All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH 0/5] Apple M1 Support
@ 2021-09-18 13:54 Mark Kettenis
  2021-09-18 13:54 ` [PATCH 1/5] arm: apple: Add initial support for Apple's M1 SoC Mark Kettenis
                   ` (5 more replies)
  0 siblings, 6 replies; 46+ messages in thread
From: Mark Kettenis @ 2021-09-18 13:54 UTC (permalink / raw)
  To: u-boot
  Cc: Mark Kettenis, Oliver Graute, Michael Walle, Anup Patel,
	Jonathan Balkind, Tianrui Wei, Padmarao Begari,
	Kishon Vijay Abraham I, Stephan Gerhold, Heinrich Schuchardt,
	Simon Glass, Bin Meng, Asherah Connor, Michal Simek, Wasim Khan,
	Ye Li, Igor Opaniuk, Stefan Roese, Minkyu Kang, AKASHI Takahiro,
	Weijie Gao, Vabhav Sharma, Andy Shevchenko, Pratyush Yadav

This series adds basic support for Apple's M1 SoC to U-Boot.
This builds a basic U-Boot that can be used as a payload
for the m1n1 boot loader being developed by the Asahi Linux
project.

The goal here is to privide an UEFI interface on these machines that
allows booting various open source OSes.  This initial series provides
support for the serial port, framebuffer and the USB 3.1 Type-C ports.
It can boot a support OS (e.g. OpenBSD/arm64) from a USB disk.

Mark Kettenis (5):
  arm: apple: Add initial support for Apple's M1 SoC
  serial: s5p: Add Apple M1 support
  misc: Add Apple DART driver
  arm: dts: apple: Add preliminary device trees
  doc: board: apple: Add Apple M1 documentation

 arch/arm/Kconfig                              |  22 +
 arch/arm/Makefile                             |   1 +
 arch/arm/dts/t8103-j274.dts                   | 135 +++++
 arch/arm/dts/t8103-j293.dts                   |  97 ++++
 arch/arm/dts/t8103.dtsi                       | 506 ++++++++++++++++++
 arch/arm/include/asm/arch-m1/clk.h            |  11 +
 arch/arm/include/asm/arch-m1/uart.h           |  41 ++
 arch/arm/mach-apple/Kconfig                   |  18 +
 arch/arm/mach-apple/Makefile                  |   4 +
 arch/arm/mach-apple/board.c                   | 163 ++++++
 arch/arm/mach-apple/lowlevel_init.S           |  16 +
 configs/apple_m1_defconfig                    |  14 +
 doc/board/apple/index.rst                     |   9 +
 doc/board/apple/m1.rst                        |  54 ++
 doc/board/index.rst                           |   1 +
 drivers/misc/Kconfig                          |   7 +
 drivers/misc/Makefile                         |   1 +
 drivers/misc/apple_dart.c                     | 171 ++++++
 drivers/serial/Kconfig                        |   2 +-
 drivers/serial/serial_s5p.c                   |  22 +
 include/configs/apple.h                       |  38 ++
 .../interrupt-controller/apple-aic.h          |  15 +
 include/dt-bindings/pinctrl/apple.h           |  13 +
 include/dt-bindings/spmi/spmi.h               |  10 +
 24 files changed, 1370 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/dts/t8103-j274.dts
 create mode 100644 arch/arm/dts/t8103-j293.dts
 create mode 100644 arch/arm/dts/t8103.dtsi
 create mode 100644 arch/arm/include/asm/arch-m1/clk.h
 create mode 100644 arch/arm/include/asm/arch-m1/uart.h
 create mode 100644 arch/arm/mach-apple/Kconfig
 create mode 100644 arch/arm/mach-apple/Makefile
 create mode 100644 arch/arm/mach-apple/board.c
 create mode 100644 arch/arm/mach-apple/lowlevel_init.S
 create mode 100644 configs/apple_m1_defconfig
 create mode 100644 doc/board/apple/index.rst
 create mode 100644 doc/board/apple/m1.rst
 create mode 100644 drivers/misc/apple_dart.c
 create mode 100644 include/configs/apple.h
 create mode 100644 include/dt-bindings/interrupt-controller/apple-aic.h
 create mode 100644 include/dt-bindings/pinctrl/apple.h
 create mode 100644 include/dt-bindings/spmi/spmi.h

