* 3.2.11: PCI Express card cannot be re-detected withing cca 60sec timeframe
@ 2012-03-21 21:29 Martin Mokrejs
2012-03-21 22:29 ` Yinghai Lu
0 siblings, 1 reply; 55+ messages in thread
From: Martin Mokrejs @ 2012-03-21 21:29 UTC (permalink / raw)
To: linux-pci
[-- Attachment #1: Type: text/plain, Size: 2755 bytes --]
Hi,
I am not sure whether this is a bug or feature but I have problems
getting my USB3.0 PCI express card detected in my Dello Vostro 3550 laptop.
It appears to me after removal of the card there is about 60s window when
the PCI INT is still kept (not released). After that time it is released,
no matter that I for example meanwhile re-plugged the card already into
the slot.
After having found this I can confirm that my express card gets detected
if I insert it in after at least 60 seconds since its previous removal.
I have attached the logs from my attempts. Would anybody please confirm
this is the intended behavior? Or is that because USB delay of the PCI INT
resource after cards removal? Could I be, as a user, informed that I am not
supposed to re-insert the card in a whatever time window?
Either way, thank you for comments,
Martin
# lspci
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05)
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5)
00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5)
00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5)
00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b5)
00:1c.7 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 (rev b5)
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05)
00:1f.0 ISA bridge: Intel Corporation HM67 Express Chipset Family LPC Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05)
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
09:00.0 Network controller: Intel Corporation Centrino Wireless-N 1030 (rev 34)
0b:00.0 USB controller: Texas Instruments Device 8241 (rev 02)
11:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03)
#
[-- Attachment #2: 3.2.11.txt --]
[-- Type: text/plain, Size: 20209 bytes --]
Mar 20 21:04:17 vostro kernel: pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
Mar 20 21:04:18 vostro kernel: pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
Mar 20 21:04:19 vostro kernel: pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
Mar 20 21:04:20 vostro kernel: pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
Mar 20 21:04:21 vostro kernel: pci 0000:11:00.0: BAR 0: assigned [mem 0xf6c00000-0xf6c01fff 64bit]
Mar 20 21:04:21 vostro kernel: pci 0000:11:00.0: BAR 0: set to [mem 0xf6c00000-0xf6c01fff 64bit] (PCI address [0xf6c00000-0xf6c01fff])
Mar 20 21:04:21 vostro kernel: pcieport 0000:00:1c.7: PCI bridge to [bus 11-16]
Mar 20 21:04:21 vostro kernel: pcieport 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
Mar 20 21:04:21 vostro kernel: pcieport 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff]
Mar 20 21:04:21 vostro kernel: pcieport 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
Mar 20 21:04:21 vostro kernel: xhci_hcd 0000:11:00.0: enabling device (0100 -> 0102)
Mar 20 21:04:21 vostro kernel: xhci_hcd 0000:11:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
Mar 20 21:04:21 vostro kernel: xhci_hcd 0000:11:00.0: xHCI Host Controller
Mar 20 21:04:21 vostro kernel: xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 5
Mar 20 21:04:21 vostro kernel: xhci_hcd 0000:11:00.0: irq 19, io mem 0xf6c00000
Mar 20 21:04:21 vostro kernel: usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
Mar 20 21:04:21 vostro kernel: usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Mar 20 21:04:21 vostro kernel: usb usb5: Product: xHCI Host Controller
Mar 20 21:04:21 vostro kernel: usb usb5: Manufacturer: Linux 3.2.11-default xhci_hcd
Mar 20 21:04:21 vostro kernel: usb usb5: SerialNumber: 0000:11:00.0
Mar 20 21:04:21 vostro kernel: hub 5-0:1.0: USB hub found
Mar 20 21:04:21 vostro kernel: hub 5-0:1.0: 2 ports detected
Mar 20 21:04:21 vostro kernel: xhci_hcd 0000:11:00.0: xHCI Host Controller
Mar 20 21:04:21 vostro kernel: xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 6
Mar 20 21:04:21 vostro kernel: usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
Mar 20 21:04:21 vostro kernel: usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Mar 20 21:04:21 vostro kernel: usb usb6: Product: xHCI Host Controller
Mar 20 21:04:21 vostro kernel: usb usb6: Manufacturer: Linux 3.2.11-default xhci_hcd
Mar 20 21:04:21 vostro kernel: usb usb6: SerialNumber: 0000:11:00.0
Mar 20 21:04:21 vostro kernel: hub 6-0:1.0: USB hub found
Mar 20 21:04:21 vostro kernel: hub 6-0:1.0: 2 ports detected
Mar 20 21:04:21 vostro kernel: usb 5-2: new low-speed USB device number 2 using xhci_hcd
Mar 20 21:04:21 vostro kernel: xhci_hcd 0000:11:00.0: WARN: short transfer on control ep
Mar 20 21:04:21 vostro last message repeated 2 times
Mar 20 21:04:21 vostro kernel: usb 5-2: New USB device found, idVendor=046d, idProduct=c019
Mar 20 21:04:21 vostro kernel: usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Mar 20 21:04:21 vostro kernel: usb 5-2: Product: Logitech USB Optical Mouse
Mar 20 21:04:21 vostro kernel: usb 5-2: Manufacturer: Logitech
Mar 20 21:04:21 vostro kernel: usb 5-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
Mar 20 21:04:21 vostro kernel: input: Logitech Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1c.7/0000:11:00.0/usb5/5-2/5-2:1.0/input/input18
Mar 20 21:04:21 vostro kernel: generic-usb 0003:046D:C019.0006: input,hidraw0: USB HID v1.11 Mouse [Logitech Logitech USB Optical Mouse] on usb-0000:11:00.0-2/input0
Mar 20 21:05:19 vostro kernel: pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
Mar 20 21:05:20 vostro kernel: xhci_hcd 0000:11:00.0: remove, state 4
Mar 20 21:05:20 vostro kernel: usb usb6: USB disconnect, device number 1
Mar 20 21:05:20 vostro kernel: xhci_hcd 0000:11:00.0: USB bus 6 deregistered
Mar 20 21:05:20 vostro kernel: xhci_hcd 0000:11:00.0: remove, state 1
Mar 20 21:05:20 vostro kernel: usb usb5: USB disconnect, device number 1
Mar 20 21:05:20 vostro kernel: usb 5-2: USB disconnect, device number 2
Mar 20 21:05:23 vostro kernel: pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
Mar 20 21:05:23 vostro kernel: pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
Mar 20 21:05:25 vostro kernel: pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
Mar 20 21:05:29 vostro kernel: pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
Mar 20 21:05:30 vostro kernel: pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
Mar 20 21:05:34 vostro kernel: pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
Mar 20 21:05:34 vostro kernel: pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
Mar 20 21:05:38 vostro kernel: pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
Mar 20 21:05:38 vostro kernel: pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
Mar 20 21:05:38 vostro kernel: pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
Mar 20 21:05:39 vostro kernel: pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
Mar 20 21:05:42 vostro kernel: pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
Mar 20 21:05:42 vostro kernel: pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
Mar 20 21:05:43 vostro kernel: pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
Mar 20 21:05:43 vostro kernel: pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
Mar 20 21:05:48 vostro kernel: pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
Mar 20 21:05:49 vostro kernel: pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
Mar 20 21:05:49 vostro kernel: pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
Mar 20 21:05:49 vostro kernel: pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
Mar 20 21:05:53 vostro kernel: pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
Mar 20 21:05:54 vostro kernel: pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
Mar 20 21:05:54 vostro kernel: pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
Mar 20 21:05:55 vostro kernel: pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
Mar 20 21:06:00 vostro kernel: pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
Mar 20 21:06:01 vostro kernel: pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
Mar 20 21:06:01 vostro kernel: pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
Mar 20 21:06:01 vostro kernel: pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
Mar 20 21:06:05 vostro kernel: pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
Mar 20 21:06:05 vostro kernel: pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
Mar 20 21:06:06 vostro kernel: pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
Mar 20 21:06:06 vostro kernel: pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
Mar 20 21:06:10 vostro kernel: xhci_hcd 0000:11:00.0: Timeout while waiting for configure endpoint command
Mar 20 21:06:10 vostro kernel: xhci_hcd 0000:11:00.0: USB bus 5 deregistered
Mar 20 21:06:10 vostro kernel: xhci_hcd 0000:11:00.0: PCI INT A disabled
Mar 20 21:06:10 vostro kernel: pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
Mar 20 21:06:11 vostro kernel: pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
Mar 20 21:06:11 vostro kernel: pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
Mar 20 21:06:11 vostro kernel: pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
Mar 20 21:06:12 vostro kernel: pci 0000:11:00.0: BAR 0: assigned [mem 0xf6c00000-0xf6c01fff 64bit]
Mar 20 21:06:12 vostro kernel: pci 0000:11:00.0: BAR 0: set to [mem 0xf6c00000-0xf6c01fff 64bit] (PCI address [0xf6c00000-0xf6c01fff])
Mar 20 21:06:12 vostro kernel: pcieport 0000:00:1c.7: PCI bridge to [bus 11-16]
Mar 20 21:06:12 vostro kernel: pcieport 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
Mar 20 21:06:12 vostro kernel: pcieport 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff]
Mar 20 21:06:12 vostro kernel: pcieport 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
Mar 20 21:06:12 vostro kernel: xhci_hcd 0000:11:00.0: enabling device (0100 -> 0102)
Mar 20 21:06:12 vostro kernel: xhci_hcd 0000:11:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
Mar 20 21:06:12 vostro kernel: xhci_hcd 0000:11:00.0: xHCI Host Controller
Mar 20 21:06:12 vostro kernel: xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 5
Mar 20 21:06:12 vostro kernel: xhci_hcd 0000:11:00.0: irq 19, io mem 0xf6c00000
Mar 20 21:06:12 vostro kernel: usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
Mar 20 21:06:12 vostro kernel: usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Mar 20 21:06:12 vostro kernel: usb usb5: Product: xHCI Host Controller
Mar 20 21:06:12 vostro kernel: usb usb5: Manufacturer: Linux 3.2.11-default xhci_hcd
Mar 20 21:06:12 vostro kernel: usb usb5: SerialNumber: 0000:11:00.0
Mar 20 21:06:12 vostro kernel: hub 5-0:1.0: USB hub found
Mar 20 21:06:12 vostro kernel: hub 5-0:1.0: 2 ports detected
Mar 20 21:06:12 vostro kernel: xhci_hcd 0000:11:00.0: xHCI Host Controller
Mar 20 21:06:12 vostro kernel: xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 6
Mar 20 21:06:12 vostro kernel: usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
Mar 20 21:06:12 vostro kernel: usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Mar 20 21:06:12 vostro kernel: usb usb6: Product: xHCI Host Controller
Mar 20 21:06:12 vostro kernel: usb usb6: Manufacturer: Linux 3.2.11-default xhci_hcd
Mar 20 21:06:12 vostro kernel: usb usb6: SerialNumber: 0000:11:00.0
Mar 20 21:06:12 vostro kernel: hub 6-0:1.0: USB hub found
Mar 20 21:06:12 vostro kernel: hub 6-0:1.0: 2 ports detected
Mar 20 21:06:12 vostro kernel: usb 5-2: new low-speed USB device number 2 using xhci_hcd
Mar 20 21:06:12 vostro kernel: xhci_hcd 0000:11:00.0: WARN: short transfer on control ep
Mar 20 21:06:12 vostro last message repeated 2 times
Mar 20 21:06:12 vostro kernel: usb 5-2: New USB device found, idVendor=046d, idProduct=c019
Mar 20 21:06:12 vostro kernel: usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Mar 20 21:06:12 vostro kernel: usb 5-2: Product: Logitech USB Optical Mouse
Mar 20 21:06:12 vostro kernel: usb 5-2: Manufacturer: Logitech
Mar 20 21:06:12 vostro kernel: usb 5-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
Mar 20 21:06:12 vostro kernel: input: Logitech Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1c.7/0000:11:00.0/usb5/5-2/5-2:1.0/input/input19
Mar 20 21:06:12 vostro kernel: generic-usb 0003:046D:C019.0007: input,hidraw0: USB HID v1.11 Mouse [Logitech Logitech USB Optical Mouse] on usb-0000:11:00.0-2/input0
Mar 20 21:10:38 vostro kernel: pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
Mar 20 21:10:38 vostro kernel: xhci_hcd 0000:11:00.0: remove, state 4
Mar 20 21:10:38 vostro kernel: usb usb6: USB disconnect, device number 1
Mar 20 21:10:38 vostro kernel: xhci_hcd 0000:11:00.0: USB bus 6 deregistered
Mar 20 21:10:38 vostro kernel: xhci_hcd 0000:11:00.0: remove, state 1
Mar 20 21:10:38 vostro kernel: usb usb5: USB disconnect, device number 1
Mar 20 21:10:38 vostro kernel: usb 5-2: USB disconnect, device number 2
card removed
Mar 20 21:11:28 vostro kernel: xhci_hcd 0000:11:00.0: Timeout while waiting for configure endpoint command
Mar 20 21:11:28 vostro kernel: xhci_hcd 0000:11:00.0: USB bus 5 deregistered
Mar 20 21:11:28 vostro kernel: xhci_hcd 0000:11:00.0: PCI INT A disabled
why does it wait about 60seconds to disable PCI?
Mar 20 21:11:53 vostro kernel: pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
Mar 20 21:11:53 vostro kernel: pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
Mar 20 21:11:54 vostro kernel: pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
Mar 20 21:11:54 vostro kernel: pci 0000:11:00.0: BAR 0: assigned [mem 0xf6c00000-0xf6c01fff 64bit]
Mar 20 21:11:54 vostro kernel: pci 0000:11:00.0: BAR 0: set to [mem 0xf6c00000-0xf6c01fff 64bit] (PCI address [0xf6c00000-0xf6c01fff])
Mar 20 21:11:54 vostro kernel: pcieport 0000:00:1c.7: PCI bridge to [bus 11-16]
Mar 20 21:11:54 vostro kernel: pcieport 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
Mar 20 21:11:54 vostro kernel: pcieport 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff]
Mar 20 21:11:54 vostro kernel: pcieport 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
Mar 20 21:11:54 vostro kernel: xhci_hcd 0000:11:00.0: enabling device (0100 -> 0102)
Mar 20 21:11:54 vostro kernel: xhci_hcd 0000:11:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
Mar 20 21:11:54 vostro kernel: xhci_hcd 0000:11:00.0: xHCI Host Controller
Mar 20 21:11:54 vostro kernel: xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 5
Mar 20 21:11:54 vostro kernel: xhci_hcd 0000:11:00.0: irq 19, io mem 0xf6c00000
Mar 20 21:11:54 vostro kernel: usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
Mar 20 21:11:54 vostro kernel: usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Mar 20 21:11:54 vostro kernel: usb usb5: Product: xHCI Host Controller
Mar 20 21:11:54 vostro kernel: usb usb5: Manufacturer: Linux 3.2.11-default xhci_hcd
Mar 20 21:11:54 vostro kernel: usb usb5: SerialNumber: 0000:11:00.0
Mar 20 21:11:54 vostro kernel: hub 5-0:1.0: USB hub found
Mar 20 21:11:54 vostro kernel: hub 5-0:1.0: 2 ports detected
Mar 20 21:11:54 vostro kernel: xhci_hcd 0000:11:00.0: xHCI Host Controller
Mar 20 21:11:54 vostro kernel: xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 6
Mar 20 21:11:54 vostro kernel: usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
Mar 20 21:11:54 vostro kernel: usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Mar 20 21:11:54 vostro kernel: usb usb6: Product: xHCI Host Controller
Mar 20 21:11:54 vostro kernel: usb usb6: Manufacturer: Linux 3.2.11-default xhci_hcd
Mar 20 21:11:54 vostro kernel: usb usb6: SerialNumber: 0000:11:00.0
Mar 20 21:11:54 vostro kernel: hub 6-0:1.0: USB hub found
Mar 20 21:11:54 vostro kernel: hub 6-0:1.0: 2 ports detected
Mar 20 21:11:54 vostro kernel: usb 5-2: new low-speed USB device number 2 using xhci_hcd
Mar 20 21:11:54 vostro kernel: xhci_hcd 0000:11:00.0: WARN: short transfer on control ep
Mar 20 21:11:54 vostro last message repeated 2 times
Mar 20 21:11:54 vostro kernel: usb 5-2: New USB device found, idVendor=046d, idProduct=c019
Mar 20 21:11:54 vostro kernel: usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Mar 20 21:11:54 vostro kernel: usb 5-2: Product: Logitech USB Optical Mouse
Mar 20 21:11:54 vostro kernel: usb 5-2: Manufacturer: Logitech
Mar 20 21:11:54 vostro kernel: usb 5-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
Mar 20 21:11:54 vostro kernel: input: Logitech Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1c.7/0000:11:00.0/usb5/5-2/5-2:1.0/input/input20
Mar 20 21:11:54 vostro kernel: generic-usb 0003:046D:C019.0008: input,hidraw0: USB HID v1.11 Mouse [Logitech Logitech USB Optical Mouse] on usb-0000:11:00.0-2/input0
Mar 20 21:13:08 vostro kernel: pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
Mar 20 21:13:08 vostro kernel: xhci_hcd 0000:11:00.0: remove, state 4
Mar 20 21:13:08 vostro kernel: usb usb6: USB disconnect, device number 1
Mar 20 21:13:08 vostro kernel: xhci_hcd 0000:11:00.0: USB bus 6 deregistered
Mar 20 21:13:08 vostro kernel: xhci_hcd 0000:11:00.0: remove, state 1
Mar 20 21:13:08 vostro kernel: usb usb5: USB disconnect, device number 1
Mar 20 21:13:08 vostro kernel: usb 5-2: USB disconnect, device number 2
card removed and re-plugged several times because it was not detected. It was left
plugged in after the 4th attempt.
Mar 20 21:13:13 vostro kernel: pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
Mar 20 21:13:15 vostro kernel: pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
Mar 20 21:13:16 vostro kernel: pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
Mar 20 21:13:18 vostro kernel: pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
Mar 20 21:13:19 vostro kernel: pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
Mar 20 21:13:21 vostro kernel: pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
Mar 20 21:13:21 vostro kernel: pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
Mar 20 21:13:58 vostro kernel: xhci_hcd 0000:11:00.0: Timeout while waiting for configure endpoint command
Mar 20 21:13:58 vostro kernel: xhci_hcd 0000:11:00.0: USB bus 5 deregistered
Mar 20 21:13:58 vostro kernel: xhci_hcd 0000:11:00.0: PCI INT A disabled
Mar 20 21:14:14 vostro kernel: pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
kernel disabled the PCI INT after a 1 minute, not realizing the card is in the slot for almost a minute back again.
Now, on the next attempt system will accept the card immediately upon insertion.
Mar 20 21:14:16 vostro kernel: pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
Mar 20 21:14:17 vostro kernel: pci 0000:11:00.0: BAR 0: assigned [mem 0xf6c00000-0xf6c01fff 64bit]
Mar 20 21:14:17 vostro kernel: pci 0000:11:00.0: BAR 0: set to [mem 0xf6c00000-0xf6c01fff 64bit] (PCI address [0xf6c00000-0xf6c01fff])
Mar 20 21:14:17 vostro kernel: pcieport 0000:00:1c.7: PCI bridge to [bus 11-16]
Mar 20 21:14:17 vostro kernel: pcieport 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
Mar 20 21:14:17 vostro kernel: pcieport 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff]
Mar 20 21:14:17 vostro kernel: pcieport 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
Mar 20 21:14:17 vostro kernel: xhci_hcd 0000:11:00.0: enabling device (0100 -> 0102)
Mar 20 21:14:17 vostro kernel: xhci_hcd 0000:11:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
Mar 20 21:14:17 vostro kernel: xhci_hcd 0000:11:00.0: xHCI Host Controller
Mar 20 21:14:17 vostro kernel: xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 5
Mar 20 21:14:17 vostro kernel: xhci_hcd 0000:11:00.0: irq 19, io mem 0xf6c00000
Mar 20 21:14:17 vostro kernel: usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
Mar 20 21:14:17 vostro kernel: usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Mar 20 21:14:17 vostro kernel: usb usb5: Product: xHCI Host Controller
Mar 20 21:14:17 vostro kernel: usb usb5: Manufacturer: Linux 3.2.11-default xhci_hcd
Mar 20 21:14:17 vostro kernel: usb usb5: SerialNumber: 0000:11:00.0
Mar 20 21:14:17 vostro kernel: hub 5-0:1.0: USB hub found
Mar 20 21:14:17 vostro kernel: hub 5-0:1.0: 2 ports detected
Mar 20 21:14:17 vostro kernel: xhci_hcd 0000:11:00.0: xHCI Host Controller
Mar 20 21:14:17 vostro kernel: xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 6
Mar 20 21:14:17 vostro kernel: usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
Mar 20 21:14:17 vostro kernel: usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Mar 20 21:14:17 vostro kernel: usb usb6: Product: xHCI Host Controller
Mar 20 21:14:17 vostro kernel: usb usb6: Manufacturer: Linux 3.2.11-default xhci_hcd
Mar 20 21:14:17 vostro kernel: usb usb6: SerialNumber: 0000:11:00.0
Mar 20 21:14:17 vostro kernel: hub 6-0:1.0: USB hub found
Mar 20 21:14:17 vostro kernel: hub 6-0:1.0: 2 ports detected
Mar 20 21:14:18 vostro kernel: usb 5-2: new low-speed USB device number 2 using xhci_hcd
Mar 20 21:14:18 vostro kernel: xhci_hcd 0000:11:00.0: WARN: short transfer on control ep
Mar 20 21:14:18 vostro last message repeated 2 times
Mar 20 21:14:18 vostro kernel: usb 5-2: New USB device found, idVendor=046d, idProduct=c019
Mar 20 21:14:18 vostro kernel: usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Mar 20 21:14:18 vostro kernel: usb 5-2: Product: Logitech USB Optical Mouse
Mar 20 21:14:18 vostro kernel: usb 5-2: Manufacturer: Logitech
Mar 20 21:14:18 vostro kernel: usb 5-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
Mar 20 21:14:18 vostro kernel: input: Logitech Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1c.7/0000:11:00.0/usb5/5-2/5-2:1.0/input/input21
Mar 20 21:14:18 vostro kernel: generic-usb 0003:046D:C019.0009: input,hidraw0: USB HID v1.11 Mouse [Logitech Logitech USB Optical Mouse] on usb-0000:11:00.0-2/input0
[-- Attachment #3: lspci.txt --]
[-- Type: text/plain, Size: 9304 bytes --]
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
Subsystem: Dell Device 04b3
Flags: bus master, fast devsel, latency 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller])
Subsystem: Dell Device 04b3
Flags: bus master, fast devsel, latency 0, IRQ 43
Memory at f6800000 (64-bit, non-prefetchable) [size=4M]
Memory at e0000000 (64-bit, prefetchable) [size=256M]
I/O ports at f000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [d0] Power Management version 2
Capabilities: [a4] PCI Advanced Features
Kernel driver in use: i915
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
Subsystem: Dell Device 04b3
Flags: bus master, fast devsel, latency 0, IRQ 57
Memory at f7f0a000 (64-bit, non-prefetchable) [size=16]
Capabilities: [50] Power Management version 3
Capabilities: [8c] MSI: Enable+ Count=1/1 Maskable- 64bit+
Kernel driver in use: mei
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) (prog-if 20 [EHCI])
Subsystem: Dell Device 04b3
Flags: bus master, medium devsel, latency 0, IRQ 16
Memory at f7f08000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
Kernel driver in use: ehci_hcd
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05)
Subsystem: Dell Device 04b3
Flags: bus master, fast devsel, latency 0, IRQ 58
Memory at f7f00000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
Capabilities: [100] Virtual Channel
Capabilities: [130] Root Complex Link
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=04, sec-latency=0
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Capabilities: [90] Subsystem: Dell Device 04b3
Capabilities: [a0] Power Management version 2
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=05, subordinate=06, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Prefetchable memory behind bridge: 00000000f1100000-00000000f11fffff
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Capabilities: [90] Subsystem: Dell Device 04b3
Capabilities: [a0] Power Management version 2
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=09, subordinate=0a, sec-latency=0
Memory behind bridge: f7e00000-f7efffff
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Capabilities: [90] Subsystem: Dell Device 04b3
Capabilities: [a0] Power Management version 2
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b5) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=0b, subordinate=0c, sec-latency=0
Memory behind bridge: f7d00000-f7dfffff
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Capabilities: [90] Subsystem: Dell Device 04b3
Capabilities: [a0] Power Management version 2
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.7 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 (rev b5) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=11, subordinate=16, sec-latency=0
I/O behind bridge: 0000c000-0000dfff
Memory behind bridge: f6c00000-f7cfffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f10fffff
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [90] Subsystem: Dell Device 04b3
Capabilities: [a0] Power Management version 2
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) (prog-if 20 [EHCI])
Subsystem: Dell Device 04b3
Flags: bus master, medium devsel, latency 0, IRQ 23
Memory at f7f07000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
Kernel driver in use: ehci_hcd
00:1f.0 ISA bridge: Intel Corporation HM67 Express Chipset Family LPC Controller (rev 05)
Subsystem: Dell Device 04b3
Flags: bus master, medium devsel, latency 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) (prog-if 01 [AHCI 1.0])
Subsystem: Dell Device 04b3
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 44
I/O ports at f0b0 [size=8]
I/O ports at f0a0 [size=4]
I/O ports at f090 [size=8]
I/O ports at f080 [size=4]
I/O ports at f060 [size=32]
Memory at f7f06000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [70] Power Management version 3
Capabilities: [a8] SATA HBA v1.0
Capabilities: [b0] PCI Advanced Features
Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05)
Subsystem: Dell Device 04b3
Flags: medium devsel, IRQ 18
Memory at f7f05000 (64-bit, non-prefetchable) [size=256]
I/O ports at f040 [size=32]
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
Subsystem: Dell Device 04b3
Flags: bus master, fast devsel, latency 0, IRQ 45
I/O ports at e000 [size=256]
Memory at f1104000 (64-bit, prefetchable) [size=4K]
Memory at f1100000 (64-bit, prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [70] Express Endpoint, MSI 01
Capabilities: [b0] MSI-X: Enable- Count=4 Masked-
Capabilities: [d0] Vital Product Data
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Virtual Channel
Capabilities: [160] Device Serial Number 01-00-00-00-68-4c-e0-00
Kernel driver in use: r8169
09:00.0 Network controller: Intel Corporation Centrino Wireless-N 1030 (rev 34)
Subsystem: Intel Corporation Centrino Wireless-N 1030 BGN
Flags: bus master, fast devsel, latency 0, IRQ 46
Memory at f7e00000 (64-bit, non-prefetchable) [size=8K]
Capabilities: [c8] Power Management version 3
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [e0] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Device Serial Number 4c-80-93-ff-ff-15-e6-c7
Kernel driver in use: iwlwifi
0b:00.0 USB controller: Texas Instruments Device 8241 (rev 02) (prog-if 30 [XHCI])
Subsystem: Dell Device 04b3
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at f7d00000 (64-bit, non-prefetchable) [size=64K]
Memory at f7d10000 (64-bit, non-prefetchable) [size=8K]
Capabilities: [40] Power Management version 3
Capabilities: [48] MSI: Enable- Count=1/8 Maskable- 64bit+
Capabilities: [70] Express Endpoint, MSI 00
Capabilities: [c0] MSI-X: Enable+ Count=8 Masked-
Capabilities: [100] Advanced Error Reporting
Capabilities: [150] Device Serial Number 08-00-28-00-00-20-00-00
Kernel driver in use: xhci_hcd
11:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) (prog-if 30 [XHCI])
Subsystem: NEC Corporation uPD720200 USB 3.0 Host Controller
Physical Slot: 7
Flags: bus master, fast devsel, latency 0, IRQ 19
Memory at f6c00000 (64-bit, non-prefetchable) [size=8K]
Capabilities: [50] Power Management version 3
Capabilities: [70] MSI: Enable- Count=1/8 Maskable- 64bit+
Capabilities: [90] MSI-X: Enable+ Count=8 Masked-
Capabilities: [a0] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Device Serial Number ff-ff-ff-ff-ff-ff-ff-ff
Capabilities: [150] Latency Tolerance Reporting
Kernel driver in use: xhci_hcd
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: 3.2.11: PCI Express card cannot be re-detected withing cca 60sec timeframe
2012-03-21 21:29 3.2.11: PCI Express card cannot be re-detected withing cca 60sec timeframe Martin Mokrejs
@ 2012-03-21 22:29 ` Yinghai Lu
[not found] ` <4F6A5A53.305@fold.natur.cuni.cz>
0 siblings, 1 reply; 55+ messages in thread
From: Yinghai Lu @ 2012-03-21 22:29 UTC (permalink / raw)
To: Martin Mokrejs; +Cc: linux-pci
[-- Attachment #1: Type: text/plain, Size: 1670 bytes --]
On Wed, Mar 21, 2012 at 2:29 PM, Martin Mokrejs
<mmokrejs@fold.natur.cuni.cz> wrote:
> Hi,
> I am not sure whether this is a bug or feature but I have problems
> getting my USB3.0 PCI express card detected in my Dello Vostro 3550 laptop.
> It appears to me after removal of the card there is about 60s window when
> the PCI INT is still kept (not released). After that time it is released,
> no matter that I for example meanwhile re-plugged the card already into
> the slot.
>
> After having found this I can confirm that my express card gets detected
> if I insert it in after at least 60 seconds since its previous removal.
>
> I have attached the logs from my attempts. Would anybody please confirm
> this is the intended behavior? Or is that because USB delay of the PCI INT
> resource after cards removal? Could I be, as a user, informed that I am not
> supposed to re-insert the card in a whatever time window?
>
> Either way, thank you for comments,
can you please post whole boot log ?
wonder if your slot is supporting surprise removal.. if not, attached
patch could remove some
noise about
Mar 20 21:04:17 vostro kernel: pciehp 0000:00:1c.7:pcie04: Card not
present on Slot(7)
Mar 20 21:04:18 vostro kernel: pciehp 0000:00:1c.7:pcie04: Card
present on Slot(7)
Mar 20 21:04:19 vostro kernel: pciehp 0000:00:1c.7:pcie04: Card not
present on Slot(7)
Mar 20 21:04:20 vostro kernel: pciehp 0000:00:1c.7:pcie04: Card
present on Slot(7).
also we have some patches in pci/linux-next, that will power off pcie
link after removal.
so please check if that tree is going to help or wait for kernel 3.4-rc1.
Yinghai
[-- Attachment #2: pciehp_suprise_present.patch --]
[-- Type: text/x-patch, Size: 1205 bytes --]
Subject: [PATCH] pciehp: Don't enable presence notification while surprise removal is not supported.
If surprise removal is not supported, that event get dropped later.
So there is no point to enable that.
Also Some sick chipset have those bit flip around.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
drivers/pci/hotplug/pciehp_hpc.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
Index: linux-2.6/drivers/pci/hotplug/pciehp_hpc.c
===================================================================
--- linux-2.6.orig/drivers/pci/hotplug/pciehp_hpc.c
+++ linux-2.6/drivers/pci/hotplug/pciehp_hpc.c
@@ -808,7 +808,7 @@ int pciehp_get_cur_lnk_width(struct slot
int pcie_enable_notification(struct controller *ctrl)
{
- u16 cmd, mask;
+ u16 cmd = 0, mask;
/*
* TBD: Power fault detected software notification support.
@@ -820,7 +820,8 @@ int pcie_enable_notification(struct cont
* when it is cleared in the interrupt service routine, and
* next power fault detected interrupt was notified again.
*/
- cmd = PCI_EXP_SLTCTL_PDCE;
+ if (HP_SUPR_RM(ctrl))
+ cmd |= PCI_EXP_SLTCTL_PDCE;
if (ATTN_BUTTN(ctrl))
cmd |= PCI_EXP_SLTCTL_ABPE;
if (MRL_SENS(ctrl))
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: 3.2.11: PCI Express card cannot be re-detected withing cca 60sec timeframe
[not found] ` <4F6A5A53.305@fold.natur.cuni.cz>
@ 2012-03-22 0:08 ` Yinghai Lu
[not found] ` <4F8BEB1D.9080903@fold.natur.cuni.cz>
0 siblings, 1 reply; 55+ messages in thread
From: Yinghai Lu @ 2012-03-22 0:08 UTC (permalink / raw)
To: Martin Mokrejs; +Cc: linux-pci
On Wed, Mar 21, 2012 at 3:46 PM, Martin Mokrejs
<mmokrejs@fold.natur.cuni.cz> wrote:
> Hi Yinghai,
> please find attached current dmesg output (not showing the bootup of the
> system anymore). at the end of the file you will see what happened when I
> inserted the card. I removed the card after some 10secs so that you can all.
> Sorry for the heavy USB debug messages. ;)
> In another file a record of the previous boot (new.dmesg2.txt).
>
> So shall I try the patch you sent me? ;-)
that may only help on some case like just booting up.
You may need to check.
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci.git linux-next
there is one patch there that is going to power down the link.
http://git.kernel.org/?p=linux/kernel/git/jbarnes/pci.git;a=patch;h=2debd9289997fc5d1c0043b41201a8b40d5e11d0
Thanks
Yinghai
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: 3.2.11: PCI Express card cannot be re-detected withing cca 60sec timeframe
[not found] ` <4F8BEB1D.9080903@fold.natur.cuni.cz>
@ 2012-04-16 10:53 ` Martin Mokrejs
2012-04-16 11:05 ` Martin Mokrejs
2012-04-16 18:07 ` Yinghai Lu
1 sibling, 1 reply; 55+ messages in thread
From: Martin Mokrejs @ 2012-04-16 10:53 UTC (permalink / raw)
To: Yinghai Lu; +Cc: linux-pci
Martin Mokrejs wrote:
> Hi Yinghai,
>
> Yinghai Lu wrote:
>> On Wed, Mar 21, 2012 at 3:46 PM, Martin Mokrejs
>> <mmokrejs@fold.natur.cuni.cz> wrote:
>>> Hi Yinghai,
>>> please find attached current dmesg output (not showing the bootup of the
>>> system anymore). at the end of the file you will see what happened when I
>>> inserted the card. I removed the card after some 10secs so that you can all.
>>> Sorry for the heavy USB debug messages. ;)
>>> In another file a record of the previous boot (new.dmesg2.txt).
>>>
>>> So shall I try the patch you sent me? ;-)
>>
>> that may only help on some case like just booting up.
>>
>> You may need to check.
>>
>> git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci.git linux-next
>>
>> there is one patch there that is going to power down the link.
>> http://git.kernel.org/?p=linux/kernel/git/jbarnes/pci.git;a=patch;h=2debd9289997fc5d1c0043b41201a8b40d5e11d0
>
> I had some Ooopses with 3.4-rc2 but now I have tested 3.4-rc3. Still, linux
> does NOT realize that I have removed an ExpressCard from the slot. It realizes
> that only when I pluging the card back again. Actually, this is a case of a
> NEC chipset base USB3.0 card.
>
> In contrast, kernel DOES recognize that I unplugged a FireWire card from the
> same slot.
>
> This is a Dell Vostro 3550 laptop. Below is what syslog logged with my comment.
> Empty lines between the log entries are inserted whe I either inserted or removed
> a card. Probably a bit more will be in the attached dmesg file.
[cut]
> REMOVED CARD
>
> Apr 16 11:30:02 vostro kernel: [ 361.001326] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
> Apr 16 11:30:02 vostro kernel: [ 361.001745] firewire_ohci 0000:11:00.0: removed fw-ohci device
>
> RE-INSERTED CARD
>
> Apr 16 11:30:05 vostro kernel: [ 364.150093] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
> Apr 16 11:30:06 vostro kernel: [ 364.279552] pci 0000:11:00.0: BAR 0: assigned [mem 0xf6c00000-0xf6c007ff 64bit]
> Apr 16 11:30:06 vostro kernel: [ 364.279578] pci 0000:11:00.0: BAR 2: assigned [io 0xc000-0xc0ff]
> Apr 16 11:30:06 vostro kernel: [ 364.279593] pcieport 0000:00:1c.7: PCI bridge to [bus 11-16]
> Apr 16 11:30:06 vostro kernel: [ 364.279609] pcieport 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
> Apr 16 11:30:06 vostro kernel: [ 364.279614] pcieport 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff]
> Apr 16 11:30:06 vostro kernel: [ 364.279618] pcieport 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
> Apr 16 11:30:06 vostro kernel: [ 364.279747] firewire_ohci 0000:11:00.0: enabling device (0100 -> 0103)
> Apr 16 11:30:06 vostro kernel: [ 364.359449] firewire_ohci 0000:11:00.0: added OHCI v1.10 device as card 1, 4 IR + 8 IT contexts, quirks 0x11
> Apr 16 11:30:06 vostro kernel: [ 364.858580] firewire_core 0000:11:00.0: created device fw0: GUID 0011066600000003, S400
>
> REMOVED CARD
>
> Apr 16 11:30:13 vostro kernel: [ 371.820798] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
> Apr 16 11:30:13 vostro kernel: [ 371.821220] firewire_ohci 0000:11:00.0: removed fw-ohci device
Bah. A follow-up. I just connected my SATA disk via eSATA port to the laptop (into it's USB2.0/eSATA port)
and funny what I got:
Apr 16 11:44:15 vostro kernel: [ 1212.112999] pci 0000:11:00.0: BAR 2: assigned [io 0xc000-0xc0ff]
Apr 16 11:44:15 vostro kernel: [ 1212.113014] pcieport 0000:00:1c.7: PCI bridge to [bus 11-16]
Apr 16 11:44:15 vostro kernel: [ 1212.113023] pcieport 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
Apr 16 11:44:15 vostro kernel: [ 1212.113039] pcieport 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff]
Apr 16 11:44:15 vostro kernel: [ 1212.113043] pcieport 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
Apr 16 11:44:15 vostro kernel: [ 1212.113166] firewire_ohci 0000:11:00.0: enabling device (0100 -> 0103)
Apr 16 11:44:15 vostro kernel: [ 1212.192863] firewire_ohci 0000:11:00.0: added OHCI v1.10 device as card 2, 4 IR + 8 IT contexts, quirks 0x11
Apr 16 11:44:16 vostro kernel: [ 1212.692011] firewire_core 0000:11:00.0: created device fw0: GUID 0011066600000003, S400
Apr 16 11:44:34 vostro kernel: [ 1230.851362] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
Apr 16 11:44:34 vostro kernel: [ 1230.851789] firewire_ohci 0000:11:00.0: removed fw-ohci device
Apr 16 12:49:12 vostro kernel: [ 5100.792787] ata6: hard resetting link
Apr 16 12:49:12 vostro kernel: [ 5101.535862] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Apr 16 12:49:12 vostro kernel: [ 5101.536675] ata6.00: ATA-8: ST3000DM001-9YN166, CC4C, max UDMA/133
Apr 16 12:49:12 vostro kernel: [ 5101.536687] ata6.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
Apr 16 12:49:12 vostro kernel: [ 5101.537505] ata6.00: configured for UDMA/133
Apr 16 12:49:12 vostro kernel: [ 5101.555791] ata6: EH complete
Apr 16 12:49:12 vostro kernel: [ 5101.555943] scsi 5:0:0:0: Direct-Access ATA ST3000DM001-9YN1 CC4C PQ: 0 ANSI: 5
Apr 16 12:49:12 vostro kernel: [ 5101.556096] sd 5:0:0:0: [sdc] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
Apr 16 12:49:12 vostro kernel: [ 5101.556099] sd 5:0:0:0: [sdc] 4096-byte physical blocks
Apr 16 12:49:12 vostro kernel: [ 5101.556108] sd 5:0:0:0: Attached scsi generic sg3 type 0
Apr 16 12:49:12 vostro kernel: [ 5101.556154] sd 5:0:0:0: [sdc] Write Protect is off
Apr 16 12:49:12 vostro kernel: [ 5101.556178] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Apr 16 12:49:12 vostro kernel: [ 5101.594983] sdc: sdc1
Apr 16 12:49:12 vostro kernel: [ 5101.595334] sd 5:0:0:0: [sdc] Attached SCSI disk
Martin
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: 3.2.11: PCI Express card cannot be re-detected withing cca 60sec timeframe
2012-04-16 10:53 ` Martin Mokrejs
@ 2012-04-16 11:05 ` Martin Mokrejs
0 siblings, 0 replies; 55+ messages in thread
From: Martin Mokrejs @ 2012-04-16 11:05 UTC (permalink / raw)
To: Yinghai Lu; +Cc: linux-pci
Martin Mokrejs wrote:
> Martin Mokrejs wrote:
>> Hi Yinghai,
>>
>> Yinghai Lu wrote:
>>> On Wed, Mar 21, 2012 at 3:46 PM, Martin Mokrejs
>>> <mmokrejs@fold.natur.cuni.cz> wrote:
>>>> Hi Yinghai,
>>>> please find attached current dmesg output (not showing the bootup of the
>>>> system anymore). at the end of the file you will see what happened when I
>>>> inserted the card. I removed the card after some 10secs so that you can all.
>>>> Sorry for the heavy USB debug messages. ;)
>>>> In another file a record of the previous boot (new.dmesg2.txt).
>>>>
>>>> So shall I try the patch you sent me? ;-)
>>>
>>> that may only help on some case like just booting up.
>>>
>>> You may need to check.
>>>
>>> git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci.git linux-next
>>>
>>> there is one patch there that is going to power down the link.
>>> http://git.kernel.org/?p=linux/kernel/git/jbarnes/pci.git;a=patch;h=2debd9289997fc5d1c0043b41201a8b40d5e11d0
>>
>> I had some Ooopses with 3.4-rc2 but now I have tested 3.4-rc3. Still, linux
>> does NOT realize that I have removed an ExpressCard from the slot. It realizes
>> that only when I pluging the card back again. Actually, this is a case of a
>> NEC chipset base USB3.0 card.
>>
>> In contrast, kernel DOES recognize that I unplugged a FireWire card from the
>> same slot.
>>
>> This is a Dell Vostro 3550 laptop. Below is what syslog logged with my comment.
>> Empty lines between the log entries are inserted whe I either inserted or removed
>> a card. Probably a bit more will be in the attached dmesg file.
>
> [cut]
>
>> REMOVED CARD
>>
>> Apr 16 11:30:02 vostro kernel: [ 361.001326] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
>> Apr 16 11:30:02 vostro kernel: [ 361.001745] firewire_ohci 0000:11:00.0: removed fw-ohci device
>>
>> RE-INSERTED CARD
>>
>> Apr 16 11:30:05 vostro kernel: [ 364.150093] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
>> Apr 16 11:30:06 vostro kernel: [ 364.279552] pci 0000:11:00.0: BAR 0: assigned [mem 0xf6c00000-0xf6c007ff 64bit]
>> Apr 16 11:30:06 vostro kernel: [ 364.279578] pci 0000:11:00.0: BAR 2: assigned [io 0xc000-0xc0ff]
>> Apr 16 11:30:06 vostro kernel: [ 364.279593] pcieport 0000:00:1c.7: PCI bridge to [bus 11-16]
>> Apr 16 11:30:06 vostro kernel: [ 364.279609] pcieport 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
>> Apr 16 11:30:06 vostro kernel: [ 364.279614] pcieport 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff]
>> Apr 16 11:30:06 vostro kernel: [ 364.279618] pcieport 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
>> Apr 16 11:30:06 vostro kernel: [ 364.279747] firewire_ohci 0000:11:00.0: enabling device (0100 -> 0103)
>> Apr 16 11:30:06 vostro kernel: [ 364.359449] firewire_ohci 0000:11:00.0: added OHCI v1.10 device as card 1, 4 IR + 8 IT contexts, quirks 0x11
>> Apr 16 11:30:06 vostro kernel: [ 364.858580] firewire_core 0000:11:00.0: created device fw0: GUID 0011066600000003, S400
>>
>> REMOVED CARD
>>
>> Apr 16 11:30:13 vostro kernel: [ 371.820798] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
>> Apr 16 11:30:13 vostro kernel: [ 371.821220] firewire_ohci 0000:11:00.0: removed fw-ohci device
>
>
> Bah. A follow-up. I just connected my SATA disk via eSATA port to the laptop (into it's USB2.0/eSATA port)
> and funny what I got:
>
> Apr 16 11:44:15 vostro kernel: [ 1212.112999] pci 0000:11:00.0: BAR 2: assigned [io 0xc000-0xc0ff]
> Apr 16 11:44:15 vostro kernel: [ 1212.113014] pcieport 0000:00:1c.7: PCI bridge to [bus 11-16]
> Apr 16 11:44:15 vostro kernel: [ 1212.113023] pcieport 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
> Apr 16 11:44:15 vostro kernel: [ 1212.113039] pcieport 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff]
> Apr 16 11:44:15 vostro kernel: [ 1212.113043] pcieport 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
> Apr 16 11:44:15 vostro kernel: [ 1212.113166] firewire_ohci 0000:11:00.0: enabling device (0100 -> 0103)
> Apr 16 11:44:15 vostro kernel: [ 1212.192863] firewire_ohci 0000:11:00.0: added OHCI v1.10 device as card 2, 4 IR + 8 IT contexts, quirks 0x11
> Apr 16 11:44:16 vostro kernel: [ 1212.692011] firewire_core 0000:11:00.0: created device fw0: GUID 0011066600000003, S400
> Apr 16 11:44:34 vostro kernel: [ 1230.851362] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
> Apr 16 11:44:34 vostro kernel: [ 1230.851789] firewire_ohci 0000:11:00.0: removed fw-ohci device
> Apr 16 12:49:12 vostro kernel: [ 5100.792787] ata6: hard resetting link
> Apr 16 12:49:12 vostro kernel: [ 5101.535862] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> Apr 16 12:49:12 vostro kernel: [ 5101.536675] ata6.00: ATA-8: ST3000DM001-9YN166, CC4C, max UDMA/133
> Apr 16 12:49:12 vostro kernel: [ 5101.536687] ata6.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
> Apr 16 12:49:12 vostro kernel: [ 5101.537505] ata6.00: configured for UDMA/133
> Apr 16 12:49:12 vostro kernel: [ 5101.555791] ata6: EH complete
> Apr 16 12:49:12 vostro kernel: [ 5101.555943] scsi 5:0:0:0: Direct-Access ATA ST3000DM001-9YN1 CC4C PQ: 0 ANSI: 5
> Apr 16 12:49:12 vostro kernel: [ 5101.556096] sd 5:0:0:0: [sdc] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
> Apr 16 12:49:12 vostro kernel: [ 5101.556099] sd 5:0:0:0: [sdc] 4096-byte physical blocks
> Apr 16 12:49:12 vostro kernel: [ 5101.556108] sd 5:0:0:0: Attached scsi generic sg3 type 0
> Apr 16 12:49:12 vostro kernel: [ 5101.556154] sd 5:0:0:0: [sdc] Write Protect is off
> Apr 16 12:49:12 vostro kernel: [ 5101.556178] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> Apr 16 12:49:12 vostro kernel: [ 5101.594983] sdc: sdc1
> Apr 16 12:49:12 vostro kernel: [ 5101.595334] sd 5:0:0:0: [sdc] Attached SCSI disk
Umm, no, sorry, the above follow-up is misleading. I got fooled by sylogd not flushing the logs.
The timestamps show that the firewire card was recognized to be removed immediately
(unlike the NEC USB card).
So, forget the previous email (not the thread). Sorry for noise. ;)
Martin
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: 3.2.11: PCI Express card cannot be re-detected withing cca 60sec timeframe
[not found] ` <4F8BEB1D.9080903@fold.natur.cuni.cz>
2012-04-16 10:53 ` Martin Mokrejs
@ 2012-04-16 18:07 ` Yinghai Lu
2012-04-16 19:39 ` Martin Mokrejs
[not found] ` <4F8C6E4E.1000205@fold.natur.cuni.cz>
1 sibling, 2 replies; 55+ messages in thread
From: Yinghai Lu @ 2012-04-16 18:07 UTC (permalink / raw)
To: Martin Mokrejs; +Cc: linux-pci
On Mon, Apr 16, 2012 at 2:49 AM, Martin Mokrejs
<mmokrejs@fold.natur.cuni.cz> wrote:
> Hi Yinghai,
>
> Yinghai Lu wrote:
>> On Wed, Mar 21, 2012 at 3:46 PM, Martin Mokrejs
> I had some Ooopses with 3.4-rc2 but now I have tested 3.4-rc3. Still, linux
> does NOT realize that I have removed an ExpressCard from the slot. It realizes
> that only when I pluging the card back again. Actually, this is a case of a
> NEC chipset base USB3.0 card.
>
> In contrast, kernel DOES recognize that I unplugged a FireWire card from the
> same slot.
>
> This is a Dell Vostro 3550 laptop. Below is what syslog logged with my comment.
> Empty lines between the log entries are inserted whe I either inserted or removed
> a card. Probably a bit more will be in the attached dmesg file.
>
>
> INSERTING CARD
>
> Apr 16 11:26:08 vostro kernel: [ 126.849689] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
> Apr 16 11:26:08 vostro kernel: [ 126.970840] pci 0000:11:00.0: BAR 0: assigned [mem 0xf6c00000-0xf6c01fff 64bit]
..
> Apr 16 11:26:08 vostro kernel: [ 126.971030] xhci_hcd 0000:11:00.0: enabling device (0100 -> 0102)
> Apr 16 11:26:08 vostro kernel: [ 126.971084] xhci_hcd 0000:11:00.0: xHCI Host Controller
> Apr 16 11:26:08 vostro kernel: [ 126.971092] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 5
> Apr 16 11:26:08 vostro kernel: [ 126.971400] xhci_hcd 0000:11:00.0: irq 19, io mem 0xf6c00000
...
>
> REMOVED CARD
>
> note (nothing happend)
>
> RE-INSERTED CARD
>
> Apr 16 11:28:42 vostro kernel: [ 280.514490] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
> Apr 16 11:28:42 vostro kernel: [ 280.514766] xhci_hcd 0000:11:00.0: remove, state 4
> Apr 16 11:28:42 vostro kernel: [ 280.514771] usb usb6: USB disconnect, device number 1
> Apr 16 11:28:42 vostro kernel: [ 280.514900] xhci_hcd 0000:11:00.0: Host not halted after 16000 microseconds.
> Apr 16 11:28:42 vostro kernel: [ 280.514903] xhci_hcd 0000:11:00.0: USB bus 6 deregistered
> Apr 16 11:28:42 vostro kernel: [ 280.514908] xhci_hcd 0000:11:00.0: remove, state 4
> Apr 16 11:28:42 vostro kernel: [ 280.514911] usb usb5: USB disconnect, device number 1
> Apr 16 11:28:42 vostro kernel: [ 280.515071] xhci_hcd 0000:11:00.0: Host not halted after 16000 microseconds.
> Apr 16 11:28:42 vostro kernel: [ 280.515170] xhci_hcd 0000:11:00.0: USB bus 5 deregistered
So get the interrupt for surprise removal only just after put the card back?
> Apr 16 11:28:42 vostro kernel: [ 280.530950] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
> Apr 16 11:28:42 vostro kernel: [ 280.655913] pci 0000:11:00.0: BAR 0: assigned [mem 0xf6c00000-0xf6c01fff 64bit]
> Apr 16 11:28:42 vostro kernel: [ 280.655957] pcieport 0000:00:1c.7: PCI bridge to [bus 11-16]
> Apr 16 11:28:42 vostro kernel: [ 280.655960] pcieport 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
> Apr 16 11:28:42 vostro kernel: [ 280.655965] pcieport 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff]
> Apr 16 11:28:42 vostro kernel: [ 280.655969] pcieport 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
> Apr 16 11:28:42 vostro kernel: [ 280.656108] xhci_hcd 0000:11:00.0: enabling device (0100 -> 0102)
...
>
> Now I took a DIFFERENT card: Axago ECF-X1 providing 2x 1394a
>
> INSERTED CARD
>
> Apr 16 11:29:51 vostro kernel: [ 350.147852] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
> Apr 16 11:29:51 vostro kernel: [ 350.148133] xhci_hcd 0000:11:00.0: remove, state 4
> Apr 16 11:29:51 vostro kernel: [ 350.148138] usb usb6: USB disconnect, device number 1
> Apr 16 11:29:51 vostro kernel: [ 350.148311] xhci_hcd 0000:11:00.0: Host not halted after 16000 microseconds.
> Apr 16 11:29:51 vostro kernel: [ 350.148316] xhci_hcd 0000:11:00.0: USB bus 6 deregistered
> Apr 16 11:29:51 vostro kernel: [ 350.148322] xhci_hcd 0000:11:00.0: remove, state 4
> Apr 16 11:29:51 vostro kernel: [ 350.148326] usb usb5: USB disconnect, device number 1
> Apr 16 11:29:51 vostro kernel: [ 350.148519] xhci_hcd 0000:11:00.0: Host not halted after 16000 microseconds.
> Apr 16 11:29:51 vostro kernel: [ 350.148612] xhci_hcd 0000:11:00.0: USB bus 5 deregistered
after you insert firewire card, it got surprise remove interrupt...
> Apr 16 11:29:51 vostro kernel: [ 350.156812] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
> Apr 16 11:29:52 vostro kernel: [ 350.277415] pci 0000:11:00.0: BAR 0: assigned [mem 0xf6c00000-0xf6c007ff 64bit]
> Apr 16 11:29:52 vostro kernel: [ 350.277442] pci 0000:11:00.0: BAR 2: assigned [io 0xc000-0xc0ff]
> Apr 16 11:29:52 vostro kernel: [ 350.277458] pcieport 0000:00:1c.7: PCI bridge to [bus 11-16]
> Apr 16 11:29:52 vostro kernel: [ 350.277473] pcieport 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
> Apr 16 11:29:52 vostro kernel: [ 350.277478] pcieport 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff]
> Apr 16 11:29:52 vostro kernel: [ 350.277482] pcieport 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
> Apr 16 11:29:52 vostro kernel: [ 350.363314] firewire_ohci 0000:11:00.0: enabling device (0100 -> 0103)
> Apr 16 11:29:52 vostro kernel: [ 350.437174] firewire_ohci 0000:11:00.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
> Apr 16 11:29:52 vostro kernel: [ 350.936323] firewire_core 0000:11:00.0: created device fw0: GUID 0011066600000003, S400
>
please check boot with pciehp.pciehp_debug=1
also you could use tail -f /var/log/messages to get more timely outputs.
Thanks
Yinghai
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: 3.2.11: PCI Express card cannot be re-detected withing cca 60sec timeframe
2012-04-16 18:07 ` Yinghai Lu
@ 2012-04-16 19:39 ` Martin Mokrejs
2012-04-16 19:45 ` Martin Mokrejs
2012-04-16 21:04 ` Yinghai Lu
[not found] ` <4F8C6E4E.1000205@fold.natur.cuni.cz>
1 sibling, 2 replies; 55+ messages in thread
From: Martin Mokrejs @ 2012-04-16 19:39 UTC (permalink / raw)
To: Yinghai Lu; +Cc: linux-pci
Yinghai Lu wrote:
> On Mon, Apr 16, 2012 at 2:49 AM, Martin Mokrejs
> <mmokrejs@fold.natur.cuni.cz> wrote:
>> Hi Yinghai,
>>
>> Yinghai Lu wrote:
>>> On Wed, Mar 21, 2012 at 3:46 PM, Martin Mokrejs
>> I had some Ooopses with 3.4-rc2 but now I have tested 3.4-rc3. Still, linux
>> does NOT realize that I have removed an ExpressCard from the slot. It realizes
>> that only when I pluging the card back again. Actually, this is a case of a
>> NEC chipset base USB3.0 card.
>>
>> In contrast, kernel DOES recognize that I unplugged a FireWire card from the
>> same slot.
>>
>> This is a Dell Vostro 3550 laptop. Below is what syslog logged with my comment.
>> Empty lines between the log entries are inserted whe I either inserted or removed
>> a card. Probably a bit more will be in the attached dmesg file.
[cut]
> please check boot with pciehp.pciehp_debug=1
>
> also you could use tail -f /var/log/messages to get more timely outputs.
I tried the third Express Card I do have here. It is probably the most interesting
to play with. ;) It plugs somehow weirdly into the slot. I somehow have to push it in
and a little bit pull out so that some mechanical lock catches the card. But, it allocated
resources only once, and in other cases the driver is somehow locked up. It could be
a driver issue but I think it is interesting information in this moment. Below I leave
always 3 empty lines to emphasize I was pulling out the card and after a while back in
(like in previous attempts). The output is just the one from dmesg, it is more detailed
then what is logged through syslogd.
[ 2784.573629] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 8
[ 2784.573631] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
[ 2784.573644] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
[ 2784.573669] pciehp 0000:00:1c.7:pcie04: Surprise Removal
[ 2785.580455] pciehp 0000:00:1c.7:pcie04: pciehp_check_link_status: lnk_status = 7811
[ 2785.580464] pciehp 0000:00:1c.7:pcie04: Link Training Error occurs
[ 2785.580470] pciehp 0000:00:1c.7:pcie04: Failed to check link status
[ 2788.317351] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 8
[ 2788.317360] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
[ 2788.317369] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
[ 2788.317412] pciehp 0000:00:1c.7:pcie04: Surprise Removal
[ 2788.317570] pciehp 0000:00:1c.7:pcie04: Disabling domain:bus:device=0000:11:00
[ 2788.317572] pciehp 0000:00:1c.7:pcie04: pciehp_unconfigure_device: domain:bus:dev = 0000:11:00
[ 2788.799777] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 8
[ 2788.799779] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
[ 2788.799782] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
[ 2788.799802] pciehp 0000:00:1c.7:pcie04: Surprise Removal
[ 2789.804129] pciehp 0000:00:1c.7:pcie04: pciehp_check_link_status: lnk_status = 7011
[ 2789.804399] pci 0000:11:00.0: [9710:9912] type 0 class 0x000700
[ 2789.804610] pci 0000:11:00.0: reg 10: [io 0x0000-0x0007]
[ 2789.804743] pci 0000:11:00.0: reg 14: [mem 0x00000000-0x00000fff]
[ 2789.805193] pci 0000:11:00.0: reg 24: [mem 0x00000000-0x00000fff]
[ 2789.805976] pci 0000:11:00.0: PME# supported from D3hot D3cold
[ 2789.806397] pci 0000:11:00.1: [9710:9912] type 0 class 0x000700
[ 2789.806618] pci 0000:11:00.1: reg 10: [io 0x0000-0x0007]
[ 2789.806802] pci 0000:11:00.1: reg 14: [mem 0x00000000-0x00000fff]
[ 2789.808796] pci 0000:11:00.1: reg 24: [mem 0x00000000-0x00000fff]
[ 2789.809452] pci 0000:11:00.1: PME# supported from D3hot D3cold
[ 2789.809800] pci 0000:11:00.2: [9710:9912] type 0 class 0x000701
[ 2789.809955] pci 0000:11:00.2: reg 10: [io 0x0000-0x0007]
[ 2789.810086] pci 0000:11:00.2: reg 14: [io 0x0000-0x0007]
[ 2789.810165] pci 0000:11:00.2: reg 18: [mem 0x00000000-0x00000fff]
[ 2789.810523] pci 0000:11:00.2: reg 24: [mem 0x00000000-0x00000fff]
[ 2789.811273] pci 0000:11:00.2: PME# supported from D3hot D3cold
[ 2789.864174] pci 0000:11:00.0: BAR 1: assigned [mem 0xf6c00000-0xf6c00fff]
[ 2789.864199] pci 0000:11:00.0: BAR 5: assigned [mem 0xf6c01000-0xf6c01fff]
[ 2789.864224] pci 0000:11:00.1: BAR 1: assigned [mem 0xf6c02000-0xf6c02fff]
[ 2789.864250] pci 0000:11:00.1: BAR 5: assigned [mem 0xf6c03000-0xf6c03fff]
[ 2789.864294] pci 0000:11:00.2: BAR 2: assigned [mem 0xf6c04000-0xf6c04fff]
[ 2789.864339] pci 0000:11:00.2: BAR 5: assigned [mem 0xf6c05000-0xf6c05fff]
[ 2789.864396] pci 0000:11:00.0: BAR 0: assigned [io 0xc000-0xc007]
[ 2789.864461] pci 0000:11:00.1: BAR 0: assigned [io 0xc008-0xc00f]
[ 2789.864535] pci 0000:11:00.2: BAR 0: assigned [io 0xc010-0xc017]
[ 2789.864614] pci 0000:11:00.2: BAR 1: assigned [io 0xc018-0xc01f]
[ 2789.864640] pcieport 0000:00:1c.7: PCI bridge to [bus 11-16]
[ 2789.864643] pcieport 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
[ 2789.864648] pcieport 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff]
[ 2789.864652] pcieport 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
[ 2789.864953] serial 0000:11:00.0: enabling device (0100 -> 0103)
[ 2789.910711] 0000:11:00.0: ttyS0 at I/O 0xc000 (irq = 19) is a ST16650V2
[ 2789.911900] serial 0000:11:00.1: enabling device (0100 -> 0103)
[ 2789.953869] 0000:11:00.1: ttyS1 at I/O 0xc008 (irq = 16) is a ST16650V2
[ 2790.018840] ppdev: user-space parallel port driver
[ 2790.020038] parport_serial 0000:11:00.2: enabling device (0100 -> 0103)
[ 2790.020647] parport0: PC-style at 0xc010 (0xc018), irq 17, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
[ 2839.728485] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 8
[ 2839.728494] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
[ 2839.728503] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
[ 2839.728546] pciehp 0000:00:1c.7:pcie04: Surprise Removal
[ 2839.728710] pciehp 0000:00:1c.7:pcie04: Disabling domain:bus:device=0000:11:00
[ 2839.728712] pciehp 0000:00:1c.7:pcie04: pciehp_unconfigure_device: domain:bus:dev = 0000:11:00
[ 2859.890589] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 8
[ 2859.890602] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
[ 2859.890605] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
[ 2859.890631] pciehp 0000:00:1c.7:pcie04: Surprise Removal
[ 2860.897910] pciehp 0000:00:1c.7:pcie04: pciehp_check_link_status: lnk_status = 7811
[ 2860.897919] pciehp 0000:00:1c.7:pcie04: Link Training Error occurs
[ 2860.897925] pciehp 0000:00:1c.7:pcie04: Failed to check link status
[ 2860.907011] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 8
[ 2860.907019] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
[ 2860.907028] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
[ 2860.907073] pciehp 0000:00:1c.7:pcie04: Surprise Removal
[ 2860.907209] pciehp 0000:00:1c.7:pcie04: Disabling domain:bus:device=0000:11:00
[ 2860.907211] pciehp 0000:00:1c.7:pcie04: pciehp_unconfigure_device: domain:bus:dev = 0000:11:00
[ 2861.242654] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 8
[ 2861.242656] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
[ 2861.242669] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
[ 2861.242684] pciehp 0000:00:1c.7:pcie04: Surprise Removal
[ 2862.245893] pciehp 0000:00:1c.7:pcie04: pciehp_check_link_status: lnk_status = 7811
[ 2862.245902] pciehp 0000:00:1c.7:pcie04: Link Training Error occurs
[ 2862.245908] pciehp 0000:00:1c.7:pcie04: Failed to check link status
[ 2900.516939] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 8
[ 2900.516948] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
[ 2900.516957] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
[ 2900.516999] pciehp 0000:00:1c.7:pcie04: Surprise Removal
[ 2900.517170] pciehp 0000:00:1c.7:pcie04: Disabling domain:bus:device=0000:11:00
[ 2900.517172] pciehp 0000:00:1c.7:pcie04: pciehp_unconfigure_device: domain:bus:dev = 0000:11:00
[ 2917.473608] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 8
[ 2917.473610] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
[ 2917.473624] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
[ 2917.473649] pciehp 0000:00:1c.7:pcie04: Surprise Removal
[ 2918.481860] pciehp 0000:00:1c.7:pcie04: pciehp_check_link_status: lnk_status = 7811
[ 2918.481869] pciehp 0000:00:1c.7:pcie04: Link Training Error occurs
[ 2918.481875] pciehp 0000:00:1c.7:pcie04: Failed to check link status
[ 2962.382234] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 8
[ 2962.382244] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
[ 2962.382253] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
[ 2962.382283] pciehp 0000:00:1c.7:pcie04: Surprise Removal
[ 2962.382446] pciehp 0000:00:1c.7:pcie04: Disabling domain:bus:device=0000:11:00
[ 2962.382448] pciehp 0000:00:1c.7:pcie04: pciehp_unconfigure_device: domain:bus:dev = 0000:11:00
[ 2991.261907] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 8
[ 2991.261920] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
[ 2991.261923] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
[ 2991.261943] pciehp 0000:00:1c.7:pcie04: Surprise Removal
[ 2992.261621] pciehp 0000:00:1c.7:pcie04: pciehp_check_link_status: lnk_status = 7811
[ 2992.261630] pciehp 0000:00:1c.7:pcie04: Link Training Error occurs
[ 2992.261636] pciehp 0000:00:1c.7:pcie04: Failed to check link status
[ 3010.910120] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 8
[ 3010.910129] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
[ 3010.910138] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
[ 3010.910180] pciehp 0000:00:1c.7:pcie04: Surprise Removal
[ 3010.910346] pciehp 0000:00:1c.7:pcie04: Disabling domain:bus:device=0000:11:00
[ 3010.910348] pciehp 0000:00:1c.7:pcie04: pciehp_unconfigure_device: domain:bus:dev = 0000:11:00
The card is AXAGO ECA-SP (2xRS232 and 1xIEEE1234) used these drivers and should be based on MosChip9901 :
parport_serial 7071 0
ppdev 5670 0
parport_pc 29557 1 parport_serial
parport 32353 2 ppdev,parport_pc
Interesting, some months ago I had to patch the kernel but now it is recognized
by vanilla kernel? I do not have compiled for this kernel the 99xx module yet.
Hmm?
# ls -la Axago_drivers_CDROM_v1.09/ECA-Px_Sx/Linux/MCS99XX_NonCascade/
total 1052
dr-xr-xr-x 3 root root 4096 Feb 12 23:20 .
dr-xr-xr-x 4 root root 4096 Oct 8 2011 ..
-rw-r--r-- 1 root root 394 Feb 12 23:20 .99xx.ko.cmd
-rw-r--r-- 1 root root 23665 Feb 12 23:20 .99xx.mod.o.cmd
-rw-r--r-- 1 root root 35989 Feb 12 23:20 .99xx.o.cmd
drwxr-xr-x 2 root root 4096 Feb 12 23:20 .tmp_versions
-r-xr-xr-x 1 root root 69578 Feb 24 2011 99xx.c
-r-xr-xr-x 1 root root 5499 Feb 24 2011 99xx.h
-rw-r--r-- 1 root root 431305 Feb 12 23:20 99xx.ko
-rw-r--r-- 1 root root 2033 Feb 12 23:20 99xx.mod.c
-rw-r--r-- 1 root root 54760 Feb 12 23:20 99xx.mod.o
-rw-r--r-- 1 root root 378280 Feb 12 23:20 99xx.o
-r-xr-xr-x 1 root root 1141 Mar 7 2011 99xx_ReleaseNotes
-r-xr-xr-x 1 root root 1108 Feb 8 00:05 Makefile
-r-xr-xr-x 1 root root 1045 Feb 8 00:04 Makefile.ori
-rw-r--r-- 1 root root 0 Feb 12 23:20 Module.symvers
-r-xr-xr-x 1 root root 88 Mar 8 2011 mcs99xx
-rw-r--r-- 1 root root 82 Feb 12 23:20 modules.order
-r-xr-xr-x 1 root root 2802 Feb 24 2011 readme
-r-xr-xr-x 1 root root 2521 Feb 24 2011 testreport
#
http://izto.org/mcs9865/
http://forums.gentoo.org/viewtopic-p-6949842.html
11:00.2 Parallel controller [0701]: NetMos Technology Device [9710:9912] (prog-if 03 [IEEE1284])
Subsystem: Device [a000:2000]
Physical Slot: 7
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 17
Region 0: I/O ports at c010 [size=8]
Region 1: I/O ports at c018 [size=8]
Region 2: Memory at f6c04000 (32-bit, non-prefetchable) [size=4K]
Region 5: Memory at f6c05000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [78] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] Express (v1) Legacy Endpoint, MSI 00
DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <1us, L1 <2us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <64ns, L1 unlimited
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM L0s Enabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr+ BadTLP- BadDLLP- Rollover+ Timeout+ NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Kernel driver in use: parport_serial
Kernel modules: parport_serial
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: 3.2.11: PCI Express card cannot be re-detected withing cca 60sec timeframe
2012-04-16 19:39 ` Martin Mokrejs
@ 2012-04-16 19:45 ` Martin Mokrejs
2012-04-16 21:04 ` Yinghai Lu
1 sibling, 0 replies; 55+ messages in thread
From: Martin Mokrejs @ 2012-04-16 19:45 UTC (permalink / raw)
To: Yinghai Lu; +Cc: linux-pci
Martin Mokrejs wrote:
> Yinghai Lu wrote:
>> On Mon, Apr 16, 2012 at 2:49 AM, Martin Mokrejs
>> <mmokrejs@fold.natur.cuni.cz> wrote:
>>> Hi Yinghai,
>>>
>>> Yinghai Lu wrote:
>>>> On Wed, Mar 21, 2012 at 3:46 PM, Martin Mokrejs
>>> I had some Ooopses with 3.4-rc2 but now I have tested 3.4-rc3. Still, linux
>>> does NOT realize that I have removed an ExpressCard from the slot. It realizes
>>> that only when I pluging the card back again. Actually, this is a case of a
>>> NEC chipset base USB3.0 card.
>>>
>>> In contrast, kernel DOES recognize that I unplugged a FireWire card from the
>>> same slot.
>>>
>>> This is a Dell Vostro 3550 laptop. Below is what syslog logged with my comment.
>>> Empty lines between the log entries are inserted whe I either inserted or removed
>>> a card. Probably a bit more will be in the attached dmesg file.
>
> [cut]
>
>> please check boot with pciehp.pciehp_debug=1
>>
>> also you could use tail -f /var/log/messages to get more timely outputs.
>
> I tried the third Express Card I do have here. It is probably the most interesting
> to play with. ;) It plugs somehow weirdly into the slot. I somehow have to push it in
> and a little bit pull out so that some mechanical lock catches the card. But, it allocated
> resources only once, and in other cases the driver is somehow locked up. It could be
> a driver issue but I think it is interesting information in this moment. Below I leave
> always 3 empty lines to emphasize I was pulling out the card and after a while back in
> (like in previous attempts). The output is just the one from dmesg, it is more detailed
> then what is logged through syslogd.
>
>
>
>
> [ 2784.573629] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 8
> [ 2784.573631] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
> [ 2784.573644] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
> [ 2784.573669] pciehp 0000:00:1c.7:pcie04: Surprise Removal
> [ 2785.580455] pciehp 0000:00:1c.7:pcie04: pciehp_check_link_status: lnk_status = 7811
> [ 2785.580464] pciehp 0000:00:1c.7:pcie04: Link Training Error occurs
> [ 2785.580470] pciehp 0000:00:1c.7:pcie04: Failed to check link status
> [ 2788.317351] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 8
> [ 2788.317360] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
> [ 2788.317369] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
> [ 2788.317412] pciehp 0000:00:1c.7:pcie04: Surprise Removal
> [ 2788.317570] pciehp 0000:00:1c.7:pcie04: Disabling domain:bus:device=0000:11:00
> [ 2788.317572] pciehp 0000:00:1c.7:pcie04: pciehp_unconfigure_device: domain:bus:dev = 0000:11:00
> [ 2788.799777] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 8
> [ 2788.799779] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
> [ 2788.799782] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
> [ 2788.799802] pciehp 0000:00:1c.7:pcie04: Surprise Removal
> [ 2789.804129] pciehp 0000:00:1c.7:pcie04: pciehp_check_link_status: lnk_status = 7011
> [ 2789.804399] pci 0000:11:00.0: [9710:9912] type 0 class 0x000700
> [ 2789.804610] pci 0000:11:00.0: reg 10: [io 0x0000-0x0007]
> [ 2789.804743] pci 0000:11:00.0: reg 14: [mem 0x00000000-0x00000fff]
> [ 2789.805193] pci 0000:11:00.0: reg 24: [mem 0x00000000-0x00000fff]
> [ 2789.805976] pci 0000:11:00.0: PME# supported from D3hot D3cold
> [ 2789.806397] pci 0000:11:00.1: [9710:9912] type 0 class 0x000700
> [ 2789.806618] pci 0000:11:00.1: reg 10: [io 0x0000-0x0007]
> [ 2789.806802] pci 0000:11:00.1: reg 14: [mem 0x00000000-0x00000fff]
> [ 2789.808796] pci 0000:11:00.1: reg 24: [mem 0x00000000-0x00000fff]
> [ 2789.809452] pci 0000:11:00.1: PME# supported from D3hot D3cold
> [ 2789.809800] pci 0000:11:00.2: [9710:9912] type 0 class 0x000701
> [ 2789.809955] pci 0000:11:00.2: reg 10: [io 0x0000-0x0007]
> [ 2789.810086] pci 0000:11:00.2: reg 14: [io 0x0000-0x0007]
> [ 2789.810165] pci 0000:11:00.2: reg 18: [mem 0x00000000-0x00000fff]
> [ 2789.810523] pci 0000:11:00.2: reg 24: [mem 0x00000000-0x00000fff]
> [ 2789.811273] pci 0000:11:00.2: PME# supported from D3hot D3cold
> [ 2789.864174] pci 0000:11:00.0: BAR 1: assigned [mem 0xf6c00000-0xf6c00fff]
> [ 2789.864199] pci 0000:11:00.0: BAR 5: assigned [mem 0xf6c01000-0xf6c01fff]
> [ 2789.864224] pci 0000:11:00.1: BAR 1: assigned [mem 0xf6c02000-0xf6c02fff]
> [ 2789.864250] pci 0000:11:00.1: BAR 5: assigned [mem 0xf6c03000-0xf6c03fff]
> [ 2789.864294] pci 0000:11:00.2: BAR 2: assigned [mem 0xf6c04000-0xf6c04fff]
> [ 2789.864339] pci 0000:11:00.2: BAR 5: assigned [mem 0xf6c05000-0xf6c05fff]
> [ 2789.864396] pci 0000:11:00.0: BAR 0: assigned [io 0xc000-0xc007]
> [ 2789.864461] pci 0000:11:00.1: BAR 0: assigned [io 0xc008-0xc00f]
> [ 2789.864535] pci 0000:11:00.2: BAR 0: assigned [io 0xc010-0xc017]
> [ 2789.864614] pci 0000:11:00.2: BAR 1: assigned [io 0xc018-0xc01f]
> [ 2789.864640] pcieport 0000:00:1c.7: PCI bridge to [bus 11-16]
> [ 2789.864643] pcieport 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
> [ 2789.864648] pcieport 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff]
> [ 2789.864652] pcieport 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
> [ 2789.864953] serial 0000:11:00.0: enabling device (0100 -> 0103)
> [ 2789.910711] 0000:11:00.0: ttyS0 at I/O 0xc000 (irq = 19) is a ST16650V2
> [ 2789.911900] serial 0000:11:00.1: enabling device (0100 -> 0103)
> [ 2789.953869] 0000:11:00.1: ttyS1 at I/O 0xc008 (irq = 16) is a ST16650V2
> [ 2790.018840] ppdev: user-space parallel port driver
> [ 2790.020038] parport_serial 0000:11:00.2: enabling device (0100 -> 0103)
> [ 2790.020647] parport0: PC-style at 0xc010 (0xc018), irq 17, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
>
>
> [ 2839.728485] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 8
> [ 2839.728494] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
> [ 2839.728503] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
> [ 2839.728546] pciehp 0000:00:1c.7:pcie04: Surprise Removal
> [ 2839.728710] pciehp 0000:00:1c.7:pcie04: Disabling domain:bus:device=0000:11:00
> [ 2839.728712] pciehp 0000:00:1c.7:pcie04: pciehp_unconfigure_device: domain:bus:dev = 0000:11:00
>
>
> [ 2859.890589] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 8
> [ 2859.890602] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
> [ 2859.890605] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
> [ 2859.890631] pciehp 0000:00:1c.7:pcie04: Surprise Removal
> [ 2860.897910] pciehp 0000:00:1c.7:pcie04: pciehp_check_link_status: lnk_status = 7811
> [ 2860.897919] pciehp 0000:00:1c.7:pcie04: Link Training Error occurs
> [ 2860.897925] pciehp 0000:00:1c.7:pcie04: Failed to check link status
> [ 2860.907011] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 8
> [ 2860.907019] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
> [ 2860.907028] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
> [ 2860.907073] pciehp 0000:00:1c.7:pcie04: Surprise Removal
> [ 2860.907209] pciehp 0000:00:1c.7:pcie04: Disabling domain:bus:device=0000:11:00
> [ 2860.907211] pciehp 0000:00:1c.7:pcie04: pciehp_unconfigure_device: domain:bus:dev = 0000:11:00
> [ 2861.242654] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 8
> [ 2861.242656] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
> [ 2861.242669] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
> [ 2861.242684] pciehp 0000:00:1c.7:pcie04: Surprise Removal
> [ 2862.245893] pciehp 0000:00:1c.7:pcie04: pciehp_check_link_status: lnk_status = 7811
> [ 2862.245902] pciehp 0000:00:1c.7:pcie04: Link Training Error occurs
> [ 2862.245908] pciehp 0000:00:1c.7:pcie04: Failed to check link status
>
>
> [ 2900.516939] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 8
> [ 2900.516948] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
> [ 2900.516957] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
> [ 2900.516999] pciehp 0000:00:1c.7:pcie04: Surprise Removal
> [ 2900.517170] pciehp 0000:00:1c.7:pcie04: Disabling domain:bus:device=0000:11:00
> [ 2900.517172] pciehp 0000:00:1c.7:pcie04: pciehp_unconfigure_device: domain:bus:dev = 0000:11:00
>
>
> [ 2917.473608] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 8
> [ 2917.473610] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
> [ 2917.473624] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
> [ 2917.473649] pciehp 0000:00:1c.7:pcie04: Surprise Removal
> [ 2918.481860] pciehp 0000:00:1c.7:pcie04: pciehp_check_link_status: lnk_status = 7811
> [ 2918.481869] pciehp 0000:00:1c.7:pcie04: Link Training Error occurs
> [ 2918.481875] pciehp 0000:00:1c.7:pcie04: Failed to check link status
>
>
> [ 2962.382234] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 8
> [ 2962.382244] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
> [ 2962.382253] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
> [ 2962.382283] pciehp 0000:00:1c.7:pcie04: Surprise Removal
> [ 2962.382446] pciehp 0000:00:1c.7:pcie04: Disabling domain:bus:device=0000:11:00
> [ 2962.382448] pciehp 0000:00:1c.7:pcie04: pciehp_unconfigure_device: domain:bus:dev = 0000:11:00
> [ 2991.261907] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 8
> [ 2991.261920] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
> [ 2991.261923] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
> [ 2991.261943] pciehp 0000:00:1c.7:pcie04: Surprise Removal
> [ 2992.261621] pciehp 0000:00:1c.7:pcie04: pciehp_check_link_status: lnk_status = 7811
> [ 2992.261630] pciehp 0000:00:1c.7:pcie04: Link Training Error occurs
> [ 2992.261636] pciehp 0000:00:1c.7:pcie04: Failed to check link status
>
>
> [ 3010.910120] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 8
> [ 3010.910129] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
> [ 3010.910138] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
> [ 3010.910180] pciehp 0000:00:1c.7:pcie04: Surprise Removal
> [ 3010.910346] pciehp 0000:00:1c.7:pcie04: Disabling domain:bus:device=0000:11:00
> [ 3010.910348] pciehp 0000:00:1c.7:pcie04: pciehp_unconfigure_device: domain:bus:dev = 0000:11:00
I have to add, that as I plugged in the card some 15 minutes later, I got all PCI resources.
The line "Apr 16 21:23:47" is actually "[ 3010.910138]" above.
Apr 16 21:23:47 vostro kernel: [ 3010.910138] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
Apr 16 21:38:06 vostro kernel: [ 3868.604844] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
The time "Apr 16 21:38:06" corresponds to "[ 3868.604828]" right below:
[ 3868.604828] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 8
[ 3868.604840] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
[ 3868.604844] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
[ 3868.604869] pciehp 0000:00:1c.7:pcie04: Surprise Removal
[ 3869.610640] pciehp 0000:00:1c.7:pcie04: pciehp_check_link_status: lnk_status = 7011
[ 3869.610824] pci 0000:11:00.0: [9710:9912] type 0 class 0x000700
[ 3869.611003] pci 0000:11:00.0: reg 10: [io 0x0000-0x0007]
[ 3869.611275] pci 0000:11:00.0: reg 14: [mem 0x00000000-0x00000fff]
[ 3869.611917] pci 0000:11:00.0: reg 24: [mem 0x00000000-0x00000fff]
[ 3869.612691] pci 0000:11:00.0: PME# supported from D3hot D3cold
[ 3869.613163] pci 0000:11:00.1: [9710:9912] type 0 class 0x000700
[ 3869.613280] pci 0000:11:00.1: reg 10: [io 0x0000-0x0007]
[ 3869.613406] pci 0000:11:00.1: reg 14: [mem 0x00000000-0x00000fff]
[ 3869.613800] pci 0000:11:00.1: reg 24: [mem 0x00000000-0x00000fff]
[ 3869.614502] pci 0000:11:00.1: PME# supported from D3hot D3cold
[ 3869.614952] pci 0000:11:00.2: [9710:9912] type 0 class 0x000701
[ 3869.615112] pci 0000:11:00.2: reg 10: [io 0x0000-0x0007]
[ 3869.615191] pci 0000:11:00.2: reg 14: [io 0x0000-0x0007]
[ 3869.615282] pci 0000:11:00.2: reg 18: [mem 0x00000000-0x00000fff]
[ 3869.615683] pci 0000:11:00.2: reg 24: [mem 0x00000000-0x00000fff]
[ 3869.616440] pci 0000:11:00.2: PME# supported from D3hot D3cold
[ 3869.670705] pci 0000:11:00.0: BAR 1: assigned [mem 0xf6c00000-0xf6c00fff]
[ 3869.670725] pci 0000:11:00.0: BAR 5: assigned [mem 0xf6c01000-0xf6c01fff]
[ 3869.670750] pci 0000:11:00.1: BAR 1: assigned [mem 0xf6c02000-0xf6c02fff]
[ 3869.670776] pci 0000:11:00.1: BAR 5: assigned [mem 0xf6c03000-0xf6c03fff]
[ 3869.670840] pci 0000:11:00.2: BAR 2: assigned [mem 0xf6c04000-0xf6c04fff]
[ 3869.670866] pci 0000:11:00.2: BAR 5: assigned [mem 0xf6c05000-0xf6c05fff]
[ 3869.670885] pci 0000:11:00.0: BAR 0: assigned [io 0xc000-0xc007]
[ 3869.670918] pci 0000:11:00.1: BAR 0: assigned [io 0xc008-0xc00f]
[ 3869.670956] pci 0000:11:00.2: BAR 0: assigned [io 0xc010-0xc017]
[ 3869.670988] pci 0000:11:00.2: BAR 1: assigned [io 0xc018-0xc01f]
[ 3869.671008] pcieport 0000:00:1c.7: PCI bridge to [bus 11-16]
[ 3869.671011] pcieport 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
[ 3869.671016] pcieport 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff]
[ 3869.671021] pcieport 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
[ 3869.671380] serial 0000:11:00.0: enabling device (0100 -> 0103)
[ 3869.716018] 0000:11:00.0: ttyS0 at I/O 0xc000 (irq = 19) is a ST16650V2
[ 3869.716672] serial 0000:11:00.1: enabling device (0100 -> 0103)
[ 3869.759172] 0000:11:00.1: ttyS1 at I/O 0xc008 (irq = 16) is a ST16650V2
[ 3869.759831] parport_serial 0000:11:00.2: enabling device (0100 -> 0103)
[ 3869.760568] parport0: PC-style at 0xc010 (0xc018), irq 17, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
>
> The card is AXAGO ECA-SP (2xRS232 and 1xIEEE1234) used these drivers and should be based on MosChip9901 :
>
> parport_serial 7071 0
> ppdev 5670 0
> parport_pc 29557 1 parport_serial
> parport 32353 2 ppdev,parport_pc
>
>
> Interesting, some months ago I had to patch the kernel but now it is recognized
> by vanilla kernel? I do not have compiled for this kernel the 99xx module yet.
> Hmm?
>
> # ls -la Axago_drivers_CDROM_v1.09/ECA-Px_Sx/Linux/MCS99XX_NonCascade/
> total 1052
> dr-xr-xr-x 3 root root 4096 Feb 12 23:20 .
> dr-xr-xr-x 4 root root 4096 Oct 8 2011 ..
> -rw-r--r-- 1 root root 394 Feb 12 23:20 .99xx.ko.cmd
> -rw-r--r-- 1 root root 23665 Feb 12 23:20 .99xx.mod.o.cmd
> -rw-r--r-- 1 root root 35989 Feb 12 23:20 .99xx.o.cmd
> drwxr-xr-x 2 root root 4096 Feb 12 23:20 .tmp_versions
> -r-xr-xr-x 1 root root 69578 Feb 24 2011 99xx.c
> -r-xr-xr-x 1 root root 5499 Feb 24 2011 99xx.h
> -rw-r--r-- 1 root root 431305 Feb 12 23:20 99xx.ko
> -rw-r--r-- 1 root root 2033 Feb 12 23:20 99xx.mod.c
> -rw-r--r-- 1 root root 54760 Feb 12 23:20 99xx.mod.o
> -rw-r--r-- 1 root root 378280 Feb 12 23:20 99xx.o
> -r-xr-xr-x 1 root root 1141 Mar 7 2011 99xx_ReleaseNotes
> -r-xr-xr-x 1 root root 1108 Feb 8 00:05 Makefile
> -r-xr-xr-x 1 root root 1045 Feb 8 00:04 Makefile.ori
> -rw-r--r-- 1 root root 0 Feb 12 23:20 Module.symvers
> -r-xr-xr-x 1 root root 88 Mar 8 2011 mcs99xx
> -rw-r--r-- 1 root root 82 Feb 12 23:20 modules.order
> -r-xr-xr-x 1 root root 2802 Feb 24 2011 readme
> -r-xr-xr-x 1 root root 2521 Feb 24 2011 testreport
> #
>
>
> http://izto.org/mcs9865/
> http://forums.gentoo.org/viewtopic-p-6949842.html
>
>
> 11:00.2 Parallel controller [0701]: NetMos Technology Device [9710:9912] (prog-if 03 [IEEE1284])
> Subsystem: Device [a000:2000]
> Physical Slot: 7
> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Interrupt: pin C routed to IRQ 17
> Region 0: I/O ports at c010 [size=8]
> Region 1: I/O ports at c018 [size=8]
> Region 2: Memory at f6c04000 (32-bit, non-prefetchable) [size=4K]
> Region 5: Memory at f6c05000 (32-bit, non-prefetchable) [size=4K]
> Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
> Address: 0000000000000000 Data: 0000
> Capabilities: [78] Power Management version 3
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
> Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [80] Express (v1) Legacy Endpoint, MSI 00
> DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <1us, L1 <2us
> ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> MaxPayload 128 bytes, MaxReadReq 512 bytes
> DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
> LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <64ns, L1 unlimited
> ClockPM+ Surprise- LLActRep- BwNot-
> LnkCtl: ASPM L0s Enabled; RCB 64 bytes Disabled- Retrain- CommClk-
> ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
> Capabilities: [100 v1] Advanced Error Reporting
> UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
> CESta: RxErr+ BadTLP- BadDLLP- Rollover+ Timeout+ NonFatalErr+
> CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
> AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
> Kernel driver in use: parport_serial
> Kernel modules: parport_serial
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pci" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
>
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: 3.2.11: PCI Express card cannot be re-detected withing cca 60sec timeframe
[not found] ` <4F8C6E4E.1000205@fold.natur.cuni.cz>
@ 2012-04-16 20:53 ` Yinghai Lu
2012-04-17 1:42 ` Yinghai Lu
0 siblings, 1 reply; 55+ messages in thread
From: Yinghai Lu @ 2012-04-16 20:53 UTC (permalink / raw)
To: Martin Mokrejs, Thomas Gleixner; +Cc: linux-pci, Linux Kernel Mailing List
On Mon, Apr 16, 2012 at 12:09 PM, Martin Mokrejs
<mmokrejs@fold.natur.cuni.cz> wrote:
> Yinghai Lu wrote:
>> On Mon, Apr 16, 2012 at 2:49 AM, Martin Mokrejs
>> <mmokrejs@fold.natur.cuni.cz> wrote:
>>> Hi Yinghai,
>>>
>>> Yinghai Lu wrote:
>>>> On Wed, Mar 21, 2012 at 3:46 PM, Martin Mokrejs
>>> I had some Ooopses with 3.4-rc2 but now I have tested 3.4-rc3. Still, linux
>>> does NOT realize that I have removed an ExpressCard from the slot. It realizes
>>> that only when I pluging the card back again. Actually, this is a case of a
>>> NEC chipset base USB3.0 card.
>>>
>>> In contrast, kernel DOES recognize that I unplugged a FireWire card from the
>>> same slot.
>>>
>>> This is a Dell Vostro 3550 laptop. Below is what syslog logged with my comment.
>>> Empty lines between the log entries are inserted whe I either inserted or removed
>>> a card. Probably a bit more will be in the attached dmesg file.
>>>
>
> [cut]
>
>>
>> please check boot with pciehp.pciehp_debug=1
>>
>> also you could use tail -f /var/log/messages to get more timely outputs.
>
>
> I do not see anything extra logged during those INSERT/REMOVE attempts. Yes, there is somethiung
> in dmesg logged in addition when the machine booted up.
>
>
> INSERTING THE USB3.0 CARD FOR THE FIRST TIME AFTER BOOTUP
>
> Apr 16 20:40:32 vostro kernel: [ 419.776551] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
> Apr 16 20:40:33 vostro kernel: [ 420.798623] pci 0000:11:00.0: BAR 0: assigned [mem 0xf6c00000-0xf6c01fff 64bit]
> Apr 16 20:40:33 vostro kernel: [ 420.798657] pcieport 0000:00:1c.7: PCI bridge to [bus 11-16]
> Apr 16 20:40:33 vostro kernel: [ 420.798666] pcieport 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
> Apr 16 20:40:33 vostro kernel: [ 420.798678] pcieport 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff]
> Apr 16 20:40:33 vostro kernel: [ 420.798689] pcieport 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
> Apr 16 20:40:33 vostro kernel: [ 420.798827] xhci_hcd 0000:11:00.0: enabling device (0100 -> 0102)
> Apr 16 20:40:33 vostro kernel: [ 420.798882] xhci_hcd 0000:11:00.0: xHCI Host Controller
> Apr 16 20:40:33 vostro kernel: [ 420.798930] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 5
> Apr 16 20:40:33 vostro kernel: [ 420.799256] xhci_hcd 0000:11:00.0: irq 19, io mem 0xf6c00000
> Apr 16 20:40:33 vostro kernel: [ 420.799547] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
> Apr 16 20:40:33 vostro kernel: [ 420.799548] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> Apr 16 20:40:33 vostro kernel: [ 420.799549] usb usb5: Product: xHCI Host Controller
> Apr 16 20:40:33 vostro kernel: [ 420.799551] usb usb5: Manufacturer: Linux 3.3.2-default xhci_hcd
> Apr 16 20:40:33 vostro kernel: [ 420.799552] usb usb5: SerialNumber: 0000:11:00.0
> Apr 16 20:40:33 vostro kernel: [ 420.799654] hub 5-0:1.0: USB hub found
> Apr 16 20:40:33 vostro kernel: [ 420.799666] hub 5-0:1.0: 2 ports detected
> Apr 16 20:40:33 vostro kernel: [ 420.799726] xhci_hcd 0000:11:00.0: xHCI Host Controller
> Apr 16 20:40:33 vostro kernel: [ 420.799757] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 6
> Apr 16 20:40:33 vostro kernel: [ 420.802464] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
> Apr 16 20:40:33 vostro kernel: [ 420.802466] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> Apr 16 20:40:33 vostro kernel: [ 420.802468] usb usb6: Product: xHCI Host Controller
> Apr 16 20:40:33 vostro kernel: [ 420.802470] usb usb6: Manufacturer: Linux 3.3.2-default xhci_hcd
> Apr 16 20:40:33 vostro kernel: [ 420.802471] usb usb6: SerialNumber: 0000:11:00.0
> Apr 16 20:40:33 vostro kernel: [ 420.802632] hub 6-0:1.0: USB hub found
> Apr 16 20:40:33 vostro kernel: [ 420.802651] hub 6-0:1.0: 2 ports detected
>
> REMOVED THE USB3.0 CARD
>
> RE-INSERTING THE USB3.0 CARD
>
> Apr 16 20:40:44 vostro kernel: [ 431.946895] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
> Apr 16 20:40:44 vostro kernel: [ 431.947148] xhci_hcd 0000:11:00.0: remove, state 4
> Apr 16 20:40:44 vostro kernel: [ 431.947152] usb usb6: USB disconnect, device number 1
> Apr 16 20:40:44 vostro kernel: [ 431.947331] xhci_hcd 0000:11:00.0: USB bus 6 deregistered
> Apr 16 20:40:44 vostro kernel: [ 431.947398] xhci_hcd 0000:11:00.0: remove, state 4
> Apr 16 20:40:44 vostro kernel: [ 431.947402] usb usb5: USB disconnect, device number 1
> Apr 16 20:40:44 vostro kernel: [ 431.947642] xhci_hcd 0000:11:00.0: USB bus 5 deregistered
> Apr 16 20:40:44 vostro kernel: [ 431.968146] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
> Apr 16 20:40:45 vostro kernel: [ 432.990453] pci 0000:11:00.0: BAR 0: assigned [mem 0xf6c00000-0xf6c01fff 64bit]
> Apr 16 20:40:45 vostro kernel: [ 432.990487] pcieport 0000:00:1c.7: PCI bridge to [bus 11-16]
> Apr 16 20:40:45 vostro kernel: [ 432.990496] pcieport 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
> Apr 16 20:40:45 vostro kernel: [ 432.990509] pcieport 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff]
> Apr 16 20:40:45 vostro kernel: [ 432.990520] pcieport 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
> Apr 16 20:40:45 vostro kernel: [ 432.990649] xhci_hcd 0000:11:00.0: enabling device (0100 -> 0102)
> Apr 16 20:40:45 vostro kernel: [ 432.990685] xhci_hcd 0000:11:00.0: xHCI Host Controller
> Apr 16 20:40:45 vostro kernel: [ 432.990723] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 5
> Apr 16 20:40:45 vostro kernel: [ 432.991014] xhci_hcd 0000:11:00.0: irq 19, io mem 0xf6c00000
> Apr 16 20:40:45 vostro kernel: [ 432.991354] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
> Apr 16 20:40:45 vostro kernel: [ 432.991357] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> Apr 16 20:40:45 vostro kernel: [ 432.991359] usb usb5: Product: xHCI Host Controller
> Apr 16 20:40:45 vostro kernel: [ 432.991360] usb usb5: Manufacturer: Linux 3.3.2-default xhci_hcd
> Apr 16 20:40:45 vostro kernel: [ 432.991362] usb usb5: SerialNumber: 0000:11:00.0
> Apr 16 20:40:45 vostro kernel: [ 432.991511] hub 5-0:1.0: USB hub found
> Apr 16 20:40:45 vostro kernel: [ 432.991523] hub 5-0:1.0: 2 ports detected
> Apr 16 20:40:45 vostro kernel: [ 432.991604] xhci_hcd 0000:11:00.0: xHCI Host Controller
> Apr 16 20:40:45 vostro kernel: [ 432.991678] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 6
> Apr 16 20:40:45 vostro kernel: [ 432.994264] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
> Apr 16 20:40:45 vostro kernel: [ 432.994266] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> Apr 16 20:40:45 vostro kernel: [ 432.994268] usb usb6: Product: xHCI Host Controller
> Apr 16 20:40:45 vostro kernel: [ 432.994269] usb usb6: Manufacturer: Linux 3.3.2-default xhci_hcd
> Apr 16 20:40:45 vostro kernel: [ 432.994270] usb usb6: SerialNumber: 0000:11:00.0
> Apr 16 20:40:45 vostro kernel: [ 432.994431] hub 6-0:1.0: USB hub found
> Apr 16 20:40:45 vostro kernel: [ 432.994449] hub 6-0:1.0: 2 ports detected
>
so the interrupt for removal get generated, but pcie_isr() is delayed
when another surprise is generated...
could be threaded_irq changes related. Thomas ?
>
> INSERTING THE FireWire CARD
>
> Apr 16 20:41:27 vostro kernel: [ 474.869403] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
> Apr 16 20:41:27 vostro kernel: [ 474.869657] xhci_hcd 0000:11:00.0: remove, state 4
> Apr 16 20:41:27 vostro kernel: [ 474.869661] usb usb6: USB disconnect, device number 1
> Apr 16 20:41:27 vostro kernel: [ 474.869809] xhci_hcd 0000:11:00.0: USB bus 6 deregistered
> Apr 16 20:41:27 vostro kernel: [ 474.869852] xhci_hcd 0000:11:00.0: remove, state 4
> Apr 16 20:41:27 vostro kernel: [ 474.869857] usb usb5: USB disconnect, device number 1
> Apr 16 20:41:27 vostro kernel: [ 474.870049] xhci_hcd 0000:11:00.0: USB bus 5 deregistered
> Apr 16 20:41:27 vostro kernel: [ 474.878567] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
> Apr 16 20:41:28 vostro kernel: [ 475.906546] pci 0000:11:00.0: BAR 0: assigned [mem 0xf6c00000-0xf6c007ff 64bit]
> Apr 16 20:41:28 vostro kernel: [ 475.906570] pci 0000:11:00.0: BAR 2: assigned [io 0xc000-0xc0ff]
> Apr 16 20:41:28 vostro kernel: [ 475.906584] pcieport 0000:00:1c.7: PCI bridge to [bus 11-16]
> Apr 16 20:41:28 vostro kernel: [ 475.906592] pcieport 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
> Apr 16 20:41:28 vostro kernel: [ 475.906605] pcieport 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff]
> Apr 16 20:41:28 vostro kernel: [ 475.906627] pcieport 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
> Apr 16 20:41:28 vostro kernel: [ 475.986838] firewire_ohci 0000:11:00.0: enabling device (0100 -> 0103)
> Apr 16 20:41:29 vostro kernel: [ 476.066286] firewire_ohci: Added fw-ohci device 0000:11:00.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x11
> Apr 16 20:41:29 vostro kernel: [ 476.565663] firewire_core: created device fw0: GUID 0011066600000003, S400
>
>
> REMOVING FireWire CARD
>
>
> Apr 16 20:41:39 vostro kernel: [ 486.621576] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
> Apr 16 20:41:39 vostro kernel: [ 486.621984] firewire_ohci: Removed fw-ohci device.
>
this card is not delayed.
Yinghai
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: 3.2.11: PCI Express card cannot be re-detected withing cca 60sec timeframe
2012-04-16 19:39 ` Martin Mokrejs
2012-04-16 19:45 ` Martin Mokrejs
@ 2012-04-16 21:04 ` Yinghai Lu
2012-04-17 8:56 ` Martin Mokrejs
1 sibling, 1 reply; 55+ messages in thread
From: Yinghai Lu @ 2012-04-16 21:04 UTC (permalink / raw)
To: Martin Mokrejs; +Cc: linux-pci
On Mon, Apr 16, 2012 at 12:39 PM, Martin Mokrejs
<mmokrejs@fold.natur.cuni.cz> wrote:
> Yinghai Lu wrote:
>> On Mon, Apr 16, 2012 at 2:49 AM, Martin Mokrejs
>> <mmokrejs@fold.natur.cuni.cz> wrote:
>>> Hi Yinghai,
>>>
>>> Yinghai Lu wrote:
>>>> On Wed, Mar 21, 2012 at 3:46 PM, Martin Mokrejs
>>> I had some Ooopses with 3.4-rc2 but now I have tested 3.4-rc3. Still, linux
>>> does NOT realize that I have removed an ExpressCard from the slot. It realizes
>>> that only when I pluging the card back again. Actually, this is a case of a
>>> NEC chipset base USB3.0 card.
>>>
>>> In contrast, kernel DOES recognize that I unplugged a FireWire card from the
>>> same slot.
>>>
>>> This is a Dell Vostro 3550 laptop. Below is what syslog logged with my comment.
>>> Empty lines between the log entries are inserted whe I either inserted or removed
>>> a card. Probably a bit more will be in the attached dmesg file.
>
> [cut]
>
>> please check boot with pciehp.pciehp_debug=1
>>
>> also you could use tail -f /var/log/messages to get more timely outputs.
>
> I tried the third Express Card I do have here. It is probably the most interesting
> to play with. ;) It plugs somehow weirdly into the slot. I somehow have to push it in
> and a little bit pull out so that some mechanical lock catches the card. But, it allocated
> resources only once, and in other cases the driver is somehow locked up. It could be
> a driver issue but I think it is interesting information in this moment. Below I leave
> always 3 empty lines to emphasize I was pulling out the card and after a while back in
> (like in previous attempts). The output is just the one from dmesg, it is more detailed
> then what is logged through syslogd.
>
>
>
>
> [ 2784.573629] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 8
> [ 2784.573631] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
> [ 2784.573644] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
> [ 2784.573669] pciehp 0000:00:1c.7:pcie04: Surprise Removal
> [ 2785.580455] pciehp 0000:00:1c.7:pcie04: pciehp_check_link_status: lnk_status = 7811
> [ 2785.580464] pciehp 0000:00:1c.7:pcie04: Link Training Error occurs
> [ 2785.580470] pciehp 0000:00:1c.7:pcie04: Failed to check link status
good, link can not be trained in 1s.
> [ 2788.317351] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 8
> [ 2788.317360] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
> [ 2788.317369] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
> [ 2788.317412] pciehp 0000:00:1c.7:pcie04: Surprise Removal
> [ 2788.317570] pciehp 0000:00:1c.7:pcie04: Disabling domain:bus:device=0000:11:00
> [ 2788.317572] pciehp 0000:00:1c.7:pcie04: pciehp_unconfigure_device: domain:bus:dev = 0000:11:00
looks removal isr get delay too.
> [ 2788.799777] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 8
> [ 2788.799779] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
> [ 2788.799782] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
> [ 2788.799802] pciehp 0000:00:1c.7:pcie04: Surprise Removal
> [ 2789.804129] pciehp 0000:00:1c.7:pcie04: pciehp_check_link_status: lnk_status = 7011
> [ 2789.804399] pci 0000:11:00.0: [9710:9912] type 0 class 0x000700
> [ 2789.804610] pci 0000:11:00.0: reg 10: [io 0x0000-0x0007]
> [ 2789.804743] pci 0000:11:00.0: reg 14: [mem 0x00000000-0x00000fff]
> [ 2789.805193] pci 0000:11:00.0: reg 24: [mem 0x00000000-0x00000fff]
> [ 2789.805976] pci 0000:11:00.0: PME# supported from D3hot D3cold
> [ 2789.806397] pci 0000:11:00.1: [9710:9912] type 0 class 0x000700
> [ 2789.806618] pci 0000:11:00.1: reg 10: [io 0x0000-0x0007]
> [ 2789.806802] pci 0000:11:00.1: reg 14: [mem 0x00000000-0x00000fff]
> [ 2789.808796] pci 0000:11:00.1: reg 24: [mem 0x00000000-0x00000fff]
> [ 2789.809452] pci 0000:11:00.1: PME# supported from D3hot D3cold
> [ 2789.809800] pci 0000:11:00.2: [9710:9912] type 0 class 0x000701
> [ 2789.809955] pci 0000:11:00.2: reg 10: [io 0x0000-0x0007]
> [ 2789.810086] pci 0000:11:00.2: reg 14: [io 0x0000-0x0007]
> [ 2789.810165] pci 0000:11:00.2: reg 18: [mem 0x00000000-0x00000fff]
> [ 2789.810523] pci 0000:11:00.2: reg 24: [mem 0x00000000-0x00000fff]
> [ 2789.811273] pci 0000:11:00.2: PME# supported from D3hot D3cold
> [ 2789.864174] pci 0000:11:00.0: BAR 1: assigned [mem 0xf6c00000-0xf6c00fff]
> [ 2789.864199] pci 0000:11:00.0: BAR 5: assigned [mem 0xf6c01000-0xf6c01fff]
> [ 2789.864224] pci 0000:11:00.1: BAR 1: assigned [mem 0xf6c02000-0xf6c02fff]
> [ 2789.864250] pci 0000:11:00.1: BAR 5: assigned [mem 0xf6c03000-0xf6c03fff]
> [ 2789.864294] pci 0000:11:00.2: BAR 2: assigned [mem 0xf6c04000-0xf6c04fff]
> [ 2789.864339] pci 0000:11:00.2: BAR 5: assigned [mem 0xf6c05000-0xf6c05fff]
> [ 2789.864396] pci 0000:11:00.0: BAR 0: assigned [io 0xc000-0xc007]
> [ 2789.864461] pci 0000:11:00.1: BAR 0: assigned [io 0xc008-0xc00f]
> [ 2789.864535] pci 0000:11:00.2: BAR 0: assigned [io 0xc010-0xc017]
> [ 2789.864614] pci 0000:11:00.2: BAR 1: assigned [io 0xc018-0xc01f]
> [ 2789.864640] pcieport 0000:00:1c.7: PCI bridge to [bus 11-16]
> [ 2789.864643] pcieport 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
> [ 2789.864648] pcieport 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff]
> [ 2789.864652] pcieport 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
> [ 2789.864953] serial 0000:11:00.0: enabling device (0100 -> 0103)
> [ 2789.910711] 0000:11:00.0: ttyS0 at I/O 0xc000 (irq = 19) is a ST16650V2
> [ 2789.911900] serial 0000:11:00.1: enabling device (0100 -> 0103)
> [ 2789.953869] 0000:11:00.1: ttyS1 at I/O 0xc008 (irq = 16) is a ST16650V2
> [ 2790.018840] ppdev: user-space parallel port driver
> [ 2790.020038] parport_serial 0000:11:00.2: enabling device (0100 -> 0103)
> [ 2790.020647] parport0: PC-style at 0xc010 (0xc018), irq 17, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
>
>
> [ 2839.728485] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 8
> [ 2839.728494] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
> [ 2839.728503] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
> [ 2839.728546] pciehp 0000:00:1c.7:pcie04: Surprise Removal
> [ 2839.728710] pciehp 0000:00:1c.7:pcie04: Disabling domain:bus:device=0000:11:00
> [ 2839.728712] pciehp 0000:00:1c.7:pcie04: pciehp_unconfigure_device: domain:bus:dev = 0000:11:00
not delayed.
>
>
> [ 2859.890589] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 8
> [ 2859.890602] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
> [ 2859.890605] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
> [ 2859.890631] pciehp 0000:00:1c.7:pcie04: Surprise Removal
> [ 2860.897910] pciehp 0000:00:1c.7:pcie04: pciehp_check_link_status: lnk_status = 7811
> [ 2860.897919] pciehp 0000:00:1c.7:pcie04: Link Training Error occurs
> [ 2860.897925] pciehp 0000:00:1c.7:pcie04: Failed to check link status
link training failed again.
> [ 2860.907011] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 8
> [ 2860.907019] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
> [ 2860.907028] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
> [ 2860.907073] pciehp 0000:00:1c.7:pcie04: Surprise Removal
> [ 2860.907209] pciehp 0000:00:1c.7:pcie04: Disabling domain:bus:device=0000:11:00
> [ 2860.907211] pciehp 0000:00:1c.7:pcie04: pciehp_unconfigure_device: domain:bus:dev = 0000:11:00
removal isr get delayed.
> [ 2861.242654] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 8
> [ 2861.242656] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
> [ 2861.242669] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
> [ 2861.242684] pciehp 0000:00:1c.7:pcie04: Surprise Removal
> [ 2862.245893] pciehp 0000:00:1c.7:pcie04: pciehp_check_link_status: lnk_status = 7811
> [ 2862.245902] pciehp 0000:00:1c.7:pcie04: Link Training Error occurs
> [ 2862.245908] pciehp 0000:00:1c.7:pcie04: Failed to check link status
>
>
> [ 2900.516939] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 8
> [ 2900.516948] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
> [ 2900.516957] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
> [ 2900.516999] pciehp 0000:00:1c.7:pcie04: Surprise Removal
> [ 2900.517170] pciehp 0000:00:1c.7:pcie04: Disabling domain:bus:device=0000:11:00
> [ 2900.517172] pciehp 0000:00:1c.7:pcie04: pciehp_unconfigure_device: domain:bus:dev = 0000:11:00
>
>
> [ 2917.473608] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 8
> [ 2917.473610] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
> [ 2917.473624] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
> [ 2917.473649] pciehp 0000:00:1c.7:pcie04: Surprise Removal
> [ 2918.481860] pciehp 0000:00:1c.7:pcie04: pciehp_check_link_status: lnk_status = 7811
> [ 2918.481869] pciehp 0000:00:1c.7:pcie04: Link Training Error occurs
> [ 2918.481875] pciehp 0000:00:1c.7:pcie04: Failed to check link status
>
>
> [ 2962.382234] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 8
> [ 2962.382244] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
> [ 2962.382253] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
> [ 2962.382283] pciehp 0000:00:1c.7:pcie04: Surprise Removal
> [ 2962.382446] pciehp 0000:00:1c.7:pcie04: Disabling domain:bus:device=0000:11:00
> [ 2962.382448] pciehp 0000:00:1c.7:pcie04: pciehp_unconfigure_device: domain:bus:dev = 0000:11:00
> [ 2991.261907] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 8
> [ 2991.261920] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
> [ 2991.261923] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
> [ 2991.261943] pciehp 0000:00:1c.7:pcie04: Surprise Removal
> [ 2992.261621] pciehp 0000:00:1c.7:pcie04: pciehp_check_link_status: lnk_status = 7811
> [ 2992.261630] pciehp 0000:00:1c.7:pcie04: Link Training Error occurs
> [ 2992.261636] pciehp 0000:00:1c.7:pcie04: Failed to check link status
>
>
> [ 3010.910120] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 8
> [ 3010.910129] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
> [ 3010.910138] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
> [ 3010.910180] pciehp 0000:00:1c.7:pcie04: Surprise Removal
> [ 3010.910346] pciehp 0000:00:1c.7:pcie04: Disabling domain:bus:device=0000:11:00
> [ 3010.910348] pciehp 0000:00:1c.7:pcie04: pciehp_unconfigure_device: domain:bus:dev = 0000:11:00
>
You can try to set express card speed from Auto to Gen1 in your BIOS setup.
>
> The card is AXAGO ECA-SP (2xRS232 and 1xIEEE1234) used these drivers and should be based on MosChip9901 :
>
> parport_serial 7071 0
> ppdev 5670 0
> parport_pc 29557 1 parport_serial
> parport 32353 2 ppdev,parport_pc
>
>
> Interesting, some months ago I had to patch the kernel but now it is recognized
> by vanilla kernel? I do not have compiled for this kernel the 99xx module yet.
> Hmm?
>
> # ls -la Axago_drivers_CDROM_v1.09/ECA-Px_Sx/Linux/MCS99XX_NonCascade/
> total 1052
> dr-xr-xr-x 3 root root 4096 Feb 12 23:20 .
> dr-xr-xr-x 4 root root 4096 Oct 8 2011 ..
