All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH v3 0/2] Update sd card pinconf for sc7180 DT
@ 2021-06-02 19:13 Sujit Kautkar
  2021-06-02 19:13 ` [PATCH v3 1/2] arm64: dts: qcom: sc7180: Move sdc pinconf to board specific DT files Sujit Kautkar
                   ` (2 more replies)
  0 siblings, 3 replies; 7+ messages in thread
From: Sujit Kautkar @ 2021-06-02 19:13 UTC (permalink / raw)
  To: Andy Gross, Bjorn Andersson, Rob Herring
  Cc: Sibi Sankar, Doug Anderson, Rajendra Nayak, Sujit Kautkar,
	Mark Rutland, devicetree, linux-arm-msm, linux-kernel

This patch series contains change to move sdc pinconf from SoC specific
DT file to board specific DT file. It also contain change to set sdc
GPIO pin to bias-pull up

Tested sd card working on sc7180 based board

Changes in v3:
- update commit message in patch 2

Changes in v2:
- added pull-up for IDP

Sujit Kautkar (2):
  arm64: dts: qcom: sc7180: Move sdc pinconf to board specific DT files
  arm64: dts: qcom: sc7180: SD-card GPIO pin set bias-pull up

 arch/arm64/boot/dts/qcom/sc7180-idp.dts      | 102 +++++++++++++++++++
 arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 102 +++++++++++++++++++
 arch/arm64/boot/dts/qcom/sc7180.dtsi         | 102 -------------------
 3 files changed, 204 insertions(+), 102 deletions(-)

-- 
2.32.0.rc0.204.g9fa02ecfa5-goog


^ permalink raw reply	[flat|nested] 7+ messages in thread

* [PATCH v3 1/2] arm64: dts: qcom: sc7180: Move sdc pinconf to board specific DT files
  2021-06-02 19:13 [PATCH v3 0/2] Update sd card pinconf for sc7180 DT Sujit Kautkar
@ 2021-06-02 19:13 ` Sujit Kautkar
  2021-06-03 20:23   ` Doug Anderson
  2021-06-02 19:13 ` [PATCH v3 2/2] arm64: dts: qcom: sc7180: SD-card GPIO pin set bias-pull up Sujit Kautkar
  2021-06-10 14:50 ` [PATCH v3 0/2] Update sd card pinconf for sc7180 DT patchwork-bot+linux-arm-msm
  2 siblings, 1 reply; 7+ messages in thread
From: Sujit Kautkar @ 2021-06-02 19:13 UTC (permalink / raw)
  To: Andy Gross, Bjorn Andersson, Rob Herring
  Cc: Sibi Sankar, Doug Anderson, Rajendra Nayak, Sujit Kautkar,
	Mark Rutland, devicetree, linux-arm-msm, linux-kernel

Move sdc1/sdc2 pinconf from SoC specific DT file to board specific DT
files

Signed-off-by: Sujit Kautkar <sujitka@chromium.org>
---

(no changes since v1)

