From: "LOPEZ, FUENTES NACARINO Jairo Eduardo" <jairo@ruri.waseda.jp>
To: Andrii Anisov <andrii.anisov@gmail.com>
Cc: xen-devel@lists.xen.org
Subject: Re: RT Xen on ARM - R-Car series
Date: Sat, 12 Jan 2019 05:12:21 +0900 [thread overview]
Message-ID: <CACrvCsZuh+tj2ejA2RYh78QnySw0fBBEXxWpam_TcFZAORSCXw@mail.gmail.com> (raw)
In-Reply-To: <CACrvCsZH1-KCrPhfBYoji14KjXEk0hkdkRD4+1AKiXeJhTMNrA@mail.gmail.com>
[-- Attachment #1.1: Type: text/plain, Size: 20537 bytes --]
Andrii,
Due to some events on my side, I had to move from the R-Car H3 I was using
to the R-Car M3 in my posession.
I followed your initial advice and updated my environment to a newer
version, opting to stick to the rocko version for the m3ulcb.
The Yocto build configuration is shown below:
Build Configuration:
BB_VERSION = "1.36.0"
BUILD_SYS = "x86_64-linux"
NATIVELSBSTRING = "universal-4.9"
TARGET_SYS = "aarch64-poky-linux"
MACHINE = "m3ulcb"
DISTRO = "poky"
DISTRO_VERSION = "2.4.2"
TUNE_FEATURES = "aarch64 cortexa57-cortexa53"
TARGET_FPU = ""
SOC_FAMILY = "rcar-gen3:r8a7796"
meta
meta-poky
meta-yocto-bsp = "HEAD:342fbd6a3e57021c8e28b124b3adb241936f3d9d"
meta-rcar-gen3 = "rocko:8af0b7d6e445b532088a068dc012757001be3a1f"
meta-optee = "rocko:75dfb67bbb14a70cd47afda9726e2e1c76731885"
meta-oe
meta-python
meta-networking = "rocko:eae996301d9c097bcbeb8046f08041dc82bb62f8"
meta-selinux = "rocko:d855c624f32c5e599bf27e06cb8f5b25b3aae12d"
meta-virtualization = "rocko:b704c689b67639214b9568a3d62e82df27e9434f"
meta-rcar-gen3-xen = "master:60699c631d541aeeaebaeec9a087efed9385ee42"
I had to modify the dtb to the version shown below:
// SPDX-License-Identifier:
GPL-2.0
/*
* Device Tree Source for the M3ULCB (R-Car Starter Kit Pro)
board
*
* Copyright (C) 2016-2018 Renesas Electronics
Corp.
* Copyright (C) 2016 Cogent Embedded,
Inc.
*/
/dts-v1/;
#include
"r8a7796.dtsi"
#include
"ulcb.dtsi"
/
{
model = "Renesas M3ULCB board based on
r8a7796";
compatible = "renesas,m3ulcb",
"renesas,r8a7796";
cpus
{
idle-states
{
/delete-node/
cpu-sleep-1;
};
};
memory@48000000
{
device_type =
"memory";
/* first 128MB is reserved for secure area.
