From: Linus Walleij <linus.walleij@linaro.org>
To: Sander Vanheule <sander@svanheule.net>
Cc: Pavel Machek <pavel@ucw.cz>, Rob Herring <robh+dt@kernel.org>,
Lee Jones <lee.jones@linaro.org>,
Michael Walle <michael@walle.cc>,
Andy Shevchenko <andy.shevchenko@gmail.com>,
Linux LED Subsystem <linux-leds@vger.kernel.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@vger.kernel.org>,
"open list:GPIO SUBSYSTEM" <linux-gpio@vger.kernel.org>,
Hans de Goede <hdegoede@redhat.com>, Andrew Lunn <andrew@lunn.ch>,
linux-kernel <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v4 4/5] pinctrl: Add RTL8231 pin control and GPIO support
Date: Sat, 5 Jun 2021 00:10:03 +0200 [thread overview]
Message-ID: <CACRpkdYzhC=Lt5CKpbZNK81z=0CRp2CknMqp=zk8cHVfo0wm0g@mail.gmail.com> (raw)
In-Reply-To: <5d184778a6562e24abfa6e5dd2f7dbde4fede3fe.1622713678.git.sander@svanheule.net>
On Thu, Jun 3, 2021 at 12:01 PM Sander Vanheule <sander@svanheule.net> wrote:
> This driver implements the GPIO and pin muxing features provided by the
> RTL8231. The device should be instantiated as an MFD child, where the
> parent device has already configured the regmap used for register
> access.
>
> Debouncing is only available for the six highest GPIOs, and must be
> emulated when other pins are used for (button) inputs. Although
> described in the bindings, drive strength selection is currently not
> implemented.
>
> Signed-off-by: Sander Vanheule <sander@svanheule.net>
Wow this looks really good. Thanks for going the extra mile
and fix this. Special thanks to Andy for the thorough review.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Yours,
Linus Walleij
next prev parent reply other threads:[~2021-06-04 22:10 UTC|newest]
Thread overview: 124+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-11 12:25 [PATCH 0/5] RTL8231 GPIO expander support Sander Vanheule
2021-05-11 12:25 ` [PATCH 1/5] dt-bindings: leds: Binding for RTL8231 scan matrix Sander Vanheule
2021-05-17 22:31 ` Rob Herring
2021-05-19 16:39 ` Sander Vanheule
2021-05-11 12:25 ` [PATCH 2/5] dt-bindings: mfd: Binding for RTL8231 Sander Vanheule
2021-05-17 22:38 ` Rob Herring
2021-05-19 16:53 ` Sander Vanheule
2021-05-11 12:25 ` [PATCH 3/5] mfd: Add RTL8231 core device Sander Vanheule
2021-05-12 12:29 ` kernel test robot
2021-05-12 12:29 ` kernel test robot
2021-05-12 13:13 ` kernel test robot
2021-05-12 13:13 ` kernel test robot
2021-05-19 14:58 ` Lee Jones
2021-05-19 14:58 ` Lee Jones
2021-05-19 15:11 ` Sander Vanheule
2021-05-19 15:11 ` Sander Vanheule
2021-05-11 12:25 ` [PATCH 4/5] pinctrl: Add RTL8231 pin control and GPIO support Sander Vanheule
2021-05-11 12:25 ` [PATCH 5/5] leds: Add support for RTL8231 LED scan matrix Sander Vanheule
[not found] ` <CAHp75VffoKyyPJbdtKMLx575c9LT0S8+EHOk7Mw36j=aTL6Q4Q@mail.gmail.com>