 arch/arm64/boot/dts/qcom/sc7180-idp.dts      | 102 +++++++++++++++++++
 arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 102 +++++++++++++++++++
 arch/arm64/boot/dts/qcom/sc7180.dtsi         | 102 -------------------
 3 files changed, 204 insertions(+), 102 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
index e77a7926034a7..07133e0af581a 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
@@ -598,4 +598,106 @@ pinconf-rx {
 			bias-pull-up;
 		};
 	};
+
+	sdc1_on: sdc1-on {
+		pinconf-clk {
+			pins = "sdc1_clk";
+			bias-disable;
+			drive-strength = <16>;
+		};
+
+		pinconf-cmd {
+			pins = "sdc1_cmd";
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+
+		pinconf-data {
+			pins = "sdc1_data";
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+
+		pinconf-rclk {
+			pins = "sdc1_rclk";
+			bias-pull-down;
+		};
+	};
+
+	sdc1_off: sdc1-off {
+		pinconf-clk {
+			pins = "sdc1_clk";
+			bias-disable;
+			drive-strength = <2>;
+		};
+
+		pinconf-cmd {
+			pins = "sdc1_cmd";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		pinconf-data {
+			pins = "sdc1_data";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		pinconf-rclk {
+			pins = "sdc1_rclk";
+			bias-pull-down;
+		};
+	};
+
+	sdc2_on: sdc2-on {
+		pinconf-clk {
+			pins = "sdc2_clk";
+			bias-disable;
+			drive-strength = <16>;
+		};
+
+		pinconf-cmd {
+			pins = "sdc2_cmd";
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+
+		pinconf-data {
+			pins = "sdc2_data";
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+
+		pinconf-sd-cd {
+			pins = "gpio69";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+	};
+
+	sdc2_off: sdc2-off {
+		pinconf-clk {
+			pins = "sdc2_clk";
+			bias-disable;
+			drive-strength = <2>;
+		};
+
+		pinconf-cmd {
+			pins = "sdc2_cmd";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		pinconf-data {
+			pins = "sdc2_data";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		pinconf-sd-cd {
+			pins = "gpio69";
+			bias-disable;
+			drive-strength = <2>;
+		};
+	};
 };
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
index 609f0ceafd095..d128a0ed6ad3a 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
@@ -1540,4 +1540,106 @@ pinconf {
 			drive-strength = <2>;
 		};
 	};
+
+	sdc1_on: sdc1-on {
+		pinconf-clk {
+			pins = "sdc1_clk";
+			bias-disable;
+			drive-strength = <16>;
+		};
+
+		pinconf-cmd {
+			pins = "sdc1_cmd";
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+
+		pinconf-data {
+			pins = "sdc1_data";
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+
+		pinconf-rclk {
+			pins = "sdc1_rclk";
+			bias-pull-down;
+		};
+	};
+
+	sdc1_off: sdc1-off {
+		pinconf-clk {
+			pins = "sdc1_clk";
+			bias-disable;
+			drive-strength = <2>;
+		};
+
+		pinconf-cmd {
+			pins = "sdc1_cmd";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		pinconf-data {
+			pins = "sdc1_data";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		pinconf-rclk {
+			pins = "sdc1_rclk";
+			bias-pull-down;
+		};
+	};
+
+	sdc2_on: sdc2-on {
+		pinconf-clk {
+			pins = "sdc2_clk";
+			bias-disable;
+			drive-strength = <16>;
+		};
+
+		pinconf-cmd {
+			pins = "sdc2_cmd";
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+
+		pinconf-data {
+			pins = "sdc2_data";
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+
+		pinconf-sd-cd {
+			pins = "gpio69";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+	};
+
+	sdc2_off: sdc2-off {
+		pinconf-clk {
+			pins = "sdc2_clk";
+			bias-disable;
+			drive-strength = <2>;
+		};
+
+		pinconf-cmd {
+			pins = "sdc2_cmd";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		pinconf-data {
+			pins = "sdc2_data";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		pinconf-sd-cd {
+			pins = "gpio69";
+			bias-disable;
+			drive-strength = <2>;
+		};
+	};
 };
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 1fc328ba0403e..0630a9c410b58 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -1872,108 +1872,6 @@ pinmux {
 					function = "lpass_ext";
 				};
 			};
-
-			sdc1_on: sdc1-on {
-				pinconf-clk {
-					pins = "sdc1_clk";
-					bias-disable;
-					drive-strength = <16>;
-				};
-
-				pinconf-cmd {
-					pins = "sdc1_cmd";
-					bias-pull-up;
-					drive-strength = <10>;
-				};
-
-				pinconf-data {
-					pins = "sdc1_data";
-					bias-pull-up;
-					drive-strength = <10>;
-				};
-
-				pinconf-rclk {
-					pins = "sdc1_rclk";
-					bias-pull-down;
-				};
-			};
-
-			sdc1_off: sdc1-off {
-				pinconf-clk {
-					pins = "sdc1_clk";
-					bias-disable;
-					drive-strength = <2>;
-				};
-
-				pinconf-cmd {
-					pins = "sdc1_cmd";
-					bias-pull-up;
-					drive-strength = <2>;
-				};
-
-				pinconf-data {
-					pins = "sdc1_data";
-					bias-pull-up;
-					drive-strength = <2>;
-				};
-
-				pinconf-rclk {
-					pins = "sdc1_rclk";
-					bias-pull-down;
-				};
-			};
-
-			sdc2_on: sdc2-on {
-				pinconf-clk {
-					pins = "sdc2_clk";
-					bias-disable;
-					drive-strength = <16>;
-				};
-
-				pinconf-cmd {
-					pins = "sdc2_cmd";
-					bias-pull-up;
-					drive-strength = <10>;
-				};
-
-				pinconf-data {
-					pins = "sdc2_data";
-					bias-pull-up;
-					drive-strength = <10>;
-				};
-
-				pinconf-sd-cd {
-					pins = "gpio69";
-					bias-pull-up;
-					drive-strength = <2>;
-				};
-			};
-
-			sdc2_off: sdc2-off {
-				pinconf-clk {
-					pins = "sdc2_clk";
-					bias-disable;
-					drive-strength = <2>;
-				};
-
-				pinconf-cmd {
-					pins = "sdc2_cmd";
-					bias-pull-up;
-					drive-strength = <2>;
-				};
-
-				pinconf-data {
-					pins = "sdc2_data";
-					bias-pull-up;
-					drive-strength = <2>;
-				};
-
-				pinconf-sd-cd {
-					pins = "gpio69";
-					bias-disable;
-					drive-strength = <2>;
-				};
-			};
 		};
 
