From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jagan Teki Date: Mon, 16 Jul 2018 15:42:47 +0530 Subject: [U-Boot] [PATCH 21/25] fastboot: sunxi: Update fastboot mmc default device In-Reply-To: <20180716094621.amirpk6kpus5ow4z@flea.home> References: <20180716081956.32434-1-jagan@amarulasolutions.com> <20180716081956.32434-22-jagan@amarulasolutions.com> <20180716094621.amirpk6kpus5ow4z@flea.home> Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Mon, Jul 16, 2018 at 3:16 PM, Maxime Ripard wrote: > On Mon, Jul 16, 2018 at 01:49:52PM +0530, Jagan Teki wrote: >> Usually eMMC is default env fat device for environment, >> if MMC_SUNXI_SLOT_EXTRA != 1 Sunxi always probed emmc >> device as 1. but with DM_MMC it can be more possible to >> probe eMMC as device 2 since for most of the sunxi platforms >> eMMC is configured mmc2. >> >> So update the fastboot mmc default device as 2 if DM_MMC and >> MMC_SUNXI_SLOT_EXTRA != 1 slot is 2 defined but some boards >> may not use all possible mmc devices or partly disabled in DT, >> for those update the device in board specific defconfig. >> >> Cc: Olliver Schinagl >> Cc: Chen-Yu Tsai >> Signed-off-by: Jagan Teki >> --- >> configs/A20-OLinuXino-Lime2-eMMC_defconfig | 1 + >> configs/Sinlinx_SinA33_defconfig | 1 + >> configs/amarula_a64_relic_defconfig | 1 + >> drivers/fastboot/Kconfig | 3 ++- >> 4 files changed, 5 insertions(+), 1 deletion(-) >> >> diff --git a/configs/A20-OLinuXino-Lime2-eMMC_defconfig b/configs/A20-OLinuXino-Lime2-eMMC_defconfig >> index 5657fc2594..20ea254191 100644 >> --- a/configs/A20-OLinuXino-Lime2-eMMC_defconfig >> +++ b/configs/A20-OLinuXino-Lime2-eMMC_defconfig >> @@ -29,4 +29,5 @@ CONFIG_AXP_ALDO4_VOLT=2800 >> CONFIG_SCSI=y >> CONFIG_USB_EHCI_HCD=y >> CONFIG_USB_MUSB_GADGET=y >> +CONFIG_FASTBOOT_FLASH_MMC_DEV=1 >> CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y >> diff --git a/configs/Sinlinx_SinA33_defconfig b/configs/Sinlinx_SinA33_defconfig >> index 394534b8b5..7841219a65 100644 >> --- a/configs/Sinlinx_SinA33_defconfig >> +++ b/configs/Sinlinx_SinA33_defconfig >> @@ -21,5 +21,6 @@ CONFIG_DFU_RAM=y >> CONFIG_FASTBOOT_CMD_OEM_FORMAT=y >> CONFIG_USB_EHCI_HCD=y >> CONFIG_USB_MUSB_GADGET=y >> +CONFIG_FASTBOOT_FLASH_MMC_DEV=1 > > Your commit doesn't make any sense: the SinaA33 and the Lime2 both > have the eMMC on MMC2, and you claim you want to update the default to > point to MMC2, but you're changing both these boards to point to MMC1 > instead? If DM_MMC and SLOT != 1 => default device 2 which is updated by kconfig, this is with all relevant mmc nodes are enabled but these two boards mmc1 is not enabled so emmc will detected in device 1 > >> CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y >> CONFIG_USB_FUNCTION_MASS_STORAGE=y >> diff --git a/configs/amarula_a64_relic_defconfig b/configs/amarula_a64_relic_defconfig >> index b72cbfabc6..caeb3f6008 100644 >> --- a/configs/amarula_a64_relic_defconfig >> +++ b/configs/amarula_a64_relic_defconfig >> @@ -12,4 +12,5 @@ CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-amarula-relic" >> # CONFIG_SPL_DOS_PARTITION is not set >> # CONFIG_SPL_EFI_PARTITION is not set >> CONFIG_USB_MUSB_GADGET=y >> +CONFIG_FASTBOOT_FLASH_MMC_DEV=0 >> CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y >> diff --git a/drivers/fastboot/Kconfig b/drivers/fastboot/Kconfig >> index bc25ea1d9c..4a1bfd119c 100644 >> --- a/drivers/fastboot/Kconfig >> +++ b/drivers/fastboot/Kconfig >> @@ -88,7 +88,8 @@ config FASTBOOT_FLASH_MMC_DEV >> int "Define FASTBOOT MMC FLASH default device" >> depends on FASTBOOT_FLASH_MMC >> default 0 if ARCH_SUNXI && MMC_SUNXI_SLOT_EXTRA = -1 >> - default 1 if ARCH_SUNXI && MMC_SUNXI_SLOT_EXTRA != -1 >> + default 1 if ARCH_SUNXI && !DM_MMC && MMC_SUNXI_SLOT_EXTRA != -1 >> + default 2 if ARCH_SUNXI && DM_MMC && MMC_SUNXI_SLOT_EXTRA != -1 > > It'd be better to be fixed properly, instead of just relying on a > broken index. I don't think we can't do anything with this now, since this INDEX more rely on SPL for pinctrl enablement. if you have any suggestion please share.