* [PATCH v3 2/2] ARM: dts: aspeed: Add Facebook Backpack-CMM BMC
@ 2018-11-09 0:50 ` Tao Ren
0 siblings, 0 replies; 6+ messages in thread
From: Tao Ren @ 2018-11-09 0:50 UTC (permalink / raw)
To: Joel Stanley, Andrew Jeffery, linux-arm-kernel, linux-aspeed, openbmc
Cc: Tao Ren
Add initial version of device tree file for Facebook Backpack CMM
(Chasis Management Module) ast2500 BMC.
Signed-off-by: Tao Ren <taoren@fb.com>
---
Changes in v3:
- including pin configurations in UARTs 1-4 device nodes explicitly.
- including external pinctrl controller nodes gfx and lhc explicitly.
- deleting misleading i2c-related statements from commit messages, and
adding comments for i2c buses in the board device tree file.
Changes in v2:
- including "aspeed-bmc-facebook-cmm.dtb" in Makefile.
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts | 368 ++++++++++++++++++
2 files changed, 369 insertions(+)
create mode 100644 arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index a7c313bfe490..2239e6a30d7a 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1200,6 +1200,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-ast2500-evb.dtb \
aspeed-bmc-arm-centriq2400-rep.dtb \
aspeed-bmc-arm-stardragon4800-rep2.dtb \
+ aspeed-bmc-facebook-cmm.dtb \
aspeed-bmc-facebook-tiogapass.dtb \
aspeed-bmc-intel-s2600wf.dtb \
aspeed-bmc-opp-lanyang.dtb \
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts
new file mode 100644
index 000000000000..9f194b5eeba4
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts
@@ -0,0 +1,368 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2018 Facebook Inc.
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+
+/ {
+ model = "Facebook Backpack CMM BMC";
+ compatible = "facebook,cmm-bmc", "aspeed,ast2500";
+
+ aliases {
+ /*
+ * Override the default uart aliases to avoid breaking
+ * the legacy applications.
+ */
+ serial0 = &uart5;
+ serial1 = &uart1;
+ serial2 = &uart3;
+ serial3 = &uart4;
+
+ /*
+ * Hardcode the bus number of i2c switches' channels to
+ * avoid breaking the legacy applications.
+ */
+ i2c16 = &imux16;
+ i2c17 = &imux17;
+ i2c18 = &imux18;
+ i2c19 = &imux19;
+ i2c20 = &imux20;
+ i2c21 = &imux21;
+ i2c22 = &imux22;
+ i2c23 = &imux23;
+ i2c24 = &imux24;
+ i2c25 = &imux25;
+ i2c26 = &imux26;
+ i2c27 = &imux27;
+ i2c28 = &imux28;
+ i2c29 = &imux29;
+ i2c30 = &imux30;
+ i2c31 = &imux31;
+ i2c32 = &imux32;
+ i2c33 = &imux33;
+ i2c34 = &imux34;
+ i2c35 = &imux35;
+ i2c36 = &imux36;
+ i2c37 = &imux37;
+ i2c38 = &imux38;
+ i2c39 = &imux39;
+ };
+
+ chosen {
+ stdout-path = &uart1;
+ bootargs = "console=ttyS1,9600n8 root=/dev/ram rw earlyprintk";
+ };
+
+ memory@80000000 {
+ reg = <0x80000000 0x20000000>;
+ };
+};
+
+&pinctrl {
+ aspeed,external-nodes = <&gfx &lhc>;
+};
+
+/*
+ * Update reset type to "system" (full chip) to fix warm reboot hang issue
+ * when reset type is set to default ("soc", gated by reset mask registers).
+ */
+&wdt1 {
+ status = "okay";
+ aspeed,reset-type = "system";
+};
+
+/*
+ * wdt2 is not used by Backpack CMM.
+ */
+&wdt2 {
+ status = "disabled";
+};
+
+&fmc {
+ status = "okay";
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "bmc";
+#include "facebook-bmc-flash-layout.dtsi"
+ };
+};
+
+&uart1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd1_default
+ &pinctrl_rxd1_default
+ &pinctrl_ncts1_default
+ &pinctrl_ndcd1_default
+ &pinctrl_ndsr1_default
+ &pinctrl_ndtr1_default
+ &pinctrl_nrts1_default>;
+};
+
+&uart3 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd3_default
+ &pinctrl_rxd3_default
+ &pinctrl_ncts3_default
+ &pinctrl_ndcd3_default
+ &pinctrl_nri3_default>;
+};
+
+&uart4 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd4_default
+ &pinctrl_rxd4_default>;
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&mac1 {
+ status = "okay";
+ no-hw-checksum;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+/*
+ * I2C bus reserved for communication with COM-E.