 		remoteproc_mpss: remoteproc@4080000 {
-- 
2.32.0.rc0.204.g9fa02ecfa5-goog


^ permalink raw reply	[flat|nested] 7+ messages in thread

* [PATCH v3 2/2] arm64: dts: qcom: sc7180: SD-card GPIO pin set bias-pull up
  2021-06-02 19:13 [PATCH v3 0/2] Update sd card pinconf for sc7180 DT Sujit Kautkar
  2021-06-02 19:13 ` [PATCH v3 1/2] arm64: dts: qcom: sc7180: Move sdc pinconf to board specific DT files Sujit Kautkar
@ 2021-06-02 19:13 ` Sujit Kautkar
  2021-06-03 20:33   ` Doug Anderson
  2021-06-10 14:50 ` [PATCH v3 0/2] Update sd card pinconf for sc7180 DT patchwork-bot+linux-arm-msm
  2 siblings, 1 reply; 7+ messages in thread
From: Sujit Kautkar @ 2021-06-02 19:13 UTC (permalink / raw)
  To: Andy Gross, Bjorn Andersson, Rob Herring
  Cc: Sibi Sankar, Doug Anderson, Rajendra Nayak, Sujit Kautkar,
	Mark Rutland, devicetree, linux-arm-msm, linux-kernel

Some SC7180 based board do not have external pull-up for cd-gpio.
Set this pin to internal pull-up for sleep config to avoid frequent
regulator toggle events.

Signed-off-by: Sujit Kautkar <sujitka@chromium.org>
---

Changes in v3:
- remove 'trogdor' from commit message
- move reference patch from commit message

Changes in v2:
- added pull-up for IDP

This change is with reference to Qualcomm's DT change posted at:
https://patchwork.kernel.org/patch/11675347/

 arch/arm64/boot/dts/qcom/sc7180-idp.dts      | 2 +-
 arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
index 07133e0af581a..0c255edb7f3c3 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
@@ -696,7 +696,7 @@ pinconf-data {
 
 		pinconf-sd-cd {
 			pins = "gpio69";
-			bias-disable;
+			bias-pull-up;
 			drive-strength = <2>;
 		};
 	};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
index d128a0ed6ad3a..330deb4967ca2 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
@@ -1638,7 +1638,7 @@ pinconf-data {
 
 		pinconf-sd-cd {
 			pins = "gpio69";
-			bias-disable;
+			bias-pull-up;
 			drive-strength = <2>;
 		};
 	};
-- 
2.32.0.rc0.204.g9fa02ecfa5-goog


^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [PATCH v3 1/2] arm64: dts: qcom: sc7180: Move sdc pinconf to board specific DT files
  2021-06-02 19:13 ` [PATCH v3 1/2] arm64: dts: qcom: sc7180: Move sdc pinconf to board specific DT files Sujit Kautkar
@ 2021-06-03 20:23   ` Doug Anderson
  0 siblings, 0 replies; 7+ messages in thread
From: Doug Anderson @ 2021-06-03 20:23 UTC (permalink / raw)
  To: Sujit Kautkar
  Cc: Andy Gross, Bjorn Andersson, Rob Herring, Sibi Sankar,
	Rajendra Nayak, Mark Rutland,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	linux-arm-msm, LKML

