All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH linux dev-5.2 v1] ARM-dts-aspeed-Add-Mihawk-GPIO-Line-Names
@ 2021-03-30  2:08 ` Nichole Wang
  0 siblings, 0 replies; 7+ messages in thread
From: Nichole Wang @ 2021-03-30  2:08 UTC (permalink / raw)
  To: linux-kernel
  Cc: Rob Herring, Mark Rutland, Joel Stanley, Andrew Jeffery,
	devicetree, linux-arm-kernel, linux-aspeed, openbmc, small84206,
	Ben_Pai, Nichole Wang

Name the GPIOs to help userspace work with them. The names describe the
functionality the lines provide, not the net or ball name. This makes it
easier to share userspace code across different systems and makes the
use of the lines more obvious.

Signed-off-by: Nichole Wang <Nichole_Wang@wistron.com>
---
 arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts | 33 +++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
index 577c211..15c1f0a 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
@@ -383,6 +383,39 @@
 	};
 };
 
+&gpio {
+	gpio-line-names =
+	/*A0-A7*/	"","cfam-reset","","","","","","",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"fsi-enable","","","","","","","",
+	/*E0-E7*/	"","","","","","fsi-mux","fsi-clock","fsi-data",
+	/*F0-F7*/	"","id-button","","","","","air-water","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","checkstop","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","fsi-trans","","","","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"presence-ps1","","presence-ps0","","","","","",
+	/*AA0-AA7*/	"led-front-fault","power-button","led-front-id","","","","","",
+	/*AB0-AB7*/	"","","","","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+};
+
 &fmc {
 	status = "okay";
 	flash@0 {
-- 
2.7.4


^ permalink raw reply related	[flat|nested] 7+ messages in thread

* [PATCH linux dev-5.2 v1] ARM-dts-aspeed-Add-Mihawk-GPIO-Line-Names
@ 2021-03-30  2:08 ` Nichole Wang
  0 siblings, 0 replies; 7+ messages in thread
From: Nichole Wang @ 2021-03-30  2:08 UTC (permalink / raw)
  To: linux-kernel
  Cc: Rob Herring, Mark Rutland, Joel Stanley, Andrew Jeffery,
	devicetree, linux-arm-kernel, linux-aspeed, openbmc, small84206,
	Ben_Pai, Nichole Wang

Name the GPIOs to help userspace work with them. The names describe the
functionality the lines provide, not the net or ball name. This makes it
easier to share userspace code across different systems and makes the
use of the lines more obvious.

Signed-off-by: Nichole Wang <Nichole_Wang@wistron.com>
---
 arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts | 33 +++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
index 577c211..15c1f0a 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
@@ -383,6 +383,39 @@
 	};
 };
 
+&gpio {
+	gpio-line-names =
+	/*A0-A7*/	"","cfam-reset","","","","","","",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"fsi-enable","","","","","","","",
+	/*E0-E7*/	"","","","","","fsi-mux","fsi-clock","fsi-data",
+	/*F0-F7*/	"","id-button","","","","","air-water","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","checkstop","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","fsi-trans","","","","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"presence-ps1","","presence-ps0","","","","","",
+	/*AA0-AA7*/	"led-front-fault","power-button","led-front-id","","","","","",
+	/*AB0-AB7*/	"","","","","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+};
+
 &fmc {
 	status = "okay";
 	flash@0 {
-- 
2.7.4


---------------------------------------------------------------------------------------------------------------------------------------------------------------
This email contains confidential or legally privileged information and is for the sole use of its intended recipient. 
Any unauthorized review, use, copying or distribution of this email or the content of this email is strictly prohibited.
If you are not the intended recipient, you may reply to the sender and should delete this e-mail immediately.
---------------------------------------------------------------------------------------------------------------------------------------------------------------


^ permalink raw reply related	[flat|nested] 7+ messages in thread

* [PATCH linux dev-5.2 v1] ARM-dts-aspeed-Add-Mihawk-GPIO-Line-Names
@ 2021-03-30  2:08 ` Nichole Wang
  0 siblings, 0 replies; 7+ messages in thread
From: Nichole Wang @ 2021-03-30  2:08 UTC (permalink / raw)
  To: linux-kernel
  Cc: Mark Rutland, devicetree, Ben_Pai, linux-aspeed, Andrew Jeffery,
	openbmc, Nichole Wang, Rob Herring, small84206, linux-arm-kernel

Name the GPIOs to help userspace work with them. The names describe the
functionality the lines provide, not the net or ball name. This makes it
easier to share userspace code across different systems and makes the
use of the lines more obvious.

