From mboxrd@z Thu Jan 1 00:00:00 1970 From: BYEONG-GI KIM Subject: Re: DPDK supported processor Date: Thu, 21 Aug 2014 18:17:57 +0900 Message-ID: References: Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: quoted-printable To: Chae-yong Chong , dev-VfR2kkLFssw@public.gmane.org Return-path: In-Reply-To: List-Id: patches and discussions about DPDK List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: dev-bounces-VfR2kkLFssw@public.gmane.org Sender: "dev" Well, I did think that the NIC in my testing machine may not support DPDK rather than thinking l3fwd is not working. I just tested the l3fwd sample application to identify whether the NIC supports DPDK or not. Best regards Byeong-Gi KIM 2014-08-21 18:14 GMT+09:00 Chae-yong Chong : > Hi > > Could you give the details why you think the l3fwd is not working > > Best regards, > Chae-yong > > 2014=EB=85=84 8=EC=9B=94 21=EC=9D=BC =EB=AA=A9=EC=9A=94=EC=9D=BC, BYEONG-= GI KIM=EB=8B=98=EC=9D=B4 =EC=9E=91=EC=84=B1=ED=95=9C= =EB=A9=94=EC=8B=9C=EC=A7=80: > > Thank you for the reply. >> >> I tested l3forwarding sample application, and the results were as below: >> >> sudo ./build/l3fwd -c 0x0F -n 4 -- -p 0x03 >> --config=3D"(0,0,0),(0,1,1),(1,0,2),(1,1,3)" >> EAL: Detected lcore 0 as core 0 on socket 0 >> EAL: Detected lcore 1 as core 1 on socket 0 >> EAL: Detected lcore 2 as core 2 on socket 0 >> EAL: Detected lcore 3 as core 3 on socket 0 >> EAL: Detected lcore 4 as core 4 on socket 0 >> EAL: Detected lcore 5 as core 5 on socket 0 >> EAL: Detected lcore 6 as core 6 on socket 0 >> EAL: Detected lcore 7 as core 7 on socket 0 >> EAL: Support maximum 64 logical core(s) by configuration. >> EAL: Detected 8 lcore(s) >> EAL: Searching for IVSHMEM devices... >> EAL: No IVSHMEM configuration found! >> EAL: Setting up memory... >> EAL: Ask a virtual area of 0x5ffc00000 bytes >> EAL: Virtual area found at 0x2aa4aae00000 (size =3D 0x5ffc00000) >> >> EAL: Ask a virtual area of 0x200000 bytes >> EAL: Virtual area found at 0x7ffff3e00000 (size =3D 0x200000) >> EAL: Ask a virtual area of 0x200000 bytes >> EAL: Virtual area found at 0x7ffff3a00000 (size =3D 0x200000) >> EAL: Requesting 12288 pages of size 2MB from socket 0 >> EAL: TSC frequency is ~2399998 KHz >> EAL: Master core 0 is ready (tid=3Df7fe9800) >> EAL: Core 3 is ready (tid=3Df5998700) >> EAL: Core 2 is ready (tid=3Df6199700) >> EAL: Core 1 is ready (tid=3Df699a700) >> EAL: PCI device 0000:00:14.0 on NUMA socket -1 >> EAL: probe driver: 8086:1f41 rte_igb_pmd >> EAL: PCI memory mapped at 0x7ffff7f8d000 >> EAL: PCI memory mapped at 0x7ffff7f89000 >> EAL: PCI device 0000:00:14.1 on NUMA socket -1 >> EAL: probe driver: 8086:1f41 rte_igb_pmd >> EAL: PCI memory mapped at 0x7ffff7f69000 >> EAL: PCI memory mapped at 0x7ffff7f65000 >> EAL: PCI device 0000:00:14.2 on NUMA socket -1 >> EAL: probe driver: 8086:1f41 rte_igb_pmd >> EAL: 0000:00:14.2 not managed by UIO driver, skipping >> EAL: PCI device 0000:00:14.3 on NUMA socket -1 >> EAL: probe driver: 8086:1f41 rte_igb_pmd >> EAL: 0000:00:14.3 not managed by UIO driver, skipping >> EAL: PCI device 0000:00:14.2 on NUMA socket -1 >> EAL: probe driver: 8086:1f41 rte_igb_pmd >> EAL: 0000:00:14.2 not