> -rw-r--r-- 1 root root 394 Feb 12 23:20 .99xx.ko.cmd
> -rw-r--r-- 1 root root 23665 Feb 12 23:20 .99xx.mod.o.cmd
> -rw-r--r-- 1 root root 35989 Feb 12 23:20 .99xx.o.cmd
> drwxr-xr-x 2 root root 4096 Feb 12 23:20 .tmp_versions
> -r-xr-xr-x 1 root root 69578 Feb 24 2011 99xx.c
> -r-xr-xr-x 1 root root 5499 Feb 24 2011 99xx.h
> -rw-r--r-- 1 root root 431305 Feb 12 23:20 99xx.ko
> -rw-r--r-- 1 root root 2033 Feb 12 23:20 99xx.mod.c
> -rw-r--r-- 1 root root 54760 Feb 12 23:20 99xx.mod.o
> -rw-r--r-- 1 root root 378280 Feb 12 23:20 99xx.o
> -r-xr-xr-x 1 root root 1141 Mar 7 2011 99xx_ReleaseNotes
> -r-xr-xr-x 1 root root 1108 Feb 8 00:05 Makefile
> -r-xr-xr-x 1 root root 1045 Feb 8 00:04 Makefile.ori
> -rw-r--r-- 1 root root 0 Feb 12 23:20 Module.symvers
> -r-xr-xr-x 1 root root 88 Mar 8 2011 mcs99xx
> -rw-r--r-- 1 root root 82 Feb 12 23:20 modules.order
> -r-xr-xr-x 1 root root 2802 Feb 24 2011 readme
> -r-xr-xr-x 1 root root 2521 Feb 24 2011 testreport
> #
>
>
> http://izto.org/mcs9865/
> http://forums.gentoo.org/viewtopic-p-6949842.html
>
>
> 11:00.2 Parallel controller [0701]: NetMos Technology Device [9710:9912] (prog-if 03 [IEEE1284])
> Subsystem: Device [a000:2000]
> Physical Slot: 7
> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Interrupt: pin C routed to IRQ 17
> Region 0: I/O ports at c010 [size=8]
> Region 1: I/O ports at c018 [size=8]
> Region 2: Memory at f6c04000 (32-bit, non-prefetchable) [size=4K]
> Region 5: Memory at f6c05000 (32-bit, non-prefetchable) [size=4K]
> Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
> Address: 0000000000000000 Data: 0000
> Capabilities: [78] Power Management version 3
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
> Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [80] Express (v1) Legacy Endpoint, MSI 00
> DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <1us, L1 <2us
> ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> MaxPayload 128 bytes, MaxReadReq 512 bytes
> DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
corrected error
> LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <64ns, L1 unlimited
> ClockPM+ Surprise- LLActRep- BwNot-
> LnkCtl: ASPM L0s Enabled; RCB 64 bytes Disabled- Retrain- CommClk-
> ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
> Capabilities: [100 v1] Advanced Error Reporting
> UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
> CESta: RxErr+ BadTLP- BadDLLP- Rollover+ Timeout+ NonFatalErr+
errors..
> CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
> AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
> Kernel driver in use: parport_serial
> Kernel modules: parport_serial
>
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: 3.2.11: PCI Express card cannot be re-detected withing cca 60sec timeframe
2012-04-16 20:53 ` Yinghai Lu
@ 2012-04-17 1:42 ` Yinghai Lu
2012-04-17 2:48 ` Yinghai Lu
0 siblings, 1 reply; 55+ messages in thread
From: Yinghai Lu @ 2012-04-17 1:42 UTC (permalink / raw)
To: Martin Mokrejs, Thomas Gleixner; +Cc: linux-pci, Linux Kernel Mailing List
[-- Attachment #1: Type: text/plain, Size: 1516 bytes --]
On Mon, Apr 16, 2012 at 1:53 PM, Yinghai Lu <yinghai@kernel.org> wrote:
> On Mon, Apr 16, 2012 at 12:09 PM, Martin Mokrejs
> <mmokrejs@fold.natur.cuni.cz> wrote:
>>>>> On Wed, Mar 21, 2012 at 3:46 PM, Martin Mokrejs
>>>> I had some Ooopses with 3.4-rc2 but now I have tested 3.4-rc3. Still, linux
>>>> does NOT realize that I have removed an ExpressCard from the slot. It realizes
>>>> that only when I pluging the card back again. Actually, this is a case of a
>>>> NEC chipset base USB3.0 card.
>>>>
>>>> In contrast, kernel DOES recognize that I unplugged a FireWire card from the
>>>> same slot.
>>>>
>>>> This is a Dell Vostro 3550 laptop. Below is what syslog logged with my comment.
>>>> Empty lines between the log entries are inserted whe I either inserted or removed
>>>> a card. Probably a bit more will be in the attached dmesg file.
>
> so the interrupt for removal get generated, but pcie_isr() is delayed
> when another surprise is generated...
>
please try to revert
commit 486b10b9f43500741cd63a878d0ef23cd87fc66d
Author: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Date: Mon Nov 7 20:56:50 2011 +0900
PCI: pciehp: Handle push button event asynchronously
Use non-ordered workqueue for attention button events.
Attention button events on each slot can be handled asynchronously. So
we should use non-ordered workqueue. This patch also removes ordered
workqueue in pciehp as a result.
to see if there is any difference.
Yinghai
[-- Attachment #2: commit-486b10b --]
[-- Type: application/octet-stream, Size: 3505 bytes --]
commit 486b10b9f43500741cd63a878d0ef23cd87fc66d
Author: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Date: Mon Nov 7 20:56:50 2011 +0900
PCI: pciehp: Handle push button event asynchronously
Use non-ordered workqueue for attention button events.
Attention button events on each slot can be handled asynchronously. So
we should use non-ordered workqueue. This patch also removes ordered
workqueue in pciehp as a result.
Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
diff --git a/drivers/pci/hotplug/pciehp.h b/drivers/pci/hotplug/pciehp.h
index 838f571..9a33fdd 100644
--- a/drivers/pci/hotplug/pciehp.h
+++ b/drivers/pci/hotplug/pciehp.h
@@ -45,7 +45,6 @@ extern int pciehp_poll_time;
extern int pciehp_debug;
extern int pciehp_force;
extern struct workqueue_struct *pciehp_wq;
-extern struct workqueue_struct *pciehp_ordered_wq;
#define dbg(format, arg...) \
do { \
diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c
index a13ad13..b8c99d3 100644
--- a/drivers/pci/hotplug/pciehp_core.c
+++ b/drivers/pci/hotplug/pciehp_core.c
@@ -43,7 +43,6 @@ int pciehp_poll_mode;
int pciehp_poll_time;
int pciehp_force;
struct workqueue_struct *pciehp_wq;
-struct workqueue_struct *pciehp_ordered_wq;
#define DRIVER_VERSION "0.4"
#define DRIVER_AUTHOR "Dan Zink <dan.zink@compaq.com>, Greg Kroah-Hartman <greg@kroah.com>, Dely Sy <dely.l.sy@intel.com>"
@@ -345,18 +344,11 @@ static int __init pcied_init(void)
if (!pciehp_wq)
return -ENOMEM;
- pciehp_ordered_wq = alloc_ordered_workqueue("pciehp_ordered", 0);
- if (!pciehp_ordered_wq) {
- destroy_workqueue(pciehp_wq);
- return -ENOMEM;
- }
-
pciehp_firmware_init();
retval = pcie_port_service_register(&hpdriver_portdrv);
dbg("pcie_port_service_register = %d\n", retval);
info(DRIVER_DESC " version: " DRIVER_VERSION "\n");
if (retval) {
- destroy_workqueue(pciehp_ordered_wq);
destroy_workqueue(pciehp_wq);
dbg("Failure to register service\n");
}
@@ -367,7 +359,6 @@ static void __exit pcied_cleanup(void)
{
dbg("unload_pciehpd()\n");
pcie_port_service_unregister(&hpdriver_portdrv);
- destroy_workqueue(pciehp_ordered_wq);
destroy_workqueue(pciehp_wq);
info(DRIVER_DESC " version: " DRIVER_VERSION " unloaded\n");
}
diff --git a/drivers/pci/hotplug/pciehp_ctrl.c b/drivers/pci/hotplug/pciehp_ctrl.c
index 085dbb5..27f4429 100644
--- a/drivers/pci/hotplug/pciehp_ctrl.c
+++ b/drivers/pci/hotplug/pciehp_ctrl.c
@@ -344,7 +344,7 @@ void pciehp_queue_pushbutton_work(struct work_struct *work)
kfree(info);
goto out;
}
- queue_work(pciehp_ordered_wq, &info->work);
+ queue_work(pciehp_wq, &info->work);
out:
mutex_unlock(&p_slot->lock);
}
@@ -439,7 +439,7 @@ static void handle_surprise_event(struct slot *p_slot)
else
p_slot->state = POWERON_STATE;
- queue_work(pciehp_ordered_wq, &info->work);
+ queue_work(pciehp_wq, &info->work);
}
static void interrupt_event_handler(struct work_struct *work)
diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index 7b14148..bcdbb16 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -806,7 +806,6 @@ static void pcie_cleanup_slot(struct controller *ctrl)
struct slot *slot = ctrl->slot;
cancel_delayed_work(&slot->work);
flush_workqueue(pciehp_wq);
- flush_workqueue(pciehp_ordered_wq);
kfree(slot);
}
^ permalink raw reply related [flat|nested] 55+ messages in thread
* Re: 3.2.11: PCI Express card cannot be re-detected withing cca 60sec timeframe
2012-04-17 1:42 ` Yinghai Lu
@ 2012-04-17 2:48 ` Yinghai Lu
2012-04-17 7:27 ` Martin Mokrejs
0 siblings, 1 reply; 55+ messages in thread
From: Yinghai Lu @ 2012-04-17 2:48 UTC (permalink / raw)
To: Martin Mokrejs, Thomas Gleixner; +Cc: linux-pci, Linux Kernel Mailing List
On Mon, Apr 16, 2012 at 6:42 PM, Yinghai Lu <yinghai@kernel.org> wrote:
> On Mon, Apr 16, 2012 at 1:53 PM, Yinghai Lu <yinghai@kernel.org> wrote:
>> On Mon, Apr 16, 2012 at 12:09 PM, Martin Mokrejs
>> <mmokrejs@fold.natur.cuni.cz> wrote:
>>>>>> On Wed, Mar 21, 2012 at 3:46 PM, Martin Mokrejs
>>>>> I had some Ooopses with 3.4-rc2 but now I have tested 3.4-rc3. Still, linux
>>>>> does NOT realize that I have removed an ExpressCard from the slot. It realizes
>>>>> that only when I pluging the card back again. Actually, this is a case of a
>>>>> NEC chipset base USB3.0 card.
>>>>>
>>>>> In contrast, kernel DOES recognize that I unplugged a FireWire card from the
>>>>> same slot.
>>>>>
>>>>> This is a Dell Vostro 3550 laptop. Below is what syslog logged with my comment.
>>>>> Empty lines between the log entries are inserted whe I either inserted or removed
>>>>> a card. Probably a bit more will be in the attached dmesg file.
>>
>> so the interrupt for removal get generated, but pcie_isr() is delayed
>> when another surprise is generated...
>>
>
> please try to revert
> commit 486b10b9f43500741cd63a878d0ef23cd87fc66d
> Author: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
> Date: Mon Nov 7 20:56:50 2011 +0900
>
> PCI: pciehp: Handle push button event asynchronously
>
> Use non-ordered workqueue for attention button events.
>
> Attention button events on each slot can be handled asynchronously. So
> we should use non-ordered workqueue. This patch also removes ordered
> workqueue in pciehp as a result.
>
> to see if there is any difference.
can you send out lspci -vvxxxx -s 00:1c.7 after removing USB 3.0 express card?
Yinghai
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: 3.2.11: PCI Express card cannot be re-detected withing cca 60sec timeframe
2012-04-17 2:48 ` Yinghai Lu
@ 2012-04-17 7:27 ` Martin Mokrejs
2012-04-17 8:46 ` Yinghai Lu
0 siblings, 1 reply; 55+ messages in thread
From: Martin Mokrejs @ 2012-04-17 7:27 UTC (permalink / raw)
To: Yinghai Lu; +Cc: Thomas Gleixner, linux-pci, Linux Kernel Mailing List
[-- Attachment #1: Type: text/plain, Size: 2051 bytes --]
Yinghai Lu wrote:
> On Mon, Apr 16, 2012 at 6:42 PM, Yinghai Lu <yinghai@kernel.org> wrote:
>> On Mon, Apr 16, 2012 at 1:53 PM, Yinghai Lu <yinghai@kernel.org> wrote:
>>> On Mon, Apr 16, 2012 at 12:09 PM, Martin Mokrejs
>>> <mmokrejs@fold.natur.cuni.cz> wrote:
>>>>>>> On Wed, Mar 21, 2012 at 3:46 PM, Martin Mokrejs
>>>>>> I had some Ooopses with 3.4-rc2 but now I have tested 3.4-rc3. Still, linux
>>>>>> does NOT realize that I have removed an ExpressCard from the slot. It realizes
>>>>>> that only when I pluging the card back again. Actually, this is a case of a
>>>>>> NEC chipset base USB3.0 card.
>>>>>>
>>>>>> In contrast, kernel DOES recognize that I unplugged a FireWire card from the
>>>>>> same slot.
>>>>>>
>>>>>> This is a Dell Vostro 3550 laptop. Below is what syslog logged with my comment.
>>>>>> Empty lines between the log entries are inserted whe I either inserted or removed
>>>>>> a card. Probably a bit more will be in the attached dmesg file.
>>>
>>> so the interrupt for removal get generated, but pcie_isr() is delayed
>>> when another surprise is generated...
>>>
>>
>> please try to revert
>> commit 486b10b9f43500741cd63a878d0ef23cd87fc66d
>> Author: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
>> Date: Mon Nov 7 20:56:50 2011 +0900
>>
>> PCI: pciehp: Handle push button event asynchronously
>>
>> Use non-ordered workqueue for attention button events.
>>
>> Attention button events on each slot can be handled asynchronously. So
>> we should use non-ordered workqueue. This patch also removes ordered
>> workqueue in pciehp as a result.
>>
>> to see if there is any difference.
>
> can you send out lspci -vvxxxx -s 00:1c.7 after removing USB 3.0 express card?
No, that did not help (tried on 3.4-rc3). First I plugged in the NEC uPD720200 USB3.0 card
and unplugged it (card removal not reported :(), saved the lspci output.
Then I inserted the FireWire card, unplugged, again saved the lspci output.
Finally, saved the dmesg. All three files are attached.
Thank you for your time,
Martin
[-- Attachment #2: lspci_00.1c.7__after_USB3_card_removal.txt --]
[-- Type: text/plain, Size: 16465 bytes --]
00:1c.7 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=11, subordinate=16, sec-latency=0
I/O behind bridge: 0000c000-0000dfff
Memory behind bridge: f6c00000-f7cfffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f10fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #8, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #7, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq+ LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee00318 Data: 0000
Capabilities: [90] Subsystem: Dell Device 04b3
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport
Kernel modules: shpchp
00: 86 80 1e 1c 07 04 10 00 b5 00 04 06 10 00 81 00
10: 00 00 00 00 00 00 00 00 00 11 16 00 c0 d0 00 00
20: c0 f6 c0 f7 01 f0 01 f1 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 04 10 00
40: 10 80 42 01 00 80 00 00 00 00 10 00 12 3c 12 08
50: 43 00 11 70 60 b2 3c 00 28 00 40 01 00 00 00 00
60: 00 00 00 00 16 00 00 00 00 00 00 00 00 00 00 00
70: 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 05 90 01 00 18 03 e0 fe 00 00 00 00 00 00 00 00
90: 0d a0 00 00 28 10 b3 04 00 00 00 00 00 00 00 00
a0: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 01 02 0b 00 00 02 80 11 c1 00 00 00 00
e0: 00 03 00 00 00 00 00 00 03 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 87 0f 06 08 00 00 00 00
100: 00 00 00 00 00 00 00 00 00 40 00 00 11 00 06 00
110: 00 00 00 00 00 20 00 00 00 00 00 00 00 00 00 00
120: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
130: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
140: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
150: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
160: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
170: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
190: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
210: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
220: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
230: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
240: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
250: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
260: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
270: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
280: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
290: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
300: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
310: 00 00 00 00 1b 36 3a 74 00 00 14 14 31 17 42 00
320: 5b 60 09 00 20 20 00 0a 33 14 18 08 32 04 fa 03
330: 16 00 00 28 bc b5 bc 4a 00 00 00 00 74 4c 85 00
340: 3b 00 3b 00 5b 00 3f 00 32 00 0e 00 2f 00 f4 00
350: 33 00 f8 00 01 00 0c 00 04 00 04 00 00 00 00 00
360: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
370: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
380: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
390: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
3a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
3b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
3c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
3d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
3e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
3f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
410: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
420: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
430: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
440: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
450: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
460: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
470: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
480: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
490: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
4a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
4b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
4c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
4d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
4e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
4f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
510: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
520: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
530: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
540: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
550: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
560: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
570: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
580: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
590: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
5a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
5b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
5c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
5d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
5e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
5f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
600: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
610: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
620: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
630: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
640: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
650: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
660: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
670: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
680: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
690: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
6a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
6b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
6c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
6d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
6e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
6f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
700: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
710: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
720: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
730: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
740: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
750: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
760: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
770: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
780: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
790: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
7a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
7b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
7c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
7d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
7e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
7f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
810: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
820: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
830: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
840: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
850: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
860: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
870: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
880: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
890: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
8a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
8b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
8c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
8d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
8e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
8f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
900: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
910: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
920: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
930: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
940: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
950: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
960: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
970: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
980: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
990: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
9a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
9b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
9c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
9d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
9e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
9f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
aa0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ab0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ac0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ad0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ae0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
af0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ba0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
bb0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
bc0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
bd0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
be0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
bf0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ca0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
cb0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
cc0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
cd0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ce0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
cf0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
da0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
db0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
dc0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
dd0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
de0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
df0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ea0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
eb0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ec0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ed0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ee0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ef0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
fa0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
fb0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
fc0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
fd0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
fe0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ff0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[-- Attachment #3: lspci_00.1c.7__after_FireWire_card_removal.txt --]
[-- Type: text/plain, Size: 16457 bytes --]
00:1c.7 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=11, subordinate=16, sec-latency=0
I/O behind bridge: 0000c000-0000dfff
Memory behind bridge: f6c00000-f7cfffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f10fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #8, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #7, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq+ LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee00318 Data: 0000
Capabilities: [90] Subsystem: Dell Device 04b3
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport
Kernel modules: shpchp
00: 86 80 1e 1c 07 04 10 00 b5 00 04 06 10 00 81 00
10: 00 00 00 00 00 00 00 00 00 11 16 00 c0 d0 00 20
20: c0 f6 c0 f7 01 f0 01 f1 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 04 10 00
40: 10 80 42 01 00 80 00 00 00 00 11 00 12 4c 12 08
50: 00 00 11 50 60 b2 3c 00 28 00 00 01 00 00 00 00
60: 00 00 00 00 16 00 00 00 00 00 00 00 00 00 00 00
70: 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 05 90 01 00 18 03 e0 fe 00 00 00 00 00 00 00 00
90: 0d a0 00 00 28 10 b3 04 00 00 00 00 00 00 00 00
a0: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 01 02 0b 00 00 02 80 11 c1 00 00 00 00
e0: 00 03 00 00 00 00 00 00 03 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 87 0f 06 08 00 00 00 00
100: 00 00 00 00 00 00 00 00 00 40 00 00 11 00 06 00
110: 01 00 00 00 00 20 00 00 00 00 00 00 00 00 00 00
120: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
130: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
140: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
150: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
160: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
170: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
190: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
210: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
220: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
230: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
240: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
250: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
260: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
270: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
280: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
290: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
300: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
310: 00 00 00 00 1b 36 3a 74 00 00 14 14 31 17 42 00
320: 5b 60 09 00 20 20 00 0a 00 00 00 00 ff 0f 00 00
330: 16 00 00 28 bc b5 bc 4a 00 00 00 00 74 4c 85 00
340: 00 00 00 00 00 00 40 00 30 00 0c 00 00 00 00 00
350: 00 00 0a 00 01 00 08 00 00 00 00 00 00 00 00 00
360: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
370: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
380: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
390: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
3a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
3b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
3c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
3d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
3e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
3f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
410: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
420: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
430: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
440: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
450: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
460: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
470: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
480: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
490: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
4a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
4b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
4c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
4d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
4e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
4f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
510: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
520: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
530: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
540: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
550: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
560: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
570: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
580: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
590: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
5a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
5b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
5c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
5d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
5e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
5f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
600: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
610: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
620: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
630: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
640: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
650: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
660: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
670: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
680: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
690: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
6a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
6b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
6c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
6d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
6e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
6f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
700: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
710: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
720: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
730: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
740: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
750: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
760: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
770: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
780: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
790: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
7a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
7b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
7c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
7d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
7e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
7f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
810: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
820: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
830: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
840: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
850: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
860: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
870: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
880: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
890: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
8a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
8b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
8c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
8d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
8e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
8f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
900: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
910: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
920: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
930: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
940: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
950: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
960: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
970: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
980: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
990: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
9a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
9b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
9c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
9d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
9e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
9f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
aa0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ab0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ac0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ad0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ae0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
af0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ba0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
bb0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
bc0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
bd0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
be0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
bf0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ca0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
cb0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
cc0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
cd0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ce0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
cf0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
da0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
db0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
dc0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
dd0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
de0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
df0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ea0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
eb0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ec0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ed0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ee0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ef0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
fa0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
fb0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
fc0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
fd0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
fe0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ff0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[-- Attachment #4: dmesg__3.4-rc3-reverted-486b10b9f43500741cd63a878d0ef23cd87fc66d --]
[-- Type: text/plain, Size: 67260 bytes --]
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.4.0-rc3-default (root@vostro) (gcc version 4.5.3 (Gentoo 4.5.3-r2 p1.1, pie-0.4.7) ) #2 SMP Tue Apr 17 09:10:11 MEST 2012
[ 0.000000] Command line: root=/dev/sda5 pciehp.pciehp_debug=1
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d400 (usable)
[ 0.000000] BIOS-e820: 000000000009d400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
[ 0.000000] BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
[ 0.000000] BIOS-e820: 0000000020200000 - 0000000040000000 (usable)
[ 0.000000] BIOS-e820: 0000000040000000 - 0000000040200000 (reserved)
[ 0.000000] BIOS-e820: 0000000040200000 - 00000000da4e5000 (usable)
[ 0.000000] BIOS-e820: 00000000da4e5000 - 00000000da528000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000da528000 - 00000000da793000 (usable)
[ 0.000000] BIOS-e820: 00000000da793000 - 00000000da967000 (reserved)
[ 0.000000] BIOS-e820: 00000000da967000 - 00000000daa89000 (usable)
[ 0.000000] BIOS-e820: 00000000daa89000 - 00000000dad68000 (reserved)
[ 0.000000] BIOS-e820: 00000000dad68000 - 00000000dafe8000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000dafe8000 - 00000000db000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000db800000 - 00000000dfa00000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed04000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000041fe00000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.6 present.
[ 0.000000] DMI: Dell Inc. Vostro 3550/0JGC48, BIOS A09 09/30/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x41fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask C00000000 write-back
[ 0.000000] 1 base 400000000 mask FE0000000 write-back
[ 0.000000] 2 base 0DB800000 mask FFF800000 uncachable
[ 0.000000] 3 base 0DC000000 mask FFC000000 uncachable
[ 0.000000] 4 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 5 base 41FE00000 mask FFFE00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000db800000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xdaa89 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000daa89000
[ 0.000000] 0000000000 - 00daa00000 page 2M
[ 0.000000] 00daa00000 - 00daa89000 page 4k
[ 0.000000] kernel direct mapping tables up to daa89000 @ 1fffa000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-000000041fe00000
[ 0.000000] 0100000000 - 041fe00000 page 2M
[ 0.000000] kernel direct mapping tables up to 41fe00000 @ daa77000-daa89000
[ 0.000000] ACPI: RSDP 00000000000f0410 00024 (v02 DELL)
[ 0.000000] ACPI: XSDT 00000000dafe8078 00074 (v01 DELL WN09 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 00000000daff1d08 000F4 (v04 DELL WN09 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 00000000dafe8180 09B85 (v02 DELL WN09 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000dafe3f80 00040
[ 0.000000] ACPI: APIC 00000000daff1e00 00072 (v03 DELL WN09 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 00000000daff1e78 0003C (v01 DELL WN09 01072009 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000daff1eb8 004B0 (v01 TrmRef PtidDevc 00001000 INTL 20091112)
[ 0.000000] ACPI: SLIC 00000000daff2368 00176 (v01 DELL WN09 01072009 AMI 00010013)
[ 0.000000] ACPI: HPET 00000000daff24e0 00038 (v01 DELL WN09 01072009 AMI. 00000004)
[ 0.000000] ACPI: SSDT 00000000daff2518 00846 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 00000000daff2d60 00996 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: DMAR 00000000daff36f8 000E8 (v01 INTEL SNB 00000001 INTL 00000001)
[ 0.000000] ACPI: OSFR 00000000daff37e0 00086 (v01 DELL M08 07DB091E ASL 00000061)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000041fe00000
[ 0.000000] Initmem setup node 0 0000000000000000-000000041fe00000
[ 0.000000] NODE_DATA [000000041fdfc000 - 000000041fdfffff]
[ 0.000000] [ffffea0000000000-ffffea000e7fffff] PMD -> [ffff88040f400000-ffff88041d5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0041fe00
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x00020000
[ 0.000000] 0: 0x00020200 -> 0x00040000
[ 0.000000] 0: 0x00040200 -> 0x000da4e5
[ 0.000000] 0: 0x000da528 -> 0x000da793
[ 0.000000] 0: 0x000da967 -> 0x000daa89
[ 0.000000] 0: 0x00100000 -> 0x0041fe00
[ 0.000000] On node 0 totalpages: 4170239
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3920 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 875690 pages, LIFO batch:31
[ 0.000000] Normal zone: 44793 pages used for memmap
[ 0.000000] Normal zone: 3231495 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[ 0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000
[ 0.000000] PM: Registered nosave memory: 00000000da4e5000 - 00000000da528000
[ 0.000000] PM: Registered nosave memory: 00000000da793000 - 00000000da967000
[ 0.000000] PM: Registered nosave memory: 00000000daa89000 - 00000000dad68000
[ 0.000000] PM: Registered nosave memory: 00000000dad68000 - 00000000dafe8000
[ 0.000000] PM: Registered nosave memory: 00000000dafe8000 - 00000000db000000
[ 0.000000] PM: Registered nosave memory: 00000000db000000 - 00000000db800000
[ 0.000000] PM: Registered nosave memory: 00000000db800000 - 00000000dfa00000
[ 0.000000] PM: Registered nosave memory: 00000000dfa00000 - 00000000f8000000
[ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000
[ 0.000000] PM: Registered nosave memory: 00000000fed04000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at dfa00000 (gap: dfa00000:18600000)
[ 0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 25 pages/cpu @ffff88041fa00000 s72448 r8192 d21760 u524288
[ 0.000000] pcpu-alloc: s72448 r8192 d21760 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4111105
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/sda5 pciehp.pciehp_debug=1
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 16372136k/17299456k available (5714k kernel code, 618500k absent, 308820k reserved, 3604k data, 544k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:4352 nr_irqs:712 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.010000] Detected 2793.606 MHz processor.
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5587.21 BogoMIPS (lpj=27936060)
[ 0.000192] pid_max: default: 32768 minimum: 301
[ 0.001158] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.004161] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.005537] Mount-cache hash table entries: 256
[ 0.005798] CPU: Physical Processor ID: 0
[ 0.005891] CPU: Processor Core ID: 0
[ 0.005985] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.005986] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.006176] mce: CPU supports 7 MCE banks
[ 0.006276] CPU0: Thermal monitoring enabled (TM1)
[ 0.006374] using mwait in idle threads.
[ 0.006523] ACPI: Core revision 20120320
[ 0.023056] DMAR: Host address width 36
[ 0.023150] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.023251] IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ 0.023397] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.023495] IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.023640] DMAR: RMRR base: 0x000000dad53000 end: 0x000000dad61fff
[ 0.023736] DMAR: RMRR base: 0x000000db800000 end: 0x000000df9fffff
[ 0.023900] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.023995] HPET id 0 under DRHD base 0xfed91000
[ 0.024088] HPET id 0 under DRHD base 0xfed91000
[ 0.024180] HPET id 0 under DRHD base 0xfed91000
[ 0.024273] HPET id 0 under DRHD base 0xfed91000
[ 0.024366] HPET id 0 under DRHD base 0xfed91000
[ 0.024459] HPET id 0 under DRHD base 0xfed91000
[ 0.024551] HPET id 0 under DRHD base 0xfed91000
[ 0.024644] HPET id 0 under DRHD base 0xfed91000
[ 0.024896] Enabled IRQ remapping in x2apic mode
[ 0.024990] Enabling x2apic
[ 0.025080] Enabled x2apic
[ 0.025173] Switched APIC routing to cluster x2apic.
[ 0.025699] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.125648] CPU0: Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz stepping 07
[ 0.236480] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
[ 0.236785] PEBS disabled due to CPU errata.
[ 0.236878] ... version: 3
[ 0.236971] ... bit width: 48
[ 0.237062] ... generic registers: 4
[ 0.237155] ... value mask: 0000ffffffffffff
[ 0.237250] ... max period: 000000007fffffff
[ 0.237344] ... fixed-purpose events: 3
[ 0.237436] ... event mask: 000000070000000f
[ 0.237619] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.239111] Booting Node 0, Processors #1
[ 0.252311] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.252571] #2
[ 0.265725] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.265988] #3 Ok.
[ 0.279188] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.279307] Brought up 4 CPUs
[ 0.279398] Total of 4 processors activated (22348.84 BogoMIPS).
[ 0.282430] devtmpfs: initialized
[ 0.282685] PM: Registering ACPI NVS region [mem 0xda4e5000-0xda527fff] (274432 bytes)
[ 0.282840] PM: Registering ACPI NVS region [mem 0xdad68000-0xdafe7fff] (2621440 bytes)
[ 0.283108] xor: automatically using best checksumming function: generic_sse
[ 0.326346] generic_sse: 12454.800 MB/sec
[ 0.326439] xor: using function: generic_sse (12454.800 MB/sec)
[ 0.326666] dummy:
[ 0.326825] NET: Registered protocol family 16
[ 0.327216] ACPI: bus type pci registered
[ 0.327400] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.327549] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.334856] PCI: Using configuration type 1 for base access
[ 0.340928] bio: create slab <bio-0> at 0
[ 0.506083] raid6: int64x1 2922 MB/s
[ 0.675837] raid6: int64x2 3002 MB/s
[ 0.845591] raid6: int64x4 2722 MB/s
[ 1.015318] raid6: int64x8 1729 MB/s
[ 1.185065] raid6: sse2x1 7521 MB/s
[ 1.354814] raid6: sse2x2 9273 MB/s
[ 1.524558] raid6: sse2x4 10551 MB/s
[ 1.524650] raid6: using algorithm sse2x4 (10551 MB/s)
[ 1.524786] ACPI: Added _OSI(Module Device)
[ 1.524881] ACPI: Added _OSI(Processor Device)
[ 1.524977] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 1.525074] ACPI: Added _OSI(Processor Aggregator Device)
[ 1.526380] ACPI: EC: Look up EC in DSDT
[ 1.527698] ACPI: Executed 1 blocks of module-level executable AML code
[ 1.532728] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 1.537136] ACPI: SSDT 00000000dad51698 0064F (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 1.537676] ACPI: Dynamic OEM Table Load:
[ 1.537847] ACPI: SSDT (null) 0064F (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 1.538429] ACPI: SSDT 00000000dad52a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 1.539008] ACPI: Dynamic OEM Table Load:
[ 1.539179] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 1.539526] ACPI: SSDT 00000000dad50d98 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 1.540057] ACPI: Dynamic OEM Table Load:
[ 1.540227] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 1.541012] ACPI: Interpreter enabled
[ 1.541106] ACPI: (supports S0 S1 S3 S4 S5)
[ 1.541415] ACPI: Using IOAPIC for interrupt routing
[ 1.566765] ACPI: No dock devices found.
[ 1.566861] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 1.567338] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 1.567873] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 1.567970] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 1.568066] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 1.568212] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[ 1.568358] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 1.568503] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 1.568648] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
[ 1.568794] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
[ 1.568939] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
[ 1.569085] pci_root PNP0A08:00: host bridge window [mem 0xdfa00000-0xfeafffff]
[ 1.569231] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
[ 1.569420] PCI host bridge to bus 0000:00
[ 1.569515] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 1.569611] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 1.569707] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 1.569804] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 1.569901] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 1.569998] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 1.570095] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 1.570190] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 1.570288] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 1.570388] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff]
[ 1.570484] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[ 1.570588] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[ 1.570622] pci 0000:00:02.0: [8086:0126] type 00 class 0x030000
[ 1.570631] pci 0000:00:02.0: reg 10: [mem 0xf6800000-0xf6bfffff 64bit]
[ 1.570637] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 1.570641] pci 0000:00:02.0: reg 20: [io 0xf000-0xf03f]
[ 1.570690] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 1.570712] pci 0000:00:16.0: reg 10: [mem 0xf7f0a000-0xf7f0a00f 64bit]
[ 1.570785] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 1.570818] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 1.570839] pci 0000:00:1a.0: reg 10: [mem 0xf7f08000-0xf7f083ff]
[ 1.570926] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 1.570953] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 1.570967] pci 0000:00:1b.0: reg 10: [mem 0xf7f00000-0xf7f03fff 64bit]
[ 1.571034] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.571059] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 1.571136] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.571162] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[ 1.571238] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 1.571265] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[ 1.571342] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 1.571372] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[ 1.571500] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 1.571542] pci 0000:00:1c.7: [8086:1c1e] type 01 class 0x060400
[ 1.571673] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[ 1.571713] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 1.571733] pci 0000:00:1d.0: reg 10: [mem 0xf7f07000-0xf7f073ff]
[ 1.571821] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 1.571847] pci 0000:00:1f.0: [8086:1c4b] type 00 class 0x060100
[ 1.571971] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[ 1.571988] pci 0000:00:1f.2: reg 10: [io 0xf0b0-0xf0b7]
[ 1.571996] pci 0000:00:1f.2: reg 14: [io 0xf0a0-0xf0a3]
[ 1.572004] pci 0000:00:1f.2: reg 18: [io 0xf090-0xf097]
[ 1.572012] pci 0000:00:1f.2: reg 1c: [io 0xf080-0xf083]
[ 1.572020] pci 0000:00:1f.2: reg 20: [io 0xf060-0xf07f]
[ 1.572028] pci 0000:00:1f.2: reg 24: [mem 0xf7f06000-0xf7f067ff]
[ 1.572071] pci 0000:00:1f.2: PME# supported from D3hot
[ 1.572090] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 1.572105] pci 0000:00:1f.3: reg 10: [mem 0xf7f05000-0xf7f050ff 64bit]
[ 1.572124] pci 0000:00:1f.3: reg 20: [io 0xf040-0xf05f]
[ 1.572193] pci 0000:00:1c.0: PCI bridge to [bus 03-04]
[ 1.572360] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
[ 1.572379] pci 0000:05:00.0: reg 10: [io 0xe000-0xe0ff]
[ 1.572413] pci 0000:05:00.0: reg 18: [mem 0xf1104000-0xf1104fff 64bit pref]
[ 1.572435] pci 0000:05:00.0: reg 20: [mem 0xf1100000-0xf1103fff 64bit pref]
[ 1.572526] pci 0000:05:00.0: supports D1 D2
[ 1.572527] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.590332] pci 0000:00:1c.1: PCI bridge to [bus 05-06]
[ 1.590472] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
[ 1.590480] pci 0000:00:1c.1: bridge window [mem 0xf1100000-0xf11fffff 64bit pref]
[ 1.590684] pci 0000:09:00.0: [8086:008a] type 00 class 0x028000
[ 1.590832] pci 0000:09:00.0: reg 10: [mem 0xf7e00000-0xf7e01fff 64bit]
[ 1.591522] pci 0000:09:00.0: PME# supported from D0 D3hot D3cold
[ 1.610417] pci 0000:00:1c.3: PCI bridge to [bus 09-0a]
[ 1.610515] pci 0000:00:1c.3: bridge window [mem 0xf7e00000-0xf7efffff]
[ 1.610614] pci 0000:0b:00.0: [104c:8241] type 00 class 0x0c0330
[ 1.610639] pci 0000:0b:00.0: reg 10: [mem 0xf7d00000-0xf7d0ffff 64bit]
[ 1.610659] pci 0000:0b:00.0: reg 18: [mem 0xf7d10000-0xf7d11fff 64bit]
[ 1.610763] pci 0000:0b:00.0: supports D1 D2
[ 1.610765] pci 0000:0b:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.630269] pci 0000:00:1c.4: PCI bridge to [bus 0b-0c]
[ 1.630413] pci 0000:00:1c.4: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 1.630491] pci 0000:00:1c.7: PCI bridge to [bus 11-16]
[ 1.630588] pci 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
[ 1.630594] pci 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff]
[ 1.630602] pci 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
[ 1.630634] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.630806] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 1.630843] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 1.630881] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 1.630918] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[ 1.630970] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP08._PRT]
[ 1.631099] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 1.631402] pci0000:00: ACPI _OSC control (0x19) granted
[ 1.636046] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 1.636610] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 1.637177] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
[ 1.637739] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 1.638302] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.638992] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.639679] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 1.640243] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 1.640878] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.641029] vgaarb: loaded
[ 1.641120] vgaarb: bridge control possible 0000:00:02.0
[ 1.641348] SCSI subsystem initialized
[ 1.641509] libata version 3.00 loaded.
[ 1.641612] usbcore: registered new interface driver usbfs
[ 1.641728] usbcore: registered new interface driver hub
[ 1.641849] usbcore: registered new device driver usb
[ 1.642001] Linux media interface: v0.10
[ 1.642115] Linux video capture interface: v2.00
[ 1.642568] wmi: Mapper loaded
[ 1.642703] Advanced Linux Sound Architecture Driver Version 1.0.25.
[ 1.642800] PCI: Using ACPI for IRQ routing
[ 1.644825] PCI: pci_cache_line_size set to 64 bytes
[ 1.644958] reserve RAM buffer: 000000000009d400 - 000000000009ffff
[ 1.644960] reserve RAM buffer: 00000000da4e5000 - 00000000dbffffff
[ 1.644963] reserve RAM buffer: 00000000da793000 - 00000000dbffffff
[ 1.644966] reserve RAM buffer: 00000000daa89000 - 00000000dbffffff
[ 1.644969] reserve RAM buffer: 000000041fe00000 - 000000041fffffff
[ 1.645107] Bluetooth: Core ver 2.16
[ 1.645219] NET: Registered protocol family 31
[ 1.645312] Bluetooth: HCI device and connection manager initialized
[ 1.645410] Bluetooth: HCI socket layer initialized
[ 1.645502] Bluetooth: L2CAP socket layer initialized
[ 1.645598] Bluetooth: SCO socket layer initialized
[ 1.645758] cfg80211: Calling CRDA to update world regulatory domain
[ 1.645962] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 1.646410] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 1.648511] Switching to clocksource hpet
[ 1.648681] pnp: PnP ACPI init
[ 1.648780] ACPI: bus type pnp registered
[ 1.649112] pnp 00:00: [bus 00-3e]
[ 1.649115] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 1.649116] pnp 00:00: [io 0x0cf8-0x0cff]
[ 1.649118] pnp 00:00: [io 0x0d00-0xffff window]
[ 1.649120] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 1.649121] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 1.649123] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 1.649124] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 1.649126] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 1.649127] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 1.649129] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 1.649130] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 1.649132] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 1.649134] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 1.649135] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 1.649137] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 1.649138] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 1.649140] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 1.649141] pnp 00:00: [mem 0xdfa00000-0xfeafffff window]
[ 1.649143] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 1.649213] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 1.649224] pnp 00:01: [io 0x0000-0x001f]
[ 1.649226] pnp 00:01: [io 0x0081-0x0091]
[ 1.649227] pnp 00:01: [io 0x0093-0x009f]
[ 1.649228] pnp 00:01: [io 0x00c0-0x00df]
[ 1.649230] pnp 00:01: [dma 4]
[ 1.649271] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 1.649279] pnp 00:02: [mem 0xff000000-0xffffffff]
[ 1.649319] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 1.649391] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 1.649433] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 1.649445] pnp 00:04: [io 0x002e-0x002f]
[ 1.649447] pnp 00:04: [io 0x004e-0x004f]
[ 1.649448] pnp 00:04: [io 0x0061]
[ 1.649449] pnp 00:04: [io 0x0063]
[ 1.649450] pnp 00:04: [io 0x0065]
[ 1.649452] pnp 00:04: [io 0x0067]
[ 1.649453] pnp 00:04: [io 0x0070]
[ 1.649454] pnp 00:04: [io 0x0080]
[ 1.649455] pnp 00:04: [io 0x0092]
[ 1.649456] pnp 00:04: [io 0x00b2-0x00b3]
[ 1.649458] pnp 00:04: [io 0x0680-0x069f]
[ 1.649459] pnp 00:04: [io 0x1000-0x100f]
[ 1.649461] pnp 00:04: [io 0xffff]
[ 1.649462] pnp 00:04: [io 0xffff]
[ 1.649463] pnp 00:04: [io 0x0400-0x0453]
[ 1.649464] pnp 00:04: [io 0x0458-0x047f]
[ 1.649466] pnp 00:04: [io 0x0500-0x057f]
[ 1.649467] pnp 00:04: [io 0x164e-0x164f]
[ 1.649525] system 00:04: [io 0x0680-0x069f] has been reserved
[ 1.649621] system 00:04: [io 0x1000-0x100f] has been reserved
[ 1.649717] system 00:04: [io 0xffff] has been reserved
[ 1.649812] system 00:04: [io 0xffff] has been reserved
[ 1.649906] system 00:04: [io 0x0400-0x0453] has been reserved
[ 1.650002] system 00:04: [io 0x0458-0x047f] has been reserved
[ 1.650098] system 00:04: [io 0x0500-0x057f] has been reserved
[ 1.650193] system 00:04: [io 0x164e-0x164f] has been reserved
[ 1.650292] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.650300] pnp 00:05: [io 0x0070-0x0077]
[ 1.650310] pnp 00:05: [irq 8]
[ 1.650353] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.650379] pnp 00:06: [io 0x0454-0x0457]
[ 1.650430] system 00:06: [io 0x0454-0x0457] has been reserved
[ 1.650526] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 1.650534] pnp 00:07: [io 0x00f0-0x00ff]
[ 1.650541] pnp 00:07: [irq 13]
[ 1.650583] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 1.650599] pnp 00:08: [io 0x0010-0x001f]
[ 1.650600] pnp 00:08: [io 0x0022-0x003f]
[ 1.650602] pnp 00:08: [io 0x0044-0x005f]
[ 1.650603] pnp 00:08: [io 0x0068-0x006f]
[ 1.650604] pnp 00:08: [io 0x0072-0x007f]
[ 1.650605] pnp 00:08: [io 0x0080]
[ 1.650607] pnp 00:08: [io 0x0084-0x0086]
[ 1.650609] pnp 00:08: [io 0x0088]
[ 1.650610] pnp 00:08: [io 0x008c-0x008e]
[ 1.650612] pnp 00:08: [io 0x0090-0x009f]
[ 1.650613] pnp 00:08: [io 0x00a2-0x00bf]
[ 1.650614] pnp 00:08: [io 0x00e0-0x00ef]
[ 1.650615] pnp 00:08: [io 0x04d0-0x04d1]
[ 1.650617] pnp 00:08: [mem 0xfe800000-0xfe802fff]
[ 1.650675] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 1.650772] system 00:08: [mem 0xfe800000-0xfe802fff] has been reserved
[ 1.650870] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.650887] pnp 00:09: [irq 12]
[ 1.650931] pnp 00:09: Plug and Play ACPI device, IDs DLL04b3 SYN0600 SYN0002 PNP0f13 (active)
[ 1.650945] pnp 00:0a: [io 0x0060]
[ 1.650946] pnp 00:0a: [io 0x0064]
[ 1.650947] pnp 00:0a: [io 0x0062]
[ 1.650949] pnp 00:0a: [io 0x0066]
[ 1.650954] pnp 00:0a: [irq 1]
[ 1.650997] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active)
[ 1.651189] pnp 00:0b: [mem 0xfed1c000-0xfed1ffff]
[ 1.651191] pnp 00:0b: [mem 0xfed10000-0xfed17fff]
[ 1.651193] pnp 00:0b: [mem 0xfed18000-0xfed18fff]
[ 1.651194] pnp 00:0b: [mem 0xfed19000-0xfed19fff]
[ 1.651196] pnp 00:0b: [mem 0xf8000000-0xfbffffff]
[ 1.651197] pnp 00:0b: [mem 0xfed20000-0xfed3ffff]
[ 1.651198] pnp 00:0b: [mem 0xfed90000-0xfed93fff]
[ 1.651200] pnp 00:0b: [mem 0xfed45000-0xfed8ffff]
[ 1.651201] pnp 00:0b: [mem 0xff000000-0xffffffff]
[ 1.651203] pnp 00:0b: [mem 0xfee00000-0xfeefffff]
[ 1.651204] pnp 00:0b: [mem 0xdfa00000-0xdfa00fff]
[ 1.651271] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.651368] system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved
[ 1.651465] system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved
[ 1.651561] system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved
[ 1.651659] system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved
[ 1.651756] system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.651852] system 00:0b: [mem 0xfed90000-0xfed93fff] has been reserved
[ 1.651948] system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 1.652044] system 00:0b: [mem 0xff000000-0xffffffff] has been reserved
[ 1.652142] system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 1.652239] system 00:0b: [mem 0xdfa00000-0xdfa00fff] has been reserved
[ 1.652337] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.652395] pnp 00:0c: [irq 20]
[ 1.652452] pnp 00:0c: Plug and Play ACPI device, IDs SMO8800 (active)
[ 1.652562] pnp 00:0d: [mem 0x20000000-0x201fffff]
[ 1.652564] pnp 00:0d: [mem 0x40000000-0x401fffff]
[ 1.652632] system 00:0d: [mem 0x20000000-0x201fffff] has been reserved
[ 1.652730] system 00:0d: [mem 0x40000000-0x401fffff] has been reserved
[ 1.652828] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 1.652870] pnp: PnP ACPI: found 14 devices
[ 1.652964] ACPI: ACPI bus type pnp unregistered
[ 1.661027] pci 0000:00:1c.0: PCI bridge to [bus 03-04]
[ 1.661133] pci 0000:00:1c.1: PCI bridge to [bus 05-06]
[ 1.661227] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
[ 1.661329] pci 0000:00:1c.1: bridge window [mem 0xf1100000-0xf11fffff 64bit pref]
[ 1.661477] pci 0000:00:1c.3: PCI bridge to [bus 09-0a]
[ 1.661575] pci 0000:00:1c.3: bridge window [mem 0xf7e00000-0xf7efffff]
[ 1.661678] pci 0000:00:1c.4: PCI bridge to [bus 0b-0c]
[ 1.661777] pci 0000:00:1c.4: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 1.661885] pci 0000:00:1c.7: PCI bridge to [bus 11-16]
[ 1.661978] pci 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
[ 1.662080] pci 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff]
[ 1.662179] pci 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
[ 1.662370] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.662372] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.662373] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.662375] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 1.662377] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 1.662378] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 1.662380] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[ 1.662381] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
[ 1.662383] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
[ 1.662385] pci_bus 0000:00: resource 13 [mem 0xdfa00000-0xfeafffff]
[ 1.662386] pci_bus 0000:00: resource 14 [mem 0xfed40000-0xfed44fff]
[ 1.662388] pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
[ 1.662390] pci_bus 0000:05: resource 2 [mem 0xf1100000-0xf11fffff 64bit pref]
[ 1.662391] pci_bus 0000:09: resource 1 [mem 0xf7e00000-0xf7efffff]
[ 1.662393] pci_bus 0000:0b: resource 1 [mem 0xf7d00000-0xf7dfffff]
[ 1.662395] pci_bus 0000:11: resource 0 [io 0xc000-0xdfff]
[ 1.662396] pci_bus 0000:11: resource 1 [mem 0xf6c00000-0xf7cfffff]
[ 1.662398] pci_bus 0000:11: resource 2 [mem 0xf0000000-0xf10fffff 64bit pref]
[ 1.662469] NET: Registered protocol family 2
[ 1.662826] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 1.663806] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.665021] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.666564] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.666661] TCP: reno registered
[ 1.666769] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 1.666918] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 1.667120] NET: Registered protocol family 1
[ 1.667223] pci 0000:00:02.0: Boot video device
[ 1.908408] PCI: CLS 64 bytes, default 64
[ 1.908468] DMAR: No ATSR found
[ 1.908583] IOMMU 0 0xfed90000: using Queued invalidation
[ 1.908679] IOMMU 1 0xfed91000: using Queued invalidation
[ 1.908775] IOMMU: Setting RMRR:
[ 1.908875] IOMMU: Setting identity map for device 0000:00:02.0 [0xdb800000 - 0xdf9fffff]
[ 1.909370] IOMMU: Setting identity map for device 0000:00:1d.0 [0xdad53000 - 0xdad61fff]
[ 1.909534] IOMMU: Setting identity map for device 0000:00:1a.0 [0xdad53000 - 0xdad61fff]
[ 1.909688] IOMMU: Prepare 0-16MiB unity mapping for LPC
[ 1.909789] IOMMU: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff]
[ 1.910222] PCI-DMA: Intel(R) Virtualization Technology for Directed I/O
[ 1.912994] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x1b
[ 1.913098] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x1b
[ 1.913200] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x1b
[ 1.913304] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x1b
[ 1.913445] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.914552] sha1_ssse3: Using AVX optimized SHA-1 implementation
[ 1.915780] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.917659] DLM installed
[ 1.917886] msgmni has been set to 32105
[ 1.919252] NET: Registered protocol family 38
[ 1.919346] async_tx: api initialized (async)
[ 1.919478] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.919624] io scheduler noop registered
[ 1.919717] io scheduler deadline registered
[ 1.919826] io scheduler cfq registered (default)
[ 1.920261] pcieport 0000:00:1c.7: irq 42 for MSI/MSI-X
[ 1.920478] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.920659] pciehp 0000:00:1c.7:pcie04: Hotplug Controller:
[ 1.920754] pciehp 0000:00:1c.7:pcie04: Seg/Bus/Dev/Func/IRQ : 0000:00:1c.7 IRQ 42
[ 1.920900] pciehp 0000:00:1c.7:pcie04: Vendor ID : 0x8086
[ 1.920997] pciehp 0000:00:1c.7:pcie04: Device ID : 0x1c1e
[ 1.921093] pciehp 0000:00:1c.7:pcie04: Subsystem ID : 0x04b3
[ 1.921190] pciehp 0000:00:1c.7:pcie04: Subsystem Vendor ID : 0x1028
[ 1.921287] pciehp 0000:00:1c.7:pcie04: PCIe Cap offset : 0x40
[ 1.921385] pciehp 0000:00:1c.7:pcie04: PCI resource [13] : [io 0xc000-0xdfff]
[ 1.921530] pciehp 0000:00:1c.7:pcie04: PCI resource [14] : [mem 0xf6c00000-0xf7cfffff]
[ 1.921677] pciehp 0000:00:1c.7:pcie04: PCI resource [15] : [mem 0xf0000000-0xf10fffff 64bit pref]
[ 1.921826] pciehp 0000:00:1c.7:pcie04: Slot Capabilities : 0x003cb260
[ 1.921924] pciehp 0000:00:1c.7:pcie04: Physical Slot Number : 7
[ 1.922020] pciehp 0000:00:1c.7:pcie04: Attention Button : no
[ 1.922116] pciehp 0000:00:1c.7:pcie04: Power Controller : no
[ 1.922213] pciehp 0000:00:1c.7:pcie04: MRL Sensor : no
[ 1.922309] pciehp 0000:00:1c.7:pcie04: Attention Indicator : no
[ 1.922405] pciehp 0000:00:1c.7:pcie04: Power Indicator : no
[ 1.922502] pciehp 0000:00:1c.7:pcie04: Hot-Plug Surprise : yes
[ 1.922597] pciehp 0000:00:1c.7:pcie04: EMI Present : no
[ 1.922694] pciehp 0000:00:1c.7:pcie04: Command Completed : no
[ 1.922792] pciehp 0000:00:1c.7:pcie04: Slot Status : 0x0000
[ 1.922891] pciehp 0000:00:1c.7:pcie04: Slot Control : 0x0000
[ 1.922989] pciehp 0000:00:1c.7:pcie04: Link Active Reporting supported
[ 1.922998] pciehp 0000:00:1c.7:pcie04: HPC vendor_id 8086 device_id 1c1e ss_vid 1028 ss_did 4b3
[ 1.923147] pciehp 0000:00:1c.7:pcie04: Registering domain:bus:dev=0000:11:00 sun=7
[ 1.923197] pciehp 0000:00:1c.7:pcie04: pciehp_get_power_status: SLOTCTRL 58 value read 28
[ 1.923199] pciehp 0000:00:1c.7:pcie04: service driver pciehp loaded
[ 1.923226] pciehp: pcie_port_service_register = 0
[ 1.923227] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.923323] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 1.923914] intel_idle: MWAIT substates: 0x21120
[ 1.923915] intel_idle: v0.4 model 0x2A
[ 1.923916] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.924013] ACPI: AC Adapter [AC] (on-line)
[ 1.924220] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 1.925738] ACPI: Lid Switch [LID0]
[ 1.925888] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 1.926037] ACPI: Power Button [PWRB]
[ 1.926186] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 1.926334] ACPI: Sleep Button [SBTN]
[ 1.926481] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.926626] ACPI: Power Button [PWRF]
[ 1.926981] ACPI: Requesting acpi_cpufreq
[ 1.937289] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.937386] ACPI: Thermal Zone [THM] (66 C)
[ 1.937592] GHES: HEST is not enabled!
[ 1.959455] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.960203] Non-volatile memory driver v1.3
[ 1.960622] i8k: unable to get SMM BIOS version
[ 1.963919] Dell laptop SMM driver v1.14 21/02/2005 Massimo Dal Zotto (dz@debian.org)
[ 1.964122] Linux agpgart interface v0.103
[ 1.964261] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
[ 1.964441] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 1.965649] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[ 1.965883] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 1.966047] ipmi message handler version 39.2
[ 1.966147] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
[ 1.966294] Hangcheck: Using getrawmonotonic().
[ 1.966425] [drm] Initialized drm 1.1.0 20060810
[ 1.966750] i915 0000:00:02.0: setting latency timer to 64
[ 1.978528] ACPI: Battery Slot [BAT0] (battery present)
[ 2.004555] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
[ 2.004702] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 2.005127] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[ 2.005136] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 2.005233] [drm] Driver supports precise vblank timestamp query.
[ 2.005357] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.429476] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 2.906752] Refined TSC clocksource calibration: 2793.653 MHz.
[ 2.906877] Switching to clocksource tsc
[ 2.983676] fbcon: inteldrmfb (fb0) is primary device
[ 3.484400] Console: switching to colour frame buffer device 170x48
[ 3.486800] fb0: inteldrmfb frame buffer device
[ 3.486801] drm: registered panic notifier
[ 3.488033] acpi device:34: registered as cooling_device4
[ 3.488271] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4
[ 3.488309] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 3.488369] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 3.489200] loop: module loaded
[ 3.489332] ahci 0000:00:1f.2: version 3.0
[ 3.489378] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
[ 3.489403] ahci: SSS flag set, parallel bus scan disabled
[ 3.505897] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x31 impl SATA mode
[ 3.505999] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
[ 3.506036] ahci 0000:00:1f.2: setting latency timer to 64
[ 3.546573] scsi0 : ahci
[ 3.546685] scsi1 : ahci
[ 3.546778] scsi2 : ahci
[ 3.546870] scsi3 : ahci
[ 3.546961] scsi4 : ahci
[ 3.547055] scsi5 : ahci
[ 3.547384] ata1: SATA max UDMA/133 abar m2048@0xf7f06000 port 0xf7f06100 irq 44
[ 3.547414] ata2: DUMMY
[ 3.548303] ata3: DUMMY
[ 3.549180] ata4: DUMMY
[ 3.550042] ata5: SATA max UDMA/133 abar m2048@0xf7f06000 port 0xf7f06300 irq 44
[ 3.550921] ata6: SATA max UDMA/133 abar m2048@0xf7f06000 port 0xf7f06380 irq 44
[ 3.551919] tun: Universal TUN/TAP device driver, 1.6
[ 3.552790] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 3.553713] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 3.554694] r8169 0000:05:00.0: irq 45 for MSI/MSI-X
[ 3.554849] r8169 0000:05:00.0: eth0: RTL8168e/8111e at 0xffffc900065d2000, 18:03:73:a0:6f:6a, XID 0c200000 IRQ 45
[ 3.555746] r8169 0000:05:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 3.556695] VMware vmxnet3 virtual NIC driver - version 1.1.29.0-k-NAPI
[ 3.557633] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.558535] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 3.558538] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 3.559412] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 3.560312] ehci_hcd 0000:00:1a.0: debug port 2
[ 3.565040] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 3.565053] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7f08000
[ 3.585743] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 3.586696] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.587548] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.588399] usb usb1: Product: EHCI Host Controller
[ 3.589245] usb usb1: Manufacturer: Linux 3.4.0-rc3-default ehci_hcd
[ 3.590104] usb usb1: SerialNumber: 0000:00:1a.0
[ 3.591068] hub 1-0:1.0: USB hub found
[ 3.591923] hub 1-0:1.0: 2 ports detected
[ 3.592843] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3.592846] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 3.593708] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 3.594587] ehci_hcd 0000:00:1d.0: debug port 2
[ 3.599324] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 3.599335] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7f07000
[ 3.615702] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 3.616645] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.617483] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.618320] usb usb2: Product: EHCI Host Controller
[ 3.619144] usb usb2: Manufacturer: Linux 3.4.0-rc3-default ehci_hcd
[ 3.619972] usb usb2: SerialNumber: 0000:00:1d.0
[ 3.620891] hub 2-0:1.0: USB hub found
[ 3.621699] hub 2-0:1.0: 2 ports detected
[ 3.622552] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.623425] xhci_hcd 0000:0b:00.0: xHCI Host Controller
[ 3.624246] xhci_hcd 0000:0b:00.0: new USB bus registered, assigned bus number 3
[ 3.625264] xhci_hcd 0000:0b:00.0: irq 16, io mem 0xf7d00000
[ 3.626198] xhci_hcd 0000:0b:00.0: irq 46 for MSI/MSI-X
[ 3.626203] xhci_hcd 0000:0b:00.0: irq 47 for MSI/MSI-X
[ 3.626207] xhci_hcd 0000:0b:00.0: irq 48 for MSI/MSI-X
[ 3.626212] xhci_hcd 0000:0b:00.0: irq 49 for MSI/MSI-X
[ 3.626216] xhci_hcd 0000:0b:00.0: irq 50 for MSI/MSI-X
[ 3.626312] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.627181] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.628036] usb usb3: Product: xHCI Host Controller
[ 3.628876] usb usb3: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
[ 3.629740] usb usb3: SerialNumber: 0000:0b:00.0
[ 3.630673] xHCI xhci_add_endpoint called for root hub
[ 3.630675] xHCI xhci_check_bandwidth called for root hub
[ 3.630711] hub 3-0:1.0: USB hub found
[ 3.631569] hub 3-0:1.0: 2 ports detected
[ 3.632475] xhci_hcd 0000:0b:00.0: xHCI Host Controller
[ 3.633326] xhci_hcd 0000:0b:00.0: new USB bus registered, assigned bus number 4
[ 3.634197] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 3.635052] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.635903] usb usb4: Product: xHCI Host Controller
[ 3.636727] usb usb4: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
[ 3.637547] usb usb4: SerialNumber: 0000:0b:00.0
[ 3.638412] xHCI xhci_add_endpoint called for root hub
[ 3.638414] xHCI xhci_check_bandwidth called for root hub
[ 3.638448] hub 4-0:1.0: USB hub found
[ 3.639265] hub 4-0:1.0: 2 ports detected
[ 3.640172] usbcore: registered new interface driver uas
[ 3.641046] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2] at 0x60,0x64 irq 1,12
[ 3.643994] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.644816] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.645762] mousedev: PS/2 mouse device common for all mice
[ 3.646831] rtc_cmos 00:05: RTC can wake from S4
[ 3.647767] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 3.648604] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 3.649445] i2c /dev entries driver
[ 3.650616] gspca_main: v2.14.0 registered
[ 3.651473] usbcore: registered new interface driver uvcvideo
[ 3.652307] USB Video Class driver (1.1.1)
[ 3.653214] coretemp coretemp.0: TjMax is 100 degrees C
[ 3.653225] coretemp coretemp.0: TjMax is 100 degrees C
[ 3.653234] coretemp coretemp.0: TjMax is 100 degrees C
[ 3.653263] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 3.654173] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 3.655066] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 3.655931] iTCO_vendor_support: vendor-support=0
[ 3.656792] md: linear personality registered for level -1
[ 3.657631] md: raid0 personality registered for level 0
[ 3.658463] md: raid1 personality registered for level 1
[ 3.659292] md: raid10 personality registered for level 10
[ 3.660115] md: raid6 personality registered for level 6
[ 3.660943] md: raid5 personality registered for level 5
[ 3.660989] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 3.662649] md: raid4 personality registered for level 4
[ 3.663515] device-mapper: uevent: version 1.0.3
[ 3.664403] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 3.665442] device-mapper: dm-log-userspace: version 1.1.0 loaded
[ 3.666332] usbcore: registered new interface driver btusb
[ 3.667252] cpuidle: using governor ladder
[ 3.668180] cpuidle: using governor menu
[ 3.669080] sdhci: Secure Digital Host Controller Interface driver
[ 3.669915] sdhci: Copyright(c) Pierre Ossman
[ 3.671061] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 3.672280] usbcore: registered new interface driver usbhid
[ 3.673131] usbhid: USB HID core driver
[ 3.674042] mei 0000:00:16.0: setting latency timer to 64
[ 3.674087] mei 0000:00:16.0: irq 51 for MSI/MSI-X
[ 3.702337] input: Dell WMI hotkeys as /devices/virtual/input/input6
[ 3.714360] intel_oaktrail: Platform not recognized (You could try the module's force-parameter)
[ 3.714534] snd_hda_intel 0000:00:1b.0: irq 52 for MSI/MSI-X
[ 3.895361] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.902374] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 3.903679] ata1.00: ATA-8: WDC WD7500BPKT-75PK4T0, 01.01A01, max UDMA/133
[ 3.904651] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 3.905577] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 3.911581] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 3.912834] ata1.00: configured for UDMA/133
[ 3.925541] scsi 0:0:0:0: Direct-Access ATA WDC WD7500BPKT-7 01.0 PQ: 0 ANSI: 5
[ 3.927008] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[ 3.927195] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.928912] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 3.929993] sd 0:0:0:0: [sda] Write Protect is off
[ 3.930927] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.930995] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.028253] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 4.030031] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.055644] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 4.056640] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.058106] hub 1-1:1.0: USB hub found
[ 4.059164] hub 1-1:1.0: 6 ports detected
[ 4.174975] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 4.274874] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.279222] ata5.00: ATAPI: PLDS DVD+/-RW DS-8A8SH, KD11, max UDMA/100
[ 4.285872] ata5.00: configured for UDMA/100
[ 4.299121] scsi 4:0:0:0: CD-ROM PLDS DVD+-RW DS-8A8SH KD11 PQ: 0 ANSI: 5
[ 4.308816] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.309836] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.311099] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 4.311293] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 4.325083] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 4.326445] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.328039] hub 2-1:1.0: USB hub found
[ 4.328622] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
[ 4.330073] hub 2-1:1.0: 8 ports detected
[ 4.353722] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 4.355330] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 4.356919] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 4.358763] ALSA device list:
[ 4.359772] #0: HDA Intel PCH at 0xf7f00000 irq 52
[ 4.360879] TCP: cubic registered
[ 4.361883] NET: Registered protocol family 17
[ 4.362911] Bluetooth: RFCOMM TTY layer initialized
[ 4.363932] Bluetooth: RFCOMM socket layer initialized
[ 4.364946] Bluetooth: RFCOMM ver 1.11
[ 4.365946] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 4.366912] Bluetooth: BNEP filters: protocol multicast
[ 4.367872] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 4.369203] sctp: Hash tables configured (established 65536 bind 65536)
[ 4.370298] Registering the dns_resolver key type
[ 4.371546] PM: Checking hibernation image partition /dev/sda6
[ 4.371552] PM: Hibernation image partition 8:6 present
[ 4.371553] PM: Looking for hibernation image.
[ 4.409604] PM: Image not found (code -22)
[ 4.409606] PM: Hibernation image not present or could not be loaded.
[ 4.409619] registered taskstats version 1
[ 4.411775] rtc_cmos 00:05: setting system clock to 2012-04-17 07:14:56 UTC (1334646896)
[ 4.413478] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
[ 4.444519] usb 3-1: new low-speed USB device number 2 using xhci_hcd
[ 4.498100] usb 3-1: New USB device found, idVendor=046d, idProduct=c050
[ 4.499025] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.499854] usb 3-1: Product: USB-PS/2 Optical Mouse
[ 4.500690] usb 3-1: Manufacturer: Logitech
[ 4.501582] usb 3-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 4.518276] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1c.4/0000:0b:00.0/usb3/3-1/3-1:1.0/input/input11
[ 4.519326] generic-usb 0003:046D:C050.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:0b:00.0-1/input0
[ 4.594507] usb 1-1.5: new high-speed USB device number 3 using ehci_hcd
[ 4.644628] input: DualPoint Stick as /devices/platform/i8042/serio1/input/input12
[ 4.654158] ata6: SATA link down (SStatus 0 SControl 300)
[ 4.659663] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input13
[ 4.663872] md: Waiting for all devices to be available before autodetect
[ 4.664771] md: If you don't use raid, use raid=noautodetect
[ 4.666121] md: Autodetecting RAID arrays.
[ 4.667008] md: Scanned 0 and added 0 devices.
[ 4.667886] md: autorun ...
[ 4.668752] md: ... autorun DONE.
[ 4.711643] usb 1-1.5: New USB device found, idVendor=05ca, idProduct=1820
[ 4.712598] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.713448] usb 1-1.5: Product: Laptop_Integrated_Webcam_FHD
[ 4.714305] usb 1-1.5: Manufacturer: CN01MWM9724871A4KB28A00
[ 4.716165] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_FHD (05ca:1820)
[ 4.718760] input: Laptop_Integrated_Webcam_FHD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input14
[ 4.735641] kjournald starting. Commit interval 5 seconds
[ 4.735885] EXT3-fs (sda5): mounted filesystem with writeback data mode
[ 4.735902] VFS: Mounted root (ext3 filesystem) readonly on device 8:5.
[ 4.776799] devtmpfs: mounted
[ 4.777731] Freeing unused kernel memory: 544k freed
[ 4.794213] usb 2-1.3: new full-speed USB device number 3 using ehci_hcd
[ 4.905421] usb 2-1.3: New USB device found, idVendor=138a, idProduct=0011
[ 4.906378] usb 2-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[ 4.907225] usb 2-1.3: SerialNumber: 56ed5821afe2
[ 4.983924] usb 2-1.6: new high-speed USB device number 4 using ehci_hcd
[ 5.349939] usb 2-1.6: New USB device found, idVendor=0bda, idProduct=0138
[ 5.350902] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5.351762] usb 2-1.6: Product: USB2.0-CRW
[ 5.352607] usb 2-1.6: Manufacturer: Generic
[ 5.353464] usb 2-1.6: SerialNumber: 20090516388200000
[ 8.145228] udevd[1750]: starting version 171
[ 10.346593] ACPI Warning: 0x000000000000f040-0x000000000000f05f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120320/utaddress-251)
[ 10.346599] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.534852] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d
[ 10.534854] Copyright(c) 2003-2012 Intel Corporation
[ 10.535033] iwlwifi 0000:09:00.0: pci_resource_len = 0x00002000
[ 10.535034] iwlwifi 0000:09:00.0: pci_resource_base = ffffc90006684000
[ 10.535036] iwlwifi 0000:09:00.0: HW Revision ID = 0x34
[ 10.535129] iwlwifi 0000:09:00.0: irq 53 for MSI/MSI-X
[ 10.681768] iwlwifi 0000:09:00.0: loaded firmware version 17.168.5.2 build 35905
[ 10.681894] iwlwifi 0000:09:00.0: CONFIG_IWLWIFI_DEBUG enabled
[ 10.681895] iwlwifi 0000:09:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[ 10.681897] iwlwifi 0000:09:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[ 10.681898] iwlwifi 0000:09:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled
[ 10.681899] iwlwifi 0000:09:00.0: CONFIG_IWLWIFI_P2P disabled
[ 10.681901] iwlwifi 0000:09:00.0: Detected Intel(R) Centrino(R) Wireless-N 1030 BGN, REV=0xB0
[ 10.681946] iwlwifi 0000:09:00.0: L1 Disabled; Enabling L0S
[ 10.699086] iwlwifi 0000:09:00.0: device EEPROM VER=0x71a, CALIB=0x6
[ 10.699088] iwlwifi 0000:09:00.0: Device SKU: 0x150
[ 10.699089] iwlwifi 0000:09:00.0: Valid Tx ant: 0x1, Valid Rx ant: 0x3
[ 10.699101] iwlwifi 0000:09:00.0: Tunable channels: 13 802.11bg, 0 802.11a channels
[ 10.699205] Registered led device: phy0-led
[ 10.699286] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 10.862737] Initializing USB Mass Storage driver...
[ 10.862829] scsi6 : usb-storage 2-1.6:1.0
[ 10.862897] usbcore: registered new interface driver usb-storage
[ 10.862899] USB Mass Storage support registered.
[ 11.856854] scsi 6:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 11.857050] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 13.167289] EXT3-fs (sda5): using internal journal
[ 13.389661] Adding 4998972k swap on /dev/sda6. Priority:-1 extents:1 across:4998972k
[ 17.737694] r8169 0000:05:00.0: eth0: unable to load firmware patch rtl_nic/rtl8168e-2.fw (-2)
[ 17.768453] r8169 0000:05:00.0: eth0: link down
[ 17.768484] r8169 0000:05:00.0: eth0: link down
[ 19.027945] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 19.517836] r8169 0000:05:00.0: eth0: link up
[ 24.365655] [drm] Changing LVDS panel from (+hsync, -vsync) to (-hsync, -vsync)
[ 24.393015] microcode: CPU0 updated to revision 0x25, date = 2011-10-11
[ 24.393360] microcode: CPU1 updated to revision 0x25, date = 2011-10-11
[ 24.393691] microcode: CPU2 updated to revision 0x25, date = 2011-10-11
[ 24.394035] microcode: CPU3 updated to revision 0x25, date = 2011-10-11
[ 27.023488] r8169 0000:05:00.0: eth0: link down
[ 29.372746] r8169 0000:05:00.0: eth0: link up
[ 33.491534] usb 2-1.2: new low-speed USB device number 5 using ehci_hcd
[ 33.609524] usb 2-1.2: New USB device found, idVendor=04f2, idProduct=0116
[ 33.609534] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 33.609541] usb 2-1.2: Product: USB Keyboard
[ 33.609546] usb 2-1.2: Manufacturer: CHICONY
[ 33.614724] input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input15
[ 33.614812] generic-usb 0003:04F2:0116.0002: input,hidraw1: USB HID v1.10 Keyboard [CHICONY USB Keyboard] on usb-0000:00:1d.0-1.2/input0
[ 48.809204] [drm] Changing LVDS panel from (-hsync, -vsync) to (+hsync, -vsync)
[ 54.555188] ata1.00: configured for UDMA/133
[ 54.555190] ata1: EH complete
[ 100.475709] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 8
[ 100.475719] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
[ 100.475723] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
[ 100.475761] pciehp 0000:00:1c.7:pcie04: Surprise Removal
[ 100.475794] pciehp 0000:00:1c.7:pcie04: check_link_active: lnk_status = 7011
[ 100.581369] pciehp 0000:00:1c.7:pcie04: pciehp_check_link_status: lnk_status = 7011
[ 100.581476] pci 0000:11:00.0: [1033:0194] type 00 class 0x0c0330
[ 100.581526] pci 0000:11:00.0: reg 10: [mem 0x00000000-0x00001fff 64bit]
[ 100.581771] pci 0000:11:00.0: PME# supported from D0 D3hot
[ 100.601373] pci 0000:11:00.0: BAR 0: assigned [mem 0xf6c00000-0xf6c01fff 64bit]
[ 100.601418] pcieport 0000:00:1c.7: PCI bridge to [bus 11-16]
[ 100.601422] pcieport 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
[ 100.601426] pcieport 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff]
[ 100.601430] pcieport 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
[ 100.601561] xhci_hcd 0000:11:00.0: enabling device (0100 -> 0102)
[ 100.601645] xhci_hcd 0000:11:00.0: xHCI Host Controller
[ 100.601651] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 5
[ 100.601952] xhci_hcd 0000:11:00.0: irq 19, io mem 0xf6c00000
[ 100.602068] xhci_hcd 0000:11:00.0: irq 54 for MSI/MSI-X
[ 100.602072] xhci_hcd 0000:11:00.0: irq 55 for MSI/MSI-X
[ 100.602076] xhci_hcd 0000:11:00.0: irq 56 for MSI/MSI-X
[ 100.602080] xhci_hcd 0000:11:00.0: irq 57 for MSI/MSI-X
[ 100.602084] xhci_hcd 0000:11:00.0: irq 58 for MSI/MSI-X
[ 100.602237] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 100.602238] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 100.602240] usb usb5: Product: xHCI Host Controller
[ 100.602241] usb usb5: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
[ 100.602242] usb usb5: SerialNumber: 0000:11:00.0
[ 100.602359] xHCI xhci_add_endpoint called for root hub
[ 100.602361] xHCI xhci_check_bandwidth called for root hub
[ 100.602402] hub 5-0:1.0: USB hub found
[ 100.602415] hub 5-0:1.0: 2 ports detected
[ 100.602477] xhci_hcd 0000:11:00.0: xHCI Host Controller
[ 100.602480] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 6
[ 100.605187] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[ 100.605190] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 100.605192] usb usb6: Product: xHCI Host Controller
[ 100.605194] usb usb6: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
[ 100.605195] usb usb6: SerialNumber: 0000:11:00.0
[ 100.605303] xHCI xhci_add_endpoint called for root hub
[ 100.605304] xHCI xhci_check_bandwidth called for root hub
[ 100.605333] hub 6-0:1.0: USB hub found
[ 100.605352] hub 6-0:1.0: 2 ports detected
[ 239.312560] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 8
[ 239.312570] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
[ 239.312585] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
[ 239.312626] pciehp 0000:00:1c.7:pcie04: Surprise Removal
[ 239.312655] pciehp 0000:00:1c.7:pcie04: Disabling domain:bus:device=0000:11:00
[ 239.312658] pciehp 0000:00:1c.7:pcie04: pciehp_unconfigure_device: domain:bus:dev = 0000:11:00
[ 239.314783] xhci_hcd 0000:11:00.0: remove, state 4
[ 239.314799] usb usb6: USB disconnect, device number 1
[ 239.314864] xHCI xhci_drop_endpoint called for root hub
[ 239.314866] xHCI xhci_check_bandwidth called for root hub
[ 239.315044] xhci_hcd 0000:11:00.0: Host not halted after 16000 microseconds.
[ 239.315049] xhci_hcd 0000:11:00.0: USB bus 6 deregistered
[ 239.315055] xhci_hcd 0000:11:00.0: remove, state 4
[ 239.315059] usb usb5: USB disconnect, device number 1
[ 239.315094] xHCI xhci_drop_endpoint called for root hub
[ 239.315096] xHCI xhci_check_bandwidth called for root hub
[ 239.315160] xhci_hcd 0000:11:00.0: Host not halted after 16000 microseconds.
[ 239.315258] xhci_hcd 0000:11:00.0: USB bus 5 deregistered
[ 239.321445] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 8
[ 239.321448] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
[ 239.321459] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
[ 239.321465] pciehp 0000:00:1c.7:pcie04: Surprise Removal
[ 239.321495] pciehp 0000:00:1c.7:pcie04: check_link_active: lnk_status = 7011
[ 239.424526] pciehp 0000:00:1c.7:pcie04: pciehp_check_link_status: lnk_status = 7011
[ 239.424590] pci 0000:11:00.0: [1106:3403] type 00 class 0x0c0010
[ 239.424637] pci 0000:11:00.0: reg 10: [mem 0x00000000-0x000007ff 64bit]
[ 239.424651] pci 0000:11:00.0: reg 18: [io 0x0000-0x00ff]
[ 239.424768] pci 0000:11:00.0: supports D2
[ 239.424769] pci 0000:11:00.0: PME# supported from D2 D3hot D3cold
[ 239.444546] pci 0000:11:00.0: BAR 0: assigned [mem 0xf6c00000-0xf6c007ff 64bit]
[ 239.444571] pci 0000:11:00.0: BAR 2: assigned [io 0xc000-0xc0ff]
[ 239.444587] pcieport 0000:00:1c.7: PCI bridge to [bus 11-16]
[ 239.444600] pcieport 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
[ 239.444605] pcieport 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff]
[ 239.444609] pcieport 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
[ 239.532471] firewire_ohci 0000:11:00.0: enabling device (0100 -> 0103)
[ 239.604371] firewire_ohci 0000:11:00.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[ 240.103732] firewire_core 0000:11:00.0: created device fw0: GUID 0011066600000003, S400
[ 247.205718] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 8
[ 247.205727] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
[ 247.205743] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
[ 247.205783] pciehp 0000:00:1c.7:pcie04: Surprise Removal
[ 247.205814] pciehp 0000:00:1c.7:pcie04: Disabling domain:bus:device=0000:11:00
[ 247.205816] pciehp 0000:00:1c.7:pcie04: pciehp_unconfigure_device: domain:bus:dev = 0000:11:00
[ 247.205995] firewire_ohci 0000:11:00.0: removed fw-ohci device
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: 3.2.11: PCI Express card cannot be re-detected withing cca 60sec timeframe
2012-04-17 7:27 ` Martin Mokrejs
@ 2012-04-17 8:46 ` Yinghai Lu
2012-04-17 8:58 ` Yinghai Lu
0 siblings, 1 reply; 55+ messages in thread
From: Yinghai Lu @ 2012-04-17 8:46 UTC (permalink / raw)
To: Martin Mokrejs; +Cc: Thomas Gleixner, linux-pci, Linux Kernel Mailing List
On Tue, Apr 17, 2012 at 12:27 AM, Martin Mokrejs
<mmokrejs@fold.natur.cuni.cz> wrote:
>>
>> can you send out lspci -vvxxxx -s 00:1c.7 after removing USB 3.0 express card?
>
> No, that did not help (tried on 3.4-rc3). First I plugged in the NEC uPD720200 USB3.0 card
> and unplugged it (card removal not reported :(), saved the lspci output.
> Then I inserted the FireWire card, unplugged, again saved the lspci output.
> Finally, saved the dmesg. All three files are attached.
for USB 3.0:
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState+
PresDet+: mean that card is still there. so no interrupt is generated
by chipset.
that present bit is decide by by inband link or out of band.
sometimes when out of band pres is no, present bit could be keep flip
around because in root port try to retrain to detect ...
but it is not the case.
the pin "CPPE# PCI Express interface presence detect" should get into
hotplug FPGA in motherboard.
You may need to check with vendor about if there is any problem with
that hotplug FPGA.
Yinghai
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: 3.2.11: PCI Express card cannot be re-detected withing cca 60sec timeframe
2012-04-16 21:04 ` Yinghai Lu
@ 2012-04-17 8:56 ` Martin Mokrejs
0 siblings, 0 replies; 55+ messages in thread
From: Martin Mokrejs @ 2012-04-17 8:56 UTC (permalink / raw)
To: Yinghai Lu; +Cc: linux-pci
Hi Yinghai,
I forgot to answer one of you questions ... below.
Yinghai Lu wrote:
> On Mon, Apr 16, 2012 at 12:39 PM, Martin Mokrejs
> <mmokrejs@fold.natur.cuni.cz> wrote:
>> Yinghai Lu wrote:
>>> On Mon, Apr 16, 2012 at 2:49 AM, Martin Mokrejs
>>> <mmokrejs@fold.natur.cuni.cz> wrote:
>>>> Hi Yinghai,
>>>>
>>>> Yinghai Lu wrote:
>>>>> On Wed, Mar 21, 2012 at 3:46 PM, Martin Mokrejs
>>>> I had some Ooopses with 3.4-rc2 but now I have tested 3.4-rc3. Still, linux
>>>> does NOT realize that I have removed an ExpressCard from the slot. It realizes
>>>> that only when I pluging the card back again. Actually, this is a case of a
>>>> NEC chipset base USB3.0 card.
>>>>
>>>> In contrast, kernel DOES recognize that I unplugged a FireWire card from the
>>>> same slot.
>>>>
>>>> This is a Dell Vostro 3550 laptop. Below is what syslog logged with my comment.
>>>> Empty lines between the log entries are inserted whe I either inserted or removed
>>>> a card. Probably a bit more will be in the attached dmesg file.
>>
>> [cut]
>>
>>> please check boot with pciehp.pciehp_debug=1
>>>
>>> also you could use tail -f /var/log/messages to get more timely outputs.
>>
>> I tried the third Express Card I do have here. It is probably the most interesting
>> to play with. ;) It plugs somehow weirdly into the slot. I somehow have to push it in
>> and a little bit pull out so that some mechanical lock catches the card. But, it allocated
>> resources only once, and in other cases the driver is somehow locked up. It could be
>> a driver issue but I think it is interesting information in this moment. Below I leave
>> always 3 empty lines to emphasize I was pulling out the card and after a while back in
>> (like in previous attempts). The output is just the one from dmesg, it is more detailed
>> then what is logged through syslogd.
>>
>>
>>
>>
>> [ 2784.573629] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 8
>> [ 2784.573631] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
>> [ 2784.573644] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
>> [ 2784.573669] pciehp 0000:00:1c.7:pcie04: Surprise Removal
>> [ 2785.580455] pciehp 0000:00:1c.7:pcie04: pciehp_check_link_status: lnk_status = 7811
>> [ 2785.580464] pciehp 0000:00:1c.7:pcie04: Link Training Error occurs
>> [ 2785.580470] pciehp 0000:00:1c.7:pcie04: Failed to check link status
>
> good, link can not be trained in 1s.
>
>> [ 2788.317351] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 8
>> [ 2788.317360] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
>> [ 2788.317369] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
>> [ 2788.317412] pciehp 0000:00:1c.7:pcie04: Surprise Removal
>> [ 2788.317570] pciehp 0000:00:1c.7:pcie04: Disabling domain:bus:device=0000:11:00
>> [ 2788.317572] pciehp 0000:00:1c.7:pcie04: pciehp_unconfigure_device: domain:bus:dev = 0000:11:00
>
> looks removal isr get delay too.
>
>> [ 2788.799777] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 8
>> [ 2788.799779] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
>> [ 2788.799782] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
>> [ 2788.799802] pciehp 0000:00:1c.7:pcie04: Surprise Removal
>> [ 2789.804129] pciehp 0000:00:1c.7:pcie04: pciehp_check_link_status: lnk_status = 7011
>> [ 2789.804399] pci 0000:11:00.0: [9710:9912] type 0 class 0x000700
>> [ 2789.804610] pci 0000:11:00.0: reg 10: [io 0x0000-0x0007]
>> [ 2789.804743] pci 0000:11:00.0: reg 14: [mem 0x00000000-0x00000fff]
>> [ 2789.805193] pci 0000:11:00.0: reg 24: [mem 0x00000000-0x00000fff]
>> [ 2789.805976] pci 0000:11:00.0: PME# supported from D3hot D3cold
>> [ 2789.806397] pci 0000:11:00.1: [9710:9912] type 0 class 0x000700
>> [ 2789.806618] pci 0000:11:00.1: reg 10: [io 0x0000-0x0007]
>> [ 2789.806802] pci 0000:11:00.1: reg 14: [mem 0x00000000-0x00000fff]
>> [ 2789.808796] pci 0000:11:00.1: reg 24: [mem 0x00000000-0x00000fff]
>> [ 2789.809452] pci 0000:11:00.1: PME# supported from D3hot D3cold
>> [ 2789.809800] pci 0000:11:00.2: [9710:9912] type 0 class 0x000701
>> [ 2789.809955] pci 0000:11:00.2: reg 10: [io 0x0000-0x0007]
>> [ 2789.810086] pci 0000:11:00.2: reg 14: [io 0x0000-0x0007]
>> [ 2789.810165] pci 0000:11:00.2: reg 18: [mem 0x00000000-0x00000fff]
>> [ 2789.810523] pci 0000:11:00.2: reg 24: [mem 0x00000000-0x00000fff]
>> [ 2789.811273] pci 0000:11:00.2: PME# supported from D3hot D3cold
>> [ 2789.864174] pci 0000:11:00.0: BAR 1: assigned [mem 0xf6c00000-0xf6c00fff]
>> [ 2789.864199] pci 0000:11:00.0: BAR 5: assigned [mem 0xf6c01000-0xf6c01fff]
>> [ 2789.864224] pci 0000:11:00.1: BAR 1: assigned [mem 0xf6c02000-0xf6c02fff]
>> [ 2789.864250] pci 0000:11:00.1: BAR 5: assigned [mem 0xf6c03000-0xf6c03fff]
>> [ 2789.864294] pci 0000:11:00.2: BAR 2: assigned [mem 0xf6c04000-0xf6c04fff]
>> [ 2789.864339] pci 0000:11:00.2: BAR 5: assigned [mem 0xf6c05000-0xf6c05fff]
>> [ 2789.864396] pci 0000:11:00.0: BAR 0: assigned [io 0xc000-0xc007]
>> [ 2789.864461] pci 0000:11:00.1: BAR 0: assigned [io 0xc008-0xc00f]
>> [ 2789.864535] pci 0000:11:00.2: BAR 0: assigned [io 0xc010-0xc017]
>> [ 2789.864614] pci 0000:11:00.2: BAR 1: assigned [io 0xc018-0xc01f]
>> [ 2789.864640] pcieport 0000:00:1c.7: PCI bridge to [bus 11-16]
>> [ 2789.864643] pcieport 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
>> [ 2789.864648] pcieport 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff]
>> [ 2789.864652] pcieport 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
>> [ 2789.864953] serial 0000:11:00.0: enabling device (0100 -> 0103)
>> [ 2789.910711] 0000:11:00.0: ttyS0 at I/O 0xc000 (irq = 19) is a ST16650V2
>> [ 2789.911900] serial 0000:11:00.1: enabling device (0100 -> 0103)
>> [ 2789.953869] 0000:11:00.1: ttyS1 at I/O 0xc008 (irq = 16) is a ST16650V2
>> [ 2790.018840] ppdev: user-space parallel port driver
>> [ 2790.020038] parport_serial 0000:11:00.2: enabling device (0100 -> 0103)
>> [ 2790.020647] parport0: PC-style at 0xc010 (0xc018), irq 17, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
>>
>>
>> [ 2839.728485] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 8
>> [ 2839.728494] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
>> [ 2839.728503] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
>> [ 2839.728546] pciehp 0000:00:1c.7:pcie04: Surprise Removal
>> [ 2839.728710] pciehp 0000:00:1c.7:pcie04: Disabling domain:bus:device=0000:11:00
>> [ 2839.728712] pciehp 0000:00:1c.7:pcie04: pciehp_unconfigure_device: domain:bus:dev = 0000:11:00
>
> not delayed.
>
>>
>>
>> [ 2859.890589] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 8
>> [ 2859.890602] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
>> [ 2859.890605] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
>> [ 2859.890631] pciehp 0000:00:1c.7:pcie04: Surprise Removal
>> [ 2860.897910] pciehp 0000:00:1c.7:pcie04: pciehp_check_link_status: lnk_status = 7811
>> [ 2860.897919] pciehp 0000:00:1c.7:pcie04: Link Training Error occurs
>> [ 2860.897925] pciehp 0000:00:1c.7:pcie04: Failed to check link status
>
> link training failed again.
>
>> [ 2860.907011] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 8
>> [ 2860.907019] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
>> [ 2860.907028] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
>> [ 2860.907073] pciehp 0000:00:1c.7:pcie04: Surprise Removal
>> [ 2860.907209] pciehp 0000:00:1c.7:pcie04: Disabling domain:bus:device=0000:11:00
>> [ 2860.907211] pciehp 0000:00:1c.7:pcie04: pciehp_unconfigure_device: domain:bus:dev = 0000:11:00
>
> removal isr get delayed.
>
>> [ 2861.242654] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 8
>> [ 2861.242656] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
>> [ 2861.242669] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
>> [ 2861.242684] pciehp 0000:00:1c.7:pcie04: Surprise Removal
>> [ 2862.245893] pciehp 0000:00:1c.7:pcie04: pciehp_check_link_status: lnk_status = 7811
>> [ 2862.245902] pciehp 0000:00:1c.7:pcie04: Link Training Error occurs
>> [ 2862.245908] pciehp 0000:00:1c.7:pcie04: Failed to check link status
>>
>>
>> [ 2900.516939] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 8
>> [ 2900.516948] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
>> [ 2900.516957] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
>> [ 2900.516999] pciehp 0000:00:1c.7:pcie04: Surprise Removal
>> [ 2900.517170] pciehp 0000:00:1c.7:pcie04: Disabling domain:bus:device=0000:11:00
>> [ 2900.517172] pciehp 0000:00:1c.7:pcie04: pciehp_unconfigure_device: domain:bus:dev = 0000:11:00
>>
>>
>> [ 2917.473608] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 8
>> [ 2917.473610] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
>> [ 2917.473624] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
>> [ 2917.473649] pciehp 0000:00:1c.7:pcie04: Surprise Removal
>> [ 2918.481860] pciehp 0000:00:1c.7:pcie04: pciehp_check_link_status: lnk_status = 7811
>> [ 2918.481869] pciehp 0000:00:1c.7:pcie04: Link Training Error occurs
>> [ 2918.481875] pciehp 0000:00:1c.7:pcie04: Failed to check link status
>>
>>
>> [ 2962.382234] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 8
>> [ 2962.382244] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
>> [ 2962.382253] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
>> [ 2962.382283] pciehp 0000:00:1c.7:pcie04: Surprise Removal
>> [ 2962.382446] pciehp 0000:00:1c.7:pcie04: Disabling domain:bus:device=0000:11:00
>> [ 2962.382448] pciehp 0000:00:1c.7:pcie04: pciehp_unconfigure_device: domain:bus:dev = 0000:11:00
>> [ 2991.261907] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 8
>> [ 2991.261920] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
>> [ 2991.261923] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
>> [ 2991.261943] pciehp 0000:00:1c.7:pcie04: Surprise Removal
>> [ 2992.261621] pciehp 0000:00:1c.7:pcie04: pciehp_check_link_status: lnk_status = 7811
>> [ 2992.261630] pciehp 0000:00:1c.7:pcie04: Link Training Error occurs
>> [ 2992.261636] pciehp 0000:00:1c.7:pcie04: Failed to check link status
>>
>>
>> [ 3010.910120] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 8
>> [ 3010.910129] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
>> [ 3010.910138] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
>> [ 3010.910180] pciehp 0000:00:1c.7:pcie04: Surprise Removal
>> [ 3010.910346] pciehp 0000:00:1c.7:pcie04: Disabling domain:bus:device=0000:11:00
>> [ 3010.910348] pciehp 0000:00:1c.7:pcie04: pciehp_unconfigure_device: domain:bus:dev = 0000:11:00
>>
>
> You can try to set express card speed from Auto to Gen1 in your BIOS setup.
I can only Enable/Disable express card slot in BIOS. :(
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: 3.2.11: PCI Express card cannot be re-detected withing cca 60sec timeframe
2012-04-17 8:46 ` Yinghai Lu
@ 2012-04-17 8:58 ` Yinghai Lu
2012-04-17 9:34 ` Martin Mokrejs
0 siblings, 1 reply; 55+ messages in thread
From: Yinghai Lu @ 2012-04-17 8:58 UTC (permalink / raw)
To: Martin Mokrejs; +Cc: Thomas Gleixner, linux-pci, Linux Kernel Mailing List
On Tue, Apr 17, 2012 at 1:46 AM, Yinghai Lu <yinghai@kernel.org> wrote:
> On Tue, Apr 17, 2012 at 12:27 AM, Martin Mokrejs
> <mmokrejs@fold.natur.cuni.cz> wrote:
>>>
>>> can you send out lspci -vvxxxx -s 00:1c.7 after removing USB 3.0 express card?
>>
>> No, that did not help (tried on 3.4-rc3). First I plugged in the NEC uPD720200 USB3.0 card
>> and unplugged it (card removal not reported :(), saved the lspci output.
>> Then I inserted the FireWire card, unplugged, again saved the lspci output.
>> Finally, saved the dmesg. All three files are attached.
>
> for USB 3.0:
> SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
> Changed: MRL- PresDet- LinkState+
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+
BWMgmt+ ABWMgmt-
link still active even that card get removed, that looks like chipset
have problem.
Yinghai
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: 3.2.11: PCI Express card cannot be re-detected withing cca 60sec timeframe
2012-04-17 8:58 ` Yinghai Lu
@ 2012-04-17 9:34 ` Martin Mokrejs
2012-04-17 17:07 ` Yinghai Lu
0 siblings, 1 reply; 55+ messages in thread
From: Martin Mokrejs @ 2012-04-17 9:34 UTC (permalink / raw)
To: Yinghai Lu; +Cc: Thomas Gleixner, linux-pci, Linux Kernel Mailing List
Yinghai Lu wrote:
> On Tue, Apr 17, 2012 at 1:46 AM, Yinghai Lu <yinghai@kernel.org> wrote:
>> On Tue, Apr 17, 2012 at 12:27 AM, Martin Mokrejs
>> <mmokrejs@fold.natur.cuni.cz> wrote:
>>>>
>>>> can you send out lspci -vvxxxx -s 00:1c.7 after removing USB 3.0 express card?
>>>
>>> No, that did not help (tried on 3.4-rc3). First I plugged in the NEC uPD720200 USB3.0 card
>>> and unplugged it (card removal not reported :(), saved the lspci output.
>>> Then I inserted the FireWire card, unplugged, again saved the lspci output.
>>> Finally, saved the dmesg. All three files are attached.
>>
>> for USB 3.0:
>> SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
>> Changed: MRL- PresDet- LinkState+
>
> LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+
> BWMgmt+ ABWMgmt-
>
> link still active even that card get removed, that looks like chipset
> have problem.
Yinghai,
so what should I ask Dell for? To fix BIOS of the laptop? What exactly? Or do you think
this is a hardware issue with the chipset?
# lspci
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05)
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5)
00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5)
00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5)
00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b5)
00:1c.7 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 (rev b5)
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05)
00:1f.0 ISA bridge: Intel Corporation HM67 Express Chipset Family LPC Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05)
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
09:00.0 Network controller: Intel Corporation Centrino Wireless-N 1030 (rev 34)
0b:00.0 USB controller: Texas Instruments Device 8241 (rev 02)
#
Martin
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: 3.2.11: PCI Express card cannot be re-detected withing cca 60sec timeframe
2012-04-17 9:34 ` Martin Mokrejs
@ 2012-04-17 17:07 ` Yinghai Lu
2012-04-17 19:02 ` Yinghai Lu
0 siblings, 1 reply; 55+ messages in thread
From: Yinghai Lu @ 2012-04-17 17:07 UTC (permalink / raw)
To: Martin Mokrejs; +Cc: Thomas Gleixner, linux-pci, Linux Kernel Mailing List
On Tue, Apr 17, 2012 at 2:34 AM, Martin Mokrejs
<mmokrejs@fold.natur.cuni.cz> wrote:
> Yinghai Lu wrote:
>> On Tue, Apr 17, 2012 at 1:46 AM, Yinghai Lu <yinghai@kernel.org> wrote:
>>> On Tue, Apr 17, 2012 at 12:27 AM, Martin Mokrejs
>>> <mmokrejs@fold.natur.cuni.cz> wrote:
>>>>>
>>>>> can you send out lspci -vvxxxx -s 00:1c.7 after removing USB 3.0 express card?
>>>>
>>>> No, that did not help (tried on 3.4-rc3). First I plugged in the NEC uPD720200 USB3.0 card
>>>> and unplugged it (card removal not reported :(), saved the lspci output.
>>>> Then I inserted the FireWire card, unplugged, again saved the lspci output.
>>>> Finally, saved the dmesg. All three files are attached.
>>>
>>> for USB 3.0:
>>> SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
>>> Changed: MRL- PresDet- LinkState+
>>
>> LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+
>> BWMgmt+ ABWMgmt-
>>
>> link still active even that card get removed, that looks like chipset
>> have problem.
>
> Yinghai,
> so what should I ask Dell for? To fix BIOS of the laptop? What exactly? Or do you think
> this is a hardware issue with the chipset?
after the expresscard get removed, that root port socket status bits
still report Data Link Active, and
the card still present.
Better check with Dell at first, and ask them to talk with intel if
there is silicon bug with that chipset that report wrong status.
Let me check if i could rebase one my local patch do reset pcie link
to prove that problem it silicon related.
Yinghai
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: 3.2.11: PCI Express card cannot be re-detected withing cca 60sec timeframe
2012-04-17 17:07 ` Yinghai Lu
@ 2012-04-17 19:02 ` Yinghai Lu
2012-04-18 17:53 ` Martin Mokrejs
0 siblings, 1 reply; 55+ messages in thread
From: Yinghai Lu @ 2012-04-17 19:02 UTC (permalink / raw)
To: Martin Mokrejs; +Cc: linux-pci, Linux Kernel Mailing List
On Tue, Apr 17, 2012 at 10:07 AM, Yinghai Lu <yinghai@kernel.org> wrote:
> On Tue, Apr 17, 2012 at 2:34 AM, Martin Mokrejs
> <mmokrejs@fold.natur.cuni.cz> wrote:
>> Yinghai Lu wrote:
>>> On Tue, Apr 17, 2012 at 1:46 AM, Yinghai Lu <yinghai@kernel.org> wrote:
>>>> On Tue, Apr 17, 2012 at 12:27 AM, Martin Mokrejs
>>>> <mmokrejs@fold.natur.cuni.cz> wrote:
>>>>>>
>>>>>> can you send out lspci -vvxxxx -s 00:1c.7 after removing USB 3.0 express card?
>>>>>
>>>>> No, that did not help (tried on 3.4-rc3). First I plugged in the NEC uPD720200 USB3.0 card
>>>>> and unplugged it (card removal not reported :(), saved the lspci output.
>>>>> Then I inserted the FireWire card, unplugged, again saved the lspci output.
>>>>> Finally, saved the dmesg. All three files are attached.
>>>>
>>>> for USB 3.0:
>>>> SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
>>>> Changed: MRL- PresDet- LinkState+
>>>
>>> LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+
>>> BWMgmt+ ABWMgmt-
>>>
>>> link still active even that card get removed, that looks like chipset
>>> have problem.
>>
>> Yinghai,
>> so what should I ask Dell for? To fix BIOS of the laptop? What exactly? Or do you think
>> this is a hardware issue with the chipset?
>
> after the expresscard get removed, that root port socket status bits
> still report Data Link Active, and
> the card still present.
>
> Better check with Dell at first, and ask them to talk with intel if
> there is silicon bug with that chipset that report wrong status.
>
> Let me check if i could rebase one my local patch do reset pcie link
> to prove that problem it silicon related.
Rebase patches about pcie link disable/enable in /sys. please check them at
git://git.kernel.org/pub/scm/linux/kernel/git/yinghai/linux-yinghai.git
for-pci-test
PCI, sysfs: merge dev and bus cpuaffinity show handling
PCI, sys: Use is_visable() with boot_vga attribute for pci_dev
PCI, sysfs: Put resource_alignment info pci_bus_attrs array
PCI: Move pcie_link_disable to pcie-link.c
PCI, sysfs: Add pcie attrs for pcie device under pci dev dir.
PCI: Add link_disable in /sysfs for pcie device
it is based on for-pci-root-bus-hotplug branch
Or you can just master branch like
git clone git://git.kernel.org/pub/scm/linux/kernel/git/yinghai/linux-yinghai.git
After you remove USB3 expresscard, you need to
echo 1 > /sys/devices/pci0000\:00/0000\:00\:1c.7/pcie_link_disable
then
echo 0 > /sys/devices/pci0000\:00/0000\:00\:1c.7/pcie_link_disable
Thanks
Yinghai
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: 3.2.11: PCI Express card cannot be re-detected withing cca 60sec timeframe
2012-04-17 19:02 ` Yinghai Lu
@ 2012-04-18 17:53 ` Martin Mokrejs
2012-04-18 19:48 ` Yinghai Lu
0 siblings, 1 reply; 55+ messages in thread
From: Martin Mokrejs @ 2012-04-18 17:53 UTC (permalink / raw)
To: Yinghai Lu; +Cc: linux-pci, Linux Kernel Mailing List
Yinghai Lu wrote:
> On Tue, Apr 17, 2012 at 10:07 AM, Yinghai Lu <yinghai@kernel.org> wrote:
>> On Tue, Apr 17, 2012 at 2:34 AM, Martin Mokrejs
>> <mmokrejs@fold.natur.cuni.cz> wrote:
>>> Yinghai Lu wrote:
>>>> On Tue, Apr 17, 2012 at 1:46 AM, Yinghai Lu <yinghai@kernel.org> wrote:
>>>>> On Tue, Apr 17, 2012 at 12:27 AM, Martin Mokrejs
>>>>> <mmokrejs@fold.natur.cuni.cz> wrote:
>>>>>>>
>>>>>>> can you send out lspci -vvxxxx -s 00:1c.7 after removing USB 3.0 express card?
>>>>>>
>>>>>> No, that did not help (tried on 3.4-rc3). First I plugged in the NEC uPD720200 USB3.0 card
>>>>>> and unplugged it (card removal not reported :(), saved the lspci output.
>>>>>> Then I inserted the FireWire card, unplugged, again saved the lspci output.
>>>>>> Finally, saved the dmesg. All three files are attached.
>>>>>
>>>>> for USB 3.0:
>>>>> SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
>>>>> Changed: MRL- PresDet- LinkState+
>>>>
>>>> LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+
>>>> BWMgmt+ ABWMgmt-
>>>>
>>>> link still active even that card get removed, that looks like chipset
>>>> have problem.
>>>
>>> Yinghai,
>>> so what should I ask Dell for? To fix BIOS of the laptop? What exactly? Or do you think
>>> this is a hardware issue with the chipset?
>>
>> after the expresscard get removed, that root port socket status bits
>> still report Data Link Active, and
>> the card still present.
>>
>> Better check with Dell at first, and ask them to talk with intel if
>> there is silicon bug with that chipset that report wrong status.
>>
>> Let me check if i could rebase one my local patch do reset pcie link
>> to prove that problem it silicon related.
>
> Rebase patches about pcie link disable/enable in /sys. please check them at
>
> git://git.kernel.org/pub/scm/linux/kernel/git/yinghai/linux-yinghai.git
> for-pci-test
>
> PCI, sysfs: merge dev and bus cpuaffinity show handling
> PCI, sys: Use is_visable() with boot_vga attribute for pci_dev
> PCI, sysfs: Put resource_alignment info pci_bus_attrs array
> PCI: Move pcie_link_disable to pcie-link.c
> PCI, sysfs: Add pcie attrs for pcie device under pci dev dir.
> PCI: Add link_disable in /sysfs for pcie device
>
> it is based on for-pci-root-bus-hotplug branch
>
> Or you can just master branch like
> git clone git://git.kernel.org/pub/scm/linux/kernel/git/yinghai/linux-yinghai.git
>
> After you remove USB3 expresscard, you need to
>
> echo 1 > /sys/devices/pci0000\:00/0000\:00\:1c.7/pcie_link_disable
> then
> echo 0 > /sys/devices/pci0000\:00/0000\:00\:1c.7/pcie_link_disable
So without these two echo commands the is no improvement/fix.
[ 686.701306] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 8
[ 686.701316] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
[ 686.701319] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
[ 686.701357] pciehp 0000:00:1c.7:pcie04: Surprise Removal
[ 686.701390] pciehp 0000:00:1c.7:pcie04: check_link_active: lnk_status = 7011
[ 686.809763] pciehp 0000:00:1c.7:pcie04: pciehp_check_link_status: lnk_status = 7011
[ 686.809864] pci 0000:11:00.0: [1033:0194] type 00 class 0x0c0330
[ 686.809914] pci 0000:11:00.0: reg 10: [mem 0x00000000-0x00001fff 64bit]
[ 686.810166] pci 0000:11:00.0: PME# supported from D0 D3hot
[ 686.829795] pci 0000:11:00.0: BAR 0: assigned [mem 0xf6c00000-0xf6c01fff 64bit]
[ 686.829840] pcieport 0000:00:1c.7: PCI bridge to [bus 11-16]
[ 686.829843] pcieport 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
[ 686.829848] pcieport 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff]
[ 686.829852] pcieport 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
[ 686.829991] xhci_hcd 0000:11:00.0: enabling device (0100 -> 0102)
[ 686.830048] xhci_hcd 0000:11:00.0: xHCI Host Controller
[ 686.830054] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 5
[ 686.830348] xhci_hcd 0000:11:00.0: irq 19, io mem 0xf6c00000
[ 686.830466] xhci_hcd 0000:11:00.0: irq 54 for MSI/MSI-X
[ 686.830473] xhci_hcd 0000:11:00.0: irq 55 for MSI/MSI-X
[ 686.830479] xhci_hcd 0000:11:00.0: irq 56 for MSI/MSI-X
[ 686.830485] xhci_hcd 0000:11:00.0: irq 57 for MSI/MSI-X
[ 686.830492] xhci_hcd 0000:11:00.0: irq 58 for MSI/MSI-X
[ 686.830654] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 686.830656] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 686.830657] usb usb5: Product: xHCI Host Controller
[ 686.830658] usb usb5: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
[ 686.830660] usb usb5: SerialNumber: 0000:11:00.0
[ 686.830782] xHCI xhci_add_endpoint called for root hub
[ 686.830784] xHCI xhci_check_bandwidth called for root hub
[ 686.830807] hub 5-0:1.0: USB hub found
[ 686.830819] hub 5-0:1.0: 2 ports detected
[ 686.830921] xhci_hcd 0000:11:00.0: xHCI Host Controller
[ 686.830925] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 6
[ 686.833581] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[ 686.833583] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 686.833585] usb usb6: Product: xHCI Host Controller
[ 686.833586] usb usb6: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
[ 686.833587] usb usb6: SerialNumber: 0000:11:00.0
[ 686.833639] xHCI xhci_add_endpoint called for root hub
[ 686.833641] xHCI xhci_check_bandwidth called for root hub
[ 686.833666] hub 6-0:1.0: USB hub found
[ 686.833678] hub 6-0:1.0: 2 ports detected
echo 1 > /sys/devices/pci0000\:00/0000\:00\:1c.7/pcie_link_disable
[ 716.999938] pcieport 0000:00:1c.7: pcie_link_disable_set: lnk_ctrl = 53
[ 717.024647] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 8
[ 717.024657] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
[ 717.024665] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
[ 717.024723] pciehp 0000:00:1c.7:pcie04: Surprise Removal
[ 717.024753] pciehp 0000:00:1c.7:pcie04: Disabling domain:bus:device=0000:11:00
[ 717.024756] pciehp 0000:00:1c.7:pcie04: pciehp_unconfigure_device: domain:bus:dev = 0000:11:00
[ 717.044828] xhci_hcd 0000:11:00.0: remove, state 4
[ 717.044834] usb usb6: USB disconnect, device number 1
[ 717.044877] xHCI xhci_drop_endpoint called for root hub
[ 717.044885] xHCI xhci_check_bandwidth called for root hub
[ 717.044964] xhci_hcd 0000:11:00.0: Host not halted after 16000 microseconds.
[ 717.044967] xhci_hcd 0000:11:00.0: USB bus 6 deregistered
[ 717.044971] xhci_hcd 0000:11:00.0: remove, state 4
[ 717.044974] usb usb5: USB disconnect, device number 1
[ 717.045000] xHCI xhci_drop_endpoint called for root hub
[ 717.045001] xHCI xhci_check_bandwidth called for root hub
[ 717.045053] xhci_hcd 0000:11:00.0: Host not halted after 16000 microseconds.
[ 717.045138] xhci_hcd 0000:11:00.0: USB bus 5 deregistered
[ 717.045197] pci 0000:11:00.0: freeing pci_dev info
echo 0 > /sys/devices/pci0000\:00/0000\:00\:1c.7/pcie_link_disable
[ 748.456914] pcieport 0000:00:1c.7: pcie_link_disable_set: lnk_ctrl = 40
Martin
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: 3.2.11: PCI Express card cannot be re-detected withing cca 60sec timeframe
2012-04-18 17:53 ` Martin Mokrejs
@ 2012-04-18 19:48 ` Yinghai Lu
2012-04-18 20:29 ` Martin Mokrejs
` (2 more replies)
0 siblings, 3 replies; 55+ messages in thread
From: Yinghai Lu @ 2012-04-18 19:48 UTC (permalink / raw)
To: Martin Mokrejs; +Cc: linux-pci, Linux Kernel Mailing List
On Wed, Apr 18, 2012 at 10:53 AM, Martin Mokrejs
<mmokrejs@fold.natur.cuni.cz> wrote:
>> After you remove USB3 expresscard, you need to
>>
>> echo 1 > /sys/devices/pci0000\:00/0000\:00\:1c.7/pcie_link_disable
>> then
>> echo 0 > /sys/devices/pci0000\:00/0000\:00\:1c.7/pcie_link_disable
>
> So without these two echo commands the is no improvement/fix.
>
> [ 686.701306] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 8
> [ 686.701316] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
> [ 686.701319] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
> [ 686.701357] pciehp 0000:00:1c.7:pcie04: Surprise Removal
> [ 686.701390] pciehp 0000:00:1c.7:pcie04: check_link_active: lnk_status = 7011
> [ 686.809763] pciehp 0000:00:1c.7:pcie04: pciehp_check_link_status: lnk_status = 7011
...
> [ 686.833678] hub 6-0:1.0: 2 ports detected
>
> echo 1 > /sys/devices/pci0000\:00/0000\:00\:1c.7/pcie_link_disable
>
> [ 716.999938] pcieport 0000:00:1c.7: pcie_link_disable_set: lnk_ctrl = 53
> [ 717.024647] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 8
> [ 717.024657] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
> [ 717.024665] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
> [ 717.024723] pciehp 0000:00:1c.7:pcie04: Surprise Removal
> [ 717.024753] pciehp 0000:00:1c.7:pcie04: Disabling domain:bus:device=0000:11:00
> [ 717.024756] pciehp 0000:00:1c.7:pcie04: pciehp_unconfigure_device: domain:bus:dev = 0000:11:00
..
> [ 717.045197] pci 0000:11:00.0: freeing pci_dev info
>
> echo 0 > /sys/devices/pci0000\:00/0000\:00\:1c.7/pcie_link_disable
>
> [ 748.456914] pcieport 0000:00:1c.7: pcie_link_disable_set: lnk_ctrl = 40
>
so it is chipset problem, it does not detect and report the presence
of the card after that link is removed.
Can you try to use acpiphp instead of pciehp?
Yinghai
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: 3.2.11: PCI Express card cannot be re-detected withing cca 60sec timeframe
2012-04-18 19:48 ` Yinghai Lu
@ 2012-04-18 20:29 ` Martin Mokrejs
2012-04-18 20:58 ` Yinghai Lu
2012-04-19 17:32 ` Martin Mokrejs
2012-05-04 15:58 ` Martin Mokrejs
2 siblings, 1 reply; 55+ messages in thread
From: Martin Mokrejs @ 2012-04-18 20:29 UTC (permalink / raw)
To: Yinghai Lu; +Cc: linux-pci, Linux Kernel Mailing List
[-- Attachment #1: Type: text/plain, Size: 2155 bytes --]
Yinghai Lu wrote:
> On Wed, Apr 18, 2012 at 10:53 AM, Martin Mokrejs
> <mmokrejs@fold.natur.cuni.cz> wrote:
>>> After you remove USB3 expresscard, you need to
>>>
>>> echo 1 > /sys/devices/pci0000\:00/0000\:00\:1c.7/pcie_link_disable
>>> then
>>> echo 0 > /sys/devices/pci0000\:00/0000\:00\:1c.7/pcie_link_disable
>>
>> So without these two echo commands the is no improvement/fix.
>>
>> [ 686.701306] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 8
>> [ 686.701316] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
>> [ 686.701319] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
>> [ 686.701357] pciehp 0000:00:1c.7:pcie04: Surprise Removal
>> [ 686.701390] pciehp 0000:00:1c.7:pcie04: check_link_active: lnk_status = 7011
>> [ 686.809763] pciehp 0000:00:1c.7:pcie04: pciehp_check_link_status: lnk_status = 7011
> ...
