Re: [PATCH v5 2/2] hw/arm/sbsa-ref: add SBSA watchdog device

[Shashi Mallela <shashi.mallela@linaro.org>]

[-- Attachment #1: Type: text/plain, Size: 5357 bytes --]

This was added as a placeholder for the virt requirement suggested by Maxim
earlier.Agreed that this fdt otherwise has no significance for sbsa-ref
platform nor is being used by ACPI table created for wdt.

-Shashi

On Wed, 14 Oct 2020 at 05:31, Graeme Gregory <graeme@nuviainc.com> wrote:

> On Tue, Oct 13, 2020 at 11:16:31AM -0400, Shashi Mallela wrote:
> > Included the newly implemented SBSA generic watchdog device model into
> > SBSA platform
> >
> > Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org>
> > ---
> >  hw/arm/sbsa-ref.c | 50 +++++++++++++++++++++++++++++++++++++++++++++++
> >  1 file changed, 50 insertions(+)
> >
> > diff --git a/hw/arm/sbsa-ref.c b/hw/arm/sbsa-ref.c
> > index 9c3a893bedfd..97ed41607119 100644
> > --- a/hw/arm/sbsa-ref.c
> > +++ b/hw/arm/sbsa-ref.c
> > @@ -30,6 +30,7 @@
> >  #include "exec/hwaddr.h"
> >  #include "kvm_arm.h"
> >  #include "hw/arm/boot.h"
> > +#include "hw/arm/fdt.h"
> >  #include "hw/block/flash.h"
> >  #include "hw/boards.h"
> >  #include "hw/ide/internal.h"
> > @@ -40,6 +41,7 @@
> >  #include "hw/qdev-properties.h"
> >  #include "hw/usb.h"
> >  #include "hw/char/pl011.h"
> > +#include "hw/watchdog/wdt_sbsa_gwdt.h"
> >  #include "net/net.h"
> >  #include "qom/object.h"
> >
> > @@ -64,6 +66,9 @@ enum {
> >      SBSA_GIC_DIST,
> >      SBSA_GIC_REDIST,
> >      SBSA_SECURE_EC,
> > +    SBSA_GWDT,
> > +    SBSA_GWDT_REFRESH,
> > +    SBSA_GWDT_CONTROL,
> >      SBSA_SMMU,
> >      SBSA_UART,
> >      SBSA_RTC,
> > @@ -104,6 +109,8 @@ static const MemMapEntry sbsa_ref_memmap[] = {
> >      [SBSA_GIC_DIST] =           { 0x40060000, 0x00010000 },
> >      [SBSA_GIC_REDIST] =         { 0x40080000, 0x04000000 },
> >      [SBSA_SECURE_EC] =          { 0x50000000, 0x00001000 },
> > +    [SBSA_GWDT_REFRESH] =       { 0x50010000, 0x00001000 },
> > +    [SBSA_GWDT_CONTROL] =       { 0x50011000, 0x00001000 },
> >      [SBSA_UART] =               { 0x60000000, 0x00001000 },
> >      [SBSA_RTC] =                { 0x60010000, 0x00001000 },
> >      [SBSA_GPIO] =               { 0x60020000, 0x00001000 },
> > @@ -133,6 +140,8 @@ static const int sbsa_ref_irqmap[] = {
> >      [SBSA_SECURE_UART_MM] = 9,
> >      [SBSA_AHCI] = 10,
> >      [SBSA_EHCI] = 11,
> > +    [SBSA_SMMU] = 12, /* ... to 15 */
> > +    [SBSA_GWDT] = 16,
> >  };
> >
> >  static uint64_t sbsa_ref_cpu_mp_affinity(SBSAMachineState *sms, int idx)
> > @@ -141,6 +150,30 @@ static uint64_t
> sbsa_ref_cpu_mp_affinity(SBSAMachineState *sms, int idx)
> >      return arm_cpu_mp_affinity(idx, clustersz);
> >  }
> >
> > +static void create_wdt_fdt(SBSAMachineState *sms)
> > +{