managed by UIO driver, skipping >> EAL: PCI device 0000:00:14.3 on NUMA socket -1 >> EAL: probe driver: 8086:1f41 rte_igb_pmd >> EAL: 0000:00:14.3 not managed by UIO driver, skipping >> Initializing port 0 ... Creating queues: nb_rxq=3D2 nb_txq=3D4... >> Address:0C:C4:7A:05:52:7A, Allocated mbuf pool on socket 0 >> LPM: Adding route 0x01010100 / 24 (0) >> LPM: Adding route 0x02010100 / 24 (1) >> LPM: Adding route IPV6 / 48 (0) >> LPM: Adding route IPV6 / 48 (1) >> txq=3D0,0,0 PMD: To improve 1G driver performance, consider setting the = TX >> WTHRESH value to 4, 8, or 16. >> txq=3D1,1,0 PMD: To improve 1G driver performance, consider setting the = TX >> WTHRESH value to 4, 8, or 16. >> txq=3D2,2,0 PMD: To improve 1G driver performance, consider setting the = TX >> WTHRESH value to 4, 8, or 16. >> txq=3D3,3,0 PMD: To improve 1G driver performance, consider setting the = TX >> WTHRESH value to 4, 8, or 16. >> >> Initializing port 1 ... Creating queues: nb_rxq=3D2 nb_txq=3D4... >> Address:0C:C4:7A:05:52:7B, txq=3D0,0,0 PMD: To improve 1G driver >> performance, consider setting the TX WTHRESH value to 4, 8, or 16. >> txq=3D1,1,0 PMD: To improve 1G driver performance, consider setting the = TX >> WTHRESH value to 4, 8, or 16. >> txq=3D2,2,0 PMD: To improve 1G driver performance, consider setting the = TX >> WTHRESH value to 4, 8, or 16. >> txq=3D3,3,0 PMD: To improve 1G driver performance, consider setting the = TX >> WTHRESH value to 4, 8, or 16. >> >> >> Initializing rx queues on lcore 0 ... rxq=3D0,0,0 >> Initializing rx queues on lcore 1 ... rxq=3D0,1,0 >> Initializing rx queues on lcore 2 ... rxq=3D1,0,0 >> Initializing rx queues on lcore 3 ... rxq=3D1,1,0 >> >> Checking link status.................done >> Port 0 Link Up - speed 100 Mbps - full-duplex >> Port 1 Link Up - speed 100 Mbps - full-duplex >> L3FWD: entering main loop on lcore 1 >> L3FWD: entering main loop on lcore 3 >> L3FWD: -- lcoreid=3D1 portid=3D0 rxqueueid=3D1 >> L3FWD: -- lcoreid=3D3 portid=3D1 rxqueueid=3D1 >> L3FWD: entering main loop on lcore 0 >> L3FWD: -- lcoreid=3D0 portid=3D0 rxqueueid=3D0 >> L3FWD: entering main loop on lcore 2 >> L3FWD: -- lcoreid=3D2 portid=3D1 rxqueueid=3D0 >> >> Anyway, I'll also try to test the testpmd application. >> >> Best regards >> >> Byeong-Gi KIM >> >> >> >> 2014-08-21 17:56 GMT+09:00 De Lara Guarch, Pablo < >> pablo.de.lara.guarch-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>: >> >> > > -----Original Message----- >> > > From: dev [mailto:dev-bounces-VfR2kkLFssw@public.gmane.org] On Behalf Of BYEONG-GI KIM >> > > Sent: Thursday, August 21, 2014 7:04 AM >> > > To: dev-VfR2kkLFssw@public.gmane.org >> > > Subject: [dpdk-dev] DPDK supported processor >> > > >> > > Hello. >> > > >> > > I'm now using Intel Atom processor C2758 on the DPDK testing machine= s, >> > but >> > > it seems not working. >> > > >> > > Which sample application would be recommended to test the NIC actual= ly >> > > works well with DPDK? >> > > >> > > Best regards >> > > >> > > Byeong-Gi KIM >> > >> > Hi, >> > >> > Testpmd is the best application you can use for that. >> > >> > Best regards, >> > Pablo >> > >> > > > -- > > > May the Fun with you. >