + };
> > +-
> > +-static int __init mxs_dma_module_init(void)
> > +-{
> > +- return platform_driver_probe(&mxs_dma_driver, mxs_dma_probe);
> > +-}
> > +-subsys_initcall(mxs_dma_module_init);
> > ++builtin_platform_driver(mxs_dma_driver);
> > +--
> > +2.32.0
> > +
> > diff --git a/board/bsh/imx8mn-bsh-smm-s2/patches/linux/0002-dmaengine-mxs-fix-section-mismatch.patch b/board/bsh/imx8mn-bsh-smm-s2/patches/linux/0002-dmaengine-mxs-fix-section-mismatch.patch
> > new file mode 100644
> > index 000000000000..a307775c669b
> > --- /dev/null
> > +++ b/board/bsh/imx8mn-bsh-smm-s2/patches/linux/0002-dmaengine-mxs-fix-section-mismatch.patch
> > @@ -0,0 +1,35 @@
> > +From 145ee0b2e192da90348f1c77ea9c69ba7001159c Mon Sep 17 00:00:00 2001
> > +From: Dario Binacchi <dario.binacchi@amarulasolutions.com>
> > +Date: Tue, 12 Jul 2022 15:15:19 +0200
> > +Subject: [PATCH 2/2] dmaengine: mxs: fix section mismatch
> > +
> > +The patch was suggested by the following modpost warning:
> > +
> > +WARNING: modpost: vmlinux.o(.data+0xa3900): Section mismatch in reference from the variable mxs_dma_driver to the function .init.text:mxs_dma_probe()
> > +The variable mxs_dma_driver references
> > +the function __init mxs_dma_probe()
> > +If the reference is valid then annotate the
> > +variable with __init* or __refdata (see linux/init.h) or name the variable:
> > +*_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console
> > +
> > +Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
>
> Same here as above
Ok
>
> > +---
> > + drivers/dma/mxs-dma.c | 2 +-
> > + 1 file changed, 1 insertion(+), 1 deletion(-)
> > +
> > +diff --git a/drivers/dma/mxs-dma.c b/drivers/dma/mxs-dma.c
> > +index 18f8154b859b..a01953e06048 100644
> > +--- a/drivers/dma/mxs-dma.c
> > ++++ b/drivers/dma/mxs-dma.c
> > +@@ -834,7 +834,7 @@ static int __init mxs_dma_probe(struct platform_device *pdev)
> > + return 0;
> > + }
> > +
> > +-static struct platform_driver mxs_dma_driver = {
> > ++static struct platform_driver mxs_dma_driver __initdata = {
> > + .driver = {
> > + .name = "mxs-dma",
> > + .of_match_table = mxs_dma_dt_ids,
> > +--
> > +2.32.0
> > +
> > diff --git a/board/bsh/imx8mn-bsh-smm-s2/patches/uboot/0001-include-configs-Remove-rootwait-1-to-all-the-affecte.patch b/board/bsh/imx8mn-bsh-smm-s2/patches/uboot/0001-include-configs-Remove-rootwait-1-to-all-the-affecte.patch
> > new file mode 100644
> > index 000000000000..7ec8a97a0c9a
> > --- /dev/null
> > +++ b/board/bsh/imx8mn-bsh-smm-s2/patches/uboot/0001-include-configs-Remove-rootwait-1-to-all-the-affecte.patch
> > @@ -0,0 +1,159 @@
> > +From d818bfb185a9f62fc988141d2dbbf9e9bc8ffa5d Mon Sep 17 00:00:00 2001
> > +From: Michael Trimarchi <michael@amarulasolutions.com>
> > +Date: Sun, 22 May 2022 15:22:08 +0200
> > +Subject: [PATCH 06/10] include/configs: Remove rootwait=1 to all the affected
> > + boards
> > +
> > +rootwait=1 is not a valid kernel boot parameters. According
> > +to the documenation is only rootwait
> > +
> > +rootwait [KNL] Wait (indefinitely) for root device to show up.
> > + Useful for devices that are detected asynchronously
> > + (e.g. USB and MMC devices).
> > +
> > +Fix:
> > +Unknown kernel command line parameters "rootwait=1", will be passed to user space.
