Hi Dhinakar,
> Cloning into '/ttc'...
> fatal: unable to access 'https://guthib.com/tbird20d/ttc.git/ ': Could not resolve host: github.com <http://github.com>
> The command '/bin/sh -c git clone https://github.com/tbird20d/Are you working behind a proxy?ttc.git $INST_FUEGO_ENGINE_PATH/ttc' returned a non-zero code:
> 128
>
> I tried 'export GIT_SSL_NO_VERIFY=1' and also 'git config http.sslVerify "false"' but no use. What else to do?
If that's the case, could you add this line right before the "RUN git clone ..." line and try again?
RUN if [ -n "$HTTP_PROXY" ]; then git config --global http.proxy ${HTTP_PROXY}; fi
Thanks,
Daniel
> On Apr 5, 2017 6:20 PM, "dhinakar k" <dhinakar.k@gmail.com <mailto:dhinakar.k@gmail.com> > wrote:
>
>
> Hi Tim,
>
> Thank you very much for your prompt response.
> I will try as per your advise and get back to you with my results.
>
> Regards,
> Dhinakar
>
> On Apr 5, 2017 10:28 AM, "Bird, Timothy" <Tim.Bird@sony.com <mailto:Tim.Bird@sony.com> > wrote:
>
>
> Yeah - my hosting service had scheduled maintenance today that I forgot about.
> But it seems to be up again now. Sorry about that.
>
> Please try again. Also, if you've already cloned the fuego-core repository, please
> do a 'git pull' in that repository to get the latest stuff. I just found some issues
> with the serial transport, with my toolchain. Also, be advised that you need
> to make sure that your user account has access to the serial port. When the
> docker container is created, it uses your user account and maps that to the
> user 'jenkins' inside the container. This is the user that is in effect when tests
> are run (and hence when the serial port is accessed during a test).
>
> Bottom line: if you can access the serial port as your regular user account, then
> Fuego should be able to access it from inside the docker container as the 'jenkins'
> user, which is required for the tests to work.
>
> Have fun!
> -- Tim
>
>
> > -----Original Message-----
> > From: dhinakar k [mailto:dhinakar.k@gmail.com <mailto:dhinakar.k@gmail.com> ]
> > Sent: Tuesday, April 04, 2017 9:31 PM
> > To: Bird, Timothy <Tim.Bird@sony.com <mailto:Tim.Bird@sony.com> >
> > Cc: fuego@lists.linuxfoundation.org <mailto:fuego@lists.linuxfoundation.org >
> > Subject: RE: Fuego v1.1 release
> >
> > Hi Tim,
> >
> > Thank you very much. I will try as per your instructions and get back in case of
> > issues.
> > But at present I'm not able to access this link
> > http://bird.org/fuego/Quickstart_Guide <http://bird.org/fuego/Quickstart_Guide >
> > <http://bird.org/fuego/Quickstart_Guide <http://bird.org/fuego/Quickstart_Guide > > Can you please check?
> >
> > Regards,
> > Dhinakar
> >
> > On Apr 5, 2017 9:36 AM, "Bird, Timothy" <Tim.Bird@sony.com <mailto:Tim.Bird@sony.com>
> > Fuego release 1.1, release candidate 2, is available now in my master
> > branch on bitbucket.
> >
> > Please follow the instructions on this page to download and use this
> > version of Fuego:
> > http://bird.org/fuego/Quickstart_Guide <http://bird.org/fuego/Quickstart_Guide >
> > <http://bird.org/fuego/Quickstart_Guide <http://bird.org/fuego/Quickstart_Guide > > .
> >
> > Please note that for serial port usage, you need to build the docker
> > container with access
> > to the serial port on the host. So you should use the command:
> > docker-create-usb-privileged-container.sh (instead of docker-create-
> > container.sh).
> > You may need to edit this script to add support for the particular
> > device node on your
> > host system that represents the serial port connected to your target
> > board. If is
> > a USB serial, or ACM0 or ACM1, the existing script should work.
> >
> > Once the docker container is running, and the board is configured,
> > manually access the
> > serial port on your board, and login, if needed, and make sure
> > the serial port connection is sitting at a shell prompt. Then,
> > disconnect any terminal or
> > serial programs connected to that port. Fuego must have sole access
> > to the serial line
> > in order to function properly.
> >
> > In your case, I would first try running a test that is very small, and
> > involves no compilation,
> > just to test the serial port operation.
> >
> > One test you can try is: Functional.fuego_board_check. You can
> > make a job for this with:
> > $ ftc add-job -b <your_board_name> -t
> > Functional.fuego_board_check -s default
> >
> > For a first run, to get more logging information, edit the job
> > configuration, and uncomment
> > the line that has this:
> > #FUEGO_DEBUG=1
> >
> > That is, remove the leading hash, and Fuego will add extra debug
> > information to the console output
> > for the test, which you can view in the Jenkins interface.
