From mboxrd@z Thu Jan  1 00:00:00 1970
From: Igor Opaniuk <igor.opaniuk@gmail.com>
Date: Tue, 30 Jul 2019 14:00:18 +0300
Subject: [U-Boot] nxp: HABv4 secure boot on iMX7 NAND broken
Message-ID: <CAByghJZn8d91uFr5JXSR=jXcfU4engZP_=buOk7MNNjaVeigLA@mail.gmail.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
To: u-boot@lists.denx.de

Hi folks,

Just curious if you ever faced any issues with HABv4 based
secure boot on iMX7 SoC-based boards + NAND +
mainline U-Boot (although it works perfectly when booting from
eMMC).

I'm currently playing with it on Colibri iMX7 NAND version,
following all steps from [1],
(colibri_imx7_defconfig, where CONFIG_SECURE_BOOT=3Dy
and CONFIG_FSL_CAAM=3Dy, without these two options enabled
it's booting ok) and facing the same issue as explained
in one of NXP forum threads [2]. Taking into account that default
BootROM doesn't provide any output at all to the serial console it is like
looking for a needle in a haystack.

Do you have any ideas about possible pitfalls/what could be missing
in this puzzle? Or at least some hints where to look into?

Thanks in advance!

[1] https://gitlab.denx.de/u-boot/u-boot/blob/master/doc/imx/habv4/guides/m=
x6_mx7_secure_boot.txt
[2] https://community.nxp.com/thread/380130

--=20
Best regards - Freundliche Gr=C3=BCsse - Meilleures salutations

Igor Opaniuk

mailto: igor.opaniuk at gmail.com
skype: igor.opanyuk
+380 (93) 836 40 67
http://ua.linkedin.com/in/iopaniuk