+ */
+&i2c0 {
+ status = "okay";
+};
+
+/*
+ * I2C bus to Line Cards and Fabric Cards.
+ */
+&i2c1 {
+ status = "okay";
+
+ i2c-switch@77 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x77>;
+
+ imux16: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux17: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux18: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux19: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux20: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux21: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux22: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux23: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+};
+
+/*
+ * I2C bus to Power Distribution Board.
+ */
+&i2c2 {
+ status = "okay";
+
+ i2c-switch@71 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x71>;
+
+ imux24: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux25: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux26: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux27: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux28: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux29: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux30: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux31: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+};
+
+/*
+ * I2c bus connected with temperature sensors on CMM.
+ */
+&i2c3 {
+ status = "okay";
+};
+
+/*
+ * I2C bus reserved for communication with COM-E.
+ */
+&i2c4 {
+ status = "okay";
+};
+
+/*
+ * I2c bus connected with ADM1278.
+ */
+&i2c5 {
+ status = "okay";
+};
+
+/*
+ * I2c bus connected with I/O Expander.
+ */
+&i2c6 {
+ status = "okay";
+};
+
+/*
+ * I2c bus connected with I/O Expander and EPROMs.
+ */
+&i2c7 {
+ status = "okay";
+};
+
+/*
+ * I2C bus to Fan Control Board.
+ */
+&i2c8 {
+ status = "okay";
+
+ i2c-switch@77 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x77>;
+
+ imux32: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux33: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux34: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux35: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux36: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux37: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux38: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux39: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+};
+
+/*
+ * I2C bus to CMM CPLD.
+ */
+&i2c13 {
+ status = "okay";
+};
+
+&adc {
+ status = "okay";
+};
--
2.17.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v3 2/2] ARM: dts: aspeed: Add Facebook Backpack-CMM BMC
@ 2018-11-09 0:50 ` Tao Ren
0 siblings, 0 replies; 6+ messages in thread
From: Tao Ren @ 2018-11-09 0:50 UTC (permalink / raw)
To: linux-arm-kernel
Add initial version of device tree file for Facebook Backpack CMM
(Chasis Management Module) ast2500 BMC.
Signed-off-by: Tao Ren <taoren@fb.com>
---
Changes in v3:
- including pin configurations in UARTs 1-4 device nodes explicitly.
- including external pinctrl controller nodes gfx and lhc explicitly.
- deleting misleading i2c-related statements from commit messages, and
adding comments for i2c buses in the board device tree file.
Changes in v2:
- including "aspeed-bmc-facebook-cmm.dtb" in Makefile.
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts | 368 ++++++++++++++++++
2 files changed, 369 insertions(+)
create mode 100644 arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index a7c313bfe490..2239e6a30d7a 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1200,6 +1200,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-ast2500-evb.dtb \
aspeed-bmc-arm-centriq2400-rep.dtb \
aspeed-bmc-arm-stardragon4800-rep2.dtb \
+ aspeed-bmc-facebook-cmm.dtb \
aspeed-bmc-facebook-tiogapass.dtb \
aspeed-bmc-intel-s2600wf.dtb \
aspeed-bmc-opp-lanyang.dtb \
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts
new file mode 100644
index 000000000000..9f194b5eeba4
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts
@@ -0,0 +1,368 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2018 Facebook Inc.
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+
+/ {
+ model = "Facebook Backpack CMM BMC";
+ compatible = "facebook,cmm-bmc", "aspeed,ast2500";
+
+ aliases {
+ /*
+ * Override the default uart aliases to avoid breaking
+ * the legacy applications.
+ */
+ serial0 = &uart5;
+ serial1 = &uart1;
+ serial2 = &uart3;
+ serial3 = &uart4;
+
+ /*
+ * Hardcode the bus number of i2c switches' channels to
+ * avoid breaking the legacy applications.