>> [ 686.833678] hub 6-0:1.0: 2 ports detected
>>
>> echo 1 > /sys/devices/pci0000\:00/0000\:00\:1c.7/pcie_link_disable
>>
>> [ 716.999938] pcieport 0000:00:1c.7: pcie_link_disable_set: lnk_ctrl = 53
>> [ 717.024647] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 8
>> [ 717.024657] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
>> [ 717.024665] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
>> [ 717.024723] pciehp 0000:00:1c.7:pcie04: Surprise Removal
>> [ 717.024753] pciehp 0000:00:1c.7:pcie04: Disabling domain:bus:device=0000:11:00
>> [ 717.024756] pciehp 0000:00:1c.7:pcie04: pciehp_unconfigure_device: domain:bus:dev = 0000:11:00
> ..
>> [ 717.045197] pci 0000:11:00.0: freeing pci_dev info
>>
>> echo 0 > /sys/devices/pci0000\:00/0000\:00\:1c.7/pcie_link_disable
>>
>> [ 748.456914] pcieport 0000:00:1c.7: pcie_link_disable_set: lnk_ctrl = 40
>>
>
> so it is chipset problem, it does not detect and report the presence
> of the card after that link is removed.
Why doesn't this happen with the FireWire express card?
>
> Can you try to use acpiphp instead of pciehp?
Umm. I do have acpiphp in my kernel already. I am rather attaching my .config,
please me know what you want me to do. My kernel command line could be seen
in my previous posts in the dmesg file.
Martin
[-- Attachment #2: .config --]
[-- Type: text/plain, Size: 85322 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/x86_64 3.4.0-rc3 Kernel Configuration
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_CPU_AUTOPROBE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_HAVE_INTEL_TXT=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11"
# CONFIG_KTIME_SCALAR is not set
CONFIG_ARCH_CPU_PROBE_RELEASE=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_HAVE_IRQ_WORK=y
CONFIG_IRQ_WORK=y
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION="-default"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
CONFIG_KERNEL_XZ=y
# CONFIG_KERNEL_LZO is not set
CONFIG_DEFAULT_HOSTNAME="vostro"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_FHANDLE=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
# CONFIG_TASK_XACCT is not set
# CONFIG_AUDIT is not set
CONFIG_HAVE_GENERIC_HARDIRQS=y
#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_PREEMPT_RCU is not set
CONFIG_RCU_FANOUT=64
# CONFIG_RCU_FANOUT_EXACT is not set
CONFIG_RCU_FAST_NO_HZ=y
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=18
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
# CONFIG_CGROUP_FREEZER is not set
# CONFIG_CGROUP_DEVICE is not set
# CONFIG_CPUSETS is not set
# CONFIG_CGROUP_CPUACCT is not set
# CONFIG_RESOURCE_COUNTERS is not set
# CONFIG_CGROUP_PERF is not set
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_CFS_BANDWIDTH is not set
# CONFIG_RT_GROUP_SCHED is not set
# CONFIG_BLK_CGROUP is not set
# CONFIG_CHECKPOINT_RESTORE is not set
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EXPERT is not set
CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_PERF_COUNTERS is not set
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_PROFILING is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
# CONFIG_KPROBES is not set
CONFIG_JUMP_LABEL=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_PADATA=y
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
CONFIG_INLINE_READ_UNLOCK=y
# CONFIG_INLINE_READ_UNLOCK_BH is not set
CONFIG_INLINE_READ_UNLOCK_IRQ=y
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
CONFIG_INLINE_WRITE_UNLOCK=y
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_FREEZER=y
#
# Processor type and features
#
CONFIG_ZONE_DMA=y
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_SMP=y
CONFIG_X86_X2APIC=y
# CONFIG_X86_MPPARSE is not set
# CONFIG_X86_EXTENDED_PLATFORM is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
CONFIG_NO_BOOTMEM=y
# CONFIG_MEMTEST is not set
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
CONFIG_MCORE2=y
# CONFIG_MATOM is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_P6_NOP=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
# CONFIG_MAXSMP is not set
CONFIG_NR_CPUS=4
# CONFIG_SCHED_SMT is not set
CONFIG_SCHED_MC=y
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
# CONFIG_X86_MCE_AMD is not set
CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_X86_MCE_INJECT is not set
CONFIG_X86_THERMAL_VECTOR=y
CONFIG_I8K=y
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
# CONFIG_MICROCODE_AMD is not set
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_DIRECT_GBPAGES=y
CONFIG_NUMA=y
# CONFIG_AMD_NUMA is not set
CONFIG_X86_64_ACPI_NUMA=y
CONFIG_NODES_SPAN_OTHER_NODES=y
# CONFIG_NUMA_EMU is not set
CONFIG_NODES_SHIFT=6
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
CONFIG_MEMORY_FAILURE=y
# CONFIG_HWPOISON_INJECT is not set
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
CONFIG_CLEANCACHE=y
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
# CONFIG_EFI is not set
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
CONFIG_HZ_100=y
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
CONFIG_KEXEC_JUMP=y
CONFIG_PHYSICAL_START=0x200000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_USE_PERCPU_NUMA_NODE_ID=y
#
# Power management and ACPI options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION="/dev/sda6"
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_RUNTIME=y
CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_PM_ADVANCED_DEBUG=y
# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_CAN_PM_TRACE=y
# CONFIG_PM_TRACE_RTC is not set
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS=y
# CONFIG_ACPI_PROCFS_POWER is not set
CONFIG_ACPI_EC_DEBUGFS=y
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_IPMI=m
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_NUMA=y
CONFIG_ACPI_CUSTOM_DSDT_FILE=""
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_SCI_EMULATE is not set
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_PCI_SLOT=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_SBS=m
CONFIG_ACPI_HED=y
# CONFIG_ACPI_CUSTOM_METHOD is not set
# CONFIG_ACPI_BGRT is not set
CONFIG_ACPI_APEI=y
CONFIG_ACPI_APEI_GHES=y
CONFIG_ACPI_APEI_PCIEAER=y
# CONFIG_ACPI_APEI_MEMORY_FAILURE is not set
# CONFIG_ACPI_APEI_EINJ is not set
# CONFIG_ACPI_APEI_ERST_DEBUG is not set
# CONFIG_SFI is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_STAT_DETAILS=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
#
# x86 CPU frequency scaling drivers
#
# CONFIG_X86_PCC_CPUFREQ is not set
CONFIG_X86_ACPI_CPUFREQ=y
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_P4_CLOCKMOD is not set
#
# shared options
#
# CONFIG_X86_SPEEDSTEP_LIB is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
CONFIG_INTEL_IDLE=y
#
# Memory power savings
#
# CONFIG_I7300_IDLE is not set
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
CONFIG_PCIEAER=y
CONFIG_PCIE_ECRC=y
# CONFIG_PCIEAER_INJECT is not set
CONFIG_PCIEASPM=y
CONFIG_PCIEASPM_DEBUG=y
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
CONFIG_PCI_STUB=y
CONFIG_HT_IRQ=y
CONFIG_PCI_ATS=y
CONFIG_PCI_IOV=y
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
CONFIG_PCI_IOAPIC=y
CONFIG_PCI_LABEL=y
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y
# CONFIG_PCCARD is not set
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_FAKE is not set
CONFIG_HOTPLUG_PCI_ACPI=y
# CONFIG_HOTPLUG_PCI_ACPI_IBM is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
CONFIG_HOTPLUG_PCI_SHPC=m
# CONFIG_RAPIDIO is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
CONFIG_IA32_EMULATION=y
CONFIG_IA32_AOUT=y
# CONFIG_X86_X32 is not set
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_KEYS_COMPAT=y
CONFIG_HAVE_TEXT_POKE_SMP=y
CONFIG_NET=y
CONFIG_COMPAT_NETLINK_MESSAGES=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_UNIX_DIAG=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
# CONFIG_NET_IPGRE_DEMUX is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
CONFIG_INET_UDP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
#
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK_ACCT is not set
# CONFIG_NETFILTER_NETLINK_QUEUE is not set
# CONFIG_NETFILTER_NETLINK_LOG is not set
# CONFIG_NF_CONNTRACK is not set
CONFIG_NETFILTER_XTABLES=m
#
# Xtables combined modules
#
# CONFIG_NETFILTER_XT_MARK is not set
#
# Xtables targets
#
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
# CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set
# CONFIG_NETFILTER_XT_TARGET_LED is not set
# CONFIG_NETFILTER_XT_TARGET_LOG is not set
# CONFIG_NETFILTER_XT_TARGET_MARK is not set
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
# CONFIG_NETFILTER_XT_TARGET_TEE is not set
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
#
# Xtables matches
#
# CONFIG_NETFILTER_XT_MATCH_ADDRTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
# CONFIG_NETFILTER_XT_MATCH_CPU is not set
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
# CONFIG_NETFILTER_XT_MATCH_DEVGROUP is not set
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
CONFIG_NETFILTER_XT_MATCH_ECN=m
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
CONFIG_NETFILTER_XT_MATCH_HL=m
# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_MAC is not set
# CONFIG_NETFILTER_XT_MATCH_MARK is not set
# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
# CONFIG_NETFILTER_XT_MATCH_NFACCT is not set
# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
CONFIG_NETFILTER_XT_MATCH_SCTP=m
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
# CONFIG_NETFILTER_XT_MATCH_STRING is not set
# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
CONFIG_IP_VS=m
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#
# CONFIG_IP_VS_PROTO_TCP is not set
# CONFIG_IP_VS_PROTO_UDP is not set
# CONFIG_IP_VS_PROTO_AH_ESP is not set
# CONFIG_IP_VS_PROTO_ESP is not set
# CONFIG_IP_VS_PROTO_AH is not set
# CONFIG_IP_VS_PROTO_SCTP is not set
#
# IPVS scheduler
#
# CONFIG_IP_VS_RR is not set
# CONFIG_IP_VS_WRR is not set
# CONFIG_IP_VS_LC is not set
# CONFIG_IP_VS_WLC is not set
# CONFIG_IP_VS_LBLC is not set
# CONFIG_IP_VS_LBLCR is not set
# CONFIG_IP_VS_DH is not set
# CONFIG_IP_VS_SH is not set
# CONFIG_IP_VS_SED is not set
# CONFIG_IP_VS_NQ is not set
#
# IPVS SH scheduler
#
CONFIG_IP_VS_SH_TAB_BITS=8
#
# IPVS application helper
#
#
# IP: Netfilter Configuration
#
# CONFIG_NF_DEFRAG_IPV4 is not set
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
# CONFIG_IP_NF_MATCH_RPFILTER is not set
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
# CONFIG_IP_NF_TARGET_REJECT is not set
# CONFIG_IP_NF_TARGET_ULOG is not set
# CONFIG_IP_NF_MANGLE is not set
# CONFIG_IP_NF_RAW is not set
# CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=y
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
CONFIG_L2TP=m
# CONFIG_L2TP_DEBUGFS is not set
CONFIG_L2TP_V3=y
CONFIG_L2TP_IP=m
CONFIG_L2TP_ETH=m
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
CONFIG_IEEE802154=m
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
CONFIG_DNS_RESOLVER=y
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
# CONFIG_NETPRIO_CGROUP is not set
CONFIG_BQL=y
CONFIG_HAVE_BPF_JIT=y
CONFIG_BPF_JIT=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
CONFIG_BT=y
CONFIG_BT_RFCOMM=y
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=y
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=y
#
# Bluetooth device drivers
#
CONFIG_BT_HCIBTUSB=y
CONFIG_BT_HCIBTSDIO=m
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_ATH3K=y
CONFIG_BT_HCIUART_LL=y
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIVHCI=m
CONFIG_BT_MRVL=m
CONFIG_BT_MRVL_SDIO=m
CONFIG_BT_ATH3K=m
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_CFG80211=y
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_REG_DEBUG is not set
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not set
# CONFIG_CFG80211_INTERNAL_REGDB is not set
CONFIG_CFG80211_WEXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
# CONFIG_LIB80211 is not set
CONFIG_MAC80211=y
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_MINSTREL_HT=y
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
# CONFIG_MAC80211_MESH is not set
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
# CONFIG_WIMAX is not set
CONFIG_RFKILL=y
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
CONFIG_RFKILL_REGULATOR=y
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=m
CONFIG_DMA_SHARED_BUFFER=y
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=m
# CONFIG_PARIDE is not set
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
CONFIG_BLK_DEV_CRYPTOLOOP=y
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_NVME is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_VIRTIO_BLK=m
# CONFIG_BLK_DEV_HD is not set
# CONFIG_BLK_DEV_RBD is not set
#
# Misc devices
#
# CONFIG_SENSORS_LIS3LV02D is not set
# CONFIG_AD525X_DPOT is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_INTEL_MID_PTI is not set
# CONFIG_SGI_IOC4 is not set
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1780 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
CONFIG_VMWARE_BALLOON=m
# CONFIG_BMP085 is not set
# CONFIG_PCH_PHUB is not set
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
CONFIG_CB710_CORE=m
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y
# CONFIG_IWMC3200TOP is not set
#
# Texas Instruments shared transport line discipline
#
# CONFIG_SENSORS_LIS3_I2C is not set
#
# Altera FPGA firmware download module
#
# CONFIG_ALTERA_STAPL is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y
#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=y
# CONFIG_SATA_AHCI_PLATFORM is not set
CONFIG_SATA_INIC162X=m
CONFIG_SATA_ACARD_AHCI=m
CONFIG_SATA_SIL24=m
CONFIG_ATA_SFF=y
#
# SFF controllers with custom DMA interface
#
CONFIG_PDC_ADMA=m
CONFIG_SATA_QSTOR=m
CONFIG_SATA_SX4=m
CONFIG_ATA_BMDMA=y
#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=y
CONFIG_SATA_MV=m
CONFIG_SATA_NV=m
CONFIG_SATA_PROMISE=m
CONFIG_SATA_SIL=m
CONFIG_SATA_SIS=m
CONFIG_SATA_SVW=m
CONFIG_SATA_ULI=m
CONFIG_SATA_VIA=m
CONFIG_SATA_VITESSE=m
#
# PATA SFF controllers with BMDMA
#
CONFIG_PATA_ALI=m
CONFIG_PATA_AMD=m
CONFIG_PATA_ARASAN_CF=m
CONFIG_PATA_ARTOP=m
CONFIG_PATA_ATIIXP=m
CONFIG_PATA_ATP867X=m
CONFIG_PATA_CMD64X=m
CONFIG_PATA_CS5520=m
CONFIG_PATA_CS5530=m
CONFIG_PATA_CS5536=m
CONFIG_PATA_CYPRESS=m
CONFIG_PATA_EFAR=m
CONFIG_PATA_HPT366=m
CONFIG_PATA_HPT37X=m
CONFIG_PATA_HPT3X2N=m
CONFIG_PATA_HPT3X3=m
CONFIG_PATA_HPT3X3_DMA=y
CONFIG_PATA_IT8213=m
CONFIG_PATA_IT821X=m
CONFIG_PATA_JMICRON=m
CONFIG_PATA_MARVELL=m
CONFIG_PATA_NETCELL=m
CONFIG_PATA_NINJA32=m
CONFIG_PATA_NS87415=m
CONFIG_PATA_OLDPIIX=m
CONFIG_PATA_OPTIDMA=m
CONFIG_PATA_PDC2027X=m
CONFIG_PATA_PDC_OLD=m
CONFIG_PATA_RADISYS=m
CONFIG_PATA_RDC=m
CONFIG_PATA_SC1200=m
CONFIG_PATA_SCH=m
CONFIG_PATA_SERVERWORKS=m
CONFIG_PATA_SIL680=m
CONFIG_PATA_SIS=m
CONFIG_PATA_TOSHIBA=m
CONFIG_PATA_TRIFLEX=m
CONFIG_PATA_VIA=m
CONFIG_PATA_WINBOND=m
#
# PIO-only SFF controllers
#
CONFIG_PATA_CMD640_PCI=m
CONFIG_PATA_MPIIX=m
CONFIG_PATA_NS87410=m
CONFIG_PATA_OPTI=m
CONFIG_PATA_RZ1000=m
#
# Generic fallback / legacy drivers
#
# CONFIG_PATA_ACPI is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_LEGACY is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=y
CONFIG_MD_RAID456=y
CONFIG_MULTICORE_RAID456=y
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not set
CONFIG_DM_BUFIO=y
CONFIG_DM_PERSISTENT_DATA=y
CONFIG_DM_CRYPT=y
CONFIG_DM_SNAPSHOT=y
CONFIG_DM_THIN_PROVISIONING=y
# CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set
# CONFIG_DM_DEBUG_SPACE_MAPS is not set
CONFIG_DM_MIRROR=y
CONFIG_DM_RAID=y
CONFIG_DM_LOG_USERSPACE=y
CONFIG_DM_ZERO=y
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
# CONFIG_DM_FLAKEY is not set
# CONFIG_DM_VERITY is not set
# CONFIG_TARGET_CORE is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_SBP2=m
CONFIG_FIREWIRE_NET=m
# CONFIG_FIREWIRE_NOSY is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
# CONFIG_BONDING is not set
# CONFIG_DUMMY is not set
# CONFIG_EQUALIZER is not set
# CONFIG_NET_FC is not set
CONFIG_MII=y
# CONFIG_IEEE802154_DRIVERS is not set
# CONFIG_NET_TEAM is not set
# CONFIG_MACVLAN is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
CONFIG_TUN=y
# CONFIG_VETH is not set
CONFIG_VIRTIO_NET=m
# CONFIG_ARCNET is not set
#
# CAIF transport drivers
#
CONFIG_ETHERNET=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_ADAPTEC is not set
# CONFIG_NET_VENDOR_ALTEON is not set
# CONFIG_NET_VENDOR_AMD is not set
# CONFIG_NET_VENDOR_ATHEROS is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_BROCADE is not set
# CONFIG_NET_CALXEDA_XGMAC is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
# CONFIG_NET_VENDOR_CISCO is not set
# CONFIG_DNET is not set
# CONFIG_NET_VENDOR_DEC is not set
# CONFIG_NET_VENDOR_DLINK is not set
# CONFIG_NET_VENDOR_EMULEX is not set
# CONFIG_NET_VENDOR_EXAR is not set
# CONFIG_NET_VENDOR_HP is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_IP1000 is not set
# CONFIG_JME is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MELLANOX is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_MYRI is not set
# CONFIG_FEALNX is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_NVIDIA is not set
# CONFIG_NET_VENDOR_OKI is not set
# CONFIG_ETHOC is not set
# CONFIG_NET_PACKET_ENGINE is not set
# CONFIG_NET_VENDOR_QLOGIC is not set
CONFIG_NET_VENDOR_REALTEK=y
# CONFIG_ATP is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
CONFIG_R8169=y
# CONFIG_NET_VENDOR_RDC is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SILAN is not set
# CONFIG_NET_VENDOR_SIS is not set
# CONFIG_SFC is not set
# CONFIG_NET_VENDOR_SMSC is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SUN is not set
# CONFIG_NET_VENDOR_TEHUTI is not set
# CONFIG_NET_VENDOR_TI is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_NET_SB1000 is not set
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
# CONFIG_AMD_PHY is not set
# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
CONFIG_REALTEK_PHY=y
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_MICREL_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_FILTER=y
CONFIG_PPP_MPPE=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPPOE=m
CONFIG_PPPOL2TP=m
CONFIG_PPP_ASYNC=m
# CONFIG_PPP_SYNC_TTY is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=m
# CONFIG_TR is not set
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
CONFIG_USB_USBNET=m
# CONFIG_USB_NET_AX8817X is not set
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_CDC_EEM=m
CONFIG_USB_NET_CDC_NCM=m
# CONFIG_USB_NET_DM9601 is not set
# CONFIG_USB_NET_SMSC75XX is not set
# CONFIG_USB_NET_SMSC95XX is not set
# CONFIG_USB_NET_GL620A is not set
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
# CONFIG_USB_NET_MCS7830 is not set
# CONFIG_USB_NET_RNDIS_HOST is not set
CONFIG_USB_NET_CDC_SUBSET=m
# CONFIG_USB_ALI_M5632 is not set
# CONFIG_USB_AN2720 is not set
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
# CONFIG_USB_EPSON2888 is not set
# CONFIG_USB_KC2190 is not set
CONFIG_USB_NET_ZAURUS=m
# CONFIG_USB_NET_CX82310_ETH is not set
# CONFIG_USB_NET_KALMIA is not set
# CONFIG_USB_NET_QMI_WWAN is not set
CONFIG_USB_HSO=m
# CONFIG_USB_NET_INT51X1 is not set
CONFIG_USB_IPHETH=m
# CONFIG_USB_SIERRA_NET is not set
# CONFIG_USB_VL600 is not set
CONFIG_WLAN=y
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_AIRO is not set
# CONFIG_ATMEL is not set
# CONFIG_AT76C50X_USB is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_RTL8180 is not set
# CONFIG_RTL8187 is not set
# CONFIG_ADM8211 is not set
# CONFIG_MAC80211_HWSIM is not set
# CONFIG_MWL8K is not set
# CONFIG_ATH_COMMON is not set
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_BRCMFMAC is not set
# CONFIG_HOSTAP is not set
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
CONFIG_IWLWIFI=m
#
# Debugging Options
#
CONFIG_IWLWIFI_DEBUG=y
# CONFIG_IWLWIFI_DEBUG_EXPERIMENTAL_UCODE is not set
# CONFIG_IWLWIFI_P2P is not set
# CONFIG_IWLWIFI_EXPERIMENTAL_MFP is not set
# CONFIG_IWL4965 is not set
# CONFIG_IWL3945 is not set
# CONFIG_IWM is not set
# CONFIG_LIBERTAS is not set
# CONFIG_HERMES is not set
# CONFIG_P54_COMMON is not set
# CONFIG_RT2X00 is not set
# CONFIG_RTL8192CE is not set
# CONFIG_RTL8192SE is not set
# CONFIG_RTL8192DE is not set
# CONFIG_RTL8192CU is not set
# CONFIG_WL1251 is not set
# CONFIG_WL12XX_MENU is not set
# CONFIG_ZD1211RW is not set
# CONFIG_MWIFIEX is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set
CONFIG_VMXNET3=y
# CONFIG_ISDN is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=m
CONFIG_INPUT_SPARSEKMAP=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_OMAP4 is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_MOUSE_SYNAPTICS_USB is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_BMA150 is not set
# CONFIG_INPUT_PCSPKR is not set
# CONFIG_INPUT_MMA8450 is not set
# CONFIG_INPUT_MPU3050 is not set
# CONFIG_INPUT_APANEL is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_KXTJ9 is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
# CONFIG_INPUT_UINPUT is not set
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_CMA3000 is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
# CONFIG_N_GSM is not set
CONFIG_TRACE_ROUTER=m
CONFIG_TRACE_SINK=m
CONFIG_DEVKMEM=y
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MFD_HSU is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_PCH_UART is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
CONFIG_HVC_DRIVER=y
CONFIG_VIRTIO_CONSOLE=m
CONFIG_IPMI_HANDLER=y
CONFIG_IPMI_PANIC_EVENT=y
# CONFIG_IPMI_PANIC_STRING is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=y
CONFIG_HW_RANDOM_INTEL=y
# CONFIG_HW_RANDOM_AMD is not set
# CONFIG_HW_RANDOM_VIA is not set
# CONFIG_HW_RANDOM_VIRTIO is not set
CONFIG_NVRAM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=y
CONFIG_TCG_TPM=y
CONFIG_TCG_TIS=m
CONFIG_TCG_NSC=m
CONFIG_TCG_ATMEL=m
CONFIG_TCG_INFINEON=m
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
# CONFIG_RAMOOPS is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
# CONFIG_I2C_MUX is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_I801=m
CONFIG_I2C_ISCH=m
CONFIG_I2C_PIIX4=m
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
#
# ACPI drivers
#
CONFIG_I2C_SCMI=y
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_EG20T is not set
# CONFIG_I2C_INTEL_MID is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_PXA_PCI is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_SPI is not set
# CONFIG_HSI is not set
#
# PPS support
#
# CONFIG_PPS is not set
#
# PPS generators support
#
#
# PTP clock support
#
#
# Enable Device Drivers -> PPS to see the PTP clock options.
#
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
CONFIG_W1=m
# CONFIG_W1_CON is not set
#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_MATROX is not set
# CONFIG_W1_MASTER_DS2490 is not set
# CONFIG_W1_MASTER_DS2482 is not set
# CONFIG_W1_MASTER_DS1WM is not set
#
# 1-wire Slaves
#
# CONFIG_W1_SLAVE_THERM is not set
# CONFIG_W1_SLAVE_SMEM is not set
# CONFIG_W1_SLAVE_DS2408 is not set
# CONFIG_W1_SLAVE_DS2423 is not set
# CONFIG_W1_SLAVE_DS2431 is not set
# CONFIG_W1_SLAVE_DS2433 is not set
# CONFIG_W1_SLAVE_DS2760 is not set
CONFIG_W1_SLAVE_DS2780=m
CONFIG_W1_SLAVE_DS2781=m
# CONFIG_W1_SLAVE_BQ27000 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
CONFIG_BATTERY_DS2780=m
CONFIG_BATTERY_DS2781=m
CONFIG_BATTERY_DS2782=m
CONFIG_BATTERY_SBS=m
CONFIG_BATTERY_BQ27x00=m
CONFIG_BATTERY_BQ27X00_I2C=y
CONFIG_BATTERY_BQ27X00_PLATFORM=y
CONFIG_BATTERY_MAX17040=m
CONFIG_BATTERY_MAX17042=m
CONFIG_CHARGER_MAX8903=m
CONFIG_CHARGER_LP8727=m
# CONFIG_CHARGER_MANAGER is not set
CONFIG_CHARGER_SMB347=m
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
CONFIG_HWMON_DEBUG_CHIP=y
#
# Native drivers
#
CONFIG_SENSORS_ABITUGURU=m
CONFIG_SENSORS_ABITUGURU3=m
CONFIG_SENSORS_AD7414=m
CONFIG_SENSORS_AD7418=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_ADT7411=m
CONFIG_SENSORS_ADT7462=m
CONFIG_SENSORS_ADT7470=m
CONFIG_SENSORS_ADT7475=m
CONFIG_SENSORS_ASC7621=m
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_K10TEMP=m
CONFIG_SENSORS_FAM15H_POWER=m
CONFIG_SENSORS_ASB100=m
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS620=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_I5K_AMB=m
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_F71882FG=m
CONFIG_SENSORS_F75375S=m
CONFIG_SENSORS_FSCHMD=m
CONFIG_SENSORS_G760A=m
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_CORETEMP=y
CONFIG_SENSORS_IBMAEM=m
CONFIG_SENSORS_IBMPEX=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_JC42=m
CONFIG_SENSORS_LINEAGE=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM73=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_LM93=m
CONFIG_SENSORS_LTC4151=m
CONFIG_SENSORS_LTC4215=m
CONFIG_SENSORS_LTC4245=m
CONFIG_SENSORS_LTC4261=m
CONFIG_SENSORS_LM95241=m
CONFIG_SENSORS_LM95245=m
CONFIG_SENSORS_MAX16065=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX1668=m
CONFIG_SENSORS_MAX6639=y
CONFIG_SENSORS_MAX6642=m
CONFIG_SENSORS_MAX6650=m
CONFIG_SENSORS_MCP3021=m
CONFIG_SENSORS_NTC_THERMISTOR=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
CONFIG_SENSORS_PCF8591=m
CONFIG_PMBUS=m
CONFIG_SENSORS_PMBUS=m
# CONFIG_SENSORS_ADM1275 is not set
# CONFIG_SENSORS_LM25066 is not set
# CONFIG_SENSORS_LTC2978 is not set
# CONFIG_SENSORS_MAX16064 is not set
# CONFIG_SENSORS_MAX34440 is not set
# CONFIG_SENSORS_MAX8688 is not set
# CONFIG_SENSORS_UCD9000 is not set
# CONFIG_SENSORS_UCD9200 is not set
# CONFIG_SENSORS_ZL6100 is not set
CONFIG_SENSORS_SHT21=m
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_SMM665=m
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_EMC1403=m
CONFIG_SENSORS_EMC2103=m
CONFIG_SENSORS_EMC6W201=m
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_SCH56XX_COMMON=m
CONFIG_SENSORS_SCH5627=m
CONFIG_SENSORS_SCH5636=m
CONFIG_SENSORS_ADS1015=m
CONFIG_SENSORS_ADS7828=m
CONFIG_SENSORS_AMC6821=m
CONFIG_SENSORS_THMC50=m
CONFIG_SENSORS_TMP102=m
CONFIG_SENSORS_TMP401=m
CONFIG_SENSORS_TMP421=m
CONFIG_SENSORS_VIA_CPUTEMP=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83795=m
# CONFIG_SENSORS_W83795_FANCTRL is not set
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83L786NG=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
CONFIG_SENSORS_APPLESMC=m
#
# ACPI drivers
#
CONFIG_SENSORS_ACPI_POWER=m
CONFIG_SENSORS_ATK0110=m
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_F71808E_WDT is not set
# CONFIG_SP5100_TCO is not set
# CONFIG_SC520_WDT is not set
# CONFIG_SBC_FITPC2_WATCHDOG is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
CONFIG_WAFER_WDT=m
CONFIG_I6300ESB_WDT=m
CONFIG_ITCO_WDT=y
CONFIG_ITCO_VENDOR_SUPPORT=y
CONFIG_IT8712F_WDT=m
CONFIG_IT87_WDT=m
CONFIG_HP_WATCHDOG=y
# CONFIG_HPWDT_NMI_DECODING is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
# CONFIG_NV_TCO is not set
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC_SCH311X_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_VIA_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83697HF_WDT is not set
# CONFIG_W83697UG_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
#
# Broadcom specific AMBA
#
# CONFIG_BCMA is not set
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=m
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS6507X is not set
CONFIG_MFD_TPS65217=m
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_STMPE is not set
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_S5M_CORE is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_CS5535 is not set
CONFIG_LPC_SCH=m
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_VX855 is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_RC5T583 is not set
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
# CONFIG_REGULATOR_DUMMY is not set
CONFIG_REGULATOR_FIXED_VOLTAGE=m
CONFIG_REGULATOR_VIRTUAL_CONSUMER=m
CONFIG_REGULATOR_USERSPACE_CONSUMER=m
CONFIG_REGULATOR_AD5398=m
CONFIG_REGULATOR_ISL6271A=m
CONFIG_REGULATOR_MAX1586=m
CONFIG_REGULATOR_MAX8649=m
CONFIG_REGULATOR_MAX8660=m
CONFIG_REGULATOR_MAX8952=m
CONFIG_REGULATOR_LP3971=m
CONFIG_REGULATOR_LP3972=m
CONFIG_REGULATOR_TPS62360=m
CONFIG_REGULATOR_TPS65023=m
CONFIG_REGULATOR_TPS6507X=m
CONFIG_REGULATOR_TPS65217=m
CONFIG_MEDIA_SUPPORT=y
#
# Multimedia core support
#
CONFIG_MEDIA_CONTROLLER=y
CONFIG_VIDEO_DEV=y
CONFIG_VIDEO_V4L2_COMMON=y
CONFIG_VIDEO_V4L2_SUBDEV_API=y
# CONFIG_DVB_CORE is not set
CONFIG_VIDEO_MEDIA=y
#
# Multimedia drivers
#
# CONFIG_RC_CORE is not set
# CONFIG_MEDIA_ATTACH is not set
CONFIG_MEDIA_TUNER=y
# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
CONFIG_MEDIA_TUNER_SIMPLE=y
CONFIG_MEDIA_TUNER_TDA8290=y
CONFIG_MEDIA_TUNER_TDA827X=y
CONFIG_MEDIA_TUNER_TDA18271=y
CONFIG_MEDIA_TUNER_TDA9887=y
CONFIG_MEDIA_TUNER_TEA5761=y
CONFIG_MEDIA_TUNER_TEA5767=y
CONFIG_MEDIA_TUNER_MT20XX=y
CONFIG_MEDIA_TUNER_XC2028=y
CONFIG_MEDIA_TUNER_XC5000=y
CONFIG_MEDIA_TUNER_XC4000=y
CONFIG_MEDIA_TUNER_MC44S803=y
CONFIG_VIDEO_V4L2=y
CONFIG_VIDEOBUF2_CORE=y
CONFIG_VIDEOBUF2_MEMOPS=y
CONFIG_VIDEOBUF2_VMALLOC=y
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
#
# Audio decoders, processors and mixers
#
#
# RDS decoders
#
#
# Video decoders
#
#
# Video and audio decoders
#
#
# MPEG video encoders
#
#
# Video encoders
#
#
# Camera sensor devices
#
#
# Flash devices
#
#
# Video improvement chips
#
#
# Miscelaneous helper chips
#
# CONFIG_VIDEO_VIVI is not set
CONFIG_V4L_USB_DRIVERS=y
CONFIG_USB_VIDEO_CLASS=y
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
CONFIG_USB_GSPCA=y
# CONFIG_USB_M5602 is not set
# CONFIG_USB_STV06XX is not set
# CONFIG_USB_GL860 is not set
# CONFIG_USB_GSPCA_BENQ is not set
# CONFIG_USB_GSPCA_CONEX is not set
# CONFIG_USB_GSPCA_CPIA1 is not set
# CONFIG_USB_GSPCA_ETOMS is not set
# CONFIG_USB_GSPCA_FINEPIX is not set
# CONFIG_USB_GSPCA_JEILINJ is not set
# CONFIG_USB_GSPCA_JL2005BCD is not set
# CONFIG_USB_GSPCA_KINECT is not set
# CONFIG_USB_GSPCA_KONICA is not set
# CONFIG_USB_GSPCA_MARS is not set
# CONFIG_USB_GSPCA_MR97310A is not set
# CONFIG_USB_GSPCA_NW80X is not set
# CONFIG_USB_GSPCA_OV519 is not set
# CONFIG_USB_GSPCA_OV534 is not set
# CONFIG_USB_GSPCA_OV534_9 is not set
# CONFIG_USB_GSPCA_PAC207 is not set
# CONFIG_USB_GSPCA_PAC7302 is not set
# CONFIG_USB_GSPCA_PAC7311 is not set
# CONFIG_USB_GSPCA_SE401 is not set
# CONFIG_USB_GSPCA_SN9C2028 is not set
# CONFIG_USB_GSPCA_SN9C20X is not set
# CONFIG_USB_GSPCA_SONIXB is not set
# CONFIG_USB_GSPCA_SONIXJ is not set
# CONFIG_USB_GSPCA_SPCA500 is not set
# CONFIG_USB_GSPCA_SPCA501 is not set
# CONFIG_USB_GSPCA_SPCA505 is not set
# CONFIG_USB_GSPCA_SPCA506 is not set
# CONFIG_USB_GSPCA_SPCA508 is not set
# CONFIG_USB_GSPCA_SPCA561 is not set
# CONFIG_USB_GSPCA_SPCA1528 is not set
# CONFIG_USB_GSPCA_SQ905 is not set
# CONFIG_USB_GSPCA_SQ905C is not set
# CONFIG_USB_GSPCA_SQ930X is not set
# CONFIG_USB_GSPCA_STK014 is not set
# CONFIG_USB_GSPCA_STV0680 is not set
# CONFIG_USB_GSPCA_SUNPLUS is not set
# CONFIG_USB_GSPCA_T613 is not set
# CONFIG_USB_GSPCA_TOPRO is not set
# CONFIG_USB_GSPCA_TV8532 is not set
# CONFIG_USB_GSPCA_VC032X is not set
# CONFIG_USB_GSPCA_VICAM is not set
# CONFIG_USB_GSPCA_XIRLINK_CIT is not set
# CONFIG_USB_GSPCA_ZC3XX is not set
# CONFIG_VIDEO_PVRUSB2 is not set
# CONFIG_VIDEO_HDPVR is not set
# CONFIG_VIDEO_EM28XX is not set
# CONFIG_VIDEO_USBVISION is not set
# CONFIG_USB_ET61X251 is not set
# CONFIG_USB_SN9C102 is not set
# CONFIG_USB_PWC is not set
# CONFIG_VIDEO_CPIA2 is not set
# CONFIG_USB_ZR364XX is not set
# CONFIG_USB_STKWEBCAM is not set
# CONFIG_USB_S2255 is not set
CONFIG_V4L_PCI_DRIVERS=y
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_V4L_ISA_PARPORT_DRIVERS is not set
# CONFIG_V4L_PLATFORM_DRIVERS is not set
# CONFIG_V4L_MEM2MEM_DRIVERS is not set
# CONFIG_RADIO_ADAPTERS is not set
#
# Graphics support
#
CONFIG_AGP=y
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=y
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=2
# CONFIG_VGA_SWITCHEROO is not set
CONFIG_DRM=y
CONFIG_DRM_KMS_HELPER=y
# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
CONFIG_DRM_TTM=m
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_NOUVEAU is not set
#
# I2C encoder or helper chips
#
# CONFIG_DRM_I2C_CH7006 is not set
# CONFIG_DRM_I2C_SIL164 is not set
# CONFIG_DRM_I810 is not set
CONFIG_DRM_I915=y
CONFIG_DRM_I915_KMS=y
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
CONFIG_DRM_VMWGFX=m
# CONFIG_DRM_GMA500 is not set
# CONFIG_DRM_UDL is not set
# CONFIG_STUB_POULSBO is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB_DDC is not set
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_WMT_GE_ROPS is not set
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
CONFIG_FB_VESA=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_TMIO is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_EXYNOS_VIDEO is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_PLATFORM=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
# CONFIG_BACKLIGHT_PROGEAR is not set
# CONFIG_BACKLIGHT_APPLE is not set
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LP855X is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=256
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_JACK=y
# CONFIG_SND_SEQUENCER is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_HRTIMER=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_SUPPORT_OLD_API=y
# CONFIG_SND_VERBOSE_PROCFS is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_KCTL_JACK=y
CONFIG_SND_DMA_SGBUF=y
# CONFIG_SND_RAWMIDI_SEQ is not set
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
# CONFIG_SND_DRIVERS is not set
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ASIHPI is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=y
CONFIG_SND_HDA_PREALLOC_SIZE=64
# CONFIG_SND_HDA_HWDEP is not set
CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_INPUT_BEEP_MODE=1
CONFIG_SND_HDA_INPUT_JACK=y
# CONFIG_SND_HDA_PATCH_LOADER is not set
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_HDMI=y
CONFIG_SND_HDA_CODEC_CIRRUS=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CA0110=y
CONFIG_SND_HDA_CODEC_CA0132=y
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
# CONFIG_SND_HDA_POWER_SAVE is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_LOLA is not set
# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_USB is not set
# CONFIG_SND_FIREWIRE is not set
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_HIDRAW=y
#
# USB Input Devices
#
CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
CONFIG_USB_HIDDEV=y
#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
# CONFIG_HID_ACRUX is not set
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
# CONFIG_HID_PRODIKEYS is not set
CONFIG_HID_CYPRESS=y
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELECOM is not set
CONFIG_HID_EZKEY=y
# CONFIG_HID_HOLTEK is not set
# CONFIG_HID_KEYTOUCH is not set
CONFIG_HID_KYE=y
# CONFIG_HID_UCLOGIC is not set
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_TWINHAN is not set
CONFIG_HID_KENSINGTON=y
# CONFIG_HID_LCPOWER is not set
CONFIG_HID_LOGITECH=y
# CONFIG_HID_LOGITECH_DJ is not set
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_LOGIG940_FF is not set
# CONFIG_LOGIWHEELS_FF is not set
# CONFIG_HID_MAGICMOUSE is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
# CONFIG_HID_MULTITOUCH is not set
# CONFIG_HID_NTRIG is not set
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_ROCCAT is not set
# CONFIG_HID_SAITEK is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SONY is not set
# CONFIG_HID_SPEEDLINK is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TIVO is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_WACOM is not set
# CONFIG_HID_WIIMOTE is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB_ARCH_HAS_XHCI=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
CONFIG_USB_MON=m
CONFIG_USB_WUSB=m
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_C67X00_HCD=m
CONFIG_USB_XHCI_HCD=y
# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_OXU210HP_HCD=m
CONFIG_USB_ISP116X_HCD=m
CONFIG_USB_ISP1760_HCD=m
CONFIG_USB_ISP1362_HCD=m
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_HCD_PLATFORM is not set
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
CONFIG_USB_SL811_HCD=m
# CONFIG_USB_SL811_HCD_ISO is not set
CONFIG_USB_R8A66597_HCD=m
CONFIG_USB_WHCI_HCD=m
CONFIG_USB_HWA_HCD=m
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
CONFIG_USB_WDM=m
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_REALTEK is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
CONFIG_USB_STORAGE_FREECOM=m
CONFIG_USB_STORAGE_ISD200=m
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
CONFIG_USB_STORAGE_CYPRESS_ATACB=m
# CONFIG_USB_STORAGE_ENE_UB6250 is not set
CONFIG_USB_UAS=y
# CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
CONFIG_USB_SERIAL=m
# CONFIG_USB_EZUSB is not set
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP210X is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_FUNSOFT is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_F81232 is not set
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_METRO is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_MOTOROLA is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
CONFIG_USB_SERIAL_PL2303=m
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_QCAUX is not set
# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
CONFIG_USB_SERIAL_WWAN=m
CONFIG_USB_SERIAL_OPTION=m
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
# CONFIG_USB_SERIAL_ZIO is not set
# CONFIG_USB_SERIAL_SSU100 is not set
# CONFIG_USB_SERIAL_DEBUG is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
CONFIG_USB_CYPRESS_CY7C63=m
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
# CONFIG_USB_GADGET is not set
#
# OTG and related infrastructure
#
# CONFIG_NOP_USB_XCEIV is not set
CONFIG_UWB=m
CONFIG_UWB_HWA=m
CONFIG_UWB_WHCI=m
CONFIG_UWB_I1480U=m
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
# CONFIG_MMC_CLKGATE is not set
#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=y
# CONFIG_MMC_TEST is not set
#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PCI=y
CONFIG_MMC_RICOH_MMC=y
CONFIG_MMC_SDHCI_PLTFM=m
CONFIG_MMC_WBSD=m
CONFIG_MMC_TIFM_SD=m
CONFIG_MMC_CB710=m
CONFIG_MMC_VIA_SDMMC=m
CONFIG_MMC_VUB300=m
CONFIG_MMC_USHC=m
CONFIG_MEMSTICK=m
# CONFIG_MEMSTICK_DEBUG is not set
#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
CONFIG_MSPRO_BLOCK=m
#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=m
CONFIG_MEMSTICK_JMICRON_38X=m
CONFIG_MEMSTICK_R592=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_LP5523 is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA9633 is not set
# CONFIG_LEDS_REGULATOR is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_INTEL_SS4200 is not set
# CONFIG_LEDS_DELL_NETBOOKS is not set
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_OT200 is not set
CONFIG_LEDS_TRIGGERS=y
#
# LED Triggers
#
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC=y
#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=m
# CONFIG_EDAC_E752X is not set
# CONFIG_EDAC_I82975X is not set
# CONFIG_EDAC_I3000 is not set
# CONFIG_EDAC_I3200 is not set
# CONFIG_EDAC_X38 is not set
# CONFIG_EDAC_I5400 is not set
# CONFIG_EDAC_I7CORE is not set
# CONFIG_EDAC_I5000 is not set
# CONFIG_EDAC_I5100 is not set
# CONFIG_EDAC_I7300 is not set
CONFIG_EDAC_SBRIDGE=m
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
CONFIG_RTC_DRV_DS1307=m
CONFIG_RTC_DRV_DS1374=m
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_DS3232=m
CONFIG_RTC_DRV_MAX6900=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_ISL12022=m
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=m
CONFIG_RTC_DRV_M41T80=m
CONFIG_RTC_DRV_M41T80_WDT=y
CONFIG_RTC_DRV_BQ32K=m
CONFIG_RTC_DRV_S35390A=m
CONFIG_RTC_DRV_FM3130=m
CONFIG_RTC_DRV_RX8581=m
CONFIG_RTC_DRV_RX8025=m
CONFIG_RTC_DRV_EM3027=m
CONFIG_RTC_DRV_RV3029C2=m
#
# SPI RTC drivers
#
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
CONFIG_RTC_DRV_DS1286=m
CONFIG_RTC_DRV_DS1511=m
CONFIG_RTC_DRV_DS1553=m
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_STK17TA8=m
CONFIG_RTC_DRV_M48T86=m
CONFIG_RTC_DRV_M48T35=m
CONFIG_RTC_DRV_M48T59=m
CONFIG_RTC_DRV_MSM6242=m
CONFIG_RTC_DRV_BQ4802=m
CONFIG_RTC_DRV_RP5C01=m
CONFIG_RTC_DRV_V3020=m
#
# on-CPU RTC drivers
#
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set
#
# DMA Devices
#
# CONFIG_INTEL_MID_DMAC is not set
# CONFIG_INTEL_IOATDMA is not set
# CONFIG_TIMB_DMA is not set
# CONFIG_PCH_DMA is not set
CONFIG_DMA_ENGINE=y
#
# DMA Clients
#
# CONFIG_NET_DMA is not set
# CONFIG_ASYNC_TX_DMA is not set
# CONFIG_DMATEST is not set
# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=y
# CONFIG_UIO_CIF is not set
# CONFIG_UIO_PDRV is not set
# CONFIG_UIO_PDRV_GENIRQ is not set
# CONFIG_UIO_AEC is not set
# CONFIG_UIO_SERCOS3 is not set
CONFIG_UIO_PCI_GENERIC=m
# CONFIG_UIO_NETX is not set
CONFIG_VIRTIO=m
CONFIG_VIRTIO_RING=m
#
# Virtio drivers
#
CONFIG_VIRTIO_PCI=m
CONFIG_VIRTIO_BALLOON=m
CONFIG_VIRTIO_MMIO=m
#
# Microsoft Hyper-V guest support
#
# CONFIG_HYPERV is not set
CONFIG_STAGING=y
# CONFIG_ET131X is not set
# CONFIG_SLICOSS is not set
# CONFIG_USBIP_CORE is not set
# CONFIG_W35UND is not set
# CONFIG_PRISM2_USB is not set
# CONFIG_ECHO is not set
# CONFIG_COMEDI is not set
# CONFIG_ASUS_OLED is not set
# CONFIG_PANEL is not set
# CONFIG_R8187SE is not set
# CONFIG_RTL8192U is not set
# CONFIG_RTLLIB is not set
# CONFIG_R8712U is not set
# CONFIG_RTS_PSTOR is not set
# CONFIG_RTS5139 is not set
# CONFIG_TRANZPORT is not set
# CONFIG_IDE_PHISON is not set
# CONFIG_LINE6_USB is not set
# CONFIG_USB_SERIAL_QUATECH2 is not set
# CONFIG_USB_SERIAL_QUATECH_USB2 is not set
# CONFIG_VT6655 is not set
# CONFIG_VT6656 is not set
# CONFIG_VME_BUS is not set
# CONFIG_DX_SEP is not set
# CONFIG_IIO is not set
# CONFIG_ZRAM is not set
# CONFIG_ZCACHE is not set
# CONFIG_ZSMALLOC is not set
# CONFIG_FB_SM7XX is not set
# CONFIG_CRYSTALHD is not set
# CONFIG_FB_XGI is not set
# CONFIG_ACPI_QUICKSTART is not set
# CONFIG_USB_ENESTORAGE is not set
# CONFIG_BCM_WIMAX is not set
# CONFIG_FT1000 is not set
#
# Speakup console speech
#
# CONFIG_SPEAKUP is not set
# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set
CONFIG_INTEL_MEI=y
# CONFIG_STAGING_MEDIA is not set
#
# Android
#
# CONFIG_ANDROID is not set
# CONFIG_PHONE is not set
# CONFIG_RAMSTER is not set
# CONFIG_USB_WPAN_HCD is not set
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACER_WMI is not set
# CONFIG_ACERHDF is not set
# CONFIG_ASUS_LAPTOP is not set
CONFIG_DELL_LAPTOP=y
CONFIG_DELL_WMI=y
# CONFIG_DELL_WMI_AIO is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_FUJITSU_TABLET is not set
# CONFIG_AMILO_RFKILL is not set
# CONFIG_HP_ACCEL is not set
# CONFIG_HP_WMI is not set
# CONFIG_MSI_LAPTOP is not set
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_COMPAL_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_IDEAPAD_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_INTEL_MENLOW is not set
# CONFIG_EEEPC_LAPTOP is not set
# CONFIG_ASUS_WMI is not set
CONFIG_ACPI_WMI=y
# CONFIG_MSI_WMI is not set
# CONFIG_TOPSTAR_LAPTOP is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_TOSHIBA_BT_RFKILL is not set
# CONFIG_ACPI_CMPC is not set
CONFIG_INTEL_IPS=y
# CONFIG_IBM_RTL is not set
# CONFIG_XO15_EBOOK is not set
# CONFIG_SAMSUNG_LAPTOP is not set
# CONFIG_MXM_WMI is not set
CONFIG_INTEL_OAKTRAIL=y
# CONFIG_SAMSUNG_Q10 is not set
# CONFIG_APPLE_GMUX is not set
#
# Hardware Spinlock drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y
# CONFIG_AMD_IOMMU is not set
CONFIG_DMAR_TABLE=y
CONFIG_INTEL_IOMMU=y
CONFIG_INTEL_IOMMU_DEFAULT_ON=y
CONFIG_INTEL_IOMMU_FLOPPY_WA=y
CONFIG_IRQ_REMAP=y
#
# Remoteproc drivers (EXPERIMENTAL)
#
#
# Rpmsg drivers (EXPERIMENTAL)
#
CONFIG_VIRT_DRIVERS=y
CONFIG_PM_DEVFREQ=y
#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
CONFIG_DEVFREQ_GOV_PERFORMANCE=y
CONFIG_DEVFREQ_GOV_POWERSAVE=y
CONFIG_DEVFREQ_GOV_USERSPACE=y
#
# DEVFREQ Drivers
#
#
# Firmware Drivers
#
CONFIG_EDD=y
# CONFIG_EDD_OFF is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_DELL_RBU=y
CONFIG_DCDBAS=y
CONFIG_DMIID=y
CONFIG_DMI_SYSFS=y
# CONFIG_ISCSI_IBFT_FIND is not set
# CONFIG_GOOGLE_FIRMWARE is not set
#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_EXT2_FS=m
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_EXT4_FS=m
# CONFIG_EXT4_FS_XATTR is not set
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=m
# CONFIG_JBD2_DEBUG is not set
# CONFIG_REISERFS_FS is not set
CONFIG_JFS_FS=m
# CONFIG_JFS_POSIX_ACL is not set
# CONFIG_JFS_SECURITY is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
# CONFIG_QUOTA is not set
# CONFIG_QUOTACTL is not set
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=m
# CONFIG_CUSE is not set
#
# Caches
#
CONFIG_FSCACHE=m
# CONFIG_FSCACHE_STATS is not set
# CONFIG_FSCACHE_HISTOGRAM is not set
# CONFIG_FSCACHE_DEBUG is not set
# CONFIG_FSCACHE_OBJECT_LIST is not set
CONFIG_CACHEFILES=m
# CONFIG_CACHEFILES_DEBUG is not set
# CONFIG_CACHEFILES_HISTOGRAM is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_TMPFS_XATTR is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=y
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
CONFIG_ECRYPT_FS=m
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
CONFIG_SQUASHFS=m
# CONFIG_SQUASHFS_XATTR is not set
CONFIG_SQUASHFS_ZLIB=y
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
CONFIG_SQUASHFS_4K_DEVBLK_SIZE=y
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_PSTORE=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_V4_1 is not set
# CONFIG_NFS_FSCACHE is not set
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
# CONFIG_NFSD_FAULT_INJECTION is not set
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_SUNRPC_DEBUG is not set
# CONFIG_CEPH_FS is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
CONFIG_CIFS_WEAK_PW_HASH=y
# CONFIG_CIFS_UPCALL is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_DFS_UPCALL is not set
# CONFIG_CIFS_FSCACHE is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_852=y
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
CONFIG_NLS_CODEPAGE_1250=y
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=y
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
CONFIG_DLM=y
# CONFIG_DLM_DEBUG is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
CONFIG_LOCKUP_DETECTOR=y
CONFIG_HARDLOCKUP_DETECTOR=y
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC=y
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=1
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_SPARSE_RCU_POINTER is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_INFO_REDUCED is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=60
# CONFIG_RCU_CPU_STALL_INFO is not set
# CONFIG_RCU_TRACE is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_LKDTM is not set
# CONFIG_CPU_NOTIFIER_ERROR_INJECT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_ASYNC_RAID6_TEST is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_STRICT_DEVMEM is not set
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_X86_PTDUMP is not set
# CONFIG_DEBUG_RODATA is not set
# CONFIG_DEBUG_SET_MODULE_RONX is not set
# CONFIG_DEBUG_NX_TEST is not set
# CONFIG_IOMMU_DEBUG is not set
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y
# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
# CONFIG_DEBUG_NMI_SELFTEST is not set
#
# Security options
#
CONFIG_KEYS=y
# CONFIG_TRUSTED_KEYS is not set
# CONFIG_ENCRYPTED_KEYS is not set
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
# CONFIG_SECURITY is not set
CONFIG_SECURITYFS=y
CONFIG_INTEL_TXT=y
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=y
CONFIG_ASYNC_MEMCPY=y
CONFIG_ASYNC_XOR=y
CONFIG_ASYNC_PQ=y
CONFIG_ASYNC_RAID6_RECOV=y
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_PCRYPT=y
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_SEQIV=y
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_XTS=y
#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
CONFIG_CRYPTO_VMAC=y
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=y
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_RMD128=y
CONFIG_CRYPTO_RMD160=y
CONFIG_CRYPTO_RMD256=y
CONFIG_CRYPTO_RMD320=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA1_SSSE3=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_TGR192=y
CONFIG_CRYPTO_WP512=y
CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=y
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_X86_64=y
CONFIG_CRYPTO_AES_NI_INTEL=y
CONFIG_CRYPTO_ANUBIS=y
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_BLOWFISH_COMMON=y
CONFIG_CRYPTO_BLOWFISH_X86_64=y
CONFIG_CRYPTO_CAMELLIA=y
CONFIG_CRYPTO_CAMELLIA_X86_64=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=y
CONFIG_CRYPTO_KHAZAD=y
CONFIG_CRYPTO_SALSA20=y
CONFIG_CRYPTO_SALSA20_X86_64=y
CONFIG_CRYPTO_SEED=y
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_SERPENT_SSE2_X86_64=y
CONFIG_CRYPTO_TEA=y
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
CONFIG_CRYPTO_TWOFISH_X86_64=y
CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=y
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_ZLIB=y
CONFIG_CRYPTO_LZO=y
#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=y
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRYPTO_USER_API_SKCIPHER=y
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_PADLOCK is not set
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_APIC_ARCHITECTURE=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=y
CONFIG_KVM_INTEL=y
# CONFIG_KVM_AMD is not set
CONFIG_VHOST_NET=y
# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_RAID6_PQ=y
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
# CONFIG_CRC8 is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_NLATTR=y
CONFIG_AVERAGE=y
# CONFIG_CORDIC is not set
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: 3.2.11: PCI Express card cannot be re-detected withing cca 60sec timeframe
2012-04-18 20:29 ` Martin Mokrejs
@ 2012-04-18 20:58 ` Yinghai Lu
2012-04-18 22:55 ` Martin Mokrejs
2012-04-19 23:16 ` Martin Mokrejs
0 siblings, 2 replies; 55+ messages in thread
From: Yinghai Lu @ 2012-04-18 20:58 UTC (permalink / raw)
To: Martin Mokrejs; +Cc: linux-pci, Linux Kernel Mailing List
On Wed, Apr 18, 2012 at 1:29 PM, Martin Mokrejs
<mmokrejs@fold.natur.cuni.cz> wrote:
> Yinghai Lu wrote:
>> On Wed, Apr 18, 2012 at 10:53 AM, Martin Mokrejs
>> <mmokrejs@fold.natur.cuni.cz> wrote:
>>>> After you remove USB3 expresscard, you need to
>>>>
>>>> echo 1 > /sys/devices/pci0000\:00/0000\:00\:1c.7/pcie_link_disable
>>>> then
>>>> echo 0 > /sys/devices/pci0000\:00/0000\:00\:1c.7/pcie_link_disable
>>>
>>> So without these two echo commands the is no improvement/fix.
>>>
>>> [ 686.701306] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 8
>>> [ 686.701316] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
>>> [ 686.701319] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
>>> [ 686.701357] pciehp 0000:00:1c.7:pcie04: Surprise Removal
>>> [ 686.701390] pciehp 0000:00:1c.7:pcie04: check_link_active: lnk_status = 7011
>>> [ 686.809763] pciehp 0000:00:1c.7:pcie04: pciehp_check_link_status: lnk_status = 7011
>> ...
>>> [ 686.833678] hub 6-0:1.0: 2 ports detected
>>>
>>> echo 1 > /sys/devices/pci0000\:00/0000\:00\:1c.7/pcie_link_disable
>>>
>>> [ 716.999938] pcieport 0000:00:1c.7: pcie_link_disable_set: lnk_ctrl = 53
>>> [ 717.024647] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 8
>>> [ 717.024657] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
>>> [ 717.024665] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
>>> [ 717.024723] pciehp 0000:00:1c.7:pcie04: Surprise Removal
>>> [ 717.024753] pciehp 0000:00:1c.7:pcie04: Disabling domain:bus:device=0000:11:00
>>> [ 717.024756] pciehp 0000:00:1c.7:pcie04: pciehp_unconfigure_device: domain:bus:dev = 0000:11:00
>> ..
>>> [ 717.045197] pci 0000:11:00.0: freeing pci_dev info
>>>
>>> echo 0 > /sys/devices/pci0000\:00/0000\:00\:1c.7/pcie_link_disable
>>>
>>> [ 748.456914] pcieport 0000:00:1c.7: pcie_link_disable_set: lnk_ctrl = 40
>>>
>>
>> so it is chipset problem, it does not detect and report the presence
>> of the card after that link is removed.
>
> Why doesn't this happen with the FireWire express card?
sometimes it report correctly. sometime it does not.
>
>>
>> Can you try to use acpiphp instead of pciehp?
>
> Umm. I do have acpiphp in my kernel already. I am rather attaching my .config,
> please me know what you want me to do. My kernel command line could be seen
> in my previous posts in the dmesg file.
remove
CONFIG_HOTPLUG_PCI_PCIE=y
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: 3.2.11: PCI Express card cannot be re-detected withing cca 60sec timeframe
2012-04-18 20:58 ` Yinghai Lu
@ 2012-04-18 22:55 ` Martin Mokrejs
2012-04-19 1:57 ` Yinghai Lu
2012-04-19 23:16 ` Martin Mokrejs
1 sibling, 1 reply; 55+ messages in thread
From: Martin Mokrejs @ 2012-04-18 22:55 UTC (permalink / raw)
To: Yinghai Lu; +Cc: linux-pci, Linux Kernel Mailing List
[-- Attachment #1: Type: text/plain, Size: 3596 bytes --]
Yinghai Lu wrote:
> On Wed, Apr 18, 2012 at 1:29 PM, Martin Mokrejs
> <mmokrejs@fold.natur.cuni.cz> wrote:
>> Yinghai Lu wrote:
>>> On Wed, Apr 18, 2012 at 10:53 AM, Martin Mokrejs
>>> <mmokrejs@fold.natur.cuni.cz> wrote:
>>>>> After you remove USB3 expresscard, you need to
>>>>>
>>>>> echo 1 > /sys/devices/pci0000\:00/0000\:00\:1c.7/pcie_link_disable
>>>>> then
>>>>> echo 0 > /sys/devices/pci0000\:00/0000\:00\:1c.7/pcie_link_disable
>>>>
>>>> So without these two echo commands the is no improvement/fix.
>>>>
>>>> [ 686.701306] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 8
>>>> [ 686.701316] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
>>>> [ 686.701319] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
>>>> [ 686.701357] pciehp 0000:00:1c.7:pcie04: Surprise Removal
>>>> [ 686.701390] pciehp 0000:00:1c.7:pcie04: check_link_active: lnk_status = 7011
>>>> [ 686.809763] pciehp 0000:00:1c.7:pcie04: pciehp_check_link_status: lnk_status = 7011
>>> ...
>>>> [ 686.833678] hub 6-0:1.0: 2 ports detected
>>>>
>>>> echo 1 > /sys/devices/pci0000\:00/0000\:00\:1c.7/pcie_link_disable
>>>>
>>>> [ 716.999938] pcieport 0000:00:1c.7: pcie_link_disable_set: lnk_ctrl = 53
>>>> [ 717.024647] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 8
>>>> [ 717.024657] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
>>>> [ 717.024665] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
>>>> [ 717.024723] pciehp 0000:00:1c.7:pcie04: Surprise Removal
>>>> [ 717.024753] pciehp 0000:00:1c.7:pcie04: Disabling domain:bus:device=0000:11:00
>>>> [ 717.024756] pciehp 0000:00:1c.7:pcie04: pciehp_unconfigure_device: domain:bus:dev = 0000:11:00
>>> ..
>>>> [ 717.045197] pci 0000:11:00.0: freeing pci_dev info
>>>>
>>>> echo 0 > /sys/devices/pci0000\:00/0000\:00\:1c.7/pcie_link_disable
>>>>
>>>> [ 748.456914] pcieport 0000:00:1c.7: pcie_link_disable_set: lnk_ctrl = 40
>>>>
>>>
>>> so it is chipset problem, it does not detect and report the presence
>>> of the card after that link is removed.
>>
>> Why doesn't this happen with the FireWire express card?
>
> sometimes it report correctly. sometime it does not.
>
>>
>>>
>>> Can you try to use acpiphp instead of pciehp?
>>
>> Umm. I do have acpiphp in my kernel already. I am rather attaching my .config,
>> please me know what you want me to do. My kernel command line could be seen
>> in my previous posts in the dmesg file.
>
> remove
>
> CONFIG_HOTPLUG_PCI_PCIE=y
The express card slot seems "dead", nothing happens when I plugin the card.
I have attached the lspci of the bridge (when card p[lugged in), in case there is
something of interest to you. ;-) Same for dmesg.
# grep HOTPLUG /usr/src/linux-3.4-rc3__patches_yinghai_jeff_garzik/.config
CONFIG_HOTPLUG=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_HOTPLUG_CPU=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ACPI_HOTPLUG_CPU=y
# CONFIG_HOTPLUG_PCI_PCIE is not set
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_FAKE is not set
CONFIG_HOTPLUG_PCI_ACPI=y
# CONFIG_HOTPLUG_PCI_ACPI_IBM is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
CONFIG_HOTPLUG_PCI_SHPC=m
#
The echo commands just do:
[ 616.477711] pcieport 0000:00:1c.7: pcie_link_disable_set: lnk_ctrl = 53
[ 637.242990] pcieport 0000:00:1c.7: pcie_link_disable_set: lnk_ctrl = 43
[ 641.791748] pcieport 0000:00:1c.7: pcie_link_disable_set: lnk_ctrl = 52
[ 654.317009] pcieport 0000:00:1c.7: pcie_link_disable_set: lnk_ctrl = 42
[ 664.238154] pcieport 0000:00:1c.7: pcie_link_disable_set: lnk_ctrl = 52
[ 686.101576] pcieport 0000:00:1c.7: pcie_link_disable_set: lnk_ctrl = 43
Martin
[-- Attachment #2: lspci-3.4-rc3-disabled-CONFIG_HOTPLUG_PCI_PCIE --]
[-- Type: text/plain, Size: 16465 bytes --]
00:1c.7 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=11, subordinate=16, sec-latency=0
I/O behind bridge: 0000c000-0000dfff
Memory behind bridge: f6c00000-f7cfffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f10fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #8, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #7, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee00318 Data: 0000
Capabilities: [90] Subsystem: Dell Device 04b3
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport
Kernel modules: shpchp
00: 86 80 1e 1c 07 04 10 00 b5 00 04 06 10 00 81 00
10: 00 00 00 00 00 00 00 00 00 11 16 00 c0 d0 00 20
20: c0 f6 c0 f7 01 f0 01 f1 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 04 10 00
40: 10 80 42 01 00 80 00 00 00 00 10 00 12 3c 12 08
50: 43 00 11 70 60 b2 3c 00 00 00 40 01 00 00 00 00
60: 00 00 00 00 16 00 00 00 00 00 00 00 00 00 00 00
70: 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 05 90 01 00 18 03 e0 fe 00 00 00 00 00 00 00 00
90: 0d a0 00 00 28 10 b3 04 00 00 00 00 00 00 00 00
a0: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 01 02 0b 00 00 02 80 11 c1 00 00 00 00
e0: 00 03 00 00 00 00 00 00 03 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 87 0f 06 08 00 00 00 00
100: 00 00 00 00 00 00 00 00 00 40 00 00 11 00 06 00
110: 00 00 00 00 00 20 00 00 00 00 00 00 00 00 00 00
120: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
130: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
140: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
150: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
160: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
170: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
190: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
210: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
220: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
230: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
240: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
250: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
260: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
270: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
280: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
290: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
300: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
310: 00 00 00 00 1b 36 3a 74 00 00 14 14 31 17 42 00
320: 5b 60 09 00 20 20 00 0a 60 10 c8 04 5f 00 5f 00
330: 16 00 00 28 bc b5 bc 4a 00 00 00 00 74 4c 85 00
340: 01 00 01 00 21 00 05 00 30 00 0c 00 04 00 5f 00
350: 08 00 63 00 01 00 08 00 00 00 00 00 00 00 00 00
360: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
370: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
380: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
390: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
3a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
3b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
3c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
3d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
3e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
3f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
410: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
420: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
430: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
440: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
450: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
460: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
470: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
480: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
490: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
4a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
4b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
4c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
4d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
4e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
4f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
510: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
520: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
530: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
540: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
550: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
560: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
570: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
580: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
590: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
5a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
5b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
5c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
5d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
5e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
5f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
600: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
610: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
620: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
630: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
640: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
650: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
660: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
670: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
680: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
690: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
6a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
6b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
6c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
6d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
6e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
6f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
700: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
710: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
720: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
730: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
740: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
750: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
760: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
770: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
780: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
790: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
7a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
7b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
7c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
7d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
7e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
7f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
810: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
820: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
830: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
840: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
850: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
860: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
870: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
880: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
890: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
8a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
8b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
8c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
8d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
8e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
8f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
900: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
910: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
920: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
930: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
940: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
950: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
960: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
970: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
980: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
990: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
9a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
9b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
9c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
9d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
9e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
9f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
aa0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ab0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ac0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ad0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ae0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
af0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ba0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
bb0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
bc0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
bd0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
be0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
bf0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ca0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
cb0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
cc0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
cd0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ce0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
cf0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
da0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
db0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
dc0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
dd0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
de0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
df0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ea0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
eb0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ec0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ed0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ee0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ef0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
fa0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
fb0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
fc0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
fd0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
fe0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ff0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[-- Attachment #3: dmesg-3.4-rc3-disabled-CONFIG_HOTPLUG_PCI_PCIE --]
[-- Type: text/plain, Size: 60880 bytes --]
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.4.0-rc3-default (root@vostro) (gcc version 4.5.3 (Gentoo 4.5.3-r2 p1.1, pie-0.4.7) ) #5 SMP Wed Apr 18 23:25:41 MEST 2012
[ 0.000000] Command line: root=/dev/sda5 pciehp.pciehp_debug=1
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d400 (usable)
[ 0.000000] BIOS-e820: 000000000009d400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
[ 0.000000] BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
[ 0.000000] BIOS-e820: 0000000020200000 - 0000000040000000 (usable)
[ 0.000000] BIOS-e820: 0000000040000000 - 0000000040200000 (reserved)
[ 0.000000] BIOS-e820: 0000000040200000 - 00000000da4e5000 (usable)
[ 0.000000] BIOS-e820: 00000000da4e5000 - 00000000da528000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000da528000 - 00000000da793000 (usable)
[ 0.000000] BIOS-e820: 00000000da793000 - 00000000da967000 (reserved)
[ 0.000000] BIOS-e820: 00000000da967000 - 00000000daa89000 (usable)
[ 0.000000] BIOS-e820: 00000000daa89000 - 00000000dad68000 (reserved)
[ 0.000000] BIOS-e820: 00000000dad68000 - 00000000dafe8000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000dafe8000 - 00000000db000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000db800000 - 00000000dfa00000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed04000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000041fe00000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.6 present.
[ 0.000000] DMI: Dell Inc. Vostro 3550/0JGC48, BIOS A09 09/30/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x41fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask C00000000 write-back
[ 0.000000] 1 base 400000000 mask FE0000000 write-back
[ 0.000000] 2 base 0DB800000 mask FFF800000 uncachable
[ 0.000000] 3 base 0DC000000 mask FFC000000 uncachable
[ 0.000000] 4 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 5 base 41FE00000 mask FFFE00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000db800000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xdaa89 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000daa89000
[ 0.000000] 0000000000 - 00daa00000 page 2M
[ 0.000000] 00daa00000 - 00daa89000 page 4k
[ 0.000000] kernel direct mapping tables up to daa89000 @ 1fffa000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-000000041fe00000
[ 0.000000] 0100000000 - 041fe00000 page 2M
[ 0.000000] kernel direct mapping tables up to 41fe00000 @ daa77000-daa89000
[ 0.000000] ACPI: RSDP 00000000000f0410 00024 (v02 DELL)
[ 0.000000] ACPI: XSDT 00000000dafe8078 00074 (v01 DELL WN09 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 00000000daff1d08 000F4 (v04 DELL WN09 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 00000000dafe8180 09B85 (v02 DELL WN09 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000dafe3f80 00040
[ 0.000000] ACPI: APIC 00000000daff1e00 00072 (v03 DELL WN09 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 00000000daff1e78 0003C (v01 DELL WN09 01072009 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000daff1eb8 004B0 (v01 TrmRef PtidDevc 00001000 INTL 20091112)
[ 0.000000] ACPI: SLIC 00000000daff2368 00176 (v01 DELL WN09 01072009 AMI 00010013)
[ 0.000000] ACPI: HPET 00000000daff24e0 00038 (v01 DELL WN09 01072009 AMI. 00000004)
[ 0.000000] ACPI: SSDT 00000000daff2518 00846 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 00000000daff2d60 00996 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: DMAR 00000000daff36f8 000E8 (v01 INTEL SNB 00000001 INTL 00000001)
[ 0.000000] ACPI: OSFR 00000000daff37e0 00086 (v01 DELL M08 07DB091E ASL 00000061)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000041fe00000
[ 0.000000] Initmem setup node 0 0000000000000000-000000041fe00000
[ 0.000000] NODE_DATA [000000041fdfc000 - 000000041fdfffff]
[ 0.000000] [ffffea0000000000-ffffea000e7fffff] PMD -> [ffff88040f400000-ffff88041d5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0041fe00
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x00020000
[ 0.000000] 0: 0x00020200 -> 0x00040000
[ 0.000000] 0: 0x00040200 -> 0x000da4e5
[ 0.000000] 0: 0x000da528 -> 0x000da793
[ 0.000000] 0: 0x000da967 -> 0x000daa89
[ 0.000000] 0: 0x00100000 -> 0x0041fe00
[ 0.000000] On node 0 totalpages: 4170239
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3920 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 875690 pages, LIFO batch:31
[ 0.000000] Normal zone: 44793 pages used for memmap
[ 0.000000] Normal zone: 3231495 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[ 0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000
[ 0.000000] PM: Registered nosave memory: 00000000da4e5000 - 00000000da528000
[ 0.000000] PM: Registered nosave memory: 00000000da793000 - 00000000da967000
[ 0.000000] PM: Registered nosave memory: 00000000daa89000 - 00000000dad68000
[ 0.000000] PM: Registered nosave memory: 00000000dad68000 - 00000000dafe8000
[ 0.000000] PM: Registered nosave memory: 00000000dafe8000 - 00000000db000000
[ 0.000000] PM: Registered nosave memory: 00000000db000000 - 00000000db800000
[ 0.000000] PM: Registered nosave memory: 00000000db800000 - 00000000dfa00000
[ 0.000000] PM: Registered nosave memory: 00000000dfa00000 - 00000000f8000000
[ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000
[ 0.000000] PM: Registered nosave memory: 00000000fed04000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at dfa00000 (gap: dfa00000:18600000)
[ 0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 25 pages/cpu @ffff88041fa00000 s72448 r8192 d21760 u524288
[ 0.000000] pcpu-alloc: s72448 r8192 d21760 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4111105
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/sda5 pciehp.pciehp_debug=1
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 16372148k/17299456k available (5708k kernel code, 618500k absent, 308808k reserved, 3602k data, 544k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:4352 nr_irqs:712 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.010000] Detected 2793.532 MHz processor.
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5587.06 BogoMIPS (lpj=27935320)
[ 0.000190] pid_max: default: 32768 minimum: 301
[ 0.001159] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.004169] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.005548] Mount-cache hash table entries: 256
[ 0.005809] CPU: Physical Processor ID: 0
[ 0.005902] CPU: Processor Core ID: 0
[ 0.005997] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.005998] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.006189] mce: CPU supports 7 MCE banks
[ 0.006290] CPU0: Thermal monitoring enabled (TM1)
[ 0.006388] using mwait in idle threads.
[ 0.006537] ACPI: Core revision 20120320
[ 0.023014] DMAR: Host address width 36
[ 0.023106] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.023205] IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ 0.023351] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.023448] IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.023593] DMAR: RMRR base: 0x000000dad53000 end: 0x000000dad61fff
[ 0.023688] DMAR: RMRR base: 0x000000db800000 end: 0x000000df9fffff
[ 0.023851] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.023946] HPET id 0 under DRHD base 0xfed91000
[ 0.024039] HPET id 0 under DRHD base 0xfed91000
[ 0.024131] HPET id 0 under DRHD base 0xfed91000
[ 0.024225] HPET id 0 under DRHD base 0xfed91000
[ 0.024318] HPET id 0 under DRHD base 0xfed91000
[ 0.024410] HPET id 0 under DRHD base 0xfed91000
[ 0.024504] HPET id 0 under DRHD base 0xfed91000
[ 0.024597] HPET id 0 under DRHD base 0xfed91000
[ 0.024851] Enabled IRQ remapping in x2apic mode
[ 0.024945] Enabling x2apic
[ 0.025036] Enabled x2apic
[ 0.025129] Switched APIC routing to cluster x2apic.
[ 0.025662] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.125609] CPU0: Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz stepping 07
[ 0.236485] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
[ 0.236788] PEBS disabled due to CPU errata.
[ 0.236882] ... version: 3
[ 0.236974] ... bit width: 48
[ 0.237067] ... generic registers: 4
[ 0.237158] ... value mask: 0000ffffffffffff
[ 0.237251] ... max period: 000000007fffffff
[ 0.237345] ... fixed-purpose events: 3
[ 0.237436] ... event mask: 000000070000000f
[ 0.238938] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.239108] Booting Node 0, Processors #1
[ 0.252308] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.252569] #2
[ 0.265725] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.265987] #3 Ok.
[ 0.279184] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.279304] Brought up 4 CPUs
[ 0.279396] Total of 4 processors activated (22348.25 BogoMIPS).
[ 0.282435] devtmpfs: initialized
[ 0.282703] PM: Registering ACPI NVS region [mem 0xda4e5000-0xda527fff] (274432 bytes)
[ 0.282857] PM: Registering ACPI NVS region [mem 0xdad68000-0xdafe7fff] (2621440 bytes)
[ 0.283121] xor: automatically using best checksumming function: generic_sse
[ 0.326349] generic_sse: 12452.000 MB/sec
[ 0.326442] xor: using function: generic_sse (12452.000 MB/sec)
[ 0.326669] dummy:
[ 0.326831] NET: Registered protocol family 16
[ 0.327244] ACPI: bus type pci registered
[ 0.327429] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.327577] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.334728] PCI: Using configuration type 1 for base access
[ 0.340717] bio: create slab <bio-0> at 0
[ 0.506081] raid6: int64x1 2921 MB/s
[ 0.675828] raid6: int64x2 3002 MB/s
[ 0.845582] raid6: int64x4 2722 MB/s
[ 1.015316] raid6: int64x8 1729 MB/s
[ 1.185060] raid6: sse2x1 7521 MB/s
[ 1.354799] raid6: sse2x2 9242 MB/s
[ 1.524540] raid6: sse2x4 10550 MB/s
[ 1.524633] raid6: using algorithm sse2x4 (10550 MB/s)
[ 1.524768] ACPI: Added _OSI(Module Device)
[ 1.524864] ACPI: Added _OSI(Processor Device)
[ 1.524959] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 1.525056] ACPI: Added _OSI(Processor Aggregator Device)
[ 1.526375] ACPI: EC: Look up EC in DSDT
[ 1.527703] ACPI: Executed 1 blocks of module-level executable AML code
[ 1.532633] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 1.537115] ACPI: SSDT 00000000dad51698 0064F (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 1.537655] ACPI: Dynamic OEM Table Load:
[ 1.537825] ACPI: SSDT (null) 0064F (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 1.538404] ACPI: SSDT 00000000dad52a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 1.538983] ACPI: Dynamic OEM Table Load:
[ 1.539153] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 1.539501] ACPI: SSDT 00000000dad50d98 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 1.540030] ACPI: Dynamic OEM Table Load:
[ 1.540199] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 1.540983] ACPI: Interpreter enabled
[ 1.541078] ACPI: (supports S0 S1 S3 S4 S5)
[ 1.541384] ACPI: Using IOAPIC for interrupt routing
[ 1.566747] ACPI: No dock devices found.
[ 1.566842] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 1.567356] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 1.567889] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 1.567987] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 1.568084] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 1.568225] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[ 1.568369] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 1.568513] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 1.568657] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
[ 1.568802] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
[ 1.568947] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
[ 1.569091] pci_root PNP0A08:00: host bridge window [mem 0xdfa00000-0xfeafffff]
[ 1.569236] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
[ 1.569427] PCI host bridge to bus 0000:00
[ 1.569521] pci_bus 0000:00: busn_res: [bus 00-3e] for root bus
[ 1.569522] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 1.569618] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 1.569714] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 1.569811] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 1.569909] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 1.570006] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 1.570103] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 1.570200] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 1.570297] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 1.570396] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 1.570493] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff]
[ 1.570590] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[ 1.570693] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[ 1.570727] pci 0000:00:02.0: [8086:0126] type 00 class 0x030000
[ 1.570736] pci 0000:00:02.0: reg 10: [mem 0xf6800000-0xf6bfffff 64bit]
[ 1.570741] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 1.570745] pci 0000:00:02.0: reg 20: [io 0xf000-0xf03f]
[ 1.570795] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 1.570818] pci 0000:00:16.0: reg 10: [mem 0xf7f0a000-0xf7f0a00f 64bit]
[ 1.570892] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 1.570926] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 1.570946] pci 0000:00:1a.0: reg 10: [mem 0xf7f08000-0xf7f083ff]
[ 1.571034] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 1.571060] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 1.571075] pci 0000:00:1b.0: reg 10: [mem 0xf7f00000-0xf7f03fff 64bit]
[ 1.571141] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.571166] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 1.571242] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.571269] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[ 1.571345] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 1.571371] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[ 1.571448] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 1.571478] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[ 1.571608] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 1.571649] pci 0000:00:1c.7: [8086:1c1e] type 01 class 0x060400
[ 1.571780] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[ 1.571820] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 1.571840] pci 0000:00:1d.0: reg 10: [mem 0xf7f07000-0xf7f073ff]
[ 1.571928] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 1.571954] pci 0000:00:1f.0: [8086:1c4b] type 00 class 0x060100
[ 1.572075] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[ 1.572093] pci 0000:00:1f.2: reg 10: [io 0xf0b0-0xf0b7]
[ 1.572101] pci 0000:00:1f.2: reg 14: [io 0xf0a0-0xf0a3]
[ 1.572109] pci 0000:00:1f.2: reg 18: [io 0xf090-0xf097]
[ 1.572117] pci 0000:00:1f.2: reg 1c: [io 0xf080-0xf083]
[ 1.572124] pci 0000:00:1f.2: reg 20: [io 0xf060-0xf07f]
[ 1.572132] pci 0000:00:1f.2: reg 24: [mem 0xf7f06000-0xf7f067ff]
[ 1.572176] pci 0000:00:1f.2: PME# supported from D3hot
[ 1.572194] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 1.572210] pci 0000:00:1f.3: reg 10: [mem 0xf7f05000-0xf7f050ff 64bit]
[ 1.572230] pci 0000:00:1f.3: reg 20: [io 0xf040-0xf05f]
[ 1.572260] pci 0000:00:1c.0: check if busn 03-04 is in busn_res: [bus 00-3e]
[ 1.572306] pci_bus 0000:03: busn_res: [bus 03-04] is inserted under [bus 00-3e]
[ 1.572310] pci 0000:00:1c.0: PCI bridge to [bus 03-04]
[ 1.572416] pci 0000:00:1c.1: check if busn 05-06 is in busn_res: [bus 00-3e]
[ 1.572460] pci_bus 0000:05: busn_res: [bus 05-06] is inserted under [bus 00-3e]
[ 1.572486] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
[ 1.572506] pci 0000:05:00.0: reg 10: [io 0xe000-0xe0ff]
[ 1.572540] pci 0000:05:00.0: reg 18: [mem 0xf1104000-0xf1104fff 64bit pref]
[ 1.572562] pci 0000:05:00.0: reg 20: [mem 0xf1100000-0xf1103fff 64bit pref]
[ 1.572653] pci 0000:05:00.0: supports D1 D2
[ 1.572655] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.590308] pci 0000:00:1c.1: PCI bridge to [bus 05-06]
[ 1.590448] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
[ 1.590456] pci 0000:00:1c.1: bridge window [mem 0xf1100000-0xf11fffff 64bit pref]
[ 1.590461] pci 0000:00:1c.3: check if busn 09-0a is in busn_res: [bus 00-3e]
[ 1.590504] pci_bus 0000:09: busn_res: [bus 09-0a] is inserted under [bus 00-3e]
[ 1.590668] pci 0000:09:00.0: [8086:008a] type 00 class 0x028000
[ 1.590815] pci 0000:09:00.0: reg 10: [mem 0xf7e00000-0xf7e01fff 64bit]
[ 1.591439] pci 0000:09:00.0: PME# supported from D0 D3hot D3cold
[ 1.610393] pci 0000:00:1c.3: PCI bridge to [bus 09-0a]
[ 1.610491] pci 0000:00:1c.3: bridge window [mem 0xf7e00000-0xf7efffff]
[ 1.610501] pci 0000:00:1c.4: check if busn 0b-0c is in busn_res: [bus 00-3e]
[ 1.610569] pci_bus 0000:0b: busn_res: [bus 0b-0c] is inserted under [bus 00-3e]
[ 1.610597] pci 0000:0b:00.0: [104c:8241] type 00 class 0x0c0330
[ 1.610622] pci 0000:0b:00.0: reg 10: [mem 0xf7d00000-0xf7d0ffff 64bit]
[ 1.610642] pci 0000:0b:00.0: reg 18: [mem 0xf7d10000-0xf7d11fff 64bit]
[ 1.610746] pci 0000:0b:00.0: supports D1 D2
[ 1.610748] pci 0000:0b:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.630245] pci 0000:00:1c.4: PCI bridge to [bus 0b-0c]
[ 1.630387] pci 0000:00:1c.4: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 1.630400] pci 0000:00:1c.7: check if busn 11-16 is in busn_res: [bus 00-3e]
[ 1.630467] pci_bus 0000:11: busn_res: [bus 11-16] is inserted under [bus 00-3e]
[ 1.630471] pci 0000:00:1c.7: PCI bridge to [bus 11-16]
[ 1.630569] pci 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
[ 1.630573] pci 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff]
[ 1.630581] pci 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
[ 1.630632] pci 0000:00:1c.0: PCI bridge to [bus 03-04]
[ 1.630742] pci 0000:00:1c.1: PCI bridge to [bus 05-06]
[ 1.630837] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
[ 1.630846] pci 0000:00:1c.1: bridge window [mem 0xf1100000-0xf11fffff 64bit pref]
[ 1.630877] pci 0000:00:1c.3: PCI bridge to [bus 09-0a]
[ 1.630975] pci 0000:00:1c.3: bridge window [mem 0xf7e00000-0xf7efffff]
[ 1.630994] pci 0000:00:1c.4: PCI bridge to [bus 0b-0c]
[ 1.631095] pci 0000:00:1c.4: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 1.631111] pci 0000:00:1c.7: PCI bridge to [bus 11-16]
[ 1.631207] pci 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
[ 1.631212] pci 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff]
[ 1.631220] pci 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
[ 1.631226] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.631396] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 1.631434] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 1.631472] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 1.631509] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[ 1.631561] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP08._PRT]
[ 1.631690] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 1.631994] pci0000:00: ACPI _OSC control (0x19) granted
[ 1.636647] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 1.637214] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 1.637773] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
[ 1.638337] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 1.638901] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.639587] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.640277] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 1.640841] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 1.641396] acpi root: \_SB_.PCI0 notify handler installed
[ 1.641446] Found 1 acpi root devices
[ 1.641527] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.641679] vgaarb: loaded
[ 1.641768] vgaarb: bridge control possible 0000:00:02.0
[ 1.641997] SCSI subsystem initialized
[ 1.642150] libata version 3.00 loaded.
[ 1.642250] usbcore: registered new interface driver usbfs
[ 1.642367] usbcore: registered new interface driver hub
[ 1.642486] usbcore: registered new device driver usb
[ 1.642633] Linux media interface: v0.10
[ 1.642744] Linux video capture interface: v2.00
[ 1.643191] wmi: Mapper loaded
[ 1.643325] Advanced Linux Sound Architecture Driver Version 1.0.25.
[ 1.643422] PCI: Using ACPI for IRQ routing
[ 1.645439] PCI: pci_cache_line_size set to 64 bytes
[ 1.645546] reserve RAM buffer: 000000000009d400 - 000000000009ffff
[ 1.645548] reserve RAM buffer: 00000000da4e5000 - 00000000dbffffff
[ 1.645551] reserve RAM buffer: 00000000da793000 - 00000000dbffffff
[ 1.645554] reserve RAM buffer: 00000000daa89000 - 00000000dbffffff
[ 1.645557] reserve RAM buffer: 000000041fe00000 - 000000041fffffff
[ 1.645686] Bluetooth: Core ver 2.16
[ 1.645798] NET: Registered protocol family 31
[ 1.645891] Bluetooth: HCI device and connection manager initialized
[ 1.645987] Bluetooth: HCI socket layer initialized
[ 1.646082] Bluetooth: L2CAP socket layer initialized
[ 1.646177] Bluetooth: SCO socket layer initialized
[ 1.646335] cfg80211: Calling CRDA to update world regulatory domain
[ 1.646542] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 1.646986] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 1.649091] Switching to clocksource hpet
[ 1.649257] pnp: PnP ACPI init
[ 1.649357] ACPI: bus type pnp registered
[ 1.649687] pnp 00:00: [bus 00-3e]
[ 1.649689] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 1.649691] pnp 00:00: [io 0x0cf8-0x0cff]
[ 1.649692] pnp 00:00: [io 0x0d00-0xffff window]
[ 1.649694] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 1.649695] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 1.649697] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 1.649700] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 1.649702] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 1.649704] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 1.649705] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 1.649707] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 1.649708] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 1.649710] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 1.649711] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 1.649713] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 1.649714] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 1.649716] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 1.649717] pnp 00:00: [mem 0xdfa00000-0xfeafffff window]
[ 1.649719] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 1.649784] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 1.649795] pnp 00:01: [io 0x0000-0x001f]
[ 1.649797] pnp 00:01: [io 0x0081-0x0091]
[ 1.649798] pnp 00:01: [io 0x0093-0x009f]
[ 1.649799] pnp 00:01: [io 0x00c0-0x00df]
[ 1.649801] pnp 00:01: [dma 4]
[ 1.649841] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 1.649849] pnp 00:02: [mem 0xff000000-0xffffffff]
[ 1.649887] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 1.649959] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 1.650000] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 1.650011] pnp 00:04: [io 0x002e-0x002f]
[ 1.650012] pnp 00:04: [io 0x004e-0x004f]
[ 1.650013] pnp 00:04: [io 0x0061]
[ 1.650015] pnp 00:04: [io 0x0063]
[ 1.650016] pnp 00:04: [io 0x0065]
[ 1.650017] pnp 00:04: [io 0x0067]
[ 1.650018] pnp 00:04: [io 0x0070]
[ 1.650020] pnp 00:04: [io 0x0080]
[ 1.650021] pnp 00:04: [io 0x0092]
[ 1.650022] pnp 00:04: [io 0x00b2-0x00b3]
[ 1.650024] pnp 00:04: [io 0x0680-0x069f]
[ 1.650026] pnp 00:04: [io 0x1000-0x100f]
[ 1.650027] pnp 00:04: [io 0xffff]
[ 1.650028] pnp 00:04: [io 0xffff]
[ 1.650029] pnp 00:04: [io 0x0400-0x0453]
[ 1.650031] pnp 00:04: [io 0x0458-0x047f]
[ 1.650032] pnp 00:04: [io 0x0500-0x057f]
[ 1.650033] pnp 00:04: [io 0x164e-0x164f]
[ 1.650089] system 00:04: [io 0x0680-0x069f] has been reserved
[ 1.650193] system 00:04: [io 0x1000-0x100f] has been reserved
[ 1.650289] system 00:04: [io 0xffff] has been reserved
[ 1.650384] system 00:04: [io 0xffff] has been reserved
[ 1.650478] system 00:04: [io 0x0400-0x0453] has been reserved
[ 1.650573] system 00:04: [io 0x0458-0x047f] has been reserved
[ 1.650669] system 00:04: [io 0x0500-0x057f] has been reserved
[ 1.650765] system 00:04: [io 0x164e-0x164f] has been reserved
[ 1.650862] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.650871] pnp 00:05: [io 0x0070-0x0077]
[ 1.650881] pnp 00:05: [irq 8]
[ 1.650925] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.650950] pnp 00:06: [io 0x0454-0x0457]
[ 1.651003] system 00:06: [io 0x0454-0x0457] has been reserved
[ 1.651099] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 1.651106] pnp 00:07: [io 0x00f0-0x00ff]
[ 1.651113] pnp 00:07: [irq 13]
[ 1.651154] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 1.651169] pnp 00:08: [io 0x0010-0x001f]
[ 1.651171] pnp 00:08: [io 0x0022-0x003f]
[ 1.651172] pnp 00:08: [io 0x0044-0x005f]
[ 1.651173] pnp 00:08: [io 0x0068-0x006f]
[ 1.651175] pnp 00:08: [io 0x0072-0x007f]
[ 1.651176] pnp 00:08: [io 0x0080]
[ 1.651177] pnp 00:08: [io 0x0084-0x0086]
[ 1.651178] pnp 00:08: [io 0x0088]
[ 1.651180] pnp 00:08: [io 0x008c-0x008e]
[ 1.651181] pnp 00:08: [io 0x0090-0x009f]
[ 1.651182] pnp 00:08: [io 0x00a2-0x00bf]
[ 1.651183] pnp 00:08: [io 0x00e0-0x00ef]
[ 1.651185] pnp 00:08: [io 0x04d0-0x04d1]
[ 1.651186] pnp 00:08: [mem 0xfe800000-0xfe802fff]
[ 1.651242] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 1.651340] system 00:08: [mem 0xfe800000-0xfe802fff] has been reserved
[ 1.651437] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.651454] pnp 00:09: [irq 12]
[ 1.651499] pnp 00:09: Plug and Play ACPI device, IDs DLL04b3 SYN0600 SYN0002 PNP0f13 (active)
[ 1.651512] pnp 00:0a: [io 0x0060]
[ 1.651514] pnp 00:0a: [io 0x0064]
[ 1.651515] pnp 00:0a: [io 0x0062]
[ 1.651517] pnp 00:0a: [io 0x0066]
[ 1.651522] pnp 00:0a: [irq 1]
[ 1.651565] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active)
[ 1.651755] pnp 00:0b: [mem 0xfed1c000-0xfed1ffff]
[ 1.651757] pnp 00:0b: [mem 0xfed10000-0xfed17fff]
[ 1.651758] pnp 00:0b: [mem 0xfed18000-0xfed18fff]
[ 1.651760] pnp 00:0b: [mem 0xfed19000-0xfed19fff]
[ 1.651762] pnp 00:0b: [mem 0xf8000000-0xfbffffff]
[ 1.651763] pnp 00:0b: [mem 0xfed20000-0xfed3ffff]
[ 1.651764] pnp 00:0b: [mem 0xfed90000-0xfed93fff]
[ 1.651766] pnp 00:0b: [mem 0xfed45000-0xfed8ffff]
[ 1.651767] pnp 00:0b: [mem 0xff000000-0xffffffff]
[ 1.651769] pnp 00:0b: [mem 0xfee00000-0xfeefffff]
[ 1.651770] pnp 00:0b: [mem 0xdfa00000-0xdfa00fff]
[ 1.651840] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.651938] system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved
[ 1.652034] system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved
[ 1.652131] system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved
[ 1.652228] system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved
[ 1.652326] system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.652422] system 00:0b: [mem 0xfed90000-0xfed93fff] has been reserved
[ 1.652519] system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 1.652616] system 00:0b: [mem 0xff000000-0xffffffff] has been reserved
[ 1.652714] system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 1.652811] system 00:0b: [mem 0xdfa00000-0xdfa00fff] has been reserved
[ 1.652908] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.652966] pnp 00:0c: [irq 20]
[ 1.653024] pnp 00:0c: Plug and Play ACPI device, IDs SMO8800 (active)
[ 1.653133] pnp 00:0d: [mem 0x20000000-0x201fffff]
[ 1.653135] pnp 00:0d: [mem 0x40000000-0x401fffff]
[ 1.653205] system 00:0d: [mem 0x20000000-0x201fffff] has been reserved
[ 1.653301] system 00:0d: [mem 0x40000000-0x401fffff] has been reserved
[ 1.653397] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 1.653439] pnp: PnP ACPI: found 14 devices
[ 1.653532] ACPI: ACPI bus type pnp unregistered
[ 1.661640] pci 0000:00:1c.0: PCI bridge to [bus 03-04]
[ 1.661745] pci 0000:00:1c.1: PCI bridge to [bus 05-06]
[ 1.661840] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
[ 1.661943] pci 0000:00:1c.1: bridge window [mem 0xf1100000-0xf11fffff 64bit pref]
[ 1.662089] pci 0000:00:1c.3: PCI bridge to [bus 09-0a]
[ 1.662187] pci 0000:00:1c.3: bridge window [mem 0xf7e00000-0xf7efffff]
[ 1.662290] pci 0000:00:1c.4: PCI bridge to [bus 0b-0c]
[ 1.662390] pci 0000:00:1c.4: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 1.662497] pci 0000:00:1c.7: PCI bridge to [bus 11-16]
[ 1.662592] pci 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
[ 1.662693] pci 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff]
[ 1.662793] pci 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
[ 1.664302] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.664303] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.664305] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.664306] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 1.664308] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 1.664309] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 1.664311] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[ 1.664313] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
[ 1.664314] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
[ 1.664316] pci_bus 0000:00: resource 13 [mem 0xdfa00000-0xfeafffff]
[ 1.664317] pci_bus 0000:00: resource 14 [mem 0xfed40000-0xfed44fff]
[ 1.664319] pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
[ 1.664321] pci_bus 0000:05: resource 2 [mem 0xf1100000-0xf11fffff 64bit pref]
[ 1.664323] pci_bus 0000:09: resource 1 [mem 0xf7e00000-0xf7efffff]
[ 1.664324] pci_bus 0000:0b: resource 1 [mem 0xf7d00000-0xf7dfffff]
[ 1.664326] pci_bus 0000:11: resource 0 [io 0xc000-0xdfff]
[ 1.664328] pci_bus 0000:11: resource 1 [mem 0xf6c00000-0xf7cfffff]
[ 1.664329] pci_bus 0000:11: resource 2 [mem 0xf0000000-0xf10fffff 64bit pref]
[ 1.664399] NET: Registered protocol family 2
[ 1.664755] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 1.665730] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.666940] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.667161] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.667256] TCP: reno registered
[ 1.667363] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 1.667509] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 1.667714] NET: Registered protocol family 1
[ 1.667819] pci 0000:00:02.0: Boot video device
[ 1.908996] PCI: CLS 64 bytes, default 64
[ 1.909057] DMAR: No ATSR found
[ 1.909173] IOMMU 0 0xfed90000: using Queued invalidation
[ 1.909269] IOMMU 1 0xfed91000: using Queued invalidation
[ 1.909365] IOMMU: Setting RMRR:
[ 1.909465] IOMMU: Setting identity map for device 0000:00:02.0 [0xdb800000 - 0xdf9fffff]
[ 1.909964] IOMMU: Setting identity map for device 0000:00:1d.0 [0xdad53000 - 0xdad61fff]
[ 1.910128] IOMMU: Setting identity map for device 0000:00:1a.0 [0xdad53000 - 0xdad61fff]
[ 1.910282] IOMMU: Prepare 0-16MiB unity mapping for LPC
[ 1.910383] IOMMU: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff]
[ 1.910816] PCI-DMA: Intel(R) Virtualization Technology for Directed I/O
[ 1.913583] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x1b
[ 1.913688] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x1b
[ 1.913787] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x1b
[ 1.913889] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x1b
[ 1.914027] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.915051] sha1_ssse3: Using AVX optimized SHA-1 implementation
[ 1.916247] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.918121] DLM installed
[ 1.918345] msgmni has been set to 32105
[ 1.919661] NET: Registered protocol family 38
[ 1.919757] async_tx: api initialized (async)
[ 1.919889] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.920035] io scheduler noop registered
[ 1.920127] io scheduler deadline registered
[ 1.920237] io scheduler cfq registered (default)
[ 1.920670] pcieport 0000:00:1c.7: irq 42 for MSI/MSI-X
[ 1.920878] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.920974] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 1.921409] intel_idle: MWAIT substates: 0x21120
[ 1.921410] intel_idle: v0.4 model 0x2A
[ 1.921412] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.921517] ACPI: AC Adapter [AC] (on-line)
[ 1.921723] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 1.922682] ACPI: Lid Switch [LID0]
[ 1.922832] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 1.922980] ACPI: Power Button [PWRB]
[ 1.923129] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 1.923277] ACPI: Sleep Button [SBTN]
[ 1.923423] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.923569] ACPI: Power Button [PWRF]
[ 1.923922] ACPI: Requesting acpi_cpufreq
[ 1.934203] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.934299] ACPI: Thermal Zone [THM] (67 C)
[ 1.934498] GHES: HEST is not enabled!
[ 1.955423] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.956181] Non-volatile memory driver v1.3
[ 1.956599] i8k: unable to get SMM BIOS version
[ 1.959812] Dell laptop SMM driver v1.14 21/02/2005 Massimo Dal Zotto (dz@debian.org)
[ 1.960095] Linux agpgart interface v0.103
[ 1.960278] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
[ 1.960476] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 1.961789] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[ 1.962053] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 1.962226] ipmi message handler version 39.2
[ 1.962328] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
[ 1.962481] Hangcheck: Using getrawmonotonic().
[ 1.962617] [drm] Initialized drm 1.1.0 20060810
[ 1.962943] i915 0000:00:02.0: setting latency timer to 64
[ 1.969303] ACPI: Battery Slot [BAT0] (battery present)
[ 1.999232] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
[ 1.999378] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 1.999837] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[ 1.999845] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 1.999942] [drm] Driver supports precise vblank timestamp query.
[ 2.000065] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.420070] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 2.907332] Refined TSC clocksource calibration: 2793.653 MHz.
[ 2.907431] Switching to clocksource tsc
[ 2.974399] fbcon: inteldrmfb (fb0) is primary device
[ 3.475728] Console: switching to colour frame buffer device 170x48
[ 3.478464] fb0: inteldrmfb frame buffer device
[ 3.478465] drm: registered panic notifier
[ 3.479692] acpi device:34: registered as cooling_device4
[ 3.479926] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4
[ 3.479970] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 3.480032] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 3.480878] loop: module loaded
[ 3.481012] ahci 0000:00:1f.2: version 3.0
[ 3.481060] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
[ 3.481085] ahci: SSS flag set, parallel bus scan disabled
[ 3.496488] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x31 impl SATA mode
[ 3.496596] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
[ 3.496638] ahci 0000:00:1f.2: setting latency timer to 64
[ 3.537181] scsi0 : ahci
[ 3.537312] scsi1 : ahci
[ 3.537405] scsi2 : ahci
[ 3.537495] scsi3 : ahci
[ 3.537584] scsi4 : ahci
[ 3.537677] scsi5 : ahci
[ 3.538005] ata1: SATA max UDMA/133 abar m2048@0xf7f06000 port 0xf7f06100 irq 44
[ 3.538040] ata2: DUMMY
[ 3.539008] ata3: DUMMY
[ 3.539970] ata4: DUMMY
[ 3.540909] ata5: SATA max UDMA/133 abar m2048@0xf7f06000 port 0xf7f06300 irq 44
[ 3.541868] ata6: SATA max UDMA/133 abar m2048@0xf7f06000 port 0xf7f06380 irq 44
[ 3.542946] tun: Universal TUN/TAP device driver, 1.6
[ 3.543890] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 3.544899] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 3.545959] r8169 0000:05:00.0: irq 45 for MSI/MSI-X
[ 3.546113] r8169 0000:05:00.0: eth0: RTL8168e/8111e at 0xffffc900065d2000, 18:03:73:a0:6f:6a, XID 0c200000 IRQ 45
[ 3.547103] r8169 0000:05:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 3.548121] VMware vmxnet3 virtual NIC driver - version 1.1.29.0-k-NAPI
[ 3.549144] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.550125] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 3.550129] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 3.551085] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 3.552060] ehci_hcd 0000:00:1a.0: debug port 2
[ 3.556864] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 3.556877] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7f08000
[ 3.576345] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 3.577374] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.578309] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.579242] usb usb1: Product: EHCI Host Controller
[ 3.580162] usb usb1: Manufacturer: Linux 3.4.0-rc3-default ehci_hcd
[ 3.581091] usb usb1: SerialNumber: 0000:00:1a.0
[ 3.582137] hub 1-0:1.0: USB hub found
[ 3.583069] hub 1-0:1.0: 2 ports detected
[ 3.584068] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3.584071] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 3.585007] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 3.585969] ehci_hcd 0000:00:1d.0: debug port 2
[ 3.590780] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 3.590792] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7f07000
[ 3.606297] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 3.607316] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.608228] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.609140] usb usb2: Product: EHCI Host Controller
[ 3.610041] usb usb2: Manufacturer: Linux 3.4.0-rc3-default ehci_hcd
[ 3.610951] usb usb2: SerialNumber: 0000:00:1d.0
[ 3.611948] hub 2-0:1.0: USB hub found
[ 3.612832] hub 2-0:1.0: 2 ports detected
[ 3.613757] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.614708] xhci_hcd 0000:0b:00.0: xHCI Host Controller
[ 3.615612] xhci_hcd 0000:0b:00.0: new USB bus registered, assigned bus number 3
[ 3.616720] xhci_hcd 0000:0b:00.0: irq 16, io mem 0xf7d00000
[ 3.617718] xhci_hcd 0000:0b:00.0: irq 46 for MSI/MSI-X
[ 3.617722] xhci_hcd 0000:0b:00.0: irq 47 for MSI/MSI-X
[ 3.617727] xhci_hcd 0000:0b:00.0: irq 48 for MSI/MSI-X
[ 3.617731] xhci_hcd 0000:0b:00.0: irq 49 for MSI/MSI-X
[ 3.617736] xhci_hcd 0000:0b:00.0: irq 50 for MSI/MSI-X
[ 3.617828] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.618779] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.619726] usb usb3: Product: xHCI Host Controller
[ 3.620655] usb usb3: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
[ 3.621604] usb usb3: SerialNumber: 0000:0b:00.0
[ 3.622642] xHCI xhci_add_endpoint called for root hub
[ 3.622644] xHCI xhci_check_bandwidth called for root hub
[ 3.622679] hub 3-0:1.0: USB hub found
[ 3.623639] hub 3-0:1.0: 2 ports detected
[ 3.624637] xhci_hcd 0000:0b:00.0: xHCI Host Controller
[ 3.625582] xhci_hcd 0000:0b:00.0: new USB bus registered, assigned bus number 4
[ 3.626557] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 3.627512] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.628450] usb usb4: Product: xHCI Host Controller
[ 3.629371] usb usb4: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
[ 3.630285] usb usb4: SerialNumber: 0000:0b:00.0
[ 3.631257] xHCI xhci_add_endpoint called for root hub
[ 3.631259] xHCI xhci_check_bandwidth called for root hub
[ 3.631292] hub 4-0:1.0: USB hub found
[ 3.632200] hub 4-0:1.0: 2 ports detected
[ 3.633192] usbcore: registered new interface driver uas
[ 3.634158] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2] at 0x60,0x64 irq 1,12
[ 3.637319] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.638246] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.639272] mousedev: PS/2 mouse device common for all mice
[ 3.640435] rtc_cmos 00:05: RTC can wake from S4
[ 3.641469] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 3.642406] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 3.643341] i2c /dev entries driver
[ 3.644638] gspca_main: v2.14.0 registered
[ 3.645588] usbcore: registered new interface driver uvcvideo
[ 3.646529] USB Video Class driver (1.1.1)
[ 3.647537] coretemp coretemp.0: TjMax is 100 degrees C
[ 3.647544] coretemp coretemp.0: TjMax is 100 degrees C
[ 3.647552] coretemp coretemp.0: TjMax is 100 degrees C
[ 3.647580] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 3.648590] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 3.649596] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 3.650552] iTCO_vendor_support: vendor-support=0
[ 3.651519] md: linear personality registered for level -1
[ 3.652463] md: raid0 personality registered for level 0
[ 3.653402] md: raid1 personality registered for level 1
[ 3.654338] md: raid10 personality registered for level 10
[ 3.655271] md: raid6 personality registered for level 6
[ 3.656207] md: raid5 personality registered for level 5
[ 3.656276] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 3.658104] md: raid4 personality registered for level 4
[ 3.659088] device-mapper: uevent: version 1.0.3
[ 3.660205] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 3.661350] device-mapper: dm-log-userspace: version 1.1.0 loaded
[ 3.662337] usbcore: registered new interface driver btusb
[ 3.663369] cpuidle: using governor ladder
[ 3.664410] cpuidle: using governor menu
[ 3.665405] sdhci: Secure Digital Host Controller Interface driver
[ 3.666378] sdhci: Copyright(c) Pierre Ossman
[ 3.668000] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 3.669793] usbcore: registered new interface driver usbhid
[ 3.670768] usbhid: USB HID core driver
[ 3.671784] mei 0000:00:16.0: setting latency timer to 64
[ 3.671831] mei 0000:00:16.0: irq 51 for MSI/MSI-X
[ 3.700303] input: Dell WMI hotkeys as /devices/virtual/input/input6
[ 3.711523] intel_oaktrail: Platform not recognized (You could try the module's force-parameter)
[ 3.711759] snd_hda_intel 0000:00:1b.0: irq 52 for MSI/MSI-X
[ 3.885969] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.892175] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 3.893529] ata1.00: ATA-8: WDC WD7500BPKT-75PK4T0, 01.01A01, max UDMA/133
[ 3.894615] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 3.895912] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 3.900670] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 3.902062] ata1.00: configured for UDMA/133
[ 3.916121] scsi 0:0:0:0: Direct-Access ATA WDC WD7500BPKT-7 01.0 PQ: 0 ANSI: 5
[ 3.917693] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[ 3.917870] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.919824] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 3.920983] sd 0:0:0:0: [sda] Write Protect is off
[ 3.922022] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.922097] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.023121] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 4.025120] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.046188] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 4.047310] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.049020] hub 1-1:1.0: USB hub found
[ 4.050316] hub 1-1:1.0: 6 ports detected
[ 4.165564] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 4.265392] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.269883] ata5.00: ATAPI: PLDS DVD+/-RW DS-8A8SH, KD11, max UDMA/100
[ 4.276280] ata5.00: configured for UDMA/100
[ 4.289871] scsi 4:0:0:0: CD-ROM PLDS DVD+-RW DS-8A8SH KD11 PQ: 0 ANSI: 5
[ 4.304908] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.306062] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.307575] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 4.307852] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 4.315654] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 4.316808] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.318417] hub 2-1:1.0: USB hub found
[ 4.319606] hub 2-1:1.0: 8 ports detected
[ 4.326750] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
[ 4.355353] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 4.356547] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 4.357787] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 4.359402] ALSA device list:
[ 4.360516] #0: HDA Intel PCH at 0xf7f00000 irq 52
[ 4.361692] TCP: cubic registered
[ 4.362792] NET: Registered protocol family 17
[ 4.363891] Bluetooth: RFCOMM TTY layer initialized
[ 4.364984] Bluetooth: RFCOMM socket layer initialized
[ 4.366066] Bluetooth: RFCOMM ver 1.11
[ 4.367121] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 4.368164] Bluetooth: BNEP filters: protocol multicast
[ 4.369209] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 4.370554] sctp: Hash tables configured (established 65536 bind 65536)
[ 4.371773] Registering the dns_resolver key type
[ 4.373098] PM: Checking hibernation image partition /dev/sda6
[ 4.373103] PM: Hibernation image partition 8:6 present
[ 4.373104] PM: Looking for hibernation image.
[ 4.379551] PM: Image not found (code -22)
[ 4.379554] PM: Hibernation image not present or could not be loaded.
[ 4.379567] registered taskstats version 1
[ 4.381800] rtc_cmos 00:05: setting system clock to 2012-04-18 22:42:23 UTC (1334788943)
[ 4.383549] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
[ 4.435157] usb 3-1: new low-speed USB device number 2 using xhci_hcd
[ 4.488467] usb 3-1: New USB device found, idVendor=046d, idProduct=c050
[ 4.489448] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.490343] usb 3-1: Product: USB-PS/2 Optical Mouse
[ 4.491231] usb 3-1: Manufacturer: Logitech
[ 4.492255] usb 3-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 4.510631] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1c.4/0000:0b:00.0/usb3/3-1/3-1:1.0/input/input11
[ 4.511703] generic-usb 0003:046D:C050.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:0b:00.0-1/input0
[ 4.585140] usb 1-1.5: new high-speed USB device number 3 using ehci_hcd
[ 4.635327] input: DualPoint Stick as /devices/platform/i8042/serio1/input/input12
[ 4.650765] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input13
[ 4.654768] ata6: SATA link down (SStatus 0 SControl 300)
[ 4.655878] md: Waiting for all devices to be available before autodetect
[ 4.656813] md: If you don't use raid, use raid=noautodetect
[ 4.658080] md: Autodetecting RAID arrays.
[ 4.659004] md: Scanned 0 and added 0 devices.
[ 4.659962] md: autorun ...
[ 4.660896] md: ... autorun DONE.
[ 4.702404] usb 1-1.5: New USB device found, idVendor=05ca, idProduct=1820
[ 4.703427] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.704330] usb 1-1.5: Product: Laptop_Integrated_Webcam_FHD
[ 4.705251] usb 1-1.5: Manufacturer: CN01MWM9724871A4KB28A00
[ 4.707094] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_FHD (05ca:1820)
[ 4.709886] input: Laptop_Integrated_Webcam_FHD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input14
[ 4.713738] kjournald starting. Commit interval 5 seconds
[ 4.713862] EXT3-fs (sda5): mounted filesystem with writeback data mode
[ 4.713870] VFS: Mounted root (ext3 filesystem) readonly on device 8:5.
[ 4.755042] devtmpfs: mounted
[ 4.756101] Freeing unused kernel memory: 544k freed
[ 4.784784] usb 2-1.2: new low-speed USB device number 3 using ehci_hcd
[ 4.902726] usb 2-1.2: New USB device found, idVendor=04f2, idProduct=0116
[ 4.903799] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.904784] usb 2-1.2: Product: USB Keyboard
[ 4.905711] usb 2-1.2: Manufacturer: CHICONY
[ 4.911973] input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input15
[ 4.913087] generic-usb 0003:04F2:0116.0002: input,hidraw1: USB HID v1.10 Keyboard [CHICONY USB Keyboard] on usb-0000:00:1d.0-1.2/input0
[ 5.004514] usb 2-1.3: new full-speed USB device number 4 using ehci_hcd
[ 5.115869] usb 2-1.3: New USB device found, idVendor=138a, idProduct=0011
[ 5.116961] usb 2-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[ 5.117953] usb 2-1.3: SerialNumber: 56ed5821afe2
[ 5.194230] usb 2-1.6: new high-speed USB device number 5 using ehci_hcd
[ 5.566746] usb 2-1.6: New USB device found, idVendor=0bda, idProduct=0138
[ 5.567810] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5.568791] usb 2-1.6: Product: USB2.0-CRW
[ 5.569772] usb 2-1.6: Manufacturer: Generic
[ 5.570742] usb 2-1.6: SerialNumber: 20090516388200000
[ 7.778619] udevd[1749]: starting version 171
[ 9.597733] ACPI Warning: 0x000000000000f040-0x000000000000f05f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120320/utaddress-251)
[ 9.597739] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.898386] Initializing USB Mass Storage driver...