2021-05-16 21:40 ` [PATCH 0/5] RTL8231 GPIO expander support Sander Vanheule
2021-05-17 8:13 ` Andy Shevchenko
2021-05-17 8:50 ` Sander Vanheule
2021-05-17 19:32 ` Sander Vanheule
2021-05-17 19:28 ` [PATCH v2 0/7] " Sander Vanheule
2021-05-17 19:28 ` [PATCH v2 1/7] regmap: Add MDIO bus support Sander Vanheule
2021-05-19 16:12 ` Mark Brown
2021-05-17 19:28 ` [PATCH v2 2/7] gpio: regmap: Add configurable dir/value order Sander Vanheule
2021-05-17 21:06 ` Andy Shevchenko
2021-05-18 1:40 ` Andrew Lunn
2021-05-18 11:39 ` Sander Vanheule
2021-05-23 22:21 ` Sander Vanheule
2021-05-18 8:39 ` Michael Walle
2021-05-18 10:39 ` Andy Shevchenko
2021-05-23 21:19 ` Sander Vanheule
2021-05-17 19:28 ` [PATCH v2 3/7] dt-bindings: leds: Binding for RTL8231 scan matrix Sander Vanheule
2021-05-17 19:28 ` [PATCH v2 4/7] dt-bindings: mfd: Binding for RTL8231 Sander Vanheule
2021-05-18 22:02 ` Linus Walleij
2021-05-17 19:28 ` [PATCH v2 5/7] mfd: Add RTL8231 core device Sander Vanheule
2021-05-17 21:18 ` Andy Shevchenko
2021-05-23 21:28 ` Sander Vanheule
2021-05-24 7:49 ` Andy Shevchenko
2021-05-24 7:50 ` Sander Vanheule
2021-05-24 7:55 ` Andy Shevchenko
2021-05-24 8:04 ` Sander Vanheule
2021-05-17 19:28 ` [PATCH v2 6/7] pinctrl: Add RTL8231 pin control and GPIO support Sander Vanheule
2021-05-17 21:42 ` Andy Shevchenko
2021-05-17 21:46 ` Andy Shevchenko
2021-05-23 21:42 ` Sander Vanheule
2021-05-17 19:28 ` [PATCH v2 7/7] leds: Add support for RTL8231 LED scan matrix Sander Vanheule
2021-05-17 22:00 ` Andy Shevchenko
2021-05-23 21:53 ` Sander Vanheule
2021-05-19 16:10 ` (subset) [PATCH v2 0/7] RTL8231 GPIO expander support Mark Brown
2021-05-23 22:33 ` [PATCH v3 0/6] " Sander Vanheule
2021-05-23 22:33 ` [PATCH v3 1/6] gpio: regmap: Add quirk for output data register Sander Vanheule
2021-05-28 6:40 ` Michael Walle
2021-06-03 10:03 ` Sander Vanheule
2021-05-31 7:25 ` Bartosz Golaszewski
2021-05-23 22:34 ` [PATCH v3 2/6] dt-bindings: leds: Binding for RTL8231 scan matrix Sander Vanheule
2021-06-02 18:58 ` Rob Herring
2021-05-23 22:34 ` [PATCH v3 3/6] dt-bindings: mfd: Binding for RTL8231 Sander Vanheule
2021-05-27 23:31 ` Linus Walleij
2021-06-02 19:02 ` Rob Herring
2021-05-23 22:34 ` [PATCH v3 4/6] mfd: Add RTL8231 core device Sander Vanheule
2021-05-24 8:02 ` Andy Shevchenko
2021-05-24 8:23 ` Sander Vanheule
2021-05-24 10:18 ` Andy Shevchenko
2021-05-24 11:41 ` Sander Vanheule
2021-05-23 22:34 ` [PATCH v3 5/6] pinctrl: Add RTL8231 pin control and GPIO support Sander Vanheule
[not found] ` <CAHp75VfCCFd9SQwqv-JhdHMudYWdaa1tcVp4ZNescioWTaoXFQ@mail.gmail.com>
2021-05-24 11:32 ` Andy Shevchenko
2021-05-24 11:39 ` Sander Vanheule
2021-05-28 6:29 ` Michael Walle
2021-05-28 6:42 ` Sander Vanheule
2021-05-28 6:43 ` Michael Walle
