On Fri, Nov 27, 2020 at 2:13 AM Krzysztof Kozlowski wrote: > > On Fri, Nov 27, 2020 at 12:33:39AM +0900, bongsu.jeon2@gmail.com wrote: > > From: Bongsu Jeon > > > > Extract the common phy blocks to reuse it. > > The UART module will use the common blocks. > > > Hi, > > Thanks for the patch. Few comments below. > > > Signed-off-by: Bongsu Jeon > > --- > > drivers/nfc/s3fwrn5/i2c.c | 111 ++++++++++++--------------------------- > > drivers/nfc/s3fwrn5/phy_common.h | 86 ++++++++++++++++++++++++++++++ > > 2 files changed, 119 insertions(+), 78 deletions(-) > > create mode 100644 drivers/nfc/s3fwrn5/phy_common.h > > > > diff --git a/drivers/nfc/s3fwrn5/i2c.c b/drivers/nfc/s3fwrn5/i2c.c > > index 9a64eea..cd1b2a7 100644 > > --- a/drivers/nfc/s3fwrn5/i2c.c > > +++ b/drivers/nfc/s3fwrn5/i2c.c > > @@ -15,75 +15,30 @@ > > > > #include > > > > -#include "s3fwrn5.h" > > +#include "phy_common.h" > > > > #define S3FWRN5_I2C_DRIVER_NAME "s3fwrn5_i2c" > > > > -#define S3FWRN5_EN_WAIT_TIME 20 > > - > > struct s3fwrn5_i2c_phy { > > + struct phy_common common; > > struct i2c_client *i2c_dev; > > - struct nci_dev *ndev; > > - > > - int gpio_en; > > - int gpio_fw_wake; > > - > > - struct mutex mutex; > > > > - enum s3fwrn5_mode mode; > > unsigned int irq_skip:1; > > }; > > > > -static void s3fwrn5_i2c_set_wake(void *phy_id, bool wake) > > -{ > > - struct s3fwrn5_i2c_phy *phy = phy_id; > > - > > - mutex_lock(&phy->mutex); > > - gpio_set_value(phy->gpio_fw_wake, wake); > > - msleep(S3FWRN5_EN_WAIT_TIME); > > - mutex_unlock(&phy->mutex); > > -} > > - > > static void s3fwrn5_i2c_set_mode(void *phy_id, enum s3fwrn5_mode mode) > > { > > struct s3fwrn5_i2c_phy *phy = phy_id; > > > > - mutex_lock(&phy->mutex); > > + mutex_lock(&phy->common.mutex); > > > > - if (phy->mode == mode) > > + if (s3fwrn5_phy_power_ctrl(&phy->common, mode) == false) > > goto out; > > > > - phy->mode = mode; > > - > > - gpio_set_value(phy->gpio_en, 1); > > - gpio_set_value(phy->gpio_fw_wake, 0); > > - if (mode == S3FWRN5_MODE_FW) > > - gpio_set_value(phy->gpio_fw_wake, 1); > > - > > - if (mode != S3FWRN5_MODE_COLD) { > > - msleep(S3FWRN5_EN_WAIT_TIME); > > - gpio_set_value(phy->gpio_en, 0); > > - msleep(S3FWRN5_EN_WAIT_TIME); > > - } > > - > > phy->irq_skip = true; > > > > out: > > - mutex_unlock(&phy->mutex); > > -} > > - > > -static enum s3fwrn5_mode s3fwrn5_i2c_get_mode(void *phy_id) > > -{ > > - struct s3fwrn5_i2c_phy *phy = phy_id; > > - enum s3fwrn5_mode mode; > > - > > - mutex_lock(&phy->mutex); > > - > > - mode = phy->mode; > > - > > - mutex_unlock(&phy->mutex); > > - > > - return mode; > > + mutex_unlock(&phy->common.mutex); > > } > > > > static int s3fwrn5_i2c_write(void *phy_id, struct sk_buff *skb) > > @@ -91,7 +46,7 @@ static int s3fwrn5_i2c_write(void *phy_id, struct sk_buff *skb) > > struct s3fwrn5_i2c_phy *phy = phy_id; > > int ret; > > > > - mutex_lock(&phy->mutex); > > + mutex_lock(&phy->common.mutex); > > > > phy->irq_skip = false; > > > > @@ -102,7 +57,7 @@ static int s3fwrn5_i2c_write(void *phy_id, struct sk_buff *skb) > > ret = i2c_master_send(phy->i2c_dev, skb->data, skb->len); > > } > > > > - mutex_unlock(&phy->mutex); > > + mutex_unlock(&phy->common.mutex); > > > > if (ret < 0) > > return ret; > > @@ -114,9 +69,9 @@ static int s3fwrn5_i2c_write(void *phy_id, struct sk_buff *skb) > > } > > > > static const struct s3fwrn5_phy_ops i2c_phy_ops = { > > - .set_wake = s3fwrn5_i2c_set_wake, > > + .set_wake = s3fwrn5_phy_set_wake, > > .set_mode = s3fwrn5_i2c_set_mode, > > - .get_mode = s3fwrn5_i2c_get_mode, > > + .get_mode = s3fwrn5_phy_get_mode, > > .write = s3fwrn5_i2c_write, > > }; > > > > @@ -128,7 +83,7 @@ static int s3fwrn5_i2c_read(struct s3fwrn5_i2c_phy *phy) > > char hdr[4]; > > int ret; > > > > - hdr_size = (phy->mode == S3FWRN5_MODE_NCI) ? > > + hdr_size = (phy->common.mode == S3FWRN5_MODE_NCI) ? > > NCI_CTRL_HDR_SIZE : S3FWRN5_FW_HDR_SIZE; > > ret = i2c_master_recv(phy->i2c_dev, hdr, hdr_size); > > if (ret < 0) > > @@ -137,7 +92,7 @@ static int s3fwrn5_i2c_read(struct s3fwrn5_i2c_phy *phy) > > if (ret < hdr_size) > > return -EBADMSG; > > > > - data_len = (phy->mode == S3FWRN5_MODE_NCI) ? > > + data_len = (phy->common.mode == S3FWRN5_MODE_NCI) ? > > ((struct nci_ctrl_hdr *)hdr)->plen : > > ((struct s3fwrn5_fw_header *)hdr)->len; > > > > @@ -157,24 +112,24 @@ static int s3fwrn5_i2c_read(struct s3fwrn5_i2c_phy *phy) > > } > > > > out: > > - return s3fwrn5_recv_frame(phy->ndev, skb, phy->mode); > > + return s3fwrn5_recv_frame(phy->common.ndev, skb, phy->common.mode); > > } > > > > static irqreturn_t s3fwrn5_i2c_irq_thread_fn(int irq, void *phy_id) > > { > > struct s3fwrn5_i2c_phy *phy = phy_id; > > > > - if (!phy || !phy->ndev) { > > + if (!phy || !phy->common.ndev) { > > WARN_ON_ONCE(1); > > return IRQ_NONE; > > } > > > > - mutex_lock(&phy->mutex); > > + mutex_lock(&phy->common.mutex); > > > > if (phy->irq_skip) > > goto out; > > > > - switch (phy->mode) { > > + switch (phy->common.mode) { > > case S3FWRN5_MODE_NCI: > > case S3FWRN5_MODE_FW: > > s3fwrn5_i2c_read(phy); > > @@ -184,7 +139,7 @@ static irqreturn_t s3fwrn5_i2c_irq_thread_fn(int irq, void *phy_id) > > } > > > > out: > > - mutex_unlock(&phy->mutex); > > + mutex_unlock(&phy->common.mutex); > > > > return IRQ_HANDLED; > > } > > @@ -197,19 +152,19 @@ static int s3fwrn5_i2c_parse_dt(struct i2c_client *client) > > if (!np) > > return -ENODEV; > > > > - phy->gpio_en = of_get_named_gpio(np, "en-gpios", 0); > > - if (!gpio_is_valid(phy->gpio_en)) { > > + phy->common.gpio_en = of_get_named_gpio(np, "en-gpios", 0); > > + if (!gpio_is_valid(phy->common.gpio_en)) { > > /* Support also deprecated property */ > > - phy->gpio_en = of_get_named_gpio(np, "s3fwrn5,en-gpios", 0); > > - if (!gpio_is_valid(phy->gpio_en)) > > + phy->common.gpio_en = of_get_named_gpio(np, "s3fwrn5,en-gpios", 0); > > + if (!gpio_is_valid(phy->common.gpio_en)) > > return -ENODEV; > > } > > > > - phy->gpio_fw_wake = of_get_named_gpio(np, "wake-gpios", 0); > > - if (!gpio_is_valid(phy->gpio_fw_wake)) { > > + phy->common.gpio_fw_wake = of_get_named_gpio(np, "wake-gpios", 0); > > + if (!gpio_is_valid(phy->common.gpio_fw_wake)) { > > /* Support also deprecated property */ > > - phy->gpio_fw_wake = of_get_named_gpio(np, "s3fwrn5,fw-gpios", 0); > > - if (!gpio_is_valid(phy->gpio_fw_wake)) > > + phy->common.gpio_fw_wake = of_get_named_gpio(np, "s3fwrn5,fw-gpios", 0); > > The lines here should wrap at 80 character. > > > + if (!gpio_is_valid(phy->common.gpio_fw_wake)) > > return -ENODEV; > > } > > > > @@ -226,8 +181,8 @@ static int s3fwrn5_i2c_probe(struct i2c_client *client, > > if (!phy) > > return -ENOMEM; > > > > - mutex_init(&phy->mutex); > > - phy->mode = S3FWRN5_MODE_COLD; > > + mutex_init(&phy->common.mutex); > > + phy->common.mode = S3FWRN5_MODE_COLD; > > phy->irq_skip = true; > > > > phy->i2c_dev = client; > > @@ -237,17 +192,17 @@ static int s3fwrn5_i2c_probe(struct i2c_client *client, > > if (ret < 0) > > return ret; > > > > - ret = devm_gpio_request_one(&phy->i2c_dev->dev, phy->gpio_en, > > - GPIOF_OUT_INIT_HIGH, "s3fwrn5_en"); > > + ret = devm_gpio_request_one(&phy->i2c_dev->dev, phy->common.gpio_en, > > + GPIOF_OUT_INIT_HIGH, "s3fwrn5_en"); > > if (ret < 0) > > return ret; > > > > - ret = devm_gpio_request_one(&phy->i2c_dev->dev, phy->gpio_fw_wake, > > - GPIOF_OUT_INIT_LOW, "s3fwrn5_fw_wake"); > > + ret = devm_gpio_request_one(&phy->i2c_dev->dev, phy->common.gpio_fw_wake, > > + GPIOF_OUT_INIT_LOW, "s3fwrn5_fw_wake"); > > if (ret < 0) > > return ret; > > > > - ret = s3fwrn5_probe(&phy->ndev, phy, &phy->i2c_dev->dev, &i2c_phy_ops); > > + ret = s3fwrn5_probe(&phy->common.ndev, phy, &phy->i2c_dev->dev, &i2c_phy_ops); > > Please wrap the lines. > > > if (ret < 0) > > return ret; > > > > @@ -255,7 +210,7 @@ static int s3fwrn5_i2c_probe(struct i2c_client *client, > > s3fwrn5_i2c_irq_thread_fn, IRQF_TRIGGER_HIGH | IRQF_ONESHOT, > > S3FWRN5_I2C_DRIVER_NAME, phy); > > if (ret) > > - s3fwrn5_remove(phy->ndev); > > + s3fwrn5_remove(phy->common.ndev); > > > > return ret; > > } > > @@ -264,7 +219,7 @@ static int s3fwrn5_i2c_remove(struct i2c_client *client) > > { > > struct s3fwrn5_i2c_phy *phy = i2c_get_clientdata(client); > > > > - s3fwrn5_remove(phy->ndev); > > + s3fwrn5_remove(phy->common.ndev); > > > > return 0; > > } > > diff --git a/drivers/nfc/s3fwrn5/phy_common.h b/drivers/nfc/s3fwrn5/phy_common.h > > new file mode 100644 > > index 0000000..14f7690 > > --- /dev/null > > +++ b/drivers/nfc/s3fwrn5/phy_common.h > > @@ -0,0 +1,86 @@ > > +/* SPDX-License-Identifier: GPL-2.0-or-later > > + * > > + * Link Layer for Samsung S3FWRN5 NCI based Driver > > + * > > + * Copyright (C) 2015 Samsung Electrnoics > > + * Robert Baldyga > > + * Copyright (C) 2020 Samsung Electrnoics > > + * Bongsu Jeon > > + */ > > + > > +#ifndef __LOCAL_PHY_COMMON_H > > +#define __LOCAL_PHY_COMMON_H > > Header guard: __NFC_S3FWRN5_PHY_COMMON_H > > > + > > +#include "s3fwrn5.h" > > This include should not be needed. > Actually, I included this because of enum s3fwrn5_mode. Do you think the following structure is good? 0. remove the '#include "s3fwrn5.h" and the common function's definition in phy_common.h. 1. make phy_common.c that includes the common function's definition and "s3fwrn5.h , phy_common.h". 2. i2c.c includes "s3fwrn5.h , phy_common.h". > > + > > +#define S3FWRN5_EN_WAIT_TIME 20 > > + > > +struct phy_common { > > + struct nci_dev *ndev; > > + > > + int gpio_en; > > + int gpio_fw_wake; > > + > > + struct mutex mutex; > > + > > + enum s3fwrn5_mode mode; > > +}; > > + > > +static inline void s3fwrn5_phy_set_wake(void *phy_id, bool wake) > > +{ > > All these should go to a C source file. If needed - GPL exported. > > > + struct phy_common *phy = phy_id; > > + > > + mutex_lock(&phy->mutex); > > + gpio_set_value(phy->gpio_fw_wake, wake); > > + msleep(S3FWRN5_EN_WAIT_TIME); > > + mutex_unlock(&phy->mutex); > > +} > > + > > +static inline bool s3fwrn5_phy_power_ctrl(struct phy_common *phy, > > + enum s3fwrn5_mode mode) > > +{ > > + if (phy->mode == mode) > > + return false; > > + > > + phy->mode = mode; > > + > > + gpio_set_value(phy->gpio_en, 1); > > + gpio_set_value(phy->gpio_fw_wake, 0); > > + if (mode == S3FWRN5_MODE_FW) > > + gpio_set_value(phy->gpio_fw_wake, 1); > > + > > + if (mode != S3FWRN5_MODE_COLD) { > > + msleep(S3FWRN5_EN_WAIT_TIME); > > + gpio_set_value(phy->gpio_en, 0); > > + msleep(S3FWRN5_EN_WAIT_TIME); > > + } > > + > > + return true; > > +} > > + > > +static inline void s3fwrn5_phy_set_mode(void *phy_id, enum s3fwrn5_mode mode) > > +{ > > This looks unused. If you need it only for your next chip, add it with > next patch (the patch adding the user). > Okay I understand it. > Best regards, > Krzysztof