+ */
+ i2c16 = &imux16;
+ i2c17 = &imux17;
+ i2c18 = &imux18;
+ i2c19 = &imux19;
+ i2c20 = &imux20;
+ i2c21 = &imux21;
+ i2c22 = &imux22;
+ i2c23 = &imux23;
+ i2c24 = &imux24;
+ i2c25 = &imux25;
+ i2c26 = &imux26;
+ i2c27 = &imux27;
+ i2c28 = &imux28;
+ i2c29 = &imux29;
+ i2c30 = &imux30;
+ i2c31 = &imux31;
+ i2c32 = &imux32;
+ i2c33 = &imux33;
+ i2c34 = &imux34;
+ i2c35 = &imux35;
+ i2c36 = &imux36;
+ i2c37 = &imux37;
+ i2c38 = &imux38;
+ i2c39 = &imux39;
+ };
+
+ chosen {
+ stdout-path = &uart1;
+ bootargs = "console=ttyS1,9600n8 root=/dev/ram rw earlyprintk";
+ };
+
+ memory at 80000000 {
+ reg = <0x80000000 0x20000000>;
+ };
+};
+
+&pinctrl {
+ aspeed,external-nodes = <&gfx &lhc>;
+};
+
+/*
+ * Update reset type to "system" (full chip) to fix warm reboot hang issue
+ * when reset type is set to default ("soc", gated by reset mask registers).
+ */
+&wdt1 {
+ status = "okay";
+ aspeed,reset-type = "system";
+};
+
+/*
+ * wdt2 is not used by Backpack CMM.
+ */
+&wdt2 {
+ status = "disabled";
+};
+
+&fmc {
+ status = "okay";
+ flash at 0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "bmc";
+#include "facebook-bmc-flash-layout.dtsi"
+ };
+};
+
+&uart1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd1_default
+ &pinctrl_rxd1_default
+ &pinctrl_ncts1_default
+ &pinctrl_ndcd1_default
+ &pinctrl_ndsr1_default
+ &pinctrl_ndtr1_default
+ &pinctrl_nrts1_default>;
+};
+
+&uart3 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd3_default
+ &pinctrl_rxd3_default
+ &pinctrl_ncts3_default
+ &pinctrl_ndcd3_default
+ &pinctrl_nri3_default>;
+};
+
+&uart4 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd4_default
+ &pinctrl_rxd4_default>;
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&mac1 {
+ status = "okay";
+ no-hw-checksum;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+/*
+ * I2C bus reserved for communication with COM-E.
+ */
+&i2c0 {
+ status = "okay";
+};
+
+/*
+ * I2C bus to Line Cards and Fabric Cards.
+ */
+&i2c1 {
+ status = "okay";
+
+ i2c-switch at 77 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x77>;
+
+ imux16: i2c at 0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux17: i2c at 1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux18: i2c at 2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux19: i2c at 3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux20: i2c at 4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux21: i2c at 5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux22: i2c at 6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux23: i2c at 7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+};
+
+/*
+ * I2C bus to Power Distribution Board.
+ */
+&i2c2 {
+ status = "okay";
+
+ i2c-switch at 71 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x71>;
+
+ imux24: i2c at 0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux25: i2c at 1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux26: i2c at 2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux27: i2c at 3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux28: i2c at 4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux29: i2c at 5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux30: i2c at 6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux31: i2c at 7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+};
+
+/*
+ * I2c bus connected with temperature sensors on CMM.
+ */
+&i2c3 {
+ status = "okay";
+};
+
+/*
+ * I2C bus reserved for communication with COM-E.
+ */
+&i2c4 {
+ status = "okay";
+};
+
+/*
+ * I2c bus connected with ADM1278.
+ */
+&i2c5 {
+ status = "okay";
+};
+
+/*
+ * I2c bus connected with I/O Expander.
+ */
+&i2c6 {
+ status = "okay";
+};
+
+/*
+ * I2c bus connected with I/O Expander and EPROMs.
+ */
+&i2c7 {
+ status = "okay";
+};
+
+/*
+ * I2C bus to Fan Control Board.
+ */
+&i2c8 {
+ status = "okay";
+
+ i2c-switch at 77 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x77>;
+
+ imux32: i2c at 0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux33: i2c at 1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux34: i2c at 2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux35: i2c at 3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux36: i2c at 4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux37: i2c at 5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux38: i2c at 6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux39: i2c at 7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+};
+
+/*
+ * I2C bus to CMM CPLD.
+ */
+&i2c13 {
+ status = "okay";
+};
+
+&adc {
+ status = "okay";
+};
--
2.17.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH v3 2/2] ARM: dts: aspeed: Add Facebook Backpack-CMM BMC
2018-11-09 0:50 ` Tao Ren
@ 2018-12-02 22:58 ` Joel Stanley
-1 siblings, 0 replies; 6+ messages in thread
From: Joel Stanley @ 2018-12-02 22:58 UTC (permalink / raw)
To: Tao Ren; +Cc: Andrew Jeffery, Linux ARM, linux-aspeed, OpenBMC Maillist
On Fri, 9 Nov 2018 at 11:20, Tao Ren <taoren@fb.com> wrote:
>
> Add initial version of device tree file for Facebook Backpack CMM
> (Chasis Management Module) ast2500 BMC.
