From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jagan Teki Date: Mon, 9 Oct 2017 23:35:41 +0530 Subject: [U-Boot] fsl_esdhc driver is broken with DM In-Reply-To: References: <20171001144930.GG3503@bill-the-cat> Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Mon, Oct 2, 2017 at 4:36 PM, Fabio Estevam wrote: > Hi Jagan, > > On Mon, Oct 2, 2017 at 7:23 AM, Jagan Teki wrote: > >> Yes, currently I'm using DM_MMC for U-Boot proper and recently I've >> moved SPL as well [1]. But I've seen an issue with i.MX6UL while >> moving to OF_SPL > > What exactly is the MX6UL issue you see? I didn't dig much, but the i.MX6UL case has rebooting with DM_MMC for both SPL and U-Boot proper. Log: ----- U-Boot SPL 2017.09-00371-ga81bf43 (Oct 09 2017 - 22:55:26) Trying to boot from MMC1 U-Boot 2017.09-00371-ga81bf43 (Oct 09 2017 - 22:55:26 +0530) CPU: Freescale i.MX6UL rev1.1 528 MHz (running at 396 MHz) CPU: Industrial temperature grade (-40C to 105C) at 33C Reset cause: POR Model: Engicam GEAM6UL DRAM: 128 MiB U-Boot SPL 2017.09-00371-ga81bf43 (Oct 09 2017 - 22:55:26) Trying to boot from MMC1 U-Boot 2017.09-00371-ga81bf43 (Oct 09 2017 - 22:55:26 +0530) CPU: Freescale i.MX6UL rev1.1 528 MHz (running at 396 MHz) CPU: Industrial temperature grade (-40C to 105C) at 36C Reset cause: unknown reset Model: Engicam GEAM6UL DRAM: 128 MiB thanks! -- Jagan Teki Free Software Engineer | www.openedev.com U-Boot, Linux | Upstream Maintainer Hyderabad, India.