From: Sarosh Arif <sarosh.arif@emumba.com>
To: ferruh.yigit@intel.com
Cc: dev@dpdk.org
Subject: Re: [dpdk-dev] [PATCH] testpmd: add speed capability in device info
Date: Tue, 8 Sep 2020 13:36:34 +0500 [thread overview]
Message-ID: <CABoZmYM2XfxgYh5s98VXBtr7rqX--oewMWUENPqVyivpgCm3vg@mail.gmail.com> (raw)
In-Reply-To: <20200904062339.77430-1-sarosh.arif@emumba.com>
delay_us_sleep_autotest is failing on this patch. To replicate it, I
ran the same test on my system and it did not fail. Can this test be
re-run?
On Fri, Sep 4, 2020 at 11:23 AM Sarosh Arif <sarosh.arif@emumba.com> wrote:
>
> diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c
> index 30bee3324..8824ad174 100644
> --- a/app/test-pmd/config.c
> +++ b/app/test-pmd/config.c
> @@ -518,6 +518,7 @@ device_infos_display(const char *identifier)
> struct rte_device *dev;
> struct rte_devargs da;
> portid_t port_id;
> + struct rte_eth_dev_info dev_info;
> char devstr[128];
>
> memset(&da, 0, sizeof(da));
> @@ -569,6 +570,90 @@ device_infos_display(const char *identifier)
> &mac_addr);
> rte_eth_dev_get_name_by_port(port_id, name);
> printf("\n\tDevice name: %s", name);
> + rte_eth_dev_info_get(port_id, &dev_info);
> + switch (dev_info.speed_capa) {
> + case ETH_LINK_SPEED_AUTONEG:
> + printf("\n\tDevice speed capability: %s",
> + "Autonegotiate (all speeds)");
> + break;
> + case ETH_LINK_SPEED_FIXED:
> + printf("\n\tDevice speed capability: %s",
> + "Disable autonegotiate (fixed speed)");
> + break;
> + case ETH_LINK_SPEED_10M_HD ...
> + ETH_LINK_SPEED_10M-1:
> + printf("\n\tDevice speed capability: %s",
> + "10 Mbps half-duplex");
> + break;
> + case ETH_LINK_SPEED_10M ...
> + ETH_LINK_SPEED_100M_HD-1:
> + printf("\n\tDevice speed capability: %s",
> + "10 Mbps full-duplex");
> + break;
> + case ETH_LINK_SPEED_100M_HD ...
> + ETH_LINK_SPEED_100M-1:
> + printf("\n\tDevice speed capability: %s",
> + "100 Mbps half-duplex");
> + break;
> + case ETH_LINK_SPEED_100M ...
> + ETH_LINK_SPEED_1G-1:
> + printf("\n\tDevice speed capability: %s",
> + "100 Mbps full-duplex");
> + break;
> + case ETH_LINK_SPEED_1G ...
> + ETH_LINK_SPEED_2_5G-1:
> + printf("\n\tDevice speed capability: %s",
> + "1 Gbps");
> + break;
> + case ETH_LINK_SPEED_2_5G ...
> + ETH_LINK_SPEED_5G-1:
> + printf("\n\tDevice speed capability: %s",
> + "2.5 Gbps");
> + break;
> + case ETH_LINK_SPEED_5G ...
> + ETH_LINK_SPEED_10G-1:
> + printf("\n\tDevice speed capability: %s",
> + "5 Gbps");
> + break;
> + case ETH_LINK_SPEED_10G ...
> + ETH_LINK_SPEED_20G-1:
> + printf("\n\tDevice speed capability: %s",
> + "10 Gbps");
> + break;
> + case ETH_LINK_SPEED_20G ...
> + ETH_LINK_SPEED_25G-1:
> + printf("\n\tDevice speed capability: %s",
> + "20 Gbps");
> + break;
> + case ETH_LINK_SPEED_25G ...
> + ETH_LINK_SPEED_50G-1:
> + printf("\n\tDevice speed capability: %s",
> + "25 Gbps");
> + break;
> + case ETH_LINK_SPEED_50G ...
> + ETH_LINK_SPEED_56G-1:
> + printf("\n\tDevice speed capability: %s",
> + "50 Gbps");
> + break;
> + case ETH_LINK_SPEED_56G ...
> + ETH_LINK_SPEED_100G-1:
> + printf("\n\tDevice speed capability: %s",
> + "56 Gbps");
> + break;
> + case ETH_LINK_SPEED_100G ...
> + ETH_LINK_SPEED_200G-1:
> + printf("\n\tDevice speed capability: %s",
> + "100 Gbps");
> + break;
> + case ETH_LINK_SPEED_200G:
> + printf("\n\tDevice speed capability: %s",
> + "200 Gbps");
> + break;
> + default:
> + printf("\n\tDevice speed capability: %s",
> + "not available");
> + break;
> + }
> printf("\n");
> }
> }
> --
> 2.25.1
>
next prev parent reply other threads:[~2020-09-08 8:37 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-04 6:23 [dpdk-dev] [PATCH] testpmd: add speed capability in device info Sarosh Arif
2020-09-08 8:36 ` Sarosh Arif [this message]
2020-09-08 11:55 ` Ferruh Yigit
2020-09-17 15:56 ` Ferruh Yigit
2020-09-21 11:22 ` Sarosh Arif
2020-09-28 10:01 ` [dpdk-dev] [PATCH v2] " Sarosh Arif
2020-10-04 8:51 ` Asaf Penso
2020-10-07 15:30 ` Ferruh Yigit
2020-10-08 11:49 ` [dpdk-dev] [PATCH v3] " Sarosh Arif
2020-10-08 16:14 ` Ferruh Yigit
2020-10-08 18:11 ` [dpdk-dev] [PATCH v4] " Sarosh Arif
2020-10-08 18:25 ` [dpdk-dev] [PATCH v5] " Sarosh Arif
2020-10-09 9:27 ` Ferruh Yigit
2020-10-09 11:53 ` Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CABoZmYM2XfxgYh5s98VXBtr7rqX--oewMWUENPqVyivpgCm3vg@mail.gmail.com \
--to=sarosh.arif@emumba.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.