*/
reg = <0x0 0x48000000 0x0
0x38000000>;
};
memory@600000000 {
device_type = "memory";
reg = <0x6 0x00000000 0x0 0x40000000>;
};
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
/* device specific region for Lossy Decompression */
lossy_decompress: linux,lossy_decompress@54000000 {
no-map;
reg = <0x00000000 0x54000000 0x0 0x03000000>;
};
/* global autoconfigured region for contiguous allocations
*/
linux,cma@57000000 {
compatible = "shared-dma-pool";
reusable;
reg = <0x00000000 0x57000000 0x0 0x19000000>;
linux,cma-default;
};
/* device specific region for contiguous allocations */
mmp_reserved: linux,multimedia@70000000 {
compatible = "shared-dma-pool";
reusable;
reg = <0x00000000 0x70000000 0x0 0x10000000>;
};
};
chosen {
stdout-path = "serial0:115200n8";
xen,xen-bootargs = "dom0_mem=752M console=dtuart
dtuart=serial0 dom0_max_vcpus=4";
xen,dom0-bootargs = "console=hvc0 clk_ignore_unused
root=/dev/mmcblk1p2 rw rootwait ignore_loglevel cma=128M";
#address-cells = <2>;
#size-cells = <2>;
modules {
module@0 {
compatible = "xen,linux-zimage",
"xen,multiboot-module";
reg = <0x0 0x7a000000 0x0 0x02000000>;
};
};
};
mmngr {
compatible = "renesas,mmngr";
memory-region = <&mmp_reserved>, <&lossy_decompress>;
};
mmngrbuf {
compatible = "renesas,mmngrbuf";
};
vspm_if {
compatible = "renesas,vspm_if";
};
versaclock5_out3: versaclk-3 {
compatible = "fixed-clock";
#clock-cells = <0>;
/* Initial value of versaclock out3 */
clock-frequency = <33000000>;
};
};
&a53_0 {
/delete-property/ cpu-idle-states;
};
&a53_1 {
/delete-property/ cpu-idle-states;
};
&a53_2 {
/delete-property/ cpu-idle-states;
};
&a53_3 {
/delete-property/ cpu-idle-states;
};
&du {
clocks = <&cpg CPG_MOD 724>,
<&cpg CPG_MOD 723>,
<&cpg CPG_MOD 722>,
<&versaclock5 1>,
<&versaclock5_out3>,
<&versaclock5 2>;
clock-names = "du.0", "du.1", "du.2",
"dclkin.0", "dclkin.1", "dclkin.2";
};
&vspb {
status = "okay";
};
&vspi0 {
status = "okay";
};
With the new information, I finally got some output for Xen, but was met
with a completely different issue for which I can't find any information
for the error I am receiving.
I realize that I may have an issue with the version of the board I am
using, but a simple online search doesn't throw any red flags. The serial
console output is below:
[ 0.000177] NOTICE: BL2: R-Car M3 Initial Program Loader(CA57)
[ 0.004613] NOTICE: BL2: Initial Program Loader(Rev.2.0.0)
[ 0.010147] NOTICE: BL2: PRR is R-Car M3 Ver.1.0
[ 0.014815] NOTICE: BL2: Board is Starter Kit Rev.1.0
[ 0.019928] NOTICE: BL2: Boot device is HyperFlash(80MHz)
[ 0.025354] NOTICE: BL2: LCM state is CM
[ 0.029395] NOTICE: BL2: AVS setting succeeded. DVFS_SetVID=0x53
[ 0.035383] NOTICE: BL2: DDR3200(rev.0.34)
[ 0.046779] NOTICE: BL2: [COLD_BOOT]
[ 0.085117] NOTICE: BL2: DRAM Split is 2ch
[ 0.087812] NOTICE: BL2: QoS is default setting(rev.0.19)
[ 0.093315] NOTICE: BL2: Lossy Decomp areas
[ 0.097489] NOTICE: Entry 0: DCMPAREACRAx:0x80000540
DCMPAREACRBx:0x570
[ 0.104573] NOTICE: Entry 1: DCMPAREACRAx:0x40000000
DCMPAREACRBx:0x0
[ 0.111485] NOTICE: Entry 2: DCMPAREACRAx:0x20000000
DCMPAREACRBx:0x0
[ 0.118400] NOTICE: BL2: v1.5(release):556a11e
[ 0.122890] NOTICE: BL2: Built : 18:03:48, Jan 11 2019
[ 0.128077] NOTICE: BL2: Normal boot
[ 0.131718] NOTICE: BL2: dst=0xe6321100 src=0x8180000 len=512(0x200)
[ 0.138106] NOTICE: BL2: dst=0x43f00000 src=0x8180400 len=6144(0x1800)
[ 0.144726] NOTICE: BL2: dst=0x44000000 src=0x81c0000 len=65536(0x10000)
[ 0.151952] NOTICE: BL2: dst=0x44100000 src=0x8200000
len=1048576(0x100000)
[ 0.166777] NOTICE: BL2: dst=0x50000000 src=0x8640000
len=1048576(0x100000)
[ 0.180752] NOTICE: BL2: Booting BL31
U-Boot 2018.09 (Jan 12 2019 - 03:03:43 +0900)
CPU: Renesas Electronics R8A7796 rev 1.0
Model: Renesas M3ULCB board based on r8a7796
DRAM: 1.9 GiB
Bank #0: 0x048000000 - 0x07fffffff, 896 MiB
Bank #1: 0x600000000 - 0x63fffffff, 1 GiB
MMC: sd@ee100000: 0, sd@ee140000: 1
Loading Environment from MMC... communication out of sync
communication out of sync
communication out of sync
communication out of sync
communication out of sync
communication out of sync
communication out of sync
communication out of sync
communication out of sync
communication out of sync
communication out of sync
communication out of sync
OK
In: serial@e6e88000
Out: serial@e6e88000
Err: serial@e6e88000
Net: eth0: ethernet@e6800000
Hit any key to stop autoboot: 0
ethernet@e6800000 Waiting for PHY auto negotiation to complete... done
Using ethernet@e6800000 device
TFTP from server 192.168.1.100; our IP address is 192.168.1.3
Filename 'Image'.