[ 9.898480] scsi6 : usb-storage 2-1.6:1.0
[ 9.898542] usbcore: registered new interface driver usb-storage
[ 9.898543] USB Mass Storage support registered.
[ 10.039123] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d
[ 10.039125] Copyright(c) 2003-2012 Intel Corporation
[ 10.039302] iwlwifi 0000:09:00.0: pci_resource_len = 0x00002000
[ 10.039304] iwlwifi 0000:09:00.0: pci_resource_base = ffffc90006684000
[ 10.039305] iwlwifi 0000:09:00.0: HW Revision ID = 0x34
[ 10.039398] iwlwifi 0000:09:00.0: irq 53 for MSI/MSI-X
[ 10.468620] iwlwifi 0000:09:00.0: loaded firmware version 17.168.5.2 build 35905
[ 10.468732] iwlwifi 0000:09:00.0: CONFIG_IWLWIFI_DEBUG enabled
[ 10.468734] iwlwifi 0000:09:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[ 10.468735] iwlwifi 0000:09:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[ 10.468737] iwlwifi 0000:09:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled
[ 10.468739] iwlwifi 0000:09:00.0: CONFIG_IWLWIFI_P2P disabled
[ 10.468741] iwlwifi 0000:09:00.0: Detected Intel(R) Centrino(R) Wireless-N 1030 BGN, REV=0xB0
[ 10.468788] iwlwifi 0000:09:00.0: L1 Disabled; Enabling L0S
[ 10.485938] iwlwifi 0000:09:00.0: device EEPROM VER=0x71a, CALIB=0x6
[ 10.485940] iwlwifi 0000:09:00.0: Device SKU: 0x150
[ 10.485942] iwlwifi 0000:09:00.0: Valid Tx ant: 0x1, Valid Rx ant: 0x3
[ 10.485953] iwlwifi 0000:09:00.0: Tunable channels: 13 802.11bg, 0 802.11a channels
[ 10.486034] Registered led device: phy0-led
[ 10.486102] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 10.898676] scsi 6:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 10.898856] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 10.904249] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 12.119487] EXT3-fs (sda5): using internal journal
[ 12.377739] Adding 4998972k swap on /dev/sda6. Priority:-1 extents:1 across:4998972k
[ 16.118391] r8169 0000:05:00.0: eth0: unable to load firmware patch rtl_nic/rtl8168e-2.fw (-2)
[ 16.141500] r8169 0000:05:00.0: eth0: link down
[ 16.141531] r8169 0000:05:00.0: eth0: link down
[ 17.857343] r8169 0000:05:00.0: eth0: link up
[ 21.899925] microcode: CPU0 updated to revision 0x25, date = 2011-10-11
[ 21.900268] microcode: CPU1 updated to revision 0x25, date = 2011-10-11
[ 21.900598] microcode: CPU2 updated to revision 0x25, date = 2011-10-11
[ 21.900946] microcode: CPU3 updated to revision 0x25, date = 2011-10-11
[ 21.939883] [drm] Changing LVDS panel from (+hsync, -vsync) to (-hsync, -vsync)
[ 24.143665] r8169 0000:05:00.0: eth0: link down
[ 26.967864] r8169 0000:05:00.0: eth0: link up
[ 41.570546] [drm] Changing LVDS panel from (-hsync, -vsync) to (+hsync, -vsync)
[ 45.899781] ata1.00: configured for UDMA/133
[ 45.899785] ata1: EH complete
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: 3.2.11: PCI Express card cannot be re-detected withing cca 60sec timeframe
2012-04-18 22:55 ` Martin Mokrejs
@ 2012-04-19 1:57 ` Yinghai Lu
2012-04-19 3:16 ` Mark Lord
0 siblings, 1 reply; 55+ messages in thread
From: Yinghai Lu @ 2012-04-19 1:57 UTC (permalink / raw)
To: Martin Mokrejs; +Cc: linux-pci, Linux Kernel Mailing List
On Wed, Apr 18, 2012 at 3:55 PM, Martin Mokrejs
<mmokrejs@fold.natur.cuni.cz> wrote:
>
>>>> Can you try to use acpiphp instead of pciehp?
>>>
>>> Umm. I do have acpiphp in my kernel already. I am rather attaching my .config,
>>> please me know what you want me to do. My kernel command line could be seen
>>> in my previous posts in the dmesg file.
>>
>> remove
>>
>> CONFIG_HOTPLUG_PCI_PCIE=y
>
> The express card slot seems "dead", nothing happens when I plugin the card.
> I have attached the lspci of the bridge (when card p[lugged in), in case there is
> something of interest to you. ;-) Same for dmesg.
>
>
>
> # grep HOTPLUG /usr/src/linux-3.4-rc3__patches_yinghai_jeff_garzik/.config
> CONFIG_HOTPLUG=y
> # CONFIG_MEMORY_HOTPLUG is not set
> CONFIG_HOTPLUG_CPU=y
> CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
> CONFIG_ACPI_HOTPLUG_CPU=y
> # CONFIG_HOTPLUG_PCI_PCIE is not set
> CONFIG_HOTPLUG_PCI=y
> # CONFIG_HOTPLUG_PCI_FAKE is not set
> CONFIG_HOTPLUG_PCI_ACPI=y
> # CONFIG_HOTPLUG_PCI_ACPI_IBM is not set
> # CONFIG_HOTPLUG_PCI_CPCI is not set
> CONFIG_HOTPLUG_PCI_SHPC=m
> #
>
>
> The echo commands just do:
>
> [ 616.477711] pcieport 0000:00:1c.7: pcie_link_disable_set: lnk_ctrl = 53
> [ 637.242990] pcieport 0000:00:1c.7: pcie_link_disable_set: lnk_ctrl = 43
> [ 641.791748] pcieport 0000:00:1c.7: pcie_link_disable_set: lnk_ctrl = 52
> [ 654.317009] pcieport 0000:00:1c.7: pcie_link_disable_set: lnk_ctrl = 42
> [ 664.238154] pcieport 0000:00:1c.7: pcie_link_disable_set: lnk_ctrl = 52
> [ 686.101576] pcieport 0000:00:1c.7: pcie_link_disable_set: lnk_ctrl = 43
>
looks your BIOS does not support acpiphp.
Maybe you have to stay with
echo 1 > .../pcie_link_disable
echo 0 > .../pcie_link_disable
after removal every time.
Yinghai
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: 3.2.11: PCI Express card cannot be re-detected withing cca 60sec timeframe
2012-04-19 1:57 ` Yinghai Lu
@ 2012-04-19 3:16 ` Mark Lord
0 siblings, 0 replies; 55+ messages in thread
From: Mark Lord @ 2012-04-19 3:16 UTC (permalink / raw)
To: Yinghai Lu; +Cc: Martin Mokrejs, linux-pci, Linux Kernel Mailing List
On 12-04-18 09:57 PM, Yinghai Lu wrote:
..
> looks your BIOS does not support acpiphp.
>
> Maybe you have to stay with
>
> echo 1 > .../pcie_link_disable
> echo 0 > .../pcie_link_disable
>
> after removal every time.
Did it work with earlier kernels?
If so, then that's breakage, and requiring random users
to discover mysterious incantations to keep their hardware
working after a kernel upgrade is totally unacceptable.
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: 3.2.11: PCI Express card cannot be re-detected withing cca 60sec timeframe
2012-04-18 19:48 ` Yinghai Lu
2012-04-18 20:29 ` Martin Mokrejs
@ 2012-04-19 17:32 ` Martin Mokrejs
2012-04-19 18:13 ` Yinghai Lu
2012-05-04 15:58 ` Martin Mokrejs
2 siblings, 1 reply; 55+ messages in thread
From: Martin Mokrejs @ 2012-04-19 17:32 UTC (permalink / raw)
To: Yinghai Lu; +Cc: linux-pci, Linux Kernel Mailing List
Yinghai Lu wrote:
> On Wed, Apr 18, 2012 at 10:53 AM, Martin Mokrejs
> <mmokrejs@fold.natur.cuni.cz> wrote:
>>> After you remove USB3 expresscard, you need to
>>>
>>> echo 1 > /sys/devices/pci0000\:00/0000\:00\:1c.7/pcie_link_disable
>>> then
>>> echo 0 > /sys/devices/pci0000\:00/0000\:00\:1c.7/pcie_link_disable
>>
>> So without these two echo commands the is no improvement/fix.
>>
>> [ 686.701306] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 8
>> [ 686.701316] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
>> [ 686.701319] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
>> [ 686.701357] pciehp 0000:00:1c.7:pcie04: Surprise Removal
>> [ 686.701390] pciehp 0000:00:1c.7:pcie04: check_link_active: lnk_status = 7011
>> [ 686.809763] pciehp 0000:00:1c.7:pcie04: pciehp_check_link_status: lnk_status = 7011
> ...
>> [ 686.833678] hub 6-0:1.0: 2 ports detected
>>
>> echo 1 > /sys/devices/pci0000\:00/0000\:00\:1c.7/pcie_link_disable
>>
>> [ 716.999938] pcieport 0000:00:1c.7: pcie_link_disable_set: lnk_ctrl = 53
>> [ 717.024647] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 8
>> [ 717.024657] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
>> [ 717.024665] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
>> [ 717.024723] pciehp 0000:00:1c.7:pcie04: Surprise Removal
>> [ 717.024753] pciehp 0000:00:1c.7:pcie04: Disabling domain:bus:device=0000:11:00
>> [ 717.024756] pciehp 0000:00:1c.7:pcie04: pciehp_unconfigure_device: domain:bus:dev = 0000:11:00
> ..
>> [ 717.045197] pci 0000:11:00.0: freeing pci_dev info
>>
>> echo 0 > /sys/devices/pci0000\:00/0000\:00\:1c.7/pcie_link_disable
>>
>> [ 748.456914] pcieport 0000:00:1c.7: pcie_link_disable_set: lnk_ctrl = 40
>>
>
> so it is chipset problem, it does not detect and report the presence
> of the card after that link is removed.
Hi Yinghai,
this brought me to and issue with "Intel® 6 Series Express Chipset B2 stepping" chips
having enabled SATA ports 2-5. This is my case:
[ 3.037832] ahci 0000:00:1f.2: version 3.0
[ 3.037880] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
[ 3.037906] ahci: SSS flag set, parallel bus scan disabled
[ 3.048233] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x31 impl SATA mode
[ 3.048335] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
[ 3.048371] ahci 0000:00:1f.2: setting latency timer to 64
[ 3.088902] scsi0 : ahci
[ 3.089010] scsi1 : ahci
[ 3.089098] scsi2 : ahci
[ 3.089185] scsi3 : ahci
[ 3.089272] scsi4 : ahci
[ 3.089361] scsi5 : ahci
[ 3.090528] ata1: SATA max UDMA/133 abar m2048@0xf7f06000 port 0xf7f06100 irq 44
[ 3.091400] ata2: DUMMY
[ 3.092262] ata3: DUMMY
[ 3.093112] ata4: DUMMY
[ 3.093952] ata5: SATA max UDMA/133 abar m2048@0xf7f06000 port 0xf7f06300 irq 44
[ 3.094803] ata6: SATA max UDMA/133 abar m2048@0xf7f06000 port 0xf7f06380 irq 44
Is this bug anyhow related to this already known chipset issue?
http://support.dell.com/support/topics/global.aspx/support/kcs/document?c=us&cs=04&docid=389728&l=en&s=bsd
http://www.intel.com/support/chipsets/6/sb/CS-032521.htm
http://www.intel.com/support/chipsets/6/sb/CS-032521.htm
>
So you found two issues, right?
Issue 1:
Yinghai Lu wrote:
> for USB 3.0:
> SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
> Changed: MRL- PresDet- LinkState+
>
> PresDet+: mean that card is still there. so no interrupt is generated
> by chipset.
>
> that present bit is decide by by inband link or out of band.
>
> sometimes when out of band pres is no, present bit could be keep flip
> around because in root port try to retrain to detect ...
> but it is not the case.
>
> the pin "CPPE# PCI Express interface presence detect" should get into
> hotplug FPGA in motherboard.
>
> You may need to check with vendor about if there is any problem with
> that hotplug FPGA.
Issue 2:
>>> Can you try to use acpiphp instead of pciehp?
>
> looks your BIOS does not support acpiphp.
>
> Maybe you have to stay with
>
> echo 1 > .../pcie_link_disable
> echo 0 > .../pcie_link_disable
>
> after removal every time.
>
> Yinghai
Does it make sense to report this to Dell (that it does not support ACPI hotplug)?
Can they fix it with BIOS or whatever? Thay will anyways replace my motherboard
in the laptop if my system is really affected.
Can I just return the thing after 2.5 months completely?
Thanks,
Martin
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: 3.2.11: PCI Express card cannot be re-detected withing cca 60sec timeframe
2012-04-19 17:32 ` Martin Mokrejs
@ 2012-04-19 18:13 ` Yinghai Lu
0 siblings, 0 replies; 55+ messages in thread
From: Yinghai Lu @ 2012-04-19 18:13 UTC (permalink / raw)
To: Martin Mokrejs; +Cc: linux-pci, Linux Kernel Mailing List
On Thu, Apr 19, 2012 at 10:32 AM, Martin Mokrejs
<mmokrejs@fold.natur.cuni.cz> wrote:
> this brought me to and issue with "Intel® 6 Series Express Chipset B2 stepping" chips
> having enabled SATA ports 2-5. This is my case:
>
> [ 3.037832] ahci 0000:00:1f.2: version 3.0
> [ 3.037880] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
> [ 3.037906] ahci: SSS flag set, parallel bus scan disabled
> [ 3.048233] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x31 impl SATA mode
> [ 3.048335] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
> [ 3.048371] ahci 0000:00:1f.2: setting latency timer to 64
> [ 3.088902] scsi0 : ahci
> [ 3.089010] scsi1 : ahci
> [ 3.089098] scsi2 : ahci
> [ 3.089185] scsi3 : ahci
> [ 3.089272] scsi4 : ahci
> [ 3.089361] scsi5 : ahci
> [ 3.090528] ata1: SATA max UDMA/133 abar m2048@0xf7f06000 port 0xf7f06100 irq 44
> [ 3.091400] ata2: DUMMY
> [ 3.092262] ata3: DUMMY
> [ 3.093112] ata4: DUMMY
> [ 3.093952] ata5: SATA max UDMA/133 abar m2048@0xf7f06000 port 0xf7f06300 irq 44
> [ 3.094803] ata6: SATA max UDMA/133 abar m2048@0xf7f06000 port 0xf7f06380 irq 44
>
>
> Is this bug anyhow related to this already known chipset issue?
>
> http://support.dell.com/support/topics/global.aspx/support/kcs/document?c=us&cs=04&docid=389728&l=en&s=bsd
> http://www.intel.com/support/chipsets/6/sb/CS-032521.htm
> http://www.intel.com/support/chipsets/6/sb/CS-032521.htm
>
>>
>
>
> So you found two issues, right?
>
> Issue 1:
>
> Yinghai Lu wrote:
>> for USB 3.0:
>> SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
>> Changed: MRL- PresDet- LinkState+
>>
>> PresDet+: mean that card is still there. so no interrupt is generated
>> by chipset.
>>
>> that present bit is decide by by inband link or out of band.
>>
>> sometimes when out of band pres is no, present bit could be keep flip
>> around because in root port try to retrain to detect ...
>> but it is not the case.
>>
>> the pin "CPPE# PCI Express interface presence detect" should get into
>> hotplug FPGA in motherboard.
>>
>> You may need to check with vendor about if there is any problem with
>> that hotplug FPGA.
Not sure about this one. could be that outofband signal is not used.
>
>
> Issue 2:
>>>> Can you try to use acpiphp instead of pciehp?
>>
>> looks your BIOS does not support acpiphp.
>>
>> Maybe you have to stay with
>>
>> echo 1 > .../pcie_link_disable
>> echo 0 > .../pcie_link_disable
>>
>> after removal every time.
>>
>
> Does it make sense to report this to Dell (that it does not support ACPI hotplug)?
> Can they fix it with BIOS or whatever? Thay will anyways replace my motherboard
> in the laptop if my system is really affected.
even there is intel silicon problem <user can not disable inband
present detecting, and that could report wrong status>
Dell should have good design to workaround it like add logic to check
CPPE and reset the link if needed.
>
> Can I just return the thing after 2.5 months completely?
You need to talk to dell about that.
How about those test on other shipped OS?
Yinghai
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: 3.2.11: PCI Express card cannot be re-detected withing cca 60sec timeframe
2012-04-19 23:16 ` Martin Mokrejs
@ 2012-04-19 21:48 ` Yinghai Lu
2012-04-20 2:06 ` Yinghai Lu
0 siblings, 1 reply; 55+ messages in thread
From: Yinghai Lu @ 2012-04-19 21:48 UTC (permalink / raw)
To: Martin Mokrejs; +Cc: linux-pci, Linux Kernel Mailing List
On Thu, Apr 19, 2012 at 4:16 PM, Martin Mokrejs
<mmokrejs@fold.natur.cuni.cz> wrote:
>
>
> Yinghai Lu wrote:
>> On Wed, Apr 18, 2012 at 1:29 PM, Martin Mokrejs
>> <mmokrejs@fold.natur.cuni.cz> wrote:
>>> Yinghai Lu wrote:
>>>> On Wed, Apr 18, 2012 at 10:53 AM, Martin Mokrejs
>>>> <mmokrejs@fold.natur.cuni.cz> wrote:
>>>>>> After you remove USB3 expresscard, you need to
>>>>>>
>>>>>> echo 1 > /sys/devices/pci0000\:00/0000\:00\:1c.7/pcie_link_disable
>>>>>> then
>>>>>> echo 0 > /sys/devices/pci0000\:00/0000\:00\:1c.7/pcie_link_disable
>>>>>
>>
>> sometimes it report correctly. sometime it does not.
>
> I realized with Win 7 that if the Express Card with the two USB 3.0 ports has an external drive
> connected, its removal gets "always" detected. Probably because USB is polling for the disk and
> realizes that is is gone?
>
> Second observation is that in Device manager if I open the USB controllers list, I see for
> this card a USB HUB and a USB controller (two lines in the listig). If I remove the card
> the listing doesn't get updated. When I open the ROOT HUB properties, on the General tab
> is claimed that it is working well and the system does not realize the card is unplugged
> a long while already. But, if I open properties of the HOST CONTROLLER, it I think updates
> the "General tab" and says something about code 45. And after closing tgis HOST CONTROLLER
> window, the Device manager windows gets refreshed and the two lines related to the card
> disappear.
ok, other OS have same problem.
>
>
>
> I just tried something similar under linux, with all the patches I accumulated for 3.4-rc3
> and posted in my previous emails. It seems linux flips some value so on every second card
> removal it really does realize it was just unplugged.
...
that is really looks like silicon problem.
> Maybe the above is helpful?
> Martin
> P.S.: Meanwhile am waiting for an answer from Dell.
thinkpad 420 only can use acpiphp, because bios does give PCI CAP
control to OS via _OSC, pciehp could not used.
Yinghai
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: 3.2.11: PCI Express card cannot be re-detected withing cca 60sec timeframe
2012-04-18 20:58 ` Yinghai Lu
2012-04-18 22:55 ` Martin Mokrejs
@ 2012-04-19 23:16 ` Martin Mokrejs
2012-04-19 21:48 ` Yinghai Lu
1 sibling, 1 reply; 55+ messages in thread
From: Martin Mokrejs @ 2012-04-19 23:16 UTC (permalink / raw)
To: Yinghai Lu; +Cc: linux-pci, Linux Kernel Mailing List
Yinghai Lu wrote:
> On Wed, Apr 18, 2012 at 1:29 PM, Martin Mokrejs
> <mmokrejs@fold.natur.cuni.cz> wrote:
>> Yinghai Lu wrote:
>>> On Wed, Apr 18, 2012 at 10:53 AM, Martin Mokrejs
>>> <mmokrejs@fold.natur.cuni.cz> wrote:
>>>>> After you remove USB3 expresscard, you need to
>>>>>
>>>>> echo 1 > /sys/devices/pci0000\:00/0000\:00\:1c.7/pcie_link_disable
>>>>> then
>>>>> echo 0 > /sys/devices/pci0000\:00/0000\:00\:1c.7/pcie_link_disable
>>>>
>>>> So without these two echo commands the is no improvement/fix.
>>>>
>>>> [ 686.701306] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 8
>>>> [ 686.701316] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
>>>> [ 686.701319] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
>>>> [ 686.701357] pciehp 0000:00:1c.7:pcie04: Surprise Removal
>>>> [ 686.701390] pciehp 0000:00:1c.7:pcie04: check_link_active: lnk_status = 7011
>>>> [ 686.809763] pciehp 0000:00:1c.7:pcie04: pciehp_check_link_status: lnk_status = 7011
>>> ...
>>>> [ 686.833678] hub 6-0:1.0: 2 ports detected
>>>>
>>>> echo 1 > /sys/devices/pci0000\:00/0000\:00\:1c.7/pcie_link_disable
>>>>
>>>> [ 716.999938] pcieport 0000:00:1c.7: pcie_link_disable_set: lnk_ctrl = 53
>>>> [ 717.024647] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 8
>>>> [ 717.024657] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
>>>> [ 717.024665] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
>>>> [ 717.024723] pciehp 0000:00:1c.7:pcie04: Surprise Removal
>>>> [ 717.024753] pciehp 0000:00:1c.7:pcie04: Disabling domain:bus:device=0000:11:00
>>>> [ 717.024756] pciehp 0000:00:1c.7:pcie04: pciehp_unconfigure_device: domain:bus:dev = 0000:11:00
>>> ..
>>>> [ 717.045197] pci 0000:11:00.0: freeing pci_dev info
>>>>
>>>> echo 0 > /sys/devices/pci0000\:00/0000\:00\:1c.7/pcie_link_disable
>>>>
>>>> [ 748.456914] pcieport 0000:00:1c.7: pcie_link_disable_set: lnk_ctrl = 40
>>>>
>>>
>>> so it is chipset problem, it does not detect and report the presence
>>> of the card after that link is removed.
>>
>> Why doesn't this happen with the FireWire express card?
>
> sometimes it report correctly. sometime it does not.
I realized with Win 7 that if the Express Card with the two USB 3.0 ports has an external drive
connected, its removal gets "always" detected. Probably because USB is polling for the disk and
realizes that is is gone?
Second observation is that in Device manager if I open the USB controllers list, I see for
this card a USB HUB and a USB controller (two lines in the listig). If I remove the card
the listing doesn't get updated. When I open the ROOT HUB properties, on the General tab
is claimed that it is working well and the system does not realize the card is unplugged
a long while already. But, if I open properties of the HOST CONTROLLER, it I think updates
the "General tab" and says something about code 45. And after closing tgis HOST CONTROLLER
window, the Device manager windows gets refreshed and the two lines related to the card
disappear.
I just tried something similar under linux, with all the patches I accumulated for 3.4-rc3
and posted in my previous emails. It seems linux flips some value so on every second card
removal it really does realize it was just unplugged.
Inserted.
Apr 20 00:56:36 vostro kernel: [ 2851.214712] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
Apr 20 00:56:36 vostro kernel: [ 2851.341855] pci 0000:11:00.0: BAR 0: assigned [mem 0xf6c00000-0xf6c01fff 64bit]
Apr 20 00:56:36 vostro kernel: [ 2851.341892] pcieport 0000:00:1c.7: PCI bridge to [bus 11-16]
Apr 20 00:56:36 vostro kernel: [ 2851.341907] pcieport 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
Apr 20 00:56:36 vostro kernel: [ 2851.341912] pcieport 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff]
Apr 20 00:56:36 vostro kernel: [ 2851.341916] pcieport 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
Apr 20 00:56:36 vostro kernel: [ 2851.342042] xhci_hcd 0000:11:00.0: enabling device (0100 -> 0102)
Apr 20 00:56:36 vostro kernel: [ 2851.342083] xhci_hcd 0000:11:00.0: xHCI Host Controller
Apr 20 00:56:36 vostro kernel: [ 2851.342088] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 5
Apr 20 00:56:36 vostro kernel: [ 2851.342391] xhci_hcd 0000:11:00.0: irq 19, io mem 0xf6c00000
Apr 20 00:56:36 vostro kernel: [ 2851.342677] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
Apr 20 00:56:36 vostro kernel: [ 2851.342678] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 20 00:56:36 vostro kernel: [ 2851.342680] usb usb5: Product: xHCI Host Controller
Apr 20 00:56:36 vostro kernel: [ 2851.342681] usb usb5: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
Apr 20 00:56:36 vostro kernel: [ 2851.342682] usb usb5: SerialNumber: 0000:11:00.0
Apr 20 00:56:36 vostro kernel: [ 2851.342855] hub 5-0:1.0: USB hub found
Apr 20 00:56:36 vostro kernel: [ 2851.342868] hub 5-0:1.0: 2 ports detected
Apr 20 00:56:36 vostro kernel: [ 2851.342935] xhci_hcd 0000:11:00.0: xHCI Host Controller
Apr 20 00:56:36 vostro kernel: [ 2851.342938] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 6
Apr 20 00:56:36 vostro kernel: [ 2851.345622] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
Apr 20 00:56:36 vostro kernel: [ 2851.345625] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 20 00:56:36 vostro kernel: [ 2851.345628] usb usb6: Product: xHCI Host Controller
Apr 20 00:56:36 vostro kernel: [ 2851.345629] usb usb6: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
Apr 20 00:56:36 vostro kernel: [ 2851.345631] usb usb6: SerialNumber: 0000:11:00.0
Apr 20 00:56:36 vostro kernel: [ 2851.345738] hub 6-0:1.0: USB hub found
Apr 20 00:56:36 vostro kernel: [ 2851.345756] hub 6-0:1.0: 2 ports detected
Unplugged.
Re-inserted.
Apr 20 00:56:52 vostro kernel: [ 2866.836211] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
Apr 20 00:56:52 vostro kernel: [ 2866.838944] xhci_hcd 0000:11:00.0: remove, state 4
Apr 20 00:56:52 vostro kernel: [ 2866.838950] usb usb6: USB disconnect, device number 1
Apr 20 00:56:52 vostro kernel: [ 2866.839197] xhci_hcd 0000:11:00.0: Host not halted after 16000 microseconds.
Apr 20 00:56:52 vostro kernel: [ 2866.839201] xhci_hcd 0000:11:00.0: USB bus 6 deregistered
Apr 20 00:56:52 vostro kernel: [ 2866.839207] xhci_hcd 0000:11:00.0: remove, state 4
Apr 20 00:56:52 vostro kernel: [ 2866.839211] usb usb5: USB disconnect, device number 1
Apr 20 00:56:52 vostro kernel: [ 2866.839315] xhci_hcd 0000:11:00.0: Host not halted after 16000 microseconds.
Apr 20 00:56:52 vostro kernel: [ 2866.839402] xhci_hcd 0000:11:00.0: USB bus 5 deregistered
Apr 20 00:56:52 vostro kernel: [ 2866.852682] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
Apr 20 00:56:52 vostro kernel: [ 2866.978549] pci 0000:11:00.0: BAR 0: assigned [mem 0xf6c00000-0xf6c01fff 64bit]
Apr 20 00:56:52 vostro kernel: [ 2866.978585] pcieport 0000:00:1c.7: PCI bridge to [bus 11-16]
Apr 20 00:56:52 vostro kernel: [ 2866.978599] pcieport 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
Apr 20 00:56:52 vostro kernel: [ 2866.978604] pcieport 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff]
Apr 20 00:56:52 vostro kernel: [ 2866.978608] pcieport 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
Apr 20 00:56:52 vostro kernel: [ 2866.978737] xhci_hcd 0000:11:00.0: enabling device (0100 -> 0102)
Apr 20 00:56:52 vostro kernel: [ 2866.978811] xhci_hcd 0000:11:00.0: xHCI Host Controller
Apr 20 00:56:52 vostro kernel: [ 2866.978817] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 5
Apr 20 00:56:52 vostro kernel: [ 2866.979125] xhci_hcd 0000:11:00.0: irq 19, io mem 0xf6c00000
Apr 20 00:56:52 vostro kernel: [ 2866.979409] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
Apr 20 00:56:52 vostro kernel: [ 2866.979411] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 20 00:56:52 vostro kernel: [ 2866.979412] usb usb5: Product: xHCI Host Controller
Apr 20 00:56:52 vostro kernel: [ 2866.979413] usb usb5: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
Apr 20 00:56:52 vostro kernel: [ 2866.979414] usb usb5: SerialNumber: 0000:11:00.0
Apr 20 00:56:52 vostro kernel: [ 2866.979571] hub 5-0:1.0: USB hub found
Apr 20 00:56:52 vostro kernel: [ 2866.979584] hub 5-0:1.0: 2 ports detected
Apr 20 00:56:52 vostro kernel: [ 2866.979647] xhci_hcd 0000:11:00.0: xHCI Host Controller
Apr 20 00:56:52 vostro kernel: [ 2866.979650] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 6
Apr 20 00:56:52 vostro kernel: [ 2866.982356] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
Apr 20 00:56:52 vostro kernel: [ 2866.982366] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 20 00:56:52 vostro kernel: [ 2866.982368] usb usb6: Product: xHCI Host Controller
Apr 20 00:56:52 vostro kernel: [ 2866.982369] usb usb6: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
Apr 20 00:56:52 vostro kernel: [ 2866.982371] usb usb6: SerialNumber: 0000:11:00.0
Apr 20 00:56:52 vostro kernel: [ 2866.982505] hub 6-0:1.0: USB hub found
Apr 20 00:56:52 vostro kernel: [ 2866.982526] hub 6-0:1.0: 2 ports detected
Apr 20 00:56:52 vostro kernel: [ 2867.298040] usb 5-1: new high-speed USB device number 2 using xhci_hcd
Apr 20 00:56:52 vostro kernel: [ 2867.322045] usb 5-1: New USB device found, idVendor=13fd, idProduct=0550
Apr 20 00:56:52 vostro kernel: [ 2867.322055] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Apr 20 00:56:52 vostro kernel: [ 2867.322061] usb 5-1: Product: ST9160821A
Apr 20 00:56:52 vostro kernel: [ 2867.322066] usb 5-1: Manufacturer: Initio
Apr 20 00:56:52 vostro kernel: [ 2867.322071] usb 5-1: SerialNumber: 00101005500011B80
Apr 20 00:56:52 vostro kernel: [ 2867.322267] usb 5-1: ep 0x81 - rounding interval to 32768 microframes, ep desc says 0 microframes
Apr 20 00:56:52 vostro kernel: [ 2867.322275] usb 5-1: ep 0x2 - rounding interval to 32768 microframes, ep desc says 0 microframes
Apr 20 00:56:52 vostro kernel: [ 2867.323071] scsi7 : usb-storage 5-1:1.0
Apr 20 00:56:52 vostro kernel: [ 2867.325012] generic-usb 0003:13FD:0550.0003: hiddev0,hidraw2: USB HID v1.10 Device [Initio ST9160821A ] on usb-0000:11:00.0-1/input1
Apr 20 00:56:53 vostro kernel: [ 2868.317504] scsi 7:0:0:0: Direct-Access Initio ST9160821A 3.12 PQ: 0 ANSI: 0
Apr 20 00:56:53 vostro kernel: [ 2868.317653] sd 7:0:0:0: Attached scsi generic sg3 type 0
Apr 20 00:56:53 vostro kernel: [ 2868.317882] sd 7:0:0:0: [sdc] 312581808 512-byte logical blocks: (160 GB/149 GiB)
Apr 20 00:56:53 vostro kernel: [ 2868.318506] sd 7:0:0:0: [sdc] Write Protect is off
Apr 20 00:56:53 vostro kernel: [ 2868.339644] sdc: sdc1 sdc2
Apr 20 00:56:53 vostro kernel: [ 2868.341664] sd 7:0:0:0: [sdc] Attached SCSI disk
Apr 20 00:56:57 vostro kernel: [ 2872.458564] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
Apr 20 00:56:57 vostro kernel: [ 2872.460502] xhci_hcd 0000:11:00.0: remove, state 4
Apr 20 00:56:57 vostro kernel: [ 2872.460508] usb usb6: USB disconnect, device number 1
Apr 20 00:56:57 vostro kernel: [ 2872.460632] xhci_hcd 0000:11:00.0: Host not halted after 16000 microseconds.
Apr 20 00:56:57 vostro kernel: [ 2872.460636] xhci_hcd 0000:11:00.0: USB bus 6 deregistered
Apr 20 00:56:57 vostro kernel: [ 2872.460642] xhci_hcd 0000:11:00.0: remove, state 1
Apr 20 00:56:57 vostro kernel: [ 2872.460646] usb usb5: USB disconnect, device number 1
Apr 20 00:56:57 vostro kernel: [ 2872.460648] usb 5-1: USB disconnect, device number 2
Unplugged.
Reinserted.
Apr 20 00:57:13 vostro kernel: [ 2888.039737] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
Unplugged.
Apr 20 00:57:18 vostro kernel: [ 2893.662116] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
Reinserted.
Apr 20 00:57:28 vostro kernel: [ 2903.463451] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
Apr 20 00:57:47 vostro kernel: [ 2922.386047] xhci_hcd 0000:11:00.0: Timeout while waiting for configure endpoint command
Apr 20 00:57:47 vostro kernel: [ 2922.386341] xhci_hcd 0000:11:00.0: Host not halted after 16000 microseconds.
Apr 20 00:57:47 vostro kernel: [ 2922.386501] xhci_hcd 0000:11:00.0: USB bus 5 deregistered
Unplugged.
Apr 20 00:57:58 vostro kernel: [ 2933.338121] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
Reinserted.
Apr 20 00:58:20 vostro kernel: [ 2954.976710] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
Apr 20 00:58:20 vostro kernel: [ 2955.097209] pci 0000:11:00.0: BAR 0: assigned [mem 0xf6c00000-0xf6c01fff 64bit]
Apr 20 00:58:20 vostro kernel: [ 2955.097253] pcieport 0000:00:1c.7: PCI bridge to [bus 11-16]
Apr 20 00:58:20 vostro kernel: [ 2955.097256] pcieport 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
Apr 20 00:58:20 vostro kernel: [ 2955.097261] pcieport 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff]
Apr 20 00:58:20 vostro kernel: [ 2955.097265] pcieport 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
Apr 20 00:58:20 vostro kernel: [ 2955.097404] xhci_hcd 0000:11:00.0: enabling device (0100 -> 0102)
Apr 20 00:58:20 vostro kernel: [ 2955.097453] xhci_hcd 0000:11:00.0: xHCI Host Controller
Apr 20 00:58:20 vostro kernel: [ 2955.097457] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 5
Apr 20 00:58:20 vostro kernel: [ 2955.097755] xhci_hcd 0000:11:00.0: irq 19, io mem 0xf6c00000
Apr 20 00:58:20 vostro kernel: [ 2955.098025] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
Apr 20 00:58:20 vostro kernel: [ 2955.098027] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 20 00:58:20 vostro kernel: [ 2955.098028] usb usb5: Product: xHCI Host Controller
Apr 20 00:58:20 vostro kernel: [ 2955.098029] usb usb5: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
Apr 20 00:58:20 vostro kernel: [ 2955.098030] usb usb5: SerialNumber: 0000:11:00.0
Apr 20 00:58:20 vostro kernel: [ 2955.098124] hub 5-0:1.0: USB hub found
Apr 20 00:58:20 vostro kernel: [ 2955.098135] hub 5-0:1.0: 2 ports detected
Apr 20 00:58:20 vostro kernel: [ 2955.098200] xhci_hcd 0000:11:00.0: xHCI Host Controller
Apr 20 00:58:20 vostro kernel: [ 2955.098202] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 6
Apr 20 00:58:20 vostro kernel: [ 2955.100991] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
Apr 20 00:58:20 vostro kernel: [ 2955.100994] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 20 00:58:20 vostro kernel: [ 2955.100996] usb usb6: Product: xHCI Host Controller
Apr 20 00:58:20 vostro kernel: [ 2955.100998] usb usb6: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
Apr 20 00:58:20 vostro kernel: [ 2955.101000] usb usb6: SerialNumber: 0000:11:00.0
Apr 20 00:58:20 vostro kernel: [ 2955.101142] hub 6-0:1.0: USB hub found
Apr 20 00:58:20 vostro kernel: [ 2955.101162] hub 6-0:1.0: 2 ports detected
Apr 20 00:58:20 vostro kernel: [ 2955.416698] usb 5-1: new high-speed USB device number 2 using xhci_hcd
Apr 20 00:58:20 vostro kernel: [ 2955.440419] usb 5-1: New USB device found, idVendor=13fd, idProduct=0550
Apr 20 00:58:20 vostro kernel: [ 2955.440429] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Apr 20 00:58:20 vostro kernel: [ 2955.440436] usb 5-1: Product: ST9160821A
Apr 20 00:58:20 vostro kernel: [ 2955.440441] usb 5-1: Manufacturer: Initio
Apr 20 00:58:20 vostro kernel: [ 2955.440446] usb 5-1: SerialNumber: 00101005500011B80
Apr 20 00:58:20 vostro kernel: [ 2955.440655] usb 5-1: ep 0x81 - rounding interval to 32768 microframes, ep desc says 0 microframes
Apr 20 00:58:20 vostro kernel: [ 2955.440662] usb 5-1: ep 0x2 - rounding interval to 32768 microframes, ep desc says 0 microframes
Apr 20 00:58:20 vostro kernel: [ 2955.441473] scsi8 : usb-storage 5-1:1.0
Apr 20 00:58:20 vostro kernel: [ 2955.443278] generic-usb 0003:13FD:0550.0004: hiddev0,hidraw2: USB HID v1.10 Device [Initio ST9160821A ] on usb-0000:11:00.0-1/input1
Apr 20 00:58:21 vostro kernel: [ 2956.436130] scsi 8:0:0:0: Direct-Access Initio ST9160821A 3.12 PQ: 0 ANSI: 0
Apr 20 00:58:21 vostro kernel: [ 2956.436301] sd 8:0:0:0: Attached scsi generic sg3 type 0
Apr 20 00:58:21 vostro kernel: [ 2956.436509] sd 8:0:0:0: [sdc] 312581808 512-byte logical blocks: (160 GB/149 GiB)
Apr 20 00:58:21 vostro kernel: [ 2956.437119] sd 8:0:0:0: [sdc] Write Protect is off
Apr 20 00:58:21 vostro kernel: [ 2956.619459] sdc: sdc1 sdc2
Apr 20 00:58:21 vostro kernel: [ 2956.622252] sd 8:0:0:0: [sdc] Attached SCSI disk
Apr 20 00:58:32 vostro kernel: [ 2967.162493] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
Apr 20 00:58:32 vostro kernel: [ 2967.169428] xhci_hcd 0000:11:00.0: remove, state 4
Apr 20 00:58:32 vostro kernel: [ 2967.169435] usb usb6: USB disconnect, device number 1
Apr 20 00:58:32 vostro kernel: [ 2967.169597] xhci_hcd 0000:11:00.0: Host not halted after 16000 microseconds.
Apr 20 00:58:32 vostro kernel: [ 2967.169601] xhci_hcd 0000:11:00.0: USB bus 6 deregistered
Apr 20 00:58:32 vostro kernel: [ 2967.169606] xhci_hcd 0000:11:00.0: remove, state 1
Apr 20 00:58:32 vostro kernel: [ 2967.169610] usb usb5: USB disconnect, device number 1
Apr 20 00:58:32 vostro kernel: [ 2967.169612] usb 5-1: USB disconnect, device number 2
Unplugged.
Apr 20 00:59:18 vostro kernel: [ 3012.713612] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
Apr 20 00:59:22 vostro kernel: [ 3017.094745] xhci_hcd 0000:11:00.0: Timeout while waiting for configure endpoint command
Apr 20 00:59:22 vostro kernel: [ 3017.095109] xhci_hcd 0000:11:00.0: Host not halted after 16000 microseconds.
Apr 20 00:59:22 vostro kernel: [ 3017.095268] xhci_hcd 0000:11:00.0: USB bus 5 deregistered
Reinserted.
Apr 20 00:59:36 vostro kernel: [ 3031.310569] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
Apr 20 00:59:47 vostro kernel: [ 3041.609170] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
Apr 20 00:59:47 vostro kernel: [ 3041.738058] pci 0000:11:00.0: BAR 0: assigned [mem 0xf6c00000-0xf6c01fff 64bit]
Apr 20 00:59:47 vostro kernel: [ 3041.738101] pcieport 0000:00:1c.7: PCI bridge to [bus 11-16]
Apr 20 00:59:47 vostro kernel: [ 3041.738105] pcieport 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
Apr 20 00:59:47 vostro kernel: [ 3041.738110] pcieport 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff]
Apr 20 00:59:47 vostro kernel: [ 3041.738114] pcieport 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
Apr 20 00:59:47 vostro kernel: [ 3041.738248] xhci_hcd 0000:11:00.0: enabling device (0100 -> 0102)
Apr 20 00:59:47 vostro kernel: [ 3041.738325] xhci_hcd 0000:11:00.0: xHCI Host Controller
Apr 20 00:59:47 vostro kernel: [ 3041.738331] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 5
Apr 20 00:59:47 vostro kernel: [ 3041.738615] xhci_hcd 0000:11:00.0: irq 19, io mem 0xf6c00000
Apr 20 00:59:47 vostro kernel: [ 3041.738891] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
Apr 20 00:59:47 vostro kernel: [ 3041.738893] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 20 00:59:47 vostro kernel: [ 3041.738894] usb usb5: Product: xHCI Host Controller
Apr 20 00:59:47 vostro kernel: [ 3041.738896] usb usb5: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
Apr 20 00:59:47 vostro kernel: [ 3041.738897] usb usb5: SerialNumber: 0000:11:00.0
Apr 20 00:59:47 vostro kernel: [ 3041.739076] hub 5-0:1.0: USB hub found
Apr 20 00:59:47 vostro kernel: [ 3041.739088] hub 5-0:1.0: 2 ports detected
Apr 20 00:59:47 vostro kernel: [ 3041.739152] xhci_hcd 0000:11:00.0: xHCI Host Controller
Apr 20 00:59:47 vostro kernel: [ 3041.739154] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 6
Apr 20 00:59:47 vostro kernel: [ 3041.741864] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
Apr 20 00:59:47 vostro kernel: [ 3041.741867] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 20 00:59:47 vostro kernel: [ 3041.741869] usb usb6: Product: xHCI Host Controller
Apr 20 00:59:47 vostro kernel: [ 3041.741870] usb usb6: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
Apr 20 00:59:47 vostro kernel: [ 3041.741872] usb usb6: SerialNumber: 0000:11:00.0
Apr 20 00:59:47 vostro kernel: [ 3041.741999] hub 6-0:1.0: USB hub found
Apr 20 00:59:47 vostro kernel: [ 3041.742017] hub 6-0:1.0: 2 ports detected
Apr 20 00:59:47 vostro kernel: [ 3042.057561] usb 5-1: new high-speed USB device number 2 using xhci_hcd
Apr 20 00:59:47 vostro kernel: [ 3042.081535] usb 5-1: New USB device found, idVendor=13fd, idProduct=0550
Apr 20 00:59:47 vostro kernel: [ 3042.081545] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Apr 20 00:59:47 vostro kernel: [ 3042.081552] usb 5-1: Product: ST9160821A
Apr 20 00:59:47 vostro kernel: [ 3042.081557] usb 5-1: Manufacturer: Initio
Apr 20 00:59:47 vostro kernel: [ 3042.081562] usb 5-1: SerialNumber: 00101005500011B80
Apr 20 00:59:47 vostro kernel: [ 3042.081771] usb 5-1: ep 0x81 - rounding interval to 32768 microframes, ep desc says 0 microframes
Apr 20 00:59:47 vostro kernel: [ 3042.081777] usb 5-1: ep 0x2 - rounding interval to 32768 microframes, ep desc says 0 microframes
Apr 20 00:59:47 vostro kernel: [ 3042.082649] scsi9 : usb-storage 5-1:1.0
Apr 20 00:59:47 vostro kernel: [ 3042.084557] generic-usb 0003:13FD:0550.0005: hiddev0,hidraw2: USB HID v1.10 Device [Initio ST9160821A ] on usb-0000:11:00.0-1/input1
Apr 20 00:59:48 vostro kernel: [ 3043.077000] scsi 9:0:0:0: Direct-Access Initio ST9160821A 3.12 PQ: 0 ANSI: 0
Apr 20 00:59:48 vostro kernel: [ 3043.077169] sd 9:0:0:0: Attached scsi generic sg3 type 0
Apr 20 00:59:48 vostro kernel: [ 3043.077416] sd 9:0:0:0: [sdc] 312581808 512-byte logical blocks: (160 GB/149 GiB)
Apr 20 00:59:48 vostro kernel: [ 3043.078326] sd 9:0:0:0: [sdc] Write Protect is off
Apr 20 00:59:48 vostro kernel: [ 3043.282712] sdc: sdc1 sdc2
Apr 20 00:59:48 vostro kernel: [ 3043.284452] sd 9:0:0:0: [sdc] Attached SCSI disk
Apr 20 00:59:55 vostro kernel: [ 3049.662898] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
Apr 20 00:59:55 vostro kernel: [ 3049.666447] xhci_hcd 0000:11:00.0: remove, state 4
Apr 20 00:59:55 vostro kernel: [ 3049.666453] usb usb6: USB disconnect, device number 1
Apr 20 00:59:55 vostro kernel: [ 3049.666579] xhci_hcd 0000:11:00.0: Host not halted after 16000 microseconds.
Apr 20 00:59:55 vostro kernel: [ 3049.666583] xhci_hcd 0000:11:00.0: USB bus 6 deregistered
Apr 20 00:59:55 vostro kernel: [ 3049.666589] xhci_hcd 0000:11:00.0: remove, state 1
Apr 20 00:59:55 vostro kernel: [ 3049.666593] usb usb5: USB disconnect, device number 1
Apr 20 00:59:55 vostro kernel: [ 3049.666595] usb 5-1: USB disconnect, device number 2
Apr 20 01:00:13 vostro kernel: [ 3067.852697] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
Apr 20 01:00:28 vostro kernel: [ 3082.659655] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
Apr 20 01:00:43 vostro kernel: [ 3097.705565] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
Apr 20 01:00:45 vostro kernel: [ 3099.591892] xhci_hcd 0000:11:00.0: Timeout while waiting for configure endpoint command
Apr 20 01:00:45 vostro kernel: [ 3099.592102] xhci_hcd 0000:11:00.0: Host not halted after 16000 microseconds.
Apr 20 01:00:45 vostro kernel: [ 3099.592256] xhci_hcd 0000:11:00.0: USB bus 5 deregistered
Apr 20 01:00:57 vostro kernel: [ 3111.779422] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
Apr 20 01:01:05 vostro kernel: [ 3120.078599] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
Apr 20 01:01:05 vostro kernel: [ 3120.201123] pci 0000:11:00.0: BAR 0: assigned [mem 0xf6c00000-0xf6c01fff 64bit]
Apr 20 01:01:05 vostro kernel: [ 3120.201165] pcieport 0000:00:1c.7: PCI bridge to [bus 11-16]
Apr 20 01:01:05 vostro kernel: [ 3120.201168] pcieport 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
Apr 20 01:01:05 vostro kernel: [ 3120.201173] pcieport 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff]
Apr 20 01:01:05 vostro kernel: [ 3120.201177] pcieport 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
Apr 20 01:01:05 vostro kernel: [ 3120.201309] xhci_hcd 0000:11:00.0: enabling device (0100 -> 0102)
Apr 20 01:01:05 vostro kernel: [ 3120.201357] xhci_hcd 0000:11:00.0: xHCI Host Controller
Apr 20 01:01:05 vostro kernel: [ 3120.201363] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 5
Apr 20 01:01:05 vostro kernel: [ 3120.201655] xhci_hcd 0000:11:00.0: irq 19, io mem 0xf6c00000
Apr 20 01:01:05 vostro kernel: [ 3120.201920] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
Apr 20 01:01:05 vostro kernel: [ 3120.201922] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 20 01:01:05 vostro kernel: [ 3120.201923] usb usb5: Product: xHCI Host Controller
Apr 20 01:01:05 vostro kernel: [ 3120.201924] usb usb5: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
Apr 20 01:01:05 vostro kernel: [ 3120.201926] usb usb5: SerialNumber: 0000:11:00.0
Apr 20 01:01:05 vostro kernel: [ 3120.202087] hub 5-0:1.0: USB hub found
Apr 20 01:01:05 vostro kernel: [ 3120.202098] hub 5-0:1.0: 2 ports detected
Apr 20 01:01:05 vostro kernel: [ 3120.202163] xhci_hcd 0000:11:00.0: xHCI Host Controller
Apr 20 01:01:05 vostro kernel: [ 3120.202166] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 6
Apr 20 01:01:05 vostro kernel: [ 3120.204905] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
Apr 20 01:01:05 vostro kernel: [ 3120.204908] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 20 01:01:05 vostro kernel: [ 3120.204910] usb usb6: Product: xHCI Host Controller
Apr 20 01:01:05 vostro kernel: [ 3120.204912] usb usb6: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
Apr 20 01:01:05 vostro kernel: [ 3120.204914] usb usb6: SerialNumber: 0000:11:00.0
Apr 20 01:01:05 vostro kernel: [ 3120.205047] hub 6-0:1.0: USB hub found
Apr 20 01:01:05 vostro kernel: [ 3120.205066] hub 6-0:1.0: 2 ports detected
Apr 20 01:01:06 vostro kernel: [ 3120.520711] usb 5-1: new high-speed USB device number 2 using xhci_hcd
Apr 20 01:01:06 vostro kernel: [ 3120.544441] usb 5-1: New USB device found, idVendor=13fd, idProduct=0550
Apr 20 01:01:06 vostro kernel: [ 3120.544451] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Apr 20 01:01:06 vostro kernel: [ 3120.544458] usb 5-1: Product: ST9160821A
Apr 20 01:01:06 vostro kernel: [ 3120.544463] usb 5-1: Manufacturer: Initio
Apr 20 01:01:06 vostro kernel: [ 3120.544467] usb 5-1: SerialNumber: 00101005500011B80
Apr 20 01:01:06 vostro kernel: [ 3120.544659] usb 5-1: ep 0x81 - rounding interval to 32768 microframes, ep desc says 0 microframes
Apr 20 01:01:06 vostro kernel: [ 3120.544666] usb 5-1: ep 0x2 - rounding interval to 32768 microframes, ep desc says 0 microframes
Apr 20 01:01:06 vostro kernel: [ 3120.545482] scsi10 : usb-storage 5-1:1.0
Apr 20 01:01:06 vostro kernel: [ 3120.547430] generic-usb 0003:13FD:0550.0006: hiddev0,hidraw2: USB HID v1.10 Device [Initio ST9160821A ] on usb-0000:11:00.0-1/input1
Apr 20 01:01:07 vostro kernel: [ 3121.540046] scsi 10:0:0:0: Direct-Access Initio ST9160821A 3.12 PQ: 0 ANSI: 0
Apr 20 01:01:07 vostro kernel: [ 3121.540215] sd 10:0:0:0: Attached scsi generic sg3 type 0
Apr 20 01:01:07 vostro kernel: [ 3121.540479] sd 10:0:0:0: [sdc] 312581808 512-byte logical blocks: (160 GB/149 GiB)
Apr 20 01:01:07 vostro kernel: [ 3121.541628] sd 10:0:0:0: [sdc] Write Protect is off
Apr 20 01:01:07 vostro kernel: [ 3121.774199] sdc: sdc1 sdc2
Apr 20 01:01:07 vostro kernel: [ 3121.775939] sd 10:0:0:0: [sdc] Attached SCSI disk
Maybe the above is helpful?
Martin
P.S.: Meanwhile am waiting for an answer from Dell.
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: 3.2.11: PCI Express card cannot be re-detected withing cca 60sec timeframe
2012-04-19 21:48 ` Yinghai Lu
@ 2012-04-20 2:06 ` Yinghai Lu
2012-04-20 11:23 ` Martin Mokrejs
0 siblings, 1 reply; 55+ messages in thread
From: Yinghai Lu @ 2012-04-20 2:06 UTC (permalink / raw)
To: Martin Mokrejs; +Cc: linux-pci, Linux Kernel Mailing List
[-- Attachment #1: Type: text/plain, Size: 613 bytes --]
On Thu, Apr 19, 2012 at 2:48 PM, Yinghai Lu <yinghai@kernel.org> wrote:
> On Thu, Apr 19, 2012 at 4:16 PM, Martin Mokrejs
>> I just tried something similar under linux, with all the patches I accumulated for 3.4-rc3
>> and posted in my previous emails. It seems linux flips some value so on every second card
>> removal it really does realize it was just unplugged.
> ...
>
> that is really looks like silicon problem.
>
please check attached patch. Hope link change bit is flip around...
if there is change, we could add some logic:
check if the device is there, or will reset link to normal state.
Yinghai
[-- Attachment #2: link_change_report.patch --]
[-- Type: application/octet-stream, Size: 2328 bytes --]
Subject: [PATCH] PCI, pciehp: Report pcie link state change
To see if there is some link state change.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
drivers/pci/hotplug/pciehp_hpc.c | 29 +++++++++++++++++++++++++++--
1 file changed, 27 insertions(+), 2 deletions(-)
Index: linux-2.6/drivers/pci/hotplug/pciehp_hpc.c
===================================================================
--- linux-2.6.orig/drivers/pci/hotplug/pciehp_hpc.c
+++ linux-2.6/drivers/pci/hotplug/pciehp_hpc.c
@@ -622,6 +622,25 @@ int pciehp_power_off_slot(struct slot *
return 0;
}
+static u8 pciehp_handle_linkstate_change(struct slot *slot)
+{
+ struct controller *ctrl = slot->ctrl;
+ u16 lnk_status;
+ int retval;
+
+ /* LinkState Change */
+ ctrl_dbg(ctrl, "LinkState change\n");
+
+ retval = pciehp_readw(ctrl, PCI_EXP_LNKSTA, &lnk_status);
+ if (retval) {
+ ctrl_err(ctrl, "Cannot read LNKSTATUS register\n");
+ return 1;
+ }
+ ctrl_info(ctrl, "lnk_status = %x\n", lnk_status);
+
+ return 1;
+}
+
static irqreturn_t pcie_isr(int irq, void *dev_id)
{
struct controller *ctrl = (struct controller *)dev_id;
@@ -643,7 +662,7 @@ static irqreturn_t pcie_isr(int irq, voi
detected &= (PCI_EXP_SLTSTA_ABP | PCI_EXP_SLTSTA_PFD |
PCI_EXP_SLTSTA_MRLSC | PCI_EXP_SLTSTA_PDC |
- PCI_EXP_SLTSTA_CC);
+ PCI_EXP_SLTSTA_CC | PCI_EXP_SLTSTA_DLLSC);
detected &= ~intr_loc;
intr_loc |= detected;
if (!intr_loc)
@@ -667,6 +686,10 @@ static irqreturn_t pcie_isr(int irq, voi
if (!(intr_loc & ~PCI_EXP_SLTSTA_CC))
return IRQ_HANDLED;
+ /* Check Link State Changed */
+ if (intr_loc & PCI_EXP_SLTSTA_DLLSC)
+ pciehp_handle_linkstate_change(slot);
+
/* Check MRL Sensor Changed */
if (intr_loc & PCI_EXP_SLTSTA_MRLSC)
pciehp_handle_switch_change(slot);
@@ -810,10 +833,12 @@ int pcie_enable_notification(struct cont
cmd |= PCI_EXP_SLTCTL_MRLSCE;
if (!pciehp_poll_mode)
cmd |= PCI_EXP_SLTCTL_HPIE | PCI_EXP_SLTCTL_CCIE;
+ cmd |= PCI_EXP_SLTCTL_DLLSCE;
mask = (PCI_EXP_SLTCTL_PDCE | PCI_EXP_SLTCTL_ABPE |
PCI_EXP_SLTCTL_MRLSCE | PCI_EXP_SLTCTL_PFDE |
- PCI_EXP_SLTCTL_HPIE | PCI_EXP_SLTCTL_CCIE);
+ PCI_EXP_SLTCTL_HPIE | PCI_EXP_SLTCTL_CCIE |
+ PCI_EXP_SLTCTL_DLLSCE);
if (pcie_write_cmd(ctrl, cmd, mask)) {
ctrl_err(ctrl, "Cannot enable software notification\n");
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: 3.2.11: PCI Express card cannot be re-detected withing cca 60sec timeframe
2012-04-20 2:06 ` Yinghai Lu
@ 2012-04-20 11:23 ` Martin Mokrejs
2012-04-20 16:01 ` Yinghai Lu
0 siblings, 1 reply; 55+ messages in thread
From: Martin Mokrejs @ 2012-04-20 11:23 UTC (permalink / raw)
To: Yinghai Lu; +Cc: Sarah Sharp, linux-pci, Linux Kernel Mailing List
[-- Attachment #1: Type: text/plain, Size: 22434 bytes --]
Yinghai Lu wrote:
> On Thu, Apr 19, 2012 at 2:48 PM, Yinghai Lu <yinghai@kernel.org> wrote:
>> On Thu, Apr 19, 2012 at 4:16 PM, Martin Mokrejs
>>> I just tried something similar under linux, with all the patches I accumulated for 3.4-rc3
>>> and posted in my previous emails. It seems linux flips some value so on every second card
>>> removal it really does realize it was just unplugged.
>> ...
>>
>> that is really looks like silicon problem.
>>
>
> please check attached patch. Hope link change bit is flip around...
> if there is change, we could add some logic:
> check if the device is there, or will reset link to normal state.
I don't think it helped but maybe you will see some difference:
Apr 20 12:50:57 vostro kernel: [ 94.357228] pciehp 0000:00:1c.7:pcie04: lnk_status = 7011
Apr 20 12:50:57 vostro kernel: [ 94.357232] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
Apr 20 12:50:57 vostro kernel: [ 94.481210] pci 0000:11:00.0: BAR 0: assigned [mem 0xf6c00000-0xf6c01fff 64bit]
Apr 20 12:50:57 vostro kernel: [ 94.481255] pcieport 0000:00:1c.7: PCI bridge to [bus 11-16]
Apr 20 12:50:57 vostro kernel: [ 94.481258] pcieport 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
Apr 20 12:50:57 vostro kernel: [ 94.481263] pcieport 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff]
Apr 20 12:50:57 vostro kernel: [ 94.481267] pcieport 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
Apr 20 12:50:57 vostro kernel: [ 94.481407] xhci_hcd 0000:11:00.0: enabling device (0100 -> 0102)
Apr 20 12:50:57 vostro kernel: [ 94.481463] xhci_hcd 0000:11:00.0: xHCI Host Controller
Apr 20 12:50:57 vostro kernel: [ 94.481468] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 5
Apr 20 12:50:57 vostro kernel: [ 94.481767] xhci_hcd 0000:11:00.0: irq 19, io mem 0xf6c00000
Apr 20 12:50:57 vostro kernel: [ 94.482036] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
Apr 20 12:50:57 vostro kernel: [ 94.482038] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 20 12:50:57 vostro kernel: [ 94.482039] usb usb5: Product: xHCI Host Controller
Apr 20 12:50:57 vostro kernel: [ 94.482040] usb usb5: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
Apr 20 12:50:57 vostro kernel: [ 94.482041] usb usb5: SerialNumber: 0000:11:00.0
Apr 20 12:50:57 vostro kernel: [ 94.482188] hub 5-0:1.0: USB hub found
Apr 20 12:50:57 vostro kernel: [ 94.482198] hub 5-0:1.0: 2 ports detected
Apr 20 12:50:57 vostro kernel: [ 94.482265] xhci_hcd 0000:11:00.0: xHCI Host Controller
Apr 20 12:50:57 vostro kernel: [ 94.482268] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 6
Apr 20 12:50:57 vostro kernel: [ 94.485004] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
Apr 20 12:50:57 vostro kernel: [ 94.485007] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 20 12:50:57 vostro kernel: [ 94.485009] usb usb6: Product: xHCI Host Controller
Apr 20 12:50:57 vostro kernel: [ 94.485011] usb usb6: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
Apr 20 12:50:57 vostro kernel: [ 94.485013] usb usb6: SerialNumber: 0000:11:00.0
Apr 20 12:50:57 vostro kernel: [ 94.485148] hub 6-0:1.0: USB hub found
Apr 20 12:50:57 vostro kernel: [ 94.485167] hub 6-0:1.0: 2 ports detected
Apr 20 12:51:02 vostro kernel: [ 98.754813] usb 5-1: new high-speed USB device number 2 using xhci_hcd
Apr 20 12:51:02 vostro kernel: [ 98.778392] usb 5-1: New USB device found, idVendor=13fd, idProduct=0550
Apr 20 12:51:02 vostro kernel: [ 98.778403] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Apr 20 12:51:02 vostro kernel: [ 98.778409] usb 5-1: Product: ST9160821A
Apr 20 12:51:02 vostro kernel: [ 98.778415] usb 5-1: Manufacturer: Initio
Apr 20 12:51:02 vostro kernel: [ 98.778419] usb 5-1: SerialNumber: 00101005500011B80
Apr 20 12:51:02 vostro kernel: [ 98.778626] usb 5-1: ep 0x81 - rounding interval to 32768 microframes, ep desc says 0 microframes
Apr 20 12:51:02 vostro kernel: [ 98.778632] usb 5-1: ep 0x2 - rounding interval to 32768 microframes, ep desc says 0 microframes
Apr 20 12:51:02 vostro kernel: [ 98.779399] scsi7 : usb-storage 5-1:1.0
Apr 20 12:51:02 vostro kernel: [ 98.781416] generic-usb 0003:13FD:0550.0003: hiddev0,hidraw2: USB HID v1.10 Device [Initio ST9160821A ] on usb-0000:11:00.0-1/input1
Apr 20 12:51:03 vostro kernel: [ 99.774241] scsi 7:0:0:0: Direct-Access Initio ST9160821A 3.12 PQ: 0 ANSI: 0
Apr 20 12:51:03 vostro kernel: [ 99.774396] sd 7:0:0:0: Attached scsi generic sg3 type 0
Apr 20 12:51:03 vostro kernel: [ 99.774615] sd 7:0:0:0: [sdc] 312581808 512-byte logical blocks: (160 GB/149 GiB)
Apr 20 12:51:03 vostro kernel: [ 99.775241] sd 7:0:0:0: [sdc] Write Protect is off
Apr 20 12:51:03 vostro kernel: [ 99.996721] sdc: sdc1 sdc2
Apr 20 12:51:03 vostro kernel: [ 99.998520] sd 7:0:0:0: [sdc] Attached SCSI disk
re-moved
Apr 20 12:51:45 vostro kernel: [ 142.235281] pciehp 0000:00:1c.7:pcie04: lnk_status = 5011
Apr 20 12:51:45 vostro kernel: [ 142.235286] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
Apr 20 12:51:45 vostro kernel: [ 142.240178] xhci_hcd 0000:11:00.0: remove, state 4
Apr 20 12:51:45 vostro kernel: [ 142.240185] usb usb6: USB disconnect, device number 1
Apr 20 12:51:45 vostro kernel: [ 142.240323] xhci_hcd 0000:11:00.0: Host not halted after 16000 microseconds.
Apr 20 12:51:45 vostro kernel: [ 142.240326] xhci_hcd 0000:11:00.0: USB bus 6 deregistered
Apr 20 12:51:45 vostro kernel: [ 142.240332] xhci_hcd 0000:11:00.0: remove, state 1
Apr 20 12:51:45 vostro kernel: [ 142.240337] usb usb5: USB disconnect, device number 1
Apr 20 12:51:45 vostro kernel: [ 142.240339] usb 5-1: USB disconnect, device number 2
Apr 20 12:52:35 vostro kernel: [ 192.165855] xhci_hcd 0000:11:00.0: Timeout while waiting for configure endpoint command
Apr 20 12:52:35 vostro kernel: [ 192.166142] xhci_hcd 0000:11:00.0: Host not halted after 16000 microseconds.
Apr 20 12:52:35 vostro kernel: [ 192.166242] xhci_hcd 0000:11:00.0: USB bus 5 deregistered
you see those "60s" delay above?
re-inserted
Apr 20 12:56:18 vostro kernel: [ 414.651967] pciehp 0000:00:1c.7:pcie04: lnk_status = 7011
Apr 20 12:56:18 vostro kernel: [ 414.651972] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
Apr 20 12:56:18 vostro kernel: [ 414.774447] pci 0000:11:00.0: BAR 0: assigned [mem 0xf6c00000-0xf6c01fff 64bit]
Apr 20 12:56:18 vostro kernel: [ 414.774478] pcieport 0000:00:1c.7: PCI bridge to [bus 11-16]
Apr 20 12:56:18 vostro kernel: [ 414.774493] pcieport 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
Apr 20 12:56:18 vostro kernel: [ 414.774498] pcieport 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff]
Apr 20 12:56:18 vostro kernel: [ 414.774502] pcieport 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
Apr 20 12:56:18 vostro kernel: [ 414.774644] xhci_hcd 0000:11:00.0: enabling device (0100 -> 0102)
Apr 20 12:56:18 vostro kernel: [ 414.774693] xhci_hcd 0000:11:00.0: xHCI Host Controller
Apr 20 12:56:18 vostro kernel: [ 414.774698] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 5
Apr 20 12:56:18 vostro kernel: [ 414.774992] xhci_hcd 0000:11:00.0: irq 19, io mem 0xf6c00000
Apr 20 12:56:18 vostro kernel: [ 414.775300] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
Apr 20 12:56:18 vostro kernel: [ 414.775302] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 20 12:56:18 vostro kernel: [ 414.775303] usb usb5: Product: xHCI Host Controller
Apr 20 12:56:18 vostro kernel: [ 414.775304] usb usb5: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
Apr 20 12:56:18 vostro kernel: [ 414.775305] usb usb5: SerialNumber: 0000:11:00.0
Apr 20 12:56:18 vostro kernel: [ 414.775450] hub 5-0:1.0: USB hub found
Apr 20 12:56:18 vostro kernel: [ 414.775462] hub 5-0:1.0: 2 ports detected
Apr 20 12:56:18 vostro kernel: [ 414.775559] xhci_hcd 0000:11:00.0: xHCI Host Controller
Apr 20 12:56:18 vostro kernel: [ 414.775570] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 6
Apr 20 12:56:18 vostro kernel: [ 414.778228] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
Apr 20 12:56:18 vostro kernel: [ 414.778230] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 20 12:56:18 vostro kernel: [ 414.778231] usb usb6: Product: xHCI Host Controller
Apr 20 12:56:18 vostro kernel: [ 414.778232] usb usb6: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
Apr 20 12:56:18 vostro kernel: [ 414.778234] usb usb6: SerialNumber: 0000:11:00.0
Apr 20 12:56:18 vostro kernel: [ 414.778320] hub 6-0:1.0: USB hub found
Apr 20 12:56:18 vostro kernel: [ 414.778332] hub 6-0:1.0: 2 ports detected
Apr 20 12:56:18 vostro kernel: [ 415.093937] usb 5-1: new high-speed USB device number 2 using xhci_hcd
Apr 20 12:56:18 vostro kernel: [ 415.117398] usb 5-1: New USB device found, idVendor=13fd, idProduct=0550
Apr 20 12:56:18 vostro kernel: [ 415.117409] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Apr 20 12:56:18 vostro kernel: [ 415.117415] usb 5-1: Product: ST9160821A
Apr 20 12:56:18 vostro kernel: [ 415.117420] usb 5-1: Manufacturer: Initio
Apr 20 12:56:18 vostro kernel: [ 415.117425] usb 5-1: SerialNumber: 00101005500011B80
Apr 20 12:56:18 vostro kernel: [ 415.117601] usb 5-1: ep 0x81 - rounding interval to 32768 microframes, ep desc says 0 microframes
Apr 20 12:56:18 vostro kernel: [ 415.117606] usb 5-1: ep 0x2 - rounding interval to 32768 microframes, ep desc says 0 microframes
Apr 20 12:56:18 vostro kernel: [ 415.118444] scsi8 : usb-storage 5-1:1.0
Apr 20 12:56:18 vostro kernel: [ 415.120317] generic-usb 0003:13FD:0550.0004: hiddev0,hidraw2: USB HID v1.10 Device [Initio ST9160821A ] on usb-0000:11:00.0-1/input1
Apr 20 12:56:19 vostro kernel: [ 416.113367] scsi 8:0:0:0: Direct-Access Initio ST9160821A 3.12 PQ: 0 ANSI: 0
Apr 20 12:56:19 vostro kernel: [ 416.113528] sd 8:0:0:0: Attached scsi generic sg3 type 0
Apr 20 12:56:19 vostro kernel: [ 416.113736] sd 8:0:0:0: [sdc] 312581808 512-byte logical blocks: (160 GB/149 GiB)
Apr 20 12:56:19 vostro kernel: [ 416.114340] sd 8:0:0:0: [sdc] Write Protect is off
Apr 20 12:56:20 vostro kernel: [ 416.309674] sdc: sdc1 sdc2
Apr 20 12:56:20 vostro kernel: [ 416.311327] sd 8:0:0:0: [sdc] Attached SCSI disk
removed
Apr 20 12:57:24 vostro kernel: [ 481.131834] pciehp 0000:00:1c.7:pcie04: lnk_status = 5011
Apr 20 12:57:24 vostro kernel: [ 481.131838] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
Apr 20 12:57:24 vostro kernel: [ 481.135724] xhci_hcd 0000:11:00.0: remove, state 4
Apr 20 12:57:24 vostro kernel: [ 481.135731] usb usb6: USB disconnect, device number 1
Apr 20 12:57:24 vostro kernel: [ 481.135884] xhci_hcd 0000:11:00.0: Host not halted after 16000 microseconds.
Apr 20 12:57:24 vostro kernel: [ 481.135888] xhci_hcd 0000:11:00.0: USB bus 6 deregistered
Apr 20 12:57:24 vostro kernel: [ 481.135893] xhci_hcd 0000:11:00.0: remove, state 1
Apr 20 12:57:24 vostro kernel: [ 481.135898] usb usb5: USB disconnect, device number 1
Apr 20 12:57:24 vostro kernel: [ 481.135900] usb 5-1: USB disconnect, device number 2
Apr 20 12:58:14 vostro kernel: [ 531.061380] xhci_hcd 0000:11:00.0: Timeout while waiting for configure endpoint command
Apr 20 12:58:14 vostro kernel: [ 531.061659] xhci_hcd 0000:11:00.0: Host not halted after 16000 microseconds.
Apr 20 12:58:14 vostro kernel: [ 531.061761] xhci_hcd 0000:11:00.0: USB bus 5 deregistered
you see those "60s" delay above?
Next tests without USB device attached to the express card:
re-inserting the card
Apr 20 12:59:16 vostro kernel: [ 592.704673] pciehp 0000:00:1c.7:pcie04: lnk_status = 7011
Apr 20 12:59:16 vostro kernel: [ 592.704685] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
Apr 20 12:59:16 vostro kernel: [ 592.829402] pci 0000:11:00.0: BAR 0: assigned [mem 0xf6c00000-0xf6c01fff 64bit]
Apr 20 12:59:16 vostro kernel: [ 592.829447] pcieport 0000:00:1c.7: PCI bridge to [bus 11-16]
Apr 20 12:59:16 vostro kernel: [ 592.829450] pcieport 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
Apr 20 12:59:16 vostro kernel: [ 592.829455] pcieport 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff]
Apr 20 12:59:16 vostro kernel: [ 592.829459] pcieport 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
Apr 20 12:59:16 vostro kernel: [ 592.829593] xhci_hcd 0000:11:00.0: enabling device (0100 -> 0102)
Apr 20 12:59:16 vostro kernel: [ 592.829671] xhci_hcd 0000:11:00.0: xHCI Host Controller
Apr 20 12:59:16 vostro kernel: [ 592.829676] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 5
Apr 20 12:59:16 vostro kernel: [ 592.829973] xhci_hcd 0000:11:00.0: irq 19, io mem 0xf6c00000
Apr 20 12:59:16 vostro kernel: [ 592.830258] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
Apr 20 12:59:16 vostro kernel: [ 592.830260] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 20 12:59:16 vostro kernel: [ 592.830261] usb usb5: Product: xHCI Host Controller
Apr 20 12:59:16 vostro kernel: [ 592.830262] usb usb5: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
Apr 20 12:59:16 vostro kernel: [ 592.830263] usb usb5: SerialNumber: 0000:11:00.0
Apr 20 12:59:16 vostro kernel: [ 592.830421] hub 5-0:1.0: USB hub found
Apr 20 12:59:16 vostro kernel: [ 592.830434] hub 5-0:1.0: 2 ports detected
Apr 20 12:59:16 vostro kernel: [ 592.830495] xhci_hcd 0000:11:00.0: xHCI Host Controller
Apr 20 12:59:16 vostro kernel: [ 592.830498] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 6
Apr 20 12:59:16 vostro kernel: [ 592.833211] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
Apr 20 12:59:16 vostro kernel: [ 592.833214] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 20 12:59:16 vostro kernel: [ 592.833216] usb usb6: Product: xHCI Host Controller
Apr 20 12:59:16 vostro kernel: [ 592.833217] usb usb6: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
Apr 20 12:59:16 vostro kernel: [ 592.833219] usb usb6: SerialNumber: 0000:11:00.0
Apr 20 12:59:16 vostro kernel: [ 592.833345] hub 6-0:1.0: USB hub found
Apr 20 12:59:16 vostro kernel: [ 592.833363] hub 6-0:1.0: 2 ports detected
re-moving the card
nothing happened
re-inserting the card
Apr 20 13:03:06 vostro kernel: [ 725.782822] pciehp 0000:00:1c.7:pcie04: lnk_status = 5011
Apr 20 13:03:06 vostro kernel: [ 725.782826] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
Apr 20 13:03:06 vostro kernel: [ 725.791556] xhci_hcd 0000:11:00.0: remove, state 4
Apr 20 13:03:06 vostro kernel: [ 725.791562] usb usb6: USB disconnect, device number 1
Apr 20 13:03:06 vostro kernel: [ 725.791821] xhci_hcd 0000:11:00.0: Host not halted after 16000 microseconds.
Apr 20 13:03:06 vostro kernel: [ 725.791825] xhci_hcd 0000:11:00.0: USB bus 6 deregistered
Apr 20 13:03:06 vostro kernel: [ 725.791830] xhci_hcd 0000:11:00.0: remove, state 4
Apr 20 13:03:06 vostro kernel: [ 725.791834] usb usb5: USB disconnect, device number 1
Apr 20 13:03:06 vostro kernel: [ 725.792107] xhci_hcd 0000:11:00.0: Host not halted after 16000 microseconds.
Apr 20 13:03:06 vostro kernel: [ 725.792188] xhci_hcd 0000:11:00.0: USB bus 5 deregistered
Apr 20 13:03:06 vostro kernel: [ 725.799098] pciehp 0000:00:1c.7:pcie04: lnk_status = 7011
Apr 20 13:03:06 vostro kernel: [ 725.799113] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
Apr 20 13:03:06 vostro kernel: [ 725.921259] pci 0000:11:00.0: BAR 0: assigned [mem 0xf6c00000-0xf6c01fff 64bit]
Apr 20 13:03:06 vostro kernel: [ 725.921303] pcieport 0000:00:1c.7: PCI bridge to [bus 11-16]
Apr 20 13:03:06 vostro kernel: [ 725.921306] pcieport 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
Apr 20 13:03:06 vostro kernel: [ 725.921311] pcieport 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff]
Apr 20 13:03:06 vostro kernel: [ 725.921315] pcieport 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
Apr 20 13:03:06 vostro kernel: [ 725.921457] xhci_hcd 0000:11:00.0: enabling device (0100 -> 0102)
Apr 20 13:03:06 vostro kernel: [ 725.921505] xhci_hcd 0000:11:00.0: xHCI Host Controller
Apr 20 13:03:06 vostro kernel: [ 725.921510] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 5
Apr 20 13:03:06 vostro kernel: [ 725.921808] xhci_hcd 0000:11:00.0: irq 19, io mem 0xf6c00000
Apr 20 13:03:06 vostro kernel: [ 725.922079] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
Apr 20 13:03:06 vostro kernel: [ 725.922081] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 20 13:03:06 vostro kernel: [ 725.922082] usb usb5: Product: xHCI Host Controller
Apr 20 13:03:06 vostro kernel: [ 725.922083] usb usb5: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
Apr 20 13:03:06 vostro kernel: [ 725.922084] usb usb5: SerialNumber: 0000:11:00.0
Apr 20 13:03:06 vostro kernel: [ 725.922233] hub 5-0:1.0: USB hub found
Apr 20 13:03:06 vostro kernel: [ 725.922244] hub 5-0:1.0: 2 ports detected
Apr 20 13:03:06 vostro kernel: [ 725.922310] xhci_hcd 0000:11:00.0: xHCI Host Controller
Apr 20 13:03:06 vostro kernel: [ 725.922312] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 6
Apr 20 13:03:06 vostro kernel: [ 725.925042] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
Apr 20 13:03:06 vostro kernel: [ 725.925045] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 20 13:03:06 vostro kernel: [ 725.925047] usb usb6: Product: xHCI Host Controller
Apr 20 13:03:06 vostro kernel: [ 725.925049] usb usb6: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
Apr 20 13:03:06 vostro kernel: [ 725.925051] usb usb6: SerialNumber: 0000:11:00.0
Apr 20 13:03:06 vostro kernel: [ 725.925203] hub 6-0:1.0: USB hub found
Apr 20 13:03:06 vostro kernel: [ 725.925222] hub 6-0:1.0: 2 ports detected
removing the card
nothing happened
re-inserting the card
Apr 20 13:06:35 vostro kernel: [ 935.028151] pciehp 0000:00:1c.7:pcie04: lnk_status = 5011
Apr 20 13:06:35 vostro kernel: [ 935.028156] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
Apr 20 13:06:35 vostro kernel: [ 935.030143] xhci_hcd 0000:11:00.0: remove, state 4
Apr 20 13:06:35 vostro kernel: [ 935.030148] usb usb6: USB disconnect, device number 1
Apr 20 13:06:35 vostro kernel: [ 935.030299] xhci_hcd 0000:11:00.0: Host not halted after 16000 microseconds.
Apr 20 13:06:35 vostro kernel: [ 935.030304] xhci_hcd 0000:11:00.0: USB bus 6 deregistered
Apr 20 13:06:35 vostro kernel: [ 935.030310] xhci_hcd 0000:11:00.0: remove, state 4
Apr 20 13:06:35 vostro kernel: [ 935.030315] usb usb5: USB disconnect, device number 1
Apr 20 13:06:35 vostro kernel: [ 935.030410] xhci_hcd 0000:11:00.0: Host not halted after 16000 microseconds.
Apr 20 13:06:35 vostro kernel: [ 935.030498] xhci_hcd 0000:11:00.0: USB bus 5 deregistered
Apr 20 13:06:35 vostro kernel: [ 935.043622] pciehp 0000:00:1c.7:pcie04: lnk_status = 7011
Apr 20 13:06:35 vostro kernel: [ 935.043627] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
Apr 20 13:06:35 vostro kernel: [ 935.169809] pci 0000:11:00.0: BAR 0: assigned [mem 0xf6c00000-0xf6c01fff 64bit]
Apr 20 13:06:35 vostro kernel: [ 935.169842] pcieport 0000:00:1c.7: PCI bridge to [bus 11-16]
Apr 20 13:06:35 vostro kernel: [ 935.169855] pcieport 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
Apr 20 13:06:35 vostro kernel: [ 935.169860] pcieport 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff]
Apr 20 13:06:35 vostro kernel: [ 935.169864] pcieport 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
Apr 20 13:06:35 vostro kernel: [ 935.170001] xhci_hcd 0000:11:00.0: enabling device (0100 -> 0102)
Apr 20 13:06:35 vostro kernel: [ 935.170054] xhci_hcd 0000:11:00.0: xHCI Host Controller
Apr 20 13:06:35 vostro kernel: [ 935.170059] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 5
Apr 20 13:06:35 vostro kernel: [ 935.170349] xhci_hcd 0000:11:00.0: irq 19, io mem 0xf6c00000
Apr 20 13:06:35 vostro kernel: [ 935.170652] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
Apr 20 13:06:35 vostro kernel: [ 935.170654] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 20 13:06:35 vostro kernel: [ 935.170656] usb usb5: Product: xHCI Host Controller
Apr 20 13:06:35 vostro kernel: [ 935.170657] usb usb5: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
Apr 20 13:06:35 vostro kernel: [ 935.170658] usb usb5: SerialNumber: 0000:11:00.0
Apr 20 13:06:35 vostro kernel: [ 935.170742] hub 5-0:1.0: USB hub found
Apr 20 13:06:35 vostro kernel: [ 935.170753] hub 5-0:1.0: 2 ports detected
Apr 20 13:06:35 vostro kernel: [ 935.170855] xhci_hcd 0000:11:00.0: xHCI Host Controller
Apr 20 13:06:35 vostro kernel: [ 935.170860] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 6
Apr 20 13:06:35 vostro kernel: [ 935.173587] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
Apr 20 13:06:35 vostro kernel: [ 935.173589] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 20 13:06:35 vostro kernel: [ 935.173591] usb usb6: Product: xHCI Host Controller
Apr 20 13:06:35 vostro kernel: [ 935.173592] usb usb6: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
Apr 20 13:06:35 vostro kernel: [ 935.173593] usb usb6: SerialNumber: 0000:11:00.0
Apr 20 13:06:35 vostro kernel: [ 935.173678] hub 6-0:1.0: USB hub found
Apr 20 13:06:35 vostro kernel: [ 935.173689] hub 6-0:1.0: 2 ports detected
re-moving the card
Complete dmesg is attached. OK, the "60sec" delay is when xhci_hcd gives away its attempts.
I am not knowlegeable of the kernel at all but it is my impression that because of the
card presence detection there is no way to prevent that. But, if I get it right, now when I
pluging the card+USB disk in it into the computer before those "60sec" it gets detected,
so my problem is gone (xhci cancels the timeout because a "new card" was popped in with a "new"
device.
So, although I am now not sure whether I need your last patch, for the practical purpose that
I want to plugin a new card with a device into my computer, it works now. (added Sarah Sharp
into CC: just to make her aware of this scenario, no problem with xhci_hcd in my eyes)
;)
Martin
[-- Attachment #2: dmesg.txt --]
[-- Type: text/plain, Size: 86880 bytes --]
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.4.0-rc3-default (root@vostro) (gcc version 4.5.3 (Gentoo 4.5.3-r2 p1.1, pie-0.4.7) ) #8 SMP Fri Apr 20 12:44:48 MEST 2012
[ 0.000000] Command line: root=/dev/sda5 pciehp.pciehp_debug=1
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d400 (usable)
[ 0.000000] BIOS-e820: 000000000009d400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
[ 0.000000] BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
[ 0.000000] BIOS-e820: 0000000020200000 - 0000000040000000 (usable)
[ 0.000000] BIOS-e820: 0000000040000000 - 0000000040200000 (reserved)
[ 0.000000] BIOS-e820: 0000000040200000 - 00000000da4e5000 (usable)
[ 0.000000] BIOS-e820: 00000000da4e5000 - 00000000da528000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000da528000 - 00000000da793000 (usable)
[ 0.000000] BIOS-e820: 00000000da793000 - 00000000da967000 (reserved)
[ 0.000000] BIOS-e820: 00000000da967000 - 00000000daa89000 (usable)
[ 0.000000] BIOS-e820: 00000000daa89000 - 00000000dad68000 (reserved)
[ 0.000000] BIOS-e820: 00000000dad68000 - 00000000dafe8000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000dafe8000 - 00000000db000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000db800000 - 00000000dfa00000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed04000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000041fe00000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.6 present.
[ 0.000000] DMI: Dell Inc. Vostro 3550/0JGC48, BIOS A09 09/30/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x41fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask C00000000 write-back
[ 0.000000] 1 base 400000000 mask FE0000000 write-back
[ 0.000000] 2 base 0DB800000 mask FFF800000 uncachable
[ 0.000000] 3 base 0DC000000 mask FFC000000 uncachable
[ 0.000000] 4 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 5 base 41FE00000 mask FFFE00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000db800000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xdaa89 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000daa89000
[ 0.000000] 0000000000 - 00daa00000 page 2M
[ 0.000000] 00daa00000 - 00daa89000 page 4k
[ 0.000000] kernel direct mapping tables up to daa89000 @ 1fffa000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-000000041fe00000
[ 0.000000] 0100000000 - 041fe00000 page 2M
[ 0.000000] kernel direct mapping tables up to 41fe00000 @ daa77000-daa89000
[ 0.000000] ACPI: RSDP 00000000000f0410 00024 (v02 DELL)
[ 0.000000] ACPI: XSDT 00000000dafe8078 00074 (v01 DELL WN09 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 00000000daff1d08 000F4 (v04 DELL WN09 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 00000000dafe8180 09B85 (v02 DELL WN09 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000dafe3f80 00040
[ 0.000000] ACPI: APIC 00000000daff1e00 00072 (v03 DELL WN09 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 00000000daff1e78 0003C (v01 DELL WN09 01072009 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000daff1eb8 004B0 (v01 TrmRef PtidDevc 00001000 INTL 20091112)
[ 0.000000] ACPI: SLIC 00000000daff2368 00176 (v01 DELL WN09 01072009 AMI 00010013)
[ 0.000000] ACPI: HPET 00000000daff24e0 00038 (v01 DELL WN09 01072009 AMI. 00000004)
[ 0.000000] ACPI: SSDT 00000000daff2518 00846 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 00000000daff2d60 00996 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: DMAR 00000000daff36f8 000E8 (v01 INTEL SNB 00000001 INTL 00000001)
[ 0.000000] ACPI: OSFR 00000000daff37e0 00086 (v01 DELL M08 07DB091E ASL 00000061)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000041fe00000
[ 0.000000] Initmem setup node 0 0000000000000000-000000041fe00000
[ 0.000000] NODE_DATA [000000041fdfc000 - 000000041fdfffff]
[ 0.000000] [ffffea0000000000-ffffea000e7fffff] PMD -> [ffff88040f400000-ffff88041d5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0041fe00
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x00020000
[ 0.000000] 0: 0x00020200 -> 0x00040000
[ 0.000000] 0: 0x00040200 -> 0x000da4e5
[ 0.000000] 0: 0x000da528 -> 0x000da793
[ 0.000000] 0: 0x000da967 -> 0x000daa89
[ 0.000000] 0: 0x00100000 -> 0x0041fe00
[ 0.000000] On node 0 totalpages: 4170239
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3920 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 875690 pages, LIFO batch:31
[ 0.000000] Normal zone: 44793 pages used for memmap
[ 0.000000] Normal zone: 3231495 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[ 0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000
[ 0.000000] PM: Registered nosave memory: 00000000da4e5000 - 00000000da528000
[ 0.000000] PM: Registered nosave memory: 00000000da793000 - 00000000da967000
[ 0.000000] PM: Registered nosave memory: 00000000daa89000 - 00000000dad68000
[ 0.000000] PM: Registered nosave memory: 00000000dad68000 - 00000000dafe8000
[ 0.000000] PM: Registered nosave memory: 00000000dafe8000 - 00000000db000000
[ 0.000000] PM: Registered nosave memory: 00000000db000000 - 00000000db800000
[ 0.000000] PM: Registered nosave memory: 00000000db800000 - 00000000dfa00000
[ 0.000000] PM: Registered nosave memory: 00000000dfa00000 - 00000000f8000000
[ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000
[ 0.000000] PM: Registered nosave memory: 00000000fed04000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at dfa00000 (gap: dfa00000:18600000)
[ 0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 25 pages/cpu @ffff88041fa00000 s72448 r8192 d21760 u524288
[ 0.000000] pcpu-alloc: s72448 r8192 d21760 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4111105
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/sda5 pciehp.pciehp_debug=1
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 16372132k/17299456k available (5719k kernel code, 618500k absent, 308824k reserved, 3607k data, 544k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:4352 nr_irqs:712 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.010000] Detected 2793.628 MHz processor.
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5587.25 BogoMIPS (lpj=27936280)
[ 0.000191] pid_max: default: 32768 minimum: 301
[ 0.001165] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.004173] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.005542] Mount-cache hash table entries: 256
[ 0.005805] CPU: Physical Processor ID: 0
[ 0.005898] CPU: Processor Core ID: 0
[ 0.005992] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.005993] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.006185] mce: CPU supports 7 MCE banks
[ 0.006285] CPU0: Thermal monitoring enabled (TM1)
[ 0.006383] using mwait in idle threads.
[ 0.006532] ACPI: Core revision 20120320
[ 0.027580] DMAR: Host address width 36
[ 0.027674] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.027774] IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ 0.027920] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.028018] IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.028164] DMAR: RMRR base: 0x000000dad53000 end: 0x000000dad61fff
[ 0.028260] DMAR: RMRR base: 0x000000db800000 end: 0x000000df9fffff
[ 0.028426] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.028521] HPET id 0 under DRHD base 0xfed91000
[ 0.028615] HPET id 0 under DRHD base 0xfed91000
[ 0.028709] HPET id 0 under DRHD base 0xfed91000
[ 0.028802] HPET id 0 under DRHD base 0xfed91000
[ 0.028896] HPET id 0 under DRHD base 0xfed91000
[ 0.028988] HPET id 0 under DRHD base 0xfed91000
[ 0.029082] HPET id 0 under DRHD base 0xfed91000
[ 0.029175] HPET id 0 under DRHD base 0xfed91000
[ 0.029429] Enabled IRQ remapping in x2apic mode
[ 0.029522] Enabling x2apic
[ 0.029612] Enabled x2apic
[ 0.029705] Switched APIC routing to cluster x2apic.
[ 0.030236] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.130186] CPU0: Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz stepping 07
[ 0.246466] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
[ 0.246770] PEBS disabled due to CPU errata.
[ 0.246862] ... version: 3
[ 0.246954] ... bit width: 48
[ 0.247046] ... generic registers: 4
[ 0.247138] ... value mask: 0000ffffffffffff
[ 0.247232] ... max period: 000000007fffffff
[ 0.247326] ... fixed-purpose events: 3
[ 0.247418] ... event mask: 000000070000000f
[ 0.247598] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.249088] Booting Node 0, Processors #1
[ 0.262289] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.262549] #2
[ 0.275704] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.275968] #3 Ok.
[ 0.289168] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.289287] Brought up 4 CPUs
[ 0.289379] Total of 4 processors activated (22349.02 BogoMIPS).
[ 0.292410] devtmpfs: initialized
[ 0.292657] PM: Registering ACPI NVS region [mem 0xda4e5000-0xda527fff] (274432 bytes)
[ 0.292813] PM: Registering ACPI NVS region [mem 0xdad68000-0xdafe7fff] (2621440 bytes)
[ 0.293082] xor: automatically using best checksumming function: generic_sse
[ 0.336332] generic_sse: 12455.200 MB/sec
[ 0.336426] xor: using function: generic_sse (12455.200 MB/sec)
[ 0.336653] dummy:
[ 0.336812] NET: Registered protocol family 16
[ 0.337199] ACPI: bus type pci registered
[ 0.337387] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.337532] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.344675] PCI: Using configuration type 1 for base access
[ 0.350738] bio: create slab <bio-0> at 0
[ 0.516082] raid6: int64x1 2921 MB/s
[ 0.685821] raid6: int64x2 3002 MB/s
[ 0.855573] raid6: int64x4 2722 MB/s
[ 1.025332] raid6: int64x8 1729 MB/s
[ 1.195049] raid6: sse2x1 7520 MB/s
[ 1.364799] raid6: sse2x2 9273 MB/s
[ 1.534546] raid6: sse2x4 10552 MB/s
[ 1.534638] raid6: using algorithm sse2x4 (10552 MB/s)
[ 1.534773] ACPI: Added _OSI(Module Device)
[ 1.534868] ACPI: Added _OSI(Processor Device)
[ 1.534964] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 1.535059] ACPI: Added _OSI(Processor Aggregator Device)
[ 1.536371] ACPI: EC: Look up EC in DSDT
[ 1.537686] ACPI: Executed 1 blocks of module-level executable AML code
[ 1.542153] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 1.546643] ACPI: SSDT 00000000dad51698 0064F (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 1.547183] ACPI: Dynamic OEM Table Load:
[ 1.547352] ACPI: SSDT (null) 0064F (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 1.547934] ACPI: SSDT 00000000dad52a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 1.548513] ACPI: Dynamic OEM Table Load:
[ 1.548683] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 1.549028] ACPI: SSDT 00000000dad50d98 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 1.549557] ACPI: Dynamic OEM Table Load:
[ 1.549727] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 1.550515] ACPI: Interpreter enabled
[ 1.550609] ACPI: (supports S0 S1 S3 S4 S5)
[ 1.550920] ACPI: Using IOAPIC for interrupt routing
[ 1.575330] ACPI: No dock devices found.
[ 1.575424] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 1.575898] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 1.576432] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 1.576529] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 1.576625] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 1.576769] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[ 1.576915] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 1.577060] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 1.577205] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
[ 1.577351] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
[ 1.577496] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
[ 1.577641] pci_root PNP0A08:00: host bridge window [mem 0xdfa00000-0xfeafffff]
[ 1.577785] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
[ 1.577973] PCI host bridge to bus 0000:00
[ 1.578067] pci_bus 0000:00: busn_res: [bus 00-3e] for root bus
[ 1.578069] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 1.578163] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 1.578259] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 1.578355] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 1.578452] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 1.578547] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 1.578644] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 1.578742] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 1.578839] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 1.578936] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 1.579034] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff]
[ 1.579130] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[ 1.579233] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[ 1.579267] pci 0000:00:02.0: [8086:0126] type 00 class 0x030000
[ 1.579276] pci 0000:00:02.0: reg 10: [mem 0xf6800000-0xf6bfffff 64bit]
[ 1.579282] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 1.579286] pci 0000:00:02.0: reg 20: [io 0xf000-0xf03f]
[ 1.579336] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 1.579358] pci 0000:00:16.0: reg 10: [mem 0xf7f0a000-0xf7f0a00f 64bit]
[ 1.579432] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 1.579466] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 1.579486] pci 0000:00:1a.0: reg 10: [mem 0xf7f08000-0xf7f083ff]
[ 1.579574] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 1.579600] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 1.579615] pci 0000:00:1b.0: reg 10: [mem 0xf7f00000-0xf7f03fff 64bit]
[ 1.579681] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.579706] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 1.579783] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.579809] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[ 1.579886] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 1.579913] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[ 1.579989] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 1.580019] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[ 1.580150] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 1.580191] pci 0000:00:1c.7: [8086:1c1e] type 01 class 0x060400
[ 1.580325] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[ 1.580365] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 1.580385] pci 0000:00:1d.0: reg 10: [mem 0xf7f07000-0xf7f073ff]
[ 1.580473] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 1.580499] pci 0000:00:1f.0: [8086:1c4b] type 00 class 0x060100
[ 1.580622] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[ 1.580639] pci 0000:00:1f.2: reg 10: [io 0xf0b0-0xf0b7]
[ 1.580647] pci 0000:00:1f.2: reg 14: [io 0xf0a0-0xf0a3]
[ 1.580655] pci 0000:00:1f.2: reg 18: [io 0xf090-0xf097]
[ 1.580663] pci 0000:00:1f.2: reg 1c: [io 0xf080-0xf083]
[ 1.580670] pci 0000:00:1f.2: reg 20: [io 0xf060-0xf07f]
[ 1.580678] pci 0000:00:1f.2: reg 24: [mem 0xf7f06000-0xf7f067ff]
[ 1.580721] pci 0000:00:1f.2: PME# supported from D3hot
[ 1.580740] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 1.580755] pci 0000:00:1f.3: reg 10: [mem 0xf7f05000-0xf7f050ff 64bit]
[ 1.580775] pci 0000:00:1f.3: reg 20: [io 0xf040-0xf05f]
[ 1.580805] pci 0000:00:1c.0: check if busn 03-04 is in busn_res: [bus 00-3e]
[ 1.580852] pci_bus 0000:03: busn_res: [bus 03-04] is inserted under [bus 00-3e]
[ 1.580856] pci 0000:00:1c.0: PCI bridge to [bus 03-04]
[ 1.580962] pci 0000:00:1c.1: check if busn 05-06 is in busn_res: [bus 00-3e]
[ 1.581007] pci_bus 0000:05: busn_res: [bus 05-06] is inserted under [bus 00-3e]
[ 1.581033] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
[ 1.581053] pci 0000:05:00.0: reg 10: [io 0xe000-0xe0ff]
[ 1.581087] pci 0000:05:00.0: reg 18: [mem 0xf1104000-0xf1104fff 64bit pref]
[ 1.581109] pci 0000:05:00.0: reg 20: [mem 0xf1100000-0xf1103fff 64bit pref]
[ 1.581200] pci 0000:05:00.0: supports D1 D2
[ 1.581202] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.600310] pci 0000:00:1c.1: PCI bridge to [bus 05-06]
[ 1.600449] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
[ 1.600458] pci 0000:00:1c.1: bridge window [mem 0xf1100000-0xf11fffff 64bit pref]
[ 1.600462] pci 0000:00:1c.3: check if busn 09-0a is in busn_res: [bus 00-3e]
[ 1.600506] pci_bus 0000:09: busn_res: [bus 09-0a] is inserted under [bus 00-3e]
[ 1.600661] pci 0000:09:00.0: [8086:008a] type 00 class 0x028000
[ 1.600790] pci 0000:09:00.0: reg 10: [mem 0xf7e00000-0xf7e01fff 64bit]
[ 1.601356] pci 0000:09:00.0: PME# supported from D0 D3hot D3cold
[ 1.620394] pci 0000:00:1c.3: PCI bridge to [bus 09-0a]
[ 1.620492] pci 0000:00:1c.3: bridge window [mem 0xf7e00000-0xf7efffff]
[ 1.620502] pci 0000:00:1c.4: check if busn 0b-0c is in busn_res: [bus 00-3e]
[ 1.620570] pci_bus 0000:0b: busn_res: [bus 0b-0c] is inserted under [bus 00-3e]
[ 1.620597] pci 0000:0b:00.0: [104c:8241] type 00 class 0x0c0330
[ 1.620622] pci 0000:0b:00.0: reg 10: [mem 0xf7d00000-0xf7d0ffff 64bit]
[ 1.620642] pci 0000:0b:00.0: reg 18: [mem 0xf7d10000-0xf7d11fff 64bit]
[ 1.620746] pci 0000:0b:00.0: supports D1 D2
[ 1.620747] pci 0000:0b:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.640248] pci 0000:00:1c.4: PCI bridge to [bus 0b-0c]
[ 1.640392] pci 0000:00:1c.4: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 1.640404] pci 0000:00:1c.7: check if busn 11-16 is in busn_res: [bus 00-3e]
[ 1.640469] pci_bus 0000:11: busn_res: [bus 11-16] is inserted under [bus 00-3e]
[ 1.640473] pci 0000:00:1c.7: PCI bridge to [bus 11-16]
[ 1.640571] pci 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
[ 1.640575] pci 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff]
[ 1.640584] pci 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
[ 1.640636] pci 0000:00:1c.0: PCI bridge to [bus 03-04]
[ 1.640746] pci 0000:00:1c.1: PCI bridge to [bus 05-06]
[ 1.640842] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
[ 1.640850] pci 0000:00:1c.1: bridge window [mem 0xf1100000-0xf11fffff 64bit pref]
[ 1.640882] pci 0000:00:1c.3: PCI bridge to [bus 09-0a]
[ 1.640980] pci 0000:00:1c.3: bridge window [mem 0xf7e00000-0xf7efffff]
[ 1.640998] pci 0000:00:1c.4: PCI bridge to [bus 0b-0c]
[ 1.641099] pci 0000:00:1c.4: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 1.641116] pci 0000:00:1c.7: PCI bridge to [bus 11-16]
[ 1.641214] pci 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
[ 1.641219] pci 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff]
[ 1.641227] pci 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
[ 1.641233] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.641403] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 1.641440] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 1.641479] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 1.641515] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[ 1.641567] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP08._PRT]
[ 1.641696] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 1.642002] pci0000:00: ACPI _OSC control (0x19) granted
[ 1.646682] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 1.647248] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 1.647808] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
[ 1.648369] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 1.648929] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.649618] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.650308] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 1.650870] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 1.651425] acpi root: \_SB_.PCI0 notify handler installed
[ 1.651476] Found 1 acpi root devices
[ 1.651561] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.651713] vgaarb: loaded
[ 1.651803] vgaarb: bridge control possible 0000:00:02.0
[ 1.652033] SCSI subsystem initialized
[ 1.652191] libata version 3.00 loaded.
[ 1.652292] usbcore: registered new interface driver usbfs
[ 1.652407] usbcore: registered new interface driver hub
[ 1.652528] usbcore: registered new device driver usb
[ 1.652678] Linux media interface: v0.10
[ 1.652791] Linux video capture interface: v2.00
[ 1.653244] wmi: Mapper loaded
[ 1.653379] Advanced Linux Sound Architecture Driver Version 1.0.25.
[ 1.653475] PCI: Using ACPI for IRQ routing
[ 1.655467] PCI: pci_cache_line_size set to 64 bytes
[ 1.655573] reserve RAM buffer: 000000000009d400 - 000000000009ffff
[ 1.655576] reserve RAM buffer: 00000000da4e5000 - 00000000dbffffff
[ 1.655579] reserve RAM buffer: 00000000da793000 - 00000000dbffffff
[ 1.655582] reserve RAM buffer: 00000000daa89000 - 00000000dbffffff
[ 1.655584] reserve RAM buffer: 000000041fe00000 - 000000041fffffff
[ 1.655720] Bluetooth: Core ver 2.16
[ 1.655832] NET: Registered protocol family 31
[ 1.655926] Bluetooth: HCI device and connection manager initialized
[ 1.656023] Bluetooth: HCI socket layer initialized
[ 1.656117] Bluetooth: L2CAP socket layer initialized
[ 1.656213] Bluetooth: SCO socket layer initialized
[ 1.656369] cfg80211: Calling CRDA to update world regulatory domain
[ 1.656572] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 1.657016] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 1.659121] Switching to clocksource hpet
[ 1.659291] pnp: PnP ACPI init
[ 1.659390] ACPI: bus type pnp registered
[ 1.659725] pnp 00:00: [bus 00-3e]
[ 1.659727] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 1.659728] pnp 00:00: [io 0x0cf8-0x0cff]
[ 1.659730] pnp 00:00: [io 0x0d00-0xffff window]
[ 1.659731] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 1.659733] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 1.659735] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 1.659736] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 1.659738] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 1.659739] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 1.659741] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 1.659742] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 1.659744] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 1.659745] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 1.659747] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 1.659748] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 1.659750] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 1.659751] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 1.659753] pnp 00:00: [mem 0xdfa00000-0xfeafffff window]
[ 1.659755] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 1.659823] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 1.659834] pnp 00:01: [io 0x0000-0x001f]
[ 1.659836] pnp 00:01: [io 0x0081-0x0091]
[ 1.659837] pnp 00:01: [io 0x0093-0x009f]
[ 1.659838] pnp 00:01: [io 0x00c0-0x00df]
[ 1.659840] pnp 00:01: [dma 4]
[ 1.659880] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 1.659888] pnp 00:02: [mem 0xff000000-0xffffffff]
[ 1.659925] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 1.659998] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 1.660040] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 1.660051] pnp 00:04: [io 0x002e-0x002f]
[ 1.660052] pnp 00:04: [io 0x004e-0x004f]
[ 1.660054] pnp 00:04: [io 0x0061]
[ 1.660055] pnp 00:04: [io 0x0063]
[ 1.660056] pnp 00:04: [io 0x0065]
[ 1.660058] pnp 00:04: [io 0x0067]
[ 1.660059] pnp 00:04: [io 0x0070]
[ 1.660060] pnp 00:04: [io 0x0080]
[ 1.660061] pnp 00:04: [io 0x0092]
[ 1.660062] pnp 00:04: [io 0x00b2-0x00b3]
[ 1.660064] pnp 00:04: [io 0x0680-0x069f]
[ 1.660065] pnp 00:04: [io 0x1000-0x100f]
[ 1.660066] pnp 00:04: [io 0xffff]
[ 1.660068] pnp 00:04: [io 0xffff]
[ 1.660069] pnp 00:04: [io 0x0400-0x0453]
[ 1.660070] pnp 00:04: [io 0x0458-0x047f]
[ 1.660071] pnp 00:04: [io 0x0500-0x057f]
[ 1.660073] pnp 00:04: [io 0x164e-0x164f]
[ 1.660128] system 00:04: [io 0x0680-0x069f] has been reserved
[ 1.660228] system 00:04: [io 0x1000-0x100f] has been reserved
[ 1.660324] system 00:04: [io 0xffff] has been reserved
[ 1.660419] system 00:04: [io 0xffff] has been reserved
[ 1.660514] system 00:04: [io 0x0400-0x0453] has been reserved
[ 1.660611] system 00:04: [io 0x0458-0x047f] has been reserved
[ 1.660707] system 00:04: [io 0x0500-0x057f] has been reserved
[ 1.660802] system 00:04: [io 0x164e-0x164f] has been reserved
[ 1.660898] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.660906] pnp 00:05: [io 0x0070-0x0077]
[ 1.660917] pnp 00:05: [irq 8]
[ 1.660960] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.660986] pnp 00:06: [io 0x0454-0x0457]
[ 1.661037] system 00:06: [io 0x0454-0x0457] has been reserved
[ 1.661134] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 1.661142] pnp 00:07: [io 0x00f0-0x00ff]
[ 1.661148] pnp 00:07: [irq 13]
[ 1.661190] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 1.661206] pnp 00:08: [io 0x0010-0x001f]
[ 1.661207] pnp 00:08: [io 0x0022-0x003f]
[ 1.661209] pnp 00:08: [io 0x0044-0x005f]
[ 1.661210] pnp 00:08: [io 0x0068-0x006f]
[ 1.661211] pnp 00:08: [io 0x0072-0x007f]
[ 1.661213] pnp 00:08: [io 0x0080]
[ 1.661214] pnp 00:08: [io 0x0084-0x0086]
[ 1.661216] pnp 00:08: [io 0x0088]
[ 1.661217] pnp 00:08: [io 0x008c-0x008e]
[ 1.661218] pnp 00:08: [io 0x0090-0x009f]
[ 1.661220] pnp 00:08: [io 0x00a2-0x00bf]
[ 1.661221] pnp 00:08: [io 0x00e0-0x00ef]
[ 1.661222] pnp 00:08: [io 0x04d0-0x04d1]
[ 1.661224] pnp 00:08: [mem 0xfe800000-0xfe802fff]
[ 1.661280] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 1.661376] system 00:08: [mem 0xfe800000-0xfe802fff] has been reserved
[ 1.661473] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.661491] pnp 00:09: [irq 12]
[ 1.661534] pnp 00:09: Plug and Play ACPI device, IDs DLL04b3 SYN0600 SYN0002 PNP0f13 (active)
[ 1.661547] pnp 00:0a: [io 0x0060]
[ 1.661548] pnp 00:0a: [io 0x0064]
[ 1.661550] pnp 00:0a: [io 0x0062]
[ 1.661551] pnp 00:0a: [io 0x0066]
[ 1.661557] pnp 00:0a: [irq 1]
[ 1.661599] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active)
[ 1.661790] pnp 00:0b: [mem 0xfed1c000-0xfed1ffff]
[ 1.661792] pnp 00:0b: [mem 0xfed10000-0xfed17fff]
[ 1.661794] pnp 00:0b: [mem 0xfed18000-0xfed18fff]
[ 1.661795] pnp 00:0b: [mem 0xfed19000-0xfed19fff]
[ 1.661797] pnp 00:0b: [mem 0xf8000000-0xfbffffff]
[ 1.661798] pnp 00:0b: [mem 0xfed20000-0xfed3ffff]
[ 1.661799] pnp 00:0b: [mem 0xfed90000-0xfed93fff]
[ 1.661801] pnp 00:0b: [mem 0xfed45000-0xfed8ffff]
[ 1.661802] pnp 00:0b: [mem 0xff000000-0xffffffff]
[ 1.661804] pnp 00:0b: [mem 0xfee00000-0xfeefffff]
[ 1.661805] pnp 00:0b: [mem 0xdfa00000-0xdfa00fff]
[ 1.661872] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.661970] system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved
[ 1.662067] system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved
[ 1.662164] system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved
[ 1.662262] system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved
[ 1.662359] system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.662458] system 00:0b: [mem 0xfed90000-0xfed93fff] has been reserved
[ 1.662555] system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 1.662652] system 00:0b: [mem 0xff000000-0xffffffff] has been reserved
[ 1.662748] system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 1.662845] system 00:0b: [mem 0xdfa00000-0xdfa00fff] has been reserved
[ 1.662942] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.663001] pnp 00:0c: [irq 20]
[ 1.663057] pnp 00:0c: Plug and Play ACPI device, IDs SMO8800 (active)
[ 1.663167] pnp 00:0d: [mem 0x20000000-0x201fffff]
[ 1.663169] pnp 00:0d: [mem 0x40000000-0x401fffff]
[ 1.663238] system 00:0d: [mem 0x20000000-0x201fffff] has been reserved
[ 1.663336] system 00:0d: [mem 0x40000000-0x401fffff] has been reserved
[ 1.663433] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 1.663476] pnp: PnP ACPI: found 14 devices
[ 1.663568] ACPI: ACPI bus type pnp unregistered
[ 1.671530] pci 0000:00:1c.0: PCI bridge to [bus 03-04]
[ 1.671635] pci 0000:00:1c.1: PCI bridge to [bus 05-06]
[ 1.671731] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
[ 1.671832] pci 0000:00:1c.1: bridge window [mem 0xf1100000-0xf11fffff 64bit pref]
[ 1.671981] pci 0000:00:1c.3: PCI bridge to [bus 09-0a]
[ 1.672078] pci 0000:00:1c.3: bridge window [mem 0xf7e00000-0xf7efffff]
[ 1.672181] pci 0000:00:1c.4: PCI bridge to [bus 0b-0c]
[ 1.672280] pci 0000:00:1c.4: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 1.672390] pci 0000:00:1c.7: PCI bridge to [bus 11-16]
[ 1.672484] pci 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
[ 1.672585] pci 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff]
[ 1.672685] pci 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
[ 1.674196] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.674198] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.674199] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.674201] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 1.674202] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 1.674204] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 1.674206] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[ 1.674207] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
[ 1.674209] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
[ 1.674210] pci_bus 0000:00: resource 13 [mem 0xdfa00000-0xfeafffff]
[ 1.674212] pci_bus 0000:00: resource 14 [mem 0xfed40000-0xfed44fff]
[ 1.674214] pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
[ 1.674215] pci_bus 0000:05: resource 2 [mem 0xf1100000-0xf11fffff 64bit pref]
[ 1.674217] pci_bus 0000:09: resource 1 [mem 0xf7e00000-0xf7efffff]
[ 1.674219] pci_bus 0000:0b: resource 1 [mem 0xf7d00000-0xf7dfffff]
[ 1.674220] pci_bus 0000:11: resource 0 [io 0xc000-0xdfff]
[ 1.674222] pci_bus 0000:11: resource 1 [mem 0xf6c00000-0xf7cfffff]
[ 1.674223] pci_bus 0000:11: resource 2 [mem 0xf0000000-0xf10fffff 64bit pref]
[ 1.674294] NET: Registered protocol family 2
[ 1.674651] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 1.675640] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.676860] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.677082] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.677179] TCP: reno registered
[ 1.677287] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 1.677434] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 1.677635] NET: Registered protocol family 1
[ 1.677740] pci 0000:00:02.0: Boot video device
[ 1.919019] PCI: CLS 64 bytes, default 64
[ 1.919078] DMAR: No ATSR found
[ 1.919192] IOMMU 0 0xfed90000: using Queued invalidation
[ 1.919287] IOMMU 1 0xfed91000: using Queued invalidation
[ 1.919383] IOMMU: Setting RMRR:
[ 1.919483] IOMMU: Setting identity map for device 0000:00:02.0 [0xdb800000 - 0xdf9fffff]
[ 1.919983] IOMMU: Setting identity map for device 0000:00:1d.0 [0xdad53000 - 0xdad61fff]
[ 1.920148] IOMMU: Setting identity map for device 0000:00:1a.0 [0xdad53000 - 0xdad61fff]
[ 1.920302] IOMMU: Prepare 0-16MiB unity mapping for LPC
[ 1.920403] IOMMU: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff]
[ 1.920838] PCI-DMA: Intel(R) Virtualization Technology for Directed I/O
[ 1.923644] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x1b
[ 1.923747] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x1b
[ 1.923852] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x1b
[ 1.923951] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x1b
[ 1.924096] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.925327] sha1_ssse3: Using AVX optimized SHA-1 implementation
[ 1.926556] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.928453] DLM installed
[ 1.928682] msgmni has been set to 32105
[ 1.929951] NET: Registered protocol family 38
[ 1.930044] async_tx: api initialized (async)
[ 1.930176] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.930322] io scheduler noop registered
[ 1.930414] io scheduler deadline registered
[ 1.930523] io scheduler cfq registered (default)
[ 1.930957] pcieport 0000:00:1c.7: irq 42 for MSI/MSI-X
[ 1.931167] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.931347] pciehp 0000:00:1c.7:pcie04: Hotplug Controller:
[ 1.931442] pciehp 0000:00:1c.7:pcie04: Seg/Bus/Dev/Func/IRQ : 0000:00:1c.7 IRQ 42
[ 1.931587] pciehp 0000:00:1c.7:pcie04: Vendor ID : 0x8086
[ 1.931683] pciehp 0000:00:1c.7:pcie04: Device ID : 0x1c1e
[ 1.931780] pciehp 0000:00:1c.7:pcie04: Subsystem ID : 0x04b3
[ 1.931876] pciehp 0000:00:1c.7:pcie04: Subsystem Vendor ID : 0x1028
[ 1.931973] pciehp 0000:00:1c.7:pcie04: PCIe Cap offset : 0x40
[ 1.932070] pciehp 0000:00:1c.7:pcie04: PCI resource [13] : [io 0xc000-0xdfff]
[ 1.932216] pciehp 0000:00:1c.7:pcie04: PCI resource [14] : [mem 0xf6c00000-0xf7cfffff]
[ 1.932363] pciehp 0000:00:1c.7:pcie04: PCI resource [15] : [mem 0xf0000000-0xf10fffff 64bit pref]
[ 1.932510] pciehp 0000:00:1c.7:pcie04: Slot Capabilities : 0x003cb260
[ 1.932608] pciehp 0000:00:1c.7:pcie04: Physical Slot Number : 7
[ 1.932704] pciehp 0000:00:1c.7:pcie04: Attention Button : no
[ 1.932800] pciehp 0000:00:1c.7:pcie04: Power Controller : no
[ 1.932896] pciehp 0000:00:1c.7:pcie04: MRL Sensor : no
[ 1.932991] pciehp 0000:00:1c.7:pcie04: Attention Indicator : no
[ 1.933087] pciehp 0000:00:1c.7:pcie04: Power Indicator : no
[ 1.933184] pciehp 0000:00:1c.7:pcie04: Hot-Plug Surprise : yes
[ 1.933281] pciehp 0000:00:1c.7:pcie04: EMI Present : no
[ 1.933377] pciehp 0000:00:1c.7:pcie04: Command Completed : no
[ 1.933474] pciehp 0000:00:1c.7:pcie04: Slot Status : 0x0000
[ 1.933573] pciehp 0000:00:1c.7:pcie04: Slot Control : 0x0000
[ 1.933672] pciehp 0000:00:1c.7:pcie04: Link Active Reporting supported
[ 1.933681] pciehp 0000:00:1c.7:pcie04: HPC vendor_id 8086 device_id 1c1e ss_vid 1028 ss_did 4b3
[ 1.933830] pciehp 0000:00:1c.7:pcie04: Registering domain:bus:dev=0000:11:00 sun=7
[ 1.933879] pciehp 0000:00:1c.7:pcie04: pciehp_get_power_status: SLOTCTRL 58 value read 1028
[ 1.933881] pciehp 0000:00:1c.7:pcie04: service driver pciehp loaded
[ 1.933906] pciehp: pcie_port_service_register = 0
[ 1.933907] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.934005] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 1.934427] intel_idle: MWAIT substates: 0x21120
[ 1.934428] intel_idle: v0.4 model 0x2A
[ 1.934430] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.934535] ACPI: AC Adapter [AC] (on-line)
[ 1.934739] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 1.936340] ACPI: Lid Switch [LID0]
[ 1.936490] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 1.936638] ACPI: Power Button [PWRB]
[ 1.936788] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 1.936936] ACPI: Sleep Button [SBTN]
[ 1.937083] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.937227] ACPI: Power Button [PWRF]
[ 1.937579] ACPI: Requesting acpi_cpufreq
[ 1.947774] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.947870] ACPI: Thermal Zone [THM] (67 C)
[ 1.948068] GHES: HEST is not enabled!
