From mboxrd@z Thu Jan 1 00:00:00 1970 From: David Park Date: Mon, 27 Jul 2020 13:10:33 -0700 Subject: [Buildroot] pc defconfig image does not boot In-Reply-To: <871rkxwemd.fsf@dell.be.48ers.dk> References: <871rkxwemd.fsf@dell.be.48ers.dk> Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net I do not see any build errors whatsoever. I tried increasing the image size to 1024m but still the same issue. My machine is a Core i7-4770 with 8GB of RAM. I also tried another machine even more capable but seeing the same result. -- On Mon, Jul 27, 2020 at 1:23 AM Peter Korsgaard wrote: > >>>>> "David" == David Park writes: > > > Hi, > > I created a PC disk.img from the pc_x86_64_efi_defconfig config file > > following exactly the instructions outlined in board/pc/readme.txt. > > > make pc_x86_64_efi_defconfig > > > Running this disk.img in qemu boots fine with no issues, but when I > write > > the image to a pendrive using the listed commands: > > > dd if=output/images/disk.img of=/dev/sdc; sync > > > And then insert it into my PC, it doesn't boot all the way. I only see > the > > GRUB menu with the Buildroot image listed, but when GRUB tries to run > this > > image, I only see "Booting Buildroot", and then nothing else. > > If it boots with qemu, then the image is probably fine. > > What are the specs of the PC that you are trying to boot it on? > > -- > Bye, Peter Korsgaard > -------------- next part -------------- An HTML attachment was scrubbed... URL: