All of lore.kernel.org
 help / color / mirror / Atom feed
From: Chin Liang See <seechinliang@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH1/1] socfpga: Separating the configuration file for Virtual Target and real hardware Cyclone V development kit
Date: Thu, 27 Jun 2013 08:26:03 -0500	[thread overview]
Message-ID: <CAEM3b1DmAD1X29bgx0TY2n4faWi6D3RAncAGRQ+LmhywAEX9JA@mail.gmail.com> (raw)
In-Reply-To: <0BB3B561D7068A4E89FD8E9ABFB538BEB3B2E44330@PG-ITMSG03.altera.priv.altera.com>

socfpga: Separating the configuration file for Virtual  Target and
real hardware Cyclone V development kit

Signed-off-by: Chin Liang See <clsee@altera.com>
---
 include/configs/socfpga_cyclone5.h |   28 +++++++++++++++++++++-------
 1 files changed, 21 insertions(+), 7 deletions(-)

diff --git a/include/configs/socfpga_cyclone5.h
b/include/configs/socfpga_cyclone5.h
index 5633d2a..86563b7 100644
--- a/include/configs/socfpga_cyclone5.h
+++ b/include/configs/socfpga_cyclone5.h
@@ -22,6 +22,8 @@
 /*
  * High level configuration
  */
+/* Running on virtual target or real hardware */ #define
+CONFIG_SOCFPGA_VIRTUAL_TARGET

 #define CONFIG_ARMV7
 #define CONFIG_L2_OFF
@@ -32,11 +34,12 @@
 #define CONFIG_SINGLE_BOOTLOADER
 #define CONFIG_SOCFPGA

+/* base address for .text section */
+#ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
 #define CONFIG_SYS_TEXT_BASE        0x08000040
-#define V_NS16550_CLK            1000000
-#define CONFIG_BAUDRATE            57600
-#define CONFIG_SYS_HZ            1000
-#define CONFIG_TIMER_CLOCK_KHZ        2400
+#else
+#define CONFIG_SYS_TEXT_BASE        0x01000040
+#endif
 #define CONFIG_SYS_LOAD_ADDR        0x7fc0

 /* Console I/O Buffer Size */
@@ -165,7 +168,7 @@
 /* SDRAM Bank #1 */
 #define CONFIG_SYS_SDRAM_BASE        0x00000000
 /* SDRAM memory size */
-#define PHYS_SDRAM_1_SIZE        0x80000000
+#define PHYS_SDRAM_1_SIZE        0x40000000

 #define PHYS_SDRAM_1            CONFIG_SYS_SDRAM_BASE
 #define CONFIG_SYS_MEMTEST_START    0x00000000
@@ -181,8 +184,13 @@
 #define CONFIG_SYS_NS16550_CLK          V_NS16550_CLK
 #define CONFIG_CONS_INDEX               1
 #define CONFIG_SYS_NS16550_COM1        UART0_BASE
-
 #define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600, 115200}
+#ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
+#define V_NS16550_CLK            1000000
+#else
+#define V_NS16550_CLK            100000000
+#endif
+#define CONFIG_BAUDRATE            115200

 /*
  * FLASH
@@ -195,9 +203,15 @@
 /* This timer use eosc1 where the clock frequency is fixed
  * throughout any condition */
 #define CONFIG_SYS_TIMERBASE        SOCFPGA_OSC1TIMER0_ADDRESS
-
 /* reload value when timer count to zero */
 #define TIMER_LOAD_VAL            0xFFFFFFFF
+/* Timer info */
+#define CONFIG_SYS_HZ            1000
+#ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
+#define CONFIG_TIMER_CLOCK_KHZ        2400
+#else
+#define CONFIG_TIMER_CLOCK_KHZ        25000
+#endif

 #define CONFIG_ENV_IS_NOWHERE

--
1.7.7.4

       reply	other threads:[~2013-06-27 13:26 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <CAEM3b1DEZZBX2rm6c8ctR7TYz7X4OSUYucWdC+n7m4_9tKn+Xg@mail.gmail.com>
     [not found] ` <0BB3B561D7068A4E89FD8E9ABFB538BEB3B2E44330@PG-ITMSG03.altera.priv.altera.com>
2013-06-27 13:26   ` Chin Liang See [this message]
2013-06-28 11:22     ` [U-Boot] [PATCH1/1] socfpga: Separating the configuration file for Virtual Target and real hardware Cyclone V development kit Pavel Machek
2013-06-28 16:05       ` Chin Liang See
2013-06-28 16:09         ` Stefan Roese
2013-06-28 20:23       ` [U-Boot] [PATCH v2 1/1] " Chin Liang See
2013-06-28 22:47         ` Wolfgang Denk
2013-07-01 13:44           ` Chin Liang See
2013-07-01 14:05           ` [U-Boot] [PATCH v3 1/1] socfpga: Adding configuration for " Chin Liang See

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CAEM3b1DmAD1X29bgx0TY2n4faWi6D3RAncAGRQ+LmhywAEX9JA@mail.gmail.com \
    --to=seechinliang@gmail.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.