[ 1.968922] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.969928] Non-volatile memory driver v1.3
[ 1.970351] i8k: unable to get SMM BIOS version
[ 1.973395] Dell laptop SMM driver v1.14 21/02/2005 Massimo Dal Zotto (dz@debian.org)
[ 1.973639] Linux agpgart interface v0.103
[ 1.973660] ACPI: Battery Slot [BAT0] (battery present)
[ 1.973892] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
[ 1.974068] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 1.975259] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[ 1.975504] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 1.975672] ipmi message handler version 39.2
[ 1.975772] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
[ 1.975919] Hangcheck: Using getrawmonotonic().
[ 1.976050] [drm] Initialized drm 1.1.0 20060810
[ 1.976383] i915 0000:00:02.0: setting latency timer to 64
[ 2.012659] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
[ 2.012805] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 2.013230] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[ 2.013238] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 2.013334] [drm] Driver supports precise vblank timestamp query.
[ 2.013457] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.090611] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 2.644935] fbcon: inteldrmfb (fb0) is primary device
[ 2.917377] Refined TSC clocksource calibration: 2793.656 MHz.
[ 2.917385] Switching to clocksource tsc
[ 3.146238] Console: switching to colour frame buffer device 170x48
[ 3.149008] fb0: inteldrmfb frame buffer device
[ 3.149009] drm: registered panic notifier
[ 3.150264] acpi device:34: registered as cooling_device4
[ 3.150505] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4
[ 3.150549] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 3.150612] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 3.151453] loop: module loaded
[ 3.151588] ahci 0000:00:1f.2: version 3.0
[ 3.151637] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
[ 3.151663] ahci: SSS flag set, parallel bus scan disabled
[ 3.167021] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x31 impl SATA mode
[ 3.167131] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
[ 3.167172] ahci 0000:00:1f.2: setting latency timer to 64
[ 3.207716] scsi0 : ahci
[ 3.207828] scsi1 : ahci
[ 3.207919] scsi2 : ahci
[ 3.208011] scsi3 : ahci
[ 3.208099] scsi4 : ahci
[ 3.208191] scsi5 : ahci
[ 3.209471] ata1: SATA max UDMA/133 abar m2048@0xf7f06000 port 0xf7f06100 irq 44
[ 3.210450] ata2: DUMMY
[ 3.211415] ata3: DUMMY
[ 3.212364] ata4: DUMMY
[ 3.213306] ata5: SATA max UDMA/133 abar m2048@0xf7f06000 port 0xf7f06300 irq 44
[ 3.214272] ata6: SATA max UDMA/133 abar m2048@0xf7f06000 port 0xf7f06380 irq 44
[ 3.215358] tun: Universal TUN/TAP device driver, 1.6
[ 3.216300] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 3.217319] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 3.218382] r8169 0000:05:00.0: irq 45 for MSI/MSI-X
[ 3.218539] r8169 0000:05:00.0: eth0: RTL8168e/8111e at 0xffffc900065d2000, 18:03:73:a0:6f:6a, XID 0c200000 IRQ 45
[ 3.219516] r8169 0000:05:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 3.220506] VMware vmxnet3 virtual NIC driver - version 1.1.29.0-k-NAPI
[ 3.221518] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.222492] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 3.222495] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 3.223443] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 3.224423] ehci_hcd 0000:00:1a.0: debug port 2
[ 3.229243] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 3.229256] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7f08000
[ 3.246879] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 3.247908] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.248839] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.249773] usb usb1: Product: EHCI Host Controller
[ 3.250701] usb usb1: Manufacturer: Linux 3.4.0-rc3-default ehci_hcd
[ 3.251634] usb usb1: SerialNumber: 0000:00:1a.0
[ 3.252705] hub 1-0:1.0: USB hub found
[ 3.253653] hub 1-0:1.0: 2 ports detected
[ 3.254644] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3.254648] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 3.255576] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 3.256529] ehci_hcd 0000:00:1d.0: debug port 2
[ 3.261333] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 3.261344] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7f07000
[ 3.276833] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 3.277842] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.278750] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.279654] usb usb2: Product: EHCI Host Controller
[ 3.280549] usb usb2: Manufacturer: Linux 3.4.0-rc3-default ehci_hcd
[ 3.281453] usb usb2: SerialNumber: 0000:00:1d.0
[ 3.282447] hub 2-0:1.0: USB hub found
[ 3.283332] hub 2-0:1.0: 2 ports detected
[ 3.284254] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.285206] xhci_hcd 0000:0b:00.0: xHCI Host Controller
[ 3.286107] xhci_hcd 0000:0b:00.0: new USB bus registered, assigned bus number 3
[ 3.287214] xhci_hcd 0000:0b:00.0: irq 16, io mem 0xf7d00000
[ 3.288209] xhci_hcd 0000:0b:00.0: irq 46 for MSI/MSI-X
[ 3.288214] xhci_hcd 0000:0b:00.0: irq 47 for MSI/MSI-X
[ 3.288218] xhci_hcd 0000:0b:00.0: irq 48 for MSI/MSI-X
[ 3.288222] xhci_hcd 0000:0b:00.0: irq 49 for MSI/MSI-X
[ 3.288226] xhci_hcd 0000:0b:00.0: irq 50 for MSI/MSI-X
[ 3.288320] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.289259] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.290194] usb usb3: Product: xHCI Host Controller
[ 3.291118] usb usb3: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
[ 3.292059] usb usb3: SerialNumber: 0000:0b:00.0
[ 3.293076] xHCI xhci_add_endpoint called for root hub
[ 3.293078] xHCI xhci_check_bandwidth called for root hub
[ 3.293112] hub 3-0:1.0: USB hub found
[ 3.294056] hub 3-0:1.0: 2 ports detected
[ 3.295042] xhci_hcd 0000:0b:00.0: xHCI Host Controller
[ 3.295978] xhci_hcd 0000:0b:00.0: new USB bus registered, assigned bus number 4
[ 3.296943] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 3.297877] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.298798] usb usb4: Product: xHCI Host Controller
[ 3.299709] usb usb4: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
[ 3.300609] usb usb4: SerialNumber: 0000:0b:00.0
[ 3.301562] xHCI xhci_add_endpoint called for root hub
[ 3.301564] xHCI xhci_check_bandwidth called for root hub
[ 3.301598] hub 4-0:1.0: USB hub found
[ 3.302490] hub 4-0:1.0: 2 ports detected
[ 3.303473] usbcore: registered new interface driver uas
[ 3.304427] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2] at 0x60,0x64 irq 1,12
[ 3.307626] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.308545] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.309562] mousedev: PS/2 mouse device common for all mice
[ 3.310726] rtc_cmos 00:05: RTC can wake from S4
[ 3.311752] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 3.312677] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 3.313602] i2c /dev entries driver
[ 3.314881] gspca_main: v2.14.0 registered
[ 3.315816] usbcore: registered new interface driver uvcvideo
[ 3.316736] USB Video Class driver (1.1.1)
[ 3.317750] coretemp coretemp.0: TjMax is 100 degrees C
[ 3.317760] coretemp coretemp.0: TjMax is 100 degrees C
[ 3.317770] coretemp coretemp.0: TjMax is 100 degrees C
[ 3.317798] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 3.318793] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 3.319788] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 3.320734] iTCO_vendor_support: vendor-support=0
[ 3.321690] md: linear personality registered for level -1
[ 3.322617] md: raid0 personality registered for level 0
[ 3.323546] md: raid1 personality registered for level 1
[ 3.324464] md: raid10 personality registered for level 10
[ 3.324941] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 3.326332] md: raid6 personality registered for level 6
[ 3.327298] md: raid5 personality registered for level 5
[ 3.328238] md: raid4 personality registered for level 4
[ 3.329190] device-mapper: uevent: version 1.0.3
[ 3.330164] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 3.331153] device-mapper: dm-log-userspace: version 1.1.0 loaded
[ 3.332109] usbcore: registered new interface driver btusb
[ 3.333119] cpuidle: using governor ladder
[ 3.334137] cpuidle: using governor menu
[ 3.335201] sdhci: Secure Digital Host Controller Interface driver
[ 3.336131] sdhci: Copyright(c) Pierre Ossman
[ 3.337823] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 3.339436] usbcore: registered new interface driver usbhid
[ 3.340384] usbhid: USB HID core driver
[ 3.341380] mei 0000:00:16.0: setting latency timer to 64
[ 3.341428] mei 0000:00:16.0: irq 51 for MSI/MSI-X
[ 3.365918] input: Dell WMI hotkeys as /devices/virtual/input/input6
[ 3.378010] intel_oaktrail: Platform not recognized (You could try the module's force-parameter)
[ 3.378166] snd_hda_intel 0000:00:1b.0: irq 52 for MSI/MSI-X
[ 3.556497] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.563628] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 3.565021] ata1.00: ATA-8: WDC WD7500BPKT-75PK4T0, 01.01A01, max UDMA/133
[ 3.566083] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 3.566401] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 3.574146] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 3.575497] ata1.00: configured for UDMA/133
[ 3.576733] scsi 0:0:0:0: Direct-Access ATA WDC WD7500BPKT-7 01.0 PQ: 0 ANSI: 5
[ 3.578237] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[ 3.578430] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.580334] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 3.581459] sd 0:0:0:0: [sda] Write Protect is off
[ 3.582478] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.582559] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.684356] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 3.686146] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.716784] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 3.717873] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.719523] hub 1-1:1.0: USB hub found
[ 3.720686] hub 1-1:1.0: 6 ports detected
[ 3.836105] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 3.925882] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.930328] ata5.00: ATAPI: PLDS DVD+/-RW DS-8A8SH, KD11, max UDMA/100
[ 3.936800] ata5.00: configured for UDMA/100
[ 3.950409] scsi 4:0:0:0: CD-ROM PLDS DVD+-RW DS-8A8SH KD11 PQ: 0 ANSI: 5
[ 3.965219] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.966308] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.967710] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 3.967969] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 3.986427] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 3.987549] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.989092] hub 2-1:1.0: USB hub found
[ 3.990283] hub 2-1:1.0: 8 ports detected
[ 3.997272] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
[ 4.024570] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 4.026131] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 4.027692] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 4.029659] ALSA device list:
[ 4.030748] #0: HDA Intel PCH at 0xf7f00000 irq 52
[ 4.031916] TCP: cubic registered
[ 4.033001] NET: Registered protocol family 17
[ 4.034120] Bluetooth: RFCOMM TTY layer initialized
[ 4.035203] Bluetooth: RFCOMM socket layer initialized
[ 4.036278] Bluetooth: RFCOMM ver 1.11
[ 4.037330] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 4.038370] Bluetooth: BNEP filters: protocol multicast
[ 4.039395] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 4.040721] sctp: Hash tables configured (established 65536 bind 65536)
[ 4.041864] Registering the dns_resolver key type
[ 4.043215] PM: Checking hibernation image partition /dev/sda6
[ 4.043220] PM: Hibernation image partition 8:6 present
[ 4.043221] PM: Looking for hibernation image.
[ 4.099005] PM: Image not found (code -22)
[ 4.099013] PM: Hibernation image not present or could not be loaded.
[ 4.099042] registered taskstats version 1
[ 4.101187] rtc_cmos 00:05: setting system clock to 2012-04-20 12:49:27 UTC (1334926167)
[ 4.103057] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
[ 4.105605] usb 3-1: new low-speed USB device number 2 using xhci_hcd
[ 4.159894] usb 3-1: New USB device found, idVendor=046d, idProduct=c050
[ 4.160850] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.161718] usb 3-1: Product: USB-PS/2 Optical Mouse
[ 4.162569] usb 3-1: Manufacturer: Logitech
[ 4.163648] usb 3-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 4.181153] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1c.4/0000:0b:00.0/usb3/3-1/3-1:1.0/input/input11
[ 4.182557] generic-usb 0003:046D:C050.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:0b:00.0-1/input0
[ 4.255487] usb 1-1.5: new high-speed USB device number 3 using ehci_hcd
[ 4.314280] input: DualPoint Stick as /devices/platform/i8042/serio1/input/input12
[ 4.315285] ata6: SATA link down (SStatus 0 SControl 300)
[ 4.329297] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input13
[ 4.333548] md: Waiting for all devices to be available before autodetect
[ 4.334522] md: If you don't use raid, use raid=noautodetect
[ 4.335963] md: Autodetecting RAID arrays.
[ 4.336939] md: Scanned 0 and added 0 devices.
[ 4.337889] md: autorun ...
[ 4.338825] md: ... autorun DONE.
[ 4.372790] usb 1-1.5: New USB device found, idVendor=05ca, idProduct=1820
[ 4.373813] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.374721] usb 1-1.5: Product: Laptop_Integrated_Webcam_FHD
[ 4.375639] usb 1-1.5: Manufacturer: CN01MWM9724871A4KB28A00
[ 4.377412] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_FHD (05ca:1820)
[ 4.380166] input: Laptop_Integrated_Webcam_FHD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input14
[ 4.391741] kjournald starting. Commit interval 5 seconds
[ 4.391985] EXT3-fs (sda5): mounted filesystem with writeback data mode
[ 4.392000] VFS: Mounted root (ext3 filesystem) readonly on device 8:5.
[ 4.432855] devtmpfs: mounted
[ 4.433915] Freeing unused kernel memory: 544k freed
[ 4.455233] usb 2-1.2: new low-speed USB device number 3 using ehci_hcd
[ 4.572991] usb 2-1.2: New USB device found, idVendor=04f2, idProduct=0116
[ 4.574023] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.574958] usb 2-1.2: Product: USB Keyboard
[ 4.575878] usb 2-1.2: Manufacturer: CHICONY
[ 4.582236] input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input15
[ 4.583343] generic-usb 0003:04F2:0116.0002: input,hidraw1: USB HID v1.10 Keyboard [CHICONY USB Keyboard] on usb-0000:00:1d.0-1.2/input0
[ 4.675069] usb 2-1.3: new full-speed USB device number 4 using ehci_hcd
[ 4.786237] usb 2-1.3: New USB device found, idVendor=138a, idProduct=0011
[ 4.787321] usb 2-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[ 4.788323] usb 2-1.3: SerialNumber: 56ed5821afe2
[ 4.864591] usb 2-1.6: new high-speed USB device number 5 using ehci_hcd
[ 5.229381] usb 2-1.6: New USB device found, idVendor=0bda, idProduct=0138
[ 5.230431] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5.231432] usb 2-1.6: Product: USB2.0-CRW
[ 5.232422] usb 2-1.6: Manufacturer: Generic
[ 5.233387] usb 2-1.6: SerialNumber: 20090516388200000
[ 7.430357] udevd[1756]: starting version 171
[ 9.882728] ACPI Warning: 0x000000000000f040-0x000000000000f05f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120320/utaddress-251)
[ 9.882734] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.337056] Initializing USB Mass Storage driver...
[ 10.337165] scsi6 : usb-storage 2-1.6:1.0
[ 10.337250] usbcore: registered new interface driver usb-storage
[ 10.337252] USB Mass Storage support registered.
[ 10.860717] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d
[ 10.860719] Copyright(c) 2003-2012 Intel Corporation
[ 10.860904] iwlwifi 0000:09:00.0: pci_resource_len = 0x00002000
[ 10.860906] iwlwifi 0000:09:00.0: pci_resource_base = ffffc90006684000
[ 10.860907] iwlwifi 0000:09:00.0: HW Revision ID = 0x34
[ 10.861000] iwlwifi 0000:09:00.0: irq 53 for MSI/MSI-X
[ 10.928675] iwlwifi 0000:09:00.0: loaded firmware version 17.168.5.2 build 35905
[ 10.928770] iwlwifi 0000:09:00.0: CONFIG_IWLWIFI_DEBUG enabled
[ 10.928772] iwlwifi 0000:09:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[ 10.928773] iwlwifi 0000:09:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[ 10.928774] iwlwifi 0000:09:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled
[ 10.928775] iwlwifi 0000:09:00.0: CONFIG_IWLWIFI_P2P disabled
[ 10.928777] iwlwifi 0000:09:00.0: Detected Intel(R) Centrino(R) Wireless-N 1030 BGN, REV=0xB0
[ 10.928822] iwlwifi 0000:09:00.0: L1 Disabled; Enabling L0S
[ 10.945995] iwlwifi 0000:09:00.0: device EEPROM VER=0x71a, CALIB=0x6
[ 10.945997] iwlwifi 0000:09:00.0: Device SKU: 0x150
[ 10.945998] iwlwifi 0000:09:00.0: Valid Tx ant: 0x1, Valid Rx ant: 0x3
[ 10.946008] iwlwifi 0000:09:00.0: Tunable channels: 13 802.11bg, 0 802.11a channels
[ 10.946132] Registered led device: phy0-led
[ 10.946191] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 11.338142] scsi 6:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 11.338327] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 11.344122] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 12.598776] EXT3-fs (sda5): using internal journal
[ 12.821092] Adding 4998972k swap on /dev/sda6. Priority:-1 extents:1 across:4998972k
[ 16.320484] r8169 0000:05:00.0: eth0: unable to load firmware patch rtl_nic/rtl8168e-2.fw (-2)
[ 16.351199] r8169 0000:05:00.0: eth0: link down
[ 16.351214] r8169 0000:05:00.0: eth0: link down
[ 18.071435] r8169 0000:05:00.0: eth0: link up
[ 22.102083] microcode: CPU0 updated to revision 0x25, date = 2011-10-11
[ 22.102437] microcode: CPU1 updated to revision 0x25, date = 2011-10-11
[ 22.102768] microcode: CPU2 updated to revision 0x25, date = 2011-10-11
[ 22.103116] microcode: CPU3 updated to revision 0x25, date = 2011-10-11
[ 22.279372] [drm] Changing LVDS panel from (+hsync, -vsync) to (-hsync, -vsync)
[ 24.182695] r8169 0000:05:00.0: eth0: link down
[ 26.568128] r8169 0000:05:00.0: eth0: link up
[ 43.557718] [drm] Changing LVDS panel from (-hsync, -vsync) to (+hsync, -vsync)
[ 45.642233] ata1.00: configured for UDMA/133
[ 45.642247] ata1: EH complete
[ 94.357215] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 108
[ 94.357225] pciehp 0000:00:1c.7:pcie04: LinkState change
[ 94.357228] pciehp 0000:00:1c.7:pcie04: lnk_status = 7011
[ 94.357229] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
[ 94.357232] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
[ 94.357273] pciehp 0000:00:1c.7:pcie04: Surprise Removal
[ 94.357288] pciehp 0000:00:1c.7:pcie04: check_link_active: lnk_status = 7011
[ 94.461173] pciehp 0000:00:1c.7:pcie04: pciehp_check_link_status: lnk_status = 7011
[ 94.461274] pci 0000:11:00.0: [1033:0194] type 00 class 0x0c0330
[ 94.461325] pci 0000:11:00.0: reg 10: [mem 0x00000000-0x00001fff 64bit]
[ 94.461567] pci 0000:11:00.0: PME# supported from D0 D3hot
[ 94.481210] pci 0000:11:00.0: BAR 0: assigned [mem 0xf6c00000-0xf6c01fff 64bit]
[ 94.481255] pcieport 0000:00:1c.7: PCI bridge to [bus 11-16]
[ 94.481258] pcieport 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
[ 94.481263] pcieport 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff]
[ 94.481267] pcieport 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
[ 94.481407] xhci_hcd 0000:11:00.0: enabling device (0100 -> 0102)
[ 94.481463] xhci_hcd 0000:11:00.0: xHCI Host Controller
[ 94.481468] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 5
[ 94.481767] xhci_hcd 0000:11:00.0: irq 19, io mem 0xf6c00000
[ 94.481872] xhci_hcd 0000:11:00.0: irq 54 for MSI/MSI-X
[ 94.481876] xhci_hcd 0000:11:00.0: irq 55 for MSI/MSI-X
[ 94.481879] xhci_hcd 0000:11:00.0: irq 56 for MSI/MSI-X
[ 94.481883] xhci_hcd 0000:11:00.0: irq 57 for MSI/MSI-X
[ 94.481887] xhci_hcd 0000:11:00.0: irq 58 for MSI/MSI-X
[ 94.482036] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 94.482038] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 94.482039] usb usb5: Product: xHCI Host Controller
[ 94.482040] usb usb5: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
[ 94.482041] usb usb5: SerialNumber: 0000:11:00.0
[ 94.482164] xHCI xhci_add_endpoint called for root hub
[ 94.482166] xHCI xhci_check_bandwidth called for root hub
[ 94.482188] hub 5-0:1.0: USB hub found
[ 94.482198] hub 5-0:1.0: 2 ports detected
[ 94.482265] xhci_hcd 0000:11:00.0: xHCI Host Controller
[ 94.482268] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 6
[ 94.485004] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[ 94.485007] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 94.485009] usb usb6: Product: xHCI Host Controller
[ 94.485011] usb usb6: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
[ 94.485013] usb usb6: SerialNumber: 0000:11:00.0
[ 94.485115] xHCI xhci_add_endpoint called for root hub
[ 94.485117] xHCI xhci_check_bandwidth called for root hub
[ 94.485148] hub 6-0:1.0: USB hub found
[ 94.485167] hub 6-0:1.0: 2 ports detected
[ 98.754813] usb 5-1: new high-speed USB device number 2 using xhci_hcd
[ 98.778392] usb 5-1: New USB device found, idVendor=13fd, idProduct=0550
[ 98.778403] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 98.778409] usb 5-1: Product: ST9160821A
[ 98.778415] usb 5-1: Manufacturer: Initio
[ 98.778419] usb 5-1: SerialNumber: 00101005500011B80
[ 98.778626] usb 5-1: ep 0x81 - rounding interval to 32768 microframes, ep desc says 0 microframes
[ 98.778632] usb 5-1: ep 0x2 - rounding interval to 32768 microframes, ep desc says 0 microframes
[ 98.779399] scsi7 : usb-storage 5-1:1.0
[ 98.781416] generic-usb 0003:13FD:0550.0003: hiddev0,hidraw2: USB HID v1.10 Device [Initio ST9160821A ] on usb-0000:11:00.0-1/input1
[ 99.774241] scsi 7:0:0:0: Direct-Access Initio ST9160821A 3.12 PQ: 0 ANSI: 0
[ 99.774396] sd 7:0:0:0: Attached scsi generic sg3 type 0
[ 99.774615] sd 7:0:0:0: [sdc] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 99.775241] sd 7:0:0:0: [sdc] Write Protect is off
[ 99.775244] sd 7:0:0:0: [sdc] Mode Sense: 86 0b 00 02
[ 99.776006] sd 7:0:0:0: [sdc] Incomplete mode parameter data
[ 99.776009] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 99.777987] sd 7:0:0:0: [sdc] Incomplete mode parameter data
[ 99.777989] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 99.996721] sdc: sdc1 sdc2
[ 99.998515] sd 7:0:0:0: [sdc] Incomplete mode parameter data
[ 99.998518] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 99.998520] sd 7:0:0:0: [sdc] Attached SCSI disk
[ 142.235276] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 108
[ 142.235278] pciehp 0000:00:1c.7:pcie04: LinkState change
[ 142.235281] pciehp 0000:00:1c.7:pcie04: lnk_status = 5011
[ 142.235283] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
[ 142.235286] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
[ 142.235324] pciehp 0000:00:1c.7:pcie04: Surprise Removal
[ 142.235354] pciehp 0000:00:1c.7:pcie04: Disabling domain:bus:device=0000:11:00
[ 142.235357] pciehp 0000:00:1c.7:pcie04: pciehp_unconfigure_device: domain:bus:dev = 0000:11:00
[ 142.240178] xhci_hcd 0000:11:00.0: remove, state 4
[ 142.240185] usb usb6: USB disconnect, device number 1
[ 142.240236] xHCI xhci_drop_endpoint called for root hub
[ 142.240238] xHCI xhci_check_bandwidth called for root hub
[ 142.240323] xhci_hcd 0000:11:00.0: Host not halted after 16000 microseconds.
[ 142.240326] xhci_hcd 0000:11:00.0: USB bus 6 deregistered
[ 142.240332] xhci_hcd 0000:11:00.0: remove, state 1
[ 142.240337] usb usb5: USB disconnect, device number 1
[ 142.240339] usb 5-1: USB disconnect, device number 2
[ 192.165855] xhci_hcd 0000:11:00.0: Timeout while waiting for configure endpoint command
[ 192.166052] xHCI xhci_drop_endpoint called for root hub
[ 192.166054] xHCI xhci_check_bandwidth called for root hub
[ 192.166142] xhci_hcd 0000:11:00.0: Host not halted after 16000 microseconds.
[ 192.166242] xhci_hcd 0000:11:00.0: USB bus 5 deregistered
[ 192.166298] pci 0000:11:00.0: freeing pci_dev info
[ 414.651954] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 108
[ 414.651964] pciehp 0000:00:1c.7:pcie04: LinkState change
[ 414.651967] pciehp 0000:00:1c.7:pcie04: lnk_status = 7011
[ 414.651969] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
[ 414.651972] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
[ 414.652012] pciehp 0000:00:1c.7:pcie04: Surprise Removal
[ 414.652044] pciehp 0000:00:1c.7:pcie04: check_link_active: lnk_status = 7011
[ 414.754443] pciehp 0000:00:1c.7:pcie04: pciehp_check_link_status: lnk_status = 7011
[ 414.754540] pci 0000:11:00.0: [1033:0194] type 00 class 0x0c0330
[ 414.754591] pci 0000:11:00.0: reg 10: [mem 0x00000000-0x00001fff 64bit]
[ 414.754834] pci 0000:11:00.0: PME# supported from D0 D3hot
[ 414.774447] pci 0000:11:00.0: BAR 0: assigned [mem 0xf6c00000-0xf6c01fff 64bit]
[ 414.774478] pcieport 0000:00:1c.7: PCI bridge to [bus 11-16]
[ 414.774493] pcieport 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
[ 414.774498] pcieport 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff]
[ 414.774502] pcieport 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
[ 414.774644] xhci_hcd 0000:11:00.0: enabling device (0100 -> 0102)
[ 414.774693] xhci_hcd 0000:11:00.0: xHCI Host Controller
[ 414.774698] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 5
[ 414.774992] xhci_hcd 0000:11:00.0: irq 19, io mem 0xf6c00000
[ 414.775103] xhci_hcd 0000:11:00.0: irq 54 for MSI/MSI-X
[ 414.775109] xhci_hcd 0000:11:00.0: irq 55 for MSI/MSI-X
[ 414.775114] xhci_hcd 0000:11:00.0: irq 56 for MSI/MSI-X
[ 414.775127] xhci_hcd 0000:11:00.0: irq 57 for MSI/MSI-X
[ 414.775133] xhci_hcd 0000:11:00.0: irq 58 for MSI/MSI-X
[ 414.775300] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 414.775302] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 414.775303] usb usb5: Product: xHCI Host Controller
[ 414.775304] usb usb5: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
[ 414.775305] usb usb5: SerialNumber: 0000:11:00.0
[ 414.775425] xHCI xhci_add_endpoint called for root hub
[ 414.775427] xHCI xhci_check_bandwidth called for root hub
[ 414.775450] hub 5-0:1.0: USB hub found
[ 414.775462] hub 5-0:1.0: 2 ports detected
[ 414.775559] xhci_hcd 0000:11:00.0: xHCI Host Controller
[ 414.775570] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 6
[ 414.778228] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[ 414.778230] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 414.778231] usb usb6: Product: xHCI Host Controller
[ 414.778232] usb usb6: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
[ 414.778234] usb usb6: SerialNumber: 0000:11:00.0
[ 414.778291] xHCI xhci_add_endpoint called for root hub
[ 414.778293] xHCI xhci_check_bandwidth called for root hub
[ 414.778320] hub 6-0:1.0: USB hub found
[ 414.778332] hub 6-0:1.0: 2 ports detected
[ 415.093937] usb 5-1: new high-speed USB device number 2 using xhci_hcd
[ 415.117398] usb 5-1: New USB device found, idVendor=13fd, idProduct=0550
[ 415.117409] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 415.117415] usb 5-1: Product: ST9160821A
[ 415.117420] usb 5-1: Manufacturer: Initio
[ 415.117425] usb 5-1: SerialNumber: 00101005500011B80
[ 415.117601] usb 5-1: ep 0x81 - rounding interval to 32768 microframes, ep desc says 0 microframes
[ 415.117606] usb 5-1: ep 0x2 - rounding interval to 32768 microframes, ep desc says 0 microframes
[ 415.118444] scsi8 : usb-storage 5-1:1.0
[ 415.120317] generic-usb 0003:13FD:0550.0004: hiddev0,hidraw2: USB HID v1.10 Device [Initio ST9160821A ] on usb-0000:11:00.0-1/input1
[ 416.113367] scsi 8:0:0:0: Direct-Access Initio ST9160821A 3.12 PQ: 0 ANSI: 0
[ 416.113528] sd 8:0:0:0: Attached scsi generic sg3 type 0
[ 416.113736] sd 8:0:0:0: [sdc] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 416.114340] sd 8:0:0:0: [sdc] Write Protect is off
[ 416.114344] sd 8:0:0:0: [sdc] Mode Sense: 86 0b 00 02
[ 416.115143] sd 8:0:0:0: [sdc] Incomplete mode parameter data
[ 416.115153] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[ 416.116993] sd 8:0:0:0: [sdc] Incomplete mode parameter data
[ 416.117001] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[ 416.309674] sdc: sdc1 sdc2
[ 416.311312] sd 8:0:0:0: [sdc] Incomplete mode parameter data
[ 416.311320] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[ 416.311327] sd 8:0:0:0: [sdc] Attached SCSI disk
[ 481.131828] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 108
[ 481.131830] pciehp 0000:00:1c.7:pcie04: LinkState change
[ 481.131834] pciehp 0000:00:1c.7:pcie04: lnk_status = 5011
[ 481.131835] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
[ 481.131838] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
[ 481.131876] pciehp 0000:00:1c.7:pcie04: Surprise Removal
[ 481.131906] pciehp 0000:00:1c.7:pcie04: Disabling domain:bus:device=0000:11:00
[ 481.131909] pciehp 0000:00:1c.7:pcie04: pciehp_unconfigure_device: domain:bus:dev = 0000:11:00
[ 481.135724] xhci_hcd 0000:11:00.0: remove, state 4
[ 481.135731] usb usb6: USB disconnect, device number 1
[ 481.135806] xHCI xhci_drop_endpoint called for root hub
[ 481.135808] xHCI xhci_check_bandwidth called for root hub
[ 481.135884] xhci_hcd 0000:11:00.0: Host not halted after 16000 microseconds.
[ 481.135888] xhci_hcd 0000:11:00.0: USB bus 6 deregistered
[ 481.135893] xhci_hcd 0000:11:00.0: remove, state 1
[ 481.135898] usb usb5: USB disconnect, device number 1
[ 481.135900] usb 5-1: USB disconnect, device number 2
[ 531.061380] xhci_hcd 0000:11:00.0: Timeout while waiting for configure endpoint command
[ 531.061570] xHCI xhci_drop_endpoint called for root hub
[ 531.061572] xHCI xhci_check_bandwidth called for root hub
[ 531.061659] xhci_hcd 0000:11:00.0: Host not halted after 16000 microseconds.
[ 531.061761] xhci_hcd 0000:11:00.0: USB bus 5 deregistered
[ 531.061818] pci 0000:11:00.0: freeing pci_dev info
[ 592.704668] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 108
[ 592.704670] pciehp 0000:00:1c.7:pcie04: LinkState change
[ 592.704673] pciehp 0000:00:1c.7:pcie04: lnk_status = 7011
[ 592.704682] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
[ 592.704685] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
[ 592.704724] pciehp 0000:00:1c.7:pcie04: Surprise Removal
[ 592.704758] pciehp 0000:00:1c.7:pcie04: check_link_active: lnk_status = 7011
[ 592.809387] pciehp 0000:00:1c.7:pcie04: pciehp_check_link_status: lnk_status = 7011
[ 592.809490] pci 0000:11:00.0: [1033:0194] type 00 class 0x0c0330
[ 592.809541] pci 0000:11:00.0: reg 10: [mem 0x00000000-0x00001fff 64bit]
[ 592.809786] pci 0000:11:00.0: PME# supported from D0 D3hot
[ 592.829402] pci 0000:11:00.0: BAR 0: assigned [mem 0xf6c00000-0xf6c01fff 64bit]
[ 592.829447] pcieport 0000:00:1c.7: PCI bridge to [bus 11-16]
[ 592.829450] pcieport 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
[ 592.829455] pcieport 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff]
[ 592.829459] pcieport 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
[ 592.829593] xhci_hcd 0000:11:00.0: enabling device (0100 -> 0102)
[ 592.829671] xhci_hcd 0000:11:00.0: xHCI Host Controller
[ 592.829676] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 5
[ 592.829973] xhci_hcd 0000:11:00.0: irq 19, io mem 0xf6c00000
[ 592.830090] xhci_hcd 0000:11:00.0: irq 54 for MSI/MSI-X
[ 592.830094] xhci_hcd 0000:11:00.0: irq 55 for MSI/MSI-X
[ 592.830099] xhci_hcd 0000:11:00.0: irq 56 for MSI/MSI-X
[ 592.830103] xhci_hcd 0000:11:00.0: irq 57 for MSI/MSI-X
[ 592.830107] xhci_hcd 0000:11:00.0: irq 58 for MSI/MSI-X
[ 592.830258] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 592.830260] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 592.830261] usb usb5: Product: xHCI Host Controller
[ 592.830262] usb usb5: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
[ 592.830263] usb usb5: SerialNumber: 0000:11:00.0
[ 592.830380] xHCI xhci_add_endpoint called for root hub
[ 592.830382] xHCI xhci_check_bandwidth called for root hub
[ 592.830421] hub 5-0:1.0: USB hub found
[ 592.830434] hub 5-0:1.0: 2 ports detected
[ 592.830495] xhci_hcd 0000:11:00.0: xHCI Host Controller
[ 592.830498] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 6
[ 592.833211] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[ 592.833214] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 592.833216] usb usb6: Product: xHCI Host Controller
[ 592.833217] usb usb6: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
[ 592.833219] usb usb6: SerialNumber: 0000:11:00.0
[ 592.833317] xHCI xhci_add_endpoint called for root hub
[ 592.833318] xHCI xhci_check_bandwidth called for root hub
[ 592.833345] hub 6-0:1.0: USB hub found
[ 592.833363] hub 6-0:1.0: 2 ports detected
[ 725.782817] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 108
[ 725.782819] pciehp 0000:00:1c.7:pcie04: LinkState change
[ 725.782822] pciehp 0000:00:1c.7:pcie04: lnk_status = 5011
[ 725.782823] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
[ 725.782826] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
[ 725.782865] pciehp 0000:00:1c.7:pcie04: Surprise Removal
[ 725.782895] pciehp 0000:00:1c.7:pcie04: Disabling domain:bus:device=0000:11:00
[ 725.782898] pciehp 0000:00:1c.7:pcie04: pciehp_unconfigure_device: domain:bus:dev = 0000:11:00
[ 725.791556] xhci_hcd 0000:11:00.0: remove, state 4
[ 725.791562] usb usb6: USB disconnect, device number 1
[ 725.791607] xHCI xhci_drop_endpoint called for root hub
[ 725.791609] xHCI xhci_check_bandwidth called for root hub
[ 725.791821] xhci_hcd 0000:11:00.0: Host not halted after 16000 microseconds.
[ 725.791825] xhci_hcd 0000:11:00.0: USB bus 6 deregistered
[ 725.791830] xhci_hcd 0000:11:00.0: remove, state 4
[ 725.791834] usb usb5: USB disconnect, device number 1
[ 725.791871] xHCI xhci_drop_endpoint called for root hub
[ 725.791872] xHCI xhci_check_bandwidth called for root hub
[ 725.792107] xhci_hcd 0000:11:00.0: Host not halted after 16000 microseconds.
[ 725.792188] xhci_hcd 0000:11:00.0: USB bus 5 deregistered
[ 725.792242] pci 0000:11:00.0: freeing pci_dev info
[ 725.799092] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 108
[ 725.799094] pciehp 0000:00:1c.7:pcie04: LinkState change
[ 725.799098] pciehp 0000:00:1c.7:pcie04: lnk_status = 7011
[ 725.799110] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
[ 725.799113] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
[ 725.799118] pciehp 0000:00:1c.7:pcie04: Surprise Removal
[ 725.799128] pciehp 0000:00:1c.7:pcie04: check_link_active: lnk_status = 7011
[ 725.901216] pciehp 0000:00:1c.7:pcie04: pciehp_check_link_status: lnk_status = 7011
[ 725.901322] pci 0000:11:00.0: [1033:0194] type 00 class 0x0c0330
[ 725.901373] pci 0000:11:00.0: reg 10: [mem 0x00000000-0x00001fff 64bit]
[ 725.901617] pci 0000:11:00.0: PME# supported from D0 D3hot
[ 725.921259] pci 0000:11:00.0: BAR 0: assigned [mem 0xf6c00000-0xf6c01fff 64bit]
[ 725.921303] pcieport 0000:00:1c.7: PCI bridge to [bus 11-16]
[ 725.921306] pcieport 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
[ 725.921311] pcieport 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff]
[ 725.921315] pcieport 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
[ 725.921457] xhci_hcd 0000:11:00.0: enabling device (0100 -> 0102)
[ 725.921505] xhci_hcd 0000:11:00.0: xHCI Host Controller
[ 725.921510] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 5
[ 725.921808] xhci_hcd 0000:11:00.0: irq 19, io mem 0xf6c00000
[ 725.921911] xhci_hcd 0000:11:00.0: irq 54 for MSI/MSI-X
[ 725.921914] xhci_hcd 0000:11:00.0: irq 55 for MSI/MSI-X
[ 725.921918] xhci_hcd 0000:11:00.0: irq 56 for MSI/MSI-X
[ 725.921922] xhci_hcd 0000:11:00.0: irq 57 for MSI/MSI-X
[ 725.921926] xhci_hcd 0000:11:00.0: irq 58 for MSI/MSI-X
[ 725.922079] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 725.922081] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 725.922082] usb usb5: Product: xHCI Host Controller
[ 725.922083] usb usb5: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
[ 725.922084] usb usb5: SerialNumber: 0000:11:00.0
[ 725.922208] xHCI xhci_add_endpoint called for root hub
[ 725.922210] xHCI xhci_check_bandwidth called for root hub
[ 725.922233] hub 5-0:1.0: USB hub found
[ 725.922244] hub 5-0:1.0: 2 ports detected
[ 725.922310] xhci_hcd 0000:11:00.0: xHCI Host Controller
[ 725.922312] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 6
[ 725.925042] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[ 725.925045] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 725.925047] usb usb6: Product: xHCI Host Controller
[ 725.925049] usb usb6: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
[ 725.925051] usb usb6: SerialNumber: 0000:11:00.0
[ 725.925168] xHCI xhci_add_endpoint called for root hub
[ 725.925170] xHCI xhci_check_bandwidth called for root hub
[ 725.925203] hub 6-0:1.0: USB hub found
[ 725.925222] hub 6-0:1.0: 2 ports detected
[ 935.028138] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 108
[ 935.028148] pciehp 0000:00:1c.7:pcie04: LinkState change
[ 935.028151] pciehp 0000:00:1c.7:pcie04: lnk_status = 5011
[ 935.028153] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
[ 935.028156] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
[ 935.028187] pciehp 0000:00:1c.7:pcie04: Surprise Removal
[ 935.028217] pciehp 0000:00:1c.7:pcie04: Disabling domain:bus:device=0000:11:00
[ 935.028219] pciehp 0000:00:1c.7:pcie04: pciehp_unconfigure_device: domain:bus:dev = 0000:11:00
[ 935.030143] xhci_hcd 0000:11:00.0: remove, state 4
[ 935.030148] usb usb6: USB disconnect, device number 1
[ 935.030209] xHCI xhci_drop_endpoint called for root hub
[ 935.030211] xHCI xhci_check_bandwidth called for root hub
[ 935.030299] xhci_hcd 0000:11:00.0: Host not halted after 16000 microseconds.
[ 935.030304] xhci_hcd 0000:11:00.0: USB bus 6 deregistered
[ 935.030310] xhci_hcd 0000:11:00.0: remove, state 4
[ 935.030315] usb usb5: USB disconnect, device number 1
[ 935.030351] xHCI xhci_drop_endpoint called for root hub
[ 935.030352] xHCI xhci_check_bandwidth called for root hub
[ 935.030410] xhci_hcd 0000:11:00.0: Host not halted after 16000 microseconds.
[ 935.030498] xhci_hcd 0000:11:00.0: USB bus 5 deregistered
[ 935.030554] pci 0000:11:00.0: freeing pci_dev info
[ 935.043606] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 108
[ 935.043619] pciehp 0000:00:1c.7:pcie04: LinkState change
[ 935.043622] pciehp 0000:00:1c.7:pcie04: lnk_status = 7011
[ 935.043624] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
[ 935.043627] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
[ 935.043632] pciehp 0000:00:1c.7:pcie04: Surprise Removal
[ 935.043645] pciehp 0000:00:1c.7:pcie04: check_link_active: lnk_status = 7011
[ 935.149797] pciehp 0000:00:1c.7:pcie04: pciehp_check_link_status: lnk_status = 7011
[ 935.149890] pci 0000:11:00.0: [1033:0194] type 00 class 0x0c0330
[ 935.149940] pci 0000:11:00.0: reg 10: [mem 0x00000000-0x00001fff 64bit]
[ 935.150193] pci 0000:11:00.0: PME# supported from D0 D3hot
[ 935.169809] pci 0000:11:00.0: BAR 0: assigned [mem 0xf6c00000-0xf6c01fff 64bit]
[ 935.169842] pcieport 0000:00:1c.7: PCI bridge to [bus 11-16]
[ 935.169855] pcieport 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
[ 935.169860] pcieport 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff]
[ 935.169864] pcieport 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
[ 935.170001] xhci_hcd 0000:11:00.0: enabling device (0100 -> 0102)
[ 935.170054] xhci_hcd 0000:11:00.0: xHCI Host Controller
[ 935.170059] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 5
[ 935.170349] xhci_hcd 0000:11:00.0: irq 19, io mem 0xf6c00000
[ 935.170455] xhci_hcd 0000:11:00.0: irq 54 for MSI/MSI-X
[ 935.170469] xhci_hcd 0000:11:00.0: irq 55 for MSI/MSI-X
[ 935.170474] xhci_hcd 0000:11:00.0: irq 56 for MSI/MSI-X
[ 935.170480] xhci_hcd 0000:11:00.0: irq 57 for MSI/MSI-X
[ 935.170486] xhci_hcd 0000:11:00.0: irq 58 for MSI/MSI-X
[ 935.170652] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 935.170654] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 935.170656] usb usb5: Product: xHCI Host Controller
[ 935.170657] usb usb5: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
[ 935.170658] usb usb5: SerialNumber: 0000:11:00.0
[ 935.170720] xHCI xhci_add_endpoint called for root hub
[ 935.170722] xHCI xhci_check_bandwidth called for root hub
[ 935.170742] hub 5-0:1.0: USB hub found
[ 935.170753] hub 5-0:1.0: 2 ports detected
[ 935.170855] xhci_hcd 0000:11:00.0: xHCI Host Controller
[ 935.170860] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 6
[ 935.173587] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[ 935.173589] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 935.173591] usb usb6: Product: xHCI Host Controller
[ 935.173592] usb usb6: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
[ 935.173593] usb usb6: SerialNumber: 0000:11:00.0
[ 935.173657] xHCI xhci_add_endpoint called for root hub
[ 935.173659] xHCI xhci_check_bandwidth called for root hub
[ 935.173678] hub 6-0:1.0: USB hub found
[ 935.173689] hub 6-0:1.0: 2 ports detected
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: 3.2.11: PCI Express card cannot be re-detected withing cca 60sec timeframe
2012-04-20 11:23 ` Martin Mokrejs
@ 2012-04-20 16:01 ` Yinghai Lu
2012-04-20 17:25 ` Martin Mokrejs
0 siblings, 1 reply; 55+ messages in thread
From: Yinghai Lu @ 2012-04-20 16:01 UTC (permalink / raw)
To: Martin Mokrejs; +Cc: Sarah Sharp, linux-pci, Linux Kernel Mailing List
On Fri, Apr 20, 2012 at 4:23 AM, Martin Mokrejs
<mmokrejs@fold.natur.cuni.cz> wrote:
> Yinghai Lu wrote:
>> On Thu, Apr 19, 2012 at 2:48 PM, Yinghai Lu <yinghai@kernel.org> wrote:
>>> On Thu, Apr 19, 2012 at 4:16 PM, Martin Mokrejs
>>>> I just tried something similar under linux, with all the patches I accumulated for 3.4-rc3
>>>> and posted in my previous emails. It seems linux flips some value so on every second card
>>>> removal it really does realize it was just unplugged.
>>>
>>> that is really looks like silicon problem.
>>>
>> please check attached patch. Hope link change bit is flip around...
>> if there is change, we could add some logic:
>> check if the device is there, or will reset link to normal state.
>
> I don't think it helped but maybe you will see some difference:
No, the interrupt still get delayed.
>
> Complete dmesg is attached. OK, the "60sec" delay is when xhci_hcd gives away its attempts.
> I am not knowlegeable of the kernel at all but it is my impression that because of the
> card presence detection there is no way to prevent that. But, if I get it right, now when I
> pluging the card+USB disk in it into the computer before those "60sec" it gets detected,
> so my problem is gone (xhci cancels the timeout because a "new card" was popped in with a "new"
> device.
>
> So, although I am now not sure whether I need your last patch, for the practical purpose that
> I want to plugin a new card with a device into my computer, it works now. (added Sarah Sharp
> into CC: just to make her aware of this scenario, no problem with xhci_hcd in my eyes)
> ;)
please try to "safely remove the card" before removing the card physically like:
echo 1 > /sys/bus/pci/devices/0000:11:00.0/remove
that will stop the drivers and remove pci device in the kernel.
Yinghai
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: 3.2.11: PCI Express card cannot be re-detected withing cca 60sec timeframe
2012-04-20 16:01 ` Yinghai Lu
@ 2012-04-20 17:25 ` Martin Mokrejs
2012-04-20 17:28 ` Martin Mokrejs
0 siblings, 1 reply; 55+ messages in thread
From: Martin Mokrejs @ 2012-04-20 17:25 UTC (permalink / raw)
To: Yinghai Lu
Cc: Martin Mokrejs, Sarah Sharp, linux-pci, Linux Kernel Mailing List
Yinghai Lu wrote:
> On Fri, Apr 20, 2012 at 4:23 AM, Martin Mokrejs
> <mmokrejs@fold.natur.cuni.cz> wrote:
>> Yinghai Lu wrote:
>>> On Thu, Apr 19, 2012 at 2:48 PM, Yinghai Lu <yinghai@kernel.org> wrote:
>>>> On Thu, Apr 19, 2012 at 4:16 PM, Martin Mokrejs
>>>>> I just tried something similar under linux, with all the patches I accumulated for 3.4-rc3
>>>>> and posted in my previous emails. It seems linux flips some value so on every second card
>>>>> removal it really does realize it was just unplugged.
>>>>
>>>> that is really looks like silicon problem.
>>>>
>>> please check attached patch. Hope link change bit is flip around...
>>> if there is change, we could add some logic:
>>> check if the device is there, or will reset link to normal state.
>>
>> I don't think it helped but maybe you will see some difference:
>
> No, the interrupt still get delayed.
>
>>
>> Complete dmesg is attached. OK, the "60sec" delay is when xhci_hcd gives away its attempts.
>> I am not knowlegeable of the kernel at all but it is my impression that because of the
>> card presence detection there is no way to prevent that. But, if I get it right, now when I
>> pluging the card+USB disk in it into the computer before those "60sec" it gets detected,
>> so my problem is gone (xhci cancels the timeout because a "new card" was popped in with a "new"
>> device.
>>
>> So, although I am now not sure whether I need your last patch, for the practical purpose that
>> I want to plugin a new card with a device into my computer, it works now. (added Sarah Sharp
>> into CC: just to make her aware of this scenario, no problem with xhci_hcd in my eyes)
>> ;)
>
> please try to "safely remove the card" before removing the card physically like:
>
> echo 1 > /sys/bus/pci/devices/0000:11:00.0/remove
>
> that will stop the drivers and remove pci device in the kernel.
Aha.
Apr 20 19:23:15 vostro kernel: [30595.322210] pciehp 0000:00:1c.7:pcie04: lnk_status = 5011
Apr 20 19:23:15 vostro kernel: [30595.322215] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
Apr 20 19:23:15 vostro kernel: [30595.329696] xhci_hcd 0000:11:00.0: remove, state 4
Apr 20 19:23:15 vostro kernel: [30595.329705] usb usb6: USB disconnect, device number 1
Apr 20 19:23:15 vostro kernel: [30595.329865] xhci_hcd 0000:11:00.0: Host not halted after 16000 microseconds.
Apr 20 19:23:15 vostro kernel: [30595.329869] xhci_hcd 0000:11:00.0: USB bus 6 deregistered
Apr 20 19:23:15 vostro kernel: [30595.329875] xhci_hcd 0000:11:00.0: remove, state 4
Apr 20 19:23:15 vostro kernel: [30595.329879] usb usb5: USB disconnect, device number 1
Apr 20 19:23:15 vostro kernel: [30595.330071] xhci_hcd 0000:11:00.0: Host not halted after 16000 microseconds.
Apr 20 19:23:15 vostro kernel: [30595.330170] xhci_hcd 0000:11:00.0: USB bus 5 deregistered
Apr 20 19:23:15 vostro kernel: [30595.338471] pciehp 0000:00:1c.7:pcie04: lnk_status = 7011
Apr 20 19:23:15 vostro kernel: [30595.338486] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
Apr 20 19:23:15 vostro kernel: [30595.459499] pci 0000:11:00.0: BAR 0: assigned [mem 0xf6c00000-0xf6c01fff 64bit]
Apr 20 19:23:15 vostro kernel: [30595.459542] pcieport 0000:00:1c.7: PCI bridge to [bus 11-16]
Apr 20 19:23:15 vostro kernel: [30595.459545] pcieport 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
Apr 20 19:23:15 vostro kernel: [30595.459550] pcieport 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff]
Apr 20 19:23:15 vostro kernel: [30595.459554] pcieport 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
Apr 20 19:23:15 vostro kernel: [30595.459688] xhci_hcd 0000:11:00.0: enabling device (0100 -> 0102)
Apr 20 19:23:15 vostro kernel: [30595.459894] xhci_hcd 0000:11:00.0: xHCI Host Controller
Apr 20 19:23:15 vostro kernel: [30595.459900] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 5
Apr 20 19:23:15 vostro kernel: [30595.460199] xhci_hcd 0000:11:00.0: irq 19, io mem 0xf6c00000
Apr 20 19:23:15 vostro kernel: [30595.460472] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
Apr 20 19:23:15 vostro kernel: [30595.460474] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 20 19:23:15 vostro kernel: [30595.460475] usb usb5: Product: xHCI Host Controller
Apr 20 19:23:15 vostro kernel: [30595.460476] usb usb5: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
Apr 20 19:23:15 vostro kernel: [30595.460477] usb usb5: SerialNumber: 0000:11:00.0
Apr 20 19:23:15 vostro kernel: [30595.460600] hub 5-0:1.0: USB hub found
Apr 20 19:23:15 vostro kernel: [30595.460611] hub 5-0:1.0: 2 ports detected
Apr 20 19:23:15 vostro kernel: [30595.460706] xhci_hcd 0000:11:00.0: xHCI Host Controller
Apr 20 19:23:15 vostro kernel: [30595.460711] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 6
Apr 20 19:23:15 vostro kernel: [30595.463431] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
Apr 20 19:23:15 vostro kernel: [30595.463433] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 20 19:23:15 vostro kernel: [30595.463434] usb usb6: Product: xHCI Host Controller
Apr 20 19:23:15 vostro kernel: [30595.463435] usb usb6: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
Apr 20 19:23:15 vostro kernel: [30595.463437] usb usb6: SerialNumber: 0000:11:00.0
Apr 20 19:23:15 vostro kernel: [30595.463534] hub 6-0:1.0: USB hub found
Apr 20 19:23:15 vostro kernel: [30595.463547] hub 6-0:1.0: 2 ports detected
echo 1 > /sys/bus/pci/devices/0000:11:00.0/remove
Apr 20 19:23:27 vostro kernel: [30607.046714] xhci_hcd 0000:11:00.0: remove, state 4
Apr 20 19:23:27 vostro kernel: [30607.046719] usb usb6: USB disconnect, device number 1
Apr 20 19:23:27 vostro kernel: [30607.065341] xhci_hcd 0000:11:00.0: USB bus 6 deregistered
Apr 20 19:23:27 vostro kernel: [30607.065350] xhci_hcd 0000:11:00.0: remove, state 4
Apr 20 19:23:27 vostro kernel: [30607.065353] usb usb5: USB disconnect, device number 1
Apr 20 19:23:27 vostro kernel: [30607.065692] xhci_hcd 0000:11:00.0: USB bus 5 deregistered
removing the card
Apr 20 19:23:36 vostro kernel: [30616.630816] pciehp 0000:00:1c.7:pcie04: lnk_status = 5011
Apr 20 19:23:36 vostro kernel: [30616.630820] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: 3.2.11: PCI Express card cannot be re-detected withing cca 60sec timeframe
2012-04-20 17:25 ` Martin Mokrejs
@ 2012-04-20 17:28 ` Martin Mokrejs
2012-04-20 18:47 ` Yinghai Lu
0 siblings, 1 reply; 55+ messages in thread
From: Martin Mokrejs @ 2012-04-20 17:28 UTC (permalink / raw)
To: Martin Mokrejs
Cc: Yinghai Lu, Sarah Sharp, linux-pci, Linux Kernel Mailing List
Martin Mokrejs wrote:
>
>
> Yinghai Lu wrote:
>> On Fri, Apr 20, 2012 at 4:23 AM, Martin Mokrejs
>> <mmokrejs@fold.natur.cuni.cz> wrote:
>>> Yinghai Lu wrote:
>>>> On Thu, Apr 19, 2012 at 2:48 PM, Yinghai Lu <yinghai@kernel.org> wrote:
>>>>> On Thu, Apr 19, 2012 at 4:16 PM, Martin Mokrejs
>>>>>> I just tried something similar under linux, with all the patches I accumulated for 3.4-rc3
>>>>>> and posted in my previous emails. It seems linux flips some value so on every second card
>>>>>> removal it really does realize it was just unplugged.
>>>>>
>>>>> that is really looks like silicon problem.
>>>>>
>>>> please check attached patch. Hope link change bit is flip around...
>>>> if there is change, we could add some logic:
>>>> check if the device is there, or will reset link to normal state.
>>>
>>> I don't think it helped but maybe you will see some difference:
>>
>> No, the interrupt still get delayed.
>>
>>>
>>> Complete dmesg is attached. OK, the "60sec" delay is when xhci_hcd gives away its attempts.
>>> I am not knowlegeable of the kernel at all but it is my impression that because of the
>>> card presence detection there is no way to prevent that. But, if I get it right, now when I
>>> pluging the card+USB disk in it into the computer before those "60sec" it gets detected,
>>> so my problem is gone (xhci cancels the timeout because a "new card" was popped in with a "new"
>>> device.
>>>
>>> So, although I am now not sure whether I need your last patch, for the practical purpose that
>>> I want to plugin a new card with a device into my computer, it works now. (added Sarah Sharp
>>> into CC: just to make her aware of this scenario, no problem with xhci_hcd in my eyes)
>>> ;)
>>
>> please try to "safely remove the card" before removing the card physically like:
>>
>> echo 1 > /sys/bus/pci/devices/0000:11:00.0/remove
>>
>> that will stop the drivers and remove pci device in the kernel.
>
> Aha.
>
> Apr 20 19:23:15 vostro kernel: [30595.322210] pciehp 0000:00:1c.7:pcie04: lnk_status = 5011
> Apr 20 19:23:15 vostro kernel: [30595.322215] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
> Apr 20 19:23:15 vostro kernel: [30595.329696] xhci_hcd 0000:11:00.0: remove, state 4
> Apr 20 19:23:15 vostro kernel: [30595.329705] usb usb6: USB disconnect, device number 1
> Apr 20 19:23:15 vostro kernel: [30595.329865] xhci_hcd 0000:11:00.0: Host not halted after 16000 microseconds.
> Apr 20 19:23:15 vostro kernel: [30595.329869] xhci_hcd 0000:11:00.0: USB bus 6 deregistered
> Apr 20 19:23:15 vostro kernel: [30595.329875] xhci_hcd 0000:11:00.0: remove, state 4
> Apr 20 19:23:15 vostro kernel: [30595.329879] usb usb5: USB disconnect, device number 1
> Apr 20 19:23:15 vostro kernel: [30595.330071] xhci_hcd 0000:11:00.0: Host not halted after 16000 microseconds.
> Apr 20 19:23:15 vostro kernel: [30595.330170] xhci_hcd 0000:11:00.0: USB bus 5 deregistered
> Apr 20 19:23:15 vostro kernel: [30595.338471] pciehp 0000:00:1c.7:pcie04: lnk_status = 7011
> Apr 20 19:23:15 vostro kernel: [30595.338486] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
> Apr 20 19:23:15 vostro kernel: [30595.459499] pci 0000:11:00.0: BAR 0: assigned [mem 0xf6c00000-0xf6c01fff 64bit]
> Apr 20 19:23:15 vostro kernel: [30595.459542] pcieport 0000:00:1c.7: PCI bridge to [bus 11-16]
> Apr 20 19:23:15 vostro kernel: [30595.459545] pcieport 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
> Apr 20 19:23:15 vostro kernel: [30595.459550] pcieport 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff]
> Apr 20 19:23:15 vostro kernel: [30595.459554] pcieport 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
> Apr 20 19:23:15 vostro kernel: [30595.459688] xhci_hcd 0000:11:00.0: enabling device (0100 -> 0102)
> Apr 20 19:23:15 vostro kernel: [30595.459894] xhci_hcd 0000:11:00.0: xHCI Host Controller
> Apr 20 19:23:15 vostro kernel: [30595.459900] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 5
> Apr 20 19:23:15 vostro kernel: [30595.460199] xhci_hcd 0000:11:00.0: irq 19, io mem 0xf6c00000
> Apr 20 19:23:15 vostro kernel: [30595.460472] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
> Apr 20 19:23:15 vostro kernel: [30595.460474] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> Apr 20 19:23:15 vostro kernel: [30595.460475] usb usb5: Product: xHCI Host Controller
> Apr 20 19:23:15 vostro kernel: [30595.460476] usb usb5: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
> Apr 20 19:23:15 vostro kernel: [30595.460477] usb usb5: SerialNumber: 0000:11:00.0
> Apr 20 19:23:15 vostro kernel: [30595.460600] hub 5-0:1.0: USB hub found
> Apr 20 19:23:15 vostro kernel: [30595.460611] hub 5-0:1.0: 2 ports detected
> Apr 20 19:23:15 vostro kernel: [30595.460706] xhci_hcd 0000:11:00.0: xHCI Host Controller
> Apr 20 19:23:15 vostro kernel: [30595.460711] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 6
> Apr 20 19:23:15 vostro kernel: [30595.463431] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
> Apr 20 19:23:15 vostro kernel: [30595.463433] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> Apr 20 19:23:15 vostro kernel: [30595.463434] usb usb6: Product: xHCI Host Controller
> Apr 20 19:23:15 vostro kernel: [30595.463435] usb usb6: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
> Apr 20 19:23:15 vostro kernel: [30595.463437] usb usb6: SerialNumber: 0000:11:00.0
> Apr 20 19:23:15 vostro kernel: [30595.463534] hub 6-0:1.0: USB hub found
> Apr 20 19:23:15 vostro kernel: [30595.463547] hub 6-0:1.0: 2 ports detected
>
> echo 1 > /sys/bus/pci/devices/0000:11:00.0/remove
>
> Apr 20 19:23:27 vostro kernel: [30607.046714] xhci_hcd 0000:11:00.0: remove, state 4
> Apr 20 19:23:27 vostro kernel: [30607.046719] usb usb6: USB disconnect, device number 1
> Apr 20 19:23:27 vostro kernel: [30607.065341] xhci_hcd 0000:11:00.0: USB bus 6 deregistered
> Apr 20 19:23:27 vostro kernel: [30607.065350] xhci_hcd 0000:11:00.0: remove, state 4
> Apr 20 19:23:27 vostro kernel: [30607.065353] usb usb5: USB disconnect, device number 1
> Apr 20 19:23:27 vostro kernel: [30607.065692] xhci_hcd 0000:11:00.0: USB bus 5 deregistered
>
> removing the card
>
> Apr 20 19:23:36 vostro kernel: [30616.630816] pciehp 0000:00:1c.7:pcie04: lnk_status = 5011
> Apr 20 19:23:36 vostro kernel: [30616.630820] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
>
>
Sorry, I forgot to add parts of the dmesg for the above:
[30595.322205] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 108
[30595.322207] pciehp 0000:00:1c.7:pcie04: LinkState change
[30595.322210] pciehp 0000:00:1c.7:pcie04: lnk_status = 5011
[30595.322212] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
[30595.322215] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
[30595.322253] pciehp 0000:00:1c.7:pcie04: Surprise Removal
[30595.322283] pciehp 0000:00:1c.7:pcie04: Disabling domain:bus:device=0000:11:00
[30595.322286] pciehp 0000:00:1c.7:pcie04: pciehp_unconfigure_device: domain:bus:dev = 0000:11:00
[30595.329696] xhci_hcd 0000:11:00.0: remove, state 4
[30595.329705] usb usb6: USB disconnect, device number 1
[30595.329782] xHCI xhci_drop_endpoint called for root hub
[30595.329784] xHCI xhci_check_bandwidth called for root hub
[30595.329865] xhci_hcd 0000:11:00.0: Host not halted after 16000 microseconds.
[30595.329869] xhci_hcd 0000:11:00.0: USB bus 6 deregistered
[30595.329875] xhci_hcd 0000:11:00.0: remove, state 4
[30595.329879] usb usb5: USB disconnect, device number 1
[30595.329921] xHCI xhci_drop_endpoint called for root hub
[30595.329922] xHCI xhci_check_bandwidth called for root hub
[30595.330071] xhci_hcd 0000:11:00.0: Host not halted after 16000 microseconds.
[30595.330170] xhci_hcd 0000:11:00.0: USB bus 5 deregistered
[30595.330227] pci 0000:11:00.0: freeing pci_dev info
[30595.338466] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 108
[30595.338468] pciehp 0000:00:1c.7:pcie04: LinkState change
[30595.338471] pciehp 0000:00:1c.7:pcie04: lnk_status = 7011
[30595.338483] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
[30595.338486] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
[30595.338491] pciehp 0000:00:1c.7:pcie04: Surprise Removal
[30595.338525] pciehp 0000:00:1c.7:pcie04: check_link_active: lnk_status = 7011
[30595.439441] pciehp 0000:00:1c.7:pcie04: pciehp_check_link_status: lnk_status = 7011
[30595.439543] pci 0000:11:00.0: [1033:0194] type 00 class 0x0c0330
[30595.439597] pci 0000:11:00.0: reg 10: [mem 0x00000000-0x00001fff 64bit]
[30595.439840] pci 0000:11:00.0: PME# supported from D0 D3hot
[30595.459499] pci 0000:11:00.0: BAR 0: assigned [mem 0xf6c00000-0xf6c01fff 64bit]
[30595.459542] pcieport 0000:00:1c.7: PCI bridge to [bus 11-16]
[30595.459545] pcieport 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
[30595.459550] pcieport 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff]
[30595.459554] pcieport 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
[30595.459688] xhci_hcd 0000:11:00.0: enabling device (0100 -> 0102)
[30595.459894] xhci_hcd 0000:11:00.0: xHCI Host Controller
[30595.459900] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 5
[30595.460199] xhci_hcd 0000:11:00.0: irq 19, io mem 0xf6c00000
[30595.460306] xhci_hcd 0000:11:00.0: irq 54 for MSI/MSI-X
[30595.460310] xhci_hcd 0000:11:00.0: irq 55 for MSI/MSI-X
[30595.460314] xhci_hcd 0000:11:00.0: irq 56 for MSI/MSI-X
[30595.460318] xhci_hcd 0000:11:00.0: irq 57 for MSI/MSI-X
[30595.460321] xhci_hcd 0000:11:00.0: irq 58 for MSI/MSI-X
[30595.460472] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[30595.460474] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[30595.460475] usb usb5: Product: xHCI Host Controller
[30595.460476] usb usb5: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
[30595.460477] usb usb5: SerialNumber: 0000:11:00.0
[30595.460569] xHCI xhci_add_endpoint called for root hub
[30595.460579] xHCI xhci_check_bandwidth called for root hub
[30595.460600] hub 5-0:1.0: USB hub found
[30595.460611] hub 5-0:1.0: 2 ports detected
[30595.460706] xhci_hcd 0000:11:00.0: xHCI Host Controller
[30595.460711] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 6
[30595.463431] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[30595.463433] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[30595.463434] usb usb6: Product: xHCI Host Controller
[30595.463435] usb usb6: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
[30595.463437] usb usb6: SerialNumber: 0000:11:00.0
[30595.463506] xHCI xhci_add_endpoint called for root hub
[30595.463507] xHCI xhci_check_bandwidth called for root hub
[30595.463534] hub 6-0:1.0: USB hub found
[30595.463547] hub 6-0:1.0: 2 ports detected
[30607.046714] xhci_hcd 0000:11:00.0: remove, state 4
[30607.046719] usb usb6: USB disconnect, device number 1
[30607.046764] xHCI xhci_drop_endpoint called for root hub
[30607.046766] xHCI xhci_check_bandwidth called for root hub
[30607.065341] xhci_hcd 0000:11:00.0: USB bus 6 deregistered
[30607.065350] xhci_hcd 0000:11:00.0: remove, state 4
[30607.065353] usb usb5: USB disconnect, device number 1
[30607.065393] xHCI xhci_drop_endpoint called for root hub
[30607.065394] xHCI xhci_check_bandwidth called for root hub
[30607.065692] xhci_hcd 0000:11:00.0: USB bus 5 deregistered
[30607.065764] pci 0000:11:00.0: freeing pci_dev info
[30616.630810] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 108
[30616.630813] pciehp 0000:00:1c.7:pcie04: LinkState change
[30616.630816] pciehp 0000:00:1c.7:pcie04: lnk_status = 5011
[30616.630817] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
[30616.630820] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
[30616.630858] pciehp 0000:00:1c.7:pcie04: Surprise Removal
[30616.630888] pciehp 0000:00:1c.7:pcie04: Disabling domain:bus:device=0000:11:00
[30616.630891] pciehp 0000:00:1c.7:pcie04: pciehp_unconfigure_device: domain:bus:dev = 0000:11:00
[30708.233725] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 108
[30708.233727] pciehp 0000:00:1c.7:pcie04: LinkState change
[30708.233738] pciehp 0000:00:1c.7:pcie04: lnk_status = 7011
[30708.233739] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
[30708.233742] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
[30708.233781] pciehp 0000:00:1c.7:pcie04: Surprise Removal
[30708.233796] pciehp 0000:00:1c.7:pcie04: check_link_active: lnk_status = 7011
[30708.338477] pciehp 0000:00:1c.7:pcie04: pciehp_check_link_status: lnk_status = 7011
[30708.338581] pci 0000:11:00.0: [1033:0194] type 00 class 0x0c0330
[30708.338632] pci 0000:11:00.0: reg 10: [mem 0x00000000-0x00001fff 64bit]
[30708.338876] pci 0000:11:00.0: PME# supported from D0 D3hot
[30708.358538] pci 0000:11:00.0: BAR 0: assigned [mem 0xf6c00000-0xf6c01fff 64bit]
[30708.358575] pcieport 0000:00:1c.7: PCI bridge to [bus 11-16]
[30708.358588] pcieport 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
[30708.358593] pcieport 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff]
[30708.358597] pcieport 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
[30708.358737] xhci_hcd 0000:11:00.0: enabling device (0100 -> 0102)
[30708.358791] xhci_hcd 0000:11:00.0: xHCI Host Controller
[30708.358799] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 5
[30708.359090] xhci_hcd 0000:11:00.0: irq 19, io mem 0xf6c00000
[30708.359192] xhci_hcd 0000:11:00.0: irq 54 for MSI/MSI-X
[30708.359196] xhci_hcd 0000:11:00.0: irq 55 for MSI/MSI-X
[30708.359199] xhci_hcd 0000:11:00.0: irq 56 for MSI/MSI-X
[30708.359203] xhci_hcd 0000:11:00.0: irq 57 for MSI/MSI-X
[30708.359207] xhci_hcd 0000:11:00.0: irq 58 for MSI/MSI-X
[30708.359357] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[30708.359359] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[30708.359360] usb usb5: Product: xHCI Host Controller
[30708.359361] usb usb5: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
[30708.359363] usb usb5: SerialNumber: 0000:11:00.0
[30708.359453] xHCI xhci_add_endpoint called for root hub
[30708.359456] xHCI xhci_check_bandwidth called for root hub
[30708.359496] hub 5-0:1.0: USB hub found
[30708.359509] hub 5-0:1.0: 2 ports detected
[30708.359571] xhci_hcd 0000:11:00.0: xHCI Host Controller
[30708.359574] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 6
[30708.362332] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[30708.362335] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[30708.362337] usb usb6: Product: xHCI Host Controller
[30708.362338] usb usb6: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
[30708.362340] usb usb6: SerialNumber: 0000:11:00.0
[30708.362443] xHCI xhci_add_endpoint called for root hub
[30708.362445] xHCI xhci_check_bandwidth called for root hub
[30708.362472] hub 6-0:1.0: USB hub found
[30708.362490] hub 6-0:1.0: 2 ports detected
[30716.380693] xhci_hcd 0000:11:00.0: remove, state 4
[30716.380699] usb usb6: USB disconnect, device number 1
[30716.380752] xHCI xhci_drop_endpoint called for root hub
[30716.380754] xHCI xhci_check_bandwidth called for root hub
[30716.400795] xhci_hcd 0000:11:00.0: USB bus 6 deregistered
[30716.400803] xhci_hcd 0000:11:00.0: remove, state 4
[30716.400807] usb usb5: USB disconnect, device number 1
[30716.400846] xHCI xhci_drop_endpoint called for root hub
[30716.400848] xHCI xhci_check_bandwidth called for root hub
[30716.401134] xhci_hcd 0000:11:00.0: USB bus 5 deregistered
[30716.401207] pci 0000:11:00.0: freeing pci_dev info
[30720.175637] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 108
[30720.175639] pciehp 0000:00:1c.7:pcie04: LinkState change
[30720.175643] pciehp 0000:00:1c.7:pcie04: lnk_status = 5011
[30720.175644] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
[30720.175648] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
[30720.175687] pciehp 0000:00:1c.7:pcie04: Surprise Removal
[30720.175718] pciehp 0000:00:1c.7:pcie04: Disabling domain:bus:device=0000:11:00
[30720.175721] pciehp 0000:00:1c.7:pcie04: pciehp_unconfigure_device: domain:bus:dev = 0000:11:00
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: 3.2.11: PCI Express card cannot be re-detected withing cca 60sec timeframe
2012-04-20 17:28 ` Martin Mokrejs
@ 2012-04-20 18:47 ` Yinghai Lu
2012-04-20 23:17 ` Sarah Sharp
` (2 more replies)
0 siblings, 3 replies; 55+ messages in thread
From: Yinghai Lu @ 2012-04-20 18:47 UTC (permalink / raw)
To: Martin Mokrejs; +Cc: Sarah Sharp, linux-pci, Linux Kernel Mailing List
On Fri, Apr 20, 2012 at 10:28 AM, Martin Mokrejs
<mmokrejs@fold.natur.cuni.cz> wrote:
>
>
> [30595.338466] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 108
> [30595.338468] pciehp 0000:00:1c.7:pcie04: LinkState change
> [30595.338471] pciehp 0000:00:1c.7:pcie04: lnk_status = 7011
> [30595.338483] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
> [30595.338486] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
> [30595.338491] pciehp 0000:00:1c.7:pcie04: Surprise Removal
> [30595.338525] pciehp 0000:00:1c.7:pcie04: check_link_active: lnk_status = 7011
> [30595.439441] pciehp 0000:00:1c.7:pcie04: pciehp_check_link_status: lnk_status = 7011
> [30595.439543] pci 0000:11:00.0: [1033:0194] type 00 class 0x0c0330
> [30595.439597] pci 0000:11:00.0: reg 10: [mem 0x00000000-0x00001fff 64bit]
> [30595.439840] pci 0000:11:00.0: PME# supported from D0 D3hot
> [30595.459499] pci 0000:11:00.0: BAR 0: assigned [mem 0xf6c00000-0xf6c01fff 64bit]
> [30595.459542] pcieport 0000:00:1c.7: PCI bridge to [bus 11-16]
> [30595.459545] pcieport 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
> [30595.459550] pcieport 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff]
> [30595.459554] pcieport 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
> [30595.459688] xhci_hcd 0000:11:00.0: enabling device (0100 -> 0102)
> [30595.459894] xhci_hcd 0000:11:00.0: xHCI Host Controller
> [30595.459900] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 5
> [30595.460199] xhci_hcd 0000:11:00.0: irq 19, io mem 0xf6c00000
> [30595.460306] xhci_hcd 0000:11:00.0: irq 54 for MSI/MSI-X
> [30595.460310] xhci_hcd 0000:11:00.0: irq 55 for MSI/MSI-X
> [30595.460314] xhci_hcd 0000:11:00.0: irq 56 for MSI/MSI-X
> [30595.460318] xhci_hcd 0000:11:00.0: irq 57 for MSI/MSI-X
> [30595.460321] xhci_hcd 0000:11:00.0: irq 58 for MSI/MSI-X
> [30595.460472] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
> [30595.460474] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [30595.460475] usb usb5: Product: xHCI Host Controller
> [30595.460476] usb usb5: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
> [30595.460477] usb usb5: SerialNumber: 0000:11:00.0
> [30595.460569] xHCI xhci_add_endpoint called for root hub
> [30595.460579] xHCI xhci_check_bandwidth called for root hub
> [30595.460600] hub 5-0:1.0: USB hub found
> [30595.460611] hub 5-0:1.0: 2 ports detected
> [30595.460706] xhci_hcd 0000:11:00.0: xHCI Host Controller
> [30595.460711] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 6
> [30595.463431] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
> [30595.463433] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [30595.463434] usb usb6: Product: xHCI Host Controller
> [30595.463435] usb usb6: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
> [30595.463437] usb usb6: SerialNumber: 0000:11:00.0
> [30595.463506] xHCI xhci_add_endpoint called for root hub
> [30595.463507] xHCI xhci_check_bandwidth called for root hub
> [30595.463534] hub 6-0:1.0: USB hub found
> [30595.463547] hub 6-0:1.0: 2 ports detected
echo 1 > /sys/..../remove
> [30607.046714] xhci_hcd 0000:11:00.0: remove, state 4
> [30607.046719] usb usb6: USB disconnect, device number 1
> [30607.046764] xHCI xhci_drop_endpoint called for root hub
> [30607.046766] xHCI xhci_check_bandwidth called for root hub
> [30607.065341] xhci_hcd 0000:11:00.0: USB bus 6 deregistered
> [30607.065350] xhci_hcd 0000:11:00.0: remove, state 4
> [30607.065353] usb usb5: USB disconnect, device number 1
> [30607.065393] xHCI xhci_drop_endpoint called for root hub
> [30607.065394] xHCI xhci_check_bandwidth called for root hub
> [30607.065692] xhci_hcd 0000:11:00.0: USB bus 5 deregistered
> [30607.065764] pci 0000:11:00.0: freeing pci_dev info
physically remove that express card
> [30616.630810] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 108
> [30616.630813] pciehp 0000:00:1c.7:pcie04: LinkState change
> [30616.630816] pciehp 0000:00:1c.7:pcie04: lnk_status = 5011
> [30616.630817] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
> [30616.630820] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
> [30616.630858] pciehp 0000:00:1c.7:pcie04: Surprise Removal
> [30616.630888] pciehp 0000:00:1c.7:pcie04: Disabling domain:bus:device=0000:11:00
> [30616.630891] pciehp 0000:00:1c.7:pcie04: pciehp_unconfigure_device: domain:bus:dev = 0000:11:00
physical add...
> [30708.233725] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 108
> [30708.233727] pciehp 0000:00:1c.7:pcie04: LinkState change
> [30708.233738] pciehp 0000:00:1c.7:pcie04: lnk_status = 7011
> [30708.233739] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
> [30708.233742] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
> [30708.233781] pciehp 0000:00:1c.7:pcie04: Surprise Removal
> [30708.233796] pciehp 0000:00:1c.7:pcie04: check_link_active: lnk_status = 7011
> [30708.338477] pciehp 0000:00:1c.7:pcie04: pciehp_check_link_status: lnk_status = 7011
> [30708.338581] pci 0000:11:00.0: [1033:0194] type 00 class 0x0c0330
> [30708.338632] pci 0000:11:00.0: reg 10: [mem 0x00000000-0x00001fff 64bit]
> [30708.338876] pci 0000:11:00.0: PME# supported from D0 D3hot
> [30708.358538] pci 0000:11:00.0: BAR 0: assigned [mem 0xf6c00000-0xf6c01fff 64bit]
> [30708.358575] pcieport 0000:00:1c.7: PCI bridge to [bus 11-16]
> [30708.358588] pcieport 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
> [30708.358593] pcieport 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff]
> [30708.358597] pcieport 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
> [30708.358737] xhci_hcd 0000:11:00.0: enabling device (0100 -> 0102)
> [30708.358791] xhci_hcd 0000:11:00.0: xHCI Host Controller
> [30708.358799] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 5
> [30708.359090] xhci_hcd 0000:11:00.0: irq 19, io mem 0xf6c00000
> [30708.359192] xhci_hcd 0000:11:00.0: irq 54 for MSI/MSI-X
> [30708.359196] xhci_hcd 0000:11:00.0: irq 55 for MSI/MSI-X
> [30708.359199] xhci_hcd 0000:11:00.0: irq 56 for MSI/MSI-X
> [30708.359203] xhci_hcd 0000:11:00.0: irq 57 for MSI/MSI-X
> [30708.359207] xhci_hcd 0000:11:00.0: irq 58 for MSI/MSI-X
> [30708.359357] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
> [30708.359359] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [30708.359360] usb usb5: Product: xHCI Host Controller
> [30708.359361] usb usb5: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
> [30708.359363] usb usb5: SerialNumber: 0000:11:00.0
> [30708.359453] xHCI xhci_add_endpoint called for root hub
> [30708.359456] xHCI xhci_check_bandwidth called for root hub
> [30708.359496] hub 5-0:1.0: USB hub found
> [30708.359509] hub 5-0:1.0: 2 ports detected
> [30708.359571] xhci_hcd 0000:11:00.0: xHCI Host Controller
> [30708.359574] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 6
> [30708.362332] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
> [30708.362335] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [30708.362337] usb usb6: Product: xHCI Host Controller
> [30708.362338] usb usb6: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
> [30708.362340] usb usb6: SerialNumber: 0000:11:00.0
> [30708.362443] xHCI xhci_add_endpoint called for root hub
> [30708.362445] xHCI xhci_check_bandwidth called for root hub
> [30708.362472] hub 6-0:1.0: USB hub found
> [30708.362490] hub 6-0:1.0: 2 ports detected
echo 1 /sys/.../remove
> [30716.380693] xhci_hcd 0000:11:00.0: remove, state 4
> [30716.380699] usb usb6: USB disconnect, device number 1
> [30716.380752] xHCI xhci_drop_endpoint called for root hub
> [30716.380754] xHCI xhci_check_bandwidth called for root hub
> [30716.400795] xhci_hcd 0000:11:00.0: USB bus 6 deregistered
> [30716.400803] xhci_hcd 0000:11:00.0: remove, state 4
> [30716.400807] usb usb5: USB disconnect, device number 1
> [30716.400846] xHCI xhci_drop_endpoint called for root hub
> [30716.400848] xHCI xhci_check_bandwidth called for root hub
> [30716.401134] xhci_hcd 0000:11:00.0: USB bus 5 deregistered
> [30716.401207] pci 0000:11:00.0: freeing pci_dev info
physically remove
> [30720.175637] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 108
> [30720.175639] pciehp 0000:00:1c.7:pcie04: LinkState change
> [30720.175643] pciehp 0000:00:1c.7:pcie04: lnk_status = 5011
> [30720.175644] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
> [30720.175648] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
> [30720.175687] pciehp 0000:00:1c.7:pcie04: Surprise Removal
> [30720.175718] pciehp 0000:00:1c.7:pcie04: Disabling domain:bus:device=0000:11:00
> [30720.175721] pciehp 0000:00:1c.7:pcie04: pciehp_unconfigure_device: domain:bus:dev = 0000:11:00
>
So the USB host control driver xhci put that 11:00.0 in strange power state.
please try to boot the system with pcie_aspm=off
and don't use echo 1 before physically removing the expresscard.
Yinghai
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: 3.2.11: PCI Express card cannot be re-detected withing cca 60sec timeframe
2012-04-20 18:47 ` Yinghai Lu
@ 2012-04-20 23:17 ` Sarah Sharp
2012-04-21 0:09 ` Yinghai Lu
2012-04-20 23:50 ` Martin Mokrejs
2012-05-04 16:16 ` Martin Mokrejs
2 siblings, 1 reply; 55+ messages in thread
From: Sarah Sharp @ 2012-04-20 23:17 UTC (permalink / raw)
To: Yinghai Lu; +Cc: Martin Mokrejs, linux-pci, Linux Kernel Mailing List
On Fri, Apr 20, 2012 at 11:47:14AM -0700, Yinghai Lu wrote:
> On Fri, Apr 20, 2012 at 10:28 AM, Martin Mokrejs
> <mmokrejs@fold.natur.cuni.cz> wrote:
> > [30720.175637] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 108
> > [30720.175639] pciehp 0000:00:1c.7:pcie04: LinkState change
> > [30720.175643] pciehp 0000:00:1c.7:pcie04: lnk_status = 5011
> > [30720.175644] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
> > [30720.175648] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
> > [30720.175687] pciehp 0000:00:1c.7:pcie04: Surprise Removal
> > [30720.175718] pciehp 0000:00:1c.7:pcie04: Disabling domain:bus:device=0000:11:00
> > [30720.175721] pciehp 0000:00:1c.7:pcie04: pciehp_unconfigure_device: domain:bus:dev = 0000:11:00
> >
>
> So the USB host control driver xhci put that 11:00.0 in strange power state.
What do you mean "strange power state"? The only PCI power states the
xHCI driver will use is D0 or D3hot. D3hot is entered automatically by
the USB core runtime PM system when all USB devices are disconnected or
suspended. So what strange power state are we talking about?
> please try to boot the system with pcie_aspm=off
>
> and don't use echo 1 before physically removing the expresscard.
>
> Yinghai
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: 3.2.11: PCI Express card cannot be re-detected withing cca 60sec timeframe
2012-04-20 18:47 ` Yinghai Lu
2012-04-20 23:17 ` Sarah Sharp
@ 2012-04-20 23:50 ` Martin Mokrejs
2012-04-21 0:04 ` Yinghai Lu
2012-05-04 16:16 ` Martin Mokrejs
2 siblings, 1 reply; 55+ messages in thread
From: Martin Mokrejs @ 2012-04-20 23:50 UTC (permalink / raw)
To: Yinghai Lu; +Cc: Sarah Sharp, linux-pci, Linux Kernel Mailing List
[-- Attachment #1: Type: text/plain, Size: 14811 bytes --]
Yinghai Lu wrote:
> On Fri, Apr 20, 2012 at 10:28 AM, Martin Mokrejs
> <mmokrejs@fold.natur.cuni.cz> wrote:
>>
>>
>> [30595.338466] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 108
>> [30595.338468] pciehp 0000:00:1c.7:pcie04: LinkState change
>> [30595.338471] pciehp 0000:00:1c.7:pcie04: lnk_status = 7011
>> [30595.338483] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
>> [30595.338486] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
>> [30595.338491] pciehp 0000:00:1c.7:pcie04: Surprise Removal
>> [30595.338525] pciehp 0000:00:1c.7:pcie04: check_link_active: lnk_status = 7011
>> [30595.439441] pciehp 0000:00:1c.7:pcie04: pciehp_check_link_status: lnk_status = 7011
>> [30595.439543] pci 0000:11:00.0: [1033:0194] type 00 class 0x0c0330
>> [30595.439597] pci 0000:11:00.0: reg 10: [mem 0x00000000-0x00001fff 64bit]
>> [30595.439840] pci 0000:11:00.0: PME# supported from D0 D3hot
>> [30595.459499] pci 0000:11:00.0: BAR 0: assigned [mem 0xf6c00000-0xf6c01fff 64bit]
>> [30595.459542] pcieport 0000:00:1c.7: PCI bridge to [bus 11-16]
>> [30595.459545] pcieport 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
>> [30595.459550] pcieport 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff]
>> [30595.459554] pcieport 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
>> [30595.459688] xhci_hcd 0000:11:00.0: enabling device (0100 -> 0102)
>> [30595.459894] xhci_hcd 0000:11:00.0: xHCI Host Controller
>> [30595.459900] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 5
>> [30595.460199] xhci_hcd 0000:11:00.0: irq 19, io mem 0xf6c00000
>> [30595.460306] xhci_hcd 0000:11:00.0: irq 54 for MSI/MSI-X
>> [30595.460310] xhci_hcd 0000:11:00.0: irq 55 for MSI/MSI-X
>> [30595.460314] xhci_hcd 0000:11:00.0: irq 56 for MSI/MSI-X
>> [30595.460318] xhci_hcd 0000:11:00.0: irq 57 for MSI/MSI-X
>> [30595.460321] xhci_hcd 0000:11:00.0: irq 58 for MSI/MSI-X
>> [30595.460472] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
>> [30595.460474] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>> [30595.460475] usb usb5: Product: xHCI Host Controller
>> [30595.460476] usb usb5: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
>> [30595.460477] usb usb5: SerialNumber: 0000:11:00.0
>> [30595.460569] xHCI xhci_add_endpoint called for root hub
>> [30595.460579] xHCI xhci_check_bandwidth called for root hub
>> [30595.460600] hub 5-0:1.0: USB hub found
>> [30595.460611] hub 5-0:1.0: 2 ports detected
>> [30595.460706] xhci_hcd 0000:11:00.0: xHCI Host Controller
>> [30595.460711] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 6
>> [30595.463431] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
>> [30595.463433] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>> [30595.463434] usb usb6: Product: xHCI Host Controller
>> [30595.463435] usb usb6: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
>> [30595.463437] usb usb6: SerialNumber: 0000:11:00.0
>> [30595.463506] xHCI xhci_add_endpoint called for root hub
>> [30595.463507] xHCI xhci_check_bandwidth called for root hub
>> [30595.463534] hub 6-0:1.0: USB hub found
>> [30595.463547] hub 6-0:1.0: 2 ports detected
>
> echo 1 > /sys/..../remove
>
>> [30607.046714] xhci_hcd 0000:11:00.0: remove, state 4
>> [30607.046719] usb usb6: USB disconnect, device number 1
>> [30607.046764] xHCI xhci_drop_endpoint called for root hub
>> [30607.046766] xHCI xhci_check_bandwidth called for root hub
>> [30607.065341] xhci_hcd 0000:11:00.0: USB bus 6 deregistered
>> [30607.065350] xhci_hcd 0000:11:00.0: remove, state 4
>> [30607.065353] usb usb5: USB disconnect, device number 1
>> [30607.065393] xHCI xhci_drop_endpoint called for root hub
>> [30607.065394] xHCI xhci_check_bandwidth called for root hub
>> [30607.065692] xhci_hcd 0000:11:00.0: USB bus 5 deregistered
>> [30607.065764] pci 0000:11:00.0: freeing pci_dev info
>
> physically remove that express card
>
>> [30616.630810] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 108
>> [30616.630813] pciehp 0000:00:1c.7:pcie04: LinkState change
>> [30616.630816] pciehp 0000:00:1c.7:pcie04: lnk_status = 5011
>> [30616.630817] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
>> [30616.630820] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
>> [30616.630858] pciehp 0000:00:1c.7:pcie04: Surprise Removal
>> [30616.630888] pciehp 0000:00:1c.7:pcie04: Disabling domain:bus:device=0000:11:00
>> [30616.630891] pciehp 0000:00:1c.7:pcie04: pciehp_unconfigure_device: domain:bus:dev = 0000:11:00
>
> physical add...
>
>> [30708.233725] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 108
>> [30708.233727] pciehp 0000:00:1c.7:pcie04: LinkState change
>> [30708.233738] pciehp 0000:00:1c.7:pcie04: lnk_status = 7011
>> [30708.233739] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
>> [30708.233742] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
>> [30708.233781] pciehp 0000:00:1c.7:pcie04: Surprise Removal
>> [30708.233796] pciehp 0000:00:1c.7:pcie04: check_link_active: lnk_status = 7011
>> [30708.338477] pciehp 0000:00:1c.7:pcie04: pciehp_check_link_status: lnk_status = 7011
>> [30708.338581] pci 0000:11:00.0: [1033:0194] type 00 class 0x0c0330
>> [30708.338632] pci 0000:11:00.0: reg 10: [mem 0x00000000-0x00001fff 64bit]
>> [30708.338876] pci 0000:11:00.0: PME# supported from D0 D3hot
>> [30708.358538] pci 0000:11:00.0: BAR 0: assigned [mem 0xf6c00000-0xf6c01fff 64bit]
>> [30708.358575] pcieport 0000:00:1c.7: PCI bridge to [bus 11-16]
>> [30708.358588] pcieport 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
>> [30708.358593] pcieport 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff]
>> [30708.358597] pcieport 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
>> [30708.358737] xhci_hcd 0000:11:00.0: enabling device (0100 -> 0102)
>> [30708.358791] xhci_hcd 0000:11:00.0: xHCI Host Controller
>> [30708.358799] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 5
>> [30708.359090] xhci_hcd 0000:11:00.0: irq 19, io mem 0xf6c00000
>> [30708.359192] xhci_hcd 0000:11:00.0: irq 54 for MSI/MSI-X
>> [30708.359196] xhci_hcd 0000:11:00.0: irq 55 for MSI/MSI-X
>> [30708.359199] xhci_hcd 0000:11:00.0: irq 56 for MSI/MSI-X
>> [30708.359203] xhci_hcd 0000:11:00.0: irq 57 for MSI/MSI-X
>> [30708.359207] xhci_hcd 0000:11:00.0: irq 58 for MSI/MSI-X
>> [30708.359357] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
>> [30708.359359] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>> [30708.359360] usb usb5: Product: xHCI Host Controller
>> [30708.359361] usb usb5: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
>> [30708.359363] usb usb5: SerialNumber: 0000:11:00.0
>> [30708.359453] xHCI xhci_add_endpoint called for root hub
>> [30708.359456] xHCI xhci_check_bandwidth called for root hub
>> [30708.359496] hub 5-0:1.0: USB hub found
>> [30708.359509] hub 5-0:1.0: 2 ports detected
>> [30708.359571] xhci_hcd 0000:11:00.0: xHCI Host Controller
>> [30708.359574] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 6
>> [30708.362332] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
>> [30708.362335] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>> [30708.362337] usb usb6: Product: xHCI Host Controller
>> [30708.362338] usb usb6: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
>> [30708.362340] usb usb6: SerialNumber: 0000:11:00.0
>> [30708.362443] xHCI xhci_add_endpoint called for root hub
>> [30708.362445] xHCI xhci_check_bandwidth called for root hub
>> [30708.362472] hub 6-0:1.0: USB hub found
>> [30708.362490] hub 6-0:1.0: 2 ports detected
>
> echo 1 /sys/.../remove
>
>> [30716.380693] xhci_hcd 0000:11:00.0: remove, state 4
>> [30716.380699] usb usb6: USB disconnect, device number 1
>> [30716.380752] xHCI xhci_drop_endpoint called for root hub
>> [30716.380754] xHCI xhci_check_bandwidth called for root hub
>> [30716.400795] xhci_hcd 0000:11:00.0: USB bus 6 deregistered
>> [30716.400803] xhci_hcd 0000:11:00.0: remove, state 4
>> [30716.400807] usb usb5: USB disconnect, device number 1
>> [30716.400846] xHCI xhci_drop_endpoint called for root hub
>> [30716.400848] xHCI xhci_check_bandwidth called for root hub
>> [30716.401134] xhci_hcd 0000:11:00.0: USB bus 5 deregistered
>> [30716.401207] pci 0000:11:00.0: freeing pci_dev info
>
> physically remove
>
>> [30720.175637] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 108
>> [30720.175639] pciehp 0000:00:1c.7:pcie04: LinkState change
>> [30720.175643] pciehp 0000:00:1c.7:pcie04: lnk_status = 5011
>> [30720.175644] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
>> [30720.175648] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
>> [30720.175687] pciehp 0000:00:1c.7:pcie04: Surprise Removal
>> [30720.175718] pciehp 0000:00:1c.7:pcie04: Disabling domain:bus:device=0000:11:00
>> [30720.175721] pciehp 0000:00:1c.7:pcie04: pciehp_unconfigure_device: domain:bus:dev = 0000:11:00
>>
>
> So the USB host control driver xhci put that 11:00.0 in strange power state.
>
> please try to boot the system with pcie_aspm=off
>
> and don't use echo 1 before physically removing the expresscard.
inserting
Apr 21 01:38:03 vostro kernel: [ 166.843165] pci 0000:11:00.0: BAR 0: assigned [mem 0xf6c00000-0xf6c01fff 64bit]
Apr 21 01:38:03 vostro kernel: [ 166.843272] xhci_hcd 0000:11:00.0: enabling device (0100 -> 0102)
Apr 21 01:38:03 vostro kernel: [ 166.843329] xhci_hcd 0000:11:00.0: xHCI Host Controller
Apr 21 01:38:03 vostro kernel: [ 166.843335] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 5
Apr 21 01:38:03 vostro kernel: [ 166.843637] xhci_hcd 0000:11:00.0: irq 19, io mem 0xf6c00000
Apr 21 01:38:03 vostro kernel: [ 166.843923] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
Apr 21 01:38:03 vostro kernel: [ 166.843925] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 21 01:38:03 vostro kernel: [ 166.843926] usb usb5: Product: xHCI Host Controller
Apr 21 01:38:03 vostro kernel: [ 166.843927] usb usb5: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
Apr 21 01:38:03 vostro kernel: [ 166.843928] usb usb5: SerialNumber: 0000:11:00.0
Apr 21 01:38:03 vostro kernel: [ 166.844076] hub 5-0:1.0: USB hub found
Apr 21 01:38:03 vostro kernel: [ 166.844088] hub 5-0:1.0: 2 ports detected
Apr 21 01:38:03 vostro kernel: [ 166.844162] xhci_hcd 0000:11:00.0: xHCI Host Controller
Apr 21 01:38:03 vostro kernel: [ 166.844164] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 6
Apr 21 01:38:03 vostro kernel: [ 166.846869] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
Apr 21 01:38:03 vostro kernel: [ 166.846872] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 21 01:38:03 vostro kernel: [ 166.846874] usb usb6: Product: xHCI Host Controller
Apr 21 01:38:03 vostro kernel: [ 166.846876] usb usb6: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
Apr 21 01:38:03 vostro kernel: [ 166.846878] usb usb6: SerialNumber: 0000:11:00.0
Apr 21 01:38:03 vostro kernel: [ 166.847205] hub 6-0:1.0: USB hub found
Apr 21 01:38:03 vostro kernel: [ 166.847224] hub 6-0:1.0: 2 ports detected
removed
re-inserting
removing
Apr 21 01:40:22 vostro kernel: [ 305.286902] xhci_hcd 0000:11:00.0: remove, state 4
Apr 21 01:40:22 vostro kernel: [ 305.286909] usb usb6: USB disconnect, device number 1
Apr 21 01:40:22 vostro kernel: [ 305.287036] xhci_hcd 0000:11:00.0: Host not halted after 16000 microseconds.
Apr 21 01:40:22 vostro kernel: [ 305.287040] xhci_hcd 0000:11:00.0: USB bus 6 deregistered
Apr 21 01:40:22 vostro kernel: [ 305.287044] xhci_hcd 0000:11:00.0: remove, state 4
Apr 21 01:40:22 vostro kernel: [ 305.287047] usb usb5: USB disconnect, device number 1
Apr 21 01:40:22 vostro kernel: [ 305.287206] xhci_hcd 0000:11:00.0: Host not halted after 16000 microseconds.
Apr 21 01:40:22 vostro kernel: [ 305.287308] xhci_hcd 0000:11:00.0: USB bus 5 deregistered
re-inserting
Apr 21 01:42:05 vostro kernel: [ 408.103695] pci 0000:11:00.0: BAR 0: assigned [mem 0xf6c00000-0xf6c01fff 64bit]
Apr 21 01:42:05 vostro kernel: [ 408.103825] xhci_hcd 0000:11:00.0: enabling device (0100 -> 0102)
Apr 21 01:42:05 vostro kernel: [ 408.103875] xhci_hcd 0000:11:00.0: xHCI Host Controller
Apr 21 01:42:05 vostro kernel: [ 408.103880] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 5
Apr 21 01:42:05 vostro kernel: [ 408.104183] xhci_hcd 0000:11:00.0: irq 19, io mem 0xf6c00000
Apr 21 01:42:05 vostro kernel: [ 408.104474] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
Apr 21 01:42:05 vostro kernel: [ 408.104475] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 21 01:42:05 vostro kernel: [ 408.104477] usb usb5: Product: xHCI Host Controller
Apr 21 01:42:05 vostro kernel: [ 408.104478] usb usb5: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
Apr 21 01:42:05 vostro kernel: [ 408.104479] usb usb5: SerialNumber: 0000:11:00.0
Apr 21 01:42:05 vostro kernel: [ 408.104566] hub 5-0:1.0: USB hub found
Apr 21 01:42:05 vostro kernel: [ 408.104577] hub 5-0:1.0: 2 ports detected
Apr 21 01:42:05 vostro kernel: [ 408.104639] xhci_hcd 0000:11:00.0: xHCI Host Controller
Apr 21 01:42:05 vostro kernel: [ 408.104641] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 6
Apr 21 01:42:05 vostro kernel: [ 408.107411] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
Apr 21 01:42:05 vostro kernel: [ 408.107413] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 21 01:42:05 vostro kernel: [ 408.107415] usb usb6: Product: xHCI Host Controller
Apr 21 01:42:05 vostro kernel: [ 408.107417] usb usb6: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
Apr 21 01:42:05 vostro kernel: [ 408.107418] usb usb6: SerialNumber: 0000:11:00.0
Apr 21 01:42:05 vostro kernel: [ 408.107560] hub 6-0:1.0: USB hub found
Apr 21 01:42:05 vostro kernel: [ 408.107578] hub 6-0:1.0: 2 ports detected
removing
re-inserting
removing
Apr 21 01:49:06 vostro kernel: [ 828.978080] xhci_hcd 0000:11:00.0: remove, state 4
Apr 21 01:49:06 vostro kernel: [ 828.978094] usb usb6: USB disconnect, device number 1
Apr 21 01:49:06 vostro kernel: [ 828.978249] xhci_hcd 0000:11:00.0: Host not halted after 16000 microseconds.
Apr 21 01:49:06 vostro kernel: [ 828.978253] xhci_hcd 0000:11:00.0: USB bus 6 deregistered
Apr 21 01:49:06 vostro kernel: [ 828.978257] xhci_hcd 0000:11:00.0: remove, state 4
Apr 21 01:49:06 vostro kernel: [ 828.978260] usb usb5: USB disconnect, device number 1
Apr 21 01:49:06 vostro kernel: [ 828.978432] xhci_hcd 0000:11:00.0: Host not halted after 16000 microseconds.
Apr 21 01:49:06 vostro kernel: [ 828.978520] xhci_hcd 0000:11:00.0: USB bus 5 deregistered
Martin
[-- Attachment #2: dmesg.txt --]
[-- Type: text/plain, Size: 67335 bytes --]
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.4.0-rc3-default (root@vostro) (gcc version 4.5.3 (Gentoo 4.5.3-r2 p1.1, pie-0.4.7) ) #8 SMP Fri Apr 20 12:44:48 MEST 2012
[ 0.000000] Command line: root=/dev/sda5 pciehp.pciehp_debug=1 pcie_aspm=off
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d400 (usable)
[ 0.000000] BIOS-e820: 000000000009d400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
[ 0.000000] BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
[ 0.000000] BIOS-e820: 0000000020200000 - 0000000040000000 (usable)
[ 0.000000] BIOS-e820: 0000000040000000 - 0000000040200000 (reserved)
[ 0.000000] BIOS-e820: 0000000040200000 - 00000000da4e5000 (usable)
[ 0.000000] BIOS-e820: 00000000da4e5000 - 00000000da528000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000da528000 - 00000000da793000 (usable)
[ 0.000000] BIOS-e820: 00000000da793000 - 00000000da967000 (reserved)
[ 0.000000] BIOS-e820: 00000000da967000 - 00000000daa89000 (usable)
[ 0.000000] BIOS-e820: 00000000daa89000 - 00000000dad68000 (reserved)
[ 0.000000] BIOS-e820: 00000000dad68000 - 00000000dafe8000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000dafe8000 - 00000000db000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000db800000 - 00000000dfa00000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed04000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000041fe00000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.6 present.
[ 0.000000] DMI: Dell Inc. Vostro 3550/0JGC48, BIOS A09 09/30/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x41fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask C00000000 write-back
[ 0.000000] 1 base 400000000 mask FE0000000 write-back
[ 0.000000] 2 base 0DB800000 mask FFF800000 uncachable
[ 0.000000] 3 base 0DC000000 mask FFC000000 uncachable
[ 0.000000] 4 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 5 base 41FE00000 mask FFFE00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000db800000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xdaa89 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000daa89000
[ 0.000000] 0000000000 - 00daa00000 page 2M
[ 0.000000] 00daa00000 - 00daa89000 page 4k
[ 0.000000] kernel direct mapping tables up to daa89000 @ 1fffa000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-000000041fe00000
[ 0.000000] 0100000000 - 041fe00000 page 2M
[ 0.000000] kernel direct mapping tables up to 41fe00000 @ daa77000-daa89000
[ 0.000000] ACPI: RSDP 00000000000f0410 00024 (v02 DELL)
[ 0.000000] ACPI: XSDT 00000000dafe8078 00074 (v01 DELL WN09 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 00000000daff1d08 000F4 (v04 DELL WN09 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 00000000dafe8180 09B85 (v02 DELL WN09 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000dafe3f80 00040
[ 0.000000] ACPI: APIC 00000000daff1e00 00072 (v03 DELL WN09 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 00000000daff1e78 0003C (v01 DELL WN09 01072009 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000daff1eb8 004B0 (v01 TrmRef PtidDevc 00001000 INTL 20091112)
[ 0.000000] ACPI: SLIC 00000000daff2368 00176 (v01 DELL WN09 01072009 AMI 00010013)
[ 0.000000] ACPI: HPET 00000000daff24e0 00038 (v01 DELL WN09 01072009 AMI. 00000004)
[ 0.000000] ACPI: SSDT 00000000daff2518 00846 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 00000000daff2d60 00996 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: DMAR 00000000daff36f8 000E8 (v01 INTEL SNB 00000001 INTL 00000001)
[ 0.000000] ACPI: OSFR 00000000daff37e0 00086 (v01 DELL M08 07DB091E ASL 00000061)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000041fe00000
[ 0.000000] Initmem setup node 0 0000000000000000-000000041fe00000
[ 0.000000] NODE_DATA [000000041fdfc000 - 000000041fdfffff]
[ 0.000000] [ffffea0000000000-ffffea000e7fffff] PMD -> [ffff88040f400000-ffff88041d5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0041fe00
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x00020000
[ 0.000000] 0: 0x00020200 -> 0x00040000
[ 0.000000] 0: 0x00040200 -> 0x000da4e5
[ 0.000000] 0: 0x000da528 -> 0x000da793
[ 0.000000] 0: 0x000da967 -> 0x000daa89
[ 0.000000] 0: 0x00100000 -> 0x0041fe00
[ 0.000000] On node 0 totalpages: 4170239
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3920 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 875690 pages, LIFO batch:31
[ 0.000000] Normal zone: 44793 pages used for memmap
[ 0.000000] Normal zone: 3231495 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[ 0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000
[ 0.000000] PM: Registered nosave memory: 00000000da4e5000 - 00000000da528000
[ 0.000000] PM: Registered nosave memory: 00000000da793000 - 00000000da967000
[ 0.000000] PM: Registered nosave memory: 00000000daa89000 - 00000000dad68000
[ 0.000000] PM: Registered nosave memory: 00000000dad68000 - 00000000dafe8000
[ 0.000000] PM: Registered nosave memory: 00000000dafe8000 - 00000000db000000
[ 0.000000] PM: Registered nosave memory: 00000000db000000 - 00000000db800000
[ 0.000000] PM: Registered nosave memory: 00000000db800000 - 00000000dfa00000
[ 0.000000] PM: Registered nosave memory: 00000000dfa00000 - 00000000f8000000
[ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000
[ 0.000000] PM: Registered nosave memory: 00000000fed04000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at dfa00000 (gap: dfa00000:18600000)
[ 0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 25 pages/cpu @ffff88041fa00000 s72448 r8192 d21760 u524288
[ 0.000000] pcpu-alloc: s72448 r8192 d21760 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4111105
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/sda5 pciehp.pciehp_debug=1 pcie_aspm=off
[ 0.000000] PCIe ASPM is disabled
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 16372132k/17299456k available (5719k kernel code, 618500k absent, 308824k reserved, 3607k data, 544k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:4352 nr_irqs:712 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.010000] Detected 2793.451 MHz processor.
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5586.90 BogoMIPS (lpj=27934510)
[ 0.000192] pid_max: default: 32768 minimum: 301
[ 0.001168] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.004175] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.005547] Mount-cache hash table entries: 256
[ 0.005810] CPU: Physical Processor ID: 0
[ 0.005902] CPU: Processor Core ID: 0
[ 0.005995] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.005995] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.006187] mce: CPU supports 7 MCE banks
[ 0.006288] CPU0: Thermal monitoring enabled (TM1)
[ 0.006384] using mwait in idle threads.
[ 0.006535] ACPI: Core revision 20120320
[ 0.024592] DMAR: Host address width 36
[ 0.024685] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.024785] IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ 0.024931] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.025029] IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.025173] DMAR: RMRR base: 0x000000dad53000 end: 0x000000dad61fff
[ 0.025269] DMAR: RMRR base: 0x000000db800000 end: 0x000000df9fffff
[ 0.025434] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.025529] HPET id 0 under DRHD base 0xfed91000
[ 0.025623] HPET id 0 under DRHD base 0xfed91000
[ 0.025716] HPET id 0 under DRHD base 0xfed91000
[ 0.025809] HPET id 0 under DRHD base 0xfed91000
[ 0.025901] HPET id 0 under DRHD base 0xfed91000
[ 0.025995] HPET id 0 under DRHD base 0xfed91000
[ 0.026087] HPET id 0 under DRHD base 0xfed91000
[ 0.026179] HPET id 0 under DRHD base 0xfed91000
[ 0.026432] Enabled IRQ remapping in x2apic mode
[ 0.026526] Enabling x2apic
[ 0.026616] Enabled x2apic
[ 0.026709] Switched APIC routing to cluster x2apic.
