Thanks for the update! On Tue, Dec 24, 2019, 9:25 PM CK Hu wrote: > Hi, Mark: > > On Wed, 2019-12-11 at 10:49 -0500, Mark Yacoub wrote: > > drm/mediatek: return if plane pending state is disabled. > > > > If the plane pending state is disabled, call mtk_ovl_layer_off then > > return. > > This guarantees that that the state is valid for all operations when the > > pending state is enabled. > > For this series, applied to mediatek-drm-next-5.6 [1], thanks. > > [1] > > https://github.com/ckhu-mediatek/linux.git-tags/commits/mediatek-drm-next-5.6 > > Regards, > CK > > > > > Suggested-by: Sean Paul > > To: CK Hu > > To: dri-devel@lists.freedesktop.org > > Cc: Daniele Castagna > > Cc: Philipp Zabel > > Cc: David Airlie > > Cc: Daniel Vetter > > Cc: Matthias Brugger > > Cc: linux-arm-kernel@lists.infradead.org > > Cc: linux-mediatek@lists.infradead.org > > Signed-off-by: Mark Yacoub > > --- > > drivers/gpu/drm/mediatek/mtk_disp_ovl.c | 7 ++++--- > > 1 file changed, 4 insertions(+), 3 deletions(-) > > > > diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c > b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c > > index 4a55bb6e2213..526b595eeff9 100644 > > --- a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c > > +++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c > > @@ -260,8 +260,10 @@ static void mtk_ovl_layer_config(struct > mtk_ddp_comp *comp, unsigned int idx, > > unsigned int src_size = (pending->height << 16) | pending->width; > > unsigned int con; > > > > - if (!pending->enable) > > + if (!pending->enable) { > > mtk_ovl_layer_off(comp, idx); > > + return; > > + } > > > > con = ovl_fmt_convert(ovl, fmt); > > if (idx != 0) > > @@ -283,8 +285,7 @@ static void mtk_ovl_layer_config(struct mtk_ddp_comp > *comp, unsigned int idx, > > writel_relaxed(offset, comp->regs + DISP_REG_OVL_OFFSET(idx)); > > writel_relaxed(addr, comp->regs + DISP_REG_OVL_ADDR(ovl, idx)); > > > > - if (pending->enable) > > - mtk_ovl_layer_on(comp, idx); > > + mtk_ovl_layer_on(comp, idx); > > } > > > > static void mtk_ovl_bgclr_in_on(struct mtk_ddp_comp *comp) > >