Signed-off-by: Nichole Wang <Nichole_Wang@wistron.com>
---
 arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts | 33 +++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
index 577c211..15c1f0a 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
@@ -383,6 +383,39 @@
 	};
 };
 
+&gpio {
+	gpio-line-names =
+	/*A0-A7*/	"","cfam-reset","","","","","","",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"fsi-enable","","","","","","","",
+	/*E0-E7*/	"","","","","","fsi-mux","fsi-clock","fsi-data",
+	/*F0-F7*/	"","id-button","","","","","air-water","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","checkstop","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","fsi-trans","","","","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"presence-ps1","","presence-ps0","","","","","",
+	/*AA0-AA7*/	"led-front-fault","power-button","led-front-id","","","","","",
+	/*AB0-AB7*/	"","","","","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+};
+
 &fmc {
 	status = "okay";
 	flash@0 {
-- 
2.7.4


---------------------------------------------------------------------------------------------------------------------------------------------------------------
This email contains confidential or legally privileged information and is for the sole use of its intended recipient. 
Any unauthorized review, use, copying or distribution of this email or the content of this email is strictly prohibited.
If you are not the intended recipient, you may reply to the sender and should delete this e-mail immediately.
---------------------------------------------------------------------------------------------------------------------------------------------------------------


^ permalink raw reply related	[flat|nested] 7+ messages in thread

* [PATCH linux dev-5.2 v1] ARM-dts-aspeed-Add-Mihawk-GPIO-Line-Names
@ 2021-03-30  2:08 ` Nichole Wang
  0 siblings, 0 replies; 7+ messages in thread
From: Nichole Wang @ 2021-03-30  2:08 UTC (permalink / raw)
  To: linux-kernel
  Cc: Rob Herring, Mark Rutland, Joel Stanley, Andrew Jeffery,
	devicetree, linux-arm-kernel, linux-aspeed, openbmc, small84206,
	Ben_Pai, Nichole Wang

Name the GPIOs to help userspace work with them. The names describe the
functionality the lines provide, not the net or ball name. This makes it
easier to share userspace code across different systems and makes the
use of the lines more obvious.

Signed-off-by: Nichole Wang <Nichole_Wang@wistron.com>
---
 arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts | 33 +++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
index 577c211..15c1f0a 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
@@ -383,6 +383,39 @@
 	};
 };
 
+&gpio {
+	gpio-line-names =
+	/*A0-A7*/	"","cfam-reset","","","","","","",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"fsi-enable","","","","","","","",
+	/*E0-E7*/	"","","","","","fsi-mux","fsi-clock","fsi-data",
+	/*F0-F7*/	"","id-button","","","","","air-water","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","checkstop","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","fsi-trans","","","","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"presence-ps1","","presence-ps0","","","","","",
+	/*AA0-AA7*/	"led-front-fault","power-button","led-front-id","","","","","",
+	/*AB0-AB7*/	"","","","","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+};
+
 &fmc {
 	status = "okay";
 	flash@0 {
-- 
2.7.4


---------------------------------------------------------------------------------------------------------------------------------------------------------------
This email contains confidential or legally privileged information and is for the sole use of its intended recipient. 
Any unauthorized review, use, copying or distribution of this email or the content of this email is strictly prohibited.
If you are not the intended recipient, you may reply to the sender and should delete this e-mail immediately.
---------------------------------------------------------------------------------------------------------------------------------------------------------------