> > +
> > +Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
> > +Reviewed-by: Heiko Schocher <hs@denx.de>
>
> Ditto
OK
>
> > +---
> > + include/configs/am335x_evm.h | 2 +-
> > + include/configs/am43xx_evm.h | 2 +-
> > + include/configs/baltos.h | 2 +-
> > + include/configs/chiliboard.h | 2 +-
> > + include/configs/etamin.h | 2 +-
> > + include/configs/imx8mn_bsh_smm_s2.h | 2 +-
> > + include/configs/siemens-am33x-common.h | 4 ++--
> > + include/configs/ti_armv7_keystone2.h | 2 +-
> > + include/environment/ti/nand.h | 2 +-
> > + 9 files changed, 10 insertions(+), 10 deletions(-)
> > +
> > +diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
> > +index fd5b209a52db..f301a6dc835b 100644
> > +--- a/include/configs/am335x_evm.h
> > ++++ b/include/configs/am335x_evm.h
> > +@@ -34,7 +34,7 @@
> > + "root=${nandroot} " \
> > + "rootfstype=${nandrootfstype}\0" \
> > + "nandroot=ubi0:rootfs rw ubi.mtd=NAND.file-system,2048\0" \
> > +- "nandrootfstype=ubifs rootwait=1\0" \
> > ++ "nandrootfstype=ubifs rootwait\0" \
> > + "nandboot=echo Booting from nand ...; " \
> > + "run nandargs; " \
> > + "nand read ${fdtaddr} NAND.u-boot-spl-os; " \
> > +diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h
> > +index 5057441f7506..1f5c3cd04e88 100644
> > +--- a/include/configs/am43xx_evm.h
> > ++++ b/include/configs/am43xx_evm.h
> > +@@ -166,7 +166,7 @@
> > + "root=${nandroot} " \
> > + "rootfstype=${nandrootfstype}\0" \
> > + "nandroot=ubi0:rootfs rw ubi.mtd=NAND.file-system,4096\0" \
> > +- "nandrootfstype=ubifs rootwait=1\0" \
> > ++ "nandrootfstype=ubifs rootwait\0" \
> > + "nandboot=echo Booting from nand ...; " \
> > + "run nandargs; " \
> > + "nand read ${fdtaddr} NAND.u-boot-spl-os; " \
> > +diff --git a/include/configs/baltos.h b/include/configs/baltos.h
> > +index b881d8c03fd7..7b43741fde7c 100644
> > +--- a/include/configs/baltos.h
> > ++++ b/include/configs/baltos.h
> > +@@ -37,7 +37,7 @@
> > + "root=${nandroot} " \
> > + "rootfstype=${nandrootfstype}\0" \
> > + "nandroot=ubi0:rootfs rw ubi.mtd=5\0" \
> > +- "nandrootfstype=ubifs rootwait=1\0" \
> > ++ "nandrootfstype=ubifs rootwait\0" \
> > + "nandboot=echo Booting from nand ...; " \
> > + "run nandargs; " \
> > + "setenv loadaddr 0x84000000; " \
> > +diff --git a/include/configs/chiliboard.h b/include/configs/chiliboard.h
> > +index 82acda595f09..8bad0f9ac4b6 100644
> > +--- a/include/configs/chiliboard.h
> > ++++ b/include/configs/chiliboard.h
> > +@@ -20,7 +20,7 @@
> > + "root=${nandroot} " \
> > + "rootfstype=${nandrootfstype}\0" \
> > + "nandroot=ubi0:rootfs rw ubi.mtd=NAND.file-system\0" \
> > +- "nandrootfstype=ubifs rootwait=1\0" \
> > ++ "nandrootfstype=ubifs rootwait\0" \
> > + "nandboot=echo Booting from nand ...; " \
> > + "run nandargs; " \
> > + "nand read ${fdt_addr} NAND.u-boot-spl-os; " \
> > +diff --git a/include/configs/etamin.h b/include/configs/etamin.h
> > +index dc83ab71908b..3548382d2036 100644
> > +--- a/include/configs/etamin.h
> > ++++ b/include/configs/etamin.h
> > +@@ -113,7 +113,7 @@
> > + "nand_active_ubi_vol=rootfs_a\0" \
> > + "rootfs_name=rootfs\0" \
> > + "kernel_name=uImage\0"\
> > +- "nand_root_fs_type=ubifs rootwait=1\0" \
> > ++ "nand_root_fs_type=ubifs rootwait\0" \
> > + "nand_args=run bootargs_defaults;" \
> > + "mtdparts default;" \
> > + "setenv ${partitionset_active} true;" \
> > +diff --git a/include/configs/imx8mn_bsh_smm_s2.h b/include/configs/imx8mn_bsh_smm_s2.h
