On Wed, Apr 13, 2022 at 1:33 PM Michele Ballabio wrote: > > On Mon, 11 Apr 2022 14:34:37 -0400 > Alex Deucher wrote: > > > On Sat, Apr 9, 2022 at 12:28 PM Michele Ballabio > > wrote: > > > > > > On Tue, 5 Apr 2022 10:23:16 -0400 > > > Alex Deucher wrote: > > > > > > > On Mon, Apr 4, 2022 at 3:39 PM Michele Ballabio > > > > wrote: > > > > > > > > > > On Mon, 4 Apr 2022 13:03:41 -0400 > > > > > Alex Deucher wrote: > > > > > > > > > > > On Sun, Apr 3, 2022 at 10:19 AM Michele Ballabio > > > > > > wrote: > > > > > > > > > > > > > > Hi, > > > > > > > I've hit a regression on 5.17.1 (haven't tested > > > > > > > 5.17.0, but 5.16-stable didn't have this problem). > > > > > > > > > > > > > > The machine is a Ryzen 5 1600 with AMD graphics (RX 560). > > > > > > > > > > > > > > The regression I hit seems to trigger when the machine is > > > > > > > left idle at boot (I don't boot straight to X, I boot to a > > > > > > > tty, login and then start X). The machine after a while > > > > > > > blanks the screen. Usually, the screen unblanks as the > > > > > > > keyboard is hit or the mouse moves, but with kernel 5.17.1 > > > > > > > the screen does not wake up. The machine seems to run > > > > > > > mostly fine: I can login from ssh, but I cannot reboot or > > > > > > > halt it: a sysrq sequence is needed for that. Note that if > > > > > > > the screen goes blank under X, it wakes up fine. > > > > > > > > > > > > > > Below a dmesg and two traces from syslog (they're quite > > > > > > > similar). > > > > > > > > > > > > Can you bisect? Does setting amdgpu.runpm=0 help? > > > > > > > > > > I can try to bisect, should I narrow the search to > > > > > drivers/gpu/drm/ ? > > > > > > > > I would just do a full bisect if possible in case the change > > > > happens to be outside of drm. > > > > > > > > > > > > > > Setting amdgpu.runpm=0 works, the display now unblanks without > > > > > problems. > > > > > > > > > > Hi, > > > I bisected this, and the first bad commit is > > > [087451f372bf76d971184caa258807b7c35aac8f] drm/amdgpu: use generic > > > fb helpers instead of setting up AMD own's. > > > > > > Let me know if you need some more testing. > > > > Thanks. Do the attached patches fix the issue? > > > > Thanks, > > > > Alex > > Sorry, no. I applied them both on top of 5.17.1. Thanks. Please try the attached patch. Thanks, Alex > I'm pasting the output of dmesg and decode_stacktrace.sh: > > dmesg: > ------- > > [ 0.000000] Linux version 5.17.1+ (mike@darkstar.example.org) (gcc (GCC) 11.2.0, GNU ld version 2.38-slack151) #221 SMP PREEMPT Wed Apr 13 18:51:36 CEST 2022 > [ 0.000000] Command line: BOOT_IMAGE=bzImage ro root=806 debug > [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' > [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' > [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' > [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 > [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format. > [ 0.000000] signal: max sigframe size: 1776 > [ 0.000000] BIOS-provided physical RAM map: > [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable > [ 0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved > [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved > [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000003ffffff] usable > [ 0.000000] BIOS-e820: [mem 0x0000000004000000-0x0000000004009fff] ACPI NVS > [ 0.000000] BIOS-e820: [mem 0x000000000400a000-0x0000000009bfffff] usable > [ 0.000000] BIOS-e820: [mem 0x0000000009c00000-0x0000000009ffffff] reserved > [ 0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000affffff] usable > [ 0.000000] BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved > [ 0.000000] BIOS-e820: [mem 0x000000000b020000-0x00000000d4434fff] usable > [ 0.000000] BIOS-e820: [mem 0x00000000d4435000-0x00000000d444ffff] ACPI data > [ 0.000000] BIOS-e820: [mem 0x00000000d4450000-0x00000000da830fff] usable > [ 0.000000] BIOS-e820: [mem 0x00000000da831000-0x00000000da970fff] reserved > [ 0.000000] BIOS-e820: [mem 0x00000000da971000-0x00000000da97afff] ACPI data > [ 0.000000] BIOS-e820: [mem 0x00000000da97b000-0x00000000daa82fff] usable > [ 0.000000] BIOS-e820: [mem 0x00000000daa83000-0x00000000dae3efff] ACPI NVS > [ 0.000000] BIOS-e820: [mem 0x00000000dae3f000-0x00000000db93efff] reserved > [ 0.000000] BIOS-e820: [mem 0x00000000db93f000-0x00000000ddffffff] usable > [ 0.000000] BIOS-e820: [mem 0x00000000de000000-0x00000000dfffffff] reserved > [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved > [ 0.000000] BIOS-e820: [mem 0x00000000fd800000-0x00000000fdffffff] reserved > [ 0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved > [ 0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved > [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved > [ 0.000000] BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved > [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved > [ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved > [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved > [ 0.000000] BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved > [ 0.000000] BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved > [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved > [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved > [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041f37ffff] usable > [ 0.000000] NX (Execute Disable) protection: active > [ 0.000000] SMBIOS 3.1.1 present. > [ 0.000000] DMI: System manufacturer System Product Name/PRIME B350-PLUS, BIOS 4011 04/19/2018 > [ 0.000000] tsc: Fast TSC calibration failed > [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved > [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable > [ 0.000000] last_pfn = 0x41f380 max_arch_pfn = 0x400000000 > [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT > [ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved > [ 0.000000] last_pfn = 0xde000 max_arch_pfn = 0x400000000 > [ 0.000000] Using GB pages for direct mapping > [ 0.000000] ACPI: Early table checksum verification disabled > [ 0.000000] ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA) > [ 0.000000] ACPI: XSDT 0x00000000D4435098 0000A4 (v01 ALASKA A M I 01072009 AMI 00010013) > [ 0.000000] ACPI: FACP 0x00000000D443FAC0 000114 (v06 ALASKA A M I 01072009 AMI 00010013) > [ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20211217/tbfadt-615) > [ 0.000000] ACPI: DSDT 0x00000000D44351D0 00A8EA (v02 ALASKA A M I 01072009 INTL 20120913) > [ 0.000000] ACPI: FACS 0x00000000DAE27E00 000040 > [ 0.000000] ACPI: APIC 0x00000000D443FBD8 0000DE (v03 ALASKA A M I 01072009 AMI 00010013) > [ 0.000000] ACPI: FPDT 0x00000000D443FCB8 000044 (v01 ALASKA A M I 01072009 AMI 00010013) > [ 0.000000] ACPI: FIDT 0x00000000D443FD00 00009C (v01 ALASKA A M I 01072009 AMI 00010013) > [ 0.000000] ACPI: SSDT 0x00000000D444E140 001A41 (v01 AMD AmdTable 00000001 INTL 20120913) > [ 0.000000] ACPI: SSDT 0x00000000D443FDF8 008C98 (v02 AMD AMD ALIB 00000002 MSFT 04000000) > [ 0.000000] ACPI: SSDT 0x00000000D4448A90 001A58 (v01 AMD AMD CPU 00000001 AMD 00000001) > [ 0.000000] ACPI: CRAT 0x00000000D444A4E8 000BD0 (v01 AMD AMD CRAT 00000001 AMD 00000001) > [ 0.000000] ACPI: CDIT 0x00000000D444B0B8 000029 (v01 AMD AMD CDIT 00000001 AMD 00000001) > [ 0.000000] ACPI: SSDT 0x00000000D444B0E8 002DA8 (v01 AMD AMD AOD 00000001 INTL 20120913) > [ 0.000000] ACPI: MCFG 0x00000000D444DE90 00003C (v01 ALASKA A M I 01072009 MSFT 00010013) > [ 0.000000] ACPI: HPET 0x00000000D444DED0 000038 (v01 ALASKA A M I 01072009 AMI 00000005) > [ 0.000000] ACPI: SSDT 0x00000000D444DF08 000024 (v01 AMDFCH FCHZP 00001000 INTL 20120913) > [ 0.000000] ACPI: UEFI 0x00000000D444DF30 000042 (v01 00000000 00000000) > [ 0.000000] ACPI: IVRS 0x00000000D444DF78 0000D0 (v02 AMD AMD IVRS 00000001 AMD 00000000) > [ 0.000000] ACPI: SSDT 0x00000000D444E048 0000F8 (v01 AMD AMD PT 00001000 INTL 20120913) > [ 0.000000] ACPI: Reserving FACP table memory at [mem 0xd443fac0-0xd443fbd3] > [ 0.000000] ACPI: Reserving DSDT table memory at [mem 0xd44351d0-0xd443fab9] > [ 0.000000] ACPI: Reserving FACS table memory at [mem 0xdae27e00-0xdae27e3f] > [ 0.000000] ACPI: Reserving APIC table memory at [mem 0xd443fbd8-0xd443fcb5] > [ 0.000000] ACPI: Reserving FPDT table memory at [mem 0xd443fcb8-0xd443fcfb] > [ 0.000000] ACPI: Reserving FIDT table memory at [mem 0xd443fd00-0xd443fd9b] > [ 0.000000] ACPI: Reserving SSDT table memory at [mem 0xd444e140-0xd444fb80] > [ 0.000000] ACPI: Reserving SSDT table memory at [mem 0xd443fdf8-0xd4448a8f] > [ 0.000000] ACPI: Reserving SSDT table memory at [mem 0xd4448a90-0xd444a4e7] > [ 0.000000] ACPI: Reserving CRAT table memory at [mem 0xd444a4e8-0xd444b0b7] > [ 0.000000] ACPI: Reserving CDIT table memory at [mem 0xd444b0b8-0xd444b0e0] > [ 0.000000] ACPI: Reserving SSDT table memory at [mem 0xd444b0e8-0xd444de8f] > [ 0.000000] ACPI: Reserving MCFG table memory at [mem 0xd444de90-0xd444decb] > [ 0.000000] ACPI: Reserving HPET table memory at [mem 0xd444ded0-0xd444df07] > [ 0.000000] ACPI: Reserving SSDT table memory at [mem 0xd444df08-0xd444df2b] > [ 0.000000] ACPI: Reserving UEFI table memory at [mem 0xd444df30-0xd444df71] > [ 0.000000] ACPI: Reserving IVRS table memory at [mem 0xd444df78-0xd444e047] > [ 0.000000] ACPI: Reserving SSDT table memory at [mem 0xd444e048-0xd444e13f] > [ 0.000000] system APIC only can use physical flat > [ 0.000000] Setting APIC routing to physical flat. > [ 0.000000] No NUMA configuration found > [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000041f37ffff] > [ 0.000000] NODE_DATA(0) allocated [mem 0x41f37b000-0x41f37ffff] > [ 0.000000] Zone ranges: > [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] > [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] > [ 0.000000] Normal [mem 0x0000000100000000-0x000000041f37ffff] > [ 0.000000] Device empty > [ 0.000000] Movable zone