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 7+ messages in thread

* Re: [PATCH linux dev-5.2 v1] ARM-dts-aspeed-Add-Mihawk-GPIO-Line-Names
  2021-03-30  2:08 ` Nichole Wang
  (?)
@ 2021-03-31  7:37   ` Joel Stanley
  -1 siblings, 0 replies; 7+ messages in thread
From: Joel Stanley @ 2021-03-31  7:37 UTC (permalink / raw)
  To: Nichole Wang
  Cc: Linux Kernel Mailing List, Rob Herring, Mark Rutland,
	Andrew Jeffery, devicetree, Linux ARM, linux-aspeed,
	OpenBMC Maillist, small84206, Ben Pai

On Tue, 30 Mar 2021 at 02:09, Nichole Wang <Nichole_Wang@wistron.com> wrote:
>
> Name the GPIOs to help userspace work with them. The names describe the
> functionality the lines provide, not the net or ball name. This makes it
> easier to share userspace code across different systems and makes the
> use of the lines more obvious.
>
> Signed-off-by: Nichole Wang <Nichole_Wang@wistron.com>

Thanks for the patch. The syntax is good, and I will assume the
information is correct. I will apply it to the tree.

Reviewed-by: Joel Stanley <joel@jms.id.au>

Cheers,

Joel



> ---
>  arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts | 33 +++++++++++++++++++++++++++++
>  1 file changed, 33 insertions(+)
>
> diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
> index 577c211..15c1f0a 100644
> --- a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
> +++ b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
> @@ -383,6 +383,39 @@
>         };
>  };
>
> +&gpio {
> +       gpio-line-names =
> +       /*A0-A7*/       "","cfam-reset","","","","","","",
> +       /*B0-B7*/       "","","","","","","","",
> +       /*C0-C7*/       "","","","","","","","",
> +       /*D0-D7*/       "fsi-enable","","","","","","","",
> +       /*E0-E7*/       "","","","","","fsi-mux","fsi-clock","fsi-data",
> +       /*F0-F7*/       "","id-button","","","","","air-water","",
> +       /*G0-G7*/       "","","","","","","","",
> +       /*H0-H7*/       "","","","","","","","",
> +       /*I0-I7*/       "","","","","","","","",
> +       /*J0-J7*/       "","","checkstop","","","","","",
> +       /*K0-K7*/       "","","","","","","","",
> +       /*L0-L7*/       "","","","","","","","",
> +       /*M0-M7*/       "","","","","","","","",
> +       /*N0-N7*/       "","","","","","","","",
> +       /*O0-O7*/       "","","","","","","","",
> +       /*P0-P7*/       "","","","","","","","",
> +       /*Q0-Q7*/       "","","","","","","","",
> +       /*R0-R7*/       "","","fsi-trans","","","","","",
> +       /*S0-S7*/       "","","","","","","","",
> +       /*T0-T7*/       "","","","","","","","",
> +       /*U0-U7*/       "","","","","","","","",
> +       /*V0-V7*/       "","","","","","","","",
> +       /*W0-W7*/       "","","","","","","","",
> +       /*X0-X7*/       "","","","","","","","",
> +       /*Y0-Y7*/       "","","","","","","","",
> +       /*Z0-Z7*/       "presence-ps1","","presence-ps0","","","","","",
> +       /*AA0-AA7*/     "led-front-fault","power-button","led-front-id","","","","","",
> +       /*AB0-AB7*/     "","","","","","","","",
> +       /*AC0-AC7*/     "","","","","","","","";
> +};
> +
>  &fmc {
>         status = "okay";
>         flash@0 {
> --
> 2.7.4
>
>
> ---------------------------------------------------------------------------------------------------------------------------------------------------------------
> This email contains confidential or legally privileged information and is for the sole use of its intended recipient.
> Any unauthorized review, use, copying or distribution of this email or the content of this email is strictly prohibited.
> If you are not the intended recipient, you may reply to the sender and should delete this e-mail immediately.
> ---------------------------------------------------------------------------------------------------------------------------------------------------------------
>