> > +index 098f23b206d1..f7529783692e 100644
> > +--- a/include/configs/imx8mn_bsh_smm_s2.h
> > ++++ b/include/configs/imx8mn_bsh_smm_s2.h
> > +@@ -21,7 +21,7 @@
> > + "root=${nandroot} " \
> > + "rootfstype=${nandrootfstype}\0" \
> > + "nandroot=ubi0:root rw ubi.mtd=nandrootfs\0" \
> > +- "nandrootfstype=ubifs rootwait=1\0" \
> > ++ "nandrootfstype=ubifs rootwait\0" \
> > + "nandboot=echo Booting from nand ...; " \
> > + "run nandargs; " \
> > + "nand read ${fdt_addr_r} nanddtb; " \
> > +diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h
> > +index 08c4d52d658f..9f1a6cd51b40 100644
> > +--- a/include/configs/siemens-am33x-common.h
> > ++++ b/include/configs/siemens-am33x-common.h
> > +@@ -237,7 +237,7 @@
> > + "nand_active_ubi_vol=rootfs_a\0" \
> > + "nand_active_ubi_vol_A=rootfs_a\0" \
> > + "nand_active_ubi_vol_B=rootfs_b\0" \
> > +- "nand_root_fs_type=ubifs rootwait=1\0" \
> > ++ "nand_root_fs_type=ubifs rootwait\0" \
> > + "nand_src_addr=0x280000\0" \
> > + "nand_src_addr_A=0x280000\0" \
> > + "nand_src_addr_B=0x780000\0" \
> > +@@ -314,7 +314,7 @@
> > + "nand_active_ubi_vol=rootfs_a\0" \
> > + "rootfs_name=rootfs\0" \
> > + "kernel_name=uImage\0"\
> > +- "nand_root_fs_type=ubifs rootwait=1\0" \
> > ++ "nand_root_fs_type=ubifs rootwait\0" \
> > + "nand_args=run bootargs_defaults;" \
> > + "mtdparts default;" \
> > + "setenv ${partitionset_active} true;" \
> > +diff --git a/include/configs/ti_armv7_keystone2.h b/include/configs/ti_armv7_keystone2.h
> > +index 57f013cbf846..133daecf7164 100644
> > +--- a/include/configs/ti_armv7_keystone2.h
> > ++++ b/include/configs/ti_armv7_keystone2.h
> > +@@ -180,7 +180,7 @@
> > + "sf write ${loadaddr} 0 ${filesize}\0" \
> > + "burn_uboot_nand=nand erase 0 0x100000; " \
> > + "nand write ${loadaddr} 0 ${filesize}\0" \
> > +- "args_all=setenv bootargs console=ttyS0,115200n8 rootwait=1 " \
> > ++ "args_all=setenv bootargs console=ttyS0,115200n8 rootwait " \
> > + KERNEL_MTD_PARTS \
> > + "args_net=setenv bootargs ${bootargs} rootfstype=nfs " \
> > + "root=/dev/nfs rw nfsroot=${serverip}:${nfs_root}," \
> > +diff --git a/include/environment/ti/nand.h b/include/environment/ti/nand.h
> > +index 11dcefcc41ca..7d00afa2b10f 100644
> > +--- a/include/environment/ti/nand.h
> > ++++ b/include/environment/ti/nand.h
> > +@@ -14,7 +14,7 @@
> > + "root=${nandroot} " \
> > + "rootfstype=${nandrootfstype}\0" \
> > + "nandroot=ubi0:rootfs rw ubi.mtd=NAND.file-system,2048\0" \
> > +- "nandrootfstype=ubifs rootwait=1\0" \
> > ++ "nandrootfstype=ubifs rootwait\0" \
> > + "nandboot=echo Booting from nand ...; " \
> > + "run nandargs; " \
> > + "nand read ${fdtaddr} NAND.u-boot-spl-os; " \
> > +--
> > +2.32.0
> > +
> > diff --git a/board/bsh/imx8mn-bsh-smm-s2/post-build.sh b/board/bsh/imx8mn-bsh-smm-s2/post-build.sh
> > new file mode 100755
> > index 000000000000..49df4cd6fb10
> > --- /dev/null
> > +++ b/board/bsh/imx8mn-bsh-smm-s2/post-build.sh
> > @@ -0,0 +1,4 @@
> > +#!/bin/sh
> > +BOARD_DIR="$(dirname $0)"
> > +
> > +cp ${BOARD_DIR}/nand-full.lst ${BINARIES_DIR}
> > diff --git a/board/bsh/imx8mn-bsh-smm-s2/readme.txt b/board/bsh/imx8mn-bsh-smm-s2/readme.txt
> > new file mode 100644
> > index 000000000000..37081091e849
> > --- /dev/null
> > +++ b/board/bsh/imx8mn-bsh-smm-s2/readme.txt
> > @@ -0,0 +1,75 @@
> > +i.MX8MN BSH SMM S2
> > +==================
> > +
> > +This tutorial describes how to use the predefined Buildroot
> > +configuration for the i.MX8MN BSH SMM S2 PRO board.
