From mboxrd@z Thu Jan 1 00:00:00 1970 From: Vikas Sajjan Subject: Re: [PATCH v5 5/5] ARM: exynos: dts: Add FIMD DT binding Documentation Date: Thu, 28 Feb 2013 12:07:38 +0530 Message-ID: References: <1361954620-20614-1-git-send-email-vikas.sajjan@linaro.org> <1361954620-20614-6-git-send-email-vikas.sajjan@linaro.org> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Return-path: In-Reply-To: Sender: linux-samsung-soc-owner@vger.kernel.org To: Sachin Kamat Cc: linux-samsung-soc@vger.kernel.org, kgene.kim@samsung.com, inki.dae@samsung.com, t.figa@samsung.com, sylvester.nawrocki@gmail.com, devicetree-discuss@lists.ozlabs.org, joshi@samsung.com List-Id: devicetree@vger.kernel.org Hi Sachin, On 28 February 2013 11:42, Sachin Kamat wrote: > Hi Vikas, > > On 27 February 2013 14:13, Vikas Sajjan wrote: >> Adds FIMD DT binding documentation both SoC and Board, with an example >> >> Signed-off-by: Vikas Sajjan >> --- >> .../devicetree/bindings/video/exynos-fimd.txt | 46 ++++++++++++++++++++ >> 1 file changed, 46 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/video/exynos-fimd.txt >> >> diff --git a/Documentation/devicetree/bindings/video/exynos-fimd.txt b/Documentation/devicetree/bindings/video/exynos-fimd.txt >> new file mode 100644 >> index 0000000..b3542b9 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/video/exynos-fimd.txt >> @@ -0,0 +1,46 @@ >> +Device-Tree bindings for Exynos SoC display controller (FIMD) >> + >> +FIMD stands for Fully Interactive Mobile Display, is the Display Controller for >> +the Exynos series of SoCs which transfers the image data from a video buffer > > I think this should be Samsung series of SoCs intead of Exynos series. > As such the file name could be samsung-fimd.txt. Right. > >> +located in the system memory to an external LCD interface. >> + >> +Required properties: >> +- compatible := value can be one these below > > "value should be one of the following:" Ok. > > >> + "samsung,s3c2443-fimd"; /* for S3C24XX SoCs */ >> + "samsung,s3c6400-fimd"; /* for S3C64XX SoCs */ >> + "samsung,s5p6440-fimd"; /* for S5P64X0 SoCs */ >> + "samsung,s5pc100-fimd"; /* for S5PC100 SoC */ >> + "samsung,s5pv210-fimd"; /* for S5PV210 SoC */ >> + "samsung,exynos4210-fimd"; /* for Exynos4 SoCs */ >> + "samsung,exynos5250-fimd"; /* for Exynos5 SoCs */ > > blank line here would make it more readable? > >> +- reg := physical base address of the fimd and length of memory mapped region >> +- interrupt-parent := reference to the interrupt combiner node with phandle >> +- interrupts := interrupt number from the combiner to the cpu >> + we have 3 interrupts and the Interrupt combiner order is >> + FIFO Level, VSYNC and LCD_SYSTEM. Make sure to mention order >> + as VSYNC, FIFO Level and LCD_SYSTEM as show in the example below. > > Please rephrase the above as there seems to be difference in order in > the above 2 lines itself. :) what it means is the Interrupt combiner order is : FIFO Level, VSYNC and LCD_SYSTEM but since we use only the VSYNC interrupt and in the driver while getting IRQ number we pass 0 as index, hence the documentation says Make sure to mention order as VSYNC, FIFO Level and LCD_SYSTEM, as show in the example below interrupts = <11 1>, <11 0>, <11 2>; > > > -- > With warm regards, > Sachin -- Thanks and Regards Vikas Sajjan