start for each node > [ 0.000000] Early memory node ranges > [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff] > [ 0.000000] node 0: [mem 0x0000000000100000-0x0000000003ffffff] > [ 0.000000] node 0: [mem 0x000000000400a000-0x0000000009bfffff] > [ 0.000000] node 0: [mem 0x000000000a000000-0x000000000affffff] > [ 0.000000] node 0: [mem 0x000000000b020000-0x00000000d4434fff] > [ 0.000000] node 0: [mem 0x00000000d4450000-0x00000000da830fff] > [ 0.000000] node 0: [mem 0x00000000da97b000-0x00000000daa82fff] > [ 0.000000] node 0: [mem 0x00000000db93f000-0x00000000ddffffff] > [ 0.000000] node 0: [mem 0x0000000100000000-0x000000041f37ffff] > [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000041f37ffff] > [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges > [ 0.000000] On node 0, zone DMA: 99 pages in unavailable ranges > [ 0.000000] On node 0, zone DMA32: 10 pages in unavailable ranges > [ 0.000000] On node 0, zone DMA32: 1024 pages in unavailable ranges > [ 0.000000] On node 0, zone DMA32: 32 pages in unavailable ranges > [ 0.000000] On node 0, zone DMA32: 27 pages in unavailable ranges > [ 0.000000] On node 0, zone DMA32: 330 pages in unavailable ranges > [ 0.000000] On node 0, zone DMA32: 3772 pages in unavailable ranges > [ 0.000000] On node 0, zone Normal: 8192 pages in unavailable ranges > [ 0.000000] On node 0, zone Normal: 3200 pages in unavailable ranges > [ 0.000000] ACPI: PM-Timer IO Port: 0x808 > [ 0.000000] system APIC only can use physical flat > [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) > [ 0.000000] IOAPIC[0]: apic_id 13, version 33, address 0xfec00000, GSI 0-23 > [ 0.000000] IOAPIC[1]: apic_id 14, version 33, address 0xfec01000, GSI 24-55 > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) > [ 0.000000] ACPI: Using ACPI (MADT) for SMP configuration information > [ 0.000000] ACPI: HPET id: 0x10228201 base: 0xfed00000 > [ 0.000000] smpboot: Allowing 16 CPUs, 4 hotplug CPUs > [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] > [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009dfff] > [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009ffff] > [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff] > [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff] > [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0x04000000-0x04009fff] > [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0x09c00000-0x09ffffff] > [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0x0b000000-0x0b01ffff] > [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xd4435000-0xd444ffff] > [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xda831000-0xda970fff] > [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xda971000-0xda97afff] > [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xdaa83000-0xdae3efff] > [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xdae3f000-0xdb93efff] > [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xde000000-0xdfffffff] > [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xf7ffffff] > [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfbffffff] > [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfc000000-0xfd7fffff] > [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfd800000-0xfdffffff] > [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe9fffff] > [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfea00000-0xfea0ffff] > [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff] > [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfeb80000-0xfec01fff] > [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfec02000-0xfec0ffff] > [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff] > [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfec2ffff] > [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfec30000-0xfec30fff] > [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfec31000-0xfecfffff] > [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff] > [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed3ffff] > [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfed44fff] > [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed45000-0xfed7ffff] > [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed8ffff] > [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfedc1fff] > [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfedc2000-0xfedcffff] > [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff] > [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff] > [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfedd6000-0xfedfffff] > [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfeefffff] > [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfef00000-0xfeffffff] > [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff] > [ 0.000000] [mem 0xe0000000-0xf7ffffff] available for PCI devices > [ 0.000000] Booting paravirtualized kernel on bare hardware > [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns > [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:16 nr_node_ids:1 > [ 0.000000] percpu: Embedded 59 pages/cpu s204800 r8192 d28672 u262144 > [ 0.000000] pcpu-alloc: s204800 r8192 d28672 u262144 alloc=1*2097152 > [ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 > [ 0.000000] Fallback order for Node 0: 0 > [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 4112184 > [ 0.000000] Policy zone: Normal > [ 0.000000] Kernel command line: BOOT_IMAGE=bzImage ro root=806 debug > [ 0.000000] Unknown kernel command line parameters "BOOT_IMAGE=bzImage", will be passed to user space. > [ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) > [ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) > [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off > [ 0.000000] Memory: 16301444K/16710468K available (22542K kernel code, 3541K rwdata, 9392K rodata, 1884K init, 4236K bss, 408764K reserved, 0K cma-reserved) > [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x28/0x530 with crng_init=0 > [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1 > [ 0.000000] ftrace: allocating 63796 entries in 250 pages > [ 0.000000] ftrace: allocated 250 pages with 6 groups > [ 0.000000] Dynamic Preempt: full > [ 0.000000] rcu: Preemptible hierarchical RCU implementation. > [ 0.000000] rcu: CONFIG_RCU_FANOUT set to non-default value of 32. > [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=16. > [ 0.000000] Trampoline variant of Tasks RCU enabled. > [ 0.000000] Rude variant of Tasks RCU enabled. > [ 0.000000] Tracing variant of Tasks RCU enabled. > [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. > [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16 > [ 0.000000] NR_IRQS: 16640, nr_irqs: 1096, preallocated irqs: 16 > [ 0.000000] random: crng init done (trusting CPU's manufacturer) > [ 0.000000] Console: colour VGA+ 80x25 > [ 0.000000] printk: console [tty0] enabled > [ 0.000000] ACPI: Core revision 20211217 > [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns > [ 0.000000] APIC: Switch to symmetric I/O mode setup > [ 0.001000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 > [ 0.007000] tsc: PIT calibration matches HPET. 1 loops > [ 0.007000] tsc: Detected 3193.623 MHz processor > [ 0.000004] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2e08c1da398, max_idle_ns: 440795268375 ns > [ 0.000080] Calibrating delay loop (skipped), value calculated using timer frequency.. 6387.24 BogoMIPS (lpj=3193623) > [ 0.000496] pid_max: default: 32768 minimum: 301 > [ 0.000576] LSM: Security Framework initializing > [ 0.000661] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) > [ 0.000747] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) > [ 0.001232] LVT offset 1 assigned for vector 0xf9 > [ 0.001350] LVT offset 2 assigned for vector 0xf4 > [ 0.001423] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512 > [ 0.001484] Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0 > [ 0.001549] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization > [ 0.001620] Spectre V2 : Mitigation: Retpolines > [ 0.001678] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch > [ 0.001748] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier > [ 0.001818] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl > [ 0.003640] Freeing SMP alternatives memory: 52K > [ 0.106859] smpboot: CPU0: AMD Ryzen 5 1600 Six-Core Processor (family: 0x17, model: 0x1, stepping: 0x1) > [ 0.107026] cblist_init_generic: Setting adjustable number of callback queues. > [ 0.107079] cblist_init_generic: Setting shift to 4 and lim to 1. > [ 0.107079] cblist_init_generic: Setting shift to 4 and lim to 1. > [ 0.107079] cblist_init_generic: Setting shift to 4 and lim to 1. > [ 0.107079] Performance Events: Fam17h+ core perfctr, AMD PMU driver. > [ 0.107079] ... version: 0 > [ 0.107079] ... bit width: 48 > [ 0.107079] ... generic registers: 6 > [ 0.107079] ... value mask: 0000ffffffffffff > [ 0.107079] ... max period: 00007fffffffffff > [ 0.107079] ... fixed-purpose events: 0 > [ 0.107079] ... event mask: 000000000000003f > [ 0.107079] rcu: Hierarchical SRCU implementation. > [ 0.107204] MCE: In-kernel MCE decoding enabled. > [ 0.107356] smp: Bringing up secondary CPUs ... > [ 0.107478] x86: Booting SMP configuration: > [ 0.107535] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 > [ 0.121101] smp: Brought up 1 node, 12 CPUs > [ 0.121227] smpboot: Max logical packages: 2 > [ 0.121285] smpboot: Total of 12 processors activated (76646.95 BogoMIPS) > [ 0.122529] devtmpfs: initialized > [ 0.122529] x86/mm: Memory block size: 128MB > [ 0.123727] ACPI: PM: Registering ACPI NVS region [mem 0x04000000-0x04009fff] (40960 bytes) > [ 0.123727] ACPI: PM: Registering ACPI NVS region [mem 0xdaa83000-0xdae3efff] (3915776 bytes) > [ 0.123727] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns > [ 0.124086] futex hash table entries: 4096 (order: 6, 262144 bytes, linear) > [ 