> > +    char *nodename;
> > +    const char compat[] = "arm,sbsa-gwdt";
> > +
> > +    hwaddr rbase = sbsa_ref_memmap[SBSA_GWDT_REFRESH].base;
> > +    hwaddr cbase = sbsa_ref_memmap[SBSA_GWDT_CONTROL].base;
> > +    int irq = sbsa_ref_irqmap[SBSA_GWDT];
> > +
> > +    nodename = g_strdup_printf("/watchdog@%" PRIx64, rbase);
> > +    qemu_fdt_add_subnode(sms->fdt, nodename);
> > +
> > +    qemu_fdt_setprop(sms->fdt, nodename, "compatible",
> > +                             compat, sizeof(compat));
> > +    qemu_fdt_setprop_sized_cells(sms->fdt, nodename, "reg",
> > +                                 2, rbase, 2, SBSA_GWDT_RMMIO_SIZE,
> > +                                 2, cbase, 2, SBSA_GWDT_CMMIO_SIZE);
> > +    qemu_fdt_setprop_cells(sms->fdt, nodename, "interrupts",
> > +                                GIC_FDT_IRQ_TYPE_PPI, irq,
> > +                                GIC_FDT_IRQ_FLAGS_LEVEL_HI);
> > +    qemu_fdt_setprop_cell(sms->fdt, nodename, "timeout-sec", 30);
> > +    g_free(nodename);
> > +}
> > +
>
> Is this actually used anywhere? I ask because SBSA-ref is not a FDT
> booting machine and only uses FDT to transfer some dynamic info to
> arm-tf/edk2 and is not a full description tree. Your ACPI patch in
> edk2 certainly does not use this info.
>
> Graeme
>
>
> >  /*
> >   * Firmware on this machine only uses ACPI table to load OS, these
> limited
> >   * device tree nodes are just to let firmware know the info which
> varies from
> > @@ -219,6 +252,7 @@ static void create_fdt(SBSAMachineState *sms)
> >
> >          g_free(nodename);
> >      }
> > +    create_wdt_fdt(sms);
> >  }
> >
> >  #define SBSA_FLASH_SECTOR_SIZE (256 * KiB)
> > @@ -447,6 +481,20 @@ static void create_rtc(const SBSAMachineState *sms)
> >      sysbus_create_simple("pl031", base, qdev_get_gpio_in(sms->gic,
> irq));
> >  }
> >
> > +static void create_wdt(const SBSAMachineState *sms)
> > +{
> > +    hwaddr rbase = sbsa_ref_memmap[SBSA_GWDT_REFRESH].base;
> > +    hwaddr cbase = sbsa_ref_memmap[SBSA_GWDT_CONTROL].base;
> > +    DeviceState *dev = qdev_new(TYPE_WDT_SBSA_GWDT);
> > +    SysBusDevice *s = SYS_BUS_DEVICE(dev);
> > +    int irq = sbsa_ref_irqmap[SBSA_GWDT];
> > +
> > +    sysbus_realize_and_unref(s, &error_fatal);
> > +    sysbus_mmio_map(s, 0, rbase);
> > +    sysbus_mmio_map(s, 1, cbase);
> > +    sysbus_connect_irq(s, 0, qdev_get_gpio_in(sms->gic, irq));
> > +}
> > +
> >  static DeviceState *gpio_key_dev;
> >  static void sbsa_ref_powerdown_req(Notifier *n, void *opaque)
> >  {
> > @@ -730,6 +778,8 @@ static void sbsa_ref_init(MachineState *machine)
> >
> >      create_rtc(sms);
> >
> > +    create_wdt(sms);
> > +
> >      create_gpio(sms);
> >
> >      create_ahci(sms);
> > --
> > 2.18.4
> >
> >
>

[-- Attachment #2: Type: text/html, Size: 7087 bytes --]