> >
> > Save that change to the job configuration.
> >
> > Then, "build" that job in the Jenkins interface.
> >
> > Proceed to this point, and let me know if anything fails. Then we can
> > discuss ideas for how to get
> > the LTP code onto the target board, and how to alter the existing test
> > to use the pre-installed
> > LTP software.
> >
> > Good luck.
> > -- Tim
> >
> > P.S. Documents on the wiki are currently in flux, to reflect
> > information for the 1.1 release. They should
> > be ready in time for the actual release. But please be patient as
> > information may change in the next
> > few days.
> >
> >
> > > -----Original Message-----
> > > From: dhinakar k [mailto:dhinakar.k@gmail.com <mailto:dhinakar.k@gmail.com>
> > <mailto:dhinakar.k@gmail.com <mailto:dhinakar.k@gmail.com> > ]
> > > Sent: Tuesday, April 04, 2017 7:58 PM
> > > To: Bird, Timothy <Tim.Bird@sony.com <mailto:Tim.Bird@sony.com>
> > <mailto:Tim.Bird@sony.com <mailto:Tim.Bird@sony.com> > >
> > > Cc: fuego@lists.linuxfoundation.org <mailto:fuego@lists.linuxfoundation.org >
> > <mailto:fuego@lists.linuxfoundation.org <mailto:fuego@lists.linuxfoundation.org > >
> > > Subject: Fuego v1.1 release
> > >
> > > Hi,
> > >
> > > May I know when will Fuego v1.1, which has support for serial
> > connectivity to
> > > target boards be released?
> > >
> > > Regards,
> > > Dhinakar
> > >
> > > On Apr 3, 2017 3:26 PM, "dhinakar k" <dhinakar.k@gmail.com <mailto:dhinakar.k@gmail.com>
> > <mailto:dhinakar.k@gmail.com <mailto:dhinakar.k@gmail.com> >
> >
> > > <mailto:dhinakar.k@gmail.com <mailto:dhinakar.k@gmail.com> <mailto:dhinakar.k@gmail.com
> <mailto:dhinakar.k@gmail.com> > > >
> > wrote:
> > >
> > >
> > > Hi Tim,
> > >
> > > I figured out how to change Jenkins port (given below):
> > >
> > > $ sudo docker exec -i -t id bash (container id to be provided)
> > > $ vi /etc/default/Jenkins
> > > Modify http port and restart container.
> > >
> > > Regards,
> > > Dhinakar
> > >
> > > On Apr 3, 2017 12:51 PM, "dhinakar k" <dhinakar.k@gmail.com <mailto:dhinakar.k@gmail.com>
> > <mailto:dhinakar.k@gmail.com <mailto:dhinakar.k@gmail.com> >
> >
> > > <mailto:dhinakar.k@gmail.com <mailto:dhinakar.k@gmail.com> <mailto:dhinakar.k@gmail.com
> <mailto:dhinakar.k@gmail.com> > > >
> > wrote:
> > >
> > >
> > > Hi Tim,
> > >
> > >
> > > Thanks a lot for your detailed reply.
> > > Please find my comments inline.
> > >
> > >
> > > Regards,
> > > Dhinakar
> > >
> > > On Sat, Apr 1, 2017 at 11:52 AM, Bird, Timothy
> >
> > > <Tim.Bird@sony.com <mailto:Tim.Bird@sony.com> <mailto:Tim.Bird@sony.com <mailto:Tim.Bird@sony.com>
> >
> > <mailto:Tim.Bird@sony.com <mailto:Tim.Bird@sony.com> <mailto:Tim.Bird@sony.com
> <mailto:Tim.Bird@sony.com> > > > wrote:
> > >
> > >
> > > See answers inline below.
> > >
> > > > -----Original Message-----
> > > > From: dhinakar k on Friday, March 31, 2017 1:46 AM
> > > > Hi Tim,
> > > >
> > > > UART Alpha Version
> > > > ************************
> > > > I have to demo Fuego to my management on one
> > > of our target board.
> > > > The target board has only UART Connectivity. I have
> > > two weeks to
> > > > setup target (along with cross compiler, config files
> > > etc.) and demo
> > > > the LTP test suite execution on it. LTP is already in
> > > the Pre-packed test list.
> > > > Should I be porting it again to my target to make it
> > > work?
> > > No. What you do it add your toolchain to Fuego, and
> > > Fuego will build
> > > LTP for your target. You can find instructions for
> > > adding a toolchain at:
> > > http://bird.org/fuego/Adding_a_toolchain <http://bird.org/fuego/Adding_a_toolchain >
> > <http://bird.org/fuego/Adding_a_toolchain <http://bird.org/fuego/Adding_a_toolchain > >
> > > <http://bird.org/fuego/Adding_a_toolchain <http://bird.org/fuego/Adding_a_toolchain >
> > <http://bird.org/fuego/Adding_a_toolchain <http://bird.org/fuego/Adding_a_toolchain > > >
> > >
> > >
> > >
> > >
> > > Thanks, I have already checked this link, will relook at it again
> > > with my current objective.