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [PATCH linux dev-5.2 v1] ARM-dts-aspeed-Add-Mihawk-GPIO-Line-Names
@ 2021-03-31  7:37   ` Joel Stanley
  0 siblings, 0 replies; 7+ messages in thread
From: Joel Stanley @ 2021-03-31  7:37 UTC (permalink / raw)
  To: Nichole Wang
  Cc: Mark Rutland, devicetree, Ben Pai, linux-aspeed, Andrew Jeffery,
	OpenBMC Maillist, Linux Kernel Mailing List, Rob Herring,
	small84206, Linux ARM

On Tue, 30 Mar 2021 at 02:09, Nichole Wang <Nichole_Wang@wistron.com> wrote:
>
> Name the GPIOs to help userspace work with them. The names describe the
> functionality the lines provide, not the net or ball name. This makes it
> easier to share userspace code across different systems and makes the
> use of the lines more obvious.
>
> Signed-off-by: Nichole Wang <Nichole_Wang@wistron.com>

Thanks for the patch. The syntax is good, and I will assume the
information is correct. I will apply it to the tree.

Reviewed-by: Joel Stanley <joel@jms.id.au>

Cheers,

Joel



> ---
>  arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts | 33 +++++++++++++++++++++++++++++
>  1 file changed, 33 insertions(+)
>
> diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
> index 577c211..15c1f0a 100644
> --- a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
> +++ b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
> @@ -383,6 +383,39 @@
>         };
>  };
>
> +&gpio {
> +       gpio-line-names =
> +       /*A0-A7*/       "","cfam-reset","","","","","","",
> +       /*B0-B7*/       "","","","","","","","",
> +       /*C0-C7*/       "","","","","","","","",
> +       /*D0-D7*/       "fsi-enable","","","","","","","",
> +       /*E0-E7*/       "","","","","","fsi-mux","fsi-clock","fsi-data",
> +       /*F0-F7*/       "","id-button","","","","","air-water","",
> +       /*G0-G7*/       "","","","","","","","",
> +       /*H0-H7*/       "","","","","","","","",
> +       /*I0-I7*/       "","","","","","","","",
> +       /*J0-J7*/       "","","checkstop","","","","","",
> +       /*K0-K7*/       "","","","","","","","",
> +       /*L0-L7*/       "","","","","","","","",
> +       /*M0-M7*/       "","","","","","","","",
> +       /*N0-N7*/       "","","","","","","","",
> +       /*O0-O7*/       "","","","","","","","",
> +       /*P0-P7*/       "","","","","","","","",
> +       /*Q0-Q7*/       "","","","","","","","",
> +       /*R0-R7*/       "","","fsi-trans","","","","","",
> +       /*S0-S7*/       "","","","","","","","",
> +       /*T0-T7*/       "","","","","","","","",
> +       /*U0-U7*/       "","","","","","","","",
> +       /*V0-V7*/       "","","","","","","","",
> +       /*W0-W7*/       "","","","","","","","",
> +       /*X0-X7*/       "","","","","","","","",
> +       /*Y0-Y7*/       "","","","","","","","",
> +       /*Z0-Z7*/       "presence-ps1","","presence-ps0","","","","","",
> +       /*AA0-AA7*/     "led-front-fault","power-button","led-front-id","","","","","",
> +       /*AB0-AB7*/     "","","","","","","","",
> +       /*AC0-AC7*/     "","","","","","","","";
> +};
> +
>  &fmc {
>         status = "okay";
>         flash@0 {
> --
> 2.7.4
>
>
> ---------------------------------------------------------------------------------------------------------------------------------------------------------------
> This email contains confidential or legally privileged information and is for the sole use of its intended recipient.
> Any unauthorized review, use, copying or distribution of this email or the content of this email is strictly prohibited.
> If you are not the intended recipient, you may reply to the sender and should delete this e-mail immediately.
> ---------------------------------------------------------------------------------------------------------------------------------------------------------------
>

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [PATCH linux dev-5.2 v1] ARM-dts-aspeed-Add-Mihawk-GPIO-Line-Names
@ 2021-03-31  7:37   ` Joel Stanley
  0 siblings, 0 replies; 7+ messages in thread
From: Joel Stanley @ 2021-03-31  7:37 UTC (permalink / raw)
  To: Nichole Wang
  Cc: Linux Kernel Mailing List, Rob Herring, Mark Rutland,
	Andrew Jeffery, devicetree, Linux ARM, linux-aspeed,
	OpenBMC Maillist, small84206, Ben Pai