-- 
2.33.0


^ permalink raw reply	[flat|nested] 46+ messages in thread

* [PATCH 1/5] arm: apple: Add initial support for Apple's M1 SoC
  2021-09-18 13:54 [PATCH 0/5] Apple M1 Support Mark Kettenis
@ 2021-09-18 13:54 ` Mark Kettenis
  2021-09-19  1:04   ` Bin Meng
  2021-09-20  3:15   ` Simon Glass
  2021-09-18 13:54 ` [PATCH 2/5] serial: s5p: Add Apple M1 support Mark Kettenis
                   ` (4 subsequent siblings)
  5 siblings, 2 replies; 46+ messages in thread
From: Mark Kettenis @ 2021-09-18 13:54 UTC (permalink / raw)
  To: u-boot
  Cc: Mark Kettenis, Bharat Gooty, Rayagonda Kokatanur, Oliver Graute,
	Bin Meng, Leo Yu-Chi Liang, Tianrui Wei, Stephan Gerhold,
	Padmarao Begari, Kishon Vijay Abraham I, Heinrich Schuchardt,
	Michael Walle, Masami Hiramatsu, Simon Glass, Asherah Connor,
	Wasim Khan, Michal Simek, Igor Opaniuk, Heiko Schocher, Ye Li,
	Stefan Roese, Vabhav Sharma, Marek Behún, Weijie Gao,
	AKASHI Takahiro, Andy Shevchenko, Pratyush Yadav

Add support for Apple's M1 SoC that is used in "Apple Silicon"
Macs.  This builds a basic U-Boot that can be used as a payload
for the m1n1 boot loader being developed by the Asahi Linux
project.

Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
---
 arch/arm/Kconfig                    |  22 ++++
 arch/arm/Makefile                   |   1 +
 arch/arm/mach-apple/Kconfig         |  18 ++++
 arch/arm/mach-apple/Makefile        |   4 +
 arch/arm/mach-apple/board.c         | 158 ++++++++++++++++++++++++++++
 arch/arm/mach-apple/lowlevel_init.S |  16 +++
 configs/apple_m1_defconfig          |  14 +++
 include/configs/apple.h             |  38 +++++++
 8 files changed, 271 insertions(+)
 create mode 100644 arch/arm/mach-apple/Kconfig
 create mode 100644 arch/arm/mach-apple/Makefile
 create mode 100644 arch/arm/mach-apple/board.c
 create mode 100644 arch/arm/mach-apple/lowlevel_init.S
 create mode 100644 configs/apple_m1_defconfig
 create mode 100644 include/configs/apple.h

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index b5bd3284cd..7cdea1f615 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -895,6 +895,26 @@ config ARCH_NEXELL
 	select DM
 	select GPIO_EXTRA_HEADER
 
+config ARCH_APPLE
+	bool "Apple SoCs"
+	select ARM64
+	select LINUX_KERNEL_IMAGE_HEADER
+	select POSITION_INDEPENDENT
+	select BLK
+	select DM
+	select DM_KEYBOARD
+	select DM_SERIAL
+	select DM_USB
+	select DM_VIDEO
+	select CMD_USB
+	select MISC
+	select OF_CONTROL
+	select OF_BOARD
+	select USB
+	imply CMD_DM
+	imply CMD_GPT
+	imply DISTRO_DEFAULTS
+
 config ARCH_OWL
 	bool "Actions Semi OWL SoCs"
 	select DM
@@ -1932,6 +1952,8 @@ config ISW_ENTRY_ADDR
 	  image headers.
 endif
 
