From mboxrd@z Thu Jan  1 00:00:00 1970
From: Jagan Teki <jagannadh.teki@gmail.com>
Date: Wed, 30 Aug 2017 12:17:45 +0530
Subject: [U-Boot] [PATCH 3/4] sunxi: dts: added emac node for nanopi m1
In-Reply-To: <1504053161-27814-4-git-send-email-embed3d@gmail.com>
References: <1504053161-27814-1-git-send-email-embed3d@gmail.com>
 <1504053161-27814-4-git-send-email-embed3d@gmail.com>
Message-ID: <CAD6G_RQJDN+D_LQ3-8WHvDfc7-VSKvZc2Nc6v1iuObe5x1+UTg@mail.gmail.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On Wed, Aug 30, 2017 at 6:02 AM, Philipp Rossak <embed3d@gmail.com> wrote:
> From: Philipp Rossak <embed3d@gmail.com>
>
> The sun8i emac hardware is present on the Nanopi M1.
> It uses the internal PHY.
>
> Signed-off-by: Philipp Rossak <embed3d@gmail.com>
> ---
>  arch/arm/dts/sun8i-h3-nanopi-m1.dts | 11 +++++++++++
>  1 file changed, 11 insertions(+)
>
> diff --git a/arch/arm/dts/sun8i-h3-nanopi-m1.dts b/arch/arm/dts/sun8i-h3-nanopi-m1.dts
> index ec63d10..9c1c380 100644
> --- a/arch/arm/dts/sun8i-h3-nanopi-m1.dts
> +++ b/arch/arm/dts/sun8i-h3-nanopi-m1.dts
> @@ -55,6 +55,17 @@
>         status = "okay";
>  };
>
> +&emac {
> +       phy = <&phy1>;
> +       phy-mode = "mii";
> +       allwinner,use-internal-phy;
> +       allwinner,leds-active-low;
> +       status = "okay";
> +       phy1: ethernet-phy at 1 {
> +               reg = <1>;
> +       };
> +};

We usually sync Linux for dts changes and I've seen few patches on
Linux, lets wait Linux to merge.

thanks!
-- 
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.