From mboxrd@z Thu Jan 1 00:00:00 1970 From: Bin Meng Date: Wed, 20 May 2020 14:32:27 +0800 Subject: [PATCH v11 00/18] RISC-V SiFive FU540 support SPL In-Reply-To: <5e56bf39-de67-2a06-5032-37622d5fef3c@gmail.com> References: <20200519070346.24479-1-pragnesh.patel@sifive.com> <752D002CFF5D0F4FA35C0100F1D73F3FA470B54D@ATCPCS16.andestech.com> <5e56bf39-de67-2a06-5032-37622d5fef3c@gmail.com> Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Sean, On Wed, May 20, 2020 at 2:06 PM Sean Anderson wrote: > > On 5/19/20 11:07 PM, Rick Chen wrote: > > Hi Bin > > > >> -----Original Message----- > >> From: Bin Meng [mailto:bmeng.cn at gmail.com] > >> Sent: Tuesday, May 19, 2020 4:44 PM > >> To: Pragnesh Patel; Rick Jian-Zhi Chen(???) > >> Subject: Re: [PATCH v11 00/18] RISC-V SiFive FU540 support SPL > >> > >> Hi Rick, > >> > >> On Tue, May 19, 2020 at 3:04 PM Pragnesh Patel wrote: > >>> > >>> This series add support for SPL to FU540. U-Boot SPL can boot from > >>> L2 LIM (0x0800_0000) and jump to OpenSBI(FW_DYNAMIC firmware) and > >>> U-Boot proper from MMC devices. > >>> > >>> This series depends on: > >>> [1] https://patchwork.ozlabs.org/patch/1281853 > >>> [2] https://patchwork.ozlabs.org/patch/1281852 > >>> > >>> All these together is available for testing here [3] [3] > >>> https://github.com/pragnesh26992/u-boot/tree/spl > >>> > >>> How to test this patch: > >>> 1) Go to OpenSBI-dir : make PLATFORM=generic FW_DYNAMIC=y > >>> 2) export > >>> OPENSBI= >>> n> > >>> 3) Change to u-boot-dir > >>> 4) make sifive_fu540_defconfig > >>> 5) make all > >>> 6) Format the SD card (make sure the disk has GPT, otherwise use gdisk > >>> to switch) > >>> > >>> # sudo sgdisk --clear \ > >>> > --set-alignment=2 \ > >>> > --new=1:34:2081 --change-name=1:loader1 --typecode=1:5B193300-FC78-40CD-8002-E86C45580B47 \ > >>> > --new=2:2082:10273 --change-name=2:loader2 --typecode=2:2E54B353-1271-4842-806F-E436D6AF6985 \ > >>> > --new=3:10274: --change-name=3:rootfs --typecode=3:0FC63DAF-8483-4772-8E79-3D69D8477DE4 \ > >>> > /dev/sda > >>> > >>> 7) sudo dd if=spl/u-boot-spl.bin of=/dev/sda seek=34 > >>> 8) sudo dd if=u-boot.itb of=/dev/sda seek=2082 > >>> > >>> Changes in v11: > >>> - Remove TPL related code and OF_PLATDATA from FU540 > >>> DDR driver (drivers/ram/sifive/fu540_ddr.c) > >>> - Update FU540 doc (doc/board/sifive/fu540.rst) > >>> Remove unnecessary print > >> > >> Could we get this v11 applied as soon as possible for v2020.07? > > > > No problem, if everything is OK, I will applied ASAP. > > But Jagan seem have some responses, please check about it. > > > >> > >>> This series depends on: > >>> [1] https://patchwork.ozlabs.org/patch/1281853 > >>> [2] https://patchwork.ozlabs.org/patch/1281852 > >> > >> Looks this series "riscv: Add Sipeed Maix support" was not applied neither ? > > > > Yes, the reason is that the CI verification of v10 of this series > > "riscv: Add Sipeed Maix support" still fail. > > Please check the discussion of [v10,20/21] doc: riscv: Add > > documentation for Sipeed Maix Bit > > > > https://patchwork.ozlabs.org/project/uboot/patch/20200503024637.327733-21-seanga2 at gmail.com/ > > > > That is why I still not pull it yet. > > > > Thanks, > > Rick > > I think I have fixed the bug. However, travis is currently failing > during apt with > > E: Failed to fetch https://apt.llvm.org/bionic/dists/llvm-toolchain-bionic-10/main/binary-amd64/Packages.gz File has unexpected size (8765 != 8774). Mirror sync in progress? [IP: 151.101.186.49 443] > Release file created at: Tue, 19 May 2020 21:55:10 +0000 Travis is not stable. Could you please try Azure? > > I will probably submit v11 in the morning, once the llvm repo gets > fixed. Hopefully this will be the last revision :) Regards, Bin