+source "arch/arm/mach-apple/Kconfig"
+
 source "arch/arm/mach-aspeed/Kconfig"
 
 source "arch/arm/mach-at91/Kconfig"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index c68e598a67..44178c204b 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -51,6 +51,7 @@ PLATFORM_CPPFLAGS += $(arch-y) $(tune-y)
 
 # Machine directory name.  This list is sorted alphanumerically
 # by CONFIG_* macro name.
+machine-$(CONFIG_ARCH_APPLE)		+= apple
 machine-$(CONFIG_ARCH_ASPEED)		+= aspeed
 machine-$(CONFIG_ARCH_AT91)		+= at91
 machine-$(CONFIG_ARCH_BCM283X)		+= bcm283x
diff --git a/arch/arm/mach-apple/Kconfig b/arch/arm/mach-apple/Kconfig
new file mode 100644
index 0000000000..66cab91b2a
--- /dev/null
+++ b/arch/arm/mach-apple/Kconfig
@@ -0,0 +1,18 @@
+if ARCH_APPLE
+
+config SYS_TEXT_BASE
+	default 0x00000000
+
+config SYS_CONFIG_NAME
+	default "apple"
+
+config SYS_SOC
+	default "m1"
+
+config SYS_MALLOC_LEN
+	default 0x4000000
+
+config SYS_MALLOC_F_LEN
+	default 0x4000
+
+endif
diff --git a/arch/arm/mach-apple/Makefile b/arch/arm/mach-apple/Makefile
new file mode 100644
index 0000000000..e74a8c9df1
--- /dev/null
+++ b/arch/arm/mach-apple/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0+
+
+obj-y += board.o
+obj-y += lowlevel_init.o
diff --git a/arch/arm/mach-apple/board.c b/arch/arm/mach-apple/board.c
new file mode 100644
index 0000000000..0c8b35292e
--- /dev/null
+++ b/arch/arm/mach-apple/board.c
@@ -0,0 +1,158 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2021 Mark Kettenis <kettenis@openbsd.org>
+ */
+
+#include <common.h>
+#include <efi_loader.h>
+
+#include <asm/armv8/mmu.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <asm/system.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static struct mm_region apple_mem_map[] = {
+	{
+		/* I/O */
+		.virt = 0x200000000,
+		.phys = 0x200000000,
+		.size = 8UL * SZ_1G,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE |
+			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	}, {
+		/* I/O */
+		.virt = 0x500000000,
+		.phys = 0x500000000,
+		.size = 2UL * SZ_1G,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE |
+			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	}, {
+		/* I/O */
+		.virt = 0x680000000,
+		.phys = 0x680000000,
+		.size = SZ_512M,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE |
+			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	}, {
+		/* PCIE */
+		.virt = 0x6a0000000,
+		.phys = 0x6a0000000,
+		.size = SZ_512M,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRE) |
+			 PTE_BLOCK_INNER_SHARE |
+			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	}, {
+		/* PCIE */
+		.virt = 0x6c0000000,
+		.phys = 0x6c0000000,
+		.size = SZ_1G,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRE) |
+			 PTE_BLOCK_INNER_SHARE |
+			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	}, {
+		/* RAM */
+		.virt = 0x800000000,
+		.phys = 0x800000000,
+		.size = 8UL * SZ_1G,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+			 PTE_BLOCK_INNER_SHARE
+	}, {
+		/* Empty entry for framebuffer */
+		0,
+	}, {
+		/* List terminator */
+		0,
+	}
+};
+
+struct mm_region *mem_map = apple_mem_map;
+
+int board_init(void)
+{
+	return 0;
+}
+
+int dram_init(void)
+{
+	int index, node, ret;
+	fdt_addr_t base;
+	fdt_size_t size;
+
+	ret = fdtdec_setup_mem_size_base();
+	if (ret)
+		return ret;
+
+	/* Update RAM mapping. */
+	index = ARRAY_SIZE(apple_mem_map) - 3;
+	apple_mem_map[index].virt = gd->ram_base;