0.124197] pinctrl core: initialized pinctrl subsystem > [ 0.124444] NET: Registered PF_NETLINK/PF_ROUTE protocol family > [ 0.124586] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations > [ 0.124653] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations > [ 0.124723] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations > [ 0.124801] audit: initializing netlink subsys (disabled) > [ 0.124867] audit: type=2000 audit(1649868999.131:1): state=initialized audit_enabled=0 res=1 > [ 0.124867] thermal_sys: Registered thermal governor 'fair_share' > [ 0.124867] thermal_sys: Registered thermal governor 'bang_bang' > [ 0.124867] thermal_sys: Registered thermal governor 'step_wise' > [ 0.125081] thermal_sys: Registered thermal governor 'user_space' > [ 0.125152] cpuidle: using governor ladder > [ 0.126140] cpuidle: using governor menu > [ 0.127114] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 > [ 0.127212] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) > [ 0.127287] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 > [ 0.127359] PCI: Using configuration type 1 for base access > [ 0.130847] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages > [ 0.130847] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages > [ 0.131100] cryptd: max_cpu_qlen set to 1000 > [ 0.131180] raid6: skipped pq benchmark and selected avx2x4 > [ 0.131180] raid6: using avx2x2 recovery algorithm > [ 0.131251] ACPI: Added _OSI(Module Device) > [ 0.131309] ACPI: Added _OSI(Processor Device) > [ 0.131367] ACPI: Added _OSI(3.0 _SCP Extensions) > [ 0.131425] ACPI: Added _OSI(Processor Aggregator Device) > [ 0.131486] ACPI: Added _OSI(Linux-Dell-Video) > [ 0.131544] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) > [ 0.131605] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) > [ 0.140402] ACPI: 7 ACPI AML tables successfully acquired and loaded > [ 0.141614] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored > [ 0.144030] ACPI: Interpreter enabled > [ 0.144097] ACPI: PM: (supports S0 S3 S4 S5) > [ 0.144155] ACPI: Using IOAPIC for interrupt routing > [ 0.144494] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug > [ 0.144811] ACPI: Enabled 4 GPEs in block 00 to 1F > [ 0.160676] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) > [ 0.160743] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] > [ 0.160892] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME LTR DPC] > [ 0.161099] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability] > [ 0.161170] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge > [ 0.161507] PCI host bridge to bus 0000:00 > [ 0.161566] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] > [ 0.161630] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] > [ 0.161694] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] > [ 0.161758] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] > [ 0.161822] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window] > [ 0.161891] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec2ffff window] > [ 0.161959] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window] > [ 0.162027] pci_bus 0000:00: root bus resource [bus 00-ff] > [ 0.162091] pci 0000:00:00.0: [1022:1450] type 00 class 0x060000 > [ 0.162227] pci 0000:00:00.2: [1022:1451] type 00 class 0x080600 > [ 0.162369] pci 0000:00:01.0: [1022:1452] type 00 class 0x060000 > [ 0.162480] pci 0000:00:01.3: [1022:1453] type 01 class 0x060400 > [ 0.162638] pci 0000:00:01.3: PME# supported from D0 D3hot D3cold > [ 0.163146] pci 0000:00:02.0: [1022:1452] type 00 class 0x060000 > [ 0.163263] pci 0000:00:03.0: [1022:1452] type 00 class 0x060000 > [ 0.163365] pci 0000:00:03.1: [1022:1453] type 01 class 0x060400 > [ 0.163518] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold > [ 0.163678] pci 0000:00:04.0: [1022:1452] type 00 class 0x060000 > [ 0.163799] pci 0000:00:07.0: [1022:1452] type 00 class 0x060000 > [ 0.163901] pci 0000:00:07.1: [1022:1454] type 01 class 0x060400 > [ 0.164082] pci 0000:00:07.1: enabling Extended Tags > [ 0.164205] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold > [ 0.164361] pci 0000:00:08.0: [1022:1452] type 00 class 0x060000 > [ 0.164463] pci 0000:00:08.1: [1022:1454] type 01 class 0x060400 > [ 0.164552] pci 0000:00:08.1: enabling Extended Tags > [ 0.164675] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold > [ 0.165208] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500 > [ 0.165472] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100 > [ 0.165738] pci 0000:00:18.0: [1022:1460] type 00 class 0x060000 > [ 0.165828] pci 0000:00:18.1: [1022:1461] type 00 class 0x060000 > [ 0.165918] pci 0000:00:18.2: [1022:1462] type 00 class 0x060000 > [ 0.166007] pci 0000:00:18.3: [1022:1463] type 00 class 0x060000 > [ 0.166114] pci 0000:00:18.4: [1022:1464] type 00 class 0x060000 > [ 0.166205] pci 0000:00:18.5: [1022:1465] type 00 class 0x060000 > [ 0.166294] pci 0000:00:18.6: [1022:1466] type 00 class 0x060000 > [ 0.166383] pci 0000:00:18.7: [1022:1467] type 00 class 0x060000 > [ 0.166560] pci 0000:01:00.0: [1022:43bb] type 00 class 0x0c0330 > [ 0.166636] pci 0000:01:00.0: reg 0x10: [mem 0xfe7a0000-0xfe7a7fff 64bit] > [ 0.166779] pci 0000:01:00.0: PME# supported from D3hot D3cold > [ 0.166934] pci 0000:01:00.1: [1022:43b7] type 00 class 0x010601 > [ 0.167035] pci 0000:01:00.1: reg 0x24: [mem 0xfe780000-0xfe79ffff] > [ 0.167086] pci 0000:01:00.1: reg 0x30: [mem 0xfe700000-0xfe77ffff pref] > [ 0.167188] pci 0000:01:00.1: PME# supported from D3hot D3cold > [ 0.167314] pci 0000:01:00.2: [1022:43b2] type 01 class 0x060400 > [ 0.167450] pci 0000:01:00.2: PME# supported from D3hot D3cold > [ 0.167593] pci 0000:00:01.3: PCI bridge to [bus 01-06] > [ 0.167655] pci 0000:00:01.3: bridge window [io 0xf000-0xffff] > [ 0.167718] pci 0000:00:01.3: bridge window [mem 0xfe600000-0xfe7fffff] > [ 0.167859] pci 0000:02:00.0: [1022:43b4] type 01 class 0x060400 > [ 0.168010] pci 0000:02:00.0: PME# supported from D3hot D3cold > [ 0.168163] pci 0000:02:01.0: [1022:43b4] type 01 class 0x060400 > [ 0.168313] pci 0000:02:01.0: PME# supported from D3hot D3cold > [ 0.168459] pci 0000:02:04.0: [1022:43b4] type 01 class 0x060400 > [ 0.168609] pci 0000:02:04.0: PME# supported from D3hot D3cold > [ 0.168760] pci 0000:01:00.2: PCI bridge to [bus 02-06] > [ 0.168823] pci 0000:01:00.2: bridge window [io 0xf000-0xffff] > [ 0.168887] pci 0000:01:00.2: bridge window [mem 0xfe600000-0xfe6fffff] > [ 0.169015] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 > [ 0.169106] pci 0000:03:00.0: reg 0x10: [io 0xf000-0xf0ff] > [ 0.169201] pci 0000:03:00.0: reg 0x18: [mem 0xfe604000-0xfe604fff 64bit] > [ 0.169286] pci 0000:03:00.0: reg 0x20: [mem 0xfe600000-0xfe603fff 64bit] > [ 0.169490] pci 0000:03:00.0: supports D1 D2 > [ 0.169548] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold > [ 0.169794] pci 0000:02:00.0: PCI bridge to [bus 03] > [ 0.169857] pci 0000:02:00.0: bridge window [io 0xf000-0xffff] > [ 0.169921] pci 0000:02:00.0: bridge window [mem 0xfe600000-0xfe6fffff] > [ 0.170080] pci 0000:04:00.0: [1b21:1080] type 01 class 0x060400 > [ 0.170328] pci 0000:04:00.0: supports D1 D2 > [ 0.170386] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold > [ 0.173103] pci 0000:02:01.0: PCI bridge to [bus 04-05] > [ 0.173239] pci_bus 0000:05: extended config space not accessible > [ 0.173402] pci 0000:04:00.0: PCI bridge to [bus 05] > [ 0.173529] pci 0000:02:04.0: PCI bridge to [bus 06] > [ 0.173677] pci 0000:07:00.0: [1002:67ff] type 00 class 0x030000 > [ 0.173753] pci 0000:07:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref] > [ 0.173831] pci 0000:07:00.0: reg 0x18: [mem 0xf0000000-0xf01fffff 64bit pref] > [ 0.173905] pci 0000:07:00.0: reg 0x20: [io 0xe000-0xe0ff] > [ 0.173972] pci 0000:07:00.0: reg 0x24: [mem 0xfe900000-0xfe93ffff] > [ 0.174040] pci 0000:07:00.0: reg 0x30: [mem 0xfe940000-0xfe95ffff pref] > [ 0.174101] pci 0000:07:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] > [ 0.174225] pci 0000:07:00.0: supports D1 D2 > [ 0.174283] pci 0000:07:00.0: PME# supported from D1 D2 D3hot D3cold > [ 0.174468] pci 0000:07:00.1: [1002:aae0] type 00 class 0x040300 > [ 0.174545] pci 0000:07:00.1: reg 0x10: [mem 0xfe960000-0xfe963fff 64bit] > [ 0.174683] pci 0000:07:00.1: supports D1 D2 > [ 0.174809] pci 0000:00:03.1: PCI bridge to [bus 07] > [ 0.174871] pci 0000:00:03.1: bridge window [io 0xe000-0xefff] > [ 0.174934] pci 0000:00:03.1: bridge window [mem 0xfe900000-0xfe9fffff] > [ 0.174999] pci 0000:00:03.1: bridge window [mem 0xe0000000-0xf01fffff 64bit pref] > [ 0.175146] pci 0000:08:00.0: [1022:145a] type 00 class 0x130000 > [ 0.175235] pci 0000:08:00.0: enabling Extended Tags > [ 0.175365] pci 0000:08:00.2: [1022:1456] type 00 class 0x108000 > [ 0.175439] pci 0000:08:00.2: reg 0x18: [mem 0xfe400000-0xfe4fffff] > [ 0.175511] pci 0000:08:00.2: reg 0x24: [mem 0xfe500000-0xfe501fff] > [ 0.175580] pci 0000:08:00.2: enabling Extended Tags > [ 0.175722] pci 0000:08:00.3: [1022:145c] type 00 class 0x0c0330 > [ 0.175793] pci 0000:08:00.3: reg 0x10: [mem 0xfe300000-0xfe3fffff 64bit] > [ 0.175875] pci 0000:08:00.3: enabling Extended Tags > [ 0.175960] pci 0000:08:00.3: PME# supported from D0 D3hot D3cold > [ 0.176105] pci 0000:00:07.1: PCI bridge to [bus 08] > [ 0.176168] pci 0000:00:07.1: bridge window [mem 0xfe300000-0xfe5fffff] > [ 0.176299] pci 0000:09:00.0: [1022:1455] type 00 class 0x130000 > [ 0.176390] pci 0000:09:00.0: enabling Extended Tags > [ 0.176523] pci 0000:09:00.2: [1022:7901] type 00 class 0x010601 > [ 0.176608] pci 0000:09:00.2: reg 0x24: [mem 0xfe808000-0xfe808fff] > [ 0.176677] pci 0000:09:00.2: enabling Extended Tags > [ 0.176765] pci 0000:09:00.2: PME# supported from D3hot D3cold > [ 0.176885] pci 0000:09:00.3: [1022:1457] type 00 class 0x040300 > [ 0.176954] pci 0000:09:00.3: reg 0x10: [mem 0xfe800000-0xfe807fff] > [ 