Load address: 0x48080000
Loading: #################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
############################################
2.7 MiB/s
done
Bytes transferred = 15911424 (f2ca00 hex)
Using ethernet@e6800000 device
TFTP from server 192.168.1.100; our IP address is 192.168.1.3
Filename 'Image-r8a7796-m3ulcb.dtb'.
Load address: 0x48000000
Loading: *
TFTP error: 'File not found' (1)
Not retrying...
ERROR: Did not find a cmdline Flattened Device Tree
Could not find a valid device tree
=> setenv bootargs
=> tftp 0x48080000 xen-m3ulcb.uImage
Using ethernet@e6800000
device
TFTP from server 192.168.1.100; our IP address is
192.168.1.3
Filename
'xen-m3ulcb.uImage'.
Load address:
0x48080000
Loading:
###############################################################
28.3
MiB/s
done
Bytes transferred = 918928 (e0590
hex)
=> tftp 0x48000000
Image-r8a7796-m3ulcb-xen-local.dtb
Using ethernet@e6800000
device
TFTP from server 192.168.1.100; our IP address is
192.168.1.3
Filename
'Image-r8a7796-m3ulcb-xen-local.dtb'.
Load address:
0x48000000
Loading:
#####
21.8
MiB/s
done
Bytes transferred = 68545 (10bc1
hex)
=> tftp 0x7a000000
Image-m3ulcb.bin
Using ethernet@e6800000
device
TFTP from server 192.168.1.100; our IP address is 192.168.1.3
Filename 'Image-m3ulcb.bin'.
Load address: 0x7a000000
Loading: #################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
################################################################
28.1 MiB/s
done
Bytes transferred = 19059200 (122d200 hex)
=> bootm 0x48080000 - 0x48000000
## Booting kernel from Legacy Image at 48080000 ...
Image Name: XEN
Image Type: AArch64 Linux Kernel Image (uncompressed)
Data Size: 918864 Bytes = 897.3 KiB
Load Address: 78080000
Entry Point: 78080000
Verifying Checksum ... OK
## Flattened Device Tree blob at 48000000
Booting using the fdt blob at 0x48000000
Loading Kernel Image ... OK
Using Device Tree in place at 0000000048000000, end 0000000048013bc0
Starting kernel ...
Xen 4.12-unstable
(XEN) Xen version 4.12-unstable (jelfn@waseda.jp) (aarch64-poky-linux-gc9
(XEN) Latest ChangeSet: Mon Dec 17 09:22:59 2018 +0000 git:a5b0eb3-dirty
(XEN) Processor: 411fd073: "ARM Limited", variant: 0x1, part 0xd07, rev 0x3
(XEN) 64-bit Execution:
(XEN) Processor Features: 0000000000002222 0000000000000000
(XEN) Exception Levels: EL3:64+32 EL2:64+32 EL1:64+32 EL0:64+32
(XEN) Extensions: FloatingPoint AdvancedSIMD
(XEN) Debug Features: 0000000010305106 0000000000000000
(XEN) Auxiliary Features: 0000000000000000 0000000000000000
(XEN) Memory Model Features: 0000000000001124 0000000000000000
(XEN) ISA Features: 0000000000011120 0000000000000000
(XEN) 32-bit Execution:
(XEN) Processor Features: 00000131:00011011
(XEN) Instruction Sets: AArch32 A32 Thumb Thumb-2 Jazelle
(XEN) Extensions: GenericTimer Security
(XEN) Debug Features: 03010066
(XEN) Auxiliary Features: 00000000
(XEN) Memory Model Features: 10201105 40000000 01260000 02102211
(XEN) ISA Features: 02101110 13112111 21232042 01112131 00011142 00011121
(XEN) Using SMC Calling Convention v1.1
(XEN) Using PSCI v1.1
(XEN) SMP: Allowing 6 CPUs
(XEN)
(XEN) ****************************************
(XEN) Panic on CPU 0:
(XEN) Timer: Unable to retrieve IRQ 0 from the device tree
(XEN) ****************************************
(XEN)
(XEN) Reboot in five seconds...
