All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bin Meng <bmeng.cn@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v4 1/1] board: arm: Add support for Broadcom BCM7445
Date: Mon, 26 Aug 2019 23:54:35 +0800	[thread overview]
Message-ID: <CAEUhbmUYSh_Fh1=qz98z-3SoGV5=ZqckvX3-eoqnimDTU6ZTDg@mail.gmail.com> (raw)
In-Reply-To: <16fc0901f4521d3c399eac950c52a634b2f9473b.1528485916.git.fitzsim@fitzsim.org>

Hi Thomas,

On Sat, Jun 9, 2018 at 6:06 AM Thomas Fitzsimmons <fitzsim@fitzsim.org> wrote:
>
> Add support for loading U-Boot on the Broadcom 7445 SoC.  This port
> assumes Broadcom's BOLT bootloader is acting as the second stage
> bootloader, and U-Boot is acting as the third stage bootloader, loaded
> as an ELF program by BOLT.
>
> Signed-off-by: Thomas Fitzsimmons <fitzsim@fitzsim.org>
> Cc: Stefan Roese <sr@denx.de>
> Cc: Tom Rini <trini@konsulko.com>
> Cc: Florian Fainelli <f.fainelli@gmail.com>
> ---
> Changes for v4:
>    - Use high timer register for get_ticks
>    - Move hard-coded register addresses from Kconfig to header
>    - Document I-cache/D-cache expectation
>
>  MAINTAINERS                                     |  10 +
>  arch/arm/Kconfig                                |  12 +
>  arch/arm/Makefile                               |   1 +
>  arch/arm/mach-bcmstb/Kconfig                    |  36 ++
>  arch/arm/mach-bcmstb/Makefile                   |   8 +
>  arch/arm/mach-bcmstb/include/mach/gpio.h        |  11 +
>  arch/arm/mach-bcmstb/include/mach/hardware.h    |  11 +
>  arch/arm/mach-bcmstb/include/mach/prior_stage.h |  30 ++
>  arch/arm/mach-bcmstb/include/mach/sdhci.h       |  15 +
>  arch/arm/mach-bcmstb/include/mach/timer.h       |  13 +
>  arch/arm/mach-bcmstb/lowlevel_init.S            |  21 ++
>  board/broadcom/bcmstb/MAINTAINERS               |   7 +
>  board/broadcom/bcmstb/Makefile                  |   8 +
>  board/broadcom/bcmstb/bcmstb.c                  | 194 +++++++++++
>  configs/bcm7445_defconfig                       |  27 ++
>  doc/README.bcm7xxx                              | 150 ++++++++
>  drivers/mmc/Kconfig                             |  11 +
>  drivers/mmc/Makefile                            |   1 +
>  drivers/mmc/bcmstb_sdhci.c                      |  67 ++++
>  drivers/spi/Kconfig                             |   7 +
>  drivers/spi/Makefile                            |   1 +
>  drivers/spi/bcmstb_spi.c                        | 439 ++++++++++++++++++++++++
>  drivers/spi/spi-uclass.c                        |   2 +-
>  dts/Kconfig                                     |   7 +
>  include/configs/bcm7445.h                       |  26 ++
>  include/configs/bcmstb.h                        | 183 ++++++++++
>  include/fdtdec.h                                |   4 +
>  lib/fdtdec.c                                    |   4 +
>  28 files changed, 1305 insertions(+), 1 deletion(-)
>  create mode 100644 arch/arm/mach-bcmstb/Kconfig
>  create mode 100644 arch/arm/mach-bcmstb/Makefile
>  create mode 100644 arch/arm/mach-bcmstb/include/mach/gpio.h
>  create mode 100644 arch/arm/mach-bcmstb/include/mach/hardware.h
>  create mode 100644 arch/arm/mach-bcmstb/include/mach/prior_stage.h
>  create mode 100644 arch/arm/mach-bcmstb/include/mach/sdhci.h
>  create mode 100644 arch/arm/mach-bcmstb/include/mach/timer.h
>  create mode 100644 arch/arm/mach-bcmstb/lowlevel_init.S
>  create mode 100644 board/broadcom/bcmstb/MAINTAINERS
>  create mode 100644 board/broadcom/bcmstb/Makefile
>  create mode 100644 board/broadcom/bcmstb/bcmstb.c
>  create mode 100644 configs/bcm7445_defconfig
>  create mode 100644 doc/README.bcm7xxx
>  create mode 100644 drivers/mmc/bcmstb_sdhci.c
>  create mode 100644 drivers/spi/bcmstb_spi.c
>  create mode 100644 include/configs/bcm7445.h
>  create mode 100644 include/configs/bcmstb.h
>

[snip]

> diff --git a/drivers/spi/spi-uclass.c b/drivers/spi/spi-uclass.c
> index d2d091f..c517d06 100644
> --- a/drivers/spi/spi-uclass.c
> +++ b/drivers/spi/spi-uclass.c
> @@ -273,7 +273,7 @@ int spi_get_bus_and_cs(int busnum, int cs, int speed, int mode,
>         bool created = false;
>         int ret;
>
> -#if CONFIG_IS_ENABLED(OF_PLATDATA)
> +#if CONFIG_IS_ENABLED(OF_PLATDATA) || CONFIG_IS_ENABLED(OF_PRIOR_STAGE)

Could you please explain this change a little bit? Why should we call
uclass_first_device_err() for OF_PRIOR_STAGE?