0.177040] pci 0000:09:00.3: enabling Extended Tags > [ 0.177108] pci 0000:09:00.3: PME# supported from D0 D3hot D3cold > [ 0.177233] pci 0000:00:08.1: PCI bridge to [bus 09] > [ 0.177296] pci 0000:00:08.1: bridge window [mem 0xfe800000-0xfe8fffff] > [ 0.177667] ACPI: PCI: Interrupt link LNKA configured for IRQ 0 > [ 0.177774] ACPI: PCI: Interrupt link LNKB configured for IRQ 0 > [ 0.177874] ACPI: PCI: Interrupt link LNKC configured for IRQ 0 > [ 0.177982] ACPI: PCI: Interrupt link LNKD configured for IRQ 0 > [ 0.178109] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 > [ 0.178205] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 > [ 0.178300] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 > [ 0.178395] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 > [ 0.178895] iommu: Default domain type: Translated > [ 0.178895] iommu: DMA domain TLB invalidation policy: lazy mode > [ 0.179083] pci 0000:07:00.0: vgaarb: setting as boot VGA device > [ 0.179145] pci 0000:07:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none > [ 0.179217] pci 0000:07:00.0: vgaarb: bridge control possible > [ 0.179278] vgaarb: loaded > [ 0.179405] SCSI subsystem initialized > [ 0.179468] libata version 3.00 loaded. > [ 0.179468] ACPI: bus type USB registered > [ 0.179468] usbcore: registered new interface driver usbfs > [ 0.179468] usbcore: registered new interface driver hub > [ 0.179468] usbcore: registered new device driver usb > [ 0.179468] pps_core: LinuxPPS API ver. 1 registered > [ 0.179480] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti > [ 0.180082] PTP clock support registered > [ 0.180149] EDAC MC: Ver: 3.0.0 > [ 0.180219] Advanced Linux Sound Architecture Driver Initialized. > [ 0.180246] PCI: Using ACPI for IRQ routing > [ 0.185340] PCI: pci_cache_line_size set to 64 bytes > [ 0.185454] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff] > [ 0.185516] e820: reserve RAM buffer [mem 0x09c00000-0x0bffffff] > [ 0.185577] e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff] > [ 0.185639] e820: reserve RAM buffer [mem 0xd4435000-0xd7ffffff] > [ 0.185700] e820: reserve RAM buffer [mem 0xda831000-0xdbffffff] > [ 0.185762] e820: reserve RAM buffer [mem 0xdaa83000-0xdbffffff] > [ 0.185824] e820: reserve RAM buffer [mem 0xde000000-0xdfffffff] > [ 0.185885] e820: reserve RAM buffer [mem 0x41f380000-0x41fffffff] > [ 0.186117] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00) > [ 0.186232] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 > [ 0.186295] hpet0: 3 comparators, 32-bit 14.318180 MHz counter > [ 0.188128] clocksource: Switched to clocksource tsc-early > [ 0.194886] VFS: Disk quotas dquot_6.6.0 > [ 0.194957] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) > [ 0.195090] pnp: PnP ACPI init > [ 0.195257] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved > [ 0.195377] system 00:01: [mem 0xfeb80000-0xfebfffff] could not be reserved > [ 0.195637] system 00:03: [io 0x0300-0x030f] has been reserved > [ 0.195700] system 00:03: [io 0x0230-0x023f] has been reserved > [ 0.195767] system 00:03: [io 0x0290-0x029f] has been reserved > [ 0.196043] pnp 00:04: [dma 0 disabled] > [ 0.196289] system 00:05: [io 0x04d0-0x04d1] has been reserved > [ 0.196352] system 00:05: [io 0x040b] has been reserved > [ 0.196412] system 00:05: [io 0x04d6] has been reserved > [ 0.196473] system 00:05: [io 0x0c00-0x0c01] has been reserved > [ 0.196534] system 00:05: [io 0x0c14] has been reserved > [ 0.196595] system 00:05: [io 0x0c50-0x0c51] has been reserved > [ 0.196658] system 00:05: [io 0x0c52] has been reserved > [ 0.196718] system 00:05: [io 0x0c6c] has been reserved > [ 0.196780] system 00:05: [io 0x0c6f] has been reserved > [ 0.196840] system 00:05: [io 0x0cd0-0x0cd1] has been reserved > [ 0.196901] system 00:05: [io 0x0cd2-0x0cd3] has been reserved > [ 0.196963] system 00:05: [io 0x0cd4-0x0cd5] has been reserved > [ 0.197024] system 00:05: [io 0x0cd6-0x0cd7] has been reserved > [ 0.197085] system 00:05: [io 0x0cd8-0x0cdf] has been reserved > [ 0.197146] system 00:05: [io 0x0800-0x089f] has been reserved > [ 0.197208] system 00:05: [io 0x0b00-0x0b0f] has been reserved > [ 0.197269] system 00:05: [io 0x0b20-0x0b3f] has been reserved > [ 0.197330] system 00:05: [io 0x0900-0x090f] has been reserved > [ 0.197391] system 00:05: [io 0x0910-0x091f] has been reserved > [ 0.197453] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved > [ 0.197517] system 00:05: [mem 0xfec01000-0xfec01fff] could not be reserved > [ 0.197581] system 00:05: [mem 0xfedc0000-0xfedc0fff] has been reserved > [ 0.197644] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved > [ 0.197708] system 00:05: [mem 0xfed80000-0xfed8ffff] could not be reserved > [ 0.197773] system 00:05: [mem 0xfec10000-0xfec10fff] has been reserved > [ 0.197836] system 00:05: [mem 0xff000000-0xffffffff] has been reserved > [ 0.198257] pnp: PnP ACPI: found 6 devices > [ 0.203984] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns > [ 0.204111] NET: Registered PF_INET protocol family > [ 0.204379] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) > [ 0.206105] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear) > [ 0.206193] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) > [ 0.206397] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) > [ 0.206581] TCP: Hash tables configured (established 131072 bind 65536) > [ 0.206734] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear) > [ 0.206856] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear) > [ 0.206945] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear) > [ 0.207077] NET: Registered PF_UNIX/PF_LOCAL protocol family > [ 0.207217] RPC: Registered named UNIX socket transport module. > [ 0.207279] RPC: Registered udp transport module. > [ 0.207338] RPC: Registered tcp transport module. > [ 0.207397] RPC: Registered tcp NFSv4.1 backchannel transport module. > [ 0.207572] NET: Registered PF_XDP protocol family > [ 0.207643] pci 0000:02:00.0: PCI bridge to [bus 03] > [ 0.207704] pci 0000:02:00.0: bridge window [io 0xf000-0xffff] > [ 0.207773] pci 0000:02:00.0: bridge window [mem 0xfe600000-0xfe6fffff] > [ 0.207843] pci 0000:04:00.0: PCI bridge to [bus 05] > [ 0.207921] pci 0000:02:01.0: PCI bridge to [bus 04-05] > [ 0.207990] pci 0000:02:04.0: PCI bridge to [bus 06] > [ 0.208057] pci 0000:01:00.2: PCI bridge to [bus 02-06] > [ 0.208118] pci 0000:01:00.2: bridge window [io 0xf000-0xffff] > [ 0.208182] pci 0000:01:00.2: bridge window [mem 0xfe600000-0xfe6fffff] > [ 0.208251] pci 0000:00:01.3: PCI bridge to [bus 01-06] > [ 0.208312] pci 0000:00:01.3: bridge window [io 0xf000-0xffff] > [ 0.208375] pci 0000:00:01.3: bridge window [mem 0xfe600000-0xfe7fffff] > [ 0.208442] pci 0000:00:03.1: PCI bridge to [bus 07] > [ 0.208502] pci 0000:00:03.1: bridge window [io 0xe000-0xefff] > [ 0.208566] pci 0000:00:03.1: bridge window [mem 0xfe900000-0xfe9fffff] > [ 0.208630] pci 0000:00:03.1: bridge window [mem 0xe0000000-0xf01fffff 64bit pref] > [ 0.208701] pci 0000:00:07.1: PCI bridge to [bus 08] > [ 0.208763] pci 0000:00:07.1: bridge window [mem 0xfe300000-0xfe5fffff] > [ 0.208830] pci 0000:00:08.1: PCI bridge to [bus 09] > [ 0.208891] pci 0000:00:08.1: bridge window [mem 0xfe800000-0xfe8fffff] > [ 0.208957] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] > [ 0.209020] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] > [ 0.209083] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] > [ 0.209145] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] > [ 0.209207] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window] > [ 0.209271] pci_bus 0000:00: resource 9 [mem 0xe0000000-0xfec2ffff window] > [ 0.209335] pci_bus 0000:00: resource 10 [mem 0xfee00000-0xffffffff window] > [ 0.209399] pci_bus 0000:01: resource 0 [io 0xf000-0xffff] > [ 0.209460] pci_bus 0000:01: resource 1 [mem 0xfe600000-0xfe7fffff] > [ 0.209522] pci_bus 0000:02: resource 0 [io 0xf000-0xffff] > [ 0.209583] pci_bus 0000:02: resource 1 [mem 0xfe600000-0xfe6fffff] > [ 0.209645] pci_bus 0000:03: resource 0 [io 0xf000-0xffff] > [ 0.209706] pci_bus 0000:03: resource 1 [mem 0xfe600000-0xfe6fffff] > [ 0.209770] pci_bus 0000:07: resource 0 [io 0xe000-0xefff] > [ 0.209831] pci_bus 0000:07: resource 1 [mem 0xfe900000-0xfe9fffff] > [ 0.209893] pci_bus 0000:07: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref] > [ 0.209961] pci_bus 0000:08: resource 1 [mem 0xfe300000-0xfe5fffff] > [ 0.210024] pci_bus 0000:09: resource 1 [mem 0xfe800000-0xfe8fffff] > [ 0.210252] pci 0000:04:00.0: Disabling ASPM L0s/L1 > [ 0.210332] pci 0000:07:00.1: D0 power state depends on 0000:07:00.0 > [ 0.210539] PCI: CLS 64 bytes, default 64 > [ 0.210604] pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported > [ 0.210697] pci 0000:00:01.0: Adding to iommu group 0 > [ 0.210769] pci 0000:00:01.3: Adding to iommu group 1 > [ 0.210839] pci 0000:00:02.0: Adding to iommu group 2 > [ 0.210908] pci 0000:00:03.0: Adding to iommu group 3 > [ 0.210974] pci 0000:00:03.1: Adding to iommu group 4 > [ 0.211043] pci 0000:00:04.0: Adding to iommu group 5 > [ 0.211112] pci 0000:00:07.0: Adding to iommu group 6 > [ 0.211179] pci 0000:00:07.1: Adding to iommu group 7 > [ 0.211248] pci 0000:00:08.0: Adding to iommu group 8 > [ 0.211314] pci 0000:00:08.1: Adding to iommu group 9 > [ 0.211386] pci 0000:00:14.0: Adding to iommu group 10 > [ 0.211454] pci 0000:00:14.3: Adding to iommu group 10 > [ 0.211541] pci 0000:00:18.0: Adding to iommu group 11 > [ 0.211606] pci 0000:00:18.1: Adding to iommu group 11 > [ 0.211672] pci 0000:00:18.2: Adding to iommu group 11 > [ 0.211740] pci 0000:00:18.3: Adding to iommu group 11 > [ 0.211806] pci 0000:00:18.4: Adding to iommu group 11 > [ 0.211871] pci 0000:00:18.5: Adding to iommu group 11 > [ 0.211937] pci 0000:00:18.6: Adding to iommu group 11 > [ 0.212002] pci 0000:00:18.7: Adding to iommu group 11 > [ 