+	apple_mem_map[index].phys = gd->ram_base;
+	apple_mem_map[index].size = gd->ram_size;
+
+	node = fdt_path_offset(gd->fdt_blob, "/chosen/framebuffer");
+	if (node < 0)
+		return 0;
+
+	base = fdtdec_get_addr_size(gd->fdt_blob, node, "reg", &size);
+	if (base == FDT_ADDR_T_NONE)
+		return 0;
+
+	/* Add framebuffer mapping. */
+	index = ARRAY_SIZE(apple_mem_map) - 2;
+	apple_mem_map[index].virt = base;
+	apple_mem_map[index].phys = base;
+	apple_mem_map[index].size = size;
+	apple_mem_map[index].attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL_NC) |
+		PTE_BLOCK_INNER_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN;
+
+	return 0;
+}
+
+int dram_init_banksize(void)
+{
+	return fdtdec_setup_memory_banksize();
+}
+
+#define APPLE_WDT_BASE		0x23d2b0000ULL
+
+#define APPLE_WDT_SYS_CTL_ENABLE	BIT(2)
+
+typedef struct apple_wdt {
+	u32	reserved0[3];
+	u32	chip_ctl;
+	u32	sys_tmr;
+	u32	sys_cmp;
+	u32	reserved1;
+	u32	sys_ctl;
+} apple_wdt_t;
+
+void reset_cpu(void)
+{
+	apple_wdt_t *wdt = (apple_wdt_t *)APPLE_WDT_BASE;
+
+	writel(0, &wdt->sys_cmp);
+	writel(APPLE_WDT_SYS_CTL_ENABLE, &wdt->sys_ctl);
+
+	while(1)
+		wfi();
+}
+
+extern long fw_dtb_pointer;
+
+void *board_fdt_blob_setup(void)
+{
+	return (void *)fw_dtb_pointer;
+}
+
+ulong board_get_usable_ram_top(ulong total_size)
+{
+	/*
+	 * Top part of RAM is used by firmware for things like the
+	 * framebuffer.  This gives us plenty of room to play with.
+	 */
+	return 0x980000000;
+}
diff --git a/arch/arm/mach-apple/lowlevel_init.S b/arch/arm/mach-apple/lowlevel_init.S
new file mode 100644
index 0000000000..0f5313163e
--- /dev/null
+++ b/arch/arm/mach-apple/lowlevel_init.S
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2021 Mark Kettenis <kettenis@openbsd.org>
+ */
+
+.align 8
+.global fw_dtb_pointer
+fw_dtb_pointer:
+	.quad	0
+
+.global save_boot_params
+save_boot_params:
+	adr	x1, fw_dtb_pointer
+	str	x0, [x1]
+
+	b	save_boot_params_ret
diff --git a/configs/apple_m1_defconfig b/configs/apple_m1_defconfig
new file mode 100644
index 0000000000..a7ae15576b
--- /dev/null
+++ b/configs/apple_m1_defconfig
@@ -0,0 +1,14 @@
+CONFIG_ARM=y
+CONFIG_ARCH_APPLE=y
+# CONFIG_DISPLAY_CPUINFO is not set
+# CONFIG_MMC is not set
+# CONFIG_NET is not set
+CONFIG_VIDEO_SIMPLE=y
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_KEYBOARD=y
+CONFIG_USB_STORAGE=y
+CONFIG_USE_PREBOOT=y
+CONFIG_PREBOOT="usb start"
+# CONFIG_GENERATE_SMBIOS_TABLE is not set
diff --git a/include/configs/apple.h b/include/configs/apple.h
new file mode 100644
index 0000000000..1c246af002
--- /dev/null
+++ b/include/configs/apple.h
@@ -0,0 +1,38 @@
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <linux/sizes.h>
+
+#define CONFIG_SYS_LOAD_ADDR	0x880000000
+
+#define CONFIG_SYS_SDRAM_BASE	0x880000000
+
+#define CONFIG_LNX_KRNL_IMG_TEXT_OFFSET_BASE	CONFIG_SYS_TEXT_BASE
+
+/* Environment */
+#define ENV_DEVICE_SETTINGS \
+	"stdin=serial,usbkbd\0" \
+	"stdout=serial,vidconsole\0" \
+	"stderr=serial,vidconsole\0"
+
+#define ENV_MEM_LAYOUT_SETTINGS \
+	"fdt_addr_r=0x960100000\0" \
+	"kernel_addr_r=0x960200000\0"
+
+#if CONFIG_IS_ENABLED(CMD_USB)
+	#define BOOT_TARGET_USB(func) func(USB, usb, 0)
+#else
+	#define BOOT_TARGET_USB(func)
+#endif
+
+#define BOOT_TARGET_DEVICES(func) \
+	BOOT_TARGET_USB(func)
+
+#include <config_distro_bootcmd.h>
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	ENV_DEVICE_SETTINGS \
+	ENV_MEM_LAYOUT_SETTINGS \
+	BOOTENV
+
+#endif
-- 
2.33.0