> > +
> > +Building
> > +--------
> > +
> > +Configure buildroot:
> > +
> > + $ make imx8mn_bsh_smm_s2_defconfig
> > +
> > +Change settings to fit your needs (optional):
> > +
> > + $ make menuconfig
> > +
> > +Compile everything and build the rootfs image:
> > +
> > + $ make
> > +
> > +
> > +Result of the build
> > +-------------------
> > +
> > +After building, the output/images directory contains:
> > +
> > + output/images/
> > + ├── bl31.bin
> > + ├── ddr3*
> > + ├── flash.bin
> > + ├── freescale/imx8mn-bsh-smm-s2.dtb
> > + ├── Image
> > + ├── nand-full.lst
> > + ├── rootfs.ext2
> > + ├── rootfs.ext4 -> rootfs.ext2
> > + ├── rootfs.tar
> > + ├── rootfs.ubifs
> > + ├── u-boot.bin
> > + └── u-boot-spl.bin
> > +
> > +
> > +Preparing the board
> > +-------------------
> > +
> > +Plug the USB type A to micro B cable into the USB Debug
> > +Connector (DBG UART). Use serial port settings 115200 8N1
> > +to access the debug console.
> > +
> > +Plug another USB type A to micro B cable into the USB-OTG
> > +Connector (USB1). This connection is used to flash the board
> > +firmware using the Freescale/NXP UUU tool.
> > +
> > +Connect the power supply/adaptor to the DC Power Jack (labelled
> > ++5V).
> > +
> > +
> > +Flashing
> > +--------
> > +
> > +Power up the board by switching on the Power ON Switch, which is
> > +placed right next to the DC Jack.
> > +
> > +Enter the following U-Boot commands on the debug serial console:
> > +
> > + $ nand erase.chip
> > + $ reset
> > +
> > +Flash the built images directly to board’s memory. On your computer,
> > +run:
> > +
> > + $ board/bsh/imx8mn-bsh-smm-s2/flash.sh output/
> > +
> > +It will flash the bootloader, the Device Tree Blob, the kernel image
> > +and the UBI root file system.
> > diff --git a/configs/imx8mn_bsh_smm_s2_defconfig b/configs/imx8mn_bsh_smm_s2_defconfig
> > new file mode 100644
> > index 000000000000..bf91afb73543
> > --- /dev/null
> > +++ b/configs/imx8mn_bsh_smm_s2_defconfig
> > @@ -0,0 +1,40 @@
> > +BR2_aarch64=y
> > +BR2_GLOBAL_PATCH_DIR="board/bsh/imx8mn-bsh-smm-s2/patches"
> > +BR2_TARGET_GENERIC_GETTY_PORT="ttymxc3"
> > +BR2_ROOTFS_POST_BUILD_SCRIPT="board/bsh/imx8mn-bsh-smm-s2/post-build.sh"
> > +BR2_LINUX_KERNEL=y
> > +BR2_LINUX_KERNEL_CUSTOM_VERSION=y
> > +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.18"
>
> Here ^^^ it would be better using the latest stable version of 5.18, at
> the moment it's 5.18.15, so testing again the resulting image with this
> Linux version.
I will update to 5.18.19, 5.18.15 introduced a regression in the nand
controller configuration and
therefore it was necessary to add an additional patch (The revert of a
revert !!!).
>
> > +BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
> > +BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/bsh/imx8mn-bsh-smm-s2/linux.fragment"
> > +BR2_LINUX_KERNEL_DTS_SUPPORT=y
> > +BR2_LINUX_KERNEL_INTREE_DTS_NAME="freescale/imx8mn-bsh-smm-s2"
> > +BR2_LINUX_KERNEL_DTB_KEEP_DIRNAME=y
> > +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
> > +BR2_PACKAGE_FREESCALE_IMX=y
> > +BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MN=y
> > +BR2_PACKAGE_FIRMWARE_IMX=y
> > +BR2_PACKAGE_FIRMWARE_IMX_DDR3=y
> > +BR2_TARGET_ROOTFS_UBIFS=y
> > +BR2_TARGET_ROOTFS_UBIFS_LEBSIZE=0x1f000
> > +BR2_TARGET_ROOTFS_UBIFS_RT_NONE=y
> > +BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
> > +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y
> > +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.5"
> > +BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="imx8mn"
> > +BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="IMX_BOOT_UART_BASE=0x30a60000"
> > +BR2_TARGET_ARM_TRUSTED_FIRMWARE_DEBUG=y
> > +BR2_TARGET_UBOOT=y
> > +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
> > +BR2_TARGET_UBOOT_CUSTOM_VERSION=y
> > +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.07"
> > +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="imx8mn_bsh_smm_s2"
> > +BR2_TARGET_UBOOT_NEEDS_DTC=y
> > +BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
> > +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
> > +BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
> > +BR2_TARGET_UBOOT_NEEDS_IMX_FIRMWARE=y
> > +BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
> > +BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="flash.bin"
> > +BR2_TARGET_UBOOT_SPL=y
> > +BR2_PACKAGE_HOST_UUU=y
>
> I've built successfully this defconfig using Buildroot's
> utils/docker-run so all host dependencies are met.
