All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Дмитрий Санковский" <dsankouski@gmail.com>
To: u-boot@lists.denx.de, Ramon Fried <rfried.dev@gmail.com>
Subject: Subject: [PATCH 4/6] clocks: qcom: add clocks for SDM845 debug uart
Date: Tue, 31 Aug 2021 11:44:53 +0300	[thread overview]
Message-ID: <CABTCjFAseNFdskAeXCgV8hcBWHx6qGnv9D-65xushjuwEq6PTw@mail.gmail.com> (raw)

From 647a2cd58fff0e9d7e232dc5970071c5c91bb09f Mon Sep 17 00:00:00 2001
From: Dzmitry Sankouski <dsankouski@gmail.com>
Date: Sun, 29 Aug 2021 21:54:57 +0300
Subject: [PATCH 4/6] clocks: qcom: add clocks for SDM845 debug uart

Allows to change clock frequency of debug uart,
thus supporting wide range of baudrates.
Enable / disable functionality is not implemented yet.
In most use cases of SDM845 (i.e. mobile phones and tablets)
it's not needed, because qualcomm first stage bootloader leaves it
initialized, and on the other hand there's no possibility to
replace signed first stage bootloader with u-boot.

Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Cc: Ramon Fried <rfried.dev@gmail.com>
---
 arch/arm/mach-snapdragon/clock-sdm845.c     | 92 +++++++++++++++++++++
 arch/arm/mach-snapdragon/clock-snapdragon.c |  1 +
 arch/arm/mach-snapdragon/clock-snapdragon.h |  3 +-
 3 files changed, 95 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/mach-snapdragon/clock-sdm845.c