Is there anything I have overlooked in the compilation or configuration for
Xen?
Thank you very much for all the help you have offered up to this point. I
am at least happy to get some output, even if it is on the R-Car M3 board
in my possession.
Best regards,
Jairo
2019年1月9日(水) 2:04 LOPEZ, FUENTES NACARINO Jairo Eduardo <
jairo@ruri.waseda.jp>:
> Andrii,
>
> I have attempted to update the bootloader from the srec files created by
> the bitbake command.
>
> I believe I have been able to update it, but I am still obtaining the same
> results. The serial output is shown below:
>
> [ 0.000161] NOTICE: BL2: R-Car Gen3 Initial Program Loader(CA57)
> Rev.1.0.17
> [ 0.005721] NOTICE: BL2: PRR is R-Car H3 Ver2.0
> [ 0.010304] NOTICE: BL2: Board is Starter Kit Rev1.0
> [ 0.015331] NOTICE: BL2: Boot device is HyperFlash(80MHz)
> [ 0.020757] NOTICE: BL2: LCM state is CM
> [ 0.024802] NOTICE: BL2: AVS setting succeeded. DVFS_SetVID=0x53
> [ 0.030786] NOTICE: BL2: DDR3200(rev.0.28)NOTICE: [COLD_BOOT]NOTICE:
> ..0
> [ 0.059996] NOTICE: BL2: DRAM Split is 4ch
> [ 0.063882] NOTICE: BL2: QoS is default setting(rev.0.18)
> [ 0.069381] NOTICE: BL2: Lossy Decomp areas
> [ 0.073559] NOTICE: Entry 0: DCMPAREACRAx:0x80000540
> DCMPAREACRBx:0x570
> [ 0.080643] NOTICE: Entry 1: DCMPAREACRAx:0x40000000
> DCMPAREACRBx:0x0
> [ 0.087555] NOTICE: Entry 2: DCMPAREACRAx:0x20000000
> DCMPAREACRBx:0x0
> [ 0.094470] NOTICE: BL2: v1.3(release):b15fefa
> [ 0.098960] NOTICE: BL2: Built : 12:21:32, Dec 28 2018
> [ 0.104147] NOTICE: BL2: Normal boot
> [ 0.107788] NOTICE: BL2: dst=0xe6322210 src=0x8180000 len=512(0x200)
> [ 0.114335] NOTICE: BL2: dst=0x43f00000 src=0x8180400 len=6144(0x1800)
> [ 0.120797] NOTICE: BL2: dst=0x44000000 src=0x81c0000
> len=65536(0x10000)
> [ 0.128022] NOTICE: BL2: dst=0x44100000 src=0x8200000
> len=524288(0x80000)
> [ 0.138503] NOTICE: BL2: dst=0x50000000 src=0x8640000
> len=1048576(0x100000)
>
>
> U-Boot 2015.04 (Dec 28 2018 - 02:46:24)
>
> CPU: Renesas Electronics R8A7795 rev 2.0
> Board: H3ULCB
> I2C: ready
> DRAM: 3.9 GiB
> MMC: sh-sdhi: 0, sh-sdhi: 1
> In: serial
> Out: serial
> Err: serial
> Net: ravb
> Hit any key to stop autoboot: 0
> => setenv bootargs
> => setenv serverip 192.168.1.100
> => tftp 0x48080000 xen-h3ulcb.uImage
> ravb Waiting for PHY auto negotiation to complete......... TIMEOUT !
> Half
> Using ravb device
> TFTP from server 192.168.1.100; our IP address is 192.168.1.40
> Filename 'xen-h3ulcb.uImage'.
> Load address: 0x48080000
> Loading: *
> ARP Retry count exceeded; starting again
> ravb:0 is connected to ravb. Reconnecting to ravb
> ravb Waiting for PHY auto negotiation to complete......... TIMEOUT !
> Half
>
> ARP Retry count exceeded; starting again
> ravb:0 is connected to ravb. Reconnecting to ravb
> ravb Waiting for PHY auto negotiation to complete... done
> ravb: 1000Base/Full
> Using ravb device
> TFTP from server 192.168.1.100; our IP address is 192.168.1.40
> Filename 'xen-h3ulcb.uImage'.