[ 0.027251] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.127196] CPU0: Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz stepping 07
[ 0.246469] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
[ 0.246773] PEBS disabled due to CPU errata.
[ 0.246867] ... version: 3
[ 0.246959] ... bit width: 48
[ 0.247051] ... generic registers: 4
[ 0.247143] ... value mask: 0000ffffffffffff
[ 0.247236] ... max period: 000000007fffffff
[ 0.248649] ... fixed-purpose events: 3
[ 0.248741] ... event mask: 000000070000000f
[ 0.248924] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.249095] Booting Node 0, Processors #1
[ 0.262292] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.262552] #2
[ 0.275707] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.275970] #3 Ok.
[ 0.289170] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.289288] Brought up 4 CPUs
[ 0.289379] Total of 4 processors activated (22347.60 BogoMIPS).
[ 0.292410] devtmpfs: initialized
[ 0.292679] PM: Registering ACPI NVS region [mem 0xda4e5000-0xda527fff] (274432 bytes)
[ 0.292835] PM: Registering ACPI NVS region [mem 0xdad68000-0xdafe7fff] (2621440 bytes)
[ 0.293102] xor: automatically using best checksumming function: generic_sse
[ 0.336333] generic_sse: 12446.800 MB/sec
[ 0.336426] xor: using function: generic_sse (12446.800 MB/sec)
[ 0.336650] dummy:
[ 0.336809] NET: Registered protocol family 16
[ 0.337217] ACPI: bus type pci registered
[ 0.337403] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.337552] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.344693] PCI: Using configuration type 1 for base access
[ 0.350665] bio: create slab <bio-0> at 0
[ 0.516067] raid6: int64x1 2922 MB/s
[ 0.685807] raid6: int64x2 3002 MB/s
[ 0.855570] raid6: int64x4 2722 MB/s
[ 1.025328] raid6: int64x8 1729 MB/s
[ 1.195043] raid6: sse2x1 7521 MB/s
[ 1.364785] raid6: sse2x2 9285 MB/s
[ 1.534525] raid6: sse2x4 10550 MB/s
[ 1.534617] raid6: using algorithm sse2x4 (10550 MB/s)
[ 1.534752] ACPI: Added _OSI(Module Device)
[ 1.534844] ACPI: Added _OSI(Processor Device)
[ 1.534937] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 1.535030] ACPI: Added _OSI(Processor Aggregator Device)
[ 1.536340] ACPI: EC: Look up EC in DSDT
[ 1.537655] ACPI: Executed 1 blocks of module-level executable AML code
[ 1.542224] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 1.546937] ACPI: SSDT 00000000dad51698 0064F (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 1.547477] ACPI: Dynamic OEM Table Load:
[ 1.547646] ACPI: SSDT (null) 0064F (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 1.548225] ACPI: SSDT 00000000dad52a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 1.548803] ACPI: Dynamic OEM Table Load:
[ 1.548974] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 1.557469] ACPI: SSDT 00000000dad50d98 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 1.558000] ACPI: Dynamic OEM Table Load:
[ 1.558167] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 1.558954] ACPI: Interpreter enabled
[ 1.559047] ACPI: (supports S0 S1 S3 S4 S5)
[ 1.559356] ACPI: Using IOAPIC for interrupt routing
[ 1.585405] ACPI: No dock devices found.
[ 1.585502] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 1.585976] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 1.586510] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 1.586607] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 1.586704] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 1.586850] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[ 1.586994] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 1.587138] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 1.587283] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
[ 1.587428] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
[ 1.587573] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
[ 1.587718] pci_root PNP0A08:00: host bridge window [mem 0xdfa00000-0xfeafffff]
[ 1.587863] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
[ 1.588052] PCI host bridge to bus 0000:00
[ 1.588146] pci_bus 0000:00: busn_res: [bus 00-3e] for root bus
[ 1.588148] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 1.588243] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 1.588340] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 1.588436] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 1.588534] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 1.588630] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 1.588727] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 1.588824] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 1.588921] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 1.589018] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 1.589115] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff]
[ 1.589212] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[ 1.589316] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[ 1.589349] pci 0000:00:02.0: [8086:0126] type 00 class 0x030000
[ 1.589358] pci 0000:00:02.0: reg 10: [mem 0xf6800000-0xf6bfffff 64bit]
[ 1.589363] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 1.589367] pci 0000:00:02.0: reg 20: [io 0xf000-0xf03f]
[ 1.589418] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 1.589441] pci 0000:00:16.0: reg 10: [mem 0xf7f0a000-0xf7f0a00f 64bit]
[ 1.589516] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 1.589549] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 1.589569] pci 0000:00:1a.0: reg 10: [mem 0xf7f08000-0xf7f083ff]
[ 1.589657] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 1.589683] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 1.589698] pci 0000:00:1b.0: reg 10: [mem 0xf7f00000-0xf7f03fff 64bit]
[ 1.589763] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.589788] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 1.589865] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.589891] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[ 1.589967] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 1.589994] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[ 1.590071] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 1.590101] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[ 1.590232] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 1.590277] pci 0000:00:1c.7: [8086:1c1e] type 01 class 0x060400
[ 1.590408] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[ 1.590448] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 1.590468] pci 0000:00:1d.0: reg 10: [mem 0xf7f07000-0xf7f073ff]
[ 1.590556] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 1.590583] pci 0000:00:1f.0: [8086:1c4b] type 00 class 0x060100
[ 1.590706] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[ 1.590724] pci 0000:00:1f.2: reg 10: [io 0xf0b0-0xf0b7]
[ 1.590732] pci 0000:00:1f.2: reg 14: [io 0xf0a0-0xf0a3]
[ 1.590739] pci 0000:00:1f.2: reg 18: [io 0xf090-0xf097]
[ 1.590747] pci 0000:00:1f.2: reg 1c: [io 0xf080-0xf083]
[ 1.590755] pci 0000:00:1f.2: reg 20: [io 0xf060-0xf07f]
[ 1.590763] pci 0000:00:1f.2: reg 24: [mem 0xf7f06000-0xf7f067ff]
[ 1.590807] pci 0000:00:1f.2: PME# supported from D3hot
[ 1.590825] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 1.590839] pci 0000:00:1f.3: reg 10: [mem 0xf7f05000-0xf7f050ff 64bit]
[ 1.590860] pci 0000:00:1f.3: reg 20: [io 0xf040-0xf05f]
[ 1.590890] pci 0000:00:1c.0: check if busn 03-04 is in busn_res: [bus 00-3e]
[ 1.590937] pci_bus 0000:03: busn_res: [bus 03-04] is inserted under [bus 00-3e]
[ 1.590941] pci 0000:00:1c.0: PCI bridge to [bus 03-04]
[ 1.591045] pci 0000:00:1c.1: check if busn 05-06 is in busn_res: [bus 00-3e]
[ 1.591090] pci_bus 0000:05: busn_res: [bus 05-06] is inserted under [bus 00-3e]
[ 1.591116] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
[ 1.591136] pci 0000:05:00.0: reg 10: [io 0xe000-0xe0ff]
[ 1.591169] pci 0000:05:00.0: reg 18: [mem 0xf1104000-0xf1104fff 64bit pref]
[ 1.591191] pci 0000:05:00.0: reg 20: [mem 0xf1100000-0xf1103fff 64bit pref]
[ 1.591282] pci 0000:05:00.0: supports D1 D2
[ 1.591283] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.610277] pci 0000:00:1c.1: PCI bridge to [bus 05-06]
[ 1.610417] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
[ 1.610425] pci 0000:00:1c.1: bridge window [mem 0xf1100000-0xf11fffff 64bit pref]
[ 1.610430] pci 0000:00:1c.3: check if busn 09-0a is in busn_res: [bus 00-3e]
[ 1.610474] pci_bus 0000:09: busn_res: [bus 09-0a] is inserted under [bus 00-3e]
[ 1.610636] pci 0000:09:00.0: [8086:008a] type 00 class 0x028000
[ 1.610729] pci 0000:09:00.0: reg 10: [mem 0xf7e00000-0xf7e01fff 64bit]
[ 1.611414] pci 0000:09:00.0: PME# supported from D0 D3hot D3cold
[ 1.630361] pci 0000:00:1c.3: PCI bridge to [bus 09-0a]
[ 1.630459] pci 0000:00:1c.3: bridge window [mem 0xf7e00000-0xf7efffff]
[ 1.630469] pci 0000:00:1c.4: check if busn 0b-0c is in busn_res: [bus 00-3e]
[ 1.630537] pci_bus 0000:0b: busn_res: [bus 0b-0c] is inserted under [bus 00-3e]
[ 1.630564] pci 0000:0b:00.0: [104c:8241] type 00 class 0x0c0330
[ 1.630589] pci 0000:0b:00.0: reg 10: [mem 0xf7d00000-0xf7d0ffff 64bit]
[ 1.630609] pci 0000:0b:00.0: reg 18: [mem 0xf7d10000-0xf7d11fff 64bit]
[ 1.630713] pci 0000:0b:00.0: supports D1 D2
[ 1.630714] pci 0000:0b:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.650214] pci 0000:00:1c.4: PCI bridge to [bus 0b-0c]
[ 1.650361] pci 0000:00:1c.4: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 1.650373] pci 0000:00:1c.7: check if busn 11-16 is in busn_res: [bus 00-3e]
[ 1.650440] pci_bus 0000:11: busn_res: [bus 11-16] is inserted under [bus 00-3e]
[ 1.650444] pci 0000:00:1c.7: PCI bridge to [bus 11-16]
[ 1.650542] pci 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
[ 1.650546] pci 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff]
[ 1.650555] pci 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
[ 1.650608] pci 0000:00:1c.0: PCI bridge to [bus 03-04]
[ 1.650715] pci 0000:00:1c.1: PCI bridge to [bus 05-06]
[ 1.650812] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
[ 1.650821] pci 0000:00:1c.1: bridge window [mem 0xf1100000-0xf11fffff 64bit pref]
[ 1.650827] pci 0000:00:1c.3: PCI bridge to [bus 09-0a]
[ 1.650926] pci 0000:00:1c.3: bridge window [mem 0xf7e00000-0xf7efffff]
[ 1.650939] pci 0000:00:1c.4: PCI bridge to [bus 0b-0c]
[ 1.651037] pci 0000:00:1c.4: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 1.651054] pci 0000:00:1c.7: PCI bridge to [bus 11-16]
[ 1.651152] pci 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
[ 1.651157] pci 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff]
[ 1.651166] pci 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
[ 1.651172] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.651342] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 1.651379] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 1.651418] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 1.651455] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[ 1.651507] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP08._PRT]
[ 1.651641] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x19)
[ 1.656375] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 1.656940] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 1.657501] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
[ 1.658062] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 1.658624] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.659308] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.659995] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 1.660559] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 1.661116] acpi root: \_SB_.PCI0 notify handler installed
[ 1.661167] Found 1 acpi root devices
[ 1.661251] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.661401] vgaarb: loaded
[ 1.661490] vgaarb: bridge control possible 0000:00:02.0
[ 1.661718] SCSI subsystem initialized
[ 1.661876] libata version 3.00 loaded.
[ 1.661976] usbcore: registered new interface driver usbfs
[ 1.662092] usbcore: registered new interface driver hub
[ 1.662214] usbcore: registered new device driver usb
[ 1.662365] Linux media interface: v0.10
[ 1.662477] Linux video capture interface: v2.00
[ 1.662928] wmi: Mapper loaded
[ 1.663063] Advanced Linux Sound Architecture Driver Version 1.0.25.
[ 1.663160] PCI: Using ACPI for IRQ routing
[ 1.665199] PCI: pci_cache_line_size set to 64 bytes
[ 1.665307] reserve RAM buffer: 000000000009d400 - 000000000009ffff
[ 1.665309] reserve RAM buffer: 00000000da4e5000 - 00000000dbffffff
[ 1.665312] reserve RAM buffer: 00000000da793000 - 00000000dbffffff
[ 1.665315] reserve RAM buffer: 00000000daa89000 - 00000000dbffffff
[ 1.665318] reserve RAM buffer: 000000041fe00000 - 000000041fffffff
[ 1.665455] Bluetooth: Core ver 2.16
[ 1.665567] NET: Registered protocol family 31
[ 1.665661] Bluetooth: HCI device and connection manager initialized
[ 1.665757] Bluetooth: HCI socket layer initialized
[ 1.665850] Bluetooth: L2CAP socket layer initialized
[ 1.665946] Bluetooth: SCO socket layer initialized
[ 1.666105] cfg80211: Calling CRDA to update world regulatory domain
[ 1.666314] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 1.666762] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 1.668867] Switching to clocksource hpet
[ 1.669038] pnp: PnP ACPI init
[ 1.669137] ACPI: bus type pnp registered
[ 1.669472] pnp 00:00: [bus 00-3e]
[ 1.669474] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 1.669475] pnp 00:00: [io 0x0cf8-0x0cff]
[ 1.669477] pnp 00:00: [io 0x0d00-0xffff window]
[ 1.669479] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 1.669480] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 1.669482] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 1.669483] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 1.669485] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 1.669486] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 1.669488] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 1.669489] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 1.669491] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 1.669492] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 1.669494] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 1.669496] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 1.669497] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 1.669499] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 1.669500] pnp 00:00: [mem 0xdfa00000-0xfeafffff window]
[ 1.669502] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 1.669569] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 1.669580] pnp 00:01: [io 0x0000-0x001f]
[ 1.669582] pnp 00:01: [io 0x0081-0x0091]
[ 1.669583] pnp 00:01: [io 0x0093-0x009f]
[ 1.669584] pnp 00:01: [io 0x00c0-0x00df]
[ 1.669586] pnp 00:01: [dma 4]
[ 1.669624] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 1.669632] pnp 00:02: [mem 0xff000000-0xffffffff]
[ 1.669671] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 1.669744] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 1.669785] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 1.669797] pnp 00:04: [io 0x002e-0x002f]
[ 1.669798] pnp 00:04: [io 0x004e-0x004f]
[ 1.669799] pnp 00:04: [io 0x0061]
[ 1.669801] pnp 00:04: [io 0x0063]
[ 1.669802] pnp 00:04: [io 0x0065]
[ 1.669803] pnp 00:04: [io 0x0067]
[ 1.669804] pnp 00:04: [io 0x0070]
[ 1.669805] pnp 00:04: [io 0x0080]
[ 1.669807] pnp 00:04: [io 0x0092]
[ 1.669808] pnp 00:04: [io 0x00b2-0x00b3]
[ 1.669809] pnp 00:04: [io 0x0680-0x069f]
[ 1.669811] pnp 00:04: [io 0x1000-0x100f]
[ 1.669812] pnp 00:04: [io 0xffff]
[ 1.669813] pnp 00:04: [io 0xffff]
[ 1.669814] pnp 00:04: [io 0x0400-0x0453]
[ 1.669816] pnp 00:04: [io 0x0458-0x047f]
[ 1.669817] pnp 00:04: [io 0x0500-0x057f]
[ 1.669818] pnp 00:04: [io 0x164e-0x164f]
[ 1.669874] system 00:04: [io 0x0680-0x069f] has been reserved
[ 1.669970] system 00:04: [io 0x1000-0x100f] has been reserved
[ 1.670066] system 00:04: [io 0xffff] has been reserved
[ 1.670163] system 00:04: [io 0xffff] has been reserved
[ 1.670258] system 00:04: [io 0x0400-0x0453] has been reserved
[ 1.670354] system 00:04: [io 0x0458-0x047f] has been reserved
[ 1.670450] system 00:04: [io 0x0500-0x057f] has been reserved
[ 1.670546] system 00:04: [io 0x164e-0x164f] has been reserved
[ 1.670642] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.670650] pnp 00:05: [io 0x0070-0x0077]
[ 1.670660] pnp 00:05: [irq 8]
[ 1.670700] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.670726] pnp 00:06: [io 0x0454-0x0457]
[ 1.670779] system 00:06: [io 0x0454-0x0457] has been reserved
[ 1.670874] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 1.670882] pnp 00:07: [io 0x00f0-0x00ff]
[ 1.670889] pnp 00:07: [irq 13]
[ 1.670930] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 1.670946] pnp 00:08: [io 0x0010-0x001f]
[ 1.670948] pnp 00:08: [io 0x0022-0x003f]
[ 1.670949] pnp 00:08: [io 0x0044-0x005f]
[ 1.670950] pnp 00:08: [io 0x0068-0x006f]
[ 1.670951] pnp 00:08: [io 0x0072-0x007f]
[ 1.670953] pnp 00:08: [io 0x0080]
[ 1.670954] pnp 00:08: [io 0x0084-0x0086]
[ 1.670956] pnp 00:08: [io 0x0088]
[ 1.670957] pnp 00:08: [io 0x008c-0x008e]
[ 1.670958] pnp 00:08: [io 0x0090-0x009f]
[ 1.670960] pnp 00:08: [io 0x00a2-0x00bf]
[ 1.670961] pnp 00:08: [io 0x00e0-0x00ef]
[ 1.670962] pnp 00:08: [io 0x04d0-0x04d1]
[ 1.670964] pnp 00:08: [mem 0xfe800000-0xfe802fff]
[ 1.671018] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 1.671116] system 00:08: [mem 0xfe800000-0xfe802fff] has been reserved
[ 1.671214] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.671230] pnp 00:09: [irq 12]
[ 1.671273] pnp 00:09: Plug and Play ACPI device, IDs DLL04b3 SYN0600 SYN0002 PNP0f13 (active)
[ 1.671287] pnp 00:0a: [io 0x0060]
[ 1.671288] pnp 00:0a: [io 0x0064]
[ 1.671289] pnp 00:0a: [io 0x0062]
[ 1.671290] pnp 00:0a: [io 0x0066]
[ 1.671296] pnp 00:0a: [irq 1]
[ 1.671338] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active)
[ 1.671528] pnp 00:0b: [mem 0xfed1c000-0xfed1ffff]
[ 1.671529] pnp 00:0b: [mem 0xfed10000-0xfed17fff]
[ 1.671531] pnp 00:0b: [mem 0xfed18000-0xfed18fff]
[ 1.671532] pnp 00:0b: [mem 0xfed19000-0xfed19fff]
[ 1.671534] pnp 00:0b: [mem 0xf8000000-0xfbffffff]
[ 1.671535] pnp 00:0b: [mem 0xfed20000-0xfed3ffff]
[ 1.671536] pnp 00:0b: [mem 0xfed90000-0xfed93fff]
[ 1.671538] pnp 00:0b: [mem 0xfed45000-0xfed8ffff]
[ 1.671539] pnp 00:0b: [mem 0xff000000-0xffffffff]
[ 1.671541] pnp 00:0b: [mem 0xfee00000-0xfeefffff]
[ 1.671542] pnp 00:0b: [mem 0xdfa00000-0xdfa00fff]
[ 1.671608] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.671705] system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved
[ 1.671802] system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved
[ 1.671899] system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved
[ 1.671995] system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved
[ 1.672092] system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.672189] system 00:0b: [mem 0xfed90000-0xfed93fff] has been reserved
[ 1.672287] system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 1.672383] system 00:0b: [mem 0xff000000-0xffffffff] has been reserved
[ 1.672480] system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 1.672576] system 00:0b: [mem 0xdfa00000-0xdfa00fff] has been reserved
[ 1.672674] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.672732] pnp 00:0c: [irq 20]
[ 1.672789] pnp 00:0c: Plug and Play ACPI device, IDs SMO8800 (active)
[ 1.672899] pnp 00:0d: [mem 0x20000000-0x201fffff]
[ 1.672900] pnp 00:0d: [mem 0x40000000-0x401fffff]
[ 1.672969] system 00:0d: [mem 0x20000000-0x201fffff] has been reserved
[ 1.673065] system 00:0d: [mem 0x40000000-0x401fffff] has been reserved
[ 1.673163] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 1.673206] pnp: PnP ACPI: found 14 devices
[ 1.673298] ACPI: ACPI bus type pnp unregistered
[ 1.681420] pci 0000:00:1c.0: PCI bridge to [bus 03-04]
[ 1.681526] pci 0000:00:1c.1: PCI bridge to [bus 05-06]
[ 1.681622] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
[ 1.681724] pci 0000:00:1c.1: bridge window [mem 0xf1100000-0xf11fffff 64bit pref]
[ 1.681872] pci 0000:00:1c.3: PCI bridge to [bus 09-0a]
[ 1.681969] pci 0000:00:1c.3: bridge window [mem 0xf7e00000-0xf7efffff]
[ 1.682071] pci 0000:00:1c.4: PCI bridge to [bus 0b-0c]
[ 1.682171] pci 0000:00:1c.4: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 1.682277] pci 0000:00:1c.7: PCI bridge to [bus 11-16]
[ 1.682375] pci 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
[ 1.683793] pci 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff]
[ 1.683894] pci 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
[ 1.684084] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.684086] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.684087] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.684089] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 1.684090] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 1.684092] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 1.684094] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[ 1.684095] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
[ 1.684097] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
[ 1.684098] pci_bus 0000:00: resource 13 [mem 0xdfa00000-0xfeafffff]
[ 1.684100] pci_bus 0000:00: resource 14 [mem 0xfed40000-0xfed44fff]
[ 1.684102] pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
[ 1.684103] pci_bus 0000:05: resource 2 [mem 0xf1100000-0xf11fffff 64bit pref]
[ 1.684105] pci_bus 0000:09: resource 1 [mem 0xf7e00000-0xf7efffff]
[ 1.684107] pci_bus 0000:0b: resource 1 [mem 0xf7d00000-0xf7dfffff]
[ 1.684109] pci_bus 0000:11: resource 0 [io 0xc000-0xdfff]
[ 1.684110] pci_bus 0000:11: resource 1 [mem 0xf6c00000-0xf7cfffff]
[ 1.684112] pci_bus 0000:11: resource 2 [mem 0xf0000000-0xf10fffff 64bit pref]
[ 1.684182] NET: Registered protocol family 2
[ 1.684538] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 1.685522] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.686735] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.686956] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.687053] TCP: reno registered
[ 1.687161] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 1.687309] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 1.687511] NET: Registered protocol family 1
[ 1.687615] pci 0000:00:02.0: Boot video device
[ 1.928763] PCI: CLS 64 bytes, default 64
[ 1.928823] DMAR: No ATSR found
[ 1.928937] IOMMU 0 0xfed90000: using Queued invalidation
[ 1.929032] IOMMU 1 0xfed91000: using Queued invalidation
[ 1.929127] IOMMU: Setting RMRR:
[ 1.929228] IOMMU: Setting identity map for device 0000:00:02.0 [0xdb800000 - 0xdf9fffff]
[ 1.929735] IOMMU: Setting identity map for device 0000:00:1d.0 [0xdad53000 - 0xdad61fff]
[ 1.929898] IOMMU: Setting identity map for device 0000:00:1a.0 [0xdad53000 - 0xdad61fff]
[ 1.930052] IOMMU: Prepare 0-16MiB unity mapping for LPC
[ 1.930153] IOMMU: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff]
[ 1.930587] PCI-DMA: Intel(R) Virtualization Technology for Directed I/O
[ 1.933399] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x1b
[ 1.933502] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x1b
[ 1.933604] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x1b
[ 1.933708] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x1b
[ 1.933854] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.934893] sha1_ssse3: Using AVX optimized SHA-1 implementation
[ 1.936127] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.938025] DLM installed
[ 1.938252] msgmni has been set to 32105
[ 1.939509] NET: Registered protocol family 38
[ 1.939604] async_tx: api initialized (async)
[ 1.939739] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.939886] io scheduler noop registered
[ 1.939978] io scheduler deadline registered
[ 1.940088] io scheduler cfq registered (default)
[ 1.940603] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.940775] pciehp: pcie_port_service_register = 0
[ 1.940777] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.940875] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 1.941117] acpiphp: Slot [1] registered
[ 1.941442] intel_idle: MWAIT substates: 0x21120
[ 1.941444] intel_idle: v0.4 model 0x2A
[ 1.941445] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.941549] ACPI: AC Adapter [AC] (on-line)
[ 1.941753] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 1.943359] ACPI: Lid Switch [LID0]
[ 1.943511] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 1.943659] ACPI: Power Button [PWRB]
[ 1.943807] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 1.943954] ACPI: Sleep Button [SBTN]
[ 1.944100] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.944245] ACPI: Power Button [PWRF]
[ 1.944601] ACPI: Requesting acpi_cpufreq
[ 1.954901] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.954997] ACPI: Thermal Zone [THM] (67 C)
[ 1.955201] GHES: HEST is not enabled!
[ 1.976158] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.976914] Non-volatile memory driver v1.3
[ 1.977331] i8k: unable to get SMM BIOS version
[ 1.980463] Dell laptop SMM driver v1.14 21/02/2005 Massimo Dal Zotto (dz@debian.org)
[ 1.980716] Linux agpgart interface v0.103
[ 1.980863] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
[ 1.981038] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 1.982228] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[ 1.982473] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 1.982640] ipmi message handler version 39.2
[ 1.982740] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
[ 1.982887] Hangcheck: Using getrawmonotonic().
[ 1.983017] [drm] Initialized drm 1.1.0 20060810
[ 1.983348] i915 0000:00:02.0: setting latency timer to 64
[ 1.989041] ACPI: Battery Slot [BAT0] (battery present)
[ 2.019669] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
[ 2.019815] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 2.020256] i915 0000:00:02.0: irq 42 for MSI/MSI-X
[ 2.020264] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 2.020360] [drm] Driver supports precise vblank timestamp query.
[ 2.020482] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.100345] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 2.654555] fbcon: inteldrmfb (fb0) is primary device
[ 2.927126] Refined TSC clocksource calibration: 2793.652 MHz.
[ 2.927135] Switching to clocksource tsc
[ 3.156000] Console: switching to colour frame buffer device 170x48
[ 3.158775] fb0: inteldrmfb frame buffer device
[ 3.158776] drm: registered panic notifier
[ 3.160011] acpi device:34: registered as cooling_device4
[ 3.160245] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4
[ 3.160290] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 3.160352] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 3.161208] loop: module loaded
[ 3.161346] ahci 0000:00:1f.2: version 3.0
[ 3.161392] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 3.161417] ahci: SSS flag set, parallel bus scan disabled
[ 3.176778] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x31 impl SATA mode
[ 3.176881] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
[ 3.176923] ahci 0000:00:1f.2: setting latency timer to 64
[ 3.217460] scsi0 : ahci
[ 3.217571] scsi1 : ahci
[ 3.217663] scsi2 : ahci
[ 3.217754] scsi3 : ahci
[ 3.217843] scsi4 : ahci
[ 3.217938] scsi5 : ahci
[ 3.219209] ata1: SATA max UDMA/133 abar m2048@0xf7f06000 port 0xf7f06100 irq 43
[ 3.220185] ata2: DUMMY
[ 3.221146] ata3: DUMMY
[ 3.222102] ata4: DUMMY
[ 3.223039] ata5: SATA max UDMA/133 abar m2048@0xf7f06000 port 0xf7f06300 irq 43
[ 3.223998] ata6: SATA max UDMA/133 abar m2048@0xf7f06000 port 0xf7f06380 irq 43
[ 3.225083] tun: Universal TUN/TAP device driver, 1.6
[ 3.226029] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 3.227037] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 3.228085] r8169 0000:05:00.0: irq 44 for MSI/MSI-X
[ 3.228243] r8169 0000:05:00.0: eth0: RTL8168e/8111e at 0xffffc900065d2000, 18:03:73:a0:6f:6a, XID 0c200000 IRQ 44
[ 3.229222] r8169 0000:05:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 3.230217] VMware vmxnet3 virtual NIC driver - version 1.1.29.0-k-NAPI
[ 3.231232] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.232207] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 3.232210] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 3.233158] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 3.234141] ehci_hcd 0000:00:1a.0: debug port 2
[ 3.238977] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 3.238989] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7f08000
[ 3.256623] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 3.257668] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.258602] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.259537] usb usb1: Product: EHCI Host Controller
[ 3.260465] usb usb1: Manufacturer: Linux 3.4.0-rc3-default ehci_hcd
[ 3.261407] usb usb1: SerialNumber: 0000:00:1a.0
[ 3.262473] hub 1-0:1.0: USB hub found
[ 3.263426] hub 1-0:1.0: 2 ports detected
[ 3.264426] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3.264429] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 3.265367] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 3.266329] ehci_hcd 0000:00:1d.0: debug port 2
[ 3.271157] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 3.271170] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7f07000
[ 3.286577] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 3.287603] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.288517] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.289434] usb usb2: Product: EHCI Host Controller
[ 3.290339] usb usb2: Manufacturer: Linux 3.4.0-rc3-default ehci_hcd
[ 3.291248] usb usb2: SerialNumber: 0000:00:1d.0
[ 3.292240] hub 2-0:1.0: USB hub found
[ 3.293129] hub 2-0:1.0: 2 ports detected
[ 3.294064] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.295018] xhci_hcd 0000:0b:00.0: xHCI Host Controller
[ 3.295923] xhci_hcd 0000:0b:00.0: new USB bus registered, assigned bus number 3
[ 3.297036] xhci_hcd 0000:0b:00.0: irq 16, io mem 0xf7d00000
[ 3.298039] xhci_hcd 0000:0b:00.0: irq 45 for MSI/MSI-X
[ 3.298043] xhci_hcd 0000:0b:00.0: irq 46 for MSI/MSI-X
[ 3.298048] xhci_hcd 0000:0b:00.0: irq 47 for MSI/MSI-X
[ 3.298053] xhci_hcd 0000:0b:00.0: irq 48 for MSI/MSI-X
[ 3.298057] xhci_hcd 0000:0b:00.0: irq 49 for MSI/MSI-X
[ 3.298152] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.299101] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.300047] usb usb3: Product: xHCI Host Controller
[ 3.300981] usb usb3: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
[ 3.301930] usb usb3: SerialNumber: 0000:0b:00.0
[ 3.302955] xHCI xhci_add_endpoint called for root hub
[ 3.302957] xHCI xhci_check_bandwidth called for root hub
[ 3.302992] hub 3-0:1.0: USB hub found
[ 3.303948] hub 3-0:1.0: 2 ports detected
[ 3.304945] xhci_hcd 0000:0b:00.0: xHCI Host Controller
[ 3.305893] xhci_hcd 0000:0b:00.0: new USB bus registered, assigned bus number 4
[ 3.306878] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 3.307827] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.308763] usb usb4: Product: xHCI Host Controller
[ 3.309681] usb usb4: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
[ 3.310592] usb usb4: SerialNumber: 0000:0b:00.0
[ 3.311549] xHCI xhci_add_endpoint called for root hub
[ 3.311551] xHCI xhci_check_bandwidth called for root hub
[ 3.311588] hub 4-0:1.0: USB hub found
[ 3.312492] hub 4-0:1.0: 2 ports detected
[ 3.313477] usbcore: registered new interface driver uas
[ 3.314437] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2] at 0x60,0x64 irq 1,12
[ 3.317641] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.318570] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.319594] mousedev: PS/2 mouse device common for all mice
[ 3.320754] rtc_cmos 00:05: RTC can wake from S4
[ 3.321793] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 3.322726] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 3.323654] i2c /dev entries driver
[ 3.324927] gspca_main: v2.14.0 registered
[ 3.325868] usbcore: registered new interface driver uvcvideo
[ 3.326800] USB Video Class driver (1.1.1)
[ 3.327802] coretemp coretemp.0: TjMax is 100 degrees C
[ 3.327812] coretemp coretemp.0: TjMax is 100 degrees C
[ 3.327823] coretemp coretemp.0: TjMax is 100 degrees C
[ 3.327850] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 3.328842] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 3.329838] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 3.330786] iTCO_vendor_support: vendor-support=0
[ 3.331745] md: linear personality registered for level -1
[ 3.332675] md: raid0 personality registered for level 0
[ 3.333609] md: raid1 personality registered for level 1
[ 3.334536] md: raid10 personality registered for level 10
[ 3.334937] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 3.336443] md: raid6 personality registered for level 6
[ 3.337408] md: raid5 personality registered for level 5
[ 3.338355] md: raid4 personality registered for level 4
[ 3.339431] device-mapper: uevent: version 1.0.3
[ 3.340412] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 3.341412] device-mapper: dm-log-userspace: version 1.1.0 loaded
[ 3.342379] usbcore: registered new interface driver btusb
[ 3.343404] cpuidle: using governor ladder
[ 3.344423] cpuidle: using governor menu
[ 3.345389] sdhci: Secure Digital Host Controller Interface driver
[ 3.346320] sdhci: Copyright(c) Pierre Ossman
[ 3.347572] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 3.348855] usbcore: registered new interface driver usbhid
[ 3.349804] usbhid: USB HID core driver
[ 3.350799] mei 0000:00:16.0: setting latency timer to 64
[ 3.350845] mei 0000:00:16.0: irq 50 for MSI/MSI-X
[ 3.377078] input: Dell WMI hotkeys as /devices/virtual/input/input6
[ 3.389248] intel_oaktrail: Platform not recognized (You could try the module's force-parameter)
[ 3.389442] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X
[ 3.566250] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.572400] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 3.573613] ata1.00: ATA-8: WDC WD7500BPKT-75PK4T0, 01.01A01, max UDMA/133
[ 3.574683] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 3.576188] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 3.580713] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 3.582053] ata1.00: configured for UDMA/133
[ 3.596439] scsi 0:0:0:0: Direct-Access ATA WDC WD7500BPKT-7 01.0 PQ: 0 ANSI: 5
[ 3.598008] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[ 3.598195] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.600101] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 3.601241] sd 0:0:0:0: [sda] Write Protect is off
[ 3.602257] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.602316] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.700951] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 3.702832] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.726436] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 3.727533] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.729104] hub 1-1:1.0: USB hub found
[ 3.730296] hub 1-1:1.0: 6 ports detected
[ 3.845845] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 3.945685] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.950144] ata5.00: ATAPI: PLDS DVD+/-RW DS-8A8SH, KD11, max UDMA/100
[ 3.956955] ata5.00: configured for UDMA/100
[ 3.970066] scsi 4:0:0:0: CD-ROM PLDS DVD+-RW DS-8A8SH KD11 PQ: 0 ANSI: 5
[ 3.980076] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.981196] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.982583] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 3.982814] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 3.996120] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 3.997219] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.998829] hub 2-1:1.0: USB hub found
[ 4.000018] hub 2-1:1.0: 8 ports detected
[ 4.007013] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
[ 4.031227] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 4.032483] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 4.033706] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 4.035387] ALSA device list:
[ 4.036489] #0: HDA Intel PCH at 0xf7f00000 irq 51
[ 4.037656] TCP: cubic registered
[ 4.038737] NET: Registered protocol family 17
[ 4.039836] Bluetooth: RFCOMM TTY layer initialized
[ 4.040913] Bluetooth: RFCOMM socket layer initialized
[ 4.041981] Bluetooth: RFCOMM ver 1.11
[ 4.043026] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 4.044065] Bluetooth: BNEP filters: protocol multicast
[ 4.045090] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 4.046433] sctp: Hash tables configured (established 65536 bind 65536)
[ 4.047627] Registering the dns_resolver key type
[ 4.048824] PM: Checking hibernation image partition /dev/sda6
[ 4.048829] PM: Hibernation image partition 8:6 present
[ 4.048831] PM: Looking for hibernation image.
[ 4.057454] PM: Image not found (code -22)
[ 4.057461] PM: Hibernation image not present or could not be loaded.
[ 4.057481] registered taskstats version 1
[ 4.059640] rtc_cmos 00:05: setting system clock to 2012-04-21 01:35:20 UTC (1334972120)
[ 4.061535] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
[ 4.115448] usb 3-1: new low-speed USB device number 2 using xhci_hcd
[ 4.169810] usb 3-1: New USB device found, idVendor=046d, idProduct=c050
[ 4.170757] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.171615] usb 3-1: Product: USB-PS/2 Optical Mouse
[ 4.172467] usb 3-1: Manufacturer: Logitech
[ 4.173501] usb 3-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 4.191143] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1c.4/0000:0b:00.0/usb3/3-1/3-1:1.0/input/input11
[ 4.192566] generic-usb 0003:046D:C050.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:0b:00.0-1/input0
[ 4.265388] usb 1-1.5: new high-speed USB device number 3 using ehci_hcd
[ 4.311359] input: DualPoint Stick as /devices/platform/i8042/serio1/input/input12
[ 4.325106] ata6: SATA link down (SStatus 0 SControl 300)
[ 4.326462] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input13
[ 4.330527] md: Waiting for all devices to be available before autodetect
[ 4.331509] md: If you don't use raid, use raid=noautodetect
[ 4.332785] md: Autodetecting RAID arrays.
[ 4.333764] md: Scanned 0 and added 0 devices.
[ 4.334720] md: autorun ...
[ 4.335661] md: ... autorun DONE.
[ 4.382652] usb 1-1.5: New USB device found, idVendor=05ca, idProduct=1820
[ 4.383683] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.384590] usb 1-1.5: Product: Laptop_Integrated_Webcam_FHD
[ 4.385513] usb 1-1.5: Manufacturer: CN01MWM9724871A4KB28A00
[ 4.387343] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_FHD (05ca:1820)
[ 4.389913] input: Laptop_Integrated_Webcam_FHD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input14
[ 4.400079] kjournald starting. Commit interval 5 seconds
[ 4.400218] EXT3-fs (sda5): mounted filesystem with writeback data mode
[ 4.400225] VFS: Mounted root (ext3 filesystem) readonly on device 8:5.
[ 4.441100] devtmpfs: mounted
[ 4.442213] Freeing unused kernel memory: 544k freed
[ 4.465090] usb 2-1.2: new low-speed USB device number 3 using ehci_hcd
[ 4.582353] usb 2-1.2: New USB device found, idVendor=04f2, idProduct=0116
[ 4.583409] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.584346] usb 2-1.2: Product: USB Keyboard
[ 4.585298] usb 2-1.2: Manufacturer: CHICONY
[ 4.591596] input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input15
[ 4.592704] generic-usb 0003:04F2:0116.0002: input,hidraw1: USB HID v1.10 Keyboard [CHICONY USB Keyboard] on usb-0000:00:1d.0-1.2/input0
[ 4.684605] usb 2-1.3: new full-speed USB device number 4 using ehci_hcd
[ 4.795970] usb 2-1.3: New USB device found, idVendor=138a, idProduct=0011
[ 4.797064] usb 2-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[ 4.798051] usb 2-1.3: SerialNumber: 56ed5821afe2
[ 4.874504] usb 2-1.6: new high-speed USB device number 5 using ehci_hcd
[ 4.996697] usb 2-1.6: New USB device found, idVendor=0bda, idProduct=0138
[ 4.997780] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.998761] usb 2-1.6: Product: USB2.0-CRW
[ 4.999742] usb 2-1.6: Manufacturer: Generic
[ 5.000705] usb 2-1.6: SerialNumber: 20090516388200000
[ 7.613287] udevd[1756]: starting version 171
[ 10.141557] ACPI Warning: 0x000000000000f040-0x000000000000f05f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120320/utaddress-251)
[ 10.141563] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.237001] Initializing USB Mass Storage driver...
[ 10.237088] scsi6 : usb-storage 2-1.6:1.0
[ 10.237175] usbcore: registered new interface driver usb-storage
[ 10.237177] USB Mass Storage support registered.
[ 11.237822] scsi 6:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 11.237973] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 11.246520] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 11.534658] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d
[ 11.534660] Copyright(c) 2003-2012 Intel Corporation
[ 11.534848] iwlwifi 0000:09:00.0: pci_resource_len = 0x00002000
[ 11.534849] iwlwifi 0000:09:00.0: pci_resource_base = ffffc90006684000
[ 11.534851] iwlwifi 0000:09:00.0: HW Revision ID = 0x34
[ 11.535138] iwlwifi 0000:09:00.0: irq 52 for MSI/MSI-X
[ 11.610869] iwlwifi 0000:09:00.0: loaded firmware version 17.168.5.2 build 35905
[ 11.610969] iwlwifi 0000:09:00.0: CONFIG_IWLWIFI_DEBUG enabled
[ 11.610971] iwlwifi 0000:09:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[ 11.610973] iwlwifi 0000:09:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[ 11.610974] iwlwifi 0000:09:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled
[ 11.610976] iwlwifi 0000:09:00.0: CONFIG_IWLWIFI_P2P disabled
[ 11.610978] iwlwifi 0000:09:00.0: Detected Intel(R) Centrino(R) Wireless-N 1030 BGN, REV=0xB0
[ 11.611069] iwlwifi 0000:09:00.0: L1 Enabled; Disabling L0S
[ 11.628358] iwlwifi 0000:09:00.0: device EEPROM VER=0x71a, CALIB=0x6
[ 11.628360] iwlwifi 0000:09:00.0: Device SKU: 0x150
[ 11.628362] iwlwifi 0000:09:00.0: Valid Tx ant: 0x1, Valid Rx ant: 0x3
[ 11.628373] iwlwifi 0000:09:00.0: Tunable channels: 13 802.11bg, 0 802.11a channels
[ 11.628451] Registered led device: phy0-led
[ 11.628506] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 12.508753] EXT3-fs (sda5): using internal journal
[ 12.762672] Adding 4998972k swap on /dev/sda6. Priority:-1 extents:1 across:4998972k
[ 17.277036] r8169 0000:05:00.0: eth0: unable to load firmware patch rtl_nic/rtl8168e-2.fw (-2)
[ 17.319493] r8169 0000:05:00.0: eth0: link down
[ 17.319524] r8169 0000:05:00.0: eth0: link down
[ 19.086651] r8169 0000:05:00.0: eth0: link up
[ 23.524722] microcode: CPU0 updated to revision 0x25, date = 2011-10-11
[ 23.525077] microcode: CPU1 updated to revision 0x25, date = 2011-10-11
[ 23.525408] microcode: CPU2 updated to revision 0x25, date = 2011-10-11
[ 23.525756] microcode: CPU3 updated to revision 0x25, date = 2011-10-11
[ 24.226288] [drm] Changing LVDS panel from (+hsync, -vsync) to (-hsync, -vsync)
[ 25.772486] r8169 0000:05:00.0: eth0: link down
[ 28.170484] r8169 0000:05:00.0: eth0: link up
[ 44.173171] usb 2-1.2: USB disconnect, device number 3
[ 74.310962] usb 2-1.2: new low-speed USB device number 6 using ehci_hcd
[ 74.428887] usb 2-1.2: New USB device found, idVendor=04f2, idProduct=0116
[ 74.428897] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 74.428904] usb 2-1.2: Product: USB Keyboard
[ 74.428909] usb 2-1.2: Manufacturer: CHICONY
[ 74.433572] input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input16
[ 74.433647] generic-usb 0003:04F2:0116.0003: input,hidraw1: USB HID v1.10 Keyboard [CHICONY USB Keyboard] on usb-0000:00:1d.0-1.2/input0
[ 91.985241] [drm] Changing LVDS panel from (-hsync, -vsync) to (+hsync, -vsync)
[ 95.325921] ata1.00: configured for UDMA/133
[ 95.325924] ata1: EH complete
[ 166.823193] pci 0000:11:00.0: [1033:0194] type 00 class 0x0c0330
[ 166.823244] pci 0000:11:00.0: reg 10: [mem 0x00000000-0x00001fff 64bit]
[ 166.823493] pci 0000:11:00.0: PME# supported from D0 D3hot
[ 166.843165] pci 0000:11:00.0: BAR 0: assigned [mem 0xf6c00000-0xf6c01fff 64bit]
[ 166.843272] xhci_hcd 0000:11:00.0: enabling device (0100 -> 0102)
[ 166.843329] xhci_hcd 0000:11:00.0: xHCI Host Controller
[ 166.843335] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 5
[ 166.843637] xhci_hcd 0000:11:00.0: irq 19, io mem 0xf6c00000
[ 166.843761] xhci_hcd 0000:11:00.0: irq 53 for MSI/MSI-X
[ 166.843765] xhci_hcd 0000:11:00.0: irq 54 for MSI/MSI-X
[ 166.843768] xhci_hcd 0000:11:00.0: irq 55 for MSI/MSI-X
[ 166.843772] xhci_hcd 0000:11:00.0: irq 56 for MSI/MSI-X
[ 166.843776] xhci_hcd 0000:11:00.0: irq 57 for MSI/MSI-X
[ 166.843923] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 166.843925] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 166.843926] usb usb5: Product: xHCI Host Controller
[ 166.843927] usb usb5: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
[ 166.843928] usb usb5: SerialNumber: 0000:11:00.0
[ 166.844052] xHCI xhci_add_endpoint called for root hub
[ 166.844054] xHCI xhci_check_bandwidth called for root hub
[ 166.844076] hub 5-0:1.0: USB hub found
[ 166.844088] hub 5-0:1.0: 2 ports detected
[ 166.844162] xhci_hcd 0000:11:00.0: xHCI Host Controller
[ 166.844164] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 6
[ 166.846869] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[ 166.846872] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 166.846874] usb usb6: Product: xHCI Host Controller
[ 166.846876] usb usb6: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
[ 166.846878] usb usb6: SerialNumber: 0000:11:00.0
[ 166.847174] xHCI xhci_add_endpoint called for root hub
[ 166.847176] xHCI xhci_check_bandwidth called for root hub
[ 166.847205] hub 6-0:1.0: USB hub found
[ 166.847224] hub 6-0:1.0: 2 ports detected
[ 305.286902] xhci_hcd 0000:11:00.0: remove, state 4
[ 305.286909] usb usb6: USB disconnect, device number 1
[ 305.286952] xHCI xhci_drop_endpoint called for root hub
[ 305.286961] xHCI xhci_check_bandwidth called for root hub
[ 305.287036] xhci_hcd 0000:11:00.0: Host not halted after 16000 microseconds.
[ 305.287040] xhci_hcd 0000:11:00.0: USB bus 6 deregistered
[ 305.287044] xhci_hcd 0000:11:00.0: remove, state 4
[ 305.287047] usb usb5: USB disconnect, device number 1
[ 305.287072] xHCI xhci_drop_endpoint called for root hub
[ 305.287073] xHCI xhci_check_bandwidth called for root hub
[ 305.287206] xhci_hcd 0000:11:00.0: Host not halted after 16000 microseconds.
[ 305.287308] xhci_hcd 0000:11:00.0: USB bus 5 deregistered
[ 408.083718] pci 0000:11:00.0: [1033:0194] type 00 class 0x0c0330
[ 408.083770] pci 0000:11:00.0: reg 10: [mem 0x00000000-0x00001fff 64bit]
[ 408.084021] pci 0000:11:00.0: PME# supported from D0 D3hot
[ 408.103695] pci 0000:11:00.0: BAR 0: assigned [mem 0xf6c00000-0xf6c01fff 64bit]
[ 408.103825] xhci_hcd 0000:11:00.0: enabling device (0100 -> 0102)
[ 408.103875] xhci_hcd 0000:11:00.0: xHCI Host Controller
[ 408.103880] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 5
[ 408.104183] xhci_hcd 0000:11:00.0: irq 19, io mem 0xf6c00000
[ 408.104308] xhci_hcd 0000:11:00.0: irq 53 for MSI/MSI-X
[ 408.104312] xhci_hcd 0000:11:00.0: irq 54 for MSI/MSI-X
[ 408.104315] xhci_hcd 0000:11:00.0: irq 55 for MSI/MSI-X
[ 408.104319] xhci_hcd 0000:11:00.0: irq 56 for MSI/MSI-X
[ 408.104323] xhci_hcd 0000:11:00.0: irq 57 for MSI/MSI-X
[ 408.104474] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 408.104475] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 408.104477] usb usb5: Product: xHCI Host Controller
[ 408.104478] usb usb5: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
[ 408.104479] usb usb5: SerialNumber: 0000:11:00.0
[ 408.104545] xHCI xhci_add_endpoint called for root hub
[ 408.104547] xHCI xhci_check_bandwidth called for root hub
[ 408.104566] hub 5-0:1.0: USB hub found
[ 408.104577] hub 5-0:1.0: 2 ports detected
[ 408.104639] xhci_hcd 0000:11:00.0: xHCI Host Controller
[ 408.104641] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 6
[ 408.107411] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[ 408.107413] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 408.107415] usb usb6: Product: xHCI Host Controller
[ 408.107417] usb usb6: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
[ 408.107418] usb usb6: SerialNumber: 0000:11:00.0
[ 408.107528] xHCI xhci_add_endpoint called for root hub
[ 408.107530] xHCI xhci_check_bandwidth called for root hub
[ 408.107560] hub 6-0:1.0: USB hub found
[ 408.107578] hub 6-0:1.0: 2 ports detected
[ 828.978080] xhci_hcd 0000:11:00.0: remove, state 4
[ 828.978094] usb usb6: USB disconnect, device number 1
[ 828.978137] xHCI xhci_drop_endpoint called for root hub
[ 828.978146] xHCI xhci_check_bandwidth called for root hub
[ 828.978249] xhci_hcd 0000:11:00.0: Host not halted after 16000 microseconds.
[ 828.978253] xhci_hcd 0000:11:00.0: USB bus 6 deregistered
[ 828.978257] xhci_hcd 0000:11:00.0: remove, state 4
[ 828.978260] usb usb5: USB disconnect, device number 1
[ 828.978289] xHCI xhci_drop_endpoint called for root hub
[ 828.978291] xHCI xhci_check_bandwidth called for root hub
[ 828.978432] xhci_hcd 0000:11:00.0: Host not halted after 16000 microseconds.
[ 828.978520] xhci_hcd 0000:11:00.0: USB bus 5 deregistered
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: 3.2.11: PCI Express card cannot be re-detected withing cca 60sec timeframe
2012-04-20 23:50 ` Martin Mokrejs
@ 2012-04-21 0:04 ` Yinghai Lu
0 siblings, 0 replies; 55+ messages in thread
From: Yinghai Lu @ 2012-04-21 0:04 UTC (permalink / raw)
To: Martin Mokrejs; +Cc: Sarah Sharp, linux-pci, Linux Kernel Mailing List
On Fri, Apr 20, 2012 at 4:50 PM, Martin Mokrejs
<mmokrejs@fold.natur.cuni.cz> wrote:
>
>
> Yinghai Lu wrote:
>> On Fri, Apr 20, 2012 at 10:28 AM, Martin Mokrejs
>> <mmokrejs@fold.natur.cuni.cz> wrote:
>>>
>
> inserting
>
> Apr 21 01:38:03 vostro kernel: [ 166.843165] pci 0000:11:00.0: BAR 0: assigned [mem 0xf6c00000-0xf6c01fff 64bit]
> Apr 21 01:38:03 vostro kernel: [ 166.843272] xhci_hcd 0000:11:00.0: enabling device (0100 -> 0102)
> Apr 21 01:38:03 vostro kernel: [ 166.843329] xhci_hcd 0000:11:00.0: xHCI Host Controller
> Apr 21 01:38:03 vostro kernel: [ 166.843335] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 5
> Apr 21 01:38:03 vostro kernel: [ 166.843637] xhci_hcd 0000:11:00.0: irq 19, io mem 0xf6c00000
> Apr 21 01:38:03 vostro kernel: [ 166.843923] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
> Apr 21 01:38:03 vostro kernel: [ 166.843925] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> Apr 21 01:38:03 vostro kernel: [ 166.843926] usb usb5: Product: xHCI Host Controller
> Apr 21 01:38:03 vostro kernel: [ 166.843927] usb usb5: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
> Apr 21 01:38:03 vostro kernel: [ 166.843928] usb usb5: SerialNumber: 0000:11:00.0
> Apr 21 01:38:03 vostro kernel: [ 166.844076] hub 5-0:1.0: USB hub found
> Apr 21 01:38:03 vostro kernel: [ 166.844088] hub 5-0:1.0: 2 ports detected
> Apr 21 01:38:03 vostro kernel: [ 166.844162] xhci_hcd 0000:11:00.0: xHCI Host Controller
> Apr 21 01:38:03 vostro kernel: [ 166.844164] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 6
> Apr 21 01:38:03 vostro kernel: [ 166.846869] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
> Apr 21 01:38:03 vostro kernel: [ 166.846872] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> Apr 21 01:38:03 vostro kernel: [ 166.846874] usb usb6: Product: xHCI Host Controller
> Apr 21 01:38:03 vostro kernel: [ 166.846876] usb usb6: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
> Apr 21 01:38:03 vostro kernel: [ 166.846878] usb usb6: SerialNumber: 0000:11:00.0
> Apr 21 01:38:03 vostro kernel: [ 166.847205] hub 6-0:1.0: USB hub found
> Apr 21 01:38:03 vostro kernel: [ 166.847224] hub 6-0:1.0: 2 ports detected
>
> removed
>
> re-inserting
>
so pcie_aspm=off not help.
Yinghai
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: 3.2.11: PCI Express card cannot be re-detected withing cca 60sec timeframe
2012-04-20 23:17 ` Sarah Sharp
@ 2012-04-21 0:09 ` Yinghai Lu
2012-04-21 4:46 ` Yinghai Lu
2012-04-21 13:25 ` Sarah Sharp
0 siblings, 2 replies; 55+ messages in thread
From: Yinghai Lu @ 2012-04-21 0:09 UTC (permalink / raw)
To: Sarah Sharp; +Cc: Martin Mokrejs, linux-pci, Linux Kernel Mailing List
On Fri, Apr 20, 2012 at 4:17 PM, Sarah Sharp
<sarah.a.sharp@linux.intel.com> wrote:
> On Fri, Apr 20, 2012 at 11:47:14AM -0700, Yinghai Lu wrote:
>> On Fri, Apr 20, 2012 at 10:28 AM, Martin Mokrejs
>> <mmokrejs@fold.natur.cuni.cz> wrote:
>> > [30720.175637] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 108
>> > [30720.175639] pciehp 0000:00:1c.7:pcie04: LinkState change
>> > [30720.175643] pciehp 0000:00:1c.7:pcie04: lnk_status = 5011
>> > [30720.175644] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
>> > [30720.175648] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
>> > [30720.175687] pciehp 0000:00:1c.7:pcie04: Surprise Removal
>> > [30720.175718] pciehp 0000:00:1c.7:pcie04: Disabling domain:bus:device=0000:11:00
>> > [30720.175721] pciehp 0000:00:1c.7:pcie04: pciehp_unconfigure_device: domain:bus:dev = 0000:11:00
>> >
>>
>> So the USB host control driver xhci put that 11:00.0 in strange power state.
>
> What do you mean "strange power state"? The only PCI power states the
> xHCI driver will use is D0 or D3hot. D3hot is entered automatically by
> the USB core runtime PM system when all USB devices are disconnected or
> suspended. So what strange power state are we talking about?
that's helpful. Can that feature to be disabled?
Yinghai
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: 3.2.11: PCI Express card cannot be re-detected withing cca 60sec timeframe
2012-04-21 0:09 ` Yinghai Lu
@ 2012-04-21 4:46 ` Yinghai Lu
2012-04-21 9:01 ` Martin Mokrejs
2012-04-21 13:25 ` Sarah Sharp
1 sibling, 1 reply; 55+ messages in thread
From: Yinghai Lu @ 2012-04-21 4:46 UTC (permalink / raw)
To: Martin Mokrejs; +Cc: linux-pci, Linux Kernel Mailing List, Sarah Sharp
On Fri, Apr 20, 2012 at 5:09 PM, Yinghai Lu <yinghai@kernel.org> wrote:
>> What do you mean "strange power state"? The only PCI power states the
>> xHCI driver will use is D0 or D3hot. D3hot is entered automatically by
>> the USB core runtime PM system when all USB devices are disconnected or
>> suspended. So what strange power state are we talking about?
>
> that's helpful. Can that feature to be disabled?
please check and set
/sys/bus/pci/devices/0000:11:00.0/power/control
/sys/bus/pci/devices/0000:11:00.0/usb?/power/control
from auto to on
Yinghai
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: 3.2.11: PCI Express card cannot be re-detected withing cca 60sec timeframe
2012-04-21 4:46 ` Yinghai Lu
@ 2012-04-21 9:01 ` Martin Mokrejs
2012-04-21 9:12 ` Martin Mokrejs
0 siblings, 1 reply; 55+ messages in thread
From: Martin Mokrejs @ 2012-04-21 9:01 UTC (permalink / raw)
To: Yinghai Lu; +Cc: linux-pci, Linux Kernel Mailing List, Sarah Sharp
Yinghai Lu wrote:
> On Fri, Apr 20, 2012 at 5:09 PM, Yinghai Lu <yinghai@kernel.org> wrote:
>>> What do you mean "strange power state"? The only PCI power states the
>>> xHCI driver will use is D0 or D3hot. D3hot is entered automatically by
>>> the USB core runtime PM system when all USB devices are disconnected or
>>> suspended. So what strange power state are we talking about?
>>
>> that's helpful. Can that feature to be disabled?
>
> please check and set
> /sys/bus/pci/devices/0000:11:00.0/power/control
> /sys/bus/pci/devices/0000:11:00.0/usb?/power/control
> from auto to on
I inserted the card, it was detected:
[33335.295737] pci 0000:11:00.0: [1033:0194] type 00 class 0x0c0330
[33335.295789] pci 0000:11:00.0: reg 10: [mem 0x00000000-0x00001fff 64bit]
[33335.296043] pci 0000:11:00.0: PME# supported from D0 D3hot
[33335.315688] pci 0000:11:00.0: BAR 0: assigned [mem 0xf6c00000-0xf6c01fff 64bit]
[33335.315796] xhci_hcd 0000:11:00.0: enabling device (0100 -> 0102)
[33335.315893] xhci_hcd 0000:11:00.0: xHCI Host Controller
[33335.315897] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 5
[33335.316178] xhci_hcd 0000:11:00.0: irq 19, io mem 0xf6c00000
[33335.316281] xhci_hcd 0000:11:00.0: irq 53 for MSI/MSI-X
[33335.316285] xhci_hcd 0000:11:00.0: irq 54 for MSI/MSI-X
[33335.316288] xhci_hcd 0000:11:00.0: irq 55 for MSI/MSI-X
[33335.316292] xhci_hcd 0000:11:00.0: irq 56 for MSI/MSI-X
[33335.316296] xhci_hcd 0000:11:00.0: irq 57 for MSI/MSI-X
[33335.316447] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[33335.316448] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[33335.316450] usb usb5: Product: xHCI Host Controller
[33335.316451] usb usb5: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
[33335.316452] usb usb5: SerialNumber: 0000:11:00.0
[33335.316574] xHCI xhci_add_endpoint called for root hub
[33335.316575] xHCI xhci_check_bandwidth called for root hub
[33335.316597] hub 5-0:1.0: USB hub found
[33335.316609] hub 5-0:1.0: 2 ports detected
[33335.316680] xhci_hcd 0000:11:00.0: xHCI Host Controller
[33335.316683] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 6
[33335.319424] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[33335.319426] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[33335.319428] usb usb6: Product: xHCI Host Controller
[33335.319429] usb usb6: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
[33335.319430] usb usb6: SerialNumber: 0000:11:00.0
[33335.319560] xHCI xhci_add_endpoint called for root hub
[33335.319562] xHCI xhci_check_bandwidth called for root hub
[33335.319584] hub 6-0:1.0: USB hub found
[33335.319602] hub 6-0:1.0: 2 ports detected
# cat /sys/bus/pci/devices/0000:11:00.0/power/control
on
# cat /sys/bus/pci/devices/0000:11:00.0/usb?/power/control
auto
auto
# echo on > /sys/bus/pci/devices/0000:11:00.0/usb5/power/control
# echo on > /sys/bus/pci/devices/0000:11:00.0/usb6/power/control
#
I removed the card and it was NOT detected.
Note: I did the test with the running instance of kernel booted WITH pcie_aspm=off.
Will reboot without tha option and re-try.
Martin
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: 3.2.11: PCI Express card cannot be re-detected withing cca 60sec timeframe
2012-04-21 9:01 ` Martin Mokrejs
@ 2012-04-21 9:12 ` Martin Mokrejs
0 siblings, 0 replies; 55+ messages in thread
From: Martin Mokrejs @ 2012-04-21 9:12 UTC (permalink / raw)
Cc: Yinghai Lu, linux-pci, Linux Kernel Mailing List, Sarah Sharp
Martin Mokrejs wrote:
>
>
> Yinghai Lu wrote:
>> On Fri, Apr 20, 2012 at 5:09 PM, Yinghai Lu <yinghai@kernel.org> wrote:
>>>> What do you mean "strange power state"? The only PCI power states the
>>>> xHCI driver will use is D0 or D3hot. D3hot is entered automatically by
>>>> the USB core runtime PM system when all USB devices are disconnected or
>>>> suspended. So what strange power state are we talking about?
>>>
>>> that's helpful. Can that feature to be disabled?
>>
>> please check and set
>> /sys/bus/pci/devices/0000:11:00.0/power/control
>> /sys/bus/pci/devices/0000:11:00.0/usb?/power/control
>> from auto to on
>
> I inserted the card, it was detected:
>
> [33335.295737] pci 0000:11:00.0: [1033:0194] type 00 class 0x0c0330
> [33335.295789] pci 0000:11:00.0: reg 10: [mem 0x00000000-0x00001fff 64bit]
> [33335.296043] pci 0000:11:00.0: PME# supported from D0 D3hot
> [33335.315688] pci 0000:11:00.0: BAR 0: assigned [mem 0xf6c00000-0xf6c01fff 64bit]
> [33335.315796] xhci_hcd 0000:11:00.0: enabling device (0100 -> 0102)
> [33335.315893] xhci_hcd 0000:11:00.0: xHCI Host Controller
> [33335.315897] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 5
> [33335.316178] xhci_hcd 0000:11:00.0: irq 19, io mem 0xf6c00000
> [33335.316281] xhci_hcd 0000:11:00.0: irq 53 for MSI/MSI-X
> [33335.316285] xhci_hcd 0000:11:00.0: irq 54 for MSI/MSI-X
> [33335.316288] xhci_hcd 0000:11:00.0: irq 55 for MSI/MSI-X
> [33335.316292] xhci_hcd 0000:11:00.0: irq 56 for MSI/MSI-X
> [33335.316296] xhci_hcd 0000:11:00.0: irq 57 for MSI/MSI-X
> [33335.316447] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
> [33335.316448] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [33335.316450] usb usb5: Product: xHCI Host Controller
> [33335.316451] usb usb5: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
> [33335.316452] usb usb5: SerialNumber: 0000:11:00.0
> [33335.316574] xHCI xhci_add_endpoint called for root hub
> [33335.316575] xHCI xhci_check_bandwidth called for root hub
> [33335.316597] hub 5-0:1.0: USB hub found
> [33335.316609] hub 5-0:1.0: 2 ports detected
> [33335.316680] xhci_hcd 0000:11:00.0: xHCI Host Controller
> [33335.316683] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 6
> [33335.319424] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
> [33335.319426] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [33335.319428] usb usb6: Product: xHCI Host Controller
> [33335.319429] usb usb6: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
> [33335.319430] usb usb6: SerialNumber: 0000:11:00.0
> [33335.319560] xHCI xhci_add_endpoint called for root hub
> [33335.319562] xHCI xhci_check_bandwidth called for root hub
> [33335.319584] hub 6-0:1.0: USB hub found
> [33335.319602] hub 6-0:1.0: 2 ports detected
>
> # cat /sys/bus/pci/devices/0000:11:00.0/power/control
> on
> # cat /sys/bus/pci/devices/0000:11:00.0/usb?/power/control
> auto
> auto
> # echo on > /sys/bus/pci/devices/0000:11:00.0/usb5/power/control
> # echo on > /sys/bus/pci/devices/0000:11:00.0/usb6/power/control
> #
>
> I removed the card and it was NOT detected.
>
> Note: I did the test with the running instance of kernel booted WITH pcie_aspm=off.
> Will reboot without tha option and re-try.
Same values in sysfs files, same result.
Martin
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: 3.2.11: PCI Express card cannot be re-detected withing cca 60sec timeframe
2012-04-21 0:09 ` Yinghai Lu
2012-04-21 4:46 ` Yinghai Lu
@ 2012-04-21 13:25 ` Sarah Sharp
2012-04-21 18:46 ` Yinghai Lu
1 sibling, 1 reply; 55+ messages in thread
From: Sarah Sharp @ 2012-04-21 13:25 UTC (permalink / raw)
To: Yinghai Lu; +Cc: Martin Mokrejs, linux-pci, Linux Kernel Mailing List
On Fri, Apr 20, 2012 at 05:09:48PM -0700, Yinghai Lu wrote:
> On Fri, Apr 20, 2012 at 4:17 PM, Sarah Sharp
> <sarah.a.sharp@linux.intel.com> wrote:
> > On Fri, Apr 20, 2012 at 11:47:14AM -0700, Yinghai Lu wrote:
> >> On Fri, Apr 20, 2012 at 10:28 AM, Martin Mokrejs
> >> <mmokrejs@fold.natur.cuni.cz> wrote:
> >> > [30720.175637] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 108
> >> > [30720.175639] pciehp 0000:00:1c.7:pcie04: LinkState change
> >> > [30720.175643] pciehp 0000:00:1c.7:pcie04: lnk_status = 5011
> >> > [30720.175644] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
> >> > [30720.175648] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
> >> > [30720.175687] pciehp 0000:00:1c.7:pcie04: Surprise Removal
> >> > [30720.175718] pciehp 0000:00:1c.7:pcie04: Disabling domain:bus:device=0000:11:00
> >> > [30720.175721] pciehp 0000:00:1c.7:pcie04: pciehp_unconfigure_device: domain:bus:dev = 0000:11:00
> >> >
> >>
> >> So the USB host control driver xhci put that 11:00.0 in strange power state.
> >
> > What do you mean "strange power state"? The only PCI power states the
> > xHCI driver will use is D0 or D3hot. D3hot is entered automatically by
> > the USB core runtime PM system when all USB devices are disconnected or
> > suspended. So what strange power state are we talking about?
>
> that's helpful. Can that feature to be disabled?
Yes. There are several ways to disable automatic entry into D3hot.
The easiest way is to turn off CONFIG_USB_SUSPEND, which will disable
USB autosuspend (and subsequent runtime PM entry into D3hot) for all USB
hosts and devices.
If you want a dynamic test, you can go into the USB host sysfs files in
/sys/bus/usb/devices/usbN/power/ (where N is the bus number) and echo
"on" to the control file. Echo "auto" to turn runtime PM back on. The
xHCI driver will register two USB buses, so it's better to turn all the
usbN hosts on for this test.
Alternately, you can also use powertop, go to the Tunables tab, and
change line like this:
>> Good Autosuspend for USB device EHCI Host Controller [usb7]
>From "Good" to "Bad" for the xHCI host.
Sarah Sharp
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: 3.2.11: PCI Express card cannot be re-detected withing cca 60sec timeframe
2012-04-21 13:25 ` Sarah Sharp
@ 2012-04-21 18:46 ` Yinghai Lu
2012-04-24 20:47 ` Martin Mokrejs
2012-04-24 20:48 ` Martin Mokrejs
0 siblings, 2 replies; 55+ messages in thread
From: Yinghai Lu @ 2012-04-21 18:46 UTC (permalink / raw)
To: Martin Mokrejs; +Cc: Sarah Sharp, linux-pci, Linux Kernel Mailing List
On Sat, Apr 21, 2012 at 6:25 AM, Sarah Sharp
<sarah.a.sharp@linux.intel.com> wrote:
> On Fri, Apr 20, 2012 at 05:09:48PM -0700, Yinghai Lu wrote:
>> On Fri, Apr 20, 2012 at 4:17 PM, Sarah Sharp
>> <sarah.a.sharp@linux.intel.com> wrote:
>> > On Fri, Apr 20, 2012 at 11:47:14AM -0700, Yinghai Lu wrote:
>> >> On Fri, Apr 20, 2012 at 10:28 AM, Martin Mokrejs
>> >> <mmokrejs@fold.natur.cuni.cz> wrote:
>> >> > [30720.175637] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 108
>> >> > [30720.175639] pciehp 0000:00:1c.7:pcie04: LinkState change
>> >> > [30720.175643] pciehp 0000:00:1c.7:pcie04: lnk_status = 5011
>> >> > [30720.175644] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
>> >> > [30720.175648] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
>> >> > [30720.175687] pciehp 0000:00:1c.7:pcie04: Surprise Removal
>> >> > [30720.175718] pciehp 0000:00:1c.7:pcie04: Disabling domain:bus:device=0000:11:00
>> >> > [30720.175721] pciehp 0000:00:1c.7:pcie04: pciehp_unconfigure_device: domain:bus:dev = 0000:11:00
>> >> >
>> >>
>> >> So the USB host control driver xhci put that 11:00.0 in strange power state.
>> >
>> > What do you mean "strange power state"? The only PCI power states the
>> > xHCI driver will use is D0 or D3hot. D3hot is entered automatically by
>> > the USB core runtime PM system when all USB devices are disconnected or
>> > suspended. So what strange power state are we talking about?
>>
>> that's helpful. Can that feature to be disabled?
>
> Yes. There are several ways to disable automatic entry into D3hot.
> The easiest way is to turn off CONFIG_USB_SUSPEND, which will disable
> USB autosuspend (and subsequent runtime PM entry into D3hot) for all USB
> hosts and devices.
Please try to boot with
usbcore.autosuspend=0
Yinghai
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: 3.2.11: PCI Express card cannot be re-detected withing cca 60sec timeframe
2012-04-21 18:46 ` Yinghai Lu
@ 2012-04-24 20:47 ` Martin Mokrejs
2012-04-24 20:48 ` Martin Mokrejs
1 sibling, 0 replies; 55+ messages in thread
From: Martin Mokrejs @ 2012-04-24 20:47 UTC (permalink / raw)
To: Yinghai Lu; +Cc: Sarah Sharp, linux-pci, Linux Kernel Mailing List
Hi Yinghai,
Yinghai Lu wrote:
> On Sat, Apr 21, 2012 at 6:25 AM, Sarah Sharp
> <sarah.a.sharp@linux.intel.com> wrote:
>> On Fri, Apr 20, 2012 at 05:09:48PM -0700, Yinghai Lu wrote:
>>> On Fri, Apr 20, 2012 at 4:17 PM, Sarah Sharp
>>> <sarah.a.sharp@linux.intel.com> wrote:
>>>> On Fri, Apr 20, 2012 at 11:47:14AM -0700, Yinghai Lu wrote:
>>>>> On Fri, Apr 20, 2012 at 10:28 AM, Martin Mokrejs
>>>>> <mmokrejs@fold.natur.cuni.cz> wrote:
>>>>>> [30720.175637] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 108
>>>>>> [30720.175639] pciehp 0000:00:1c.7:pcie04: LinkState change
>>>>>> [30720.175643] pciehp 0000:00:1c.7:pcie04: lnk_status = 5011
>>>>>> [30720.175644] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
>>>>>> [30720.175648] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
>>>>>> [30720.175687] pciehp 0000:00:1c.7:pcie04: Surprise Removal
>>>>>> [30720.175718] pciehp 0000:00:1c.7:pcie04: Disabling domain:bus:device=0000:11:00
>>>>>> [30720.175721] pciehp 0000:00:1c.7:pcie04: pciehp_unconfigure_device: domain:bus:dev = 0000:11:00
>>>>>>
>>>>>
>>>>> So the USB host control driver xhci put that 11:00.0 in strange power state.
>>>>
>>>> What do you mean "strange power state"? The only PCI power states the
>>>> xHCI driver will use is D0 or D3hot. D3hot is entered automatically by
>>>> the USB core runtime PM system when all USB devices are disconnected or
>>>> suspended. So what strange power state are we talking about?
>>>
>>> that's helpful. Can that feature to be disabled?
>>
>> Yes. There are several ways to disable automatic entry into D3hot.
>> The easiest way is to turn off CONFIG_USB_SUSPEND, which will disable
>> USB autosuspend (and subsequent runtime PM entry into D3hot) for all USB
>> hosts and devices.
>
> Please try to boot with
> usbcore.autosuspend=0
Sorry for the delay, I was on a travel ...
With the express card itself (no USB devices attached to it) I do not see
a difference. Is this what you wanted me to test?
inserting
Apr 24 22:41:53 vostro kernel: [ 523.968598] pciehp 0000:00:1c.7:pcie04: lnk_status = 7011
Apr 24 22:41:53 vostro kernel: [ 523.968602] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
Apr 24 22:41:53 vostro kernel: [ 524.091233] pci 0000:11:00.0: BAR 0: assigned [mem 0xf6c00000-0xf6c01fff 64bit]
Apr 24 22:41:53 vostro kernel: [ 524.091275] pcieport 0000:00:1c.7: PCI bridge to [bus 11-16]
Apr 24 22:41:53 vostro kernel: [ 524.091278] pcieport 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
Apr 24 22:41:53 vostro kernel: [ 524.091283] pcieport 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff]
Apr 24 22:41:53 vostro kernel: [ 524.091287] pcieport 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
Apr 24 22:41:53 vostro kernel: [ 524.091423] xhci_hcd 0000:11:00.0: enabling device (0100 -> 0102)
Apr 24 22:41:53 vostro kernel: [ 524.091478] xhci_hcd 0000:11:00.0: xHCI Host Controller
Apr 24 22:41:53 vostro kernel: [ 524.091482] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 5
Apr 24 22:41:53 vostro kernel: [ 524.091783] xhci_hcd 0000:11:00.0: irq 19, io mem 0xf6c00000
Apr 24 22:41:53 vostro kernel: [ 524.092049] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
Apr 24 22:41:53 vostro kernel: [ 524.092051] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 24 22:41:53 vostro kernel: [ 524.092052] usb usb5: Product: xHCI Host Controller
Apr 24 22:41:53 vostro kernel: [ 524.092053] usb usb5: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
Apr 24 22:41:53 vostro kernel: [ 524.092054] usb usb5: SerialNumber: 0000:11:00.0
Apr 24 22:41:53 vostro kernel: [ 524.092201] hub 5-0:1.0: USB hub found
Apr 24 22:41:53 vostro kernel: [ 524.092212] hub 5-0:1.0: 2 ports detected
Apr 24 22:41:53 vostro kernel: [ 524.092281] xhci_hcd 0000:11:00.0: xHCI Host Controller
Apr 24 22:41:53 vostro kernel: [ 524.092284] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 6
Apr 24 22:41:53 vostro kernel: [ 524.095021] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
Apr 24 22:41:53 vostro kernel: [ 524.095024] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 24 22:41:53 vostro kernel: [ 524.095026] usb usb6: Product: xHCI Host Controller
Apr 24 22:41:53 vostro kernel: [ 524.095028] usb usb6: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
Apr 24 22:41:53 vostro kernel: [ 524.095030] usb usb6: SerialNumber: 0000:11:00.0
Apr 24 22:41:53 vostro kernel: [ 524.095157] hub 6-0:1.0: USB hub found
Apr 24 22:41:53 vostro kernel: [ 524.095176] hub 6-0:1.0: 2 ports detected
removing
re-inserting
Apr 24 22:43:17 vostro kernel: [ 608.433647] pciehp 0000:00:1c.7:pcie04: lnk_status = 5011
Apr 24 22:43:17 vostro kernel: [ 608.433651] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
Apr 24 22:43:17 vostro kernel: [ 608.445663] xhci_hcd 0000:11:00.0: remove, state 4
Apr 24 22:43:17 vostro kernel: [ 608.445669] usb usb6: USB disconnect, device number 1
Apr 24 22:43:17 vostro kernel: [ 608.445824] xhci_hcd 0000:11:00.0: Host not halted after 16000 microseconds.
Apr 24 22:43:17 vostro kernel: [ 608.445828] xhci_hcd 0000:11:00.0: USB bus 6 deregistered
Apr 24 22:43:17 vostro kernel: [ 608.445833] xhci_hcd 0000:11:00.0: remove, state 4
Apr 24 22:43:17 vostro kernel: [ 608.445836] usb usb5: USB disconnect, device number 1
Apr 24 22:43:17 vostro kernel: [ 608.446056] xhci_hcd 0000:11:00.0: Host not halted after 16000 microseconds.
Apr 24 22:43:17 vostro kernel: [ 608.446149] xhci_hcd 0000:11:00.0: USB bus 5 deregistered
Apr 24 22:43:17 vostro kernel: [ 608.449971] pciehp 0000:00:1c.7:pcie04: lnk_status = 7011
Apr 24 22:43:17 vostro kernel: [ 608.449976] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
Apr 24 22:43:17 vostro kernel: [ 608.575392] pci 0000:11:00.0: BAR 0: assigned [mem 0xf6c00000-0xf6c01fff 64bit]
Apr 24 22:43:17 vostro kernel: [ 608.575434] pcieport 0000:00:1c.7: PCI bridge to [bus 11-16]
Apr 24 22:43:17 vostro kernel: [ 608.575438] pcieport 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
Apr 24 22:43:17 vostro kernel: [ 608.575443] pcieport 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff]
Apr 24 22:43:17 vostro kernel: [ 608.575447] pcieport 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
Apr 24 22:43:17 vostro kernel: [ 608.575575] xhci_hcd 0000:11:00.0: enabling device (0100 -> 0102)
Apr 24 22:43:17 vostro kernel: [ 608.575649] xhci_hcd 0000:11:00.0: xHCI Host Controller
Apr 24 22:43:17 vostro kernel: [ 608.575655] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 5
Apr 24 22:43:17 vostro kernel: [ 608.575956] xhci_hcd 0000:11:00.0: irq 19, io mem 0xf6c00000
Apr 24 22:43:17 vostro kernel: [ 608.576238] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
Apr 24 22:43:17 vostro kernel: [ 608.576240] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 24 22:43:17 vostro kernel: [ 608.576241] usb usb5: Product: xHCI Host Controller
Apr 24 22:43:17 vostro kernel: [ 608.576242] usb usb5: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
Apr 24 22:43:17 vostro kernel: [ 608.576243] usb usb5: SerialNumber: 0000:11:00.0
Apr 24 22:43:17 vostro kernel: [ 608.576399] hub 5-0:1.0: USB hub found
Apr 24 22:43:17 vostro kernel: [ 608.576411] hub 5-0:1.0: 2 ports detected
Apr 24 22:43:17 vostro kernel: [ 608.576472] xhci_hcd 0000:11:00.0: xHCI Host Controller
Apr 24 22:43:17 vostro kernel: [ 608.576475] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 6
Apr 24 22:43:17 vostro kernel: [ 608.579188] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
Apr 24 22:43:17 vostro kernel: [ 608.579191] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 24 22:43:17 vostro kernel: [ 608.579193] usb usb6: Product: xHCI Host Controller
Apr 24 22:43:17 vostro kernel: [ 608.579195] usb usb6: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
Apr 24 22:43:17 vostro kernel: [ 608.579196] usb usb6: SerialNumber: 0000:11:00.0
Apr 24 22:43:17 vostro kernel: [ 608.579324] hub 6-0:1.0: USB hub found
Apr 24 22:43:17 vostro kernel: [ 608.579342] hub 6-0:1.0: 2 ports detected
removing
>
> Yinghai
>
>
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: 3.2.11: PCI Express card cannot be re-detected withing cca 60sec timeframe
2012-04-21 18:46 ` Yinghai Lu
2012-04-24 20:47 ` Martin Mokrejs
@ 2012-04-24 20:48 ` Martin Mokrejs
2012-04-26 16:08 ` Yinghai Lu
1 sibling, 1 reply; 55+ messages in thread
From: Martin Mokrejs @ 2012-04-24 20:48 UTC (permalink / raw)
To: Yinghai Lu; +Cc: Sarah Sharp, linux-pci, Linux Kernel Mailing List
[-- Attachment #1: Type: text/plain, Size: 8387 bytes --]
(sorry for the re-send, now with the attached dmesg)
Hi Yinghai,
Yinghai Lu wrote:
> On Sat, Apr 21, 2012 at 6:25 AM, Sarah Sharp
> <sarah.a.sharp@linux.intel.com> wrote:
>> On Fri, Apr 20, 2012 at 05:09:48PM -0700, Yinghai Lu wrote:
>>> On Fri, Apr 20, 2012 at 4:17 PM, Sarah Sharp
>>> <sarah.a.sharp@linux.intel.com> wrote:
>>>> On Fri, Apr 20, 2012 at 11:47:14AM -0700, Yinghai Lu wrote:
>>>>> On Fri, Apr 20, 2012 at 10:28 AM, Martin Mokrejs
>>>>> <mmokrejs@fold.natur.cuni.cz> wrote:
>>>>>> [30720.175637] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 108
>>>>>> [30720.175639] pciehp 0000:00:1c.7:pcie04: LinkState change
>>>>>> [30720.175643] pciehp 0000:00:1c.7:pcie04: lnk_status = 5011
>>>>>> [30720.175644] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
>>>>>> [30720.175648] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
>>>>>> [30720.175687] pciehp 0000:00:1c.7:pcie04: Surprise Removal
>>>>>> [30720.175718] pciehp 0000:00:1c.7:pcie04: Disabling domain:bus:device=0000:11:00
>>>>>> [30720.175721] pciehp 0000:00:1c.7:pcie04: pciehp_unconfigure_device: domain:bus:dev = 0000:11:00
>>>>>>
>>>>>
>>>>> So the USB host control driver xhci put that 11:00.0 in strange power state.
>>>>
>>>> What do you mean "strange power state"? The only PCI power states the
>>>> xHCI driver will use is D0 or D3hot. D3hot is entered automatically by
>>>> the USB core runtime PM system when all USB devices are disconnected or
>>>> suspended. So what strange power state are we talking about?
>>>
>>> that's helpful. Can that feature to be disabled?
>>
>> Yes. There are several ways to disable automatic entry into D3hot.
>> The easiest way is to turn off CONFIG_USB_SUSPEND, which will disable
>> USB autosuspend (and subsequent runtime PM entry into D3hot) for all USB
>> hosts and devices.
>
> Please try to boot with
> usbcore.autosuspend=0
Sorry for the delay, I was on a travel ...
With the express card itself (no USB devices attached to it) I do not see
a difference. Is this what you wanted me to test?
inserting
Apr 24 22:41:53 vostro kernel: [ 523.968598] pciehp 0000:00:1c.7:pcie04: lnk_status = 7011
Apr 24 22:41:53 vostro kernel: [ 523.968602] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
Apr 24 22:41:53 vostro kernel: [ 524.091233] pci 0000:11:00.0: BAR 0: assigned [mem 0xf6c00000-0xf6c01fff 64bit]
Apr 24 22:41:53 vostro kernel: [ 524.091275] pcieport 0000:00:1c.7: PCI bridge to [bus 11-16]
Apr 24 22:41:53 vostro kernel: [ 524.091278] pcieport 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
Apr 24 22:41:53 vostro kernel: [ 524.091283] pcieport 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff]
Apr 24 22:41:53 vostro kernel: [ 524.091287] pcieport 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
Apr 24 22:41:53 vostro kernel: [ 524.091423] xhci_hcd 0000:11:00.0: enabling device (0100 -> 0102)
Apr 24 22:41:53 vostro kernel: [ 524.091478] xhci_hcd 0000:11:00.0: xHCI Host Controller
Apr 24 22:41:53 vostro kernel: [ 524.091482] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 5
Apr 24 22:41:53 vostro kernel: [ 524.091783] xhci_hcd 0000:11:00.0: irq 19, io mem 0xf6c00000
Apr 24 22:41:53 vostro kernel: [ 524.092049] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
Apr 24 22:41:53 vostro kernel: [ 524.092051] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 24 22:41:53 vostro kernel: [ 524.092052] usb usb5: Product: xHCI Host Controller
Apr 24 22:41:53 vostro kernel: [ 524.092053] usb usb5: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
Apr 24 22:41:53 vostro kernel: [ 524.092054] usb usb5: SerialNumber: 0000:11:00.0
Apr 24 22:41:53 vostro kernel: [ 524.092201] hub 5-0:1.0: USB hub found
Apr 24 22:41:53 vostro kernel: [ 524.092212] hub 5-0:1.0: 2 ports detected
Apr 24 22:41:53 vostro kernel: [ 524.092281] xhci_hcd 0000:11:00.0: xHCI Host Controller
Apr 24 22:41:53 vostro kernel: [ 524.092284] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 6
Apr 24 22:41:53 vostro kernel: [ 524.095021] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
Apr 24 22:41:53 vostro kernel: [ 524.095024] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 24 22:41:53 vostro kernel: [ 524.095026] usb usb6: Product: xHCI Host Controller
Apr 24 22:41:53 vostro kernel: [ 524.095028] usb usb6: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
Apr 24 22:41:53 vostro kernel: [ 524.095030] usb usb6: SerialNumber: 0000:11:00.0
Apr 24 22:41:53 vostro kernel: [ 524.095157] hub 6-0:1.0: USB hub found
Apr 24 22:41:53 vostro kernel: [ 524.095176] hub 6-0:1.0: 2 ports detected
removing
re-inserting
Apr 24 22:43:17 vostro kernel: [ 608.433647] pciehp 0000:00:1c.7:pcie04: lnk_status = 5011
Apr 24 22:43:17 vostro kernel: [ 608.433651] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
Apr 24 22:43:17 vostro kernel: [ 608.445663] xhci_hcd 0000:11:00.0: remove, state 4
Apr 24 22:43:17 vostro kernel: [ 608.445669] usb usb6: USB disconnect, device number 1
Apr 24 22:43:17 vostro kernel: [ 608.445824] xhci_hcd 0000:11:00.0: Host not halted after 16000 microseconds.
Apr 24 22:43:17 vostro kernel: [ 608.445828] xhci_hcd 0000:11:00.0: USB bus 6 deregistered
Apr 24 22:43:17 vostro kernel: [ 608.445833] xhci_hcd 0000:11:00.0: remove, state 4
Apr 24 22:43:17 vostro kernel: [ 608.445836] usb usb5: USB disconnect, device number 1
Apr 24 22:43:17 vostro kernel: [ 608.446056] xhci_hcd 0000:11:00.0: Host not halted after 16000 microseconds.
Apr 24 22:43:17 vostro kernel: [ 608.446149] xhci_hcd 0000:11:00.0: USB bus 5 deregistered
Apr 24 22:43:17 vostro kernel: [ 608.449971] pciehp 0000:00:1c.7:pcie04: lnk_status = 7011
Apr 24 22:43:17 vostro kernel: [ 608.449976] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
Apr 24 22:43:17 vostro kernel: [ 608.575392] pci 0000:11:00.0: BAR 0: assigned [mem 0xf6c00000-0xf6c01fff 64bit]
Apr 24 22:43:17 vostro kernel: [ 608.575434] pcieport 0000:00:1c.7: PCI bridge to [bus 11-16]
Apr 24 22:43:17 vostro kernel: [ 608.575438] pcieport 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
Apr 24 22:43:17 vostro kernel: [ 608.575443] pcieport 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff]
Apr 24 22:43:17 vostro kernel: [ 608.575447] pcieport 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
Apr 24 22:43:17 vostro kernel: [ 608.575575] xhci_hcd 0000:11:00.0: enabling device (0100 -> 0102)
Apr 24 22:43:17 vostro kernel: [ 608.575649] xhci_hcd 0000:11:00.0: xHCI Host Controller
Apr 24 22:43:17 vostro kernel: [ 608.575655] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 5
Apr 24 22:43:17 vostro kernel: [ 608.575956] xhci_hcd 0000:11:00.0: irq 19, io mem 0xf6c00000
Apr 24 22:43:17 vostro kernel: [ 608.576238] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
Apr 24 22:43:17 vostro kernel: [ 608.576240] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 24 22:43:17 vostro kernel: [ 608.576241] usb usb5: Product: xHCI Host Controller
Apr 24 22:43:17 vostro kernel: [ 608.576242] usb usb5: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
Apr 24 22:43:17 vostro kernel: [ 608.576243] usb usb5: SerialNumber: 0000:11:00.0
Apr 24 22:43:17 vostro kernel: [ 608.576399] hub 5-0:1.0: USB hub found
Apr 24 22:43:17 vostro kernel: [ 608.576411] hub 5-0:1.0: 2 ports detected
Apr 24 22:43:17 vostro kernel: [ 608.576472] xhci_hcd 0000:11:00.0: xHCI Host Controller
Apr 24 22:43:17 vostro kernel: [ 608.576475] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 6
Apr 24 22:43:17 vostro kernel: [ 608.579188] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
Apr 24 22:43:17 vostro kernel: [ 608.579191] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 24 22:43:17 vostro kernel: [ 608.579193] usb usb6: Product: xHCI Host Controller
Apr 24 22:43:17 vostro kernel: [ 608.579195] usb usb6: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
Apr 24 22:43:17 vostro kernel: [ 608.579196] usb usb6: SerialNumber: 0000:11:00.0
Apr 24 22:43:17 vostro kernel: [ 608.579324] hub 6-0:1.0: USB hub found
Apr 24 22:43:17 vostro kernel: [ 608.579342] hub 6-0:1.0: 2 ports detected
removing
Attached is the dmesg output (card id removed at the very moment).
>
> Yinghai
>
>
[-- Attachment #2: dmesg.txt --]
[-- Type: text/plain, Size: 70939 bytes --]
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.4.0-rc3-default (root@vostro) (gcc version 4.5.3 (Gentoo 4.5.3-r2 p1.1, pie-0.4.7) ) #8 SMP Fri Apr 20 12:44:48 MEST 2012
[ 0.000000] Command line: root=/dev/sda5 pciehp.pciehp_debug=1 usbcore.autosuspend=0
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d400 (usable)
[ 0.000000] BIOS-e820: 000000000009d400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
[ 0.000000] BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
[ 0.000000] BIOS-e820: 0000000020200000 - 0000000040000000 (usable)
[ 0.000000] BIOS-e820: 0000000040000000 - 0000000040200000 (reserved)
[ 0.000000] BIOS-e820: 0000000040200000 - 00000000da4e5000 (usable)
[ 0.000000] BIOS-e820: 00000000da4e5000 - 00000000da528000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000da528000 - 00000000da793000 (usable)
[ 0.000000] BIOS-e820: 00000000da793000 - 00000000da967000 (reserved)
[ 0.000000] BIOS-e820: 00000000da967000 - 00000000daa89000 (usable)
[ 0.000000] BIOS-e820: 00000000daa89000 - 00000000dad68000 (reserved)
[ 0.000000] BIOS-e820: 00000000dad68000 - 00000000dafe8000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000dafe8000 - 00000000db000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000db800000 - 00000000dfa00000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed04000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000041fe00000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.6 present.
[ 0.000000] DMI: Dell Inc. Vostro 3550/0JGC48, BIOS A09 09/30/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x41fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask C00000000 write-back
[ 0.000000] 1 base 400000000 mask FE0000000 write-back
[ 0.000000] 2 base 0DB800000 mask FFF800000 uncachable
[ 0.000000] 3 base 0DC000000 mask FFC000000 uncachable
[ 0.000000] 4 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 5 base 41FE00000 mask FFFE00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000db800000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xdaa89 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000daa89000
[ 0.000000] 0000000000 - 00daa00000 page 2M
[ 0.000000] 00daa00000 - 00daa89000 page 4k
[ 0.000000] kernel direct mapping tables up to daa89000 @ 1fffa000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-000000041fe00000
[ 0.000000] 0100000000 - 041fe00000 page 2M
[ 0.000000] kernel direct mapping tables up to 41fe00000 @ daa77000-daa89000
[ 0.000000] ACPI: RSDP 00000000000f0410 00024 (v02 DELL)
[ 0.000000] ACPI: XSDT 00000000dafe8078 00074 (v01 DELL WN09 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 00000000daff1d08 000F4 (v04 DELL WN09 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 00000000dafe8180 09B85 (v02 DELL WN09 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000dafe3f80 00040
[ 0.000000] ACPI: APIC 00000000daff1e00 00072 (v03 DELL WN09 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 00000000daff1e78 0003C (v01 DELL WN09 01072009 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000daff1eb8 004B0 (v01 TrmRef PtidDevc 00001000 INTL 20091112)
[ 0.000000] ACPI: SLIC 00000000daff2368 00176 (v01 DELL WN09 01072009 AMI 00010013)
[ 0.000000] ACPI: HPET 00000000daff24e0 00038 (v01 DELL WN09 01072009 AMI. 00000004)
[ 0.000000] ACPI: SSDT 00000000daff2518 00846 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 00000000daff2d60 00996 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: DMAR 00000000daff36f8 000E8 (v01 INTEL SNB 00000001 INTL 00000001)
[ 0.000000] ACPI: OSFR 00000000daff37e0 00086 (v01 DELL M08 07DB091E ASL 00000061)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000041fe00000
[ 0.000000] Initmem setup node 0 0000000000000000-000000041fe00000
[ 0.000000] NODE_DATA [000000041fdfc000 - 000000041fdfffff]
[ 0.000000] [ffffea0000000000-ffffea000e7fffff] PMD -> [ffff88040f400000-ffff88041d5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0041fe00
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x00020000
[ 0.000000] 0: 0x00020200 -> 0x00040000
[ 0.000000] 0: 0x00040200 -> 0x000da4e5
[ 0.000000] 0: 0x000da528 -> 0x000da793
[ 0.000000] 0: 0x000da967 -> 0x000daa89
[ 0.000000] 0: 0x00100000 -> 0x0041fe00
[ 0.000000] On node 0 totalpages: 4170239
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3920 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 875690 pages, LIFO batch:31
[ 0.000000] Normal zone: 44793 pages used for memmap
[ 0.000000] Normal zone: 3231495 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[ 0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000
[ 0.000000] PM: Registered nosave memory: 00000000da4e5000 - 00000000da528000
[ 0.000000] PM: Registered nosave memory: 00000000da793000 - 00000000da967000
[ 0.000000] PM: Registered nosave memory: 00000000daa89000 - 00000000dad68000
[ 0.000000] PM: Registered nosave memory: 00000000dad68000 - 00000000dafe8000
[ 0.000000] PM: Registered nosave memory: 00000000dafe8000 - 00000000db000000
[ 0.000000] PM: Registered nosave memory: 00000000db000000 - 00000000db800000
[ 0.000000] PM: Registered nosave memory: 00000000db800000 - 00000000dfa00000
[ 0.000000] PM: Registered nosave memory: 00000000dfa00000 - 00000000f8000000
[ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000
[ 0.000000] PM: Registered nosave memory: 00000000fed04000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at dfa00000 (gap: dfa00000:18600000)
[ 0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 25 pages/cpu @ffff88041fa00000 s72448 r8192 d21760 u524288
[ 0.000000] pcpu-alloc: s72448 r8192 d21760 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4111105
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/sda5 pciehp.pciehp_debug=1 usbcore.autosuspend=0
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 16372132k/17299456k available (5719k kernel code, 618500k absent, 308824k reserved, 3607k data, 544k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:4352 nr_irqs:712 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.010000] Detected 2793.753 MHz processor.
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5587.50 BogoMIPS (lpj=27937530)
[ 0.000190] pid_max: default: 32768 minimum: 301
[ 0.001163] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.004166] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.005541] Mount-cache hash table entries: 256
[ 0.005804] CPU: Physical Processor ID: 0
[ 0.005897] CPU: Processor Core ID: 0
[ 0.005991] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.005992] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.006181] mce: CPU supports 7 MCE banks
[ 0.006282] CPU0: Thermal monitoring enabled (TM1)
[ 0.006379] using mwait in idle threads.
[ 0.006529] ACPI: Core revision 20120320
[ 0.019196] DMAR: Host address width 36
[ 0.019289] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.019388] IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ 0.019531] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.019629] IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.019775] DMAR: RMRR base: 0x000000dad53000 end: 0x000000dad61fff
[ 0.019873] DMAR: RMRR base: 0x000000db800000 end: 0x000000df9fffff
[ 0.020037] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.020132] HPET id 0 under DRHD base 0xfed91000
[ 0.020225] HPET id 0 under DRHD base 0xfed91000
[ 0.020317] HPET id 0 under DRHD base 0xfed91000
[ 0.020410] HPET id 0 under DRHD base 0xfed91000
[ 0.020503] HPET id 0 under DRHD base 0xfed91000
[ 0.020596] HPET id 0 under DRHD base 0xfed91000
[ 0.020689] HPET id 0 under DRHD base 0xfed91000
[ 0.020782] HPET id 0 under DRHD base 0xfed91000
[ 0.021037] Enabled IRQ remapping in x2apic mode
[ 0.021129] Enabling x2apic
[ 0.021220] Enabled x2apic
[ 0.021314] Switched APIC routing to cluster x2apic.
[ 0.021842] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.121796] CPU0: Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz stepping 07
[ 0.236479] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
[ 0.236780] PEBS disabled due to CPU errata.
[ 0.236873] ... version: 3
[ 0.236964] ... bit width: 48
[ 0.237056] ... generic registers: 4
[ 0.237149] ... value mask: 0000ffffffffffff
[ 0.237244] ... max period: 000000007fffffff
[ 0.238658] ... fixed-purpose events: 3
[ 0.238750] ... event mask: 000000070000000f
[ 0.238931] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.239102] Booting Node 0, Processors #1
[ 0.252300] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.252561] #2
[ 0.265717] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.265980] #3 Ok.
[ 0.279180] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.279297] Brought up 4 CPUs
[ 0.279388] Total of 4 processors activated (22350.02 BogoMIPS).
[ 0.282415] devtmpfs: initialized
[ 0.282676] PM: Registering ACPI NVS region [mem 0xda4e5000-0xda527fff] (274432 bytes)
[ 0.282832] PM: Registering ACPI NVS region [mem 0xdad68000-0xdafe7fff] (2621440 bytes)
[ 0.283101] xor: automatically using best checksumming function: generic_sse
[ 0.326343] generic_sse: 12455.200 MB/sec
[ 0.326436] xor: using function: generic_sse (12455.200 MB/sec)
[ 0.326663] dummy:
[ 0.326823] NET: Registered protocol family 16
[ 0.327223] ACPI: bus type pci registered
[ 0.327410] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.327558] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.334707] PCI: Using configuration type 1 for base access
[ 0.340687] bio: create slab <bio-0> at 0
[ 0.506092] raid6: int64x1 2922 MB/s
[ 0.675829] raid6: int64x2 3002 MB/s
[ 0.845560] raid6: int64x4 2722 MB/s
[ 1.015322] raid6: int64x8 1729 MB/s
[ 1.185053] raid6: sse2x1 7521 MB/s
[ 1.354794] raid6: sse2x2 9299 MB/s
[ 1.524533] raid6: sse2x4 10549 MB/s
[ 1.524625] raid6: using algorithm sse2x4 (10549 MB/s)
[ 1.524761] ACPI: Added _OSI(Module Device)
[ 1.524852] ACPI: Added _OSI(Processor Device)
[ 1.524945] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 1.525038] ACPI: Added _OSI(Processor Aggregator Device)
[ 1.526355] ACPI: EC: Look up EC in DSDT
[ 1.527669] ACPI: Executed 1 blocks of module-level executable AML code
[ 1.532164] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 1.536915] ACPI: SSDT 00000000dad51698 0064F (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 1.537456] ACPI: Dynamic OEM Table Load:
[ 1.537625] ACPI: SSDT (null) 0064F (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 1.538201] ACPI: SSDT 00000000dad52a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 1.538779] ACPI: Dynamic OEM Table Load:
[ 1.538948] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 1.547474] ACPI: SSDT 00000000dad50d98 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 1.548005] ACPI: Dynamic OEM Table Load:
[ 1.548176] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 1.548963] ACPI: Interpreter enabled
[ 1.549058] ACPI: (supports S0 S1 S3 S4 S5)
[ 1.549366] ACPI: Using IOAPIC for interrupt routing
[ 1.575339] ACPI: No dock devices found.
[ 1.575435] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 1.575906] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 1.576441] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 1.576538] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 1.576635] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 1.576779] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[ 1.576923] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 1.577068] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 1.577213] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
[ 1.577357] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
[ 1.577501] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
[ 1.577646] pci_root PNP0A08:00: host bridge window [mem 0xdfa00000-0xfeafffff]
[ 1.577791] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
[ 1.577982] PCI host bridge to bus 0000:00
[ 1.578075] pci_bus 0000:00: busn_res: [bus 00-3e] for root bus
[ 1.578077] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 1.578172] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 1.578269] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 1.578366] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 1.578463] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 1.578560] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 1.578656] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 1.578753] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 1.578850] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 1.578946] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 1.579044] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff]
[ 1.579141] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[ 1.579243] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[ 1.579276] pci 0000:00:02.0: [8086:0126] type 00 class 0x030000
[ 1.579286] pci 0000:00:02.0: reg 10: [mem 0xf6800000-0xf6bfffff 64bit]
[ 1.579291] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 1.579295] pci 0000:00:02.0: reg 20: [io 0xf000-0xf03f]
[ 1.579346] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 1.579368] pci 0000:00:16.0: reg 10: [mem 0xf7f0a000-0xf7f0a00f 64bit]
[ 1.579442] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 1.579476] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 1.579496] pci 0000:00:1a.0: reg 10: [mem 0xf7f08000-0xf7f083ff]
[ 1.579584] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 1.579610] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 1.579625] pci 0000:00:1b.0: reg 10: [mem 0xf7f00000-0xf7f03fff 64bit]
[ 1.579692] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.579716] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 1.579793] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.579818] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[ 1.579895] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 1.579922] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[ 1.579998] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 1.580029] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[ 1.580160] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 1.580202] pci 0000:00:1c.7: [8086:1c1e] type 01 class 0x060400
[ 1.580335] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[ 1.580376] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 1.580397] pci 0000:00:1d.0: reg 10: [mem 0xf7f07000-0xf7f073ff]
[ 1.580485] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 1.580512] pci 0000:00:1f.0: [8086:1c4b] type 00 class 0x060100
[ 1.580634] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[ 1.580652] pci 0000:00:1f.2: reg 10: [io 0xf0b0-0xf0b7]
[ 1.580659] pci 0000:00:1f.2: reg 14: [io 0xf0a0-0xf0a3]
[ 1.580667] pci 0000:00:1f.2: reg 18: [io 0xf090-0xf097]
[ 1.580675] pci 0000:00:1f.2: reg 1c: [io 0xf080-0xf083]
[ 1.580683] pci 0000:00:1f.2: reg 20: [io 0xf060-0xf07f]
[ 1.580691] pci 0000:00:1f.2: reg 24: [mem 0xf7f06000-0xf7f067ff]
[ 1.580734] pci 0000:00:1f.2: PME# supported from D3hot
[ 1.580752] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 1.580767] pci 0000:00:1f.3: reg 10: [mem 0xf7f05000-0xf7f050ff 64bit]
[ 1.580787] pci 0000:00:1f.3: reg 20: [io 0xf040-0xf05f]
[ 1.580817] pci 0000:00:1c.0: check if busn 03-04 is in busn_res: [bus 00-3e]
[ 1.580864] pci_bus 0000:03: busn_res: [bus 03-04] is inserted under [bus 00-3e]
[ 1.580867] pci 0000:00:1c.0: PCI bridge to [bus 03-04]
[ 1.580973] pci 0000:00:1c.1: check if busn 05-06 is in busn_res: [bus 00-3e]
[ 1.581017] pci_bus 0000:05: busn_res: [bus 05-06] is inserted under [bus 00-3e]
[ 1.581043] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
[ 1.581063] pci 0000:05:00.0: reg 10: [io 0xe000-0xe0ff]
[ 1.581096] pci 0000:05:00.0: reg 18: [mem 0xf1104000-0xf1104fff 64bit pref]
[ 1.581118] pci 0000:05:00.0: reg 20: [mem 0xf1100000-0xf1103fff 64bit pref]
[ 1.581208] pci 0000:05:00.0: supports D1 D2
[ 1.581210] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.600286] pci 0000:00:1c.1: PCI bridge to [bus 05-06]
[ 1.600420] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
[ 1.600429] pci 0000:00:1c.1: bridge window [mem 0xf1100000-0xf11fffff 64bit pref]
[ 1.600433] pci 0000:00:1c.3: check if busn 09-0a is in busn_res: [bus 00-3e]
[ 1.600477] pci_bus 0000:09: busn_res: [bus 09-0a] is inserted under [bus 00-3e]
[ 1.600634] pci 0000:09:00.0: [8086:008a] type 00 class 0x028000
[ 1.600781] pci 0000:09:00.0: reg 10: [mem 0xf7e00000-0xf7e01fff 64bit]
[ 1.601472] pci 0000:09:00.0: PME# supported from D0 D3hot D3cold
[ 1.620348] pci 0000:00:1c.3: PCI bridge to [bus 09-0a]
[ 1.620457] pci 0000:00:1c.3: bridge window [mem 0xf7e00000-0xf7efffff]
[ 1.620466] pci 0000:00:1c.4: check if busn 0b-0c is in busn_res: [bus 00-3e]
[ 1.620535] pci_bus 0000:0b: busn_res: [bus 0b-0c] is inserted under [bus 00-3e]
[ 1.620563] pci 0000:0b:00.0: [104c:8241] type 00 class 0x0c0330
[ 1.620587] pci 0000:0b:00.0: reg 10: [mem 0xf7d00000-0xf7d0ffff 64bit]
[ 1.620607] pci 0000:0b:00.0: reg 18: [mem 0xf7d10000-0xf7d11fff 64bit]
[ 1.620711] pci 0000:0b:00.0: supports D1 D2
[ 1.620712] pci 0000:0b:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.640221] pci 0000:00:1c.4: PCI bridge to [bus 0b-0c]
[ 1.640363] pci 0000:00:1c.4: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 1.640375] pci 0000:00:1c.7: check if busn 11-16 is in busn_res: [bus 00-3e]
[ 1.640443] pci_bus 0000:11: busn_res: [bus 11-16] is inserted under [bus 00-3e]
[ 1.640446] pci 0000:00:1c.7: PCI bridge to [bus 11-16]
[ 1.640544] pci 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
[ 1.640549] pci 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff]
[ 1.640557] pci 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
[ 1.640609] pci 0000:00:1c.0: PCI bridge to [bus 03-04]
[ 1.640719] pci 0000:00:1c.1: PCI bridge to [bus 05-06]
[ 1.640814] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
[ 1.640822] pci 0000:00:1c.1: bridge window [mem 0xf1100000-0xf11fffff 64bit pref]
[ 1.640854] pci 0000:00:1c.3: PCI bridge to [bus 09-0a]
[ 1.640953] pci 0000:00:1c.3: bridge window [mem 0xf7e00000-0xf7efffff]
[ 1.640971] pci 0000:00:1c.4: PCI bridge to [bus 0b-0c]
[ 1.641072] pci 0000:00:1c.4: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 1.641090] pci 0000:00:1c.7: PCI bridge to [bus 11-16]
[ 1.641187] pci 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
[ 1.641192] pci 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff]
[ 1.641200] pci 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
[ 1.641206] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.641376] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 1.641413] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 1.641452] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 1.641489] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[ 1.641541] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP08._PRT]
[ 1.641671] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 1.641975] pci0000:00: ACPI _OSC control (0x19) granted
[ 1.646661] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 1.647228] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 1.647792] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
[ 1.648354] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 1.648916] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.649604] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.650296] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 1.650857] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 1.651413] acpi root: \_SB_.PCI0 notify handler installed
[ 1.651463] Found 1 acpi root devices
[ 1.651547] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.651699] vgaarb: loaded
[ 1.651789] vgaarb: bridge control possible 0000:00:02.0
[ 1.652018] SCSI subsystem initialized
[ 1.652175] libata version 3.00 loaded.
[ 1.652277] usbcore: registered new interface driver usbfs
[ 1.652393] usbcore: registered new interface driver hub
[ 1.652514] usbcore: registered new device driver usb
[ 1.652666] Linux media interface: v0.10
[ 1.652778] Linux video capture interface: v2.00
[ 1.653230] wmi: Mapper loaded
[ 1.653365] Advanced Linux Sound Architecture Driver Version 1.0.25.