>
> Signed-off-by: Tao Ren <taoren@fb.com>
> ---
> Changes in v3:
> - including pin configurations in UARTs 1-4 device nodes explicitly.
> - including external pinctrl controller nodes gfx and lhc explicitly.
> - deleting misleading i2c-related statements from commit messages, and
> adding comments for i2c buses in the board device tree file.
> Changes in v2:
> - including "aspeed-bmc-facebook-cmm.dtb" in Makefile.
>
Thanks. I've merged v3 for inclusion in 4.21.
Cheers,
Joel
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v3 2/2] ARM: dts: aspeed: Add Facebook Backpack-CMM BMC
@ 2018-12-02 22:58 ` Joel Stanley
0 siblings, 0 replies; 6+ messages in thread
From: Joel Stanley @ 2018-12-02 22:58 UTC (permalink / raw)
To: Tao Ren; +Cc: Andrew Jeffery, OpenBMC Maillist, linux-aspeed, Linux ARM
On Fri, 9 Nov 2018 at 11:20, Tao Ren <taoren@fb.com> wrote:
>
> Add initial version of device tree file for Facebook Backpack CMM
> (Chasis Management Module) ast2500 BMC.
>
> Signed-off-by: Tao Ren <taoren@fb.com>
> ---
> Changes in v3:
> - including pin configurations in UARTs 1-4 device nodes explicitly.
> - including external pinctrl controller nodes gfx and lhc explicitly.
> - deleting misleading i2c-related statements from commit messages, and
> adding comments for i2c buses in the board device tree file.
> Changes in v2:
> - including "aspeed-bmc-facebook-cmm.dtb" in Makefile.
>
Thanks. I've merged v3 for inclusion in 4.21.
Cheers,
Joel
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v3 2/2] ARM: dts: aspeed: Add Facebook Backpack-CMM BMC
2018-12-02 22:58 ` Joel Stanley
@ 2018-12-07 0:55 ` Tao Ren
-1 siblings, 0 replies; 6+ messages in thread
From: Tao Ren @ 2018-12-07 0:55 UTC (permalink / raw)
To: Joel Stanley; +Cc: Andrew Jeffery, Linux ARM, linux-aspeed, OpenBMC Maillist
On 12/2/18, 2:59 PM, "Joel Stanley" <joel@jms.id.au> wrote:
> On Fri, 9 Nov 2018 at 11:20, Tao Ren <taoren@fb.com> wrote:
>>
>> Add initial version of device tree file for Facebook Backpack CMM
>> (Chasis Management Module) ast2500 BMC.
>>
>> Signed-off-by: Tao Ren <taoren@fb.com>
>
> Thanks. I've merged v3 for inclusion in 4.21.
Thank you Joel!
Cheers,
Tao
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v3 2/2] ARM: dts: aspeed: Add Facebook Backpack-CMM BMC
@ 2018-12-07 0:55 ` Tao Ren
0 siblings, 0 replies; 6+ messages in thread
From: Tao Ren @ 2018-12-07 0:55 UTC (permalink / raw)
To: Joel Stanley; +Cc: Andrew Jeffery, OpenBMC Maillist, linux-aspeed, Linux ARM
On 12/2/18, 2:59 PM, "Joel Stanley" <joel@jms.id.au> wrote:
> On Fri, 9 Nov 2018 at 11:20, Tao Ren <taoren@fb.com> wrote:
>>
>> Add initial version of device tree file for Facebook Backpack CMM
>> (Chasis Management Module) ast2500 BMC.
>>
>> Signed-off-by: Tao Ren <taoren@fb.com>
>
> Thanks. I've merged v3 for inclusion in 4.21.
Thank you Joel!
Cheers,
Tao
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2018-12-07 0:56 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-11-09 0:50 [PATCH v3 2/2] ARM: dts: aspeed: Add Facebook Backpack-CMM BMC Tao Ren
2018-11-09 0:50 ` Tao Ren
2018-12-02 22:58 ` Joel Stanley
2018-12-02 22:58 ` Joel Stanley
2018-12-07 0:55 ` Tao Ren
2018-12-07 0:55 ` Tao Ren
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.