0.212076] pci 0000:01:00.0: Adding to iommu group 12 > [ 0.212143] pci 0000:01:00.1: Adding to iommu group 12 > [ 0.212210] pci 0000:01:00.2: Adding to iommu group 12 > [ 0.212272] pci 0000:02:00.0: Adding to iommu group 12 > [ 0.212335] pci 0000:02:01.0: Adding to iommu group 12 > [ 0.212397] pci 0000:02:04.0: Adding to iommu group 12 > [ 0.212459] pci 0000:03:00.0: Adding to iommu group 12 > [ 0.212520] pci 0000:04:00.0: Adding to iommu group 12 > [ 0.212601] pci 0000:07:00.0: Adding to iommu group 13 > [ 0.212667] pci 0000:07:00.1: Adding to iommu group 13 > [ 0.212735] pci 0000:08:00.0: Adding to iommu group 14 > [ 0.212809] pci 0000:08:00.2: Adding to iommu group 15 > [ 0.212876] pci 0000:08:00.3: Adding to iommu group 16 > [ 0.212943] pci 0000:09:00.0: Adding to iommu group 17 > [ 0.213010] pci 0000:09:00.2: Adding to iommu group 18 > [ 0.213077] pci 0000:09:00.3: Adding to iommu group 19 > [ 0.215179] pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40 > [ 0.215245] AMD-Vi: Extended features (0xf77ef22294ada): PPR NX GT IA GA PC GA_vAPIC > [ 0.215317] AMD-Vi: Interrupt remapping enabled > [ 0.215374] AMD-Vi: Virtual APIC enabled > [ 0.215542] software IO TLB: tearing down default memory pool > [ 0.216734] RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 163840 ms ovfl timer > [ 0.216805] RAPL PMU: hw unit of domain package 2^-16 Joules > [ 0.216869] amd_uncore: 4 amd_df counters detected > [ 0.216930] amd_uncore: 6 amd_l3 counters detected > [ 0.217132] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank). > [ 0.217293] SVM: TSC scaling supported > [ 0.217350] kvm: Nested Virtualization enabled > [ 0.217407] SVM: kvm: Nested Paging enabled > [ 0.217466] SEV supported: 16 ASIDs > [ 0.217533] SVM: Virtual VMLOAD VMSAVE supported > [ 0.217591] SVM: Virtual GIF supported > [ 0.217647] SVM: LBR virtualization supported > [ 0.223424] Initialise system trusted keyrings > [ 0.223490] Key type blacklist registered > [ 0.223579] workingset: timestamp_bits=40 max_order=22 bucket_order=0 > [ 0.224570] zbud: loaded > [ 0.226585] NFS: Registering the id_resolver key type > [ 0.226648] Key type id_resolver registered > [ 0.226706] Key type id_legacy registered > [ 0.226777] nfs4filelayout_init: NFSv4 File Layout Driver Registering... > [ 0.226842] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... > [ 0.226913] romfs: ROMFS MTD (C) 2007 Red Hat, Inc. > [ 0.226980] fuse: init (API version 7.36) > [ 0.236082] xor: automatically using best checksumming function avx > [ 0.236147] async_tx: api initialized (async) > [ 0.236205] Key type asymmetric registered > [ 0.236263] Asymmetric key parser 'x509' registered > [ 0.236562] alg: self-tests for CTR-KDF (hmac(sha256)) passed > [ 0.236631] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) > [ 0.236727] io scheduler mq-deadline registered > [ 0.236975] atomic64_test: passed for x86-64 platform with CX8 and with SSE > [ 0.238998] pcieport 0000:00:01.3: AER: enabled with IRQ 26 > [ 0.239268] pcieport 0000:00:03.1: AER: enabled with IRQ 27 > [ 0.239533] pcieport 0000:00:07.1: AER: enabled with IRQ 28 > [ 0.240142] pcieport 0000:00:08.1: AER: enabled with IRQ 30 > [ 0.240848] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 > [ 0.240933] ACPI: button: Power Button [PWRB] > [ 0.241022] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 > [ 0.241118] ACPI: button: Power Button [PWRF] > [ 0.241227] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) > [ 0.241299] ACPI: \_PR_.P000: Found 2 idle states > [ 0.241455] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) > [ 0.241525] ACPI: \_PR_.P001: Found 2 idle states > [ 0.241663] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) > [ 0.241735] ACPI: \_PR_.P002: Found 2 idle states > [ 0.241875] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) > [ 0.241947] ACPI: \_PR_.P003: Found 2 idle states > [ 0.242103] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) > [ 0.242175] ACPI: \_PR_.P004: Found 2 idle states > [ 0.242319] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) > [ 0.242393] ACPI: \_PR_.P005: Found 2 idle states > [ 0.242525] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) > [ 0.242597] ACPI: \_PR_.P006: Found 2 idle states > [ 0.242736] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) > [ 0.242806] ACPI: \_PR_.P007: Found 2 idle states > [ 0.242916] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) > [ 0.242983] ACPI: \_PR_.P008: Found 2 idle states > [ 0.243092] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) > [ 0.243160] ACPI: \_PR_.P009: Found 2 idle states > [ 0.243302] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) > [ 0.243371] ACPI: \_PR_.P00A: Found 2 idle states > [ 0.243514] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0) > [ 0.243583] ACPI: \_PR_.P00B: Found 2 idle states > [ 0.244514] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled > [ 0.244648] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A > [ 0.245290] Linux agpgart interface v0.103 > [ 0.245390] AMD-Vi: AMD IOMMUv2 loaded and initialized > [ 0.245527] ACPI: bus type drm_connector registered > [ 0.245593] [drm] amdgpu kernel modesetting enabled. > [ 0.245685] amdgpu: Ignoring ACPI CRAT on non-APU system > [ 0.245749] amdgpu: Virtual CRAT table created for CPU > [ 0.245814] amdgpu: Topology: Add CPU node > [ 0.245917] amdgpu 0000:07:00.0: vgaarb: deactivate vga console > [ 0.247086] Console: switching to colour dummy device 80x25 > [ 0.247155] [drm] initializing kernel modesetting (POLARIS11 0x1002:0x67FF 0x1DA2:0xE348 0xCF). > [ 0.247161] amdgpu 0000:07:00.0: amdgpu: Trusted Memory Zone (TMZ) feature not supported > [ 0.247168] [drm] register mmio base: 0xFE900000 > [ 0.247170] [drm] register mmio size: 262144 > [ 0.247175] [drm] add ip block number 0 > [ 0.247177] [drm] add ip block number 1 > [ 0.247179] [drm] add ip block number 2 > [ 0.247181] [drm] add ip block number 3 > [ 0.247183] [drm] add ip block number 4 > [ 0.247185] [drm] add ip block number 5 > [ 0.247187] [drm] add ip block number 6 > [ 0.247189] [drm] add ip block number 7 > [ 0.247190] [drm] add ip block number 8 > [ 0.247433] amdgpu 0000:07:00.0: No more image in the PCI ROM > [ 0.247451] amdgpu 0000:07:00.0: amdgpu: Fetched VBIOS from ROM BAR > [ 0.247453] amdgpu: ATOM BIOS: 113-34830H2-U02 > [ 0.247466] [drm] UVD is enabled in VM mode > [ 0.247468] [drm] UVD ENC is enabled in VM mode > [ 0.247471] [drm] VCE enabled in VM mode > [ 0.247493] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit > [ 0.247503] amdgpu 0000:07:00.0: amdgpu: VRAM: 2048M 0x000000F400000000 - 0x000000F47FFFFFFF (2048M used) > [ 0.247507] amdgpu 0000:07:00.0: amdgpu: GART: 256M 0x000000FF00000000 - 0x000000FF0FFFFFFF > [ 0.247512] [drm] Detected VRAM RAM=2048M, BAR=256M > [ 0.247514] [drm] RAM width 128bits GDDR5 > [ 0.247540] [drm] amdgpu: 2048M of VRAM memory ready > [ 0.247542] [drm] amdgpu: 3072M of GTT memory ready. > [ 0.247545] [drm] GART: num cpu pages 65536, num gpu pages 65536 > [ 0.249118] [drm] PCIE GART of 256M enabled (table at 0x000000F400900000). > [ 0.249170] [drm] Chained IB support enabled! > [ 0.249842] amdgpu: hwmgr_sw_init smu backed is polaris10_smu > [ 0.249853] [drm] Found UVD firmware Version: 1.130 Family ID: 16 > [ 0.250560] [drm] Found VCE firmware Version: 53.26 Binary ID: 3 > [ 0.584088] [drm] Display Core initialized with v3.2.167! > [ 0.625566] [drm] UVD and UVD ENC initialized successfully. > [ 0.726479] [drm] VCE initialized successfully. > [ 0.727221] kfd kfd: amdgpu: Allocated 3969056 bytes on gart > [ 0.727284] amdgpu: SRAT table not found > [ 0.727286] amdgpu: Virtual CRAT table created for GPU > [ 0.727319] amdgpu: Topology: Add dGPU node [0x67ff:0x1002] > [ 0.727323] kfd kfd: amdgpu: added device 1002:67ff > [ 0.727334] amdgpu 0000:07:00.0: amdgpu: SE 2, SH per SE 1, CU per SH 8, active_cu_number 16 > [ 0.731402] amdgpu 0000:07:00.0: amdgpu: Using BACO for runtime pm > [ 0.731589] [drm] Initialized amdgpu 3.44.0 20150101 for 0000:07:00.0 on minor 0 > [ 0.738000] fbcon: amdgpudrmfb (fb0) is primary device > [ 0.801234] Console: switching to colour frame buffer device 240x67 > [ 0.818522] amdgpu 0000:07:00.0: [drm] fb0: amdgpudrmfb frame buffer device > [ 0.820399] brd: module loaded > [ 0.821540] loop: module loaded > [ 0.821821] ahci 0000:01:00.1: version 3.0 > [ 0.821981] ahci 0000:01:00.1: SSS flag set, parallel bus scan disabled > [ 0.822049] ahci 0000:01:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0x33 impl SATA mode > [ 0.822090] ahci 0000:01:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst > [ 0.822544] scsi host0: ahci > [ 0.822656] scsi host1: ahci > [ 0.822752] scsi host2: ahci > [ 0.822846] scsi host3: ahci > [ 0.822953] scsi host4: ahci > [ 0.823040] scsi host5: ahci > [ 0.823130] scsi host6: ahci > [ 0.823211] scsi host7: ahci > [ 0.823257] ata1: SATA max UDMA/133 abar m131072@0xfe780000 port 0xfe780100 irq 39 > [ 0.823296] ata2: SATA max UDMA/133 abar m131072@0xfe780000 port 0xfe780180 irq 39 > [ 0.823335] ata3: DUMMY > [ 0.823353] ata4: DUMMY > [ 0.823371] ata5: SATA max UDMA/133 abar m131072@0xfe780000 port 0xfe780300 irq 39 > [ 0.823409] ata6: SATA max UDMA/133 abar m131072@0xfe780000 port 0xfe780380 irq 39 > [ 0.823446] ata7: DUMMY > [ 0.823464] ata8: DUMMY > [ 0.823741] ahci 0000:09:00.2: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0xc impl SATA mode > [ 0.823792] ahci 0000:09:00.2: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part > [ 0.824063] scsi host8: ahci > [ 0.824156] scsi host9: ahci > [ 0.824250] scsi host10: ahci > [ 0.824342] scsi host11: ahci > [ 0.824390] ata9: DUMMY > [ 0.824408] ata10: DUMMY > [ 0.824427] ata11: SATA max UDMA/133 abar m4096@0xfe808000 port 0xfe808200 irq 43 > [ 0.824465] ata12: SATA max UDMA/133 abar m4096@0xfe808000 port 0xfe808280 irq 44 > [ 0.825089] scsi host12: pata_legacy > [ 0.825136] ata13: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14 > [ 1.240093] tsc: Refined TSC clocksource calibration: 3193.999 MHz > [ 1.240762] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e0a24cf65f, max_idle_ns: 440795271781 ns > [ 1.241397] clocksource: Switched to clocksource tsc > [ 1.288105] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > [ 1.288107] ata11: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > [ 1.289466] ata12: SATA link up 1.5 Gbps (SStatus 113 SControl 300) > [ 1.290548] ata1.00: ATA-8: ST3500320AS, SD1A, max UDMA/133 > [ 1.290575] ata11.00: ATA-8: ST31000528AS, CC49, max UDMA/133 > [ 1.291243] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) > [ 1.291880] ata11.