^ permalink raw reply related	[flat|nested] 46+ messages in thread

* [PATCH 2/5] serial: s5p: Add Apple M1 support
  2021-09-18 13:54 [PATCH 0/5] Apple M1 Support Mark Kettenis
  2021-09-18 13:54 ` [PATCH 1/5] arm: apple: Add initial support for Apple's M1 SoC Mark Kettenis
@ 2021-09-18 13:54 ` Mark Kettenis
  2021-09-19  1:11   ` Bin Meng
  2021-09-20  3:15   ` Simon Glass
  2021-09-18 13:54 ` [PATCH 3/5] misc: Add Apple DART driver Mark Kettenis
                   ` (3 subsequent siblings)
  5 siblings, 2 replies; 46+ messages in thread
From: Mark Kettenis @ 2021-09-18 13:54 UTC (permalink / raw)
  To: u-boot
  Cc: Mark Kettenis, Oliver Graute, Leo Yu-Chi Liang,
	Kishon Vijay Abraham I, Priyanka Jain, Stephan Gerhold,
	Padmarao Begari, Tianrui Wei, Michael Walle, Heinrich Schuchardt,
	Simon Glass, Asherah Connor, Bin Meng, Michal Simek, Wasim Khan,
	Ye Li, Igor Opaniuk, Stefan Roese, AKASHI Takahiro,
	Vabhav Sharma, Weijie Gao, Pratyush Yadav, Andy Shevchenko

Apple M1 SoCs include an S5L UART which is a variant of the S5P
UART.  Add support for this variant and enable it by default
on Apple SoCs.

Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
---
 arch/arm/include/asm/arch-m1/clk.h  | 11 ++++++++
 arch/arm/include/asm/arch-m1/uart.h | 41 +++++++++++++++++++++++++++++
 arch/arm/mach-apple/board.c         |  5 ++++
 drivers/serial/Kconfig              |  2 +-
 drivers/serial/serial_s5p.c         | 22 ++++++++++++++++
 5 files changed, 80 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/include/asm/arch-m1/clk.h
 create mode 100644 arch/arm/include/asm/arch-m1/uart.h