> Load address: 0x48080000
> Loading: ###########################################################
> 25.4 MiB/s
> done
> Bytes transferred = 852368 (d0190 hex)
> => tftp 0x48000000 Image-r8a7795-h3ulcb-xen-local.dtb
> ravb:0 is connected to ravb. Reconnecting to ravb
> ravb Waiting for PHY auto negotiation to complete..... done
> ravb: 1000Base/Full
> Using ravb device
> TFTP from server 192.168.1.100; our IP address is 192.168.1.40
> Filename 'Image-r8a7795-h3ulcb-xen-local.dtb'.
> Load address: 0x48000000
> Loading: #####
> 11.7 KiB/s
> done
> Bytes transferred = 63778 (f922 hex)
> => tftp 0x7a000000 h3ulcb-image
> ravb:0 is connected to ravb. Reconnecting to ravb
> ravb Waiting for PHY auto negotiation to complete... done
> ravb: 1000Base/Full
> Using ravb device
> TFTP from server 192.168.1.100; our IP address is 192.168.1.40
> Filename 'h3ulcb-image'.
> Load address: 0x7a000000
> Loading: #################################################################
> #################################################################
> #################################################################
> #################################################################
> #################################################################
> #################################################################
> #################################################################
> #################################################################
> #################################################################
> #################################################################
> #################################################################
> #################################################################
> #################################################################
> #################################################################
> #################################################################
> #################################################################
> ########################################
> 2.1 MiB/s
> done
> Bytes transferred = 15843840 (f1c200 hex)
> => bootm 0x48080000 - 0x48000000
> ## Booting kernel from Legacy Image at 48080000 ...
> Image Name: XEN
> Image Type: AArch64 Linux Kernel Image (uncompressed)
> Data Size: 852304 Bytes = 832.3 KiB
> Load Address: 78080000
> Entry Point: 78080000
> Verifying Checksum ... OK
> ## Flattened Device Tree blob at 48000000
> Booting using the fdt blob at 0x48000000
> Loading Kernel Image ... OK
> Using Device Tree in place at 0000000048000000, end 0000000048012921
>
> Starting kernel ...
>
> </end output>
>
> I have noticed that the uboot date has not changed from 2015.04 although
> the build date is from the last time I ran a bitbake command.
>
> I do not know what version of uboot should be used without breaking the
> current compiling versions.
>
> Are there any other modifications that I can attempt?
>
> Thank you very much for your time and patience.
>
> Best regards,
>
> Jairo
>
>
>
>
[-- Attachment #1.2: Type: text/html, Size: 29798 bytes --]
[-- Attachment #2: Type: text/plain, Size: 157 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel
next prev parent reply other threads:[~2019-01-11 20:12 UTC|newest]
Thread overview: 79+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CACrvCsaeHuwzZzUQTzNYF7fqmgQWNJUVOQZv9D0MnYrXjqzZtQ@mail.gmail.com>
2018-12-22 12:21 ` RT Xen on ARM - R-Car series Andrii Anisov