[ 1.653460] PCI: Using ACPI for IRQ routing
[ 1.655499] PCI: pci_cache_line_size set to 64 bytes
[ 1.655605] reserve RAM buffer: 000000000009d400 - 000000000009ffff
[ 1.655608] reserve RAM buffer: 00000000da4e5000 - 00000000dbffffff
[ 1.655611] reserve RAM buffer: 00000000da793000 - 00000000dbffffff
[ 1.655613] reserve RAM buffer: 00000000daa89000 - 00000000dbffffff
[ 1.655616] reserve RAM buffer: 000000041fe00000 - 000000041fffffff
[ 1.655750] Bluetooth: Core ver 2.16
[ 1.655862] NET: Registered protocol family 31
[ 1.655955] Bluetooth: HCI device and connection manager initialized
[ 1.656051] Bluetooth: HCI socket layer initialized
[ 1.656145] Bluetooth: L2CAP socket layer initialized
[ 1.656241] Bluetooth: SCO socket layer initialized
[ 1.656398] cfg80211: Calling CRDA to update world regulatory domain
[ 1.656604] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 1.657051] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 1.659155] Switching to clocksource hpet
[ 1.659324] pnp: PnP ACPI init
[ 1.659423] ACPI: bus type pnp registered
[ 1.659758] pnp 00:00: [bus 00-3e]
[ 1.659760] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 1.659761] pnp 00:00: [io 0x0cf8-0x0cff]
[ 1.659763] pnp 00:00: [io 0x0d00-0xffff window]
[ 1.659765] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 1.659766] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 1.659768] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 1.659769] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 1.659771] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 1.659772] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 1.659774] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 1.659776] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 1.659777] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 1.659779] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 1.659780] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 1.659782] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 1.659783] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 1.659785] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 1.659786] pnp 00:00: [mem 0xdfa00000-0xfeafffff window]
[ 1.659788] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 1.659855] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 1.659866] pnp 00:01: [io 0x0000-0x001f]
[ 1.659868] pnp 00:01: [io 0x0081-0x0091]
[ 1.659869] pnp 00:01: [io 0x0093-0x009f]
[ 1.659870] pnp 00:01: [io 0x00c0-0x00df]
[ 1.659872] pnp 00:01: [dma 4]
[ 1.659912] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 1.659920] pnp 00:02: [mem 0xff000000-0xffffffff]
[ 1.659959] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 1.660032] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 1.660073] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 1.660085] pnp 00:04: [io 0x002e-0x002f]
[ 1.660086] pnp 00:04: [io 0x004e-0x004f]
[ 1.660087] pnp 00:04: [io 0x0061]
[ 1.660089] pnp 00:04: [io 0x0063]
[ 1.660090] pnp 00:04: [io 0x0065]
[ 1.660091] pnp 00:04: [io 0x0067]
[ 1.660092] pnp 00:04: [io 0x0070]
[ 1.660093] pnp 00:04: [io 0x0080]
[ 1.660095] pnp 00:04: [io 0x0092]
[ 1.660096] pnp 00:04: [io 0x00b2-0x00b3]
[ 1.660097] pnp 00:04: [io 0x0680-0x069f]
[ 1.660099] pnp 00:04: [io 0x1000-0x100f]
[ 1.660100] pnp 00:04: [io 0xffff]
[ 1.660101] pnp 00:04: [io 0xffff]
[ 1.660102] pnp 00:04: [io 0x0400-0x0453]
[ 1.660104] pnp 00:04: [io 0x0458-0x047f]
[ 1.660105] pnp 00:04: [io 0x0500-0x057f]
[ 1.660106] pnp 00:04: [io 0x164e-0x164f]
[ 1.660162] system 00:04: [io 0x0680-0x069f] has been reserved
[ 1.660259] system 00:04: [io 0x1000-0x100f] has been reserved
[ 1.660354] system 00:04: [io 0xffff] has been reserved
[ 1.660448] system 00:04: [io 0xffff] has been reserved
[ 1.660544] system 00:04: [io 0x0400-0x0453] has been reserved
[ 1.660638] system 00:04: [io 0x0458-0x047f] has been reserved
[ 1.660734] system 00:04: [io 0x0500-0x057f] has been reserved
[ 1.660829] system 00:04: [io 0x164e-0x164f] has been reserved
[ 1.660925] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.660933] pnp 00:05: [io 0x0070-0x0077]
[ 1.660943] pnp 00:05: [irq 8]
[ 1.660983] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.661009] pnp 00:06: [io 0x0454-0x0457]
[ 1.661061] system 00:06: [io 0x0454-0x0457] has been reserved
[ 1.661156] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 1.661164] pnp 00:07: [io 0x00f0-0x00ff]
[ 1.661170] pnp 00:07: [irq 13]
[ 1.661212] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 1.661228] pnp 00:08: [io 0x0010-0x001f]
[ 1.661229] pnp 00:08: [io 0x0022-0x003f]
[ 1.661230] pnp 00:08: [io 0x0044-0x005f]
[ 1.661232] pnp 00:08: [io 0x0068-0x006f]
[ 1.661233] pnp 00:08: [io 0x0072-0x007f]
[ 1.661234] pnp 00:08: [io 0x0080]
[ 1.661235] pnp 00:08: [io 0x0084-0x0086]
[ 1.661237] pnp 00:08: [io 0x0088]
[ 1.661238] pnp 00:08: [io 0x008c-0x008e]
[ 1.661240] pnp 00:08: [io 0x0090-0x009f]
[ 1.661241] pnp 00:08: [io 0x00a2-0x00bf]
[ 1.661242] pnp 00:08: [io 0x00e0-0x00ef]
[ 1.661244] pnp 00:08: [io 0x04d0-0x04d1]
[ 1.661245] pnp 00:08: [mem 0xfe800000-0xfe802fff]
[ 1.661302] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 1.661398] system 00:08: [mem 0xfe800000-0xfe802fff] has been reserved
[ 1.661495] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.661512] pnp 00:09: [irq 12]
[ 1.661556] pnp 00:09: Plug and Play ACPI device, IDs DLL04b3 SYN0600 SYN0002 PNP0f13 (active)
[ 1.661570] pnp 00:0a: [io 0x0060]
[ 1.661571] pnp 00:0a: [io 0x0064]
[ 1.661572] pnp 00:0a: [io 0x0062]
[ 1.661573] pnp 00:0a: [io 0x0066]
[ 1.661579] pnp 00:0a: [irq 1]
[ 1.661622] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active)
[ 1.661813] pnp 00:0b: [mem 0xfed1c000-0xfed1ffff]
[ 1.661814] pnp 00:0b: [mem 0xfed10000-0xfed17fff]
[ 1.661816] pnp 00:0b: [mem 0xfed18000-0xfed18fff]
[ 1.661817] pnp 00:0b: [mem 0xfed19000-0xfed19fff]
[ 1.661818] pnp 00:0b: [mem 0xf8000000-0xfbffffff]
[ 1.661820] pnp 00:0b: [mem 0xfed20000-0xfed3ffff]
[ 1.661821] pnp 00:0b: [mem 0xfed90000-0xfed93fff]
[ 1.661823] pnp 00:0b: [mem 0xfed45000-0xfed8ffff]
[ 1.661824] pnp 00:0b: [mem 0xff000000-0xffffffff]
[ 1.661825] pnp 00:0b: [mem 0xfee00000-0xfeefffff]
[ 1.661827] pnp 00:0b: [mem 0xdfa00000-0xdfa00fff]
[ 1.661893] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.661990] system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved
[ 1.662087] system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved
[ 1.662185] system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved
[ 1.662281] system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved
[ 1.662377] system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.662474] system 00:0b: [mem 0xfed90000-0xfed93fff] has been reserved
[ 1.662571] system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 1.662668] system 00:0b: [mem 0xff000000-0xffffffff] has been reserved
[ 1.662765] system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 1.662862] system 00:0b: [mem 0xdfa00000-0xdfa00fff] has been reserved
[ 1.662959] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.663017] pnp 00:0c: [irq 20]
[ 1.663074] pnp 00:0c: Plug and Play ACPI device, IDs SMO8800 (active)
[ 1.663184] pnp 00:0d: [mem 0x20000000-0x201fffff]
[ 1.663186] pnp 00:0d: [mem 0x40000000-0x401fffff]
[ 1.663255] system 00:0d: [mem 0x20000000-0x201fffff] has been reserved
[ 1.663353] system 00:0d: [mem 0x40000000-0x401fffff] has been reserved
[ 1.663449] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 1.663492] pnp: PnP ACPI: found 14 devices
[ 1.663584] ACPI: ACPI bus type pnp unregistered
[ 1.671708] pci 0000:00:1c.0: PCI bridge to [bus 03-04]
[ 1.671813] pci 0000:00:1c.1: PCI bridge to [bus 05-06]
[ 1.671908] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
[ 1.672009] pci 0000:00:1c.1: bridge window [mem 0xf1100000-0xf11fffff 64bit pref]
[ 1.672159] pci 0000:00:1c.3: PCI bridge to [bus 09-0a]
[ 1.672256] pci 0000:00:1c.3: bridge window [mem 0xf7e00000-0xf7efffff]
[ 1.672359] pci 0000:00:1c.4: PCI bridge to [bus 0b-0c]
[ 1.672458] pci 0000:00:1c.4: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 1.672565] pci 0000:00:1c.7: PCI bridge to [bus 11-16]
[ 1.672660] pci 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
[ 1.674081] pci 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff]
[ 1.674181] pci 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
[ 1.674370] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.674372] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.674373] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.674375] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 1.674377] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 1.674378] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 1.674380] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[ 1.674381] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
[ 1.674383] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
[ 1.674384] pci_bus 0000:00: resource 13 [mem 0xdfa00000-0xfeafffff]
[ 1.674386] pci_bus 0000:00: resource 14 [mem 0xfed40000-0xfed44fff]
[ 1.674388] pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
[ 1.674389] pci_bus 0000:05: resource 2 [mem 0xf1100000-0xf11fffff 64bit pref]
[ 1.674391] pci_bus 0000:09: resource 1 [mem 0xf7e00000-0xf7efffff]
[ 1.674393] pci_bus 0000:0b: resource 1 [mem 0xf7d00000-0xf7dfffff]
[ 1.674394] pci_bus 0000:11: resource 0 [io 0xc000-0xdfff]
[ 1.674396] pci_bus 0000:11: resource 1 [mem 0xf6c00000-0xf7cfffff]
[ 1.674398] pci_bus 0000:11: resource 2 [mem 0xf0000000-0xf10fffff 64bit pref]
[ 1.674467] NET: Registered protocol family 2
[ 1.674821] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 1.675806] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.677022] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.677244] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.677341] TCP: reno registered
[ 1.677447] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 1.677593] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 1.677795] NET: Registered protocol family 1
[ 1.677900] pci 0000:00:02.0: Boot video device
[ 1.919046] PCI: CLS 64 bytes, default 64
[ 1.919105] DMAR: No ATSR found
[ 1.919220] IOMMU 0 0xfed90000: using Queued invalidation
[ 1.919315] IOMMU 1 0xfed91000: using Queued invalidation
[ 1.919410] IOMMU: Setting RMRR:
[ 1.919510] IOMMU: Setting identity map for device 0000:00:02.0 [0xdb800000 - 0xdf9fffff]
[ 1.920020] IOMMU: Setting identity map for device 0000:00:1d.0 [0xdad53000 - 0xdad61fff]
[ 1.920184] IOMMU: Setting identity map for device 0000:00:1a.0 [0xdad53000 - 0xdad61fff]
[ 1.920339] IOMMU: Prepare 0-16MiB unity mapping for LPC
[ 1.920439] IOMMU: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff]
[ 1.920879] PCI-DMA: Intel(R) Virtualization Technology for Directed I/O
[ 1.923685] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x1b
[ 1.923788] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x1b
[ 1.923890] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x1b
[ 1.923993] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x1b
[ 1.924133] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.925157] sha1_ssse3: Using AVX optimized SHA-1 implementation
[ 1.926378] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.928252] DLM installed
[ 1.928478] msgmni has been set to 32105
[ 1.929756] NET: Registered protocol family 38
[ 1.929850] async_tx: api initialized (async)
[ 1.929983] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.930128] io scheduler noop registered
[ 1.930220] io scheduler deadline registered
[ 1.930331] io scheduler cfq registered (default)
[ 1.930763] pcieport 0000:00:1c.7: irq 42 for MSI/MSI-X
[ 1.930976] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.931155] pciehp 0000:00:1c.7:pcie04: Hotplug Controller:
[ 1.931251] pciehp 0000:00:1c.7:pcie04: Seg/Bus/Dev/Func/IRQ : 0000:00:1c.7 IRQ 42
[ 1.931396] pciehp 0000:00:1c.7:pcie04: Vendor ID : 0x8086
[ 1.931494] pciehp 0000:00:1c.7:pcie04: Device ID : 0x1c1e
[ 1.931590] pciehp 0000:00:1c.7:pcie04: Subsystem ID : 0x04b3
[ 1.931687] pciehp 0000:00:1c.7:pcie04: Subsystem Vendor ID : 0x1028
[ 1.931784] pciehp 0000:00:1c.7:pcie04: PCIe Cap offset : 0x40
[ 1.931881] pciehp 0000:00:1c.7:pcie04: PCI resource [13] : [io 0xc000-0xdfff]
[ 1.932026] pciehp 0000:00:1c.7:pcie04: PCI resource [14] : [mem 0xf6c00000-0xf7cfffff]
[ 1.932173] pciehp 0000:00:1c.7:pcie04: PCI resource [15] : [mem 0xf0000000-0xf10fffff 64bit pref]
[ 1.932322] pciehp 0000:00:1c.7:pcie04: Slot Capabilities : 0x003cb260
[ 1.932419] pciehp 0000:00:1c.7:pcie04: Physical Slot Number : 7
[ 1.932516] pciehp 0000:00:1c.7:pcie04: Attention Button : no
[ 1.932611] pciehp 0000:00:1c.7:pcie04: Power Controller : no
[ 1.932708] pciehp 0000:00:1c.7:pcie04: MRL Sensor : no
[ 1.932804] pciehp 0000:00:1c.7:pcie04: Attention Indicator : no
[ 1.932900] pciehp 0000:00:1c.7:pcie04: Power Indicator : no
[ 1.932996] pciehp 0000:00:1c.7:pcie04: Hot-Plug Surprise : yes
[ 1.933092] pciehp 0000:00:1c.7:pcie04: EMI Present : no
[ 1.933188] pciehp 0000:00:1c.7:pcie04: Command Completed : no
[ 1.933286] pciehp 0000:00:1c.7:pcie04: Slot Status : 0x0000
[ 1.933384] pciehp 0000:00:1c.7:pcie04: Slot Control : 0x0000
[ 1.933481] pciehp 0000:00:1c.7:pcie04: Link Active Reporting supported
[ 1.933490] pciehp 0000:00:1c.7:pcie04: HPC vendor_id 8086 device_id 1c1e ss_vid 1028 ss_did 4b3
[ 1.933639] pciehp 0000:00:1c.7:pcie04: Registering domain:bus:dev=0000:11:00 sun=7
[ 1.933688] pciehp 0000:00:1c.7:pcie04: pciehp_get_power_status: SLOTCTRL 58 value read 1028
[ 1.933690] pciehp 0000:00:1c.7:pcie04: service driver pciehp loaded
[ 1.933716] pciehp: pcie_port_service_register = 0
[ 1.933717] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.933814] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 1.934239] intel_idle: MWAIT substates: 0x21120
[ 1.934240] intel_idle: v0.4 model 0x2A
[ 1.934241] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.934347] ACPI: AC Adapter [AC] (on-line)
[ 1.934551] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 1.936288] ACPI: Lid Switch [LID0]
[ 1.936439] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 1.936586] ACPI: Power Button [PWRB]
[ 1.936736] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 1.936882] ACPI: Sleep Button [SBTN]
[ 1.937028] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.937173] ACPI: Power Button [PWRF]
[ 1.937526] ACPI: Requesting acpi_cpufreq
[ 1.947816] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.947912] ACPI: Thermal Zone [THM] (46 C)
[ 1.948110] GHES: HEST is not enabled!
[ 1.970931] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.971733] Non-volatile memory driver v1.3
[ 1.972151] i8k: unable to get SMM BIOS version
[ 1.975435] Dell laptop SMM driver v1.14 21/02/2005 Massimo Dal Zotto (dz@debian.org)
[ 1.975641] Linux agpgart interface v0.103
[ 1.975780] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
[ 1.975955] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 1.977145] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[ 1.977386] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 1.977557] ipmi message handler version 39.2
[ 1.977656] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
[ 1.977801] Hangcheck: Using getrawmonotonic().
[ 1.977931] [drm] Initialized drm 1.1.0 20060810
[ 1.978286] i915 0000:00:02.0: setting latency timer to 64
[ 1.979274] ACPI: Battery Slot [BAT0] (battery present)
[ 2.014536] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
[ 2.014683] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 2.015152] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[ 2.015164] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 2.015272] [drm] Driver supports precise vblank timestamp query.
[ 2.015395] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.440087] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 2.917395] Refined TSC clocksource calibration: 2793.653 MHz.
[ 2.917523] Switching to clocksource tsc
[ 2.994454] fbcon: inteldrmfb (fb0) is primary device
[ 3.495716] Console: switching to colour frame buffer device 170x48
[ 3.498428] fb0: inteldrmfb frame buffer device
[ 3.498429] drm: registered panic notifier
[ 3.499659] acpi device:34: registered as cooling_device4
[ 3.499891] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4
[ 3.499934] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 3.499995] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 3.500829] loop: module loaded
[ 3.500966] ahci 0000:00:1f.2: version 3.0
[ 3.501012] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
[ 3.501038] ahci: SSS flag set, parallel bus scan disabled
[ 3.516537] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x31 impl SATA mode
[ 3.516640] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
[ 3.516681] ahci 0000:00:1f.2: setting latency timer to 64
[ 3.557219] scsi0 : ahci
[ 3.557327] scsi1 : ahci
[ 3.557416] scsi2 : ahci
[ 3.557504] scsi3 : ahci
[ 3.557593] scsi4 : ahci
[ 3.557685] scsi5 : ahci
[ 3.558015] ata1: SATA max UDMA/133 abar m2048@0xf7f06000 port 0xf7f06100 irq 44
[ 3.558050] ata2: DUMMY
[ 3.558994] ata3: DUMMY
[ 3.559924] ata4: DUMMY
[ 3.560839] ata5: SATA max UDMA/133 abar m2048@0xf7f06000 port 0xf7f06300 irq 44
[ 3.561773] ata6: SATA max UDMA/133 abar m2048@0xf7f06000 port 0xf7f06380 irq 44
[ 3.562846] tun: Universal TUN/TAP device driver, 1.6
[ 3.563765] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 3.564747] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 3.565782] r8169 0000:05:00.0: irq 45 for MSI/MSI-X
[ 3.565943] r8169 0000:05:00.0: eth0: RTL8168e/8111e at 0xffffc900065d2000, 18:03:73:a0:6f:6a, XID 0c200000 IRQ 45
[ 3.566908] r8169 0000:05:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 3.567901] VMware vmxnet3 virtual NIC driver - version 1.1.29.0-k-NAPI
[ 3.568899] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.569855] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 3.569858] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 3.570787] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 3.571738] ehci_hcd 0000:00:1a.0: debug port 2
[ 3.576540] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 3.576553] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7f08000
[ 3.596391] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 3.597394] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.598306] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.599216] usb usb1: Product: EHCI Host Controller
[ 3.600113] usb usb1: Manufacturer: Linux 3.4.0-rc3-default ehci_hcd
[ 3.601026] usb usb1: SerialNumber: 0000:00:1a.0
[ 3.602047] hub 1-0:1.0: USB hub found
[ 3.602960] hub 1-0:1.0: 2 ports detected
[ 3.603937] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3.603940] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 3.604856] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 3.605799] ehci_hcd 0000:00:1d.0: debug port 2
[ 3.610607] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 3.610619] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7f07000
[ 3.626345] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 3.627337] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.628235] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.629127] usb usb2: Product: EHCI Host Controller
[ 3.630011] usb usb2: Manufacturer: Linux 3.4.0-rc3-default ehci_hcd
[ 3.630896] usb usb2: SerialNumber: 0000:00:1d.0
[ 3.631869] hub 2-0:1.0: USB hub found
[ 3.632733] hub 2-0:1.0: 2 ports detected
[ 3.633642] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.634573] xhci_hcd 0000:0b:00.0: xHCI Host Controller
[ 3.635454] xhci_hcd 0000:0b:00.0: new USB bus registered, assigned bus number 3
[ 3.636541] xhci_hcd 0000:0b:00.0: irq 16, io mem 0xf7d00000
[ 3.637521] xhci_hcd 0000:0b:00.0: irq 46 for MSI/MSI-X
[ 3.637525] xhci_hcd 0000:0b:00.0: irq 47 for MSI/MSI-X
[ 3.637530] xhci_hcd 0000:0b:00.0: irq 48 for MSI/MSI-X
[ 3.637534] xhci_hcd 0000:0b:00.0: irq 49 for MSI/MSI-X
[ 3.637538] xhci_hcd 0000:0b:00.0: irq 50 for MSI/MSI-X
[ 3.637632] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.638555] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.639477] usb usb3: Product: xHCI Host Controller
[ 3.640385] usb usb3: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
[ 3.641312] usb usb3: SerialNumber: 0000:0b:00.0
[ 3.642315] xHCI xhci_add_endpoint called for root hub
[ 3.642316] xHCI xhci_check_bandwidth called for root hub
[ 3.642355] hub 3-0:1.0: USB hub found
[ 3.643289] hub 3-0:1.0: 2 ports detected
[ 3.644267] xhci_hcd 0000:0b:00.0: xHCI Host Controller
[ 3.645189] xhci_hcd 0000:0b:00.0: new USB bus registered, assigned bus number 4
[ 3.646135] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 3.647070] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.647984] usb usb4: Product: xHCI Host Controller
[ 3.648874] usb usb4: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
[ 3.649759] usb usb4: SerialNumber: 0000:0b:00.0
[ 3.650701] xHCI xhci_add_endpoint called for root hub
[ 3.650702] xHCI xhci_check_bandwidth called for root hub
[ 3.650737] hub 4-0:1.0: USB hub found
[ 3.651619] hub 4-0:1.0: 2 ports detected
[ 3.652583] usbcore: registered new interface driver uas
[ 3.653521] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2] at 0x60,0x64 irq 1,12
[ 3.656653] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.657553] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.658544] mousedev: PS/2 mouse device common for all mice
[ 3.659693] rtc_cmos 00:05: RTC can wake from S4
[ 3.660699] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 3.661605] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 3.662513] i2c /dev entries driver
[ 3.663771] gspca_main: v2.14.0 registered
[ 3.664692] usbcore: registered new interface driver uvcvideo
[ 3.665592] USB Video Class driver (1.1.1)
[ 3.666582] coretemp coretemp.0: TjMax is 100 degrees C
[ 3.666593] coretemp coretemp.0: TjMax is 100 degrees C
[ 3.666602] coretemp coretemp.0: TjMax is 100 degrees C
[ 3.666631] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 3.667606] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 3.668580] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 3.669502] iTCO_vendor_support: vendor-support=0
[ 3.670441] md: linear personality registered for level -1
[ 3.671355] md: raid0 personality registered for level 0
[ 3.672258] md: raid1 personality registered for level 1
[ 3.673157] md: raid10 personality registered for level 10
[ 3.673894] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 3.674985] md: raid6 personality registered for level 6
[ 3.675917] md: raid5 personality registered for level 5
[ 3.676855] md: raid4 personality registered for level 4
[ 3.677795] device-mapper: uevent: version 1.0.3
[ 3.678758] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 3.679729] device-mapper: dm-log-userspace: version 1.1.0 loaded
[ 3.680677] usbcore: registered new interface driver btusb
[ 3.681681] cpuidle: using governor ladder
[ 3.682687] cpuidle: using governor menu
[ 3.683633] sdhci: Secure Digital Host Controller Interface driver
[ 3.684545] sdhci: Copyright(c) Pierre Ossman
[ 3.685929] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 3.687710] usbcore: registered new interface driver usbhid
[ 3.688637] usbhid: USB HID core driver
[ 3.689650] mei 0000:00:16.0: setting latency timer to 64
[ 3.689696] mei 0000:00:16.0: irq 51 for MSI/MSI-X
[ 3.711880] input: Dell WMI hotkeys as /devices/virtual/input/input6
[ 3.729093] intel_oaktrail: Platform not recognized (You could try the module's force-parameter)
[ 3.729331] snd_hda_intel 0000:00:1b.0: irq 52 for MSI/MSI-X
[ 3.906023] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.912137] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 3.913455] ata1.00: ATA-8: WDC WD7500BPKT-75PK4T0, 01.01A01, max UDMA/133
[ 3.914504] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 3.915964] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 3.920535] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 3.921888] ata1.00: configured for UDMA/133
[ 3.936217] scsi 0:0:0:0: Direct-Access ATA WDC WD7500BPKT-7 01.0 PQ: 0 ANSI: 5
[ 3.937742] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[ 3.937852] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.939790] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 3.940871] sd 0:0:0:0: [sda] Write Protect is off
[ 3.941878] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.941943] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.034771] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 4.036972] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.066214] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 4.067278] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.068922] hub 1-1:1.0: USB hub found
[ 4.070076] hub 1-1:1.0: 6 ports detected
[ 4.185622] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 4.285435] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.293197] ata5.00: ATAPI: PLDS DVD+/-RW DS-8A8SH, KD11, max UDMA/100
[ 4.299654] ata5.00: configured for UDMA/100
[ 4.312912] scsi 4:0:0:0: CD-ROM PLDS DVD+-RW DS-8A8SH KD11 PQ: 0 ANSI: 5
[ 4.328160] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.329260] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.330631] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 4.330860] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 4.335940] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 4.337045] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.338629] hub 2-1:1.0: USB hub found
[ 4.339765] hub 2-1:1.0: 8 ports detected
[ 4.346814] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
[ 4.373979] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 4.375190] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 4.376404] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 4.378112] ALSA device list:
[ 4.379188] #0: HDA Intel PCH at 0xf7f00000 irq 52
[ 4.380342] TCP: cubic registered
[ 4.381412] NET: Registered protocol family 17
[ 4.382511] Bluetooth: RFCOMM TTY layer initialized
[ 4.383580] Bluetooth: RFCOMM socket layer initialized
[ 4.384637] Bluetooth: RFCOMM ver 1.11
[ 4.385678] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 4.386697] Bluetooth: BNEP filters: protocol multicast
[ 4.387712] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 4.389127] sctp: Hash tables configured (established 65536 bind 65536)
[ 4.390293] Registering the dns_resolver key type
[ 4.391604] PM: Checking hibernation image partition /dev/sda6
[ 4.391609] PM: Hibernation image partition 8:6 present
[ 4.391610] PM: Looking for hibernation image.
[ 4.399424] PM: Image not found (code -22)
[ 4.399430] PM: Hibernation image not present or could not be loaded.
[ 4.399455] registered taskstats version 1
[ 4.401642] rtc_cmos 00:05: setting system clock to 2012-04-24 22:33:12 UTC (1335306792)
[ 4.403484] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
[ 4.415295] usb 1-1.4: new full-speed USB device number 3 using ehci_hcd
[ 4.529571] usb 1-1.4: New USB device found, idVendor=8086, idProduct=0189
[ 4.530494] usb 1-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.605180] usb 1-1.5: new high-speed USB device number 4 using ehci_hcd
[ 4.658992] input: DualPoint Stick as /devices/platform/i8042/serio1/input/input11
[ 4.673855] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input12
[ 4.674782] ata6: SATA link down (SStatus 0 SControl 300)
[ 4.677550] md: Waiting for all devices to be available before autodetect
[ 4.678443] md: If you don't use raid, use raid=noautodetect
[ 4.679715] md: Autodetecting RAID arrays.
[ 4.680606] md: Scanned 0 and added 0 devices.
[ 4.681492] md: autorun ...
[ 4.682372] md: ... autorun DONE.
[ 4.723180] usb 1-1.5: New USB device found, idVendor=05ca, idProduct=1820
[ 4.724135] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.724991] usb 1-1.5: Product: Laptop_Integrated_Webcam_FHD
[ 4.725828] usb 1-1.5: Manufacturer: CN01MWM9724871A4KB28A00
[ 4.727739] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_FHD (05ca:1820)
[ 4.730718] input: Laptop_Integrated_Webcam_FHD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input13
[ 4.733726] kjournald starting. Commit interval 5 seconds
[ 4.733839] EXT3-fs (sda5): mounted filesystem with writeback data mode
[ 4.733846] VFS: Mounted root (ext3 filesystem) readonly on device 8:5.
[ 4.774913] devtmpfs: mounted
[ 4.775936] Freeing unused kernel memory: 544k freed
[ 4.824853] usb 2-1.2: new low-speed USB device number 3 using ehci_hcd
[ 4.942603] usb 2-1.2: New USB device found, idVendor=04f2, idProduct=0116
[ 4.943573] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.944441] usb 2-1.2: Product: USB Keyboard
[ 4.945277] usb 2-1.2: Manufacturer: CHICONY
[ 4.951958] input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input14
[ 4.953034] generic-usb 0003:04F2:0116.0001: input,hidraw0: USB HID v1.10 Keyboard [CHICONY USB Keyboard] on usb-0000:00:1d.0-1.2/input0
[ 5.044516] usb 2-1.3: new full-speed USB device number 4 using ehci_hcd
[ 5.155596] usb 2-1.3: New USB device found, idVendor=138a, idProduct=0011
[ 5.156597] usb 2-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[ 5.157502] usb 2-1.3: SerialNumber: 56ed5821afe2
[ 5.234233] usb 2-1.6: new high-speed USB device number 5 using ehci_hcd
[ 5.356855] usb 2-1.6: New USB device found, idVendor=0bda, idProduct=0138
[ 5.357840] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5.358751] usb 2-1.6: Product: USB2.0-CRW
[ 5.359652] usb 2-1.6: Manufacturer: Generic
[ 5.360539] usb 2-1.6: SerialNumber: 20090516388200000
[ 7.797412] udevd[1754]: starting version 171
[ 10.292341] ACPI Warning: 0x000000000000f040-0x000000000000f05f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120320/utaddress-251)
[ 10.292346] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.587389] Initializing USB Mass Storage driver...
[ 10.587479] scsi6 : usb-storage 2-1.6:1.0
[ 10.587557] usbcore: registered new interface driver usb-storage
[ 10.587559] USB Mass Storage support registered.
[ 11.269401] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d
[ 11.269402] Copyright(c) 2003-2012 Intel Corporation
[ 11.269579] iwlwifi 0000:09:00.0: pci_resource_len = 0x00002000
[ 11.269581] iwlwifi 0000:09:00.0: pci_resource_base = ffffc90006684000
[ 11.269582] iwlwifi 0000:09:00.0: HW Revision ID = 0x34
[ 11.269674] iwlwifi 0000:09:00.0: irq 53 for MSI/MSI-X
[ 11.353840] iwlwifi 0000:09:00.0: loaded firmware version 17.168.5.2 build 35905
[ 11.353959] iwlwifi 0000:09:00.0: CONFIG_IWLWIFI_DEBUG enabled
[ 11.353961] iwlwifi 0000:09:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[ 11.353962] iwlwifi 0000:09:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[ 11.353964] iwlwifi 0000:09:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled
[ 11.353965] iwlwifi 0000:09:00.0: CONFIG_IWLWIFI_P2P disabled
[ 11.353966] iwlwifi 0000:09:00.0: Detected Intel(R) Centrino(R) Wireless-N 1030 BGN, REV=0xB0
[ 11.354014] iwlwifi 0000:09:00.0: L1 Disabled; Enabling L0S
[ 11.371102] iwlwifi 0000:09:00.0: device EEPROM VER=0x71a, CALIB=0x6
[ 11.371104] iwlwifi 0000:09:00.0: Device SKU: 0x150
[ 11.371105] iwlwifi 0000:09:00.0: Valid Tx ant: 0x1, Valid Rx ant: 0x3
[ 11.371117] iwlwifi 0000:09:00.0: Tunable channels: 13 802.11bg, 0 802.11a channels
[ 11.371220] Registered led device: phy0-led
[ 11.371300] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 11.587320] scsi 6:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 11.587481] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 11.593043] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 11.849916] EXT3-fs (sda5): using internal journal
[ 12.089838] Adding 4998972k swap on /dev/sda6. Priority:-1 extents:1 across:4998972k
[ 16.038538] r8169 0000:05:00.0: eth0: unable to load firmware patch rtl_nic/rtl8168e-2.fw (-2)
[ 16.061694] r8169 0000:05:00.0: eth0: link down
[ 16.061726] r8169 0000:05:00.0: eth0: link down
[ 16.065388] iwlwifi 0000:09:00.0: L1 Disabled; Enabling L0S
[ 16.072156] iwlwifi 0000:09:00.0: Radio type=0x2-0x2-0x1
[ 16.163156] iwlwifi 0000:09:00.0: L1 Disabled; Enabling L0S
[ 16.169917] iwlwifi 0000:09:00.0: Radio type=0x2-0x2-0x1
[ 17.669519] r8169 0000:05:00.0: eth0: link up
[ 21.450680] [drm] Changing LVDS panel from (+hsync, -vsync) to (-hsync, -vsync)
[ 21.770070] microcode: CPU0 updated to revision 0x25, date = 2011-10-11
[ 21.770415] microcode: CPU1 updated to revision 0x25, date = 2011-10-11
[ 21.770745] microcode: CPU2 updated to revision 0x25, date = 2011-10-11
[ 21.771090] microcode: CPU3 updated to revision 0x25, date = 2011-10-11
[ 24.301248] r8169 0000:05:00.0: eth0: link down
[ 28.213622] r8169 0000:05:00.0: eth0: link up
[ 315.912007] [drm] Changing LVDS panel from (-hsync, -vsync) to (+hsync, -vsync)
[ 319.102349] ata1.00: configured for UDMA/133
[ 319.102353] ata1: EH complete
[ 419.207424] usb 3-1: new low-speed USB device number 2 using xhci_hcd
[ 419.261316] usb 3-1: New USB device found, idVendor=046d, idProduct=c050
[ 419.261326] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 419.261333] usb 3-1: Product: USB-PS/2 Optical Mouse
[ 419.261338] usb 3-1: Manufacturer: Logitech
[ 419.261518] usb 3-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 419.281503] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1c.4/0000:0b:00.0/usb3/3-1/3-1:1.0/input/input15
[ 419.281733] generic-usb 0003:046D:C050.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:0b:00.0-1/input0
[ 523.968585] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 108
[ 523.968595] pciehp 0000:00:1c.7:pcie04: LinkState change
[ 523.968598] pciehp 0000:00:1c.7:pcie04: lnk_status = 7011
[ 523.968599] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
[ 523.968602] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
[ 523.968640] pciehp 0000:00:1c.7:pcie04: Surprise Removal
[ 523.968653] pciehp 0000:00:1c.7:pcie04: check_link_active: lnk_status = 7011
[ 524.071206] pciehp 0000:00:1c.7:pcie04: pciehp_check_link_status: lnk_status = 7011
[ 524.071316] pci 0000:11:00.0: [1033:0194] type 00 class 0x0c0330
[ 524.071367] pci 0000:11:00.0: reg 10: [mem 0x00000000-0x00001fff 64bit]
[ 524.071620] pci 0000:11:00.0: PME# supported from D0 D3hot
[ 524.091233] pci 0000:11:00.0: BAR 0: assigned [mem 0xf6c00000-0xf6c01fff 64bit]
[ 524.091275] pcieport 0000:00:1c.7: PCI bridge to [bus 11-16]
[ 524.091278] pcieport 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
[ 524.091283] pcieport 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff]
[ 524.091287] pcieport 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
[ 524.091423] xhci_hcd 0000:11:00.0: enabling device (0100 -> 0102)
[ 524.091478] xhci_hcd 0000:11:00.0: xHCI Host Controller
[ 524.091482] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 5
[ 524.091783] xhci_hcd 0000:11:00.0: irq 19, io mem 0xf6c00000
[ 524.091885] xhci_hcd 0000:11:00.0: irq 54 for MSI/MSI-X
[ 524.091889] xhci_hcd 0000:11:00.0: irq 55 for MSI/MSI-X
[ 524.091893] xhci_hcd 0000:11:00.0: irq 56 for MSI/MSI-X
[ 524.091897] xhci_hcd 0000:11:00.0: irq 57 for MSI/MSI-X
[ 524.091901] xhci_hcd 0000:11:00.0: irq 58 for MSI/MSI-X
[ 524.092049] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 524.092051] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 524.092052] usb usb5: Product: xHCI Host Controller
[ 524.092053] usb usb5: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
[ 524.092054] usb usb5: SerialNumber: 0000:11:00.0
[ 524.092177] xHCI xhci_add_endpoint called for root hub
[ 524.092178] xHCI xhci_check_bandwidth called for root hub
[ 524.092201] hub 5-0:1.0: USB hub found
[ 524.092212] hub 5-0:1.0: 2 ports detected
[ 524.092281] xhci_hcd 0000:11:00.0: xHCI Host Controller
[ 524.092284] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 6
[ 524.095021] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[ 524.095024] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 524.095026] usb usb6: Product: xHCI Host Controller
[ 524.095028] usb usb6: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
[ 524.095030] usb usb6: SerialNumber: 0000:11:00.0
[ 524.095124] xHCI xhci_add_endpoint called for root hub
[ 524.095126] xHCI xhci_check_bandwidth called for root hub
[ 524.095157] hub 6-0:1.0: USB hub found
[ 524.095176] hub 6-0:1.0: 2 ports detected
[ 608.433641] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 108
[ 608.433644] pciehp 0000:00:1c.7:pcie04: LinkState change
[ 608.433647] pciehp 0000:00:1c.7:pcie04: lnk_status = 5011
[ 608.433648] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
[ 608.433651] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
[ 608.433691] pciehp 0000:00:1c.7:pcie04: Surprise Removal
[ 608.433702] pciehp 0000:00:1c.7:pcie04: Disabling domain:bus:device=0000:11:00
[ 608.433704] pciehp 0000:00:1c.7:pcie04: pciehp_unconfigure_device: domain:bus:dev = 0000:11:00
[ 608.445663] xhci_hcd 0000:11:00.0: remove, state 4
[ 608.445669] usb usb6: USB disconnect, device number 1
[ 608.445716] xHCI xhci_drop_endpoint called for root hub
[ 608.445718] xHCI xhci_check_bandwidth called for root hub
[ 608.445824] xhci_hcd 0000:11:00.0: Host not halted after 16000 microseconds.
[ 608.445828] xhci_hcd 0000:11:00.0: USB bus 6 deregistered
[ 608.445833] xhci_hcd 0000:11:00.0: remove, state 4
[ 608.445836] usb usb5: USB disconnect, device number 1
[ 608.445868] xHCI xhci_drop_endpoint called for root hub
[ 608.445869] xHCI xhci_check_bandwidth called for root hub
[ 608.446056] xhci_hcd 0000:11:00.0: Host not halted after 16000 microseconds.
[ 608.446149] xhci_hcd 0000:11:00.0: USB bus 5 deregistered
[ 608.446196] pci 0000:11:00.0: freeing pci_dev info
[ 608.449959] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 108
[ 608.449968] pciehp 0000:00:1c.7:pcie04: LinkState change
[ 608.449971] pciehp 0000:00:1c.7:pcie04: lnk_status = 7011
[ 608.449973] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
[ 608.449976] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
[ 608.449985] pciehp 0000:00:1c.7:pcie04: Surprise Removal
[ 608.450024] pciehp 0000:00:1c.7:pcie04: check_link_active: lnk_status = 7011
[ 608.555376] pciehp 0000:00:1c.7:pcie04: pciehp_check_link_status: lnk_status = 7011
[ 608.555478] pci 0000:11:00.0: [1033:0194] type 00 class 0x0c0330
[ 608.555529] pci 0000:11:00.0: reg 10: [mem 0x00000000-0x00001fff 64bit]
[ 608.555775] pci 0000:11:00.0: PME# supported from D0 D3hot
[ 608.575392] pci 0000:11:00.0: BAR 0: assigned [mem 0xf6c00000-0xf6c01fff 64bit]
[ 608.575434] pcieport 0000:00:1c.7: PCI bridge to [bus 11-16]
[ 608.575438] pcieport 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
[ 608.575443] pcieport 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff]
[ 608.575447] pcieport 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
[ 608.575575] xhci_hcd 0000:11:00.0: enabling device (0100 -> 0102)
[ 608.575649] xhci_hcd 0000:11:00.0: xHCI Host Controller
[ 608.575655] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 5
[ 608.575956] xhci_hcd 0000:11:00.0: irq 19, io mem 0xf6c00000
[ 608.576072] xhci_hcd 0000:11:00.0: irq 54 for MSI/MSI-X
[ 608.576076] xhci_hcd 0000:11:00.0: irq 55 for MSI/MSI-X
[ 608.576080] xhci_hcd 0000:11:00.0: irq 56 for MSI/MSI-X
[ 608.576084] xhci_hcd 0000:11:00.0: irq 57 for MSI/MSI-X
[ 608.576087] xhci_hcd 0000:11:00.0: irq 58 for MSI/MSI-X
[ 608.576238] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 608.576240] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 608.576241] usb usb5: Product: xHCI Host Controller
[ 608.576242] usb usb5: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
[ 608.576243] usb usb5: SerialNumber: 0000:11:00.0
[ 608.576357] xHCI xhci_add_endpoint called for root hub
[ 608.576359] xHCI xhci_check_bandwidth called for root hub
[ 608.576399] hub 5-0:1.0: USB hub found
[ 608.576411] hub 5-0:1.0: 2 ports detected
[ 608.576472] xhci_hcd 0000:11:00.0: xHCI Host Controller
[ 608.576475] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 6
[ 608.579188] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[ 608.579191] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 608.579193] usb usb6: Product: xHCI Host Controller
[ 608.579195] usb usb6: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
[ 608.579196] usb usb6: SerialNumber: 0000:11:00.0
[ 608.579297] xHCI xhci_add_endpoint called for root hub
[ 608.579299] xHCI xhci_check_bandwidth called for root hub
[ 608.579324] hub 6-0:1.0: USB hub found
[ 608.579342] hub 6-0:1.0: 2 ports detected
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: 3.2.11: PCI Express card cannot be re-detected withing cca 60sec timeframe
2012-04-24 20:48 ` Martin Mokrejs
@ 2012-04-26 16:08 ` Yinghai Lu
2012-04-26 22:08 ` Martin Mokrejs
0 siblings, 1 reply; 55+ messages in thread
From: Yinghai Lu @ 2012-04-26 16:08 UTC (permalink / raw)
To: Martin Mokrejs; +Cc: Sarah Sharp, linux-pci, Linux Kernel Mailing List
On Tue, Apr 24, 2012 at 1:48 PM, Martin Mokrejs
<mmokrejs@fold.natur.cuni.cz> wrote:
> (sorry for the re-send, now with the attached dmesg)
>
>
> With the express card itself (no USB devices attached to it) I do not see
> a difference. Is this what you wanted me to test?
>
so disabling autosuspend make no difference.
Can you try boot the system without loading xhci driver ?
Yinghai
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: 3.2.11: PCI Express card cannot be re-detected withing cca 60sec timeframe
2012-04-26 16:08 ` Yinghai Lu
@ 2012-04-26 22:08 ` Martin Mokrejs
2012-04-26 22:44 ` Yinghai Lu
0 siblings, 1 reply; 55+ messages in thread
From: Martin Mokrejs @ 2012-04-26 22:08 UTC (permalink / raw)
To: Yinghai Lu; +Cc: Sarah Sharp, linux-pci, Linux Kernel Mailing List
[-- Attachment #1: Type: text/plain, Size: 5359 bytes --]
Yinghai Lu wrote:
> On Tue, Apr 24, 2012 at 1:48 PM, Martin Mokrejs
> <mmokrejs@fold.natur.cuni.cz> wrote:
>> (sorry for the re-send, now with the attached dmesg)
>>
>>
>> With the express card itself (no USB devices attached to it) I do not see
>> a difference. Is this what you wanted me to test?
>>
>
> so disabling autosuspend make no difference.
>
> Can you try boot the system without loading xhci driver ?
Bingo! Physical express card removal started to be notified correctly.
inserted
Apr 27 00:01:33 vostro kernel: [ 75.608352] pciehp 0000:00:1c.7:pcie04: lnk_status = 7011
Apr 27 00:01:33 vostro kernel: [ 75.608356] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
Apr 27 00:01:34 vostro kernel: [ 75.737878] pci 0000:11:00.0: BAR 0: assigned [mem 0xf6c00000-0xf6c01fff 64bit]
Apr 27 00:01:34 vostro kernel: [ 75.737923] pcieport 0000:00:1c.7: PCI bridge to [bus 11-16]
Apr 27 00:01:34 vostro kernel: [ 75.737927] pcieport 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
Apr 27 00:01:34 vostro kernel: [ 75.737932] pcieport 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff]
Apr 27 00:01:34 vostro kernel: [ 75.737936] pcieport 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
removed
Apr 27 00:01:40 vostro kernel: [ 81.925638] pciehp 0000:00:1c.7:pcie04: lnk_status = 5011
Apr 27 00:01:40 vostro kernel: [ 81.925643] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
inserted
Apr 27 00:01:44 vostro kernel: [ 86.061848] pciehp 0000:00:1c.7:pcie04: lnk_status = 7011
Apr 27 00:01:44 vostro kernel: [ 86.061852] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
Apr 27 00:01:44 vostro kernel: [ 86.182332] pci 0000:11:00.0: BAR 0: assigned [mem 0xf6c00000-0xf6c01fff 64bit]
Apr 27 00:01:44 vostro kernel: [ 86.182366] pcieport 0000:00:1c.7: PCI bridge to [bus 11-16]
Apr 27 00:01:44 vostro kernel: [ 86.182380] pcieport 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
Apr 27 00:01:44 vostro kernel: [ 86.182385] pcieport 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff]
Apr 27 00:01:44 vostro kernel: [ 86.182389] pcieport 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
removed
Apr 27 00:01:49 vostro kernel: [ 91.591185] pciehp 0000:00:1c.7:pcie04: lnk_status = 5011
Apr 27 00:01:49 vostro kernel: [ 91.591189] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
inserted
Apr 27 00:01:52 vostro kernel: [ 94.377955] pciehp 0000:00:1c.7:pcie04: lnk_status = 7011
Apr 27 00:01:52 vostro kernel: [ 94.377960] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
Apr 27 00:01:52 vostro kernel: [ 94.499944] pci 0000:11:00.0: BAR 0: assigned [mem 0xf6c00000-0xf6c01fff 64bit]
Apr 27 00:01:52 vostro kernel: [ 94.499980] pcieport 0000:00:1c.7: PCI bridge to [bus 11-16]
Apr 27 00:01:52 vostro kernel: [ 94.499996] pcieport 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
Apr 27 00:01:52 vostro kernel: [ 94.500001] pcieport 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff]
Apr 27 00:01:52 vostro kernel: [ 94.500005] pcieport 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
removed
Apr 27 00:01:56 vostro kernel: [ 98.005164] pciehp 0000:00:1c.7:pcie04: lnk_status = 5011
Apr 27 00:01:56 vostro kernel: [ 98.005168] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
inserted
Apr 27 00:01:58 vostro kernel: [ 100.394715] pciehp 0000:00:1c.7:pcie04: lnk_status = 7011
Apr 27 00:01:58 vostro kernel: [ 100.394718] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
Apr 27 00:01:58 vostro kernel: [ 100.520988] pci 0000:11:00.0: BAR 0: assigned [mem 0xf6c00000-0xf6c01fff 64bit]
Apr 27 00:01:58 vostro kernel: [ 100.521034] pcieport 0000:00:1c.7: PCI bridge to [bus 11-16]
Apr 27 00:01:58 vostro kernel: [ 100.521037] pcieport 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
Apr 27 00:01:58 vostro kernel: [ 100.521041] pcieport 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff]
Apr 27 00:01:58 vostro kernel: [ 100.521046] pcieport 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
removed
Apr 27 00:02:01 vostro kernel: [ 103.401375] pciehp 0000:00:1c.7:pcie04: lnk_status = 5011
Apr 27 00:02:01 vostro kernel: [ 103.401379] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
inserted
Apr 27 00:02:04 vostro kernel: [ 106.089626] pciehp 0000:00:1c.7:pcie04: lnk_status = 7011
Apr 27 00:02:04 vostro kernel: [ 106.089630] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
Apr 27 00:02:04 vostro kernel: [ 106.212517] pci 0000:11:00.0: BAR 0: assigned [mem 0xf6c00000-0xf6c01fff 64bit]
Apr 27 00:02:04 vostro kernel: [ 106.212561] pcieport 0000:00:1c.7: PCI bridge to [bus 11-16]
Apr 27 00:02:04 vostro kernel: [ 106.212564] pcieport 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
Apr 27 00:02:04 vostro kernel: [ 106.212569] pcieport 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff]
Apr 27 00:02:04 vostro kernel: [ 106.212574] pcieport 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
removed
Apr 27 00:02:07 vostro kernel: [ 108.854629] pciehp 0000:00:1c.7:pcie04: lnk_status = 5011
Apr 27 00:02:07 vostro kernel: [ 108.854633] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
Attached is dmesg and lspci of the express card bridge when the card is removed.
Martin
[-- Attachment #2: dmesg-3.4-rc3-patched_no_xhci_hcd --]
[-- Type: text/plain, Size: 71263 bytes --]
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.4.0-rc3-default (root@vostro) (gcc version 4.5.3 (Gentoo 4.5.3-r2 p1.1, pie-0.4.7) ) #9 SMP Thu Apr 26 23:58:21 MEST 2012
[ 0.000000] Command line: root=/dev/sda5 pciehp.pciehp_debug=1
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d400 (usable)
[ 0.000000] BIOS-e820: 000000000009d400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
[ 0.000000] BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
[ 0.000000] BIOS-e820: 0000000020200000 - 0000000040000000 (usable)
[ 0.000000] BIOS-e820: 0000000040000000 - 0000000040200000 (reserved)
[ 0.000000] BIOS-e820: 0000000040200000 - 00000000da4e5000 (usable)
[ 0.000000] BIOS-e820: 00000000da4e5000 - 00000000da528000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000da528000 - 00000000da793000 (usable)
[ 0.000000] BIOS-e820: 00000000da793000 - 00000000da967000 (reserved)
[ 0.000000] BIOS-e820: 00000000da967000 - 00000000daa89000 (usable)
[ 0.000000] BIOS-e820: 00000000daa89000 - 00000000dad68000 (reserved)
[ 0.000000] BIOS-e820: 00000000dad68000 - 00000000dafe8000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000dafe8000 - 00000000db000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000db800000 - 00000000dfa00000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed04000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000041fe00000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.6 present.
[ 0.000000] DMI: Dell Inc. Vostro 3550/0JGC48, BIOS A09 09/30/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x41fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask C00000000 write-back
[ 0.000000] 1 base 400000000 mask FE0000000 write-back
[ 0.000000] 2 base 0DB800000 mask FFF800000 uncachable
[ 0.000000] 3 base 0DC000000 mask FFC000000 uncachable
[ 0.000000] 4 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 5 base 41FE00000 mask FFFE00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000db800000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xdaa89 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000daa89000
[ 0.000000] 0000000000 - 00daa00000 page 2M
[ 0.000000] 00daa00000 - 00daa89000 page 4k
[ 0.000000] kernel direct mapping tables up to daa89000 @ 1fffa000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-000000041fe00000
[ 0.000000] 0100000000 - 041fe00000 page 2M
[ 0.000000] kernel direct mapping tables up to 41fe00000 @ daa77000-daa89000
[ 0.000000] ACPI: RSDP 00000000000f0410 00024 (v02 DELL)
[ 0.000000] ACPI: XSDT 00000000dafe8078 00074 (v01 DELL WN09 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 00000000daff1d08 000F4 (v04 DELL WN09 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 00000000dafe8180 09B85 (v02 DELL WN09 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000dafe3f80 00040
[ 0.000000] ACPI: APIC 00000000daff1e00 00072 (v03 DELL WN09 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 00000000daff1e78 0003C (v01 DELL WN09 01072009 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000daff1eb8 004B0 (v01 TrmRef PtidDevc 00001000 INTL 20091112)
[ 0.000000] ACPI: SLIC 00000000daff2368 00176 (v01 DELL WN09 01072009 AMI 00010013)
[ 0.000000] ACPI: HPET 00000000daff24e0 00038 (v01 DELL WN09 01072009 AMI. 00000004)
[ 0.000000] ACPI: SSDT 00000000daff2518 00846 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 00000000daff2d60 00996 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: DMAR 00000000daff36f8 000E8 (v01 INTEL SNB 00000001 INTL 00000001)
[ 0.000000] ACPI: OSFR 00000000daff37e0 00086 (v01 DELL M08 07DB091E ASL 00000061)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000041fe00000
[ 0.000000] Initmem setup node 0 0000000000000000-000000041fe00000
[ 0.000000] NODE_DATA [000000041fdfc000 - 000000041fdfffff]
[ 0.000000] [ffffea0000000000-ffffea000e7fffff] PMD -> [ffff88040f400000-ffff88041d5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0041fe00
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x00020000
[ 0.000000] 0: 0x00020200 -> 0x00040000
[ 0.000000] 0: 0x00040200 -> 0x000da4e5
[ 0.000000] 0: 0x000da528 -> 0x000da793
[ 0.000000] 0: 0x000da967 -> 0x000daa89
[ 0.000000] 0: 0x00100000 -> 0x0041fe00
[ 0.000000] On node 0 totalpages: 4170239
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3920 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 875690 pages, LIFO batch:31
[ 0.000000] Normal zone: 44793 pages used for memmap
[ 0.000000] Normal zone: 3231495 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[ 0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000
[ 0.000000] PM: Registered nosave memory: 00000000da4e5000 - 00000000da528000
[ 0.000000] PM: Registered nosave memory: 00000000da793000 - 00000000da967000
[ 0.000000] PM: Registered nosave memory: 00000000daa89000 - 00000000dad68000
[ 0.000000] PM: Registered nosave memory: 00000000dad68000 - 00000000dafe8000
[ 0.000000] PM: Registered nosave memory: 00000000dafe8000 - 00000000db000000
[ 0.000000] PM: Registered nosave memory: 00000000db000000 - 00000000db800000
[ 0.000000] PM: Registered nosave memory: 00000000db800000 - 00000000dfa00000
[ 0.000000] PM: Registered nosave memory: 00000000dfa00000 - 00000000f8000000
[ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000
[ 0.000000] PM: Registered nosave memory: 00000000fed04000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at dfa00000 (gap: dfa00000:18600000)
[ 0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 25 pages/cpu @ffff88041fa00000 s72448 r8192 d21760 u524288
[ 0.000000] pcpu-alloc: s72448 r8192 d21760 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4111105
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/sda5 pciehp.pciehp_debug=1
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 16372188k/17299456k available (5672k kernel code, 618500k absent, 308768k reserved, 3598k data, 544k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:4352 nr_irqs:712 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.010000] Detected 2793.636 MHz processor.
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5587.27 BogoMIPS (lpj=27936360)
[ 0.000193] pid_max: default: 32768 minimum: 301
[ 0.001164] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.004172] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.005539] Mount-cache hash table entries: 256
[ 0.005803] CPU: Physical Processor ID: 0
[ 0.005895] CPU: Processor Core ID: 0
[ 0.005990] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.005991] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.006182] mce: CPU supports 7 MCE banks
[ 0.006284] CPU0: Thermal monitoring enabled (TM1)
[ 0.006380] using mwait in idle threads.
[ 0.006529] ACPI: Core revision 20120320
[ 0.029087] DMAR: Host address width 36
[ 0.029180] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.029280] IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ 0.029424] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.029522] IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.029667] DMAR: RMRR base: 0x000000dad53000 end: 0x000000dad61fff
[ 0.029763] DMAR: RMRR base: 0x000000db800000 end: 0x000000df9fffff
[ 0.029930] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.030024] HPET id 0 under DRHD base 0xfed91000
[ 0.030118] HPET id 0 under DRHD base 0xfed91000
[ 0.030211] HPET id 0 under DRHD base 0xfed91000
[ 0.030304] HPET id 0 under DRHD base 0xfed91000
[ 0.030398] HPET id 0 under DRHD base 0xfed91000
[ 0.030491] HPET id 0 under DRHD base 0xfed91000
[ 0.030583] HPET id 0 under DRHD base 0xfed91000
[ 0.030677] HPET id 0 under DRHD base 0xfed91000
[ 0.030929] Enabled IRQ remapping in x2apic mode
[ 0.031022] Enabling x2apic
[ 0.031112] Enabled x2apic
[ 0.031205] Switched APIC routing to cluster x2apic.
[ 0.031738] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.131689] CPU0: Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz stepping 07
[ 0.246466] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
[ 0.246769] PEBS disabled due to CPU errata.
[ 0.246863] ... version: 3
[ 0.246955] ... bit width: 48
[ 0.247047] ... generic registers: 4
[ 0.247140] ... value mask: 0000ffffffffffff
[ 0.247235] ... max period: 000000007fffffff
[ 0.247329] ... fixed-purpose events: 3
[ 0.247422] ... event mask: 000000070000000f
[ 0.247603] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.247772] Booting Node 0, Processors #1
[ 0.260974] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.262552] #2
[ 0.275709] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.275970] #3 Ok.
[ 0.289169] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.289288] Brought up 4 CPUs
[ 0.289380] Total of 4 processors activated (22349.08 BogoMIPS).
[ 0.292417] devtmpfs: initialized
[ 0.292666] PM: Registering ACPI NVS region [mem 0xda4e5000-0xda527fff] (274432 bytes)
[ 0.292821] PM: Registering ACPI NVS region [mem 0xdad68000-0xdafe7fff] (2621440 bytes)
[ 0.293089] xor: automatically using best checksumming function: generic_sse
[ 0.336331] generic_sse: 12452.800 MB/sec
[ 0.336424] xor: using function: generic_sse (12452.800 MB/sec)
[ 0.336651] dummy:
[ 0.336810] NET: Registered protocol family 16
[ 0.337201] ACPI: bus type pci registered
[ 0.337388] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.337537] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.344684] PCI: Using configuration type 1 for base access
[ 0.350767] bio: create slab <bio-0> at 0
[ 0.516068] raid6: int64x1 2919 MB/s
[ 0.685825] raid6: int64x2 3002 MB/s
[ 0.855567] raid6: int64x4 2721 MB/s
[ 1.025325] raid6: int64x8 1730 MB/s
[ 1.195048] raid6: sse2x1 7520 MB/s
[ 1.364796] raid6: sse2x2 9256 MB/s
[ 1.534545] raid6: sse2x4 10548 MB/s
[ 1.534637] raid6: using algorithm sse2x4 (10548 MB/s)
[ 1.534771] ACPI: Added _OSI(Module Device)
[ 1.534867] ACPI: Added _OSI(Processor Device)
[ 1.534963] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 1.535059] ACPI: Added _OSI(Processor Aggregator Device)
[ 1.536370] ACPI: EC: Look up EC in DSDT
[ 1.537684] ACPI: Executed 1 blocks of module-level executable AML code
[ 1.542701] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 1.547198] ACPI: SSDT 00000000dad51698 0064F (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 1.547739] ACPI: Dynamic OEM Table Load:
[ 1.547905] ACPI: SSDT (null) 0064F (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 1.548485] ACPI: SSDT 00000000dad52a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 1.549065] ACPI: Dynamic OEM Table Load:
[ 1.549236] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 1.549585] ACPI: SSDT 00000000dad50d98 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 1.550113] ACPI: Dynamic OEM Table Load:
[ 1.550283] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 1.551069] ACPI: Interpreter enabled
[ 1.551163] ACPI: (supports S0 S1 S3 S4 S5)
[ 1.551472] ACPI: Using IOAPIC for interrupt routing
[ 1.576825] ACPI: No dock devices found.
[ 1.576922] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 1.577399] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 1.577933] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 1.578030] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 1.578127] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 1.578269] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[ 1.578413] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 1.578558] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 1.578704] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
[ 1.578848] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
[ 1.578996] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
[ 1.579139] pci_root PNP0A08:00: host bridge window [mem 0xdfa00000-0xfeafffff]
[ 1.579283] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
[ 1.579474] PCI host bridge to bus 0000:00
[ 1.579568] pci_bus 0000:00: busn_res: [bus 00-3e] for root bus
[ 1.579570] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 1.579665] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 1.579761] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 1.579858] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 1.579956] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 1.580053] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 1.580149] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 1.580245] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 1.580341] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 1.580439] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 1.580536] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff]
[ 1.580633] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[ 1.580737] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[ 1.580771] pci 0000:00:02.0: [8086:0126] type 00 class 0x030000
[ 1.580780] pci 0000:00:02.0: reg 10: [mem 0xf6800000-0xf6bfffff 64bit]
[ 1.580786] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 1.580790] pci 0000:00:02.0: reg 20: [io 0xf000-0xf03f]
[ 1.580840] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 1.580863] pci 0000:00:16.0: reg 10: [mem 0xf7f0a000-0xf7f0a00f 64bit]
[ 1.580938] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 1.580971] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 1.580992] pci 0000:00:1a.0: reg 10: [mem 0xf7f08000-0xf7f083ff]
[ 1.581079] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 1.581106] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 1.581121] pci 0000:00:1b.0: reg 10: [mem 0xf7f00000-0xf7f03fff 64bit]
[ 1.581187] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.581212] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 1.581290] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.581316] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[ 1.581393] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 1.581420] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[ 1.581497] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 1.581527] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[ 1.581658] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 1.581699] pci 0000:00:1c.7: [8086:1c1e] type 01 class 0x060400
[ 1.581829] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[ 1.581869] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 1.581889] pci 0000:00:1d.0: reg 10: [mem 0xf7f07000-0xf7f073ff]
[ 1.581977] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 1.582004] pci 0000:00:1f.0: [8086:1c4b] type 00 class 0x060100
[ 1.582127] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[ 1.582144] pci 0000:00:1f.2: reg 10: [io 0xf0b0-0xf0b7]
[ 1.582152] pci 0000:00:1f.2: reg 14: [io 0xf0a0-0xf0a3]
[ 1.582160] pci 0000:00:1f.2: reg 18: [io 0xf090-0xf097]
[ 1.582168] pci 0000:00:1f.2: reg 1c: [io 0xf080-0xf083]
[ 1.582176] pci 0000:00:1f.2: reg 20: [io 0xf060-0xf07f]
[ 1.582183] pci 0000:00:1f.2: reg 24: [mem 0xf7f06000-0xf7f067ff]
[ 1.582227] pci 0000:00:1f.2: PME# supported from D3hot
[ 1.582246] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 1.582261] pci 0000:00:1f.3: reg 10: [mem 0xf7f05000-0xf7f050ff 64bit]
[ 1.582281] pci 0000:00:1f.3: reg 20: [io 0xf040-0xf05f]
[ 1.582311] pci 0000:00:1c.0: check if busn 03-04 is in busn_res: [bus 00-3e]
[ 1.582357] pci_bus 0000:03: busn_res: [bus 03-04] is inserted under [bus 00-3e]
[ 1.582361] pci 0000:00:1c.0: PCI bridge to [bus 03-04]
[ 1.582466] pci 0000:00:1c.1: check if busn 05-06 is in busn_res: [bus 00-3e]
[ 1.582511] pci_bus 0000:05: busn_res: [bus 05-06] is inserted under [bus 00-3e]
[ 1.582537] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
[ 1.582556] pci 0000:05:00.0: reg 10: [io 0xe000-0xe0ff]
[ 1.582590] pci 0000:05:00.0: reg 18: [mem 0xf1104000-0xf1104fff 64bit pref]
[ 1.582612] pci 0000:05:00.0: reg 20: [mem 0xf1100000-0xf1103fff 64bit pref]
[ 1.582703] pci 0000:05:00.0: supports D1 D2
[ 1.582705] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.598995] pci 0000:00:1c.1: PCI bridge to [bus 05-06]
[ 1.599134] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
[ 1.599143] pci 0000:00:1c.1: bridge window [mem 0xf1100000-0xf11fffff 64bit pref]
[ 1.599147] pci 0000:00:1c.3: check if busn 09-0a is in busn_res: [bus 00-3e]
[ 1.599191] pci_bus 0000:09: busn_res: [bus 09-0a] is inserted under [bus 00-3e]
[ 1.599354] pci 0000:09:00.0: [8086:008a] type 00 class 0x028000
[ 1.599487] pci 0000:09:00.0: reg 10: [mem 0xf7e00000-0xf7e01fff 64bit]
[ 1.600185] pci 0000:09:00.0: PME# supported from D0 D3hot D3cold
[ 1.619078] pci 0000:00:1c.3: PCI bridge to [bus 09-0a]
[ 1.619177] pci 0000:00:1c.3: bridge window [mem 0xf7e00000-0xf7efffff]
[ 1.619187] pci 0000:00:1c.4: check if busn 0b-0c is in busn_res: [bus 00-3e]
[ 1.619256] pci_bus 0000:0b: busn_res: [bus 0b-0c] is inserted under [bus 00-3e]
[ 1.619283] pci 0000:0b:00.0: [104c:8241] type 00 class 0x0c0330
[ 1.619308] pci 0000:0b:00.0: reg 10: [mem 0xf7d00000-0xf7d0ffff 64bit]
[ 1.619328] pci 0000:0b:00.0: reg 18: [mem 0xf7d10000-0xf7d11fff 64bit]
[ 1.619433] pci 0000:0b:00.0: supports D1 D2
[ 1.619434] pci 0000:0b:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.638932] pci 0000:00:1c.4: PCI bridge to [bus 0b-0c]
[ 1.639077] pci 0000:00:1c.4: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 1.639090] pci 0000:00:1c.7: check if busn 11-16 is in busn_res: [bus 00-3e]
[ 1.639157] pci_bus 0000:11: busn_res: [bus 11-16] is inserted under [bus 00-3e]
[ 1.639160] pci 0000:00:1c.7: PCI bridge to [bus 11-16]
[ 1.639255] pci 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
[ 1.639260] pci 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff]
[ 1.639269] pci 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
[ 1.639321] pci 0000:00:1c.0: PCI bridge to [bus 03-04]
[ 1.639431] pci 0000:00:1c.1: PCI bridge to [bus 05-06]
[ 1.639528] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
[ 1.639536] pci 0000:00:1c.1: bridge window [mem 0xf1100000-0xf11fffff 64bit pref]
[ 1.639567] pci 0000:00:1c.3: PCI bridge to [bus 09-0a]
[ 1.639666] pci 0000:00:1c.3: bridge window [mem 0xf7e00000-0xf7efffff]
[ 1.639683] pci 0000:00:1c.4: PCI bridge to [bus 0b-0c]
[ 1.639785] pci 0000:00:1c.4: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 1.639802] pci 0000:00:1c.7: PCI bridge to [bus 11-16]
[ 1.639901] pci 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
[ 1.639906] pci 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff]
[ 1.639915] pci 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
[ 1.639920] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.640090] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 1.640127] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 1.640166] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 1.640203] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[ 1.640255] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP08._PRT]
[ 1.640385] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 1.640690] pci0000:00: ACPI _OSC control (0x19) granted
[ 1.645377] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 1.645944] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 1.646506] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
[ 1.647068] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 1.647632] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.648323] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.649015] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 1.649577] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 1.650135] acpi root: \_SB_.PCI0 notify handler installed
[ 1.650185] Found 1 acpi root devices
[ 1.650268] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.650417] vgaarb: loaded
[ 1.650508] vgaarb: bridge control possible 0000:00:02.0
[ 1.650742] SCSI subsystem initialized
[ 1.650902] libata version 3.00 loaded.
[ 1.651005] usbcore: registered new interface driver usbfs
[ 1.651124] usbcore: registered new interface driver hub
[ 1.651246] usbcore: registered new device driver usb
[ 1.651399] Linux media interface: v0.10
[ 1.651511] Linux video capture interface: v2.00
[ 1.651964] wmi: Mapper loaded
[ 1.652099] Advanced Linux Sound Architecture Driver Version 1.0.25.
[ 1.652195] PCI: Using ACPI for IRQ routing
[ 1.654233] PCI: pci_cache_line_size set to 64 bytes
[ 1.654340] reserve RAM buffer: 000000000009d400 - 000000000009ffff
[ 1.654342] reserve RAM buffer: 00000000da4e5000 - 00000000dbffffff
[ 1.654345] reserve RAM buffer: 00000000da793000 - 00000000dbffffff
[ 1.654348] reserve RAM buffer: 00000000daa89000 - 00000000dbffffff
[ 1.654350] reserve RAM buffer: 000000041fe00000 - 000000041fffffff
[ 1.654491] Bluetooth: Core ver 2.16
[ 1.654604] NET: Registered protocol family 31
[ 1.654697] Bluetooth: HCI device and connection manager initialized
[ 1.654794] Bluetooth: HCI socket layer initialized
[ 1.654889] Bluetooth: L2CAP socket layer initialized
[ 1.654982] Bluetooth: SCO socket layer initialized
[ 1.655140] cfg80211: Calling CRDA to update world regulatory domain
[ 1.655344] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 1.655790] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 1.657895] Switching to clocksource hpet
[ 1.658065] pnp: PnP ACPI init
[ 1.658163] ACPI: bus type pnp registered
[ 1.658498] pnp 00:00: [bus 00-3e]
[ 1.658500] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 1.658502] pnp 00:00: [io 0x0cf8-0x0cff]
[ 1.658504] pnp 00:00: [io 0x0d00-0xffff window]
[ 1.658505] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 1.658507] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 1.658509] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 1.658510] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 1.658512] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 1.658513] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 1.658515] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 1.658516] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 1.658518] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 1.658519] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 1.658521] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 1.658522] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 1.658524] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 1.658525] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 1.658527] pnp 00:00: [mem 0xdfa00000-0xfeafffff window]
[ 1.658529] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 1.658597] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 1.658609] pnp 00:01: [io 0x0000-0x001f]
[ 1.658610] pnp 00:01: [io 0x0081-0x0091]
[ 1.658612] pnp 00:01: [io 0x0093-0x009f]
[ 1.658613] pnp 00:01: [io 0x00c0-0x00df]
[ 1.658615] pnp 00:01: [dma 4]
[ 1.658654] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 1.658662] pnp 00:02: [mem 0xff000000-0xffffffff]
[ 1.658701] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 1.658774] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 1.658816] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 1.658827] pnp 00:04: [io 0x002e-0x002f]
[ 1.658829] pnp 00:04: [io 0x004e-0x004f]
[ 1.658830] pnp 00:04: [io 0x0061]
[ 1.658831] pnp 00:04: [io 0x0063]
[ 1.658833] pnp 00:04: [io 0x0065]
[ 1.658834] pnp 00:04: [io 0x0067]
[ 1.658835] pnp 00:04: [io 0x0070]
[ 1.658836] pnp 00:04: [io 0x0080]
[ 1.658837] pnp 00:04: [io 0x0092]
[ 1.658839] pnp 00:04: [io 0x00b2-0x00b3]
[ 1.658840] pnp 00:04: [io 0x0680-0x069f]
[ 1.658841] pnp 00:04: [io 0x1000-0x100f]
[ 1.658843] pnp 00:04: [io 0xffff]
[ 1.658844] pnp 00:04: [io 0xffff]
[ 1.658845] pnp 00:04: [io 0x0400-0x0453]
[ 1.658846] pnp 00:04: [io 0x0458-0x047f]
[ 1.658848] pnp 00:04: [io 0x0500-0x057f]
[ 1.658849] pnp 00:04: [io 0x164e-0x164f]
[ 1.658904] system 00:04: [io 0x0680-0x069f] has been reserved
[ 1.659000] system 00:04: [io 0x1000-0x100f] has been reserved
[ 1.659095] system 00:04: [io 0xffff] has been reserved
[ 1.659189] system 00:04: [io 0xffff] has been reserved
[ 1.659283] system 00:04: [io 0x0400-0x0453] has been reserved
[ 1.659378] system 00:04: [io 0x0458-0x047f] has been reserved
[ 1.659472] system 00:04: [io 0x0500-0x057f] has been reserved
[ 1.659568] system 00:04: [io 0x164e-0x164f] has been reserved
[ 1.659664] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.659672] pnp 00:05: [io 0x0070-0x0077]
[ 1.659682] pnp 00:05: [irq 8]
[ 1.659723] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.659750] pnp 00:06: [io 0x0454-0x0457]
[ 1.659801] system 00:06: [io 0x0454-0x0457] has been reserved
[ 1.659898] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 1.659906] pnp 00:07: [io 0x00f0-0x00ff]
[ 1.659912] pnp 00:07: [irq 13]
[ 1.659954] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 1.659970] pnp 00:08: [io 0x0010-0x001f]
[ 1.659971] pnp 00:08: [io 0x0022-0x003f]
[ 1.659973] pnp 00:08: [io 0x0044-0x005f]
[ 1.659974] pnp 00:08: [io 0x0068-0x006f]
[ 1.659975] pnp 00:08: [io 0x0072-0x007f]
[ 1.659976] pnp 00:08: [io 0x0080]
[ 1.659978] pnp 00:08: [io 0x0084-0x0086]
[ 1.659979] pnp 00:08: [io 0x0088]
[ 1.659981] pnp 00:08: [io 0x008c-0x008e]
[ 1.659982] pnp 00:08: [io 0x0090-0x009f]
[ 1.659983] pnp 00:08: [io 0x00a2-0x00bf]
[ 1.659985] pnp 00:08: [io 0x00e0-0x00ef]
[ 1.659986] pnp 00:08: [io 0x04d0-0x04d1]
[ 1.659987] pnp 00:08: [mem 0xfe800000-0xfe802fff]
[ 1.660043] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 1.660140] system 00:08: [mem 0xfe800000-0xfe802fff] has been reserved
[ 1.660237] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.660254] pnp 00:09: [irq 12]
[ 1.660297] pnp 00:09: Plug and Play ACPI device, IDs DLL04b3 SYN0600 SYN0002 PNP0f13 (active)
[ 1.660311] pnp 00:0a: [io 0x0060]
[ 1.660312] pnp 00:0a: [io 0x0064]
[ 1.660313] pnp 00:0a: [io 0x0062]
[ 1.660314] pnp 00:0a: [io 0x0066]
[ 1.660320] pnp 00:0a: [irq 1]
[ 1.660362] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active)
[ 1.660554] pnp 00:0b: [mem 0xfed1c000-0xfed1ffff]
[ 1.660556] pnp 00:0b: [mem 0xfed10000-0xfed17fff]
[ 1.660557] pnp 00:0b: [mem 0xfed18000-0xfed18fff]
[ 1.660559] pnp 00:0b: [mem 0xfed19000-0xfed19fff]
[ 1.660560] pnp 00:0b: [mem 0xf8000000-0xfbffffff]
[ 1.660561] pnp 00:0b: [mem 0xfed20000-0xfed3ffff]
[ 1.660563] pnp 00:0b: [mem 0xfed90000-0xfed93fff]
[ 1.660564] pnp 00:0b: [mem 0xfed45000-0xfed8ffff]
[ 1.660566] pnp 00:0b: [mem 0xff000000-0xffffffff]
[ 1.660567] pnp 00:0b: [mem 0xfee00000-0xfeefffff]
[ 1.660568] pnp 00:0b: [mem 0xdfa00000-0xdfa00fff]
[ 1.660635] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.660733] system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved
[ 1.660829] system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved
[ 1.660926] system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved
[ 1.661021] system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved
[ 1.661119] system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.661216] system 00:0b: [mem 0xfed90000-0xfed93fff] has been reserved
[ 1.661313] system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 1.661410] system 00:0b: [mem 0xff000000-0xffffffff] has been reserved
[ 1.661507] system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 1.661603] system 00:0b: [mem 0xdfa00000-0xdfa00fff] has been reserved
[ 1.661700] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.661759] pnp 00:0c: [irq 20]
[ 1.661817] pnp 00:0c: Plug and Play ACPI device, IDs SMO8800 (active)
[ 1.661928] pnp 00:0d: [mem 0x20000000-0x201fffff]
[ 1.661929] pnp 00:0d: [mem 0x40000000-0x401fffff]
[ 1.661999] system 00:0d: [mem 0x20000000-0x201fffff] has been reserved
[ 1.662095] system 00:0d: [mem 0x40000000-0x401fffff] has been reserved
[ 1.662192] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 1.662235] pnp: PnP ACPI: found 14 devices
[ 1.662327] ACPI: ACPI bus type pnp unregistered
[ 1.670361] pci 0000:00:1c.0: PCI bridge to [bus 03-04]
[ 1.670467] pci 0000:00:1c.1: PCI bridge to [bus 05-06]
[ 1.670563] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
[ 1.670664] pci 0000:00:1c.1: bridge window [mem 0xf1100000-0xf11fffff 64bit pref]
[ 1.670814] pci 0000:00:1c.3: PCI bridge to [bus 09-0a]
[ 1.670912] pci 0000:00:1c.3: bridge window [mem 0xf7e00000-0xf7efffff]
[ 1.671012] pci 0000:00:1c.4: PCI bridge to [bus 0b-0c]
[ 1.671111] pci 0000:00:1c.4: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 1.671218] pci 0000:00:1c.7: PCI bridge to [bus 11-16]
[ 1.671314] pci 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
[ 1.671415] pci 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff]
[ 1.671514] pci 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
[ 1.671705] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.671706] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.671708] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.671710] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 1.671711] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 1.671713] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 1.671714] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[ 1.671716] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
[ 1.671717] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
[ 1.671719] pci_bus 0000:00: resource 13 [mem 0xdfa00000-0xfeafffff]
[ 1.671721] pci_bus 0000:00: resource 14 [mem 0xfed40000-0xfed44fff]
[ 1.671722] pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
[ 1.671724] pci_bus 0000:05: resource 2 [mem 0xf1100000-0xf11fffff 64bit pref]
[ 1.671726] pci_bus 0000:09: resource 1 [mem 0xf7e00000-0xf7efffff]
[ 1.671727] pci_bus 0000:0b: resource 1 [mem 0xf7d00000-0xf7dfffff]
[ 1.671729] pci_bus 0000:11: resource 0 [io 0xc000-0xdfff]
[ 1.671730] pci_bus 0000:11: resource 1 [mem 0xf6c00000-0xf7cfffff]
[ 1.671732] pci_bus 0000:11: resource 2 [mem 0xf0000000-0xf10fffff 64bit pref]
[ 1.671802] NET: Registered protocol family 2
[ 1.673478] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 1.674456] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.675678] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.675900] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.675996] TCP: reno registered
[ 1.676104] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 1.676251] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 1.676454] NET: Registered protocol family 1
[ 1.676557] pci 0000:00:02.0: Boot video device
[ 1.917796] PCI: CLS 64 bytes, default 64
[ 1.917854] DMAR: No ATSR found
[ 1.917970] IOMMU 0 0xfed90000: using Queued invalidation
[ 1.918065] IOMMU 1 0xfed91000: using Queued invalidation
[ 1.918160] IOMMU: Setting RMRR:
[ 1.918261] IOMMU: Setting identity map for device 0000:00:02.0 [0xdb800000 - 0xdf9fffff]
[ 1.918758] IOMMU: Setting identity map for device 0000:00:1d.0 [0xdad53000 - 0xdad61fff]
[ 1.918922] IOMMU: Setting identity map for device 0000:00:1a.0 [0xdad53000 - 0xdad61fff]
[ 1.919076] IOMMU: Prepare 0-16MiB unity mapping for LPC
[ 1.919177] IOMMU: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff]
[ 1.919611] PCI-DMA: Intel(R) Virtualization Technology for Directed I/O
[ 1.922407] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x1b
[ 1.922512] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x1b
[ 1.922612] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x1b
[ 1.922713] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x1b
[ 1.922857] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.923903] sha1_ssse3: Using AVX optimized SHA-1 implementation
[ 1.925147] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.927032] DLM installed
[ 1.927256] msgmni has been set to 32105
[ 1.928536] NET: Registered protocol family 38
[ 1.928632] async_tx: api initialized (async)
[ 1.928768] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.928912] io scheduler noop registered
[ 1.929005] io scheduler deadline registered
[ 1.929115] io scheduler cfq registered (default)
[ 1.929551] pcieport 0000:00:1c.7: irq 42 for MSI/MSI-X
[ 1.929768] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.929950] pciehp 0000:00:1c.7:pcie04: Hotplug Controller:
[ 1.930046] pciehp 0000:00:1c.7:pcie04: Seg/Bus/Dev/Func/IRQ : 0000:00:1c.7 IRQ 42
[ 1.930192] pciehp 0000:00:1c.7:pcie04: Vendor ID : 0x8086
[ 1.930289] pciehp 0000:00:1c.7:pcie04: Device ID : 0x1c1e
[ 1.930386] pciehp 0000:00:1c.7:pcie04: Subsystem ID : 0x04b3
[ 1.930482] pciehp 0000:00:1c.7:pcie04: Subsystem Vendor ID : 0x1028
[ 1.930579] pciehp 0000:00:1c.7:pcie04: PCIe Cap offset : 0x40
[ 1.930676] pciehp 0000:00:1c.7:pcie04: PCI resource [13] : [io 0xc000-0xdfff]
[ 1.930823] pciehp 0000:00:1c.7:pcie04: PCI resource [14] : [mem 0xf6c00000-0xf7cfffff]
[ 1.930970] pciehp 0000:00:1c.7:pcie04: PCI resource [15] : [mem 0xf0000000-0xf10fffff 64bit pref]
[ 1.931118] pciehp 0000:00:1c.7:pcie04: Slot Capabilities : 0x003cb260
[ 1.931215] pciehp 0000:00:1c.7:pcie04: Physical Slot Number : 7
[ 1.931312] pciehp 0000:00:1c.7:pcie04: Attention Button : no
[ 1.931408] pciehp 0000:00:1c.7:pcie04: Power Controller : no
[ 1.931503] pciehp 0000:00:1c.7:pcie04: MRL Sensor : no
[ 1.931599] pciehp 0000:00:1c.7:pcie04: Attention Indicator : no
[ 1.931696] pciehp 0000:00:1c.7:pcie04: Power Indicator : no
[ 1.931792] pciehp 0000:00:1c.7:pcie04: Hot-Plug Surprise : yes
[ 1.931889] pciehp 0000:00:1c.7:pcie04: EMI Present : no
[ 1.931986] pciehp 0000:00:1c.7:pcie04: Command Completed : no
[ 1.932083] pciehp 0000:00:1c.7:pcie04: Slot Status : 0x0000
[ 1.932182] pciehp 0000:00:1c.7:pcie04: Slot Control : 0x0000
[ 1.932280] pciehp 0000:00:1c.7:pcie04: Link Active Reporting supported
[ 1.932289] pciehp 0000:00:1c.7:pcie04: HPC vendor_id 8086 device_id 1c1e ss_vid 1028 ss_did 4b3
[ 1.932438] pciehp 0000:00:1c.7:pcie04: Registering domain:bus:dev=0000:11:00 sun=7
[ 1.932487] pciehp 0000:00:1c.7:pcie04: pciehp_get_power_status: SLOTCTRL 58 value read 1028
[ 1.932489] pciehp 0000:00:1c.7:pcie04: service driver pciehp loaded
[ 1.932515] pciehp: pcie_port_service_register = 0
[ 1.932516] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.932613] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 1.933048] intel_idle: MWAIT substates: 0x21120
[ 1.933049] intel_idle: v0.4 model 0x2A
[ 1.933050] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.933158] ACPI: AC Adapter [AC] (on-line)
[ 1.933365] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 1.934794] ACPI: Lid Switch [LID0]
[ 1.934947] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 1.935095] ACPI: Power Button [PWRB]
[ 1.935245] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 1.935392] ACPI: Sleep Button [SBTN]
[ 1.935536] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.935682] ACPI: Power Button [PWRF]
[ 1.936035] ACPI: Requesting acpi_cpufreq
[ 1.946316] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.946412] ACPI: Thermal Zone [THM] (67 C)
[ 1.946607] GHES: HEST is not enabled!
[ 1.967352] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.968625] Non-volatile memory driver v1.3
[ 1.969042] i8k: unable to get SMM BIOS version
[ 1.971933] Dell laptop SMM driver v1.14 21/02/2005 Massimo Dal Zotto (dz@debian.org)
[ 1.972136] Linux agpgart interface v0.103
[ 1.972276] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
[ 1.972451] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 1.973640] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[ 1.973876] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 1.974041] ipmi message handler version 39.2
[ 1.974141] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
[ 1.974289] Hangcheck: Using getrawmonotonic().
[ 1.974416] [drm] Initialized drm 1.1.0 20060810
[ 1.974745] i915 0000:00:02.0: setting latency timer to 64
[ 1.987883] ACPI: Battery Slot [BAT0] (battery present)
[ 2.010985] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
[ 2.011132] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 2.011586] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[ 2.011593] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 2.011691] [drm] Driver supports precise vblank timestamp query.
[ 2.011814] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.109343] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 2.663702] fbcon: inteldrmfb (fb0) is primary device
[ 2.916214] Refined TSC clocksource calibration: 2793.656 MHz.
[ 2.916222] Switching to clocksource tsc
[ 3.164999] Console: switching to colour frame buffer device 170x48
[ 3.167776] fb0: inteldrmfb frame buffer device
[ 3.167777] drm: registered panic notifier
[ 3.169016] acpi device:34: registered as cooling_device4
[ 3.169249] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4
[ 3.169293] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 3.169356] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 3.170196] loop: module loaded
[ 3.170331] ahci 0000:00:1f.2: version 3.0
[ 3.170378] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
[ 3.170403] ahci: SSS flag set, parallel bus scan disabled
[ 3.185767] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x31 impl SATA mode
[ 3.185877] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
[ 3.185919] ahci 0000:00:1f.2: setting latency timer to 64
[ 3.226465] scsi0 : ahci
[ 3.226587] scsi1 : ahci
[ 3.226678] scsi2 : ahci
[ 3.226769] scsi3 : ahci
[ 3.226857] scsi4 : ahci
[ 3.226953] scsi5 : ahci
[ 3.228217] ata1: SATA max UDMA/133 abar m2048@0xf7f06000 port 0xf7f06100 irq 44
[ 3.229189] ata2: DUMMY
[ 3.230149] ata3: DUMMY
[ 3.231102] ata4: DUMMY
[ 3.232035] ata5: SATA max UDMA/133 abar m2048@0xf7f06000 port 0xf7f06300 irq 44
[ 3.232984] ata6: SATA max UDMA/133 abar m2048@0xf7f06000 port 0xf7f06380 irq 44
[ 3.234052] tun: Universal TUN/TAP device driver, 1.6
[ 3.234995] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 3.236006] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 3.237066] r8169 0000:05:00.0: irq 45 for MSI/MSI-X
[ 3.237221] r8169 0000:05:00.0: eth0: RTL8168e/8111e at 0xffffc900065d2000, 18:03:73:a0:6f:6a, XID 0c200000 IRQ 45
[ 3.238191] r8169 0000:05:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 3.239176] VMware vmxnet3 virtual NIC driver - version 1.1.29.0-k-NAPI
[ 3.240174] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.241144] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 3.241147] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 3.242082] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 3.243053] ehci_hcd 0000:00:1a.0: debug port 2
[ 3.247850] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 3.247862] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7f08000
[ 3.265624] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 3.266640] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.267566] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.268494] usb usb1: Product: EHCI Host Controller
[ 3.269406] usb usb1: Manufacturer: Linux 3.4.0-rc3-default ehci_hcd
[ 3.270339] usb usb1: SerialNumber: 0000:00:1a.0
[ 3.271397] hub 1-0:1.0: USB hub found
[ 3.272333] hub 1-0:1.0: 2 ports detected
[ 3.273319] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3.273322] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 3.274248] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 3.275197] ehci_hcd 0000:00:1d.0: debug port 2
[ 3.279997] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 3.280009] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7f07000
[ 3.295578] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 3.296579] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.297483] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.298381] usb usb2: Product: EHCI Host Controller
[ 3.299272] usb usb2: Manufacturer: Linux 3.4.0-rc3-default ehci_hcd
[ 3.300168] usb usb2: SerialNumber: 0000:00:1d.0
[ 3.301149] hub 2-0:1.0: USB hub found
[ 3.302026] hub 2-0:1.0: 2 ports detected
[ 3.302945] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.303871] usbcore: registered new interface driver uas
[ 3.304835] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2] at 0x60,0x64 irq 1,12
[ 3.308003] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.308944] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.309997] mousedev: PS/2 mouse device common for all mice
[ 3.311171] rtc_cmos 00:05: RTC can wake from S4
[ 3.312221] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 3.313180] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 3.314152] i2c /dev entries driver
[ 3.315442] gspca_main: v2.14.0 registered
[ 3.316438] usbcore: registered new interface driver uvcvideo
[ 3.317391] USB Video Class driver (1.1.1)
[ 3.318428] coretemp coretemp.0: TjMax is 100 degrees C
[ 3.318438] coretemp coretemp.0: TjMax is 100 degrees C
[ 3.318447] coretemp coretemp.0: TjMax is 100 degrees C
[ 3.318479] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 3.319498] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 3.320498] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 3.321430] iTCO_vendor_support: vendor-support=0
[ 3.322374] md: linear personality registered for level -1
[ 3.323289] md: raid0 personality registered for level 0
[ 3.324201] md: raid1 personality registered for level 1
[ 3.325093] md: raid10 personality registered for level 10
[ 3.325596] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 3.326930] md: raid6 personality registered for level 6
[ 3.327859] md: raid5 personality registered for level 5
[ 3.328773] md: raid4 personality registered for level 4
[ 3.329708] device-mapper: uevent: version 1.0.3
[ 3.330666] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 3.331633] device-mapper: dm-log-userspace: version 1.1.0 loaded
[ 3.332578] usbcore: registered new interface driver btusb
[ 3.333574] cpuidle: using governor ladder
[ 3.334591] cpuidle: using governor menu
[ 3.335577] sdhci: Secure Digital Host Controller Interface driver
[ 3.336496] sdhci: Copyright(c) Pierre Ossman
[ 3.337723] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 3.339612] usbcore: registered new interface driver usbhid
[ 3.340555] usbhid: USB HID core driver
[ 3.341589] mei 0000:00:16.0: setting latency timer to 64
[ 3.341636] mei 0000:00:16.0: irq 46 for MSI/MSI-X
[ 3.367657] input: Dell WMI hotkeys as /devices/virtual/input/input6
[ 3.378991] intel_oaktrail: Platform not recognized (You could try the module's force-parameter)
[ 3.379229] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[ 3.575238] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.581715] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 3.583058] ata1.00: ATA-8: WDC WD7500BPKT-75PK4T0, 01.01A01, max UDMA/133
[ 3.584125] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 3.585144] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 3.591682] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 3.593073] ata1.00: configured for UDMA/133
[ 3.605431] scsi 0:0:0:0: Direct-Access ATA WDC WD7500BPKT-7 01.0 PQ: 0 ANSI: 5
[ 3.606968] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[ 3.607078] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.609056] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 3.610168] sd 0:0:0:0: [sda] Write Protect is off
[ 3.611186] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.611218] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.712457] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 3.714557] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.735511] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 3.736601] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.738403] hub 1-1:1.0: USB hub found
[ 3.739661] hub 1-1:1.0: 6 ports detected
[ 3.854843] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 3.954668] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.959006] ata5.00: ATAPI: PLDS DVD+/-RW DS-8A8SH, KD11, max UDMA/100
[ 3.965342] ata5.00: configured for UDMA/100
[ 3.978587] scsi 4:0:0:0: CD-ROM PLDS DVD+-RW DS-8A8SH KD11 PQ: 0 ANSI: 5
[ 3.988674] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.989793] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.991284] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 3.991595] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 3.996029] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
[ 4.004976] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 4.006093] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.007631] hub 2-1:1.0: USB hub found
[ 4.008839] hub 2-1:1.0: 8 ports detected
[ 4.023639] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 4.024890] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 4.026111] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 4.027807] ALSA device list:
[ 4.028941] #0: HDA Intel PCH at 0xf7f00000 irq 47
[ 4.030128] TCP: cubic registered
[ 4.031218] NET: Registered protocol family 17
[ 4.032345] Bluetooth: RFCOMM TTY layer initialized
[ 4.033440] Bluetooth: RFCOMM socket layer initialized
[ 4.034532] Bluetooth: RFCOMM ver 1.11
[ 4.035596] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 4.036660] Bluetooth: BNEP filters: protocol multicast
[ 4.037695] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 4.039056] sctp: Hash tables configured (established 65536 bind 65536)
[ 4.040260] Registering the dns_resolver key type
[ 4.041660] PM: Checking hibernation image partition /dev/sda6
[ 4.041665] PM: Hibernation image partition 8:6 present
[ 4.041666] PM: Looking for hibernation image.
[ 4.052223] PM: Image not found (code -22)
[ 4.052225] PM: Hibernation image not present or could not be loaded.
[ 4.052238] registered taskstats version 1
[ 4.054486] rtc_cmos 00:05: setting system clock to 2012-04-27 00:00:22 UTC (1335484822)
[ 4.056350] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
[ 4.084652] usb 1-1.5: new high-speed USB device number 3 using ehci_hcd
[ 4.202407] usb 1-1.5: New USB device found, idVendor=05ca, idProduct=1820
[ 4.203355] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.204249] usb 1-1.5: Product: Laptop_Integrated_Webcam_FHD
[ 4.205127] usb 1-1.5: Manufacturer: CN01MWM9724871A4KB28A00
[ 4.206968] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_FHD (05ca:1820)
[ 4.209739] input: Laptop_Integrated_Webcam_FHD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input11
[ 4.284374] usb 2-1.2: new low-speed USB device number 3 using ehci_hcd
[ 4.304838] input: DualPoint Stick as /devices/platform/i8042/serio1/input/input12
[ 4.319621] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input13
[ 4.334118] ata6: SATA link down (SStatus 0 SControl 300)
[ 4.335163] md: Waiting for all devices to be available before autodetect
[ 4.336074] md: If you don't use raid, use raid=noautodetect
[ 4.337371] md: Autodetecting RAID arrays.
[ 4.338314] md: Scanned 0 and added 0 devices.
[ 4.339255] md: autorun ...
[ 4.340180] md: ... autorun DONE.
[ 4.394844] kjournald starting. Commit interval 5 seconds
[ 4.395094] EXT3-fs (sda5): mounted filesystem with writeback data mode
[ 4.395107] VFS: Mounted root (ext3 filesystem) readonly on device 8:5.
[ 4.402493] usb 2-1.2: New USB device found, idVendor=04f2, idProduct=0116
[ 4.403480] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.404366] usb 2-1.2: Product: USB Keyboard
[ 4.405237] usb 2-1.2: Manufacturer: CHICONY
[ 4.411612] input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input14
[ 4.412714] generic-usb 0003:04F2:0116.0001: input,hidraw0: USB HID v1.10 Keyboard [CHICONY USB Keyboard] on usb-0000:00:1d.0-1.2/input0
[ 4.435944] devtmpfs: mounted
[ 4.437031] Freeing unused kernel memory: 544k freed
[ 4.494063] usb 2-1.3: new full-speed USB device number 4 using ehci_hcd
[ 4.605129] usb 2-1.3: New USB device found, idVendor=138a, idProduct=0011
[ 4.606154] usb 2-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[ 4.607062] usb 2-1.3: SerialNumber: 56ed5821afe2
[ 4.683776] usb 2-1.6: new high-speed USB device number 5 using ehci_hcd
[ 5.046597] usb 2-1.6: New USB device found, idVendor=0bda, idProduct=0138
[ 5.047645] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5.048566] usb 2-1.6: Product: USB2.0-CRW
[ 5.049483] usb 2-1.6: Manufacturer: Generic
[ 5.050391] usb 2-1.6: SerialNumber: 20090516388200000
[ 7.469117] udevd[1743]: starting version 171
[ 9.405279] ACPI Warning: 0x000000000000f040-0x000000000000f05f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120320/utaddress-251)
[ 9.405285] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.469479] Initializing USB Mass Storage driver...
[ 9.469566] scsi6 : usb-storage 2-1.6:1.0
[ 9.469652] usbcore: registered new interface driver usb-storage
[ 9.469654] USB Mass Storage support registered.
[ 9.822705] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d
[ 9.822708] Copyright(c) 2003-2012 Intel Corporation
[ 9.822847] iwlwifi 0000:09:00.0: pci_resource_len = 0x00002000
[ 9.822849] iwlwifi 0000:09:00.0: pci_resource_base = ffffc900066e4000
[ 9.822851] iwlwifi 0000:09:00.0: HW Revision ID = 0x34
[ 9.822937] iwlwifi 0000:09:00.0: irq 48 for MSI/MSI-X
[ 10.257726] iwlwifi 0000:09:00.0: loaded firmware version 17.168.5.2 build 35905
[ 10.257826] iwlwifi 0000:09:00.0: CONFIG_IWLWIFI_DEBUG enabled
[ 10.257828] iwlwifi 0000:09:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[ 10.257830] iwlwifi 0000:09:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[ 10.257831] iwlwifi 0000:09:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled
[ 10.257833] iwlwifi 0000:09:00.0: CONFIG_IWLWIFI_P2P disabled
[ 10.257843] iwlwifi 0000:09:00.0: Detected Intel(R) Centrino(R) Wireless-N 1030 BGN, REV=0xB0
[ 10.257897] iwlwifi 0000:09:00.0: L1 Disabled; Enabling L0S
[ 10.275032] iwlwifi 0000:09:00.0: device EEPROM VER=0x71a, CALIB=0x6
[ 10.275033] iwlwifi 0000:09:00.0: Device SKU: 0x150
[ 10.275035] iwlwifi 0000:09:00.0: Valid Tx ant: 0x1, Valid Rx ant: 0x3
[ 10.275048] iwlwifi 0000:09:00.0: Tunable channels: 13 802.11bg, 0 802.11a channels
[ 10.275207] Registered led device: phy0-led
[ 10.275270] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 10.468151] scsi 6:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 10.468346] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 10.473802] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 12.168257] EXT3-fs (sda5): using internal journal
[ 12.408135] Adding 4998972k swap on /dev/sda6. Priority:-1 extents:1 across:4998972k
[ 15.990754] r8169 0000:05:00.0: eth0: unable to load firmware patch rtl_nic/rtl8168e-2.fw (-2)
[ 16.020515] r8169 0000:05:00.0: eth0: link down
[ 16.020547] r8169 0000:05:00.0: eth0: link down
[ 17.695109] r8169 0000:05:00.0: eth0: link up
[ 21.864430] microcode: CPU0 updated to revision 0x25, date = 2011-10-11
[ 21.864783] microcode: CPU1 updated to revision 0x25, date = 2011-10-11
[ 21.865123] microcode: CPU2 updated to revision 0x25, date = 2011-10-11
[ 21.865462] microcode: CPU3 updated to revision 0x25, date = 2011-10-11
[ 22.208292] [drm] Changing LVDS panel from (+hsync, -vsync) to (-hsync, -vsync)
[ 24.070050] r8169 0000:05:00.0: eth0: link down
[ 26.502585] r8169 0000:05:00.0: eth0: link up
[ 42.358220] [drm] Changing LVDS panel from (-hsync, -vsync) to (+hsync, -vsync)
[ 48.504878] ata1.00: configured for UDMA/133
[ 48.504881] ata1: EH complete
[ 75.608339] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 108
[ 75.608349] pciehp 0000:00:1c.7:pcie04: LinkState change
[ 75.608352] pciehp 0000:00:1c.7:pcie04: lnk_status = 7011
[ 75.608353] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
[ 75.608356] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
[ 75.608394] pciehp 0000:00:1c.7:pcie04: Surprise Removal
[ 75.608428] pciehp 0000:00:1c.7:pcie04: check_link_active: lnk_status = 7011
[ 75.717866] pciehp 0000:00:1c.7:pcie04: pciehp_check_link_status: lnk_status = 7011
[ 75.717971] pci 0000:11:00.0: [1033:0194] type 00 class 0x0c0330
[ 75.718022] pci 0000:11:00.0: reg 10: [mem 0x00000000-0x00001fff 64bit]
[ 75.718265] pci 0000:11:00.0: PME# supported from D0 D3hot
[ 75.737878] pci 0000:11:00.0: BAR 0: assigned [mem 0xf6c00000-0xf6c01fff 64bit]
[ 75.737923] pcieport 0000:00:1c.7: PCI bridge to [bus 11-16]
[ 75.737927] pcieport 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
[ 75.737932] pcieport 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff]
[ 75.737936] pcieport 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
[ 81.925632] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 108
[ 81.925635] pciehp 0000:00:1c.7:pcie04: LinkState change
[ 81.925638] pciehp 0000:00:1c.7:pcie04: lnk_status = 5011
[ 81.925640] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
[ 81.925643] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
[ 81.925681] pciehp 0000:00:1c.7:pcie04: Surprise Removal
[ 81.925711] pciehp 0000:00:1c.7:pcie04: Disabling domain:bus:device=0000:11:00
[ 81.925714] pciehp 0000:00:1c.7:pcie04: pciehp_unconfigure_device: domain:bus:dev = 0000:11:00
[ 81.925780] pci 0000:11:00.0: freeing pci_dev info
[ 86.061835] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 108
[ 86.061845] pciehp 0000:00:1c.7:pcie04: LinkState change
[ 86.061848] pciehp 0000:00:1c.7:pcie04: lnk_status = 7011
[ 86.061849] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
[ 86.061852] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
[ 86.061890] pciehp 0000:00:1c.7:pcie04: Surprise Removal
[ 86.061923] pciehp 0000:00:1c.7:pcie04: check_link_active: lnk_status = 7011
[ 86.162306] pciehp 0000:00:1c.7:pcie04: pciehp_check_link_status: lnk_status = 7011
[ 86.162416] pci 0000:11:00.0: [1033:0194] type 00 class 0x0c0330
[ 86.162467] pci 0000:11:00.0: reg 10: [mem 0x00000000-0x00001fff 64bit]
[ 86.162711] pci 0000:11:00.0: PME# supported from D0 D3hot
[ 86.182332] pci 0000:11:00.0: BAR 0: assigned [mem 0xf6c00000-0xf6c01fff 64bit]
[ 86.182366] pcieport 0000:00:1c.7: PCI bridge to [bus 11-16]
[ 86.182380] pcieport 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
[ 86.182385] pcieport 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff]
[ 86.182389] pcieport 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
[ 91.591178] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 108
[ 91.591181] pciehp 0000:00:1c.7:pcie04: LinkState change
[ 91.591185] pciehp 0000:00:1c.7:pcie04: lnk_status = 5011
[ 91.591186] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
[ 91.591189] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
[ 91.591226] pciehp 0000:00:1c.7:pcie04: Surprise Removal
[ 91.591256] pciehp 0000:00:1c.7:pcie04: Disabling domain:bus:device=0000:11:00
[ 91.591259] pciehp 0000:00:1c.7:pcie04: pciehp_unconfigure_device: domain:bus:dev = 0000:11:00
[ 91.591329] pci 0000:11:00.0: freeing pci_dev info
[ 94.377943] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 108
[ 94.377952] pciehp 0000:00:1c.7:pcie04: LinkState change
[ 94.377955] pciehp 0000:00:1c.7:pcie04: lnk_status = 7011
[ 94.377957] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
[ 94.377960] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
[ 94.377998] pciehp 0000:00:1c.7:pcie04: Surprise Removal
[ 94.378031] pciehp 0000:00:1c.7:pcie04: check_link_active: lnk_status = 7011
[ 94.479926] pciehp 0000:00:1c.7:pcie04: pciehp_check_link_status: lnk_status = 7011
[ 94.480023] pci 0000:11:00.0: [1033:0194] type 00 class 0x0c0330
[ 94.480082] pci 0000:11:00.0: reg 10: [mem 0x00000000-0x00001fff 64bit]
[ 94.480329] pci 0000:11:00.0: PME# supported from D0 D3hot
[ 94.499944] pci 0000:11:00.0: BAR 0: assigned [mem 0xf6c00000-0xf6c01fff 64bit]
[ 94.499980] pcieport 0000:00:1c.7: PCI bridge to [bus 11-16]
[ 94.499996] pcieport 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
[ 94.500001] pcieport 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff]
[ 94.500005] pcieport 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
[ 98.005158] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 108
[ 98.005160] pciehp 0000:00:1c.7:pcie04: LinkState change
[ 98.005164] pciehp 0000:00:1c.7:pcie04: lnk_status = 5011
[ 98.005165] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
[ 98.005168] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
[ 98.005205] pciehp 0000:00:1c.7:pcie04: Surprise Removal
[ 98.005235] pciehp 0000:00:1c.7:pcie04: Disabling domain:bus:device=0000:11:00
[ 98.005238] pciehp 0000:00:1c.7:pcie04: pciehp_unconfigure_device: domain:bus:dev = 0000:11:00
[ 98.005301] pci 0000:11:00.0: freeing pci_dev info
[ 100.394702] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 108
[ 100.394712] pciehp 0000:00:1c.7:pcie04: LinkState change
[ 100.394715] pciehp 0000:00:1c.7:pcie04: lnk_status = 7011
[ 100.394716] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
[ 100.394718] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
[ 100.394757] pciehp 0000:00:1c.7:pcie04: Surprise Removal
[ 100.394791] pciehp 0000:00:1c.7:pcie04: check_link_active: lnk_status = 7011
[ 100.500968] pciehp 0000:00:1c.7:pcie04: pciehp_check_link_status: lnk_status = 7011
[ 100.501072] pci 0000:11:00.0: [1033:0194] type 00 class 0x0c0330
[ 100.501122] pci 0000:11:00.0: reg 10: [mem 0x00000000-0x00001fff 64bit]
[ 100.501369] pci 0000:11:00.0: PME# supported from D0 D3hot
[ 100.520988] pci 0000:11:00.0: BAR 0: assigned [mem 0xf6c00000-0xf6c01fff 64bit]
[ 100.521034] pcieport 0000:00:1c.7: PCI bridge to [bus 11-16]
[ 100.521037] pcieport 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
[ 100.521041] pcieport 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff]
[ 100.521046] pcieport 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
[ 103.401369] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 108
[ 103.401372] pciehp 0000:00:1c.7:pcie04: LinkState change
[ 103.401375] pciehp 0000:00:1c.7:pcie04: lnk_status = 5011
[ 103.401376] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
[ 103.401379] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
[ 103.401419] pciehp 0000:00:1c.7:pcie04: Surprise Removal
[ 103.401448] pciehp 0000:00:1c.7:pcie04: Disabling domain:bus:device=0000:11:00
[ 103.401451] pciehp 0000:00:1c.7:pcie04: pciehp_unconfigure_device: domain:bus:dev = 0000:11:00
[ 103.401515] pci 0000:11:00.0: freeing pci_dev info
[ 106.089613] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 108
[ 106.089623] pciehp 0000:00:1c.7:pcie04: LinkState change
[ 106.089626] pciehp 0000:00:1c.7:pcie04: lnk_status = 7011
[ 106.089627] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
[ 106.089630] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
[ 106.089669] pciehp 0000:00:1c.7:pcie04: Surprise Removal
[ 106.089702] pciehp 0000:00:1c.7:pcie04: check_link_active: lnk_status = 7011
[ 106.192493] pciehp 0000:00:1c.7:pcie04: pciehp_check_link_status: lnk_status = 7011
[ 106.192594] pci 0000:11:00.0: [1033:0194] type 00 class 0x0c0330
[ 106.192645] pci 0000:11:00.0: reg 10: [mem 0x00000000-0x00001fff 64bit]
[ 106.192891] pci 0000:11:00.0: PME# supported from D0 D3hot
[ 106.212517] pci 0000:11:00.0: BAR 0: assigned [mem 0xf6c00000-0xf6c01fff 64bit]
[ 106.212561] pcieport 0000:00:1c.7: PCI bridge to [bus 11-16]
[ 106.212564] pcieport 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
[ 106.212569] pcieport 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff]
[ 106.212574] pcieport 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
[ 108.854623] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 108
[ 108.854625] pciehp 0000:00:1c.7:pcie04: LinkState change
[ 108.854629] pciehp 0000:00:1c.7:pcie04: lnk_status = 5011
[ 108.854630] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
[ 108.854633] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
[ 108.854673] pciehp 0000:00:1c.7:pcie04: Surprise Removal
[ 108.854703] pciehp 0000:00:1c.7:pcie04: Disabling domain:bus:device=0000:11:00
[ 108.854706] pciehp 0000:00:1c.7:pcie04: pciehp_unconfigure_device: domain:bus:dev = 0000:11:00
[ 108.854770] pci 0000:11:00.0: freeing pci_dev info
[ 131.603188] usb 2-1.2: USB disconnect, device number 3
[ 136.697244] usb 2-1.2: new high-speed USB device number 6 using ehci_hcd
[ 136.808835] usb 2-1.2: New USB device found, idVendor=05e3, idProduct=0608
[ 136.808845] usb 2-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 136.808851] usb 2-1.2: Product: USB2.0 Hub
[ 136.809376] hub 2-1.2:1.0: USB hub found
[ 136.809692] hub 2-1.2:1.0: 4 ports detected
[ 141.779944] usb 2-1.2.4: new low-speed USB device number 7 using ehci_hcd
[ 141.897638] usb 2-1.2.4: New USB device found, idVendor=04f2, idProduct=0116
[ 141.897648] usb 2-1.2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 141.897655] usb 2-1.2.4: Product: USB Keyboard
[ 141.897660] usb 2-1.2.4: Manufacturer: CHICONY
[ 141.902301] input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2.4/2-1.2.4:1.0/input/input15
[ 141.902375] generic-usb 0003:04F2:0116.0002: input,hidraw0: USB HID v1.10 Keyboard [CHICONY USB Keyboard] on usb-0000:00:1d.0-1.2.4/input0
[ 160.981322] usb 2-1.2.3: new low-speed USB device number 8 using ehci_hcd
[ 161.097411] usb 2-1.2.3: New USB device found, idVendor=046d, idProduct=c050
[ 161.097422] usb 2-1.2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 161.097429] usb 2-1.2.3: Product: USB-PS/2 Optical Mouse
[ 161.097434] usb 2-1.2.3: Manufacturer: Logitech
[ 161.101934] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2.3/2-1.2.3:1.0/input/input16
[ 161.102215] generic-usb 0003:046D:C050.0003: input,hidraw1: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1.2.3/input0
[-- Attachment #3: lspci_00.1c.7.txt --]
[-- Type: text/plain, Size: 16459 bytes --]
00:1c.7 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=11, subordinate=16, sec-latency=0
I/O behind bridge: 0000c000-0000dfff
Memory behind bridge: f6c00000-f7cfffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f10fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #8, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #7, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq+ LinkChg+
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee00318 Data: 0000
Capabilities: [90] Subsystem: Dell Device 04b3
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport
Kernel modules: shpchp
00: 86 80 1e 1c 07 04 10 00 b5 00 04 06 10 00 81 00
10: 00 00 00 00 00 00 00 00 00 11 16 00 c0 d0 00 20
20: c0 f6 c0 f7 01 f0 01 f1 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 04 10 00
40: 10 80 42 01 00 80 00 00 00 00 11 00 12 3c 12 08
50: 40 00 11 50 60 b2 3c 00 28 10 00 00 00 00 00 00
60: 00 00 00 00 16 00 00 00 00 00 00 00 00 00 00 00
70: 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 05 90 01 00 18 03 e0 fe 00 00 00 00 00 00 00 00
90: 0d a0 00 00 28 10 b3 04 00 00 00 00 00 00 00 00
a0: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 01 02 0b 00 00 02 80 11 c1 00 00 00 00
e0: 00 03 00 00 00 00 00 00 03 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 87 0f 06 08 00 00 00 00
100: 00 00 00 00 00 00 00 00 00 40 00 00 11 00 06 00
110: 01 00 00 00 00 20 00 00 00 00 00 00 00 00 00 00
120: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
130: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
140: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
150: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
160: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
170: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
190: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
210: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
220: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
230: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
240: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
250: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
260: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
270: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
280: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
290: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
300: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
310: 00 00 00 00 1b 36 3a 74 00 00 14 14 31 17 42 00
320: 5b 60 09 00 20 20 00 0a 00 00 00 00 ff 0f 00 00
330: 16 00 00 28 bc b5 bc 4a 00 00 00 00 74 4c 85 00
340: 00 00 00 00 21 00 05 00 30 00 0c 00 00 00 00 00
350: 2b 00 fe 00 01 00 08 00 00 00 00 00 00 00 00 00
360: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
370: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
380: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
390: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
3a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
3b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
3c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
3d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
3e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
3f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
410: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
420: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
430: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
440: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
450: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
460: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
470: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
480: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
490: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
4a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
4b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
4c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
4d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
4e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
4f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
510: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
520: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
530: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
540: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
550: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
560: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
570: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
580: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
590: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
5a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
5b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
5c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
5d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
5e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
5f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
600: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
610: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
620: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
630: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
640: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
650: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
660: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
670: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
680: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
690: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
6a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
6b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
6c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
6d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
6e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
6f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
700: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
710: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
720: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
730: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
740: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
750: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
760: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
770: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
780: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
790: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
7a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
7b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
7c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
7d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
7e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
7f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
810: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
820: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
830: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
840: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
850: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
860: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
870: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
880: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
890: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
8a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
8b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
8c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
8d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
8e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
8f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
900: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
910: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
920: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
930: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
940: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
950: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
960: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
970: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
980: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
990: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
9a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
9b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
9c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
9d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
9e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
9f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
aa0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ab0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ac0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ad0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ae0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
af0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ba0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
bb0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
bc0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
bd0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
be0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
bf0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ca0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
cb0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
cc0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
cd0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ce0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
cf0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
da0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
db0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
dc0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
dd0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
de0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
df0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ea0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
eb0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ec0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ed0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ee0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ef0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
fa0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
fb0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
fc0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
fd0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
fe0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ff0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: 3.2.11: PCI Express card cannot be re-detected withing cca 60sec timeframe
2012-04-26 22:08 ` Martin Mokrejs
@ 2012-04-26 22:44 ` Yinghai Lu
2012-04-26 23:26 ` Martin Mokrejs
0 siblings, 1 reply; 55+ messages in thread
From: Yinghai Lu @ 2012-04-26 22:44 UTC (permalink / raw)
To: Martin Mokrejs; +Cc: Sarah Sharp, linux-pci, Linux Kernel Mailing List
On Thu, Apr 26, 2012 at 3:08 PM, Martin Mokrejs
<mmokrejs@fold.natur.cuni.cz> wrote:
>
>
> Yinghai Lu wrote:
>>
>> Can you try boot the system without loading xhci driver ?
>
> Bingo! Physical express card removal started to be notified correctly.
good, please get lspci -vvxxx -s 00:1c.7
before removing that express card
on both case.
We can compare those two to find out why.
Thanks
Yinghai
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: 3.2.11: PCI Express card cannot be re-detected withing cca 60sec timeframe
2012-04-26 22:44 ` Yinghai Lu
@ 2012-04-26 23:26 ` Martin Mokrejs
2012-04-27 3:51 ` Yinghai Lu
0 siblings, 1 reply; 55+ messages in thread
From: Martin Mokrejs @ 2012-04-26 23:26 UTC (permalink / raw)
To: Yinghai Lu; +Cc: Sarah Sharp, linux-pci, Linux Kernel Mailing List
[-- Attachment #1: Type: text/plain, Size: 579 bytes --]
Yinghai Lu wrote:
> On Thu, Apr 26, 2012 at 3:08 PM, Martin Mokrejs
> <mmokrejs@fold.natur.cuni.cz> wrote:
>>
>>
>> Yinghai Lu wrote:
>>>
>>> Can you try boot the system without loading xhci driver ?
>>
>> Bingo! Physical express card removal started to be notified correctly.
>
> good, please get lspci -vvxxx -s 00:1c.7
> before removing that express card
> on both case.
>
> We can compare those two to find out why.