diff --git a/arch/arm/include/asm/arch-m1/clk.h b/arch/arm/include/asm/arch-m1/clk.h
new file mode 100644
index 0000000000..f4326d0c0f
--- /dev/null
+++ b/arch/arm/include/asm/arch-m1/clk.h
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2021 Mark Kettenis <kettenis@openbsd.org>
+ */
+
+#ifndef __ASM_ARM_ARCH_CLK_H_
+#define __ASM_ARM_ARCH_CLK_H_
+
+unsigned long get_uart_clk(int dev_index);
+
+#endif
diff --git a/arch/arm/include/asm/arch-m1/uart.h b/arch/arm/include/asm/arch-m1/uart.h
new file mode 100644
index 0000000000..d2a17a221e
--- /dev/null
+++ b/arch/arm/include/asm/arch-m1/uart.h
@@ -0,0 +1,41 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2009 Samsung Electronics
+ * Minkyu Kang <mk7.kang@samsung.com>
+ * Heungjun Kim <riverful.kim@samsung.com>
+ */
+
+#ifndef __ASM_ARCH_UART_H_
+#define __ASM_ARCH_UART_H_
+
+#ifndef __ASSEMBLY__
+/* baudrate rest value */
+union br_rest {
+	unsigned short	slot;		/* udivslot */
+	unsigned char	value;		/* ufracval */
+};
+
+struct s5p_uart {
+	unsigned int	ulcon;
+	unsigned int	ucon;
+	unsigned int	ufcon;
+	unsigned int	umcon;
+	unsigned int	utrstat;
+	unsigned int	uerstat;
+	unsigned int	ufstat;
+	unsigned int	umstat;
+	unsigned int	utxh;
+	unsigned int	urxh;
+	unsigned int	ubrdiv;
+	union br_rest	rest;
+	unsigned char	res3[0x3fd0];
+};
+
+static inline int s5p_uart_divslot(void)
+{
+	return 0;
+}
+
+#endif	/* __ASSEMBLY__ */
+
+#endif
diff --git a/arch/arm/mach-apple/board.c b/arch/arm/mach-apple/board.c
index 0c8b35292e..8bc5c2f69e 100644
--- a/arch/arm/mach-apple/board.c
+++ b/arch/arm/mach-apple/board.c
@@ -156,3 +156,8 @@ ulong board_get_usable_ram_top(ulong total_size)
 	 */
 	return 0x980000000;
 }
+
+unsigned long get_uart_clk(int dev_index)
+{
+	return 24000000;
+}
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 93348c0929..c3ac773929 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -719,7 +719,7 @@ config ROCKCHIP_SERIAL
 
 config S5P_SERIAL
 	bool "Support for Samsung S5P UART"
-	depends on ARCH_EXYNOS || ARCH_S5PC1XX
+	depends on ARCH_APPLE || ARCH_EXYNOS || ARCH_S5PC1XX
 	default y
 	help
 	  Select this to enable Samsung S5P UART support.
diff --git a/drivers/serial/serial_s5p.c b/drivers/serial/serial_s5p.c
index 6d09952a5d..eb770d9b62 100644
--- a/drivers/serial/serial_s5p.c
+++ b/drivers/serial/serial_s5p.c
@@ -21,12 +21,21 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+#ifdef CONFIG_ARCH_APPLE
+#define RX_FIFO_COUNT_SHIFT	0
+#define RX_FIFO_COUNT_MASK	(0xf << RX_FIFO_COUNT_SHIFT)
+#define RX_FIFO_FULL		(1 << 8)
+#define TX_FIFO_COUNT_SHIFT	4
+#define TX_FIFO_COUNT_MASK	(0xf << TX_FIFO_COUNT_SHIFT)
+#define TX_FIFO_FULL		(1 << 9)
+#else
 #define RX_FIFO_COUNT_SHIFT	0
 #define RX_FIFO_COUNT_MASK	(0xff << RX_FIFO_COUNT_SHIFT)
 #define RX_FIFO_FULL		(1 << 8)
 #define TX_FIFO_COUNT_SHIFT	16
 #define TX_FIFO_COUNT_MASK	(0xff << TX_FIFO_COUNT_SHIFT)
 #define TX_FIFO_FULL		(1 << 24)
+#endif
 
 /* Information about a serial port */
 struct s5p_serial_plat {
@@ -83,7 +92,11 @@ static void __maybe_unused s5p_serial_baud(struct s5p_uart *uart, uint uclk,
 	if (s5p_uart_divslot())
 		writew(udivslot[val % 16], &uart->rest.slot);
 	else
+#ifdef CONFIG_ARCH_APPLE
+		writel(val % 16, &uart->rest.value);
+#else
 		writeb(val % 16, &uart->rest.value);
+#endif
 }
 
