* [PATCH linux dev-5.0 1/1] ARM: dts: aspeed: Add s7106 BMC Machine
@ 2019-04-23 11:56 ray.lue
2019-04-29 8:10 ` Joel Stanley
0 siblings, 1 reply; 2+ messages in thread
From: ray.lue @ 2019-04-23 11:56 UTC (permalink / raw)
To: openbmc, joel; +Cc: ray.lue
s7106 is a Tyan platform family with an ASPEED AST2500 BMC.
Signed-off-by: ray.lue <ray.lue@mic.com.tw>
---
arch/arm/boot/dts/Makefile | 3 +-
arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts | 174 ++++++++++++++++++++++++++++
2 files changed, 176 insertions(+), 1 deletion(-)
create mode 100755 arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index bd40148..bc38f77 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1247,4 +1247,5 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-bmc-opp-witherspoon.dtb \
aspeed-bmc-opp-zaius.dtb \
aspeed-bmc-portwell-neptune.dtb \
- aspeed-bmc-quanta-q71l.dtb
+ aspeed-bmc-quanta-q71l.dtb \
+ aspeed-bmc-tyan-s7106.dtb
diff --git a/arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts b/arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts
new file mode 100755
index 0000000..b9801d1
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts
@@ -0,0 +1,174 @@
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+
+/ {
+ model = "Tyan S7106 BMC";
+ compatible = "tyan,s7106-bmc", "aspeed,ast2500";
+
+ chosen {
+ stdout-path = &uart5;
+ bootargs = "console=ttyS4,115200 earlyprintk";
+ };
+
+ memory {
+ reg = <0x80000000 0x20000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ vga_memory: framebuffer@98000000 {
+ no-map;
+ reg = <0x98000000 0x00800000>; /* 8MB */
+ };
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+ <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+ <&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+ <&adc 12>, <&adc 13>, <&adc 14>;
+ };
+
+ iio-hwmon-battery {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 15>;
+ };
+};
+
+&fmc {
+ status = "okay";
+ flash@0 {
+ label = "bmc";
+ status = "okay";
+ m25p,fast-read;
+#include "openbmc-flash-layout.dtsi"
+ };
+};
+
+// UART1 is used only by the host. While the BMC does not need to access it,
+// enable it here to make sure the UART's clock gets enabled.
+&uart1 {
+ status = "okay";
+};
+
+&uart3 {
+ status = "okay";
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&lpc_ctrl {
+ status = "okay";
+};
+
+&lpc_snoop {
+ status = "okay";
+ snoop-ports = <0x80>;
+};
+
+&adc {
+ status = "okay";
+};
+
+&pwm_tacho {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm3_default &pinctrl_pwm4_default>;
+
+ fan@0 {
+ reg = <0x03>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+ };
+
+ fan@1 {
+ reg = <0x04>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+ };
+
+ fan@2 {
+ reg = <0x03>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+ };
+
+ fan@3 {
+ reg = <0x04>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+ };
+
+ fan@4 {
+ reg = <0x03>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+ };
+
+ fan@5 {
+ reg = <0x04>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x07>;
+ };
+};
+
+&i2c0 {
+ status = "okay";
+
+ nct7802@28 {
+ compatible = "nuvoton,nct7802";
+ reg = <0x28>;
+ };
+};
+
+&i2c1 {
+ status = "okay";
+};
+
+&i2c2 {
+ status = "okay";
+
+ eeprom@50 {
+ compatible = "at,24c256";
+ reg = <0x50>;
+ };
+};
+
+&i2c3 {
+ status = "okay";
+};
+
+&i2c4 {
+ status = "okay";
+};
+
+&i2c5 {
+ status = "okay";
+};
+
+&i2c6 {
+ status = "okay";
+};
+
+&i2c7 {
+ status = "okay";
+};
+
+&i2c8 {
+ status = "okay";
+};
+
+&mac0 {
+ status = "okay";
+
+ use-ncsi;
+ no-hw-checksum;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii1_default>;
+};
+
+&ibt {
+ status = "okay";
+};
--
2.7.4
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH linux dev-5.0 1/1] ARM: dts: aspeed: Add s7106 BMC Machine
2019-04-23 11:56 [PATCH linux dev-5.0 1/1] ARM: dts: aspeed: Add s7106 BMC Machine ray.lue
@ 2019-04-29 8:10 ` Joel Stanley
0 siblings, 0 replies; 2+ messages in thread
From: Joel Stanley @ 2019-04-29 8:10 UTC (permalink / raw)
To: ray.lue; +Cc: OpenBMC Maillist, ray.lue
On Tue, 23 Apr 2019 at 11:56, ray.lue <ray.lue@gmail.com> wrote:
>
> s7106 is a Tyan platform family with an ASPEED AST2500 BMC.
>
> Signed-off-by: ray.lue <ray.lue@mic.com.tw>
The patch looks good. Can you fix the signed off by to have your name
spelt out? I think you want to do this:
git config --global user.name "Ray Lue"
git commit --amend --reset-author -s
> @@ -1247,4 +1247,5 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
> aspeed-bmc-opp-witherspoon.dtb \
> aspeed-bmc-opp-zaius.dtb \
> aspeed-bmc-portwell-neptune.dtb \
> - aspeed-bmc-quanta-q71l.dtb
> + aspeed-bmc-quanta-q71l.dtb \
> + aspeed-bmc-tyan-s7106.dtb
Please add your entry so it is sorted alphabetically.
> diff --git a/arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts b/arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts
> new file mode 100755
> index 0000000..b9801d1
> --- /dev/null
> +++ b/arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts
> @@ -0,0 +1,174 @@
You need to have a licence and copyright line.Please take a look at
another file, like
$ head -n 5 arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts
// SPDX-License-Identifier: GPL-2.0
// Copyright (c) 2017 Intel Corporation
/dts-v1/;
#include "aspeed-g5.dtsi"
> +/dts-v1/;
> +
> +#include "aspeed-g5.dtsi"
> +
> +/ {
> + model = "Tyan S7106 BMC";
> + compatible = "tyan,s7106-bmc", "aspeed,ast2500";
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2019-04-29 8:10 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-04-23 11:56 [PATCH linux dev-5.0 1/1] ARM: dts: aspeed: Add s7106 BMC Machine ray.lue
2019-04-29 8:10 ` Joel Stanley
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.