>
> I don't have the board but I've tried anyway to call:
> board/bsh/imx8mn-bsh-smm-s2/flash.sh output
> and of course it fails because there is not the board connected, but the
> error message is as follows:
> "
> terminate called after throwing an instance of 'std::runtime_error'
> what(): Call libusb_init failure
> board/bsh/imx8mn-bsh-smm-s2/flash.sh: line 25: 434921 Aborted
> (core dumped)
> "
> it seems something related to uuu package that doesn't deal with errors
> that well. It's acceptable but it could be good to improve uuu package
> to deal with that error in a more elegant way if you can.
I am not a docker expert, but it seems to me that proper handling of
USB is missing.
The exception is voluntarily thrown by uuu when the libusb_init call fails.
class CAutoDeInit
{
public:
CAutoDeInit()
{
if (libusb_init(nullptr) < 0)
throw runtime_error{ "Call libusb_init failure" };
}
I compiled the defconfig in buildroot, without docker, and with no
board connected the
uuu application does not raise that exception.
>
> Waiting for V4.
Soon,
thanks and regards
Dario
>
> Thank you All!
>
> Best regards
> --
> Giulio Benetti
> Benetti Engineering sas
--
Dario Binacchi
Embedded Linux Developer
dario.binacchi@amarulasolutions.com
__________________________________
Amarula Solutions SRL
Via Le Canevare 30, 31100 Treviso, Veneto, IT
T. +39 042 243 5310
info@amarulasolutions.com
www.amarulasolutions.com
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [Buildroot] [PATCH v3 2/2] configs/imx8mn_bsh_smm_s2_pro_defconfig: new defconfig
2022-07-29 21:26 ` Giulio Benetti
@ 2022-09-01 15:14 ` Dario Binacchi
0 siblings, 0 replies; 7+ messages in thread
From: Dario Binacchi @ 2022-09-01 15:14 UTC (permalink / raw)
To: Giulio Benetti
Cc: Ariel D'Alessandro, buildroot, Jagan Teki,
Ariel D'Alessandro, Heiko Thiery, Michael Trimarchi,
linux-amarula
Hi Giulio,
On Fri, Jul 29, 2022 at 11:26 PM Giulio Benetti
<giulio.benetti@benettiengineering.com> wrote:
>
> Hi Dario, Michael, Ariel, All,
>
> On 13/07/22 08:30, Dario Binacchi wrote:
> > From: Michael Trimarchi <michael@amarulasolutions.com>
> >
> > BSH SMM S2 PRO (SystemMaster S2 Pro) Board is an add-on board which
> > provide input and output interfaces to a dedicated carrier board. It is
> > designed mainly to provide graphical/video and connectivity interfaces
> > to the appliance.
> >
> > Board support package includes the following components:
> > - mainline Linux kernel 5.18
> > - mainline U-Boot 2022-07
> > - Default packages from buildroot
> >
> > https://www.apertis.org/reference_hardware/imx8mn_bsh_smm_s2pro_setup/
> >
> > Add Ariel D'Alessandro and Dario Binacchi as co-maintainer, we work
> > together on platform mainline
> >
> > Build and tested using:
> > docker pull registry.gitlab.com/buildroot.org/buildroot/base:20220105.2314
> >
> > Cc: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
> > Cc: Jagan Teki <jagan@amarulasolutions.com>
> > Cc: Heiko Thiery <heiko.thiery@gmail.com>
> > Cc: Giulio Benetti <giulio.benetti@benettiengineering.com>
> > Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
> > Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
> > Tested-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
> > Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
> > ---
> >
> > Changes in v3:
> > - Update the commit description.
> > - Bump U-Boot to version 2022-07.
> >
> > Changes in v2:
> > - Change commit subject line.
> > - Use the buildroot's output directory if the binaries directory is
> > not passed as a parameter to the `flash.sh' script.
> > - Replace the linux.config file with an architectural defconfig and
> > a config fragment for the changes.