 #ifndef CONFIG_SPL_BUILD
@@ -148,7 +161,11 @@ static int s5p_serial_getc(struct udevice *dev)
 		return -EAGAIN;
 
 	serial_err_check(uart, 0);
+#ifdef CONFIG_ARCH_APPLE
+	return (int)(readl(&uart->urxh) & 0xff);
+#else
 	return (int)(readb(&uart->urxh) & 0xff);
+#endif
 }
 
 static int s5p_serial_putc(struct udevice *dev, const char ch)
@@ -159,7 +176,11 @@ static int s5p_serial_putc(struct udevice *dev, const char ch)
 	if (readl(&uart->ufstat) & TX_FIFO_FULL)
 		return -EAGAIN;
 
+#ifdef CONFIG_ARCH_APPLE
+	writel(ch, &uart->utxh);
+#else
 	writeb(ch, &uart->utxh);
+#endif
 	serial_err_check(uart, 1);
 
 	return 0;
@@ -201,6 +222,7 @@ static const struct dm_serial_ops s5p_serial_ops = {
 
 static const struct udevice_id s5p_serial_ids[] = {
 	{ .compatible = "samsung,exynos4210-uart" },
+	{ .compatible = "apple,s5l-uart" },
 	{ }
 };
 
-- 
2.33.0


^ permalink raw reply related	[flat|nested] 46+ messages in thread

* [PATCH 3/5] misc: Add Apple DART driver
  2021-09-18 13:54 [PATCH 0/5] Apple M1 Support Mark Kettenis
  2021-09-18 13:54 ` [PATCH 1/5] arm: apple: Add initial support for Apple's M1 SoC Mark Kettenis
  2021-09-18 13:54 ` [PATCH 2/5] serial: s5p: Add Apple M1 support Mark Kettenis
@ 2021-09-18 13:54 ` Mark Kettenis
  2021-09-20  3:16   ` Simon Glass
  2021-09-18 13:54 ` [PATCH 4/5] arm: dts: apple: Add preliminary device trees Mark Kettenis
                   ` (2 subsequent siblings)
  5 siblings, 1 reply; 46+ messages in thread
From: Mark Kettenis @ 2021-09-18 13:54 UTC (permalink / raw)
  To: u-boot
  Cc: Mark Kettenis, Oliver Graute, Stephan Gerhold, Masami Hiramatsu,
	Priyanka Jain, Leo Yu-Chi Liang, Padmarao Begari, Michael Walle,
	Kishon Vijay Abraham I, Heinrich Schuchardt, Simon Glass,
	Bin Meng, Asherah Connor, Michal Simek, Wasim Khan,
	Heiko Schocher, Igor Opaniuk, Ye Li, Stefan Roese,
	AKASHI Takahiro, Weijie Gao, Vabhav Sharma, Andy Shevchenko,
	Pratyush Yadav

The DART is an IOMMU that is used on Apple's M1 SoC.  This driver
supports the DART in bypass mode as well as in a mode where it
creates a 1:1 mapping of a subset of RAM as not all DARTs support
bypass mode.  The USB3 ports integrated on the SoC use a DART
that supports bypass mode.  The 1:1 mapping will be used in the
future to support other devices such as the PCIe host bridge
of the M1 SoC.

Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
---
 drivers/misc/Kconfig      |   7 ++
 drivers/misc/Makefile     |   1 +
 drivers/misc/apple_dart.c | 171 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 179 insertions(+)
 create mode 100644 drivers/misc/apple_dart.c

diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 997b713221..d70b060e74 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -38,6 +38,13 @@ config ALTERA_SYSID
 	  Select this to enable a sysid for Altera devices. Please find
 	  details on the "Embedded Peripherals IP User Guide" of Altera.
 
