Re: Query regarding using the Redfish in OpenBMC

From: khader basha shaik <shaikkhaderbasha601@gmail.com>
To: Joseph Reynolds <jrey@linux.ibm.com>
Cc: "openbmc@lists.ozlabs.org" <openbmc@lists.ozlabs.org>,
	 "openbmcbump-github@yahoo.com" <openbmcbump-github@yahoo.com>
Subject: Re: Query regarding using the Redfish in OpenBMC
Date: Fri, 24 Jul 2020 17:29:26 +0530	[thread overview]
Message-ID: <CAD+gp9D5RRCy=onUg-PdzD91eCom--4y9QvPjjFiFLRSvTf0jw@mail.gmail.com> (raw)
In-Reply-To: <fb32bf4e-d6d8-15a2-14d8-3d3be3be3276@linux.ibm.com>

[-- Attachment #1: Type: text/plain, Size: 2174 bytes --]

Hi Joseph,

Thanks for your response.

I will be using Raspberrypi3 system.

Can you please guide what further steps I should take in order to view the
/redfish/v1 content in the web(https://xxx.xxx.xxx:8000/redfish/v1).

Any pointer on this is really helpful.

I have gone through the documents the developer docs but could not find
anything that points to enabling the redfish stuff in the browser.
Please correct me if i am wrong

Thanks & Regards,
Khader B Shaik

On Thu, 23 Jul 2020 at 19:25, Joseph Reynolds <jrey@linux.ibm.com> wrote:

> On 7/23/20 5:48 AM, khader basha shaik wrote:
> > Hi Team,
> >
> > I am newbiee to  Openbmc.  I want to view  the redfish/v1
> > (https://10.xxx.xxx.xxx:8000/redfish/v1) contents in the browser
> > .Could you please guide me on what changes i need to so that i view
> > the /redfish/v1/ content in the browser .
> >
> > here are the steps i have followed:
> >
> >  1. Clone OpenBMC project : git clone
> >     https://github.com/openbmc/openbmc.git in the server machine .
> >  2. Compile using the following command:
> >     TEMPLATECONF=meta-phosphor/conf  . openbmc-env
> >  3. modify the following files:
> >
> >   *  #build vi conf/local.conf  (modify the  line "-MACHINE??=qemuarm"
> >     " to "-MACHINE??=raspberrypi3-64" "
> >   * #build vi conf/bblayer.conf (add the following line
> >     "/home/khader<username>/openbmc/meta-raspberrypi \"  to the line
> >     above /home/khader<username>/openbmc/metaphosphor \"
> >
> >        4. #build  bitbake obmc-phosphor-image
> >
> > The above steps I have used to build an Openbmc project.
> >
> >
> > Can you help me what further steps should i need to do so that i can
> > view the /redfish/v1/  content in the webbrowser.
>
> What BMC system will you use to upload, boot, and run the BMC firmware
> image?  A QEMU virtual system?
> Have you seen the developer docs here?
> https://github.com/openbmc/docs/tree/master/development
>
> Good luck,
> - Joseph
>
> >
> > Note:- I am compiling the openbmc code in the server machine.
> >
> > Any help /guidelines on this will really help me alot.
> > Appreciate all your help.
> >
> > Thanks & Regards,
> > khader B Shaik
>
>

[-- Attachment #2: Type: text/html, Size: 3340 bytes --]