Attached. Well, I told you in the very beginning of this looong thread it
happens only with the USB3.0 card but not Firewire nor COM+LPT card. ;)
Martin
[-- Attachment #2: lspci_00.1c.7__card_inserted_no_xhci.txt --]
[-- Type: text/plain, Size: 16465 bytes --]
00:1c.7 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=11, subordinate=16, sec-latency=0
I/O behind bridge: 0000c000-0000dfff
Memory behind bridge: f6c00000-f7cfffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f10fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #8, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #7, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq+ LinkChg+
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee00318 Data: 0000
Capabilities: [90] Subsystem: Dell Device 04b3
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport
Kernel modules: shpchp
00: 86 80 1e 1c 07 04 10 00 b5 00 04 06 10 00 81 00
10: 00 00 00 00 00 00 00 00 00 11 16 00 c0 d0 00 00
20: c0 f6 c0 f7 01 f0 01 f1 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 04 10 00
40: 10 80 42 01 00 80 00 00 00 00 11 00 12 3c 12 08
50: 43 00 11 70 60 b2 3c 00 28 10 40 00 00 00 00 00
60: 00 00 00 00 16 00 00 00 00 00 00 00 00 00 00 00
70: 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 05 90 01 00 18 03 e0 fe 00 00 00 00 00 00 00 00
90: 0d a0 00 00 28 10 b3 04 00 00 00 00 00 00 00 00
a0: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 01 02 0b 00 00 02 80 11 c1 00 00 00 00
e0: 00 03 00 00 00 00 00 00 03 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 87 0f 06 08 00 00 00 00
100: 00 00 00 00 00 00 00 00 00 40 00 00 11 00 06 00
110: 01 00 00 00 00 20 00 00 00 00 00 00 00 00 00 00
120: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
130: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
140: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
150: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
160: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
170: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
190: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
210: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
220: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
230: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
240: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
250: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
260: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
270: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
280: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
290: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
300: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
310: 00 00 00 00 1b 36 3a 74 00 00 14 14 31 17 42 00
320: 5b 60 09 00 20 20 00 0a fb 10 c8 04 fa 00 fa 00
330: 16 00 00 28 bc b5 bc 4a 00 00 00 00 74 4c 85 00
340: 01 00 01 00 21 00 05 00 30 00 0c 00 27 00 fa 00
350: 2b 00 fe 00 01 00 08 00 00 00 00 00 00 00 00 00
360: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
370: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
380: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
390: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
3a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
3b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
3c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
3d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
3e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
3f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
410: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
420: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
430: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
440: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
450: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
460: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
470: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
480: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
490: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
4a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
4b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
4c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
4d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
4e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
4f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
510: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
520: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
530: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
540: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
550: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
560: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
570: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
580: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
590: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
5a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
5b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
5c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
5d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
5e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
5f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
600: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
610: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
620: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
630: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
640: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
650: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
660: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
670: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
680: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
690: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
6a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
6b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
6c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
6d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
6e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
6f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
700: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
710: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
720: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
730: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
740: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
750: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
760: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
770: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
780: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
790: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
7a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
7b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
7c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
7d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
7e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
7f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
810: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
820: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
830: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
840: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
850: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
860: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
870: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
880: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
890: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
8a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
8b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
8c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
8d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
8e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
8f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
900: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
910: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
920: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
930: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
940: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
950: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
960: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
970: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
980: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
990: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
9a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
9b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
9c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
9d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
9e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
9f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
aa0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ab0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ac0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ad0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ae0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
af0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ba0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
bb0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
bc0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
bd0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
be0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
bf0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ca0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
cb0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
cc0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
cd0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ce0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
cf0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
da0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
db0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
dc0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
dd0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
de0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
df0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ea0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
eb0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ec0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ed0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ee0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ef0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
fa0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
fb0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
fc0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
fd0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
fe0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ff0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[-- Attachment #3: lspci_00.1c.7__card_inserted_with_xhci.txt --]
[-- Type: text/plain, Size: 16465 bytes --]
00:1c.7 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=11, subordinate=16, sec-latency=0
I/O behind bridge: 0000c000-0000dfff
Memory behind bridge: f6c00000-f7cfffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f10fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #8, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #7, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq+ LinkChg+
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee00318 Data: 0000
Capabilities: [90] Subsystem: Dell Device 04b3
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport
Kernel modules: shpchp
00: 86 80 1e 1c 07 04 10 00 b5 00 04 06 10 00 81 00
10: 00 00 00 00 00 00 00 00 00 11 16 00 c0 d0 00 00
20: c0 f6 c0 f7 01 f0 01 f1 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 04 10 00
40: 10 80 42 01 00 80 00 00 00 00 10 00 12 3c 12 08
50: 43 00 11 70 60 b2 3c 00 28 10 40 00 00 00 00 00
60: 00 00 00 00 16 00 00 00 00 00 00 00 00 00 00 00
70: 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 05 90 01 00 18 03 e0 fe 00 00 00 00 00 00 00 00
90: 0d a0 00 00 28 10 b3 04 00 00 00 00 00 00 00 00
a0: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 01 02 0b 00 00 02 80 11 c1 00 00 00 00
e0: 00 03 00 00 00 00 00 00 03 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 87 0f 06 08 00 00 00 00
100: 00 00 00 00 00 00 00 00 00 40 00 00 11 00 06 00
110: 00 00 00 00 00 20 00 00 00 00 00 00 00 00 00 00
120: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
130: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
140: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
150: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
160: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
170: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
190: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
1f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
210: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
220: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
230: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
240: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
250: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
260: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
270: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
280: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
290: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
300: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
310: 00 00 00 00 1b 36 3a 74 00 00 14 14 31 17 42 00
320: 5b 60 09 00 20 20 00 0a 28 14 18 08 27 04 ef 03
330: 16 00 00 28 bc b5 bc 4a 00 00 00 00 74 4c 85 00
340: 3b 00 3b 00 5b 00 3f 00 32 00 0e 00 2f 00 e9 00
350: 33 00 ed 00 01 00 0c 00 04 00 04 00 00 00 00 00
360: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
370: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
380: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
390: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
3a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
3b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
3c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
3d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
3e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
3f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
410: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
420: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
430: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
440: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
450: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
460: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
470: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
480: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
490: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
4a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
4b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
4c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
4d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
4e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
4f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
510: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
520: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
530: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
540: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
550: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
560: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
570: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
580: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
590: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
5a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
5b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
5c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
5d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
5e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
5f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
600: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
610: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
620: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
630: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
640: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
650: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
660: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
670: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
680: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
690: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
6a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
6b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
6c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
6d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
6e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
6f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
700: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
710: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
720: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
730: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
740: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
750: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
760: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
770: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
780: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
790: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
7a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
7b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
7c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
7d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
7e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
7f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
810: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
820: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
830: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
840: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
850: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
860: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
870: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
880: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
890: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
8a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
8b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
8c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
8d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
8e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
8f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
900: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
910: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
920: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
930: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
940: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
950: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
960: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
970: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
980: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
990: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
9a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
9b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
9c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
9d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
9e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
9f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
aa0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ab0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ac0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ad0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ae0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
af0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ba0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
bb0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
bc0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
bd0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
be0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
bf0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ca0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
cb0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
cc0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
cd0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ce0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
cf0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
da0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
db0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
dc0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
dd0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
de0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
df0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ea0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
eb0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ec0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ed0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ee0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ef0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
fa0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
fb0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
fc0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
fd0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
fe0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ff0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: 3.2.11: PCI Express card cannot be re-detected withing cca 60sec timeframe
2012-04-26 23:26 ` Martin Mokrejs
@ 2012-04-27 3:51 ` Yinghai Lu
0 siblings, 0 replies; 55+ messages in thread
From: Yinghai Lu @ 2012-04-27 3:51 UTC (permalink / raw)
To: Martin Mokrejs; +Cc: Sarah Sharp, linux-pci, Linux Kernel Mailing List
On Thu, Apr 26, 2012 at 4:26 PM, Martin Mokrejs
<mmokrejs@fold.natur.cuni.cz> wrote:
> Yinghai Lu wrote:
>> On Thu, Apr 26, 2012 at 3:08 PM, Martin Mokrejs
>> <mmokrejs@fold.natur.cuni.cz> wrote:
>>>
>>>
>>> Yinghai Lu wrote:
>>>>
>>>> Can you try boot the system without loading xhci driver ?
>>>
>>> Bingo! Physical express card removal started to be notified correctly.
>>
>> good, please get lspci -vvxxx -s 00:1c.7
>> before removing that express card
>> on both case.
>>
>> We can compare those two to find out why.
>
> Attached. Well, I told you in the very beginning of this looong thread it
> happens only with the USB3.0 card but not Firewire nor COM+LPT card. ;)
only have difference on DevStatus...
not sure how that card could make difference on surprise removal.
--- lspci_00.1c.7__card_inserted_no_xhci.txt 2012-04-26
20:41:43.000000000 -0700
+++ lspci_00.1c.7__card_inserted_with_xhci.txt 2012-04-26
20:41:48.000000000 -0700
@@ -15,7 +15,7 @@
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
- DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq-
AuxPwr+ TransPend-
+ DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq-
AuxPwr+ TransPend-
LnkCap: Port #8, Speed 5GT/s, Width x1, ASPM L0s L1,
Latency L0 <512ns, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled-
Retrain- CommClk+
@@ -49,7 +49,7 @@
10: 00 00 00 00 00 00 00 00 00 11 16 00 c0 d0 00 00
20: c0 f6 c0 f7 01 f0 01 f1 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 04 10 00
-40: 10 80 42 01 00 80 00 00 00 00 11 00 12 3c 12 08
+40: 10 80 42 01 00 80 00 00 00 00 10 00 12 3c 12 08
50: 43 00 11 70 60 b2 3c 00 28 10 40 00 00 00 00 00
60: 00 00 00 00 16 00 00 00 00 00 00 00 00 00 00 00
70: 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
@@ -62,7 +62,7 @@
e0: 00 03 00 00 00 00 00 00 03 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 87 0f 06 08 00 00 00 00
100: 00 00 00 00 00 00 00 00 00 40 00 00 11 00 06 00
-110: 01 00 00 00 00 20 00 00 00 00 00 00 00 00 00 00
+110: 00 00 00 00 00 20 00 00 00 00 00 00 00 00 00 00
120: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
130: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
140: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: 3.2.11: PCI Express card cannot be re-detected withing cca 60sec timeframe
2012-04-18 19:48 ` Yinghai Lu
2012-04-18 20:29 ` Martin Mokrejs
2012-04-19 17:32 ` Martin Mokrejs
@ 2012-05-04 15:58 ` Martin Mokrejs
2012-05-04 20:43 ` Martin Mokrejs
2 siblings, 1 reply; 55+ messages in thread
From: Martin Mokrejs @ 2012-05-04 15:58 UTC (permalink / raw)
To: Yinghai Lu; +Cc: linux-pci, Linux Kernel Mailing List
Yinghai Lu wrote:
> On Wed, Apr 18, 2012 at 10:53 AM, Martin Mokrejs
> <mmokrejs@fold.natur.cuni.cz> wrote:
>>> After you remove USB3 expresscard, you need to
>>>
>>> echo 1 > /sys/devices/pci0000\:00/0000\:00\:1c.7/pcie_link_disable
>>> then
>>> echo 0 > /sys/devices/pci0000\:00/0000\:00\:1c.7/pcie_link_disable
>>
>> So without these two echo commands the is no improvement/fix.
>>
>> [ 686.701306] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 8
>> [ 686.701316] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
>> [ 686.701319] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
>> [ 686.701357] pciehp 0000:00:1c.7:pcie04: Surprise Removal
>> [ 686.701390] pciehp 0000:00:1c.7:pcie04: check_link_active: lnk_status = 7011
>> [ 686.809763] pciehp 0000:00:1c.7:pcie04: pciehp_check_link_status: lnk_status = 7011
> ...
>> [ 686.833678] hub 6-0:1.0: 2 ports detected
>>
>> echo 1 > /sys/devices/pci0000\:00/0000\:00\:1c.7/pcie_link_disable
>>
>> [ 716.999938] pcieport 0000:00:1c.7: pcie_link_disable_set: lnk_ctrl = 53
>> [ 717.024647] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 8
>> [ 717.024657] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
>> [ 717.024665] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
>> [ 717.024723] pciehp 0000:00:1c.7:pcie04: Surprise Removal
>> [ 717.024753] pciehp 0000:00:1c.7:pcie04: Disabling domain:bus:device=0000:11:00
>> [ 717.024756] pciehp 0000:00:1c.7:pcie04: pciehp_unconfigure_device: domain:bus:dev = 0000:11:00
> ..
>> [ 717.045197] pci 0000:11:00.0: freeing pci_dev info
>>
>> echo 0 > /sys/devices/pci0000\:00/0000\:00\:1c.7/pcie_link_disable
>>
>> [ 748.456914] pcieport 0000:00:1c.7: pcie_link_disable_set: lnk_ctrl = 40
>>
>
> so it is chipset problem, it does not detect and report the presence
> of the card after that link is removed.
>
> Can you try to use acpiphp instead of pciehp?
When I am booted up with CONFIG_HOTPLUG_PCI_ACPI=n and pcie_aspm=off I tested what
happens with several cards. Note that this scenario causes "Unable to request _OSC
control" below and functionally disables my ExpressCard slot:
- Command line: root=/dev/sda5 pciehp.pciehp_debug=1 console=ttyUSB0,115200n8 console=tty0 log_buf_len=409600
+ Command line: root=/dev/sda5 pciehp.pciehp_debug=1 console=ttyUSB0,115200n8 console=tty0 log_buf_len=409600 pcie_aspm=off
-pci0000:00: Requesting ACPI _OSC control (0x1d)
-pci0000:00: ACPI _OSC control (0x19) granted
+pci0000:00: Unable to request _OSC control (_OSC support mask:
The express card works although no driver can pickup and therefore nothing was ever logged
through syslog if I plugged in the card,. Still, I could read the lspci output and compare values.
# dmesg > dmesg_without_CONFIG_HOTPLUG_PCI_ACPI_with_pcie_aspm_off.txt
# lspci -vvxxx -s 00:1c.7 > 1_fresh_bootup.txt
# echo 7 > /proc/sys/kernel/printk
# # inserted DeLock card
# lspci -vvxxx -s 00:1c.7 > 1_inserted_DeLock_unrecognized.txt
# # card removed
# lspci -vvxxx -s 00:1c.7 > 2_unplugged_DeLock_unrecognized.txt
# # re-inserted the card
# lspci -vvxxx -s 00:1c.7 > 3_re-inserted_DeLock_again_unrecognized.txt
# # unplugged and re-inserted the card
# lspci -vvxxx -s 00:1c.7 > 4_unplug_and_re-plug_DeLock_again_unrecognized.txt
# # unplugged DeLock card
# lspci -vvxxx -s 00:1c.7 > 5_unplugged_DeLock_unrecognized.txt
# ## will now play with Evolve_SpeedCard_HC-303SCX with NEC uPD720200 rev. 3
# # inserting Evolve_SpeedCard_HC-303SCX with NEC uPD720200 rev. 3
# lspci -vvxxx -s 00:1c.7 > 6_inserted_Evolve_SpeedCard_HC-303SCX_with_NEC_uPD720200_rev3.txt
# # popped out, grabbing lspci to proof that later
# lspci -vvxxx -s 00:1c.7 > 7_popped_out_Evolve_SpeedCard_HC-303SCX_with_NEC_uPD720200_rev3.txt
# # re-inserting, sits in now for sure
# lspci -vvxxx -s 00:1c.7 > 8_inserted_Evolve_SpeedCard_HC-303SCX_with_NEC_uPD720200_rev3.txt
# # removed
# lspci -vvxxx -s 00:1c.7 > 9_unplugged_Evolve_SpeedCard_HC-303SCX_with_NEC_uPD720200_rev3.txt
# # re-inserting, 2 attempts to get card held mechanically
# lspci -vvxxx -s 00:1c.7 > 9_inserted_Evolve_SpeedCard_HC-303SCX_with_NEC_uPD720200_rev3.txt
# # unplugging card, nothing appeared in syslog
# lspci -vvxxx -s 00:1c.7 > 10_unplugged_Evolve_SpeedCard_HC-303SCX_with_NEC_uPD720200_rev3.txt
# ## now will play with Zalman ZM-EC302 U3 card having also NEC uPD720200 rev. 3
# # inserting
# lspci -vvxxx -s 00:1c.7 > 11_inserted_Zalman_ZM-EC302_U3.txt
# # removed the card
# lspci -vvxxx -s 00:1c.7 > 12_unplugged_Zalman_ZM-EC302_U3.txt
# # re-inserting
# lspci -vvxxx -s 00:1c.7 > 13_re-inserted_Zalman_ZM-EC302_U3.txt
# # removing
# lspci -vvxxx -s 00:1c.7 > 14_unplugged_Zalman_ZM-EC302_U3.txt
# # inserting Axago-ECF-X1_FireWireCard
# lspci -vvxxx -s 00:1c.7 > 15_inserted_Axago-ECF-X1_FireWireCard.txt
# # removed Axago-ECF-X1_FireWireCard
# lspci -vvxxx -s 00:1c.7 > 16_unplugged_Axago-ECF-X1_FireWireCard.txt
# # re-inserted
# lspci -vvxxx -s 00:1c.7 > 17_re-inserted_Axago-ECF-X1_FireWireCard.txt
# # unplugged
# lspci -vvxxx -s 00:1c.7 > 18_unplugged_Axago-ECF-X1_FireWireCard.txt
#
# diff -u -w 1_fresh_bootup.txt 1_inserted_DeLock_unrecognized.txt
--- 1_fresh_bootup.txt 2012-05-04 15:25:23.000000000 +0200
+++ 1_inserted_DeLock_unrecognized.txt 2012-05-04 15:27:29.000000000 +0200
@@ -16,17 +16,17 @@
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
- LnkCap: Port #8, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <16us
+ LnkCap: Port #8, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot-
- LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk-
+ LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
+ LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #7, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
- Changed: MRL- PresDet- LinkState-
+ SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
+ Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
@@ -48,8 +48,8 @@
10: 00 00 00 00 00 00 00 00 00 11 16 00 c0 d0 00 00
20: c0 f6 c0 f7 01 f0 01 f1 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 04 10 00
-40: 10 80 42 01 00 80 00 00 00 00 10 00 12 4c 12 08
-50: 02 00 01 10 60 b2 3c 00 00 00 00 00 00 00 00 00
+40: 10 80 42 01 00 80 00 00 00 00 10 00 12 3c 12 08
+50: 40 00 11 70 60 b2 3c 00 00 00 40 01 00 00 00 00
60: 00 00 00 00 16 00 00 00 00 00 00 00 00 00 00 00
70: 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 05 90 00 00 00 00 00 00 00 00 00 00 00 00 00 00
#
The "PresDet-" on Changed: line does not change but the one on SltSta: line does!
Is that because of the fresh bootup and no previous value to compare with?
No, it never changes even on all below diff outputs. But could Linux cache
the value itself to correct for that?
# diff -u -w 1_inserted_DeLock_unrecognized.txt 2_unplugged_DeLock_unrecognized.txt
--- 1_inserted_DeLock_unrecognized.txt 2012-05-04 15:27:29.000000000 +0200
+++ 2_unplugged_DeLock_unrecognized.txt 2012-05-04 15:34:12.000000000 +0200
@@ -20,12 +20,12 @@
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
+ LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #7, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
+ SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
@@ -49,7 +49,7 @@
20: c0 f6 c0 f7 01 f0 01 f1 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 04 10 00
40: 10 80 42 01 00 80 00 00 00 00 10 00 12 3c 12 08
-50: 40 00 11 70 60 b2 3c 00 00 00 40 01 00 00 00 00
+50: 40 00 11 50 60 b2 3c 00 00 00 00 01 00 00 00 00
60: 00 00 00 00 16 00 00 00 00 00 00 00 00 00 00 00
70: 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 05 90 00 00 00 00 00 00 00 00 00 00 00 00 00 00
# diff -u -w 3_re-inserted_DeLock_again_unrecognized.txt 4_unplug_and_re-plug_DeLock_again_unrecognized.txt
--- 3_re-inserted_DeLock_again_unrecognized.txt 2012-05-04 15:38:55.000000000 +0200
+++ 4_unplug_and_re-plug_DeLock_again_unrecognized.txt 2012-05-04 15:40:05.000000000 +0200
@@ -20,12 +20,12 @@
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt+ ABWMgmt-
+ LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #7, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
+ SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
@@ -49,7 +49,7 @@
20: c0 f6 c0 f7 01 f0 01 f1 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 04 10 00
40: 10 80 42 01 00 80 00 00 00 00 10 00 12 3c 12 08
-50: 40 00 11 50 60 b2 3c 00 00 00 00 01 00 00 00 00
+50: 40 00 11 70 60 b2 3c 00 00 00 40 01 00 00 00 00
60: 00 00 00 00 16 00 00 00 00 00 00 00 00 00 00 00
70: 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 05 90 00 00 00 00 00 00 00 00 00 00 00 00 00 00
# diff -u -w 4_unplug_and_re-plug_DeLock_again_unrecognized.txt 5_unplugged_DeLock_unrecognized.txt
--- 4_unplug_and_re-plug_DeLock_again_unrecognized.txt 2012-05-04 15:40:05.000000000 +0200
+++ 5_unplugged_DeLock_unrecognized.txt 2012-05-04 15:40:48.000000000 +0200
@@ -20,12 +20,12 @@
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
+ LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #7, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
+ SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
@@ -49,7 +49,7 @@
20: c0 f6 c0 f7 01 f0 01 f1 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 04 10 00
40: 10 80 42 01 00 80 00 00 00 00 10 00 12 3c 12 08
-50: 40 00 11 70 60 b2 3c 00 00 00 40 01 00 00 00 00
+50: 40 00 11 50 60 b2 3c 00 00 00 00 01 00 00 00 00
60: 00 00 00 00 16 00 00 00 00 00 00 00 00 00 00 00
70: 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 05 90 00 00 00 00 00 00 00 00 00 00 00 00 00 00
In the below difference, why is there the MAbort+? Is that because
I did not manage to fit in the card so that in was actually unplugged
(no diff between 6_inserted_Ev*.txt and 7_popped_out_Evolve*.txt files
explained below)?
# diff -u -w 5_unplugged_DeLock_unrecognized.txt 6_inserted_Evolve_SpeedCard_HC-303SCX_with_NEC_uPD720200_rev3.txt
--- 5_unplugged_DeLock_unrecognized.txt 2012-05-04 15:40:48.000000000 +0200
+++ 6_inserted_Evolve_SpeedCard_HC-303SCX_with_NEC_uPD720200_rev3.txt 2012-05-04 15:43:16.000000000 +0200
@@ -6,7 +6,7 @@
I/O behind bridge: 0000c000-0000dfff
Memory behind bridge: f6c00000-f7cfffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f10fffff
- Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
+ Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
@@ -15,10 +15,10 @@
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
- DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
+ DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #8, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot-
- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
+ LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
@@ -45,11 +45,11 @@
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport
00: 86 80 1e 1c 07 00 10 00 b5 00 04 06 10 00 81 00
-10: 00 00 00 00 00 00 00 00 00 11 16 00 c0 d0 00 00
+10: 00 00 00 00 00 00 00 00 00 11 16 00 c0 d0 00 20
20: c0 f6 c0 f7 01 f0 01 f1 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 04 10 00
-40: 10 80 42 01 00 80 00 00 00 00 10 00 12 3c 12 08
-50: 40 00 11 50 60 b2 3c 00 00 00 00 01 00 00 00 00
+40: 10 80 42 01 00 80 00 00 00 00 11 00 12 3c 12 08
+50: 42 00 11 50 60 b2 3c 00 00 00 00 01 00 00 00 00
60: 00 00 00 00 16 00 00 00 00 00 00 00 00 00 00 00
70: 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 05 90 00 00 00 00 00 00 00 00 00 00 00 00 00 00
@@ -58,6 +58,6 @@
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 01 02 0b 00 00 02 80 11 c1 00 00 00 00
-e0: 00 03 00 00 00 00 00 00 01 00 00 00 00 00 00 00
+e0: 00 03 00 00 00 00 00 00 03 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 87 0f 06 08 00 00 00 00
# diff -u -w 6_inserted_Evolve_SpeedCard_HC-303SCX_with_NEC_uPD720200_rev3.txt 7_popped_out_Evolve_SpeedCard_HC-303SCX_with_NEC_uPD720200_rev3.txt
OK, so the card was really out in bot cases. But then it means that
the "diff -u -w 5_unplugged_DeLock_unrecognized.txt 6_inserted_Evolve_SpeedCard_HC-303SCX_with_NEC_uPD720200_rev3.txt"
shows the changed to an empty expresscard slot state when Delock was out and after NEC was out). That is why the
PresDet does not appear on a changed line. So, what are those other differences?
Further continuing the comparison, so below I compared the empty slot state (7_popped_out*.txt) with successfull insertion
of the NEC card. Indeed, it has the PresDet changed correctly from "-" to "+".
# diff -u -w 7_popped_out_Evolve_SpeedCard_HC-303SCX_with_NEC_uPD720200_rev3.txt 8_inserted_Evolve_SpeedCard_HC-303SCX_with_NEC_uPD720200_rev3.txt
--- 7_popped_out_Evolve_SpeedCard_HC-303SCX_with_NEC_uPD720200_rev3.txt 2012-05-04 15:44:08.000000000 +0200
+++ 8_inserted_Evolve_SpeedCard_HC-303SCX_with_NEC_uPD720200_rev3.txt 2012-05-04 15:44:58.000000000 +0200
@@ -18,14 +18,14 @@
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #8, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot-
- LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
+ LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt+ ABWMgmt-
+ LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #7, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
+ SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
@@ -49,7 +49,7 @@
20: c0 f6 c0 f7 01 f0 01 f1 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 04 10 00
40: 10 80 42 01 00 80 00 00 00 00 11 00 12 3c 12 08
-50: 42 00 11 50 60 b2 3c 00 00 00 00 01 00 00 00 00
+50: 43 00 11 70 60 b2 3c 00 00 00 40 01 00 00 00 00
60: 00 00 00 00 16 00 00 00 00 00 00 00 00 00 00 00
70: 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 05 90 00 00 00 00 00 00 00 00 00 00 00 00 00 00
# diff -u -w 8_inserted_Evolve_SpeedCard_HC-303SCX_with_NEC_uPD720200_rev3.txt 9_unplugged_Evolve_SpeedCard_HC-303SCX_with_NEC_uPD720200_rev3.txt
--- 8_inserted_Evolve_SpeedCard_HC-303SCX_with_NEC_uPD720200_rev3.txt 2012-05-04 15:44:58.000000000 +0200
+++ 9_unplugged_Evolve_SpeedCard_HC-303SCX_with_NEC_uPD720200_rev3.txt 2012-05-04 15:45:46.000000000 +0200
@@ -18,14 +18,14 @@
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #8, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot-
- LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
+ LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
+ LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #7, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
+ SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
@@ -49,7 +49,7 @@
20: c0 f6 c0 f7 01 f0 01 f1 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 04 10 00
40: 10 80 42 01 00 80 00 00 00 00 11 00 12 3c 12 08
-50: 43 00 11 70 60 b2 3c 00 00 00 40 01 00 00 00 00
+50: 42 00 11 50 60 b2 3c 00 00 00 00 01 00 00 00 00
60: 00 00 00 00 16 00 00 00 00 00 00 00 00 00 00 00
70: 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 05 90 00 00 00 00 00 00 00 00 00 00 00 00 00 00
# diff -u -w 9_unplugged_Evolve_SpeedCard_HC-303SCX_with_NEC_uPD720200_rev3.txt 9_inserted_Evolve_SpeedCard_HC-303SCX_with_NEC_uPD720200_rev3.txt
--- 9_unplugged_Evolve_SpeedCard_HC-303SCX_with_NEC_uPD720200_rev3.txt 2012-05-04 15:45:46.000000000 +0200
+++ 9_inserted_Evolve_SpeedCard_HC-303SCX_with_NEC_uPD720200_rev3.txt 2012-05-04 15:46:44.000000000 +0200
@@ -18,14 +18,14 @@
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #8, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot-
- LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
+ LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt+ ABWMgmt-
+ LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #7, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
+ SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
@@ -49,7 +49,7 @@
20: c0 f6 c0 f7 01 f0 01 f1 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 04 10 00
40: 10 80 42 01 00 80 00 00 00 00 11 00 12 3c 12 08
-50: 42 00 11 50 60 b2 3c 00 00 00 00 01 00 00 00 00
+50: 43 00 11 70 60 b2 3c 00 00 00 40 01 00 00 00 00
60: 00 00 00 00 16 00 00 00 00 00 00 00 00 00 00 00
70: 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 05 90 00 00 00 00 00 00 00 00 00 00 00 00 00 00
# diff -u -w 9_inserted_Evolve_SpeedCard_HC-303SCX_with_NEC_uPD720200_rev3.txt 10_unplugged_Evolve_SpeedCard_HC-303SCX_with_NEC_uPD720200_rev3.txt
--- 9_inserted_Evolve_SpeedCard_HC-303SCX_with_NEC_uPD720200_rev3.txt 2012-05-04 15:46:44.000000000 +0200
+++ 10_unplugged_Evolve_SpeedCard_HC-303SCX_with_NEC_uPD720200_rev3.txt 2012-05-04 15:47:34.000000000 +0200
@@ -18,14 +18,14 @@
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #8, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot-
- LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
+ LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
+ LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #7, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
+ SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
@@ -49,7 +49,7 @@
20: c0 f6 c0 f7 01 f0 01 f1 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 04 10 00
40: 10 80 42 01 00 80 00 00 00 00 11 00 12 3c 12 08
-50: 43 00 11 70 60 b2 3c 00 00 00 40 01 00 00 00 00
+50: 42 00 11 50 60 b2 3c 00 00 00 00 01 00 00 00 00
60: 00 00 00 00 16 00 00 00 00 00 00 00 00 00 00 00
70: 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 05 90 00 00 00 00 00 00 00 00 00 00 00 00 00 00
# diff -u -w 10_unplugged_Evolve_SpeedCard_HC-303SCX_with_NEC_uPD720200_rev3.txt 11_inserted_Zalman_ZM-EC302_U3.txt
--- 10_unplugged_Evolve_SpeedCard_HC-303SCX_with_NEC_uPD720200_rev3.txt 2012-05-04 15:47:34.000000000 +0200
+++ 11_inserted_Zalman_ZM-EC302_U3.txt 2012-05-04 15:48:43.000000000 +0200
@@ -18,14 +18,14 @@
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #8, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot-
- LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
+ LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt+ ABWMgmt-
+ LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #7, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
+ SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
@@ -49,7 +49,7 @@
20: c0 f6 c0 f7 01 f0 01 f1 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 04 10 00
40: 10 80 42 01 00 80 00 00 00 00 11 00 12 3c 12 08
-50: 42 00 11 50 60 b2 3c 00 00 00 00 01 00 00 00 00
+50: 43 00 11 70 60 b2 3c 00 00 00 40 01 00 00 00 00
60: 00 00 00 00 16 00 00 00 00 00 00 00 00 00 00 00
70: 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 05 90 00 00 00 00 00 00 00 00 00 00 00 00 00 00
# diff -u -w 11_inserted_Zalman_ZM-EC302_U3.txt 12_unplugged_Zalman_ZM-EC302_U3.txt
--- 11_inserted_Zalman_ZM-EC302_U3.txt 2012-05-04 15:48:43.000000000 +0200
+++ 12_unplugged_Zalman_ZM-EC302_U3.txt 2012-05-04 15:49:48.000000000 +0200
@@ -18,14 +18,14 @@
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #8, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot-
- LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
+ LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
+ LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #7, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
+ SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
@@ -49,7 +49,7 @@
20: c0 f6 c0 f7 01 f0 01 f1 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 04 10 00
40: 10 80 42 01 00 80 00 00 00 00 11 00 12 3c 12 08
-50: 43 00 11 70 60 b2 3c 00 00 00 40 01 00 00 00 00
+50: 42 00 11 50 60 b2 3c 00 00 00 00 01 00 00 00 00
60: 00 00 00 00 16 00 00 00 00 00 00 00 00 00 00 00
70: 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 05 90 00 00 00 00 00 00 00 00 00 00 00 00 00 00
# diff -u -w 12_unplugged_Zalman_ZM-EC302_U3.txt 13_re-inserted_Zalman_ZM-EC302_U3.txt
--- 12_unplugged_Zalman_ZM-EC302_U3.txt 2012-05-04 15:49:48.000000000 +0200
+++ 13_re-inserted_Zalman_ZM-EC302_U3.txt 2012-05-04 15:50:18.000000000 +0200
@@ -18,14 +18,14 @@
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #8, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot-
- LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
+ LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt+ ABWMgmt-
+ LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #7, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
+ SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
@@ -49,7 +49,7 @@
20: c0 f6 c0 f7 01 f0 01 f1 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 04 10 00
40: 10 80 42 01 00 80 00 00 00 00 11 00 12 3c 12 08
-50: 42 00 11 50 60 b2 3c 00 00 00 00 01 00 00 00 00
+50: 43 00 11 70 60 b2 3c 00 00 00 40 01 00 00 00 00
60: 00 00 00 00 16 00 00 00 00 00 00 00 00 00 00 00
70: 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 05 90 00 00 00 00 00 00 00 00 00 00 00 00 00 00
# diff -u -w 13_re-inserted_Zalman_ZM-EC302_U3.txt 14_unplugged_Zalman_ZM-EC302_U3.txt
--- 13_re-inserted_Zalman_ZM-EC302_U3.txt 2012-05-04 15:50:18.000000000 +0200
+++ 14_unplugged_Zalman_ZM-EC302_U3.txt 2012-05-04 15:52:31.000000000 +0200
@@ -18,14 +18,14 @@
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #8, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot-
- LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
+ LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
+ LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #7, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
+ SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
@@ -49,7 +49,7 @@
20: c0 f6 c0 f7 01 f0 01 f1 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 04 10 00
40: 10 80 42 01 00 80 00 00 00 00 11 00 12 3c 12 08
-50: 43 00 11 70 60 b2 3c 00 00 00 40 01 00 00 00 00
+50: 42 00 11 50 60 b2 3c 00 00 00 00 01 00 00 00 00
60: 00 00 00 00 16 00 00 00 00 00 00 00 00 00 00 00
70: 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 05 90 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Now, let's check whether the chip was in same state when card was out:
# diff -u -w 1_fresh_bootup.txt 2_unplugged_DeLock_unrecognized.txt
--- 1_fresh_bootup.txt 2012-05-04 15:25:23.000000000 +0200
+++ 2_unplugged_DeLock_unrecognized.txt 2012-05-04 15:34:12.000000000 +0200
@@ -16,17 +16,17 @@
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
- LnkCap: Port #8, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <16us
+ LnkCap: Port #8, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot-
- LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk-
+ LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
+ LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #7, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
- Changed: MRL- PresDet- LinkState-
+ Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
@@ -48,8 +48,8 @@
10: 00 00 00 00 00 00 00 00 00 11 16 00 c0 d0 00 00
20: c0 f6 c0 f7 01 f0 01 f1 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 04 10 00
-40: 10 80 42 01 00 80 00 00 00 00 10 00 12 4c 12 08
-50: 02 00 01 10 60 b2 3c 00 00 00 00 00 00 00 00 00
+40: 10 80 42 01 00 80 00 00 00 00 10 00 12 3c 12 08
+50: 40 00 11 50 60 b2 3c 00 00 00 00 01 00 00 00 00
60: 00 00 00 00 16 00 00 00 00 00 00 00 00 00 00 00
70: 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 05 90 00 00 00 00 00 00 00 00 00 00 00 00 00 00
# diff -u -w 2_unplugged_DeLock_unrecognized.txt 3_re-inserted_DeLock_again_unrecognized.txt
#
Yeah, it really slipped out at that moment.
# diff -u -w 3_re-inserted_DeLock_again_unrecognized.txt 5_unplugged_DeLock_unrecognized.txt
#
Good, no diff.
# diff -u -w 7_popped_out_Evolve_SpeedCard_HC-303SCX_with_NEC_uPD720200_rev3.txt 9_unplugged_Evolve_SpeedCard_HC-303SCX_with_NEC_uPD720200_rev3.txt
#
Good, empty slot is always in same state.
# diff -u -w 9_unplugged_Evolve_SpeedCard_HC-303SCX_with_NEC_uPD720200_rev3.txt 10_unplugged_Evolve_SpeedCard_HC-303SCX_with_NEC_uPD720200_rev3.txt
Also when I swap the vendor of the USB3.0 card.
# diff -u -w 10_unplugged_Evolve_SpeedCard_HC-303SCX_with_NEC_uPD720200_rev3.txt 12_unplugged_Zalman_ZM-EC302_U3.txt
# diff -u -w 10_unplugged_Evolve_SpeedCard_HC-303SCX_with_NEC_uPD720200_rev3.txt 14_unplugged_Zalman_ZM-EC302_U3.txt
#
So, empty slot ends up in a different state when I remove DeLock 61386 providin 2x eSATA ports.
It has 2 LEDs to signal data transfer. Both NEC-based cards have optional 5V/2A power input.
Only the one from Zalman has a power-on light (or in-slot?).
I followed up now with a FireWire Card which unplug was always detected. If I compare state of empty
card slot I get again a difference betwee the state left out after NEC-based card and this FireWire card.
# diff -u -w 10_unplugged_Evolve_SpeedCard_HC-303SCX_with_NEC_uPD720200_rev3.txt 16_unplugged_Axago-ECF-X1_FireWireCard.txt
--- 10_unplugged_Evolve_SpeedCard_HC-303SCX_with_NEC_uPD720200_rev3.txt 2012-05-04 15:47:34.000000000 +0200
+++ 16_unplugged_Axago-ECF-X1_FireWireCard.txt 2012-05-04 17:08:47.000000000 +0200
@@ -18,7 +18,7 @@
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #8, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot-
- LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
+ LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
@@ -49,7 +49,7 @@
20: c0 f6 c0 f7 01 f0 01 f1 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 04 10 00
40: 10 80 42 01 00 80 00 00 00 00 11 00 12 3c 12 08
-50: 42 00 11 50 60 b2 3c 00 00 00 00 01 00 00 00 00
+50: 40 00 11 50 60 b2 3c 00 00 00 00 01 00 00 00 00
60: 00 00 00 00 16 00 00 00 00 00 00 00 00 00 00 00
70: 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 05 90 00 00 00 00 00 00 00 00 00 00 00 00 00 00
# diff -u -w 16_unplugged_Axago-ECF-X1_FireWireCard.txt 18_unplugged_Axago-ECF-X1_FireWireCard.txt
#
# diff -u -w 1_fresh_bootup.txt 16_unplugged_Axago-ECF-X1_FireWireCard.txt
--- 1_fresh_bootup.txt 2012-05-04 15:25:23.000000000 +0200
+++ 16_unplugged_Axago-ECF-X1_FireWireCard.txt 2012-05-04 17:08:47.000000000 +0200
@@ -6,7 +6,7 @@
I/O behind bridge: 0000c000-0000dfff
Memory behind bridge: f6c00000-f7cfffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f10fffff
- Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
+ Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
@@ -15,18 +15,18 @@
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
- DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
- LnkCap: Port #8, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <16us
+ DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
+ LnkCap: Port #8, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot-
- LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk-
+ LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
+ LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #7, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
- Changed: MRL- PresDet- LinkState-
+ Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
@@ -45,11 +45,11 @@
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport
00: 86 80 1e 1c 07 00 10 00 b5 00 04 06 10 00 81 00
-10: 00 00 00 00 00 00 00 00 00 11 16 00 c0 d0 00 00
+10: 00 00 00 00 00 00 00 00 00 11 16 00 c0 d0 00 20
20: c0 f6 c0 f7 01 f0 01 f1 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 04 10 00
-40: 10 80 42 01 00 80 00 00 00 00 10 00 12 4c 12 08
-50: 02 00 01 10 60 b2 3c 00 00 00 00 00 00 00 00 00
+40: 10 80 42 01 00 80 00 00 00 00 11 00 12 3c 12 08
+50: 40 00 11 50 60 b2 3c 00 00 00 00 01 00 00 00 00
60: 00 00 00 00 16 00 00 00 00 00 00 00 00 00 00 00
70: 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 05 90 00 00 00 00 00 00 00 00 00 00 00 00 00 00
@@ -58,6 +58,6 @@
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 01 02 0b 00 00 02 80 11 c1 00 00 00 00
-e0: 00 03 00 00 00 00 00 00 01 00 00 00 00 00 00 00
+e0: 00 03 00 00 00 00 00 00 03 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 87 0f 06 08 00 00 00 00
Hmm, is the above difference caused by the fact the errors were left in because meanwhile I was using the NEC-based cards?
# diff -u -w 2_unplugged_DeLock_unrecognized.txt 16_unplugged_Axago-ECF-X1_FireWireCard.txt
--- 2_unplugged_DeLock_unrecognized.txt 2012-05-04 15:34:12.000000000 +0200
+++ 16_unplugged_Axago-ECF-X1_FireWireCard.txt 2012-05-04 17:08:47.000000000 +0200
@@ -6,7 +6,7 @@
I/O behind bridge: 0000c000-0000dfff
Memory behind bridge: f6c00000-f7cfffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f10fffff
- Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
+ Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
@@ -15,7 +15,7 @@
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
- DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
+ DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #8, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
@@ -45,10 +45,10 @@
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport
00: 86 80 1e 1c 07 00 10 00 b5 00 04 06 10 00 81 00
-10: 00 00 00 00 00 00 00 00 00 11 16 00 c0 d0 00 00
+10: 00 00 00 00 00 00 00 00 00 11 16 00 c0 d0 00 20
20: c0 f6 c0 f7 01 f0 01 f1 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 04 10 00
-40: 10 80 42 01 00 80 00 00 00 00 10 00 12 3c 12 08
+40: 10 80 42 01 00 80 00 00 00 00 11 00 12 3c 12 08
50: 40 00 11 50 60 b2 3c 00 00 00 00 01 00 00 00 00
60: 00 00 00 00 16 00 00 00 00 00 00 00 00 00 00 00
70: 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
@@ -58,6 +58,6 @@
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 01 02 0b 00 00 02 80 11 c1 00 00 00 00
-e0: 00 03 00 00 00 00 00 00 01 00 00 00 00 00 00 00
+e0: 00 03 00 00 00 00 00 00 03 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 87 0f 06 08 00 00 00 00
Seems so, even comparing with the state after DeLock removal there is still some difference left.
When I go and comapre states when a card was inserted I see only two differences, likely caused
by using the NEC-based cards some while ago.
# diff -u -w 1_inserted_DeLock_unrecognized.txt 15_inserted_Axago-ECF-X1_FireWireCard.txt
--- 1_inserted_DeLock_unrecognized.txt 2012-05-04 15:27:29.000000000 +0200
+++ 15_inserted_Axago-ECF-X1_FireWireCard.txt 2012-05-04 17:08:15.000000000 +0200
@@ -6,7 +6,7 @@
I/O behind bridge: 0000c000-0000dfff
Memory behind bridge: f6c00000-f7cfffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f10fffff
- Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
+ Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
@@ -15,7 +15,7 @@
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
- DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
+ DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #8, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
@@ -45,10 +45,10 @@
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport
00: 86 80 1e 1c 07 00 10 00 b5 00 04 06 10 00 81 00
-10: 00 00 00 00 00 00 00 00 00 11 16 00 c0 d0 00 00
+10: 00 00 00 00 00 00 00 00 00 11 16 00 c0 d0 00 20
20: c0 f6 c0 f7 01 f0 01 f1 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 04 10 00
-40: 10 80 42 01 00 80 00 00 00 00 10 00 12 3c 12 08
+40: 10 80 42 01 00 80 00 00 00 00 11 00 12 3c 12 08
50: 40 00 11 70 60 b2 3c 00 00 00 40 01 00 00 00 00
60: 00 00 00 00 16 00 00 00 00 00 00 00 00 00 00 00
70: 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
@@ -58,6 +58,6 @@
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 01 02 0b 00 00 02 80 11 c1 00 00 00 00
-e0: 00 03 00 00 00 00 00 00 01 00 00 00 00 00 00 00
+e0: 00 03 00 00 00 00 00 00 03 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 87 0f 06 08 00 00 00 00
So, does the card detection work? Yes, it does, like always. :-)
# diff -u -w 15_inserted_Axago-ECF-X1_FireWireCard.txt 16_unplugged_Axago-ECF-X1_FireWireCard.txt
--- 15_inserted_Axago-ECF-X1_FireWireCard.txt 2012-05-04 17:08:15.000000000 +0200
+++ 16_unplugged_Axago-ECF-X1_FireWireCard.txt 2012-05-04 17:08:47.000000000 +0200
@@ -20,12 +20,12 @@
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
+ LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #7, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
+ SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
@@ -49,7 +49,7 @@
20: c0 f6 c0 f7 01 f0 01 f1 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 04 10 00
40: 10 80 42 01 00 80 00 00 00 00 11 00 12 3c 12 08
-50: 40 00 11 70 60 b2 3c 00 00 00 40 01 00 00 00 00
+50: 40 00 11 50 60 b2 3c 00 00 00 00 01 00 00 00 00
60: 00 00 00 00 16 00 00 00 00 00 00 00 00 00 00 00
70: 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 05 90 00 00 00 00 00 00 00 00 00 00 00 00 00 00
#
Next, with the below comparison I think I just document that in the some time between
using the DeLock card and the FireWire card there were MAbort+ and CorrErr+ set (caused
by the NEC).
# diff -u -w 1_inserted_DeLock_unrecognized.txt 15_inserted_Axago-ECF-X1_FireWireCard.txt
--- 1_inserted_DeLock_unrecognized.txt 2012-05-04 15:27:29.000000000 +0200
+++ 15_inserted_Axago-ECF-X1_FireWireCard.txt 2012-05-04 17:08:15.000000000 +0200
@@ -6,7 +6,7 @@
I/O behind bridge: 0000c000-0000dfff
Memory behind bridge: f6c00000-f7cfffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f10fffff
- Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
+ Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
@@ -15,7 +15,7 @@
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
- DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
+ DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #8, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
@@ -45,10 +45,10 @@
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport
00: 86 80 1e 1c 07 00 10 00 b5 00 04 06 10 00 81 00
-10: 00 00 00 00 00 00 00 00 00 11 16 00 c0 d0 00 00
+10: 00 00 00 00 00 00 00 00 00 11 16 00 c0 d0 00 20
20: c0 f6 c0 f7 01 f0 01 f1 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 04 10 00
-40: 10 80 42 01 00 80 00 00 00 00 10 00 12 3c 12 08
+40: 10 80 42 01 00 80 00 00 00 00 11 00 12 3c 12 08
50: 40 00 11 70 60 b2 3c 00 00 00 40 01 00 00 00 00
60: 00 00 00 00 16 00 00 00 00 00 00 00 00 00 00 00
70: 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
@@ -58,6 +58,6 @@
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 01 02 0b 00 00 02 80 11 c1 00 00 00 00
-e0: 00 03 00 00 00 00 00 00 01 00 00 00 00 00 00 00
+e0: 00 03 00 00 00 00 00 00 03 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 87 0f 06 08 00 00 00 00
Finally, comparing states when NEC-based and FireWire card were in the slot. I think this is
interesting.
# diff -u -w 8_inserted_Evolve_SpeedCard_HC-303SCX_with_NEC_uPD720200_rev3.txt 15_inserted_Axago-ECF-X1_FireWireCard.txt
--- 8_inserted_Evolve_SpeedCard_HC-303SCX_with_NEC_uPD720200_rev3.txt 2012-05-04 15:44:58.000000000 +0200
+++ 15_inserted_Axago-ECF-X1_FireWireCard.txt 2012-05-04 17:08:15.000000000 +0200
@@ -18,7 +18,7 @@
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #8, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot-
- LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
+ LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
@@ -49,7 +49,7 @@
20: c0 f6 c0 f7 01 f0 01 f1 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 04 10 00
40: 10 80 42 01 00 80 00 00 00 00 11 00 12 3c 12 08
-50: 43 00 11 70 60 b2 3c 00 00 00 40 01 00 00 00 00
+50: 40 00 11 70 60 b2 3c 00 00 00 40 01 00 00 00 00
60: 00 00 00 00 16 00 00 00 00 00 00 00 00 00 00 00
70: 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 05 90 00 00 00 00 00 00 00 00 00 00 00 00 00 00
#
I would get same difference against teh other NEC-based card but so save output I rather show
that when the card is in a slot it is in same state.
# diff -u -w 8_inserted_Evolve_SpeedCard_HC-303SCX_with_NEC_uPD720200_rev3.txt 11_inserted_Zalman_ZM-EC302_U3.txt
#
First, if hardware does not report Changed PresDet+ and always says "PresDet-" linux could
keep do the comparisons on its own. Second, why does the NEC-chip "ignore?" the pcie_aspm=off
and mangles with the LnkCtl: ASPM? Unlike DeLock eSATA and Axago FireWire cards?
Or, does it make sense at all? ;-)
All of this was with plain 3.4-rc5.
Thanks,
Martin
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: 3.2.11: PCI Express card cannot be re-detected withing cca 60sec timeframe
2012-04-20 18:47 ` Yinghai Lu
2012-04-20 23:17 ` Sarah Sharp
2012-04-20 23:50 ` Martin Mokrejs
@ 2012-05-04 16:16 ` Martin Mokrejs
2 siblings, 0 replies; 55+ messages in thread
From: Martin Mokrejs @ 2012-05-04 16:16 UTC (permalink / raw)
To: Yinghai Lu; +Cc: linux-pci, Linux Kernel Mailing List
Hi Yinghai,
I went to re-test the acpiphp and pcie_aspm=off to be sure I really have to use pciehp.
Yinghai Lu wrote:
> On Fri, Apr 20, 2012 at 10:28 AM, Martin Mokrejs
> <mmokrejs@fold.natur.cuni.cz> wrote:
>>
>>
>> [30595.338466] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 108
>> [30595.338468] pciehp 0000:00:1c.7:pcie04: LinkState change
>> [30595.338471] pciehp 0000:00:1c.7:pcie04: lnk_status = 7011
>> [30595.338483] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
>> [30595.338486] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
>> [30595.338491] pciehp 0000:00:1c.7:pcie04: Surprise Removal
>> [30595.338525] pciehp 0000:00:1c.7:pcie04: check_link_active: lnk_status = 7011
>> [30595.439441] pciehp 0000:00:1c.7:pcie04: pciehp_check_link_status: lnk_status = 7011
>> [30595.439543] pci 0000:11:00.0: [1033:0194] type 00 class 0x0c0330
>> [30595.439597] pci 0000:11:00.0: reg 10: [mem 0x00000000-0x00001fff 64bit]
>> [30595.439840] pci 0000:11:00.0: PME# supported from D0 D3hot
>> [30595.459499] pci 0000:11:00.0: BAR 0: assigned [mem 0xf6c00000-0xf6c01fff 64bit]
>> [30595.459542] pcieport 0000:00:1c.7: PCI bridge to [bus 11-16]
>> [30595.459545] pcieport 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
>> [30595.459550] pcieport 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff]
>> [30595.459554] pcieport 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
>> [30595.459688] xhci_hcd 0000:11:00.0: enabling device (0100 -> 0102)
>> [30595.459894] xhci_hcd 0000:11:00.0: xHCI Host Controller
>> [30595.459900] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 5
>> [30595.460199] xhci_hcd 0000:11:00.0: irq 19, io mem 0xf6c00000
>> [30595.460306] xhci_hcd 0000:11:00.0: irq 54 for MSI/MSI-X
>> [30595.460310] xhci_hcd 0000:11:00.0: irq 55 for MSI/MSI-X
>> [30595.460314] xhci_hcd 0000:11:00.0: irq 56 for MSI/MSI-X
>> [30595.460318] xhci_hcd 0000:11:00.0: irq 57 for MSI/MSI-X
>> [30595.460321] xhci_hcd 0000:11:00.0: irq 58 for MSI/MSI-X
>> [30595.460472] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
>> [30595.460474] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>> [30595.460475] usb usb5: Product: xHCI Host Controller
>> [30595.460476] usb usb5: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
>> [30595.460477] usb usb5: SerialNumber: 0000:11:00.0
>> [30595.460569] xHCI xhci_add_endpoint called for root hub
>> [30595.460579] xHCI xhci_check_bandwidth called for root hub
>> [30595.460600] hub 5-0:1.0: USB hub found
>> [30595.460611] hub 5-0:1.0: 2 ports detected
>> [30595.460706] xhci_hcd 0000:11:00.0: xHCI Host Controller
>> [30595.460711] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 6
>> [30595.463431] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
>> [30595.463433] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>> [30595.463434] usb usb6: Product: xHCI Host Controller
>> [30595.463435] usb usb6: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
>> [30595.463437] usb usb6: SerialNumber: 0000:11:00.0
>> [30595.463506] xHCI xhci_add_endpoint called for root hub
>> [30595.463507] xHCI xhci_check_bandwidth called for root hub
>> [30595.463534] hub 6-0:1.0: USB hub found
>> [30595.463547] hub 6-0:1.0: 2 ports detected
>
> echo 1 > /sys/..../remove
>
>> [30607.046714] xhci_hcd 0000:11:00.0: remove, state 4
>> [30607.046719] usb usb6: USB disconnect, device number 1
>> [30607.046764] xHCI xhci_drop_endpoint called for root hub
>> [30607.046766] xHCI xhci_check_bandwidth called for root hub
>> [30607.065341] xhci_hcd 0000:11:00.0: USB bus 6 deregistered
>> [30607.065350] xhci_hcd 0000:11:00.0: remove, state 4
>> [30607.065353] usb usb5: USB disconnect, device number 1
>> [30607.065393] xHCI xhci_drop_endpoint called for root hub
>> [30607.065394] xHCI xhci_check_bandwidth called for root hub
>> [30607.065692] xhci_hcd 0000:11:00.0: USB bus 5 deregistered
>> [30607.065764] pci 0000:11:00.0: freeing pci_dev info
>
> physically remove that express card
>
>> [30616.630810] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 108
>> [30616.630813] pciehp 0000:00:1c.7:pcie04: LinkState change
>> [30616.630816] pciehp 0000:00:1c.7:pcie04: lnk_status = 5011
>> [30616.630817] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
>> [30616.630820] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
>> [30616.630858] pciehp 0000:00:1c.7:pcie04: Surprise Removal
>> [30616.630888] pciehp 0000:00:1c.7:pcie04: Disabling domain:bus:device=0000:11:00
>> [30616.630891] pciehp 0000:00:1c.7:pcie04: pciehp_unconfigure_device: domain:bus:dev = 0000:11:00
>
> physical add...
>
>> [30708.233725] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 108
>> [30708.233727] pciehp 0000:00:1c.7:pcie04: LinkState change
>> [30708.233738] pciehp 0000:00:1c.7:pcie04: lnk_status = 7011
>> [30708.233739] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
>> [30708.233742] pciehp 0000:00:1c.7:pcie04: Card present on Slot(7)
>> [30708.233781] pciehp 0000:00:1c.7:pcie04: Surprise Removal
>> [30708.233796] pciehp 0000:00:1c.7:pcie04: check_link_active: lnk_status = 7011
>> [30708.338477] pciehp 0000:00:1c.7:pcie04: pciehp_check_link_status: lnk_status = 7011
>> [30708.338581] pci 0000:11:00.0: [1033:0194] type 00 class 0x0c0330
>> [30708.338632] pci 0000:11:00.0: reg 10: [mem 0x00000000-0x00001fff 64bit]
>> [30708.338876] pci 0000:11:00.0: PME# supported from D0 D3hot
>> [30708.358538] pci 0000:11:00.0: BAR 0: assigned [mem 0xf6c00000-0xf6c01fff 64bit]
>> [30708.358575] pcieport 0000:00:1c.7: PCI bridge to [bus 11-16]
>> [30708.358588] pcieport 0000:00:1c.7: bridge window [io 0xc000-0xdfff]
>> [30708.358593] pcieport 0000:00:1c.7: bridge window [mem 0xf6c00000-0xf7cfffff]
>> [30708.358597] pcieport 0000:00:1c.7: bridge window [mem 0xf0000000-0xf10fffff 64bit pref]
>> [30708.358737] xhci_hcd 0000:11:00.0: enabling device (0100 -> 0102)
>> [30708.358791] xhci_hcd 0000:11:00.0: xHCI Host Controller
>> [30708.358799] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 5
>> [30708.359090] xhci_hcd 0000:11:00.0: irq 19, io mem 0xf6c00000
>> [30708.359192] xhci_hcd 0000:11:00.0: irq 54 for MSI/MSI-X
>> [30708.359196] xhci_hcd 0000:11:00.0: irq 55 for MSI/MSI-X
>> [30708.359199] xhci_hcd 0000:11:00.0: irq 56 for MSI/MSI-X
>> [30708.359203] xhci_hcd 0000:11:00.0: irq 57 for MSI/MSI-X
>> [30708.359207] xhci_hcd 0000:11:00.0: irq 58 for MSI/MSI-X
>> [30708.359357] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
>> [30708.359359] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>> [30708.359360] usb usb5: Product: xHCI Host Controller
>> [30708.359361] usb usb5: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
>> [30708.359363] usb usb5: SerialNumber: 0000:11:00.0
>> [30708.359453] xHCI xhci_add_endpoint called for root hub
>> [30708.359456] xHCI xhci_check_bandwidth called for root hub
>> [30708.359496] hub 5-0:1.0: USB hub found
>> [30708.359509] hub 5-0:1.0: 2 ports detected
>> [30708.359571] xhci_hcd 0000:11:00.0: xHCI Host Controller
>> [30708.359574] xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 6
>> [30708.362332] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
>> [30708.362335] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>> [30708.362337] usb usb6: Product: xHCI Host Controller
>> [30708.362338] usb usb6: Manufacturer: Linux 3.4.0-rc3-default xhci_hcd
>> [30708.362340] usb usb6: SerialNumber: 0000:11:00.0
>> [30708.362443] xHCI xhci_add_endpoint called for root hub
>> [30708.362445] xHCI xhci_check_bandwidth called for root hub
>> [30708.362472] hub 6-0:1.0: USB hub found
>> [30708.362490] hub 6-0:1.0: 2 ports detected
>
> echo 1 /sys/.../remove
>
>> [30716.380693] xhci_hcd 0000:11:00.0: remove, state 4
>> [30716.380699] usb usb6: USB disconnect, device number 1
>> [30716.380752] xHCI xhci_drop_endpoint called for root hub
>> [30716.380754] xHCI xhci_check_bandwidth called for root hub
>> [30716.400795] xhci_hcd 0000:11:00.0: USB bus 6 deregistered
>> [30716.400803] xhci_hcd 0000:11:00.0: remove, state 4
>> [30716.400807] usb usb5: USB disconnect, device number 1
>> [30716.400846] xHCI xhci_drop_endpoint called for root hub
>> [30716.400848] xHCI xhci_check_bandwidth called for root hub
>> [30716.401134] xhci_hcd 0000:11:00.0: USB bus 5 deregistered
>> [30716.401207] pci 0000:11:00.0: freeing pci_dev info
>
> physically remove
>
>> [30720.175637] pciehp 0000:00:1c.7:pcie04: pcie_isr: intr_loc 108
>> [30720.175639] pciehp 0000:00:1c.7:pcie04: LinkState change
>> [30720.175643] pciehp 0000:00:1c.7:pcie04: lnk_status = 5011
>> [30720.175644] pciehp 0000:00:1c.7:pcie04: Presence/Notify input change
>> [30720.175648] pciehp 0000:00:1c.7:pcie04: Card not present on Slot(7)
>> [30720.175687] pciehp 0000:00:1c.7:pcie04: Surprise Removal
>> [30720.175718] pciehp 0000:00:1c.7:pcie04: Disabling domain:bus:device=0000:11:00
>> [30720.175721] pciehp 0000:00:1c.7:pcie04: pciehp_unconfigure_device: domain:bus:dev = 0000:11:00
>>
>
> So the USB host control driver xhci put that 11:00.0 in strange power state.
>
> please try to boot the system with pcie_aspm=off
>
> and don't use echo 1 before physically removing the expresscard.
Here I just want to show that pcie_aspm=off is really interpreted and that acpiphp brings
me nothing?
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_FAKE is not set
CONFIG_HOTPLUG_PCI_ACPI=y
# CONFIG_HOTPLUG_PCI_ACPI_IBM is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set
@@ -153,7 +153,8 @@
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on.
Policy zone: Normal
-Kernel command line: root=/dev/sda5 pciehp.pciehp_debug=1 console=ttyUSB0,115200n8 console=tty0 log_buf_len=409600
+Kernel command line: root=/dev/sda5 pciehp.pciehp_debug=1 console=ttyUSB0,115200n8 console=tty0 log_buf_len=409600 pcie_aspm=off
+PCIe ASPM is disabled
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
@@ -406,8 +407,7 @@
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP08._PRT]
-pci0000:00: Requesting ACPI _OSC control (0x1d)
-pci0000:00: ACPI _OSC control (0x19) granted
+pci0000:00: Unable to request _OSC control (_OSC support mask:
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5
@@ -669,39 +669,12 @@
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
-pcieport 0000:00:1c.7: irq 42 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
-pciehp 0000:00:1c.7:pcie04: Hotplug Controller:
-pciehp 0000:00:1c.7:pcie04: Seg/Bus/Dev/Func/IRQ : 0000:00:1c.7 IRQ 42
-pciehp 0000:00:1c.7:pcie04: Vendor ID : 0x8086
-pciehp 0000:00:1c.7:pcie04: Device ID : 0x1c1e
-pciehp 0000:00:1c.7:pcie04: Subsystem ID : 0x04b3
-pciehp 0000:00:1c.7:pcie04: Subsystem Vendor ID : 0x1028
-pciehp 0000:00:1c.7:pcie04: PCIe Cap offset : 0x40
-pciehp 0000:00:1c.7:pcie04: PCI resource [13] : [io 0xc000-0xdfff]
-pciehp 0000:00:1c.7:pcie04: PCI resource [14] : [mem 0xf6c00000-0xf7cfffff]
-pciehp 0000:00:1c.7:pcie04: PCI resource [15] : [mem 0xf0000000-0xf10fffff 64bit
-pciehp 0000:00:1c.7:pcie04: Slot Capabilities : 0x003cb260
-pciehp 0000:00:1c.7:pcie04: Physical Slot Number : 7
-pciehp 0000:00:1c.7:pcie04: Attention Button : no
-pciehp 0000:00:1c.7:pcie04: Power Controller : no
-pciehp 0000:00:1c.7:pcie04: MRL Sensor : no
-pciehp 0000:00:1c.7:pcie04: Attention Indicator : no
-pciehp 0000:00:1c.7:pcie04: Power Indicator : no
-pciehp 0000:00:1c.7:pcie04: Hot-Plug Surprise : yes
-pciehp 0000:00:1c.7:pcie04: EMI Present : no
-pciehp 0000:00:1c.7:pcie04: Command Completed : no
-pciehp 0000:00:1c.7:pcie04: Slot Status : 0x0000
-pciehp 0000:00:1c.7:pcie04: Slot Control : 0x0000
-pciehp 0000:00:1c.7:pcie04: Link Active Reporting supported
-pciehp 0000:00:1c.7:pcie04: HPC vendor_id 8086 device_id 1c1e ss_vid 1028
-pciehp 0000:00:1c.7:pcie04: Registering domain:bus:dev=0000:11:00 sun=7
-pci_bus 0000:11: dev 00, created physical slot 7
-pciehp 0000:00:1c.7:pcie04: pciehp_get_power_status: SLOTCTRL 58 value read 28
-pciehp 0000:00:1c.7:pcie04: service driver pciehp loaded
pciehp: pcie_port_service_register = 0
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
+pci_bus 0000:11: dev 00, created physical slot 1
+acpiphp: Slot [1] registered
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x2A
intel_idle: lapic_timer_reliable_states 0xffffffff
In other words, when I use pcie_aspm=off and have CONFIG_HOTPLUG_PCI_ACPI=y my acpiphp picks up
but express card does not "work"?
The only way to have it working for me is to avoid pcie_aspm=off altogether and not bother about
CONFIG_HOTPLUG_PCI_ACPI value. What do you recommend me?
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_FAKE is not set
# CONFIG_HOTPLUG_PCI_ACPI is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set
--- 8_no__CONFIG_HOTPLUG_PCI_ACPI.txt 2012-05-04 14:55:58.000000000 +0200
+++ 9_no__CONFIG_HOTPLUG_PCI_ACPI.txt 2012-05-04 14:56:14.000000000 +0200
@@ -1,6 +1,6 @@
Initializing cgroup subsys cpu
Linux version 3.4.0-rc5-default (root@vostro) (gcc version 4.5.3 (Gentoo 4.5.3-r2
-Command line: root=/dev/sda5 pciehp.pciehp_debug=1 console=ttyUSB0,115200n8 console=tty0 log_buf_len=409600
+Command line: root=/dev/sda5 pciehp.pciehp_debug=1 console=ttyUSB0,115200n8 console=tty0 log_buf_len=409600 pcie_aspm=off
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009d400 (usable)
BIOS-e820: 000000000009d400 - 00000000000a0000 (reserved)
@@ -153,7 +153,8 @@
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on.
Policy zone: Normal
-Kernel command line: root=/dev/sda5 pciehp.pciehp_debug=1 console=ttyUSB0,115200n8 console=tty0 log_buf_len=409600
+Kernel command line: root=/dev/sda5 pciehp.pciehp_debug=1 console=ttyUSB0,115200n8 console=tty0 log_buf_len=409600 pcie_aspm=off
+PCIe ASPM is disabled
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
@@ -406,8 +407,7 @@
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP08._PRT]
-pci0000:00: Requesting ACPI _OSC control (0x1d)
-pci0000:00: ACPI _OSC control (0x19) granted
+pci0000:00: Unable to request _OSC control (_OSC support mask:
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5
@@ -669,36 +669,7 @@
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
-pcieport 0000:00:1c.7: irq 42 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
-pciehp 0000:00:1c.7:pcie04: Hotplug Controller:
-pciehp 0000:00:1c.7:pcie04: Seg/Bus/Dev/Func/IRQ : 0000:00:1c.7 IRQ 42
-pciehp 0000:00:1c.7:pcie04: Vendor ID : 0x8086
-pciehp 0000:00:1c.7:pcie04: Device ID : 0x1c1e
-pciehp 0000:00:1c.7:pcie04: Subsystem ID : 0x04b3
-pciehp 0000:00:1c.7:pcie04: Subsystem Vendor ID : 0x1028
-pciehp 0000:00:1c.7:pcie04: PCIe Cap offset : 0x40
-pciehp 0000:00:1c.7:pcie04: PCI resource [13] : [io 0xc000-0xdfff]
-pciehp 0000:00:1c.7:pcie04: PCI resource [14] : [mem 0xf6c00000-0xf7cfffff]
-pciehp 0000:00:1c.7:pcie04: PCI resource [15] : [mem 0xf0000000-0xf10fffff 64bit
-pciehp 0000:00:1c.7:pcie04: Slot Capabilities : 0x003cb260
-pciehp 0000:00:1c.7:pcie04: Physical Slot Number : 7
-pciehp 0000:00:1c.7:pcie04: Attention Button : no
-pciehp 0000:00:1c.7:pcie04: Power Controller : no
-pciehp 0000:00:1c.7:pcie04: MRL Sensor : no
-pciehp 0000:00:1c.7:pcie04: Attention Indicator : no
-pciehp 0000:00:1c.7:pcie04: Power Indicator : no
-pciehp 0000:00:1c.7:pcie04: Hot-Plug Surprise : yes
-pciehp 0000:00:1c.7:pcie04: EMI Present : no
-pciehp 0000:00:1c.7:pcie04: Command Completed : no
-pciehp 0000:00:1c.7:pcie04: Slot Status : 0x0000
-pciehp 0000:00:1c.7:pcie04: Slot Control : 0x0000
-pciehp 0000:00:1c.7:pcie04: Link Active Reporting supported
-pciehp 0000:00:1c.7:pcie04: HPC vendor_id 8086 device_id 1c1e ss_vid 1028
-pciehp 0000:00:1c.7:pcie04: Registering domain:bus:dev=0000:11:00 sun=7
-pci_bus 0000:11: dev 00, created physical slot 7
-pciehp 0000:00:1c.7:pcie04: pciehp_get_power_status: SLOTCTRL 58 value read 28
-pciehp 0000:00:1c.7:pcie04: service driver pciehp loaded
pciehp: pcie_port_service_register = 0
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x21120
Just to make sure there is no way to use acpiphp on my system. Or could the "Unable to request _OSC control"
thing be fixed somehow?
Thanks,
Martin
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: 3.2.11: PCI Express card cannot be re-detected withing cca 60sec timeframe
2012-05-04 15:58 ` Martin Mokrejs
@ 2012-05-04 20:43 ` Martin Mokrejs
0 siblings, 0 replies; 55+ messages in thread
From: Martin Mokrejs @ 2012-05-04 20:43 UTC (permalink / raw)
Cc: Yinghai Lu, linux-pci, Linux Kernel Mailing List
[-- Attachment #1: Type: text/plain, Size: 27622 bytes --]
Here I am showing that weird thing happen when ASPM is enabled. There I can much more differences
between the cards.
When DeLock card slips out during insert I get:
- Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR+ <PERR-
+ Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
When Evolve card with NEC slips out, I get same like when they were unplugged intentionally.
# diff -u -w 7_unplugged_DeLock.txt 8_Evolve_slipped_out.txt (or unplugged Evolve/Zalman)
--- 7_unplugged_DeLock.txt 2012-05-04 21:30:40.000000000 +0200
+++ 8_Evolve_slipped_out.txt 2012-05-04 21:31:36.000000000 +0200
@@ -6,7 +6,7 @@
I/O behind bridge: 0000c000-0000dfff
Memory behind bridge: f6c00000-f7cfffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f10fffff
- Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
+ Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
@@ -18,14 +18,14 @@
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #8, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot-
- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
+ LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt+ ABWMgmt-
+ LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #7, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq+ LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
+ SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
@@ -45,11 +45,11 @@
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport
00: 86 80 1e 1c 07 04 10 00 b5 00 04 06 10 00 81 00
-10: 00 00 00 00 00 00 00 00 00 11 16 00 c0 d0 00 20
+10: 00 00 00 00 00 00 00 00 00 11 16 00 c0 d0 00 00
20: c0 f6 c0 f7 01 f0 01 f1 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 04 10 00
40: 10 80 42 01 00 80 00 00 00 00 11 00 12 3c 12 08
-50: 40 00 11 50 60 b2 3c 00 28 00 00 01 00 00 00 00
+50: 43 00 11 70 60 b2 3c 00 28 00 40 01 00 00 00 00
60: 00 00 00 00 16 00 00 00 00 00 00 00 00 00 00 00
70: 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 05 90 01 00 18 03 e0 fe 00 00 00 00 00 00 00 00
@@ -58,6 +58,6 @@
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 01 02 0b 00 00 02 80 11 c1 00 00 00 00
-e0: 00 03 00 00 00 00 00 00 01 00 00 00 00 00 00 00
+e0: 00 03 00 00 00 00 00 00 03 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 87 0f 06 08 00 00 00 00
#
# diff -u -w 7_unplugged_DeLock.txt 10_unplugged_Evolve.txt
--- 7_unplugged_DeLock.txt 2012-05-04 21:30:40.000000000 +0200
+++ 10_unplugged_Evolve.txt 2012-05-04 21:32:12.000000000 +0200
@@ -6,7 +6,7 @@
I/O behind bridge: 0000c000-0000dfff
Memory behind bridge: f6c00000-f7cfffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f10fffff
- Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
+ Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
@@ -18,14 +18,14 @@
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #8, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot-
- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
+ LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt+ ABWMgmt-
+ LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #7, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq+ LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
+ SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
@@ -45,11 +45,11 @@
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport
00: 86 80 1e 1c 07 04 10 00 b5 00 04 06 10 00 81 00
-10: 00 00 00 00 00 00 00 00 00 11 16 00 c0 d0 00 20
+10: 00 00 00 00 00 00 00 00 00 11 16 00 c0 d0 00 00
20: c0 f6 c0 f7 01 f0 01 f1 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 04 10 00
40: 10 80 42 01 00 80 00 00 00 00 11 00 12 3c 12 08
-50: 40 00 11 50 60 b2 3c 00 28 00 00 01 00 00 00 00
+50: 43 00 11 70 60 b2 3c 00 28 00 40 01 00 00 00 00
60: 00 00 00 00 16 00 00 00 00 00 00 00 00 00 00 00
70: 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 05 90 01 00 18 03 e0 fe 00 00 00 00 00 00 00 00
@@ -58,6 +58,6 @@
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 01 02 0b 00 00 02 80 11 c1 00 00 00 00
-e0: 00 03 00 00 00 00 00 00 01 00 00 00 00 00 00 00
+e0: 00 03 00 00 00 00 00 00 03 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 87 0f 06 08 00 00 00 00
#
The bad thing is that when the NEC-based card slips out or is removed, *when pcie_aspm is on*,
it always leaves the slot in PresDet+ (on the SltSta: line). On the "Changed:" line it stays
as PresDet- as always. This is the real issue?
Evolve and Zalman inserted or unplugged states are same. Also when cards slips out or is intentionally
removed results in same, bad state.
It seems to me another difference is that in unplugged state of eSATA and FireWire cards
leave the slot in either <MAbort+/- <SERR- and <SERR+ but those based on NEC alway leave <MAbort- <SERR-.
Finally, unplugging NEC-bnased cards does not clear DLActive+ to DLActive-.
# diff -u -w 2_card_slipped_out.txt 7_unplugged_DeLock.txt
--- 2_card_slipped_out.txt 2012-05-04 21:25:41.000000000 +0200
+++ 7_unplugged_DeLock.txt 2012-05-04 21:30:40.000000000 +0200
@@ -6,7 +6,7 @@
I/O behind bridge: 0000c000-0000dfff
Memory behind bridge: f6c00000-f7cfffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f10fffff
- Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR+ <PERR-
+ Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
@@ -45,7 +45,7 @@
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport
00: 86 80 1e 1c 07 04 10 00 b5 00 04 06 10 00 81 00
-10: 00 00 00 00 00 00 00 00 00 11 16 00 c0 d0 00 60
+10: 00 00 00 00 00 00 00 00 00 11 16 00 c0 d0 00 20
20: c0 f6 c0 f7 01 f0 01 f1 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 04 10 00
40: 10 80 42 01 00 80 00 00 00 00 11 00 12 3c 12 08
#
# diff -u -w 8_Evolve_slipped_out.txt 17_unplugged_Axago_firewire.txt
--- 8_Evolve_slipped_out.txt 2012-05-04 21:31:36.000000000 +0200
+++ 17_unplugged_Axago_firewire.txt 2012-05-04 21:34:55.000000000 +0200
@@ -6,7 +6,7 @@
I/O behind bridge: 0000c000-0000dfff
Memory behind bridge: f6c00000-f7cfffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f10fffff
- Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
+ Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
@@ -16,16 +16,16 @@
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
- LnkCap: Port #8, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <16us
+ LnkCap: Port #8, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot-
- LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
+ LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
+ LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #7, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq+ LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
+ SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
@@ -45,11 +45,11 @@
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport
00: 86 80 1e 1c 07 04 10 00 b5 00 04 06 10 00 81 00
-10: 00 00 00 00 00 00 00 00 00 11 16 00 c0 d0 00 00
+10: 00 00 00 00 00 00 00 00 00 11 16 00 c0 d0 00 20
20: c0 f6 c0 f7 01 f0 01 f1 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 04 10 00
-40: 10 80 42 01 00 80 00 00 00 00 11 00 12 3c 12 08
-50: 43 00 11 70 60 b2 3c 00 28 00 40 01 00 00 00 00
+40: 10 80 42 01 00 80 00 00 00 00 11 00 12 4c 12 08
+50: 00 00 11 50 60 b2 3c 00 28 00 00 01 00 00 00 00
60: 00 00 00 00 16 00 00 00 00 00 00 00 00 00 00 00
70: 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 05 90 01 00 18 03 e0 fe 00 00 00 00 00 00 00 00
#
The FireWire card leaves ASPM disables like sata_sil24 is forcing over the eSATA card from DeLock.
Like with pcie_aspm=off, NEC fiddles with
- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
+ LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
while at least the eSATA card based on Sil3132 (sata_sil24) says:
[ 1417.874596] pci 0000:11:00.0: [1095:3132] type 00 class 0x018000
[ 1417.874864] pci 0000:11:00.0: supports D1 D2
[ 1417.874890] pci 0000:11:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
So do those NEC cards ignore the pcie_aspm=off parameter?
Here is the full diff:
# diff -u -w 7_unplugged_DeLock.txt 10_unplugged_Evolve.txt
--- 7_unplugged_DeLock.txt 2012-05-04 21:30:40.000000000 +0200
+++ 10_unplugged_Evolve.txt 2012-05-04 21:32:12.000000000 +0200
@@ -6,7 +6,7 @@
I/O behind bridge: 0000c000-0000dfff
Memory behind bridge: f6c00000-f7cfffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f10fffff
- Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
+ Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
@@ -18,14 +18,14 @@
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #8, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot-
- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
+ LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt+ ABWMgmt-
+ LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #7, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq+ LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
+ SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
@@ -45,11 +45,11 @@
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport
00: 86 80 1e 1c 07 04 10 00 b5 00 04 06 10 00 81 00
-10: 00 00 00 00 00 00 00 00 00 11 16 00 c0 d0 00 20
+10: 00 00 00 00 00 00 00 00 00 11 16 00 c0 d0 00 00
20: c0 f6 c0 f7 01 f0 01 f1 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 04 10 00
40: 10 80 42 01 00 80 00 00 00 00 11 00 12 3c 12 08
-50: 40 00 11 50 60 b2 3c 00 28 00 00 01 00 00 00 00
+50: 43 00 11 70 60 b2 3c 00 28 00 40 01 00 00 00 00
60: 00 00 00 00 16 00 00 00 00 00 00 00 00 00 00 00
70: 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 05 90 01 00 18 03 e0 fe 00 00 00 00 00 00 00 00
@@ -58,6 +58,6 @@
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 01 02 0b 00 00 02 80 11 c1 00 00 00 00
-e0: 00 03 00 00 00 00 00 00 01 00 00 00 00 00 00 00
+e0: 00 03 00 00 00 00 00 00 03 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 87 0f 06 08 00 00 00 00
#
Finally to say, when ASPM is not forbidden in kernel by pcie_aspm=off, there is not much difference
between inserted states. But, there is a difference in the unplugged slot state:
# diff -u -w 6_re-inserted-DeLock.txt 9_inserted-Evolve.txt
--- 6_re-inserted-DeLock.txt 2012-05-04 21:30:27.000000000 +0200
+++ 9_inserted-Evolve.txt 2012-05-04 21:31:57.000000000 +0200
@@ -18,7 +18,7 @@
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #8, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot-
- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
+ LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
@@ -49,7 +49,7 @@
20: c0 f6 c0 f7 01 f0 01 f1 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 04 10 00
40: 10 80 42 01 00 80 00 00 00 00 11 00 12 3c 12 08
-50: 40 00 11 70 60 b2 3c 00 28 00 40 01 00 00 00 00
+50: 43 00 11 70 60 b2 3c 00 28 00 40 01 00 00 00 00
60: 00 00 00 00 16 00 00 00 00 00 00 00 00 00 00 00
70: 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 05 90 01 00 18 03 e0 fe 00 00 00 00 00 00 00 00
@@ -58,6 +58,6 @@
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 01 02 0b 00 00 02 80 11 c1 00 00 00 00
-e0: 00 03 00 00 00 00 00 00 01 00 00 00 00 00 00 00
+e0: 00 03 00 00 00 00 00 00 03 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 87 0f 06 08 00 00 00 00
# diff -u -w 7_unplugged_DeLock.txt 10_unplugged_Evolve.txt
--- 7_unplugged_DeLock.txt 2012-05-04 21:30:40.000000000 +0200
+++ 10_unplugged_Evolve.txt 2012-05-04 21:32:12.000000000 +0200
@@ -6,7 +6,7 @@
I/O behind bridge: 0000c000-0000dfff
Memory behind bridge: f6c00000-f7cfffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f10fffff
- Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
+ Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
@@ -18,14 +18,14 @@
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #8, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot-
- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
+ LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt+ ABWMgmt-
+ LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #7, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq+ LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
+ SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
@@ -45,11 +45,11 @@
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport
00: 86 80 1e 1c 07 04 10 00 b5 00 04 06 10 00 81 00
-10: 00 00 00 00 00 00 00 00 00 11 16 00 c0 d0 00 20
+10: 00 00 00 00 00 00 00 00 00 11 16 00 c0 d0 00 00
20: c0 f6 c0 f7 01 f0 01 f1 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 04 10 00
40: 10 80 42 01 00 80 00 00 00 00 11 00 12 3c 12 08
-50: 40 00 11 50 60 b2 3c 00 28 00 00 01 00 00 00 00
+50: 43 00 11 70 60 b2 3c 00 28 00 40 01 00 00 00 00
60: 00 00 00 00 16 00 00 00 00 00 00 00 00 00 00 00
70: 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 05 90 01 00 18 03 e0 fe 00 00 00 00 00 00 00 00
@@ -58,6 +58,6 @@
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 01 02 0b 00 00 02 80 11 c1 00 00 00 00
-e0: 00 03 00 00 00 00 00 00 01 00 00 00 00 00 00 00
+e0: 00 03 00 00 00 00 00 00 03 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 87 0f 06 08 00 00 00 00
#
# diff -u -w 10_unplugged_Evolve.txt 12_unplugged_Zalman.txt
# diff -u -w 10_unplugged_Evolve.txt 15_unplugged_Axago_firewire.txt
--- 10_unplugged_Evolve.txt 2012-05-04 21:32:12.000000000 +0200
+++ 15_unplugged_Axago_firewire.txt 2012-05-04 21:34:28.000000000 +0200
@@ -6,7 +6,7 @@
I/O behind bridge: 0000c000-0000dfff
Memory behind bridge: f6c00000-f7cfffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f10fffff
- Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
+ Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
@@ -16,16 +16,16 @@
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
- LnkCap: Port #8, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <16us
+ LnkCap: Port #8, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot-
- LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
+ LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
+ LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #7, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq+ LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
+ SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
@@ -45,11 +45,11 @@
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport
00: 86 80 1e 1c 07 04 10 00 b5 00 04 06 10 00 81 00
-10: 00 00 00 00 00 00 00 00 00 11 16 00 c0 d0 00 00
+10: 00 00 00 00 00 00 00 00 00 11 16 00 c0 d0 00 20
20: c0 f6 c0 f7 01 f0 01 f1 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 04 10 00
-40: 10 80 42 01 00 80 00 00 00 00 11 00 12 3c 12 08
-50: 43 00 11 70 60 b2 3c 00 28 00 40 01 00 00 00 00
+40: 10 80 42 01 00 80 00 00 00 00 11 00 12 4c 12 08
+50: 00 00 11 50 60 b2 3c 00 28 00 00 01 00 00 00 00
60: 00 00 00 00 16 00 00 00 00 00 00 00 00 00 00 00
70: 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 05 90 01 00 18 03 e0 fe 00 00 00 00 00 00 00 00
# diff -u -w 15_unplugged_Axago_firewire.txt 17_unplugged_Axago_firewire.txt
#
The one below I cannot comment, I do not what is it about at all:
# diff -u -w 3_re-inserted-DeLock.txt 14_inserted_Axago_firewire.txt
--- 3_re-inserted-DeLock.txt 2012-05-04 21:29:11.000000000 +0200
+++ 14_inserted_Axago_firewire.txt 2012-05-04 21:34:13.000000000 +0200
@@ -16,9 +16,9 @@
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
- LnkCap: Port #8, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <16us
+ LnkCap: Port #8, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot-
- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
+ LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
@@ -48,8 +48,8 @@
10: 00 00 00 00 00 00 00 00 00 11 16 00 c0 d0 00 00
20: c0 f6 c0 f7 01 f0 01 f1 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 04 10 00
-40: 10 80 42 01 00 80 00 00 00 00 11 00 12 3c 12 08
-50: 40 00 11 70 60 b2 3c 00 28 00 40 01 00 00 00 00
+40: 10 80 42 01 00 80 00 00 00 00 11 00 12 4c 12 08
+50: 00 00 11 70 60 b2 3c 00 28 00 40 01 00 00 00 00
60: 00 00 00 00 16 00 00 00 00 00 00 00 00 00 00 00
70: 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 05 90 01 00 18 03 e0 fe 00 00 00 00 00 00 00 00
@@ -58,6 +58,6 @@
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 01 02 0b 00 00 02 80 11 c1 00 00 00 00
-e0: 00 03 00 00 00 00 00 00 01 00 00 00 00 00 00 00
+e0: 00 03 00 00 00 00 00 00 03 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 87 0f 06 08 00 00 00 00
All of the above was done with:
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
CONFIG_PCIEAER=y
CONFIG_PCIE_ECRC=y
# CONFIG_PCIEAER_INJECT is not set
CONFIG_PCIEASPM=y
CONFIG_PCIEASPM_DEBUG=y
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_DEBUG=y
CONFIG_PCI_REALLOC_ENABLE_AUTO=y
CONFIG_PCI_STUB=y
CONFIG_HT_IRQ=y
CONFIG_PCI_ATS=y
CONFIG_PCI_IOV=y
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
CONFIG_PCI_IOAPIC=y
CONFIG_PCI_LABEL=y
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y
# CONFIG_PCCARD is not set
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_FAKE is not set
# CONFIG_HOTPLUG_PCI_ACPI is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set
# CONFIG_RAPIDIO is not set
and with no extra disabling of ASPM on the kernel commandline (what was in previous email).
I think I did quite some testing. Would somebody please step in and say what is BIOS/hardware related
and what is a linux software issue?
Thanks,
Martin
[-- Attachment #2: 1_fresh_after_bootup.txt --]
[-- Type: text/plain, Size: 3715 bytes --]
00:1c.7 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=11, subordinate=16, sec-latency=0
I/O behind bridge: 0000c000-0000dfff
Memory behind bridge: f6c00000-f7cfffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f10fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #8, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #7, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq+ LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee00318 Data: 0000
Capabilities: [90] Subsystem: Dell Device 04b3
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport
00: 86 80 1e 1c 07 04 10 00 b5 00 04 06 10 00 81 00
10: 00 00 00 00 00 00 00 00 00 11 16 00 c0 d0 00 00
20: c0 f6 c0 f7 01 f0 01 f1 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 04 10 00
40: 10 80 42 01 00 80 00 00 00 00 10 00 12 4c 12 08
50: 02 00 01 10 60 b2 3c 00 28 00 00 00 00 00 00 00
60: 00 00 00 00 16 00 00 00 00 00 00 00 00 00 00 00
70: 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 05 90 01 00 18 03 e0 fe 00 00 00 00 00 00 00 00
90: 0d a0 00 00 28 10 b3 04 00 00 00 00 00 00 00 00
a0: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 01 02 0b 00 00 02 80 11 c1 00 00 00 00
e0: 00 03 00 00 00 00 00 00 01 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 87 0f 06 08 00 00 00 00
[-- Attachment #3: 2_card_slipped_out.txt --]
[-- Type: text/plain, Size: 3715 bytes --]
00:1c.7 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=11, subordinate=16, sec-latency=0
I/O behind bridge: 0000c000-0000dfff
Memory behind bridge: f6c00000-f7cfffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f10fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR+ <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #8, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #7, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq+ LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee00318 Data: 0000
Capabilities: [90] Subsystem: Dell Device 04b3
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport
00: 86 80 1e 1c 07 04 10 00 b5 00 04 06 10 00 81 00
10: 00 00 00 00 00 00 00 00 00 11 16 00 c0 d0 00 60
20: c0 f6 c0 f7 01 f0 01 f1 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 04 10 00
40: 10 80 42 01 00 80 00 00 00 00 11 00 12 3c 12 08
50: 40 00 11 50 60 b2 3c 00 28 00 00 01 00 00 00 00
60: 00 00 00 00 16 00 00 00 00 00 00 00 00 00 00 00
70: 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 05 90 01 00 18 03 e0 fe 00 00 00 00 00 00 00 00
90: 0d a0 00 00 28 10 b3 04 00 00 00 00 00 00 00 00
a0: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 01 02 0b 00 00 02 80 11 c1 00 00 00 00
e0: 00 03 00 00 00 00 00 00 01 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 87 0f 06 08 00 00 00 00
[-- Attachment #4: 3_re-inserted-DeLock.txt --]
[-- Type: text/plain, Size: 3715 bytes --]
00:1c.7 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=11, subordinate=16, sec-latency=0
I/O behind bridge: 0000c000-0000dfff
Memory behind bridge: f6c00000-f7cfffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f10fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #8, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #7, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq+ LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee00318 Data: 0000
Capabilities: [90] Subsystem: Dell Device 04b3
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport
00: 86 80 1e 1c 07 04 10 00 b5 00 04 06 10 00 81 00
10: 00 00 00 00 00 00 00 00 00 11 16 00 c0 d0 00 00
20: c0 f6 c0 f7 01 f0 01 f1 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 04 10 00
40: 10 80 42 01 00 80 00 00 00 00 11 00 12 3c 12 08
50: 40 00 11 70 60 b2 3c 00 28 00 40 01 00 00 00 00
60: 00 00 00 00 16 00 00 00 00 00 00 00 00 00 00 00
70: 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 05 90 01 00 18 03 e0 fe 00 00 00 00 00 00 00 00
90: 0d a0 00 00 28 10 b3 04 00 00 00 00 00 00 00 00
a0: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 01 02 0b 00 00 02 80 11 c1 00 00 00 00
e0: 00 03 00 00 00 00 00 00 01 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 87 0f 06 08 00 00 00 00
[-- Attachment #5: 4_unplugged_DeLock.txt --]
[-- Type: text/plain, Size: 3715 bytes --]
00:1c.7 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=11, subordinate=16, sec-latency=0
I/O behind bridge: 0000c000-0000dfff
Memory behind bridge: f6c00000-f7cfffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f10fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #8, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #7, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq+ LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee00318 Data: 0000
Capabilities: [90] Subsystem: Dell Device 04b3
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport
00: 86 80 1e 1c 07 04 10 00 b5 00 04 06 10 00 81 00
10: 00 00 00 00 00 00 00 00 00 11 16 00 c0 d0 00 20
20: c0 f6 c0 f7 01 f0 01 f1 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 04 10 00
40: 10 80 42 01 00 80 00 00 00 00 11 00 12 3c 12 08
50: 40 00 11 50 60 b2 3c 00 28 00 00 01 00 00 00 00
60: 00 00 00 00 16 00 00 00 00 00 00 00 00 00 00 00
70: 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 05 90 01 00 18 03 e0 fe 00 00 00 00 00 00 00 00
90: 0d a0 00 00 28 10 b3 04 00 00 00 00 00 00 00 00
a0: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 01 02 0b 00 00 02 80 11 c1 00 00 00 00
e0: 00 03 00 00 00 00 00 00 01 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 87 0f 06 08 00 00 00 00
[-- Attachment #6: 5_card_slipped_out.txt --]
[-- Type: text/plain, Size: 3715 bytes --]
00:1c.7 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=11, subordinate=16, sec-latency=0
I/O behind bridge: 0000c000-0000dfff
Memory behind bridge: f6c00000-f7cfffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f10fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #8, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #7, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq+ LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee00318 Data: 0000
Capabilities: [90] Subsystem: Dell Device 04b3
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport
00: 86 80 1e 1c 07 04 10 00 b5 00 04 06 10 00 81 00
10: 00 00 00 00 00 00 00 00 00 11 16 00 c0 d0 00 20
20: c0 f6 c0 f7 01 f0 01 f1 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 04 10 00
40: 10 80 42 01 00 80 00 00 00 00 11 00 12 3c 12 08
50: 40 00 11 50 60 b2 3c 00 28 00 00 01 00 00 00 00
60: 00 00 00 00 16 00 00 00 00 00 00 00 00 00 00 00
70: 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 05 90 01 00 18 03 e0 fe 00 00 00 00 00 00 00 00
90: 0d a0 00 00 28 10 b3 04 00 00 00 00 00 00 00 00
a0: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 01 02 0b 00 00 02 80 11 c1 00 00 00 00
e0: 00 03 00 00 00 00 00 00 01 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 87 0f 06 08 00 00 00 00
[-- Attachment #7: 6_re-inserted-DeLock.txt --]
[-- Type: text/plain, Size: 3715 bytes --]
00:1c.7 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=11, subordinate=16, sec-latency=0
I/O behind bridge: 0000c000-0000dfff
Memory behind bridge: f6c00000-f7cfffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f10fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #8, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #7, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq+ LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee00318 Data: 0000
Capabilities: [90] Subsystem: Dell Device 04b3
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport
00: 86 80 1e 1c 07 04 10 00 b5 00 04 06 10 00 81 00
10: 00 00 00 00 00 00 00 00 00 11 16 00 c0 d0 00 00
20: c0 f6 c0 f7 01 f0 01 f1 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 04 10 00
40: 10 80 42 01 00 80 00 00 00 00 11 00 12 3c 12 08
50: 40 00 11 70 60 b2 3c 00 28 00 40 01 00 00 00 00
60: 00 00 00 00 16 00 00 00 00 00 00 00 00 00 00 00
70: 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 05 90 01 00 18 03 e0 fe 00 00 00 00 00 00 00 00
90: 0d a0 00 00 28 10 b3 04 00 00 00 00 00 00 00 00
a0: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 01 02 0b 00 00 02 80 11 c1 00 00 00 00
e0: 00 03 00 00 00 00 00 00 01 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 87 0f 06 08 00 00 00 00
[-- Attachment #8: 7_unplugged_DeLock.txt --]
[-- Type: text/plain, Size: 3715 bytes --]
00:1c.7 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=11, subordinate=16, sec-latency=0
I/O behind bridge: 0000c000-0000dfff
Memory behind bridge: f6c00000-f7cfffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f10fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #8, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #7, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq+ LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee00318 Data: 0000
Capabilities: [90] Subsystem: Dell Device 04b3
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport
00: 86 80 1e 1c 07 04 10 00 b5 00 04 06 10 00 81 00
10: 00 00 00 00 00 00 00 00 00 11 16 00 c0 d0 00 20
20: c0 f6 c0 f7 01 f0 01 f1 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 04 10 00
40: 10 80 42 01 00 80 00 00 00 00 11 00 12 3c 12 08
50: 40 00 11 50 60 b2 3c 00 28 00 00 01 00 00 00 00
60: 00 00 00 00 16 00 00 00 00 00 00 00 00 00 00 00
70: 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 05 90 01 00 18 03 e0 fe 00 00 00 00 00 00 00 00
90: 0d a0 00 00 28 10 b3 04 00 00 00 00 00 00 00 00
a0: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 01 02 0b 00 00 02 80 11 c1 00 00 00 00
e0: 00 03 00 00 00 00 00 00 01 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 87 0f 06 08 00 00 00 00
[-- Attachment #9: 8_Evolve_slipped_out.txt --]
[-- Type: text/plain, Size: 3721 bytes --]
00:1c.7 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=11, subordinate=16, sec-latency=0
I/O behind bridge: 0000c000-0000dfff
Memory behind bridge: f6c00000-f7cfffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f10fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #8, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #7, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq+ LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee00318 Data: 0000
Capabilities: [90] Subsystem: Dell Device 04b3
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport
00: 86 80 1e 1c 07 04 10 00 b5 00 04 06 10 00 81 00
10: 00 00 00 00 00 00 00 00 00 11 16 00 c0 d0 00 00
20: c0 f6 c0 f7 01 f0 01 f1 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 04 10 00
40: 10 80 42 01 00 80 00 00 00 00 11 00 12 3c 12 08
50: 43 00 11 70 60 b2 3c 00 28 00 40 01 00 00 00 00
60: 00 00 00 00 16 00 00 00 00 00 00 00 00 00 00 00
70: 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 05 90 01 00 18 03 e0 fe 00 00 00 00 00 00 00 00
90: 0d a0 00 00 28 10 b3 04 00 00 00 00 00 00 00 00
a0: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 01 02 0b 00 00 02 80 11 c1 00 00 00 00
e0: 00 03 00 00 00 00 00 00 03 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 87 0f 06 08 00 00 00 00
[-- Attachment #10: 9_inserted-Evolve.txt --]
[-- Type: text/plain, Size: 3721 bytes --]
00:1c.7 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=11, subordinate=16, sec-latency=0
I/O behind bridge: 0000c000-0000dfff
Memory behind bridge: f6c00000-f7cfffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f10fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #8, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #7, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq+ LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee00318 Data: 0000
Capabilities: [90] Subsystem: Dell Device 04b3
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport
00: 86 80 1e 1c 07 04 10 00 b5 00 04 06 10 00 81 00
10: 00 00 00 00 00 00 00 00 00 11 16 00 c0 d0 00 00
20: c0 f6 c0 f7 01 f0 01 f1 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 04 10 00
40: 10 80 42 01 00 80 00 00 00 00 11 00 12 3c 12 08
50: 43 00 11 70 60 b2 3c 00 28 00 40 01 00 00 00 00
60: 00 00 00 00 16 00 00 00 00 00 00 00 00 00 00 00
70: 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 05 90 01 00 18 03 e0 fe 00 00 00 00 00 00 00 00
90: 0d a0 00 00 28 10 b3 04 00 00 00 00 00 00 00 00
a0: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 01 02 0b 00 00 02 80 11 c1 00 00 00 00
e0: 00 03 00 00 00 00 00 00 03 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 87 0f 06 08 00 00 00 00
[-- Attachment #11: 10_unplugged_Evolve.txt --]
[-- Type: text/plain, Size: 3721 bytes --]
00:1c.7 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=11, subordinate=16, sec-latency=0
I/O behind bridge: 0000c000-0000dfff
Memory behind bridge: f6c00000-f7cfffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f10fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #8, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #7, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq+ LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee00318 Data: 0000
Capabilities: [90] Subsystem: Dell Device 04b3
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport
00: 86 80 1e 1c 07 04 10 00 b5 00 04 06 10 00 81 00
10: 00 00 00 00 00 00 00 00 00 11 16 00 c0 d0 00 00
20: c0 f6 c0 f7 01 f0 01 f1 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 04 10 00
40: 10 80 42 01 00 80 00 00 00 00 11 00 12 3c 12 08
50: 43 00 11 70 60 b2 3c 00 28 00 40 01 00 00 00 00
60: 00 00 00 00 16 00 00 00 00 00 00 00 00 00 00 00
70: 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 05 90 01 00 18 03 e0 fe 00 00 00 00 00 00 00 00
90: 0d a0 00 00 28 10 b3 04 00 00 00 00 00 00 00 00
a0: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 01 02 0b 00 00 02 80 11 c1 00 00 00 00
e0: 00 03 00 00 00 00 00 00 03 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 87 0f 06 08 00 00 00 00
[-- Attachment #12: 11_inserted_Zalman.txt --]
[-- Type: text/plain, Size: 3721 bytes --]
00:1c.7 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=11, subordinate=16, sec-latency=0
I/O behind bridge: 0000c000-0000dfff
Memory behind bridge: f6c00000-f7cfffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f10fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #8, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #7, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq+ LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee00318 Data: 0000
Capabilities: [90] Subsystem: Dell Device 04b3
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport
00: 86 80 1e 1c 07 04 10 00 b5 00 04 06 10 00 81 00
10: 00 00 00 00 00 00 00 00 00 11 16 00 c0 d0 00 00
20: c0 f6 c0 f7 01 f0 01 f1 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 04 10 00
40: 10 80 42 01 00 80 00 00 00 00 11 00 12 3c 12 08
50: 43 00 11 70 60 b2 3c 00 28 00 40 01 00 00 00 00
60: 00 00 00 00 16 00 00 00 00 00 00 00 00 00 00 00
70: 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 05 90 01 00 18 03 e0 fe 00 00 00 00 00 00 00 00
90: 0d a0 00 00 28 10 b3 04 00 00 00 00 00 00 00 00
a0: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 01 02 0b 00 00 02 80 11 c1 00 00 00 00
e0: 00 03 00 00 00 00 00 00 03 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 87 0f 06 08 00 00 00 00
[-- Attachment #13: 12_unplugged_Zalman.txt --]
[-- Type: text/plain, Size: 3721 bytes --]
00:1c.7 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=11, subordinate=16, sec-latency=0
I/O behind bridge: 0000c000-0000dfff
Memory behind bridge: f6c00000-f7cfffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f10fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #8, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #7, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq+ LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee00318 Data: 0000
Capabilities: [90] Subsystem: Dell Device 04b3
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport
00: 86 80 1e 1c 07 04 10 00 b5 00 04 06 10 00 81 00
10: 00 00 00 00 00 00 00 00 00 11 16 00 c0 d0 00 00
20: c0 f6 c0 f7 01 f0 01 f1 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 04 10 00
40: 10 80 42 01 00 80 00 00 00 00 11 00 12 3c 12 08
50: 43 00 11 70 60 b2 3c 00 28 00 40 01 00 00 00 00
60: 00 00 00 00 16 00 00 00 00 00 00 00 00 00 00 00
70: 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 05 90 01 00 18 03 e0 fe 00 00 00 00 00 00 00 00
90: 0d a0 00 00 28 10 b3 04 00 00 00 00 00 00 00 00
a0: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 01 02 0b 00 00 02 80 11 c1 00 00 00 00
e0: 00 03 00 00 00 00 00 00 03 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 87 0f 06 08 00 00 00 00
[-- Attachment #14: 13_inserted_Zalman.txt --]
[-- Type: text/plain, Size: 3721 bytes --]
00:1c.7 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=11, subordinate=16, sec-latency=0
I/O behind bridge: 0000c000-0000dfff
Memory behind bridge: f6c00000-f7cfffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f10fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #8, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #7, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq+ LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee00318 Data: 0000
Capabilities: [90] Subsystem: Dell Device 04b3
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport
00: 86 80 1e 1c 07 04 10 00 b5 00 04 06 10 00 81 00
10: 00 00 00 00 00 00 00 00 00 11 16 00 c0 d0 00 00
20: c0 f6 c0 f7 01 f0 01 f1 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 04 10 00
40: 10 80 42 01 00 80 00 00 00 00 11 00 12 3c 12 08
50: 43 00 11 70 60 b2 3c 00 28 00 40 01 00 00 00 00
60: 00 00 00 00 16 00 00 00 00 00 00 00 00 00 00 00
70: 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 05 90 01 00 18 03 e0 fe 00 00 00 00 00 00 00 00
90: 0d a0 00 00 28 10 b3 04 00 00 00 00 00 00 00 00
a0: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 01 02 0b 00 00 02 80 11 c1 00 00 00 00
e0: 00 03 00 00 00 00 00 00 03 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 87 0f 06 08 00 00 00 00
[-- Attachment #15: 14_inserted_Axago_firewire.txt --]
[-- Type: text/plain, Size: 3713 bytes --]
00:1c.7 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=11, subordinate=16, sec-latency=0
I/O behind bridge: 0000c000-0000dfff
Memory behind bridge: f6c00000-f7cfffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f10fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #8, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #7, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq+ LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee00318 Data: 0000
Capabilities: [90] Subsystem: Dell Device 04b3
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport
00: 86 80 1e 1c 07 04 10 00 b5 00 04 06 10 00 81 00
10: 00 00 00 00 00 00 00 00 00 11 16 00 c0 d0 00 00
20: c0 f6 c0 f7 01 f0 01 f1 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 04 10 00
40: 10 80 42 01 00 80 00 00 00 00 11 00 12 4c 12 08
50: 00 00 11 70 60 b2 3c 00 28 00 40 01 00 00 00 00
60: 00 00 00 00 16 00 00 00 00 00 00 00 00 00 00 00
70: 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 05 90 01 00 18 03 e0 fe 00 00 00 00 00 00 00 00
90: 0d a0 00 00 28 10 b3 04 00 00 00 00 00 00 00 00
a0: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 01 02 0b 00 00 02 80 11 c1 00 00 00 00
e0: 00 03 00 00 00 00 00 00 03 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 87 0f 06 08 00 00 00 00
[-- Attachment #16: 15_unplugged_Axago_firewire.txt --]
[-- Type: text/plain, Size: 3713 bytes --]
00:1c.7 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=11, subordinate=16, sec-latency=0
I/O behind bridge: 0000c000-0000dfff
Memory behind bridge: f6c00000-f7cfffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f10fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #8, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #7, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq+ LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee00318 Data: 0000
Capabilities: [90] Subsystem: Dell Device 04b3
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport
00: 86 80 1e 1c 07 04 10 00 b5 00 04 06 10 00 81 00
10: 00 00 00 00 00 00 00 00 00 11 16 00 c0 d0 00 20
20: c0 f6 c0 f7 01 f0 01 f1 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 04 10 00
40: 10 80 42 01 00 80 00 00 00 00 11 00 12 4c 12 08
50: 00 00 11 50 60 b2 3c 00 28 00 00 01 00 00 00 00
60: 00 00 00 00 16 00 00 00 00 00 00 00 00 00 00 00
70: 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 05 90 01 00 18 03 e0 fe 00 00 00 00 00 00 00 00
90: 0d a0 00 00 28 10 b3 04 00 00 00 00 00 00 00 00
a0: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 01 02 0b 00 00 02 80 11 c1 00 00 00 00
e0: 00 03 00 00 00 00 00 00 03 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 87 0f 06 08 00 00 00 00
[-- Attachment #17: 16_reinserted_Axago_firewire.txt --]
[-- Type: text/plain, Size: 3713 bytes --]
00:1c.7 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=11, subordinate=16, sec-latency=0
I/O behind bridge: 0000c000-0000dfff
Memory behind bridge: f6c00000-f7cfffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f10fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #8, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #7, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq+ LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee00318 Data: 0000
Capabilities: [90] Subsystem: Dell Device 04b3
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport
00: 86 80 1e 1c 07 04 10 00 b5 00 04 06 10 00 81 00
10: 00 00 00 00 00 00 00 00 00 11 16 00 c0 d0 00 00
20: c0 f6 c0 f7 01 f0 01 f1 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 04 10 00
40: 10 80 42 01 00 80 00 00 00 00 11 00 12 4c 12 08
50: 00 00 11 70 60 b2 3c 00 28 00 40 01 00 00 00 00
60: 00 00 00 00 16 00 00 00 00 00 00 00 00 00 00 00
70: 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 05 90 01 00 18 03 e0 fe 00 00 00 00 00 00 00 00
90: 0d a0 00 00 28 10 b3 04 00 00 00 00 00 00 00 00
a0: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 01 02 0b 00 00 02 80 11 c1 00 00 00 00
e0: 00 03 00 00 00 00 00 00 03 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 87 0f 06 08 00 00 00 00
[-- Attachment #18: 17_unplugged_Axago_firewire.txt --]
[-- Type: text/plain, Size: 3713 bytes --]
00:1c.7 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=11, subordinate=16, sec-latency=0
I/O behind bridge: 0000c000-0000dfff
Memory behind bridge: f6c00000-f7cfffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f10fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #8, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #7, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq+ LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee00318 Data: 0000
Capabilities: [90] Subsystem: Dell Device 04b3
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport
00: 86 80 1e 1c 07 04 10 00 b5 00 04 06 10 00 81 00
10: 00 00 00 00 00 00 00 00 00 11 16 00 c0 d0 00 20
20: c0 f6 c0 f7 01 f0 01 f1 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 04 10 00
40: 10 80 42 01 00 80 00 00 00 00 11 00 12 4c 12 08
50: 00 00 11 50 60 b2 3c 00 28 00 00 01 00 00 00 00
60: 00 00 00 00 16 00 00 00 00 00 00 00 00 00 00 00
70: 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 05 90 01 00 18 03 e0 fe 00 00 00 00 00 00 00 00
90: 0d a0 00 00 28 10 b3 04 00 00 00 00 00 00 00 00
a0: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 01 02 0b 00 00 02 80 11 c1 00 00 00 00
e0: 00 03 00 00 00 00 00 00 03 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 87 0f 06 08 00 00 00 00
[-- Attachment #19: README.TXT --]
[-- Type: text/plain, Size: 1238 bytes --]
# lspci -vvxxx -s 00:1c.7 > 1_fresh_after_bootup.txt
# inserting DeLock card
# lspci -vvxxx -s 00:1c.7 > 2_card_slipped_out.txt
# # re-inserting the card
# lspci -vvxxx -s 00:1c.7 > 3_re-inserted-DeLock.txt
# # unpluggibg
# lspci -vvxxx -s 00:1c.7 > 4_unplugged_DeLock.txt
# # re-inserting the card
# # slipped out
# lspci -vvxxx -s 00:1c.7 > 5_card_slipped_out.txt
# # re-inserting
# lspci -vvxxx -s 00:1c.7 > 6_re-inserted-DeLock.txt
# # removing
# lspci -vvxxx -s 00:1c.7 > 7_unplugged_DeLock.txt
# # inserting Evolve
# lspci -vvxxx -s 00:1c.7 > 8_Evolve_slipped_out.txt
# # re-inserting
# lspci -vvxxx -s 00:1c.7 > 9_inserted-Evolve.txt
# # unplugging
# lspci -vvxxx -s 00:1c.7 > 10_unplugged_Evolve.txt
# # inserted Zalman
# lspci -vvxxx -s 00:1c.7 > 11_inserted_Zalman.txt
# # removing
# lspci -vvxxx -s 00:1c.7 > 12_unplugged_Zalman.txt
# # reinserting
# lspci -vvxxx -s 00:1c.7 > 13_inserted_Zalman.txt
# # unplugging
# # inserting firewire
# lspci -vvxxx -s 00:1c.7 > 14_inserted_Axago_firewire.txt
# # unplugging
# lspci -vvxxx -s 00:1c.7 > 15_unplugged_Axago_firewire.txt
# # re-inserting
# lspci -vvxxx -s 00:1c.7 > 16_reinserted_Axago_firewire.txt
# # unplugginng
# lspci -vvxxx -s 00:1c.7 > 17_unplugged_Axago_firewire.txt
^ permalink raw reply [flat|nested] 55+ messages in thread
end of thread, other threads:[~2012-05-04 21:21 UTC | newest]
Thread overview: 55+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-03-21 21:29 3.2.11: PCI Express card cannot be re-detected withing cca 60sec timeframe Martin Mokrejs
2012-03-21 22:29 ` Yinghai Lu
[not found] ` <4F6A5A53.305@fold.natur.cuni.cz>
2012-03-22 0:08 ` Yinghai Lu
[not found] ` <4F8BEB1D.9080903@fold.natur.cuni.cz>
2012-04-16 10:53 ` Martin Mokrejs
2012-04-16 11:05 ` Martin Mokrejs
2012-04-16 18:07 ` Yinghai Lu
2012-04-16 19:39 ` Martin Mokrejs
2012-04-16 19:45 ` Martin Mokrejs
2012-04-16 21:04 ` Yinghai Lu
2012-04-17 8:56 ` Martin Mokrejs
[not found] ` <4F8C6E4E.1000205@fold.natur.cuni.cz>
2012-04-16 20:53 ` Yinghai Lu
2012-04-17 1:42 ` Yinghai Lu
2012-04-17 2:48 ` Yinghai Lu
2012-04-17 7:27 ` Martin Mokrejs
2012-04-17 8:46 ` Yinghai Lu
2012-04-17 8:58 ` Yinghai Lu
2012-04-17 9:34 ` Martin Mokrejs
2012-04-17 17:07 ` Yinghai Lu
2012-04-17 19:02 ` Yinghai Lu
2012-04-18 17:53 ` Martin Mokrejs
2012-04-18 19:48 ` Yinghai Lu
2012-04-18 20:29 ` Martin Mokrejs
2012-04-18 20:58 ` Yinghai Lu
2012-04-18 22:55 ` Martin Mokrejs
2012-04-19 1:57 ` Yinghai Lu
2012-04-19 3:16 ` Mark Lord
2012-04-19 23:16 ` Martin Mokrejs
2012-04-19 21:48 ` Yinghai Lu
2012-04-20 2:06 ` Yinghai Lu
2012-04-20 11:23 ` Martin Mokrejs
2012-04-20 16:01 ` Yinghai Lu
2012-04-20 17:25 ` Martin Mokrejs
2012-04-20 17:28 ` Martin Mokrejs
2012-04-20 18:47 ` Yinghai Lu
2012-04-20 23:17 ` Sarah Sharp
2012-04-21 0:09 ` Yinghai Lu
2012-04-21 4:46 ` Yinghai Lu
2012-04-21 9:01 ` Martin Mokrejs
2012-04-21 9:12 ` Martin Mokrejs
2012-04-21 13:25 ` Sarah Sharp
2012-04-21 18:46 ` Yinghai Lu
2012-04-24 20:47 ` Martin Mokrejs
2012-04-24 20:48 ` Martin Mokrejs
2012-04-26 16:08 ` Yinghai Lu
2012-04-26 22:08 ` Martin Mokrejs
2012-04-26 22:44 ` Yinghai Lu
2012-04-26 23:26 ` Martin Mokrejs
2012-04-27 3:51 ` Yinghai Lu
2012-04-20 23:50 ` Martin Mokrejs
2012-04-21 0:04 ` Yinghai Lu
2012-05-04 16:16 ` Martin Mokrejs
2012-04-19 17:32 ` Martin Mokrejs
2012-04-19 18:13 ` Yinghai Lu
2012-05-04 15:58 ` Martin Mokrejs
2012-05-04 20:43 ` Martin Mokrejs
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.