> >
> > Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
> > ---
> > DEVELOPERS | 4 +
> > .../imx8mn-bsh-smm-s2/linux.fragment | 0
> > board/bsh/imx8mn-bsh-smm-s2-pro/extlinux.conf | 4 +
> > board/bsh/imx8mn-bsh-smm-s2-pro/flash.sh | 23 ++++++
> > board/bsh/imx8mn-bsh-smm-s2-pro/genimage.cfg | 17 +++++
> > board/bsh/imx8mn-bsh-smm-s2-pro/post-build.sh | 7 ++
> > board/bsh/imx8mn-bsh-smm-s2-pro/post-image.sh | 3 +
> > board/bsh/imx8mn-bsh-smm-s2-pro/readme.txt | 73 +++++++++++++++++++
> > configs/imx8mn_bsh_smm_s2_defconfig | 2 +-
> > configs/imx8mn_bsh_smm_s2_pro_defconfig | 41 +++++++++++
> > 10 files changed, 173 insertions(+), 1 deletion(-)
> > rename board/bsh/{ => common}/imx8mn-bsh-smm-s2/linux.fragment (100%)
> > create mode 100644 board/bsh/imx8mn-bsh-smm-s2-pro/extlinux.conf
> > create mode 100755 board/bsh/imx8mn-bsh-smm-s2-pro/flash.sh
> > create mode 100644 board/bsh/imx8mn-bsh-smm-s2-pro/genimage.cfg
> > create mode 100755 board/bsh/imx8mn-bsh-smm-s2-pro/post-build.sh
> > create mode 100755 board/bsh/imx8mn-bsh-smm-s2-pro/post-image.sh
> > create mode 100644 board/bsh/imx8mn-bsh-smm-s2-pro/readme.txt
> > create mode 100644 configs/imx8mn_bsh_smm_s2_pro_defconfig
> >
> > diff --git a/DEVELOPERS b/DEVELOPERS
> > index 33a77f462166..b6eebfc5fa84 100644
> > --- a/DEVELOPERS
> > +++ b/DEVELOPERS
> > @@ -215,6 +215,8 @@ F: configs/snps_archs38_haps_defconfig
> > F: configs/snps_archs38_hsdk_defconfig
> >
> > N: Ariel D'Alessandro <ariel@vanguardiasur.com.ar>
> > +F: board/bsh/
> > +F: configs/imx8mn_bsh_smm_s2_pro_defconfig
> > F: package/axfsutils/
> > F: package/mali-t76x/
> >
> > @@ -659,6 +661,7 @@ F: package/xinetd/
> > N: Dario Binacchi <dario.binacchi@amarulasolutions.com>
> > F: board/bsh/
> > F: configs/imx8mn_bsh_smm_s2_defconfig
> > +F: configs/imx8mn_bsh_smm_s2_pro_defconfig
> > F: package/uuu/
> >
> > N: Dario Binacchi <dariobin@libero.it>
> > @@ -2049,6 +2052,7 @@ F: package/python-pyzmq/
> > N: Michael Trimarchi <michael@amarulasolutions.com>
> > F: board/bsh/
> > F: configs/imx8mn_bsh_smm_s2_defconfig
> > +F: configs/imx8mn_bsh_smm_s2_pro_defconfig
> > F: package/python-spidev/
> >
> > N: Michael Vetter <jubalh@iodoru.org>
> > diff --git a/board/bsh/imx8mn-bsh-smm-s2/linux.fragment b/board/bsh/common/imx8mn-bsh-smm-s2/linux.fragment
> > similarity index 100%
> > rename from board/bsh/imx8mn-bsh-smm-s2/linux.fragment
> > rename to board/bsh/common/imx8mn-bsh-smm-s2/linux.fragment
> > diff --git a/board/bsh/imx8mn-bsh-smm-s2-pro/extlinux.conf b/board/bsh/imx8mn-bsh-smm-s2-pro/extlinux.conf
> > new file mode 100644
> > index 000000000000..911135474253
> > --- /dev/null
> > +++ b/board/bsh/imx8mn-bsh-smm-s2-pro/extlinux.conf
> > @@ -0,0 +1,4 @@
> > +label buildroot
> > + kernel /boot/Image
> > + devicetree /boot/freescale/imx8mn-bsh-smm-s2pro.dtb
> > + append root=PARTUUID=%PARTUUID% rootwait rw
> > diff --git a/board/bsh/imx8mn-bsh-smm-s2-pro/flash.sh b/board/bsh/imx8mn-bsh-smm-s2-pro/flash.sh
> > new file mode 100755
> > index 000000000000..17b20f009771
> > --- /dev/null
> > +++ b/board/bsh/imx8mn-bsh-smm-s2-pro/flash.sh
> > @@ -0,0 +1,23 @@
> > +#!/bin/bash
> > +
> > +if [ $# -eq 0 ]; then
> > + OUTPUT_DIR=output
> > +else
> > + OUTPUT_DIR=$1
> > +fi
> > +
> > +if ! test -d "${OUTPUT_DIR}" ; then
> > + echo "ERROR: no output directory specified."
> > + echo "Usage: $0 OUTPUT_DIR"
> > + echo ""
> > + echo "Arguments:"
> > + echo " OUTPUT_DIR The Buildroot output directory."