2018-12-25 16:07 ` LOPEZ, FUENTES NACARINO Jairo Eduardo
2018-12-27 11:07 ` Andrii Anisov
2018-12-28 15:22 ` LOPEZ, FUENTES NACARINO Jairo Eduardo
2018-12-28 8:28 ` Andrii Anisov
2018-12-28 8:32 ` Andrii Anisov
2018-12-28 8:39 ` Andrii Anisov
2019-01-04 9:09 ` LOPEZ, FUENTES NACARINO Jairo Eduardo
2019-01-08 17:04 ` LOPEZ, FUENTES NACARINO Jairo Eduardo
2019-01-11 20:12 ` LOPEZ, FUENTES NACARINO Jairo Eduardo [this message]
2019-01-14 8:42 ` Andrii Anisov
2019-01-16 7:53 ` Andrii Anisov
2019-01-21 18:04 ` LOPEZ, FUENTES NACARINO Jairo Eduardo
[not found] ` <CACrvCsZB-tps6=Vr=1Phf5oo5eUReabMLJzkbO3d2hmNLDOxww@mail.gmail.com>
[not found] ` <7e217489-2c1a-c35f-d51f-0969654aa8cc@gmail.com>
[not found] ` <CACrvCsaYJ-zGkZwfdV7BXDABW8u_EDQetU3pq+2otRGXWTXagw@mail.gmail.com>
[not found] ` <4d078801-b804-06e7-ad5c-8032b1dbaa84@gmail.com>
2019-01-28 17:20 ` LOPEZ, FUENTES NACARINO Jairo Eduardo
2019-01-28 8:25 ` Andrii Anisov
2019-01-29 15:30 ` LOPEZ, FUENTES NACARINO Jairo Eduardo
2019-01-29 13:29 ` Andrii Anisov
2019-01-30 20:23 ` LOPEZ, FUENTES NACARINO Jairo Eduardo
2019-01-30 12:12 ` Julien Grall
2019-01-31 11:22 ` Andrii Anisov
2019-01-31 11:37 ` Julien Grall
2019-01-31 12:00 ` Andrii Anisov
2019-01-31 12:20 ` Julien Grall
2019-01-31 21:56 ` Stefano Stabellini
2019-01-31 23:14 ` Julien Grall
2019-02-01 10:02 ` Andrii Anisov
2019-02-01 10:12 ` Julien Grall
2019-02-01 10:35 ` Andrii Anisov
2019-02-01 11:06 ` Julien Grall
2019-02-01 16:53 ` Roger Pau Monné
2019-02-01 17:40 ` Julien Grall
2019-02-04 10:28 ` Andrii Anisov
2019-02-04 11:21 ` Julien Grall
2019-02-04 14:46 ` Andrii Anisov
2019-02-04 15:05 ` Julien Grall
2019-02-04 12:53 ` Roger Pau Monné
2019-02-04 21:58 ` Julien Grall
2019-02-05 8:40 ` Andrii Anisov
2019-02-05 9:45 ` Roger Pau Monné
2019-02-05 9:54 ` Andrii Anisov
2019-02-05 10:10 ` Roger Pau Monné
2019-02-06 20:20 ` Andrii Anisov
2019-02-06 21:03 ` Stefano Stabellini
2019-02-07 9:42 ` Andrii Anisov
2019-02-07 10:35 ` Roger Pau Monné
2019-02-07 10:59 ` Julien Grall
2019-02-12 18:21 ` Andrii Anisov
2019-02-12 19:21 ` Julien Grall
2019-02-14 14:18 ` Andrii Anisov
2019-02-14 17:29 ` Julien Grall
2019-02-15 11:30 ` Andrii Anisov
2019-02-15 17:13 ` Julien Grall
2019-02-15 17:41 ` Andrii Anisov
2019-02-16 8:42 ` Julien Grall
2019-02-12 18:21 ` Andrii Anisov
2019-02-14 16:29 ` Roger Pau Monné
2019-02-15 15:21 ` Andrii Anisov
2019-02-15 16:31 ` Julien Grall
2019-02-15 17:30 ` Andrii Anisov
2019-02-15 18:36 ` Julien Grall
2019-02-14 17:08 ` Julien Grall
2019-02-05 9:26 ` Roger Pau Monné
2019-02-01 10:07 ` Andrii Anisov
2019-02-01 10:16 ` Julien Grall
2019-02-01 10:35 ` Andrii Anisov
2019-02-01 10:51 ` Julien Grall
2019-02-01 18:00 ` Stefano Stabellini
2019-02-04 10:32 ` Andrii Anisov
2019-02-04 11:36 ` Julien Grall
2019-02-04 15:19 ` Andrii Anisov
2019-02-04 22:06 ` Julien Grall
2019-02-05 9:01 ` Andrii Anisov
2019-02-05 19:18 ` Stefano Stabellini
2019-02-07 10:53 ` Andrii Anisov
[not found] ` <CACrvCsbkFG=3To83qi7xxmtmgC_9PKvuLz73edhiaV7TsJAZqQ@mail.gmail.com>
2019-01-31 12:24 ` Julien Grall
2019-01-16 20:46 ` Andrii Anisov
2019-01-16 7:40 ` Andrii Anisov
2019-01-17 2:08 ` LOPEZ, FUENTES NACARINO Jairo Eduardo
2018-12-28 17:35 ` LOPEZ, FUENTES NACARINO Jairo Eduardo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CACrvCsZuh+tj2ejA2RYh78QnySw0fBBEXxWpam_TcFZAORSCXw@mail.gmail.com \
--to=jairo@ruri.waseda.jp \
--cc=andrii.anisov@gmail.com \
--cc=xen-devel@lists.xen.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.