On Sat, Apr 9, 2022 at 12:28 PM Michele Ballabio wrote: > > On Tue, 5 Apr 2022 10:23:16 -0400 > Alex Deucher wrote: > > > On Mon, Apr 4, 2022 at 3:39 PM Michele Ballabio > > wrote: > > > > > > On Mon, 4 Apr 2022 13:03:41 -0400 > > > Alex Deucher wrote: > > > > > > > On Sun, Apr 3, 2022 at 10:19 AM Michele Ballabio > > > > wrote: > > > > > > > > > > Hi, > > > > > I've hit a regression on 5.17.1 (haven't tested 5.17.0, > > > > > but 5.16-stable didn't have this problem). > > > > > > > > > > The machine is a Ryzen 5 1600 with AMD graphics (RX 560). > > > > > > > > > > The regression I hit seems to trigger when the machine is left > > > > > idle at boot (I don't boot straight to X, I boot to a tty, login > > > > > and then start X). The machine after a while blanks the screen. > > > > > Usually, the screen unblanks as the keyboard is hit or the mouse > > > > > moves, but with kernel 5.17.1 the screen does not wake up. The > > > > > machine seems to run mostly fine: I can login from ssh, but I > > > > > cannot reboot or halt it: a sysrq sequence is needed for that. > > > > > Note that if the screen goes blank under X, it wakes up fine. > > > > > > > > > > Below a dmesg and two traces from syslog (they're quite > > > > > similar). > > > > > > > > Can you bisect? Does setting amdgpu.runpm=0 help? > > > > > > I can try to bisect, should I narrow the search to drivers/gpu/drm/ > > > ? > > > > I would just do a full bisect if possible in case the change happens > > to be outside of drm. > > > > > > > > Setting amdgpu.runpm=0 works, the display now unblanks without > > > problems. > > > > Hi, > I bisected this, and the first bad commit is > [087451f372bf76d971184caa258807b7c35aac8f] drm/amdgpu: use generic fb > helpers instead of setting up AMD own's. > > Let me know if you need some more testing. Thanks. Do the attached patches fix the issue? Thanks, Alex