> > + exit 1
> > +fi
> > +
> > +IMAGES_DIR=${OUTPUT_DIR}/images
> > +
> > +${OUTPUT_DIR}/host/bin/uuu -v -b emmc_all \
> > + ${IMAGES_DIR}/flash.bin \
> > + ${IMAGES_DIR}/sdcard.img
> > +
> > diff --git a/board/bsh/imx8mn-bsh-smm-s2-pro/genimage.cfg b/board/bsh/imx8mn-bsh-smm-s2-pro/genimage.cfg
> > new file mode 100644
> > index 000000000000..bc100b171dd6
> > --- /dev/null
> > +++ b/board/bsh/imx8mn-bsh-smm-s2-pro/genimage.cfg
> > @@ -0,0 +1,17 @@
> > +image sdcard.img {
> > + hdimage {
> > + partition-table-type = "gpt"
> > + }
> > +
> > + partition imx-boot {
> > + in-partition-table = "no"
> > + image = "flash.bin"
> > + offset = 33K
> > + }
> > +
> > + partition rootfs {
> > + offset = 8M
> > + image = "rootfs.ext4"
> > + partition-uuid = %PARTUUID%
> > + }
> > +}
> > diff --git a/board/bsh/imx8mn-bsh-smm-s2-pro/post-build.sh b/board/bsh/imx8mn-bsh-smm-s2-pro/post-build.sh
> > new file mode 100755
> > index 000000000000..bf8861f6a914
> > --- /dev/null
> > +++ b/board/bsh/imx8mn-bsh-smm-s2-pro/post-build.sh
> > @@ -0,0 +1,7 @@
> > +#!/bin/sh
> > +BOARD_DIR="$(dirname $0)"
> > +PARTUUID="$($HOST_DIR/bin/uuidgen)"
> > +
> > +install -d "$TARGET_DIR/boot/extlinux/"
> > +sed "s/%PARTUUID%/$PARTUUID/g" "$BOARD_DIR/extlinux.conf" > "$TARGET_DIR/boot/extlinux/extlinux.conf"
> > +sed "s/%PARTUUID%/$PARTUUID/g" "$BOARD_DIR/genimage.cfg" > "$BINARIES_DIR/genimage.cfg"
> > diff --git a/board/bsh/imx8mn-bsh-smm-s2-pro/post-image.sh b/board/bsh/imx8mn-bsh-smm-s2-pro/post-image.sh
> > new file mode 100755
> > index 000000000000..3452fd4501f8
> > --- /dev/null
> > +++ b/board/bsh/imx8mn-bsh-smm-s2-pro/post-image.sh
> > @@ -0,0 +1,3 @@
> > +#!/bin/sh
> > +
> > +support/scripts/genimage.sh -c ${BINARIES_DIR}/genimage.cfg
> > diff --git a/board/bsh/imx8mn-bsh-smm-s2-pro/readme.txt b/board/bsh/imx8mn-bsh-smm-s2-pro/readme.txt
> > new file mode 100644
> > index 000000000000..5763f164fe13
> > --- /dev/null
> > +++ b/board/bsh/imx8mn-bsh-smm-s2-pro/readme.txt
> > @@ -0,0 +1,73 @@
> > +i.MX8MN BSH SMM S2 PRO
> > +======================
> > +
> > +How to build it
> > +---------------
> > +
> > +Configure buildroot:
> > +
> > + $ make imx8mn_bsh_smm_s2_pro_defconfig
> > +
> > +Change settings to fit your needs (optional):
> > +
> > + $ make menuconfig
> > +
> > +Compile everything and build the rootfs image:
> > +
> > + $ make
> > +
> > +
> > +Result of the build
> > +-------------------
> > +
> > +After building, the output/images directory contains:
> > +
> > + output/images/
> > + ├── bl31.bin
> > + ├── Image
> > + ├── flash.bin
> > + ├── ddr3*
> > + ├── rootfs.ext2
> > + ├── rootfs.ext4 -> rootfs.ext2
> > + ├── rootfs.tar
> > + ├── sdcard.img
> > + ├── u-boot.bin
> > + ├── u-boot-nodtb.bin
> > + └── u-boot-spl.bin
> > +
> > +
> > +Preparing the board
> > +-------------------
> > +
> > +Plug the USB type A to micro B cable into the USB Debug
> > +Connector (DBG UART). Use serial port settings 115200 8N1
> > +to access the debug console.
> > +
> > +Plug another USB type A to micro B cable into the USB-OTG
> > +Connector (USB1). This connection is used to flash the board
> > +firmware using the Freescale/NXP UUU tool.
> > +
> > +Connect the power supply/adaptor to the DC Power Jack (labelled
> > ++5V).
> > +
> > +
> > +Flashing the emmc card image
> > +----------------------------
> > +
> > +Power up the board by switching on the Power ON Switch, which is
> > +placed right next to the DC Jack.
> > +
> > +Enter the following U-Boot commands on the debug serial console:
> > +
> > + $ fastboot usb 0
> > +
> > +Flash the images on eMMC. On your computer, run:
> > +
> > + $ board/bsh/imx8mn-bsh-smm-s2-pro/flash.sh output/
> > +
> > +
> > +Booting the board
> > +-----------------
> > +
> > +By default the bootloader will search for the first valid image,
> > +starting with the internal eMMC.