Hi,

On Wed, Jun 2, 2021 at 12:14 PM Sujit Kautkar <sujitka@chromium.org> wrote:
>
> Move sdc1/sdc2 pinconf from SoC specific DT file to board specific DT
> files
>
> Signed-off-by: Sujit Kautkar <sujitka@chromium.org>
> ---
>
> (no changes since v1)
>
>  arch/arm64/boot/dts/qcom/sc7180-idp.dts      | 102 +++++++++++++++++++
>  arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 102 +++++++++++++++++++
>  arch/arm64/boot/dts/qcom/sc7180.dtsi         | 102 -------------------
>  3 files changed, 204 insertions(+), 102 deletions(-)

FYI: Since there were no changes from v2 so you should have kept my
reviewed-by tag from v2. Here it is again, though:

Reviewed-by: Douglas Anderson <dianders@chromium.org>

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [PATCH v3 2/2] arm64: dts: qcom: sc7180: SD-card GPIO pin set bias-pull up
  2021-06-02 19:13 ` [PATCH v3 2/2] arm64: dts: qcom: sc7180: SD-card GPIO pin set bias-pull up Sujit Kautkar
@ 2021-06-03 20:33   ` Doug Anderson
  2021-06-03 21:16     ` Sujit Kautkar
  0 siblings, 1 reply; 7+ messages in thread
From: Doug Anderson @ 2021-06-03 20:33 UTC (permalink / raw)
  To: Sujit Kautkar
  Cc: Andy Gross, Bjorn Andersson, Rob Herring, Sibi Sankar,
	Rajendra Nayak, Mark Rutland,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	linux-arm-msm, LKML

Hi,

On Wed, Jun 2, 2021 at 12:14 PM Sujit Kautkar <sujitka@chromium.org> wrote:
>
> Some SC7180 based board do not have external pull-up for cd-gpio.

nit: s/board/boards

Presumably Bjorn could fix this when he applies the patch. I wouldn't
re-post just for this fix unless Bjorn asks you to.


> Set this pin to internal pull-up for sleep config to avoid frequent
> regulator toggle events.
>
> Signed-off-by: Sujit Kautkar <sujitka@chromium.org>
> ---
>
> Changes in v3:
> - remove 'trogdor' from commit message
> - move reference patch from commit message
>
> Changes in v2:
> - added pull-up for IDP
>
> This change is with reference to Qualcomm's DT change posted at:
> https://patchwork.kernel.org/patch/11675347/
>
>  arch/arm64/boot/dts/qcom/sc7180-idp.dts      | 2 +-
>  arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 2 +-
>  2 files changed, 2 insertions(+), 2 deletions(-)

FYI: I had my Reviewed-by tag on v2. While you did make changes
between v2 and v3, in this case I don't think the changes were
significant enough to warrant removing my Reviewed-by tag and I would
have been happy if you'd kept it.

In general, if you ever have questions about whether you should keep
someone's reviewed tag, it never hurts to mention your logic "after
the cut" (I think you use patman so this would be "Commit-notes:").
For instance, you could say this if you removed Reviewed-by tags:

I totally recombobulated the frobnication logic in v3 and removed
previous Reviewed-by tags. Hopefully reviewers can re-add if they
still think the patch is good.

...or, you could say this if you kept them but you weren't totally
sure it was OK:

Even though every single line in the v3 patch changed from v2, it's
only because I fixed a stoopid spelling Mistake. Thus, I kept previous
Reviewed-by tags. Please yell if you object. Who knew that the only
acceptable spelling of the English word "stupid" in kerneldoc comments
was written as "stoopid". Live and learn.

:-)

In any case, here's my Reviewed-by tag again. I also agree that
Bjorn's comments made sense and were good to fix...

Reviewed-by: Douglas Anderson <dianders@chromium.org>

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [PATCH v3 2/2] arm64: dts: qcom: sc7180: SD-card GPIO pin set bias-pull up
  2021-06-03 20:33   ` Doug Anderson
@ 2021-06-03 21:16     ` Sujit Kautkar
  0 siblings, 0 replies; 7+ messages in thread
From: Sujit Kautkar @ 2021-06-03 21:16 UTC (permalink / raw)
  To: Doug Anderson
  Cc: Andy Gross, Bjorn Andersson, Rob Herring, Sibi Sankar,
	Rajendra Nayak, Mark Rutland,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	linux-arm-msm, LKML