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32) > [ 1.293188] ata12.00: ATAPI: HL-DT-ST DVDRAM GH24NSD1, LG00, max UDMA/133 > [ 1.294515] ata1.00: configured for UDMA/133 > [ 1.295146] ata12.00: configured for UDMA/133 > [ 1.303017] ata11.00: configured for UDMA/133 > [ 3.864112] floppy0: no floppy controllers found > [ 3.865013] scsi 0:0:0:0: Direct-Access ATA ST3500320AS SD1A PQ: 0 ANSI: 5 > [ 3.865983] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) > [ 3.866790] sd 0:0:0:0: [sda] Write Protect is off > [ 3.867528] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > [ 3.868476] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > [ 3.921071] sda: sda1 sda2 < sda5 sda6 > > [ 3.931203] sd 0:0:0:0: [sda] Attached SCSI disk > [ 4.328095] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > [ 4.332558] ata2.00: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133 > [ 4.333569] ata2.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 32), AA > [ 4.338662] ata2.00: configured for UDMA/133 > [ 4.339551] scsi 1:0:0:0: Direct-Access ATA WDC WD15EADS-00P 0A01 PQ: 0 ANSI: 5 > [ 4.340516] sd 1:0:0:0: [sdb] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB) > [ 4.341233] sd 1:0:0:0: [sdb] Write Protect is off > [ 4.341918] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 > [ 4.342592] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > [ 4.373244] sdb: sdb1 > [ 4.380207] sd 1:0:0:0: [sdb] Attached SCSI disk > [ 4.800095] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) > [ 4.802255] ata5.00: ATA-8: ST3500320AS, SD1A, max UDMA/133 > [ 4.802874] ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) > [ 4.805347] ata5.00: configured for UDMA/133 > [ 4.806061] scsi 4:0:0:0: Direct-Access ATA ST3500320AS SD1A PQ: 0 ANSI: 5 > [ 4.807119] sd 4:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/466 GiB) > [ 4.807940] sd 4:0:0:0: [sdc] Write Protect is off > [ 4.808828] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00 > [ 4.809551] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > [ 4.855096] sdc: sdc1 sdc2 < sdc5 > > [ 4.861151] sd 4:0:0:0: [sdc] Attached SCSI disk > [ 5.272095] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) > [ 5.273632] ata6.00: ATA-8: ST2000DL003-9VT166, CC32, max UDMA/133 > [ 5.274448] ata6.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32) > [ 5.275990] ata6.00: configured for UDMA/133 > [ 5.276938] scsi 5:0:0:0: Direct-Access ATA ST2000DL003-9VT1 CC32 PQ: 0 ANSI: 5 > [ 5.277900] sd 5:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) > [ 5.278020] scsi 10:0:0:0: Direct-Access ATA ST31000528AS CC49 PQ: 0 ANSI: 5 > [ 5.278815] sd 5:0:0:0: [sdd] Write Protect is off > [ 5.279766] sd 10:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) > [ 5.280440] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00 > [ 5.281287] sd 10:0:0:0: [sde] Write Protect is off > [ 5.282137] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > [ 5.282143] scsi 11:0:0:0: CD-ROM HL-DT-ST DVDRAM GH24NSD1 LG00 PQ: 0 ANSI: 5 > [ 5.282944] sd 10:0:0:0: [sde] Mode Sense: 00 3a 00 00 > [ 5.285477] sd 10:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > [ 5.319446] sde: sde1 > [ 5.321274] sr 11:0:0:0: [sr0] scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray > [ 5.322253] cdrom: Uniform CD-ROM driver Revision: 3.20 > [ 5.327151] sd 10:0:0:0: [sde] Attached SCSI disk > [ 5.339732] sdd: sdd1 > [ 5.340795] sr 11:0:0:0: Attached scsi CD-ROM sr0 > [ 5.346152] sd 5:0:0:0: [sdd] Attached SCSI disk > [ 5.347660] scsi host12: pata_legacy > [ 5.348572] ata14: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15 > [ 5.517647] r8169 0000:03:00.0 eth0: RTL8168h/8111h, 10:7b:44:50:35:01, XID 541, IRQ 57 > [ 5.518509] r8169 0000:03:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] > [ 5.519356] usbcore: registered new interface driver rt73usb > [ 5.520303] xhci_hcd 0000:01:00.0: xHCI Host Controller > [ 5.521733] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 > [ 5.578449] xhci_hcd 0000:01:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000010048000410 > [ 5.579434] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.17 > [ 5.580774] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > [ 5.582091] usb usb1: Product: xHCI Host Controller > [ 5.583379] usb usb1: Manufacturer: Linux 5.17.1+ xhci-hcd > [ 5.584642] usb usb1: SerialNumber: 0000:01:00.0 > [ 5.586025] hub 1-0:1.0: USB hub found > [ 5.587404] hub 1-0:1.0: 10 ports detected > [ 5.593440] xhci_hcd 0000:01:00.0: xHCI Host Controller > [ 5.594386] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 > [ 5.595796] xhci_hcd 0000:01:00.0: Host supports USB 3.1 Enhanced SuperSpeed > [ 5.597566] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. > [ 5.598533] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.17 > [ 5.599422] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > [ 5.600276] usb usb2: Product: xHCI Host Controller > [ 5.601064] usb usb2: Manufacturer: Linux 5.17.1+ xhci-hcd > [ 5.601865] usb usb2: SerialNumber: 0000:01:00.0 > [ 5.602725] hub 2-0:1.0: USB hub found > [ 5.603578] hub 2-0:1.0: 4 ports detected > [ 5.606340] xhci_hcd 0000:08:00.3: xHCI Host Controller > [ 5.607395] xhci_hcd 0000:08:00.3: new USB bus registered, assigned bus number 3 > [ 5.608881] xhci_hcd 0000:08:00.3: hcc params 0x0270f665 hci version 0x100 quirks 0x0000000040000410 > [ 5.610225] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.17 > [ 5.611456] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > [ 5.612679] usb usb3: Product: xHCI Host Controller > [ 5.614045] usb usb3: Manufacturer: Linux 5.17.1+ xhci-hcd > [ 5.615261] usb usb3: SerialNumber: 0000:08:00.3 > [ 5.616688] hub 3-0:1.0: USB hub found > [ 5.617971] hub 3-0:1.0: 4 ports detected > [ 5.619434] xhci_hcd 0000:08:00.3: xHCI Host Controller > [ 5.620742] xhci_hcd 0000:08:00.3: new USB bus registered, assigned bus number 4 > [ 5.621911] xhci_hcd 0000:08:00.3: Host supports USB 3.0 SuperSpeed > [ 5.623198] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. > [ 5.624521] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.17 > [ 5.625740] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > [ 5.626930] usb usb4: Product: xHCI Host Controller > [ 5.628118] usb usb4: Manufacturer: Linux 5.17.1+ xhci-hcd > [ 5.629308] usb usb4: SerialNumber: 0000:08:00.3 > [ 5.630574] hub 4-0:1.0: USB hub found > [ 5.631791] hub 4-0:1.0: 4 ports detected > [ 5.633247] i8042: PNP: No PS/2 controller found. > [ 5.634529] mousedev: PS/2 mouse device common for all mice > [ 5.635790] rtc_cmos 00:02: RTC can wake from S4 > [ 5.637424] rtc_cmos 00:02: registered as rtc0 > [ 5.638586] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs > [ 5.639795] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 > [ 5.641050] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection > [ 5.642281] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 > [ 5.648376] device-mapper: uevent: version 1.0.3 > [ 5.649445] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com > [ 5.650726] ccp 0000:08:00.2: ccp enabled > [ 5.651476] hid: raw HID events driver (C) Jiri Kosina > [ 5.652226] usbcore: registered new interface driver usbhid > [ 5.652984] usbhid: USB HID core driver > [ 5.653704] asus_wmi: ASUS WMI generic driver loaded > [ 5.654615] asus_wmi: Initialization: 0x0 > [ 5.655296] asus_wmi: BIOS WMI version: 0.9 > [ 5.656083] asus_wmi: SFUN value: 0x0 > [ 5.656822] eeepc-wmi eeepc-wmi: Detected ASUSWMI, use DCTS > [ 5.657930] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input2 > [ 5.659946] intel_rapl_common: Found RAPL domain package > [ 5.660778] intel_rapl_common: Found RAPL domain core > [ 5.662128] snd_hda_intel 0000:07:00.1: Force to non-snoop mode > [ 5.663631] Initializing XFRM netlink socket > [ 5.664431] NET: Registered PF_INET6 protocol family > [ 5.666018] Segment Routing with IPv6 > [ 5.666776] RPL Segment Routing with IPv6 > [ 5.667562] In-situ OAM (IOAM) with IPv6 > [ 5.668413] NET: Registered PF_PACKET protocol family > [ 5.669313] snd_hda_intel 0000:07:00.1: bound 0000:07:00.0 (ops amdgpu_dm_audio_component_bind_ops) > [ 5.670195] 8021q: 802.1Q VLAN Support v1.8 > [ 5.671035] Key type dns_resolver registered > [ 5.671306] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:07:00.1/sound/card0/input3 > [ 5.672820] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:07:00.1/sound/card0/input4 > [ 5.672975] microcode: CPU0: patch_level=0x08001137 > [ 5.673715] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:07:00.1/sound/card0/input5 > [ 5.674409] microcode: CPU1: patch_level=0x08001137 > [ 5.675430] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:07:00.1/sound/card0/input6 > [ 5.676258] microcode: CPU2: patch_level=0x08001137 > [ 5.677313] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.1/0000:07:00.1/sound/card0/input7 > [ 5.678042] microcode: CPU3: patch_level=0x08001137 > [ 5.679969] microcode: CPU4: patch_level=0x08001137 > [ 5.680851] microcode: CPU5: patch_level=0x08001137 > [ 5.681773] microcode: CPU6: patch_level=0x08001137 > [ 5.682979] microcode: CPU7: patch_level=0x08001137 > [ 