> > diff --git a/configs/imx8mn_bsh_smm_s2_defconfig b/configs/imx8mn_bsh_smm_s2_defconfig
> > index bf91afb73543..7a0eb5ed4591 100644
> > --- a/configs/imx8mn_bsh_smm_s2_defconfig
> > +++ b/configs/imx8mn_bsh_smm_s2_defconfig
> > @@ -6,7 +6,7 @@ BR2_LINUX_KERNEL=y
> > BR2_LINUX_KERNEL_CUSTOM_VERSION=y
> > BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.18"
> > BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
> > -BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/bsh/imx8mn-bsh-smm-s2/linux.fragment"
> > +BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/bsh/common/imx8mn-bsh-smm-s2/linux.fragment"
> > BR2_LINUX_KERNEL_DTS_SUPPORT=y
> > BR2_LINUX_KERNEL_INTREE_DTS_NAME="freescale/imx8mn-bsh-smm-s2"
> > BR2_LINUX_KERNEL_DTB_KEEP_DIRNAME=y
> > diff --git a/configs/imx8mn_bsh_smm_s2_pro_defconfig b/configs/imx8mn_bsh_smm_s2_pro_defconfig
> > new file mode 100644
> > index 000000000000..ee8f79b5cd21
> > --- /dev/null
> > +++ b/configs/imx8mn_bsh_smm_s2_pro_defconfig
> > @@ -0,0 +1,41 @@
> > +BR2_aarch64=y
> > +BR2_TARGET_GENERIC_GETTY_PORT="ttymxc3"
> > +BR2_ROOTFS_POST_BUILD_SCRIPT="board/bsh/imx8mn-bsh-smm-s2-pro/post-build.sh"
> > +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/bsh/imx8mn-bsh-smm-s2-pro/post-image.sh"
> > +BR2_LINUX_KERNEL=y
> > +BR2_LINUX_KERNEL_CUSTOM_VERSION=y
> > +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.18"
>
> I've already give my Reviewed-by but I would update to latest stable
> Linux version here ^^^.
Ok, I will update to version 5.18.19
Thanks and regards,
Dario
>
> > +BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
> > +BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/bsh/common/imx8mn-bsh-smm-s2/linux.fragment"
> > +BR2_LINUX_KERNEL_DTS_SUPPORT=y
> > +BR2_LINUX_KERNEL_INTREE_DTS_NAME="freescale/imx8mn-bsh-smm-s2pro"
> > +BR2_LINUX_KERNEL_DTB_KEEP_DIRNAME=y
> > +BR2_LINUX_KERNEL_INSTALL_TARGET=y
> > +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
> > +BR2_PACKAGE_FREESCALE_IMX=y
> > +BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MN=y
> > +BR2_PACKAGE_FIRMWARE_IMX=y
> > +BR2_PACKAGE_FIRMWARE_IMX_DDR3=y
> > +BR2_TARGET_ROOTFS_EXT2=y
> > +BR2_TARGET_ROOTFS_EXT2_4=y
> > +BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
> > +BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
> > +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y
> > +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.5"
> > +BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="imx8mn"
> > +BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="IMX_BOOT_UART_BASE=0x30a60000"
> > +BR2_TARGET_UBOOT=y
> > +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
> > +BR2_TARGET_UBOOT_CUSTOM_VERSION=y
> > +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.07"
> > +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="imx8mn_bsh_smm_s2pro"
> > +BR2_TARGET_UBOOT_NEEDS_DTC=y
> > +BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
> > +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
> > +BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
> > +BR2_TARGET_UBOOT_NEEDS_IMX_FIRMWARE=y
> > +BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
> > +BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="flash.bin"
> > +BR2_TARGET_UBOOT_SPL=y
> > +BR2_PACKAGE_HOST_GENIMAGE=y
> > +BR2_PACKAGE_HOST_UUU=y
>
> All the rest looks good to me and can be committed.
>
> Best regards
> --
> Giulio Benetti
> Benetti Engineering sas
--
Dario Binacchi
Embedded Linux Developer
dario.binacchi@amarulasolutions.com
__________________________________
Amarula Solutions SRL
Via Le Canevare 30, 31100 Treviso, Veneto, IT
T. +39 042 243 5310
info@amarulasolutions.com
www.amarulasolutions.com
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2022-09-01 15:15 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-07-13 6:30 [Buildroot] [PATCH v3 0/2] Add support for BSH smm s2 [pro] boards Dario Binacchi
2022-07-13 6:30 ` [Buildroot] [PATCH v3 1/2] configs/imx8mn_bsh_smm_s2_defconfig: new defconfig Dario Binacchi
2022-07-29 21:19 ` Giulio Benetti
2022-09-01 15:13 ` Dario Binacchi
2022-07-13 6:30 ` [Buildroot] [PATCH v3 2/2] configs/imx8mn_bsh_smm_s2_pro_defconfig: " Dario Binacchi
2022-07-29 21:26 ` Giulio Benetti
2022-09-01 15:14 ` Dario Binacchi
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.