Hi,

On Thu, Jun 03, 2021 at 01:33:07PM -0700, Doug Anderson wrote:
> Hi,
> 
> On Wed, Jun 2, 2021 at 12:14 PM Sujit Kautkar <sujitka@chromium.org> wrote:
> >
> > Some SC7180 based board do not have external pull-up for cd-gpio.
> 
> nit: s/board/boards
> 
> Presumably Bjorn could fix this when he applies the patch. I wouldn't
> re-post just for this fix unless Bjorn asks you to.
I can repost this patch again with this fix if required

> FYI: I had my Reviewed-by tag on v2. While you did make changes
> between v2 and v3, in this case I don't think the changes were
> significant enough to warrant removing my Reviewed-by tag and I would
> have been happy if you'd kept it.
> 
> In general, if you ever have questions about whether you should keep
> someone's reviewed tag, it never hurts to mention your logic "after
> the cut" (I think you use patman so this would be "Commit-notes:").
> For instance, you could say this if you removed Reviewed-by tags:
>
It is good to know this.

> I totally recombobulated the frobnication logic in v3 and removed
> previous Reviewed-by tags. Hopefully reviewers can re-add if they
> still think the patch is good.
> 
> ...or, you could say this if you kept them but you weren't totally
> sure it was OK:
> 
> Even though every single line in the v3 patch changed from v2, it's
> only because I fixed a stoopid spelling Mistake. Thus, I kept previous
> Reviewed-by tags. Please yell if you object. Who knew that the only
> acceptable spelling of the English word "stupid" in kerneldoc comments
> was written as "stoopid". Live and learn.
> 
> :-)
> 
> In any case, here's my Reviewed-by tag again. I also agree that
> Bjorn's comments made sense and were good to fix...
> 
> Reviewed-by: Douglas Anderson <dianders@chromium.org>
Thanks for adding review tag again. I intended to keep this tag since
only commit message is updated, but I forgot to add it back while
posting latest version.

-Sujit


^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [PATCH v3 0/2] Update sd card pinconf for sc7180 DT
  2021-06-02 19:13 [PATCH v3 0/2] Update sd card pinconf for sc7180 DT Sujit Kautkar
  2021-06-02 19:13 ` [PATCH v3 1/2] arm64: dts: qcom: sc7180: Move sdc pinconf to board specific DT files Sujit Kautkar
  2021-06-02 19:13 ` [PATCH v3 2/2] arm64: dts: qcom: sc7180: SD-card GPIO pin set bias-pull up Sujit Kautkar
@ 2021-06-10 14:50 ` patchwork-bot+linux-arm-msm
  2 siblings, 0 replies; 7+ messages in thread
From: patchwork-bot+linux-arm-msm @ 2021-06-10 14:50 UTC (permalink / raw)
  To: Sujit Kautkar; +Cc: linux-arm-msm

Hello:

This series was applied to qcom/linux.git (refs/heads/for-next):

On Wed,  2 Jun 2021 12:13:37 -0700 you wrote:
> This patch series contains change to move sdc pinconf from SoC specific
> DT file to board specific DT file. It also contain change to set sdc
> GPIO pin to bias-pull up
> 
> Tested sd card working on sc7180 based board
> 
> Changes in v3:
> - update commit message in patch 2
> 
> [...]

Here is the summary with links:
  - [v3,1/2] arm64: dts: qcom: sc7180: Move sdc pinconf to board specific DT files
    https://git.kernel.org/qcom/c/c8d6f8e5307d
  - [v3,2/2] arm64: dts: qcom: sc7180: SD-card GPIO pin set bias-pull up
    https://git.kernel.org/qcom/c/71208cd4b1ff

You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html



^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, other threads:[~2021-06-10 14:50 UTC | newest]

Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-06-02 19:13 [PATCH v3 0/2] Update sd card pinconf for sc7180 DT Sujit Kautkar
2021-06-02 19:13 ` [PATCH v3 1/2] arm64: dts: qcom: sc7180: Move sdc pinconf to board specific DT files Sujit Kautkar
2021-06-03 20:23   ` Doug Anderson
2021-06-02 19:13 ` [PATCH v3 2/2] arm64: dts: qcom: sc7180: SD-card GPIO pin set bias-pull up Sujit Kautkar
2021-06-03 20:33   ` Doug Anderson
2021-06-03 21:16     ` Sujit Kautkar
2021-06-10 14:50 ` [PATCH v3 0/2] Update sd card pinconf for sc7180 DT patchwork-bot+linux-arm-msm

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.