5.683159] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line > [ 5.683709] microcode: CPU8: patch_level=0x08001137 > [ 5.684500] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) > [ 5.685298] microcode: CPU9: patch_level=0x08001137 > [ 5.686180] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) > [ 5.687178] microcode: CPU10: patch_level=0x08001137 > [ 5.687878] microcode: CPU11: patch_level=0x08001137 > [ 5.688803] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 > [ 5.689663] microcode: Microcode Update Driver: v2.2. > [ 5.690566] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x11/0x0 > [ 5.690567] snd_hda_codec_realtek hdaudioC1D0: inputs: > [ 5.690569] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19 > [ 5.691500] IPI shorthand broadcast: enabled > [ 5.692303] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18 > [ 5.693215] AVX2 version of gcm_enc/dec engaged. > [ 5.694117] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a > [ 5.697749] AES CTR mode by8 optimization enabled > [ 5.698892] sched_clock: Marking stable (5705804000, -6920351)->(5737799777, -38916128) > [ 5.700185] registered taskstats version 1 > [ 5.700999] Loading compiled-in X.509 certificates > [ 5.701955] zswap: loaded using pool lzo/zbud > [ 5.704552] Key type ._fscrypt registered > [ 5.705325] Key type .fscrypt registered > [ 5.706424] Key type fscrypt-provisioning registered > [ 5.708605] Key type encrypted registered > [ 5.711238] netpoll: netconsole: local port 6666 > [ 5.712117] netpoll: netconsole: local IPv4 address 192.168.1.99 > [ 5.712898] netpoll: netconsole: interface 'wlan0' > [ 5.713641] netpoll: netconsole: remote port 6666 > [ 5.714406] netpoll: netconsole: remote IPv4 address 192.168.1.98 > [ 5.715906] netpoll: netconsole: wlan0 doesn't exist, aborting > [ 5.716626] netconsole: cleaning up > [ 5.716830] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:09:00.3/sound/card1/input8 > [ 5.718705] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:09:00.3/sound/card1/input9 > [ 5.719952] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:09:00.3/sound/card1/input10 > [ 5.719956] acpi_cpufreq: overriding BIOS provided _PSD data > [ 5.721231] input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:08.1/0000:09:00.3/sound/card1/input11 > [ 5.723354] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:09:00.3/sound/card1/input12 > [ 5.723365] RAS: Correctable Errors collector initialized. > [ 5.725472] cfg80211: Loading compiled-in X.509 certificates for regulatory database > [ 5.726744] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' > [ 5.727680] ALSA device list: > [ 5.728490] #0: HDA ATI HDMI at 0xfe960000 irq 65 > [ 5.729338] #1: HD-Audio Generic at 0xfe800000 irq 67 > [ 5.730258] md: Waiting for all devices to be available before autodetect > [ 5.731069] md: If you don't use raid, use raid=noautodetect > [ 5.731906] md: Autodetecting RAID arrays. > [ 5.732788] md: autorun ... > [ 5.733570] md: ... autorun DONE. > [ 5.734778] EXT4-fs (sda6): mounting ext3 file system using the ext4 subsystem > [ 5.858098] usb 3-1: new low-speed USB device number 2 using xhci_hcd > [ 5.944216] EXT4-fs (sda6): mounted filesystem with ordered data mode. Quota mode: none. > [ 5.947142] VFS: Mounted root (ext3 filesystem) readonly on device 8:6. > [ 5.974400] devtmpfs: mounted > [ 5.979063] Freeing unused decrypted memory: 2036K > [ 5.981577] Freeing unused kernel image (initmem) memory: 1884K > [ 5.984103] Write protecting the kernel read-only data: 34816k > [ 5.987251] Freeing unused kernel image (text/rodata gap) memory: 2032K > [ 5.989400] Freeing unused kernel image (rodata/data gap) memory: 848K > [ 5.991963] rodata_test: all tests were successful > [ 5.993655] Run /sbin/init as init process > [ 5.995954] with arguments: > [ 5.997654] /sbin/init > [ 5.999870] with environment: > [ 6.002164] HOME=/ > [ 6.002969] TERM=linux > [ 6.003676] BOOT_IMAGE=bzImage > [ 6.023412] usb 3-1: New USB device found, idVendor=046d, idProduct=c216, bcdDevice= 3.00 > [ 6.024229] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 > [ 6.024908] usb 3-1: Product: Logitech Dual Action > [ 6.025617] usb 3-1: Manufacturer: Logitech > [ 6.067477] input: Logitech Logitech Dual Action as /devices/pci0000:00/0000:00:07.1/0000:08:00.3/usb3/3-1/3-1:1.0/0003:046D:C216.0001/input/input13 > [ 6.069603] logitech 0003:046D:C216.0001: input,hidraw0: USB HID v1.10 Joystick [Logitech Logitech Dual Action] on usb-0000:08:00.3-1/input0 > [ 6.185112] usb 3-2: new low-speed USB device number 3 using xhci_hcd > [ 6.350343] usb 3-2: New USB device found, idVendor=03f0, idProduct=2a41, bcdDevice= 1.00 > [ 6.352037] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 > [ 6.353816] usb 3-2: Product: HP 1000 USB Optical Mouse > [ 6.355470] usb 3-2: Manufacturer: PixArt > [ 6.386800] input: PixArt HP 1000 USB Optical Mouse as /devices/pci0000:00/0000:00:07.1/0000:08:00.3/usb3/3-2/3-2:1.0/0003:03F0:2A41.0002/input/input14 > [ 6.390166] hid-generic 0003:03F0:2A41.0002: input,hidraw1: USB HID v1.11 Mouse [PixArt HP 1000 USB Optical Mouse] on usb-0000:08:00.3-2/input0 > [ 6.507115] usb 3-3: new low-speed USB device number 4 using xhci_hcd > [ 6.659353] usb 3-3: New USB device found, idVendor=0b38, idProduct=0010, bcdDevice= 1.02 > [ 6.661305] usb 3-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 > [ 6.699697] input: HID 0b38:0010 as /devices/pci0000:00/0000:00:07.1/0000:08:00.3/usb3/3-3/3-3:1.0/0003:0B38:0010.0003/input/input15 > [ 6.753282] hid-generic 0003:0B38:0010.0003: input,hidraw2: USB HID v1.10 Keyboard [HID 0b38:0010] on usb-0000:08:00.3-3/input0 > [ 6.766784] input: HID 0b38:0010 System Control as /devices/pci0000:00/0000:00:07.1/0000:08:00.3/usb3/3-3/3-3:1.1/0003:0B38:0010.0004/input/input16 > [ 6.820258] input: HID 0b38:0010 Consumer Control as /devices/pci0000:00/0000:00:07.1/0000:08:00.3/usb3/3-3/3-3:1.1/0003:0B38:0010.0004/input/input17 > [ 6.823973] hid-generic 0003:0B38:0010.0004: input,hidraw3: USB HID v1.10 Device [HID 0b38:0010] on usb-0000:08:00.3-3/input1 > [ 6.941116] usb 3-4: new high-speed USB device number 5 using xhci_hcd > [ 7.213497] usb 3-4: New USB device found, idVendor=07d1, idProduct=3c03, bcdDevice= 0.01 > [ 7.215764] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 > [ 7.217995] usb 3-4: Product: 802.11 bg WLAN > [ 7.220212] usb 3-4: Manufacturer: Ralink > [ 7.338224] usb 3-4: reset high-speed USB device number 5 using xhci_hcd > [ 7.800095] ieee80211 phy0: rt2x00_set_chip: Info - Chipset detected - rt: 2573, rf: 0002, rev: 000a > [ 7.803985] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' > [ 14.167117] udevd[361]: starting eudev-3.2.11 > [ 14.454091] udevd[391]: could not find module by name='rtc_cmos' > [ 16.614867] r8169 0000:03:00.0 eth126: renamed from eth0 > [ 16.631390] r8169 0000:03:00.0 eth1: renamed from eth126 > [ 19.910357] Adding 1228936k swap on /dev/sda5. Priority:-2 extents:1 across:1228936k FS > [ 21.038918] EXT4-fs (sda6): re-mounted. Quota mode: none. > [ 30.373581] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt73.bin' > [ 30.373589] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 1.7 > [ 46.104109] Generic FE-GE Realtek PHY r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC) > [ 46.268209] r8169 0000:03:00.0 eth1: Link is Down > [ 62.603310] wlan0: authenticate with e0:60:66:f0:2f:93 > [ 62.621465] wlan0: send auth to e0:60:66:f0:2f:93 (try 1/3) > [ 62.623074] wlan0: authenticated > [ 62.624182] wlan0: associate with e0:60:66:f0:2f:93 (try 1/3) > [ 62.627562] wlan0: RX AssocResp from e0:60:66:f0:2f:93 (capab=0x1411 status=0 aid=2) > [ 62.633584] wlan0: associated > [ 62.685750] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by e0:60:66:f0:2f:93 > [ 62.754379] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready > [ 68.089561] EXT4-fs (sdd1): mounted filesystem with ordered data mode. Quota mode: none. > [ 68.299787] EXT4-fs (sde1): mounted filesystem with ordered data mode. Quota mode: none. > [ 166.136768] amdgpu: > last message was failed ret is 65535 > [ 166.136774] amdgpu: > failed to send message 145 ret is 65535 > [ 166.136778] amdgpu: > last message was failed ret is 65535 > [ 166.136789] amdgpu: > failed to send message 146 ret is 65535 > [ 166.136794] amdgpu: > last message was failed ret is 65535 > [ 166.136800] amdgpu: > failed to send message 306 ret is 65535 > [ 166.136804] amdgpu: > last message was failed ret is 65535 > [ 166.136811] amdgpu: > failed to send message 5e ret is 65535 > [ 166.136818] amdgpu: > last message was failed ret is 65535 > [ 166.136825] amdgpu: > failed to send message 148 ret is 65535 > [ 166.136833] amdgpu: > last message was failed ret is 65535 > [ 166.136839] amdgpu: > failed to send message 145 ret is 65535 > [ 166.136847] amdgpu: > last message was failed ret is 65535 > [ 166.136853] amdgpu: > failed to send message 146 ret is 65535 > [ 186.139887] [drm:atom_op_jump] *ERROR* atombios stuck in loop for more than 20secs aborting > [ 186.139892] [drm:amdgpu_atom_execute_table_locked] *ERROR* atombios stuck executing BFFE (len 62, WS 0, PS 0) @ 0xC01A > [ 186.139894] [drm:amdgpu_atom_execute_table_locked] *ERROR* atombios stuck executing AFDE (len 1272, WS 8, PS 8) @ 0xB246 > [ 186.389536] ------------[ cut here ]------------ > [ 186.389537] WARNING: CPU: 3 PID: 1100 at drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:1189 dc_commit_state+0xa67/0xac0 > [ 186.389542] Modules linked in: > [ 186.389543] CPU: 3 PID: 1100 Comm: gpm Not tainted 5.17.1+ #221 > [ 186.389546] Hardware name: System manufacturer System Product Name/PRIME B350-PLUS, BIOS 4011 04/19/2018 > [ 186.389547] RIP: 0010:dc_commit_state+0xa67/0xac0 > [ 186.389549] Code: c0 74 bf 48 8b 78 08 e8 67 b2 e9 ff eb b4 be 03 00 00 00 e8 6b 43 ab ff e9 3f f8 ff ff 80 b8 80 03 00 00 00 0f 84 d5 fd ff ff <0f> 0b e9 ce fd ff ff 48 89 ef e8 0a d0 