> > >
> > >
> > > Can you say where you are getting your toolchain
> > > from, and what kind it is?
> > > (e.g. from Linaro, from your SoC vendor, from Debian
> > > packages, or building it yourself with
> > > crosstool or Yocto Project or Buildroot?)
> > >
> > >
> > >
> > >
> > > gcc-linaro-aarch64-linux-gnu-4.8-2014.01_linux is the
> > > toolchain that I am currently using
> > > It is a debian package (buildroot).
> > >
> > >
> > >
> > > >How big an effort will it be?
> > > If you were not using serial, it should be trivial.
> > > However, one outstanding
> > > issue with the serial support is that it is not fast at
> > > transferring data.
> > > Our configuration of LTP requires transferring about
> > > 450mg of data, which
> > > takes too long over a serial port. We have some sub-
> > > test configurations
> > > for LTP, that require less space. I haven't measured
> > > them to see how much
> > > space they need on the target board.
> > >
> > > LTP can be refactored to have a smaller footprint, but
> > > this would require
> > > some work.
> > >
> > > In your case, I would be interested to hear how the
> > > device filesystem is populated
> > > now, and what size you have available for testing.
> > > We might be able to customize
> > > a test spec to use a subset of LTP that would work for
> > > your device.
> > >
> > >
> > >
> > >
> > > I want to use serial only for issuing command and getting
> > > status/logs.
> > > The RFS is currently on an SD card where the cross compiled
> > > LTP has been kept.
> > > I would like to use the full LTP suite as well as LTP-DDT.
> > >
> > >
> > >
> > >
> > > > Also can I get the alpha version of UART so that I
> > > can use it for this demo?
> > > Yes. Everything needed for using the serial port as a
> > > transport option
> > > is included in my 'next' branch (and will be in the
> > > upcoming 1.1 release).
> > > I hope to release 1.1-rc1 today or Monday. Serial
> > > support will be included in
> > > that release.
> > >
> > >
> > >
> > >
> > > Thanks please give me the link whenever it is available and
> > > also any instructions on how to update my current Fuego
> > >
> > >
> > > > Adding a new test suite
> > > > ***************************
> > > > 1. Is there any plan to add LTP-DDT test suite into
> > > Fuego container?
> > > There were no prior plans to do this, but it looks like
> > > an interesting suite to add.
> > > Since we have LTP, and LTP-DDT is a derivative, it
> > > should be relatively easy to
> > > add the individual tests from LTP.
> > >
> > > > 2. If I want to add my own test suite or test to
> > > Fuego dashboard, what is the
> > > > process?
> > > Please see this page:
> > > http://bird.org/fuego/Adding_a_test <http://bird.org/fuego/Adding_a_test >
> > <http://bird.org/fuego/Adding_a_test <http://bird.org/fuego/Adding_a_test > >
> > > <http://bird.org/fuego/Adding_a_test <http://bird.org/fuego/Adding_a_test >
> > <http://bird.org/fuego/Adding_a_test <http://bird.org/fuego/Adding_a_test > > >
> > >
> > >
> > >
> > >
> > > Thanks I will check the above link. Can you also point me to
> > > the link which helps me to run Fuego on port other than 8080?
> > >
> > >
> > > > 3. Is the dashboard customizable?
> > > Yes. The Jenkins dashboard is extremely
> > > customizable, and there are numerous
> > > view options and plugins to configure how you want
> > > the dashboard to look.
> > > JTA and Fuego 1.0 used a lot of these plugins to
> > > create a specific look.
> > > Fuego 1.1 leaves this more as an exercise for the
> > > user, since each site may want
> > > their own Jenkins interface customizations. We try to
> > > require a minimal set
> > > of Jenkins plugins for Fuego core functionality. Then,
> > > individual users and sites
> > > can choose which of the Jenkins plugins to use for
> > > the dashboard look they want.
> > >
> > >
> > >
> > >
> > > Thank is there any tips available already on customizing
> > > dashboard?
> > >
> > >
> > > >
> > > > Please let me know.
> > >
> > > There would be some work involved to make existing
> > > LTP work over the serial
> > > port for your board. But it should not be too difficult.
> > > More critical is how your
> > > distribution of Linux is configured to initialize. Does
> > > your board come up to a login
> > > prompt, or directly into a shell prompt?
> > >
> > >
> > >
> > > The board when booted will come up the buildroot login
> > > prompt and when logged into will go into a shell prompt.
> > > I hope I am clear with my requirements about LTP. Please let
> > > me know if you have any further questions.
> > >
> > >
> > > Let me know the answers to my questions, and we
> > > can work from there.
> > >
> > > Regards,
> > > -- Tim
> > >
> > >
> > >
> >
> >
> >
> >
>
>