On Tue, 30 Mar 2021 at 02:09, Nichole Wang <Nichole_Wang@wistron.com> wrote:
>
> Name the GPIOs to help userspace work with them. The names describe the
> functionality the lines provide, not the net or ball name. This makes it
> easier to share userspace code across different systems and makes the
> use of the lines more obvious.
>
> Signed-off-by: Nichole Wang <Nichole_Wang@wistron.com>

Thanks for the patch. The syntax is good, and I will assume the
information is correct. I will apply it to the tree.

Reviewed-by: Joel Stanley <joel@jms.id.au>

Cheers,

Joel



> ---
>  arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts | 33 +++++++++++++++++++++++++++++
>  1 file changed, 33 insertions(+)
>
> diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
> index 577c211..15c1f0a 100644
> --- a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
> +++ b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
> @@ -383,6 +383,39 @@
>         };
>  };
>
> +&gpio {
> +       gpio-line-names =
> +       /*A0-A7*/       "","cfam-reset","","","","","","",
> +       /*B0-B7*/       "","","","","","","","",
> +       /*C0-C7*/       "","","","","","","","",
> +       /*D0-D7*/       "fsi-enable","","","","","","","",
> +       /*E0-E7*/       "","","","","","fsi-mux","fsi-clock","fsi-data",
> +       /*F0-F7*/       "","id-button","","","","","air-water","",
> +       /*G0-G7*/       "","","","","","","","",
> +       /*H0-H7*/       "","","","","","","","",
> +       /*I0-I7*/       "","","","","","","","",
> +       /*J0-J7*/       "","","checkstop","","","","","",
> +       /*K0-K7*/       "","","","","","","","",
> +       /*L0-L7*/       "","","","","","","","",
> +       /*M0-M7*/       "","","","","","","","",
> +       /*N0-N7*/       "","","","","","","","",
> +       /*O0-O7*/       "","","","","","","","",
> +       /*P0-P7*/       "","","","","","","","",
> +       /*Q0-Q7*/       "","","","","","","","",
> +       /*R0-R7*/       "","","fsi-trans","","","","","",
> +       /*S0-S7*/       "","","","","","","","",
> +       /*T0-T7*/       "","","","","","","","",
> +       /*U0-U7*/       "","","","","","","","",
> +       /*V0-V7*/       "","","","","","","","",
> +       /*W0-W7*/       "","","","","","","","",
> +       /*X0-X7*/       "","","","","","","","",
> +       /*Y0-Y7*/       "","","","","","","","",
> +       /*Z0-Z7*/       "presence-ps1","","presence-ps0","","","","","",
> +       /*AA0-AA7*/     "led-front-fault","power-button","led-front-id","","","","","",
> +       /*AB0-AB7*/     "","","","","","","","",
> +       /*AC0-AC7*/     "","","","","","","","";
> +};
> +
>  &fmc {
>         status = "okay";
>         flash@0 {
> --
> 2.7.4
>
>
> ---------------------------------------------------------------------------------------------------------------------------------------------------------------
> This email contains confidential or legally privileged information and is for the sole use of its intended recipient.
> Any unauthorized review, use, copying or distribution of this email or the content of this email is strictly prohibited.
> If you are not the intended recipient, you may reply to the sender and should delete this e-mail immediately.
> ---------------------------------------------------------------------------------------------------------------------------------------------------------------
>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, other threads:[~2021-03-31  7:39 UTC | newest]

Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-03-30  2:08 [PATCH linux dev-5.2 v1] ARM-dts-aspeed-Add-Mihawk-GPIO-Line-Names Nichole Wang
2021-03-30  2:08 ` Nichole Wang
2021-03-30  2:08 ` Nichole Wang
2021-03-30  2:08 ` Nichole Wang
2021-03-31  7:37 ` Joel Stanley
2021-03-31  7:37   ` Joel Stanley
2021-03-31  7:37   ` Joel Stanley

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.