>         ret = uclass_first_device_err(UCLASS_SPI, &bus);
>  #else
>         ret = uclass_get_device_by_seq(UCLASS_SPI, busnum, &bus);
> diff --git a/dts/Kconfig b/dts/Kconfig
> index 0cef225..a1a92f2 100644
> --- a/dts/Kconfig
> +++ b/dts/Kconfig
> @@ -101,6 +101,13 @@ config OF_HOSTFILE
>           This is only useful for Sandbox.  Use the -d flag to U-Boot to
>           specify the file to read.
>
> +config OF_PRIOR_STAGE
> +       bool "Prior stage bootloader DTB for DT control"
> +       help
> +         If this option is enabled, the device tree used for DT
> +         control will be read from a device tree binary, at a memory
> +         location passed to U-Boot by the prior stage bootloader.
> +
>  endchoice
>

[snip]

Regards,
Bin

  parent reply	other threads:[~2019-08-26 15:54 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-06 11:09 [U-Boot] [PATCH 0/1] board: arm: Add support for Broadcom BCM7445D0 Thomas Fitzsimmons
2018-05-06 11:09 ` [U-Boot] [PATCH 1/1] " Thomas Fitzsimmons
2018-05-07 23:48   ` Tom Rini
2018-05-24  0:47     ` Thomas Fitzsimmons
2018-05-08 17:44   ` Florian Fainelli
2018-05-10 13:04     ` Thomas Fitzsimmons
2018-05-10 17:43       ` Florian Fainelli
2018-06-06 20:39         ` Thomas Fitzsimmons
2018-06-06 22:06           ` Florian Fainelli
2018-05-24  1:24 ` [U-Boot] [PATCH v2 0/1] board: arm: Add support for Broadcom BCM7445 Thomas Fitzsimmons
2018-05-24  1:24   ` [U-Boot] [PATCH v2 1/1] " Thomas Fitzsimmons
2018-06-06 11:16     ` [U-Boot] [U-Boot, v2, " Tom Rini
2018-06-06 19:32       ` Thomas Fitzsimmons
2018-06-06 18:35   ` [U-Boot] [PATCH v3 0/1] " Thomas Fitzsimmons
2018-06-06 18:35     ` [U-Boot] [PATCH v3 1/1] " Thomas Fitzsimmons
2018-06-07 16:54       ` Florian Fainelli
2018-06-08 22:25         ` Thomas Fitzsimmons
2018-06-08 21:59     ` [U-Boot] [PATCH v4 0/1] " Thomas Fitzsimmons
2018-06-08 21:59       ` [U-Boot] [PATCH v4 1/1] " Thomas Fitzsimmons
2018-07-11 12:42         ` [U-Boot] [U-Boot, v4, " Tom Rini
2019-08-26 15:54         ` Bin Meng [this message]
2019-08-27 22:31           ` [U-Boot] [PATCH v4 " Thomas Fitzsimmons
2019-08-28 10:19             ` Bin Meng
2019-08-28 17:24               ` Thomas Fitzsimmons
2019-08-29 15:24                 ` Bin Meng
2019-09-05 12:10                   ` Bin Meng
2019-09-17  5:48                     ` Simon Glass
2019-09-06 11:51                   ` [U-Boot] [PATCH 0/2] dm: CONFIG_OF_PRIOR_STAGE request number fixes Thomas Fitzsimmons
2019-09-06 11:51                     ` [U-Boot] [PATCH 1/2] dm: device: Request next sequence number Thomas Fitzsimmons
2019-09-06 13:24                       ` Bin Meng
2019-09-14 13:41                         ` Thomas Fitzsimmons
2019-09-27  1:49                           ` Simon Glass
2019-09-27 23:28                           ` sjg at google.com
2019-09-06 11:51                     ` [U-Boot] [PATCH 2/2] dm: spi: Do not assume first SPI bus Thomas Fitzsimmons
2019-09-27  1:49                       ` Simon Glass
2019-09-27 23:28                       ` sjg at google.com
2019-08-26 15:50   ` [U-Boot] [PATCH v2 0/1] board: arm: Add support for Broadcom BCM7445 Bin Meng

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAEUhbmUYSh_Fh1=qz98z-3SoGV5=ZqckvX3-eoqnimDTU6ZTDg@mail.gmail.com' \
    --to=bmeng.cn@gmail.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.