diff --git a/arch/arm/mach-snapdragon/clock-sdm845.c
b/arch/arm/mach-snapdragon/clock-sdm845.c
new file mode 100644
index 0000000000..9572639238
--- /dev/null
+++ b/arch/arm/mach-snapdragon/clock-sdm845.c
@@ -0,0 +1,92 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Clock drivers for Qualcomm SDM845
+ *
+ * (C) Copyright 2017 Jorge Ramirez Ortiz <jorge.ramirez-ortiz@linaro.org>
+ * (C) Copyright 2021 Dzmitry Sankouski <dsankouski@gmail.com>
+ *
+ * Based on Little Kernel driver, simplified
+ */
+
+#include <common.h>
+#include <clk-uclass.h>
+#include <dm.h>
+#include <errno.h>
+#include <asm/io.h>
+#include <linux/bitops.h>
+#include "clock-snapdragon.h"
+
+#define F(f, s, h, m, n) { (f), (s), (2 * (h) - 1), (m), (n) }
+
+struct freq_tbl {
+ uint freq;
+ uint src;
+ u8 pre_div;
+ u16 m;
+ u16 n;
+};
+
+static const struct freq_tbl ftbl_gcc_qupv3_wrap0_s0_clk_src[] = {
+ F(7372800, CFG_CLK_SRC_GPLL0_EVEN, 1, 384, 15625),
+ F(14745600, CFG_CLK_SRC_GPLL0_EVEN, 1, 768, 15625),
+ F(19200000, CFG_CLK_SRC_CXO, 1, 0, 0),
+ F(29491200, CFG_CLK_SRC_GPLL0_EVEN, 1, 1536, 15625),
+ F(32000000, CFG_CLK_SRC_GPLL0_EVEN, 1, 8, 75),
+ F(48000000, CFG_CLK_SRC_GPLL0_EVEN, 1, 4, 25),
+ F(64000000, CFG_CLK_SRC_GPLL0_EVEN, 1, 16, 75),
+ F(80000000, CFG_CLK_SRC_GPLL0_EVEN, 1, 4, 15),
+ F(96000000, CFG_CLK_SRC_GPLL0_EVEN, 1, 8, 25),
+ F(100000000, CFG_CLK_SRC_GPLL0_EVEN, 3, 0, 0),
+ F(102400000, CFG_CLK_SRC_GPLL0_EVEN, 1, 128, 375),
+ F(112000000, CFG_CLK_SRC_GPLL0_EVEN, 1, 28, 75),
+ F(117964800, CFG_CLK_SRC_GPLL0_EVEN, 1, 6144, 15625),
+ F(120000000, CFG_CLK_SRC_GPLL0_EVEN, 2.5, 0, 0),
+ F(128000000, CFG_CLK_SRC_GPLL0, 1, 16, 75),
+ { }
+};
+
+static const struct bcr_regs uart2_regs = {
+ .cfg_rcgr = SE9_UART_APPS_CFG_RCGR,
+ .cmd_rcgr = SE9_UART_APPS_CMD_RCGR,
+ .M = SE9_UART_APPS_M,
+ .N = SE9_UART_APPS_N,
+ .D = SE9_UART_APPS_D,
+};
+
+const struct freq_tbl *qcom_find_freq(const struct freq_tbl *f, uint rate)
+{
+ if (!f)
+ return NULL;
+
+ if (!f->freq)
+ return f;
+
+ for (; f->freq; f++)
+ if (rate <= f->freq)
+ return f;
+
+ /* Default to our fastest rate */
+ return f - 1;
+}
+
+static int clk_init_uart(struct msm_clk_priv *priv, uint rate)
+{
+ const struct freq_tbl *freq =
qcom_find_freq(ftbl_gcc_qupv3_wrap0_s0_clk_src, rate);
+
+ clk_rcg_set_rate_mnd(priv->base, &uart2_regs,
+ freq->pre_div, freq->m, freq->n, freq->src);
+
+ return 0;
+}
+
+ulong msm_set_rate(struct clk *clk, ulong rate)
+{
+ struct msm_clk_priv *priv = dev_get_priv(clk->dev);
+
+ switch (clk->id) {
+ case 0x58: /*UART2*/
+ return clk_init_uart(priv, rate);
+ default:
+ return 0;
+ }
+}
diff --git a/arch/arm/mach-snapdragon/clock-snapdragon.c
b/arch/arm/mach-snapdragon/clock-snapdragon.c
index 2b76371718..3deb08ac4a 100644
--- a/arch/arm/mach-snapdragon/clock-snapdragon.c
+++ b/arch/arm/mach-snapdragon/clock-snapdragon.c
@@ -135,6 +135,7 @@ static const struct udevice_id msm_clk_ids[] = {
  { .compatible = "qcom,gcc-apq8016" },
  { .compatible = "qcom,gcc-msm8996" },
  { .compatible = "qcom,gcc-apq8096" },
+ { .compatible = "qcom,gcc-sdm845" },
  { }
 };

diff --git a/arch/arm/mach-snapdragon/clock-snapdragon.h
b/arch/arm/mach-snapdragon/clock-snapdragon.h
index 58fab40a2e..2ac53b538d 100644
--- a/arch/arm/mach-snapdragon/clock-snapdragon.h
+++ b/arch/arm/mach-snapdragon/clock-snapdragon.h
@@ -1,6 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
- * Qualcomm APQ8016, APQ8096
+ * Qualcomm APQ8016, APQ8096, SDM845
  *
  * (C) Copyright 2017 Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
  */
@@ -9,6 +9,7 @@

 #define CFG_CLK_SRC_CXO   (0 << 8)
 #define CFG_CLK_SRC_GPLL0 (1 << 8)
+#define CFG_CLK_SRC_GPLL0_EVEN (6 << 8)
 #define CFG_CLK_SRC_MASK  (7 << 8)

 struct pll_vote_clk {
-- 
2.20.1

             reply	other threads:[~2021-08-31 11:29 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-31  8:44 Дмитрий Санковский [this message]
2021-09-05 13:36 ` Subject: [PATCH 4/6] clocks: qcom: add clocks for SDM845 debug uart Ramon Fried

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CABTCjFAseNFdskAeXCgV8hcBWHx6qGnv9D-65xushjuwEq6PTw@mail.gmail.com \
    --to=dsankouski@gmail.com \
    --cc=rfried.dev@gmail.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.