+config APPLE_DART
+	bool "Apple DART support"
+	depends on MISC && ARCH_APPLE
+	default y
+	help
+	  Enable support for the DART on Apple SoCs.
+
 config ATSHA204A
 	bool "Support for Atmel ATSHA204A module"
 	depends on MISC
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index b64cd2a4de..f666cd392d 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -29,6 +29,7 @@ endif
 endif
 obj-$(CONFIG_ALI152X) += ali512x.o
 obj-$(CONFIG_ALTERA_SYSID) += altera_sysid.o
+obj-$(CONFIG_APPLE_DART) += apple_dart.o
 obj-$(CONFIG_ATSHA204A) += atsha204a-i2c.o
 obj-$(CONFIG_CBMEM_CONSOLE) += cbmem_console.o
 obj-$(CONFIG_DS4510)  += ds4510.o
diff --git a/drivers/misc/apple_dart.c b/drivers/misc/apple_dart.c
new file mode 100644
index 0000000000..f619a624d0
--- /dev/null
+++ b/drivers/misc/apple_dart.c
@@ -0,0 +1,171 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2021 Mark Kettenis <kettenis@openbsd.org>
+ */
+
+#include <common.h>
+#include <clk.h>
+#include <cpu_func.h>
+#include <dm.h>
+#include <mapmem.h>
+#include <asm/io.h>
+
+#define DART_PARAMS2		0x0004
+#define  DART_PARAMS2_BYPASS_SUPPORT	BIT(0)
+#define DART_TLB_OP		0x0020
+#define  DART_TLB_OP_OPMASK	(0xfff << 20)
+#define  DART_TLB_OP_FLUSH	(0x001 << 20)
+#define  DART_TLB_OP_BUSY	BIT(2)
+#define DART_TLB_OP_SIDMASK	0x0034
+#define DART_ERROR_STATUS	0x0040
+#define DART_TCR(sid)		(0x0100 + 4 * (sid))
+#define  DART_TCR_TRANSLATE_ENABLE	BIT(7)
+#define  DART_TCR_BYPASS_DART		BIT(8)
+#define  DART_TCR_BYPASS_DAPF		BIT(12)
+#define DART_TTBR(sid, idx)	(0x0200 + 16 * (sid) + 4 * (idx))
+#define  DART_TTBR_VALID	BIT(31)
+#define  DART_TTBR_SHIFT	12
+
+struct apple_dart_priv {
+	struct clk_bulk clks;
+	void *base;
+};
+
+dma_addr_t apple_dart_bus_start;
+phys_addr_t apple_dart_phys_start;
+phys_size_t apple_dart_size = SZ_512M;
+
+static void apple_dart_flush_tlb(struct apple_dart_priv *priv)
+{
+	u32 status;
+
+	writel(0xffffffff, priv->base + DART_TLB_OP_SIDMASK);
+	writel(DART_TLB_OP_FLUSH, priv->base + DART_TLB_OP);
+
+	for (;;) {
+		status = readl(priv->base + DART_TLB_OP);
+		if ((status & DART_TLB_OP_OPMASK) == 0)
+			break;
+		if ((status & DART_TLB_OP_BUSY) == 0)
+			break;
+	}
+}
+
+static int apple_dart_clk_init(struct udevice *dev,
+			       struct apple_dart_priv *priv)
+{
+	int ret;
+
+	ret = clk_get_bulk(dev, &priv->clks);
+	if (ret == -ENOSYS || ret == -ENOENT)
+		return 0;
+	if (ret)
+		return ret;
+
+	ret = clk_enable_bulk(&priv->clks);
+	if (ret) {
+		clk_release_bulk(&priv->clks);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int apple_dart_bind(struct udevice *dev)
+{
+	void *base;
+	int sid, i;
+
+	base = dev_read_addr_ptr(dev);
+	if (!base)
+		return -EINVAL;
+
+	u32 params2 = readl(base + DART_PARAMS2);
+	if (params2 & DART_PARAMS2_