From mboxrd@z Thu Jan 1 00:00:00 1970 From: Joel Stanley Date: Mon, 10 Feb 2020 02:32:46 +0000 Subject: [Buildroot] [PATCH v4 1/9] configs/qemu_ppc_mac99_defconfig: add usual comments for Kconfig symbols In-Reply-To: <20200209180327.455426-2-romain.naour@smile.fr> References: <20200209180327.455426-1-romain.naour@smile.fr> <20200209180327.455426-2-romain.naour@smile.fr> Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net On Sun, 9 Feb 2020 at 18:03, Romain Naour wrote: > > This defconfig was generated by savedefconfig but we usually > use a manually modified defconfig to add some comments for > Kconfig symbols. > > No content change intended. > > Signed-off-by: Romain Naour > Cc: Joel Stanley I dislike this is as it means the file must be manually updated, but if this is preferred then ok. Acked-by: Joel Stanley > --- > configs/qemu_ppc_mac99_defconfig | 13 ++++++++++++- > 1 file changed, 12 insertions(+), 1 deletion(-) > > diff --git a/configs/qemu_ppc_mac99_defconfig b/configs/qemu_ppc_mac99_defconfig > index 9a33c3d82c..4a7c7ce599 100644 > --- a/configs/qemu_ppc_mac99_defconfig > +++ b/configs/qemu_ppc_mac99_defconfig > @@ -1,8 +1,14 @@ > +# Architecture > BR2_powerpc=y > BR2_powerpc_7400=y > -BR2_TARGET_GENERIC_GETTY_PORT="ttyS0" > + > +# System > BR2_SYSTEM_DHCP="eth0" > + > +# Linux headers same as kernel, a 5.2 series > BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_2=y > + > +# Kernel > BR2_LINUX_KERNEL=y > BR2_LINUX_KERNEL_CUSTOM_VERSION=y > BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.2.4" > @@ -10,6 +16,11 @@ BR2_LINUX_KERNEL_DEFCONFIG="pmac32" > BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/qemu/ppc-mac99/linux.fragment" > BR2_LINUX_KERNEL_VMLINUX=y > BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y > + > +# Serial port config > +BR2_TARGET_GENERIC_GETTY_PORT="ttyS0" > + > +# Filesystem > BR2_TARGET_ROOTFS_CPIO=y > BR2_TARGET_ROOTFS_EXT2=y > # BR2_TARGET_ROOTFS_TAR is not set > -- > 2.24.1 >