From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: MIME-Version: 1.0 In-Reply-To: <1334116936-16171-1-git-send-email-hemant.gupta@stericsson.com> References: <1334116936-16171-1-git-send-email-hemant.gupta@stericsson.com> Date: Wed, 11 Apr 2012 09:43:31 +0530 Message-ID: Subject: Re: [PATCH v4] Bluetooth: Fix packet type for ESCO Link From: Hemant Gupta To: Marcel Holtmann , Johan Hedberg , gustavo@padovan.org Cc: linux-bluetooth@vger.kernel.org, Hemant Gupta Content-Type: text/plain; charset=ISO-8859-1 Sender: linux-bluetooth-owner@vger.kernel.org List-ID: Hi Marcel, Johan, Gustavo, On Wed, Apr 11, 2012 at 9:32 AM, Hemant Gupta wrote: > This patch uses the corect packet type for ESCO Link. > Without this patch esco packet types were anded with ~EDR_ESCO_MASK > resulting in setting bits that are not supported by controller > to 0 which means that corresponding EDR ESCO packet type is > supported(EDR Packet types are inverted as per BT Spec) which might > not be the case. > > For eg: > Local Controller supports only 3-EV5, 2-EV5 and 3-EV3 of the EDR eSCO > packet types and does not support 2-EV3 packet type. This would mean > that while creating the esco_type in function > hci_cc_read_local_features() the ESCO_2EV3 bit would not be set and > all other EDR eSCO bits would be set resulting in > hdev->esco_type = 0x0380 > > Now in hci_conn_add() when the pkt_type is being calculated for eSCO > Link, wrong calculation would take place as below: > > conn->pkt_type = hdev->esco_type & ~EDR_ESCO_MASK; >                = 0x0380 & ~0x03C0 = 0x0380 & 0xFC3F >               = 0x0000 > Since the EDR eSCO bits are inverted, this would indicate that all > EDR eSCO packet types are supported, which is not correct as local > controller is not supporting the 2-EV3 packet type. > > As per calculations of the patch > conn->pkt_type = hdev->esco_type ^ EDR_ESCO_MASK; >                = 0x0380 ^ 0x03C0 >               = 0x0040 > which correctly indicates that packet type used excludes the 2-EV3 > packet type not supported by local controller. > > Signed-off-by: Hemant Gupta > Acked-by: Marcel Holtmann > --- >  net/bluetooth/hci_conn.c |    2 +- >  1 files changed, 1 insertions(+), 1 deletions(-) > > diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c > index 947172b..1060fb6 100644 > --- a/net/bluetooth/hci_conn.c > +++ b/net/bluetooth/hci_conn.c > @@ -396,7 +396,7 @@ struct hci_conn *hci_conn_add(struct hci_dev *hdev, int type, bdaddr_t *dst) >                        conn->pkt_type = hdev->pkt_type & SCO_PTYPE_MASK; >                break; >        case ESCO_LINK: > -               conn->pkt_type = hdev->esco_type & ~EDR_ESCO_MASK; > +               conn->pkt_type = hdev->esco_type ^ EDR_ESCO_MASK; >                break; >        } > > -- > 1.7.0.4 > Resending the patch with Marcel's ACK, because I am not sure if it made to the mailing list again or not. -- Best Regards Hemant Gupta ST-Ericsson India