2021-05-23 22:34 ` [PATCH v3 6/6] leds: Add support for RTL8231 LED scan matrix Sander Vanheule
2021-05-24 10:24 ` Andy Shevchenko
2021-05-24 12:04 ` Sander Vanheule
2021-05-24 12:47 ` Andy Shevchenko
2021-05-24 15:30 ` Sander Vanheule
2021-05-24 1:10 ` [PATCH v3 0/6] RTL8231 GPIO expander support Andrew Lunn
2021-05-24 7:53 ` Andy Shevchenko
2021-05-24 11:41 ` Sander Vanheule
2021-05-24 12:54 ` Andy Shevchenko
2021-05-24 15:03 ` Sander Vanheule
2021-05-24 16:30 ` Andy Shevchenko
2021-05-25 17:11 ` Andy Shevchenko
2021-05-25 18:00 ` Sander Vanheule
2021-05-26 21:02 ` Sander Vanheule
2021-05-27 10:38 ` Andy Shevchenko
2021-05-27 10:41 ` Hans de Goede
2021-05-24 15:20 ` Sander Vanheule
2021-05-28 6:37 ` Michael Walle
2021-05-30 16:19 ` Sander Vanheule
2021-05-30 16:51 ` Hans de Goede
2021-05-30 18:16 ` Andy Shevchenko
2021-05-30 21:22 ` Michael Walle
2021-05-31 8:36 ` Sander Vanheule
2021-05-31 10:02 ` Michael Walle
[not found] ` <CAHp75VfOrUBRQH1vrXEwHN4ZPojQfQju-_wp_3djZeozEaatug@mail.gmail.com>
2021-05-31 15:33 ` [PATCH 0/5] " Sander Vanheule
2021-05-31 15:48 ` Andy Shevchenko
2021-06-01 11:49 ` Michael Walle
2021-06-01 15:24 ` Andy Shevchenko
2021-06-02 20:20 ` Sander Vanheule
2021-06-01 9:59 ` [PATCH v3 0/6] " Linus Walleij
2021-06-01 10:18 ` Michael Walle
2021-06-01 10:51 ` Linus Walleij
2021-06-01 11:41 ` Michael Walle
2021-06-01 11:48 ` Linus Walleij
2021-06-03 10:00 ` [PATCH v4 0/5] " Sander Vanheule
2021-06-03 10:00 ` [PATCH v4 1/5] dt-bindings: leds: Binding for RTL8231 scan matrix Sander Vanheule
2021-06-03 10:00 ` [PATCH v4 2/5] dt-bindings: mfd: Binding for RTL8231 Sander Vanheule
2021-06-03 10:00 ` [PATCH v4 3/5] mfd: Add RTL8231 core device Sander Vanheule
2021-06-03 10:58 ` Andy Shevchenko
2021-06-03 11:28 ` Sander Vanheule
2021-06-03 14:03 ` Andrew Lunn
2021-06-03 15:20 ` Sander Vanheule
2021-06-05 11:07 ` Sander Vanheule
2021-06-03 10:00 ` [PATCH v4 4/5] pinctrl: Add RTL8231 pin control and GPIO support Sander Vanheule
2021-06-03 10:18 ` Andy Shevchenko
2021-06-03 15:58 ` kernel test robot
2021-06-03 15:58 ` kernel test robot
2021-06-04 7:00 ` Sander Vanheule
2021-06-04 7:00 ` Sander Vanheule
2021-06-04 22:10 ` Linus Walleij [this message]
2021-06-03 10:00 ` [PATCH v4 5/5] leds: Add support for RTL8231 LED scan matrix Sander Vanheule
2021-06-03 11:01 ` Andy Shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CACRpkdYzhC=Lt5CKpbZNK81z=0CRp2CknMqp=zk8cHVfo0wm0g@mail.gmail.com' \
--to=linus.walleij@linaro.org \
--cc=andrew@lunn.ch \
--cc=andy.shevchenko@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=hdegoede@redhat.com \
--cc=lee.jones@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=michael@walle.cc \
--cc=pavel@ucw.cz \
--cc=robh+dt@kernel.org \
--cc=sander@svanheule.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.