From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jagan Teki Date: Wed, 30 Aug 2017 19:48:21 +0530 Subject: [U-Boot] [PATCH 3/4] sunxi: dts: added emac node for nanopi m1 In-Reply-To: <422ebcc8-7add-9923-4a78-41ba305c6039@gmail.com> References: <1504053161-27814-1-git-send-email-embed3d@gmail.com> <1504053161-27814-4-git-send-email-embed3d@gmail.com> <422ebcc8-7add-9923-4a78-41ba305c6039@gmail.com> Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Wed, Aug 30, 2017 at 2:40 PM, Philipp Rossak wrote: > > > Am 30.08.2017 um 08:47 schrieb Jagan Teki: >> >> On Wed, Aug 30, 2017 at 6:02 AM, Philipp Rossak wrote: >>> >>> From: Philipp Rossak >>> >>> The sun8i emac hardware is present on the Nanopi M1. >>> It uses the internal PHY. >>> >>> Signed-off-by: Philipp Rossak >>> --- >>> arch/arm/dts/sun8i-h3-nanopi-m1.dts | 11 +++++++++++ >>> 1 file changed, 11 insertions(+) >>> >>> diff --git a/arch/arm/dts/sun8i-h3-nanopi-m1.dts >>> b/arch/arm/dts/sun8i-h3-nanopi-m1.dts >>> index ec63d10..9c1c380 100644 >>> --- a/arch/arm/dts/sun8i-h3-nanopi-m1.dts >>> +++ b/arch/arm/dts/sun8i-h3-nanopi-m1.dts >>> @@ -55,6 +55,17 @@ >>> status = "okay"; >>> }; >>> >>> +&emac { >>> + phy = <&phy1>; >>> + phy-mode = "mii"; >>> + allwinner,use-internal-phy; >>> + allwinner,leds-active-low; >>> + status = "okay"; >>> + phy1: ethernet-phy at 1 { >>> + reg = <1>; >>> + }; >>> +}; >> >> >> We usually sync Linux for dts changes and I've seen few patches on >> Linux, lets wait Linux to merge. >> >> thanks! >> > Ok thanks, I didn't know this. > > Are there also some plans to snyc the sun8i-dwmac driver? No such plan as of now. > The dt-binings related to the emac are right now different compared to linux > mainline. Yes, I saw others boards also not using Linux binding. May be we can proceed, let me review the patches. thanks! -- Jagan Teki Free Software Engineer | www.openedev.com U-Boot, Linux | Upstream Maintainer Hyderabad, India.