00 00 48 89 ef e8 e2 8a 77 > [ 186.389551] RSP: 0018:ffffb369c209f798 EFLAGS: 00010202 > [ 186.389552] RAX: ffff941ec84e8c00 RBX: ffff941ee69e01e8 RCX: 0000000000000003 > [ 186.389554] RDX: 0000000000001220 RSI: 0000000000000c7a RDI: 0000009ac0011080 > [ 186.389555] RBP: 0000000000000000 R08: ffffb369c209f764 R09: 0000000000000465 > [ 186.389556] R10: 0000000000000000 R11: 0000000000001a60 R12: ffff941ee69e0000 > [ 186.389556] R13: ffff941ee69e3218 R14: 0000000000000001 R15: ffff941ec3e90000 > [ 186.389557] FS: 00007fb3e6356740(0000) GS:ffff9421cecc0000(0000) knlGS:0000000000000000 > [ 186.389559] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > [ 186.389560] CR2: 0000563095fa21a8 CR3: 0000000110514000 CR4: 00000000003506e0 > [ 186.389561] Call Trace: > [ 186.389562] > [ 186.389564] amdgpu_dm_atomic_commit_tail+0x55c/0x2690 > [ 186.389568] ? ttm_bo_move_memcpy+0x140/0x210 > [ 186.389571] ? amdgpu_bo_get_metadata+0x41/0x80 > [ 186.389574] ? amdgpu_bo_move+0x26c/0x7f0 > [ 186.389575] ? preempt_count_add+0x68/0xa0 > [ 186.389578] ? _raw_spin_lock+0x13/0x30 > [ 186.389581] ? unmap_mapping_pages+0x60/0x130 > [ 186.389583] ? ttm_bo_handle_move_mem+0x8d/0x190 > [ 186.389585] ? ttm_bo_validate+0xc1/0x130 > [ 186.389588] ? dm_plane_helper_prepare_fb+0x211/0x270 > [ 186.389589] ? drm_atomic_helper_setup_commit+0x1c9/0x800 > [ 186.389592] ? preempt_count_add+0x68/0xa0 > [ 186.389593] ? _raw_spin_lock_irq+0x14/0x2f > [ 186.389595] ? _raw_spin_unlock_irq+0x13/0x30 > [ 186.389596] ? wait_for_completion_timeout+0xcd/0x100 > [ 186.389598] ? preempt_count_add+0x68/0xa0 > [ 186.389599] ? _raw_spin_lock_irq+0x14/0x2f > [ 186.389601] commit_tail+0x94/0x120 > [ 186.389603] drm_atomic_helper_commit+0x113/0x140 > [ 186.389604] drm_client_modeset_commit_atomic+0x1e4/0x220 > [ 186.389607] drm_client_modeset_dpms+0x8c/0x210 > [ 186.389609] ? bit_cursor+0x38f/0x5d0 > [ 186.389612] drm_fb_helper_blank+0xf0/0x110 > [ 186.389614] fb_blank+0x57/0xa0 > [ 186.389616] fbcon_blank+0x1d5/0x280 > [ 186.389618] ? preempt_count_add+0x68/0xa0 > [ 186.389619] ? get_nohz_timer_target+0x18/0x1a0 > [ 186.389621] ? lock_timer_base+0x61/0x80 > [ 186.389624] ? preempt_count_add+0x68/0xa0 > [ 186.389625] ? _raw_spin_unlock_irqrestore+0x1b/0x30 > [ 186.389627] ? __mod_timer+0x204/0x3c0 > [ 186.389628] do_unblank_screen+0xaa/0x150 > [ 186.389631] set_selection_kernel+0x42/0x650 > [ 186.389633] set_selection_user+0x41/0x70 > [ 186.389634] tty_ioctl+0x379/0x8a0 > [ 186.389636] ? __do_sys_newfstatat+0x40/0x70 > [ 186.389639] __x64_sys_ioctl+0x82/0xb0 > [ 186.389642] do_syscall_64+0x3b/0x90 > [ 186.389644] entry_SYSCALL_64_after_hwframe+0x44/0xae > [ 186.389646] RIP: 0033:0x7fb3e646b418 > [ 186.389648] Code: 00 00 48 8d 44 24 08 48 89 54 24 e0 48 89 44 24 c0 48 8d 44 24 d0 48 89 44 24 c8 b8 10 00 00 00 c7 44 24 b8 10 00 00 00 0f 05 <41> 89 c0 3d 00 f0 ff ff 77 0e 44 89 c0 c3 66 2e 0f 1f 84 00 00 00 > [ 186.389649] RSP: 002b:00007ffde61f8da8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 > [ 186.389650] RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fb3e646b418 > [ 186.389651] RDX: 00007ffde61f8db5 RSI: 000000000000541c RDI: 0000000000000006 > [ 186.389652] RBP: 0000000000000006 R08: 00000000000000fd R09: 0000000000000003 > [ 186.389653] R10: 0000000000001000 R11: 0000000000000246 R12: 000000000041e000 > [ 186.389653] R13: 000000000041ddc0 R14: 0000000000000001 R15: 0000000000419738 > [ 186.389655] > [ 186.389655] ---[ end trace 0000000000000000 ]--- > [ 186.389791] amdgpu: > last message was failed ret is 65535 > [ 186.389797] amdgpu: > failed to send message 148 ret is 65535 > [ 186.389802] amdgpu: > last message was failed ret is 65535 > [ 186.389808] amdgpu: > failed to send message 145 ret is 65535 > [ 186.389816] amdgpu: > last message was failed ret is 65535 > [ 186.389822] amdgpu: > failed to send message 146 ret is 65535 > > > ------- > > decoded stacktrace: > [ 186.389536] ------------[ cut here ]------------ > [ 186.389537] WARNING: CPU: 3 PID: 1100 at drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:1189 dc_commit_state+0xa67/0xac0 > [ 186.389542] Modules linked in: > [ 186.389546] Hardware name: System manufacturer System Product Name/PRIME B350-PLUS, BIOS 4011 04/19/2018 > [ 186.389547] RIP: dc_commit_state+0xa67/0xac0 > [ 186.389549] Code: c0 74 bf 48 8b 78 08 e8 67 b2 e9 ff eb b4 be 03 00 00 00 e8 6b 43 ab ff e9 3f f8 ff ff 80 b8 80 03 00 00 00 0f 84 d5 fd ff ff <0f> 0b e9 ce fd ff ff 48 89 ef e8 0a d0 00 00 48 89 ef e8 e2 8a 77 > All code > ======== > 0: c0 74 bf 48 8b shlb $0x8b,0x48(%rdi,%rdi,4) > 5: 78 08 js 0xf > 7: e8 67 b2 e9 ff call 0xffffffffffe9b273 > c: eb b4 jmp 0xffffffffffffffc2 > e: be 03 00 00 00 mov $0x3,%esi > 13: e8 6b 43 ab ff call 0xffffffffffab4383 > 18: e9 3f f8 ff ff jmp 0xfffffffffffff85c > 1d: 80 b8 80 03 00 00 00 cmpb $0x0,0x380(%rax) > 24: 0f 84 d5 fd ff ff je 0xfffffffffffffdff > 2a:* 0f 0b ud2 <-- trapping instruction > 2c: e9 ce fd ff ff jmp 0xfffffffffffffdff > 31: 48 89 ef mov %rbp,%rdi > 34: e8 0a d0 00 00 call 0xd043 > 39: 48 89 ef mov %rbp,%rdi > 3c: e8 .byte 0xe8 > 3d: e2 8a loop 0xffffffffffffffc9 > 3f: 77 .byte 0x77 > > Code starting with the faulting instruction > =========================================== > 0: 0f 0b ud2 > 2: e9 ce fd ff ff jmp 0xfffffffffffffdd5 > 7: 48 89 ef mov %rbp,%rdi > a: e8 0a d0 00 00 call 0xd019 > f: 48 89 ef mov %rbp,%rdi > 12: e8 .byte 0xe8 > 13: e2 8a loop 0xffffffffffffff9f > 15: 77 .byte 0x77 > [ 186.389551] RSP: 0018:ffffb369c209f798 EFLAGS: 00010202 > [ 186.389552] RAX: ffff941ec84e8c00 RBX: ffff941ee69e01e8 RCX: 0000000000000003 > [ 186.389554] RDX: 0000000000001220 RSI: 0000000000000c7a RDI: 0000009ac0011080 > [ 186.389555] RBP: 0000000000000000 R08: ffffb369c209f764 R09: 0000000000000465 > [ 186.389556] R10: 0000000000000000 R11: 0000000000001a60 R12: ffff941ee69e0000 > [ 186.389556] R13: ffff941ee69e3218 R14: 0000000000000001 R15: ffff941ec3e90000 > [ 186.389557] FS: 00007fb3e6356740(0000) GS:ffff9421cecc0000(0000) knlGS:0000000000000000 > [ 186.389559] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > [ 186.389560] CR2: 0000563095fa21a8 CR3: 0000000110514000 CR4: 00000000003506e0 > [ 186.389561] Call Trace: > [ 186.389562] > [ 186.389564] amdgpu_dm_atomic_commit_tail+0x55c/0x2690 > [ 186.389568] ? ttm_bo_move_memcpy+0x140/0x210 > [ 186.389571] ? amdgpu_bo_get_metadata+0x41/0x80 > [ 186.389574] ? amdgpu_bo_move+0x26c/0x7f0 > [ 186.389575] ? preempt_count_add+0x68/0xa0 > [ 186.389578] ? _raw_spin_lock+0x13/0x30 > [ 186.389581] ? unmap_mapping_pages+0x60/0x130 > [ 186.389583] ? ttm_bo_handle_move_mem+0x8d/0x190 > [ 186.389585] ? ttm_bo_validate+0xc1/0x130 > [ 186.389588] ? dm_plane_helper_prepare_fb+0x211/0x270 > [ 186.389589] ? drm_atomic_helper_setup_commit+0x1c9/0x800 > [ 186.389592] ? preempt_count_add+0x68/0xa0 > [ 186.389593] ? _raw_spin_lock_irq+0x14/0x2f > [ 186.389595] ? _raw_spin_unlock_irq+0x13/0x30 > [ 186.389596] ? wait_for_completion_timeout+0xcd/0x100 > [ 186.389598] ? preempt_count_add+0x68/0xa0 > [ 186.389599] ? _raw_spin_lock_irq+0x14/0x2f > [ 186.389601] commit_tail+0x94/0x120 > [ 186.389603] drm_atomic_helper_commit+0x113/0x140 > [ 186.389604] drm_client_modeset_commit_atomic+0x1e4/0x220 > [ 186.389607] drm_client_modeset_dpms+0x8c/0x210 > [ 186.389609] ? bit_cursor+0x38f/0x5d0 > [ 186.389612] drm_fb_helper_blank+0xf0/0x110 > [ 186.389614] fb_blank+0x57/0xa0 > [ 186.389616] fbcon_blank+0x1d5/0x280 > [ 186.389618] ? preempt_count_add+0x68/0xa0 > [ 186.389619] ? get_nohz_timer_target+0x18/0x1a0 > [ 186.389621] ? lock_timer_base+0x61/0x80 > [ 186.389624] ? preempt_count_add+0x68/0xa0 > [ 186.389625] ? _raw_spin_unlock_irqrestore+0x1b/0x30 > [ 186.389627] ? __mod_timer+0x204/0x3c0 > [ 186.389628] do_unblank_screen+0xaa/0x150 > [ 186.389631] set_selection_kernel+0x42/0x650 > [ 186.389633] set_selection_user+0x41/0x70 > [ 186.389634] tty_ioctl+0x379/0x8a0 > [ 186.389636] ? __do_sys_newfstatat+0x40/0x70 > [ 186.389639] __x64_sys_ioctl+0x82/0xb0 > [ 186.389642] do_syscall_64+0x3b/0x90 > [ 186.389644] entry_SYSCALL_64_after_hwframe+0x44/0xae > [ 186.389646] RIP: 0033:0x7fb3e646b418 > [ 186.389648] Code: 00 00 48 8d 44 24 08 48 89 54 24 e0 48 89 44 24 c0 48 8d 44 24 d0 48 89 44 24 c8 b8 10 00 00 00 c7 44 24 b8 10 00 00 00 0f 05 <41> 89 c0 3d 00 f0 ff ff 77 0e 44 89 c0 c3 66 2e 0f 1f 84 00 00 00 > All code > ======== > 0: 00 00 add %al,(%rax) > 2: 48 8d 44 24 08 lea 0x8(%rsp),%rax > 7: 48 89 54 24 e0 mov %rdx,-0x20(%rsp) > c: 48 89 44 24 c0 mov %rax,-0x40(%rsp) > 11: 48 8d 44 24 d0 lea -0x30(%rsp),%rax > 16: 48 89 44 24 c8 mov %rax,-0x38(%rsp) > 1b: b8 10 00 00 00 mov $0x10,%eax > 20: c7 44 24 b8 10 00 00 movl $0x10,-0x48(%rsp) > 27: 00 > 28: 0f 05 syscall > 2a:* 41 89 c0 mov %eax,%r8d <-- trapping instruction > 2d: 3d 00 f0 ff ff cmp $0xfffff000,%eax > 32: 77 0e ja 0x42 > 34: 44 89 c0 mov %r8d,%eax > 37: c3 ret > 38: 66 data16 > 39: 2e cs > 3a: 0f .byte 0xf > 3b: 1f (bad) > 3c: 84 00 test %al,(%rax) > ... > > Code starting with the faulting instruction > =========================================== > 0: 41 89 c0 mov %eax,%r8d > 3: 3d 00 f0 ff ff cmp $0xfffff000,%eax > 8: 77 0e ja 0x18 > a: 44 89 c0 mov %r8d,%eax > d: c3 ret > e: 66 data16 > f: 2e cs > 10: 0f .byte 0xf > 11: 1f (bad) > 12: 84 00 test %al,(%rax) > ... > [ 186.389649] RSP: 002b:00007ffde61f8da8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 > [ 186.389650] RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fb3e646b418 > [ 186.389651] RDX: 00007ffde61f8db5 RSI: 000000000000541c RDI: 0000000000000006 > [ 186.389652] RBP: 0000000000000006 R08: 00000000000000fd R09: 0000000000000003 > [ 186.389653] R10: 0000000000001000 R11: 0000000000000246 R12: 000000000041e000 > [ 186.389653] R13: 000000000041ddc0 R14: 0000000000000001 R15: 0000000000419738 > [ 186.389655] > [ 186.389655] ---[ end trace 0000000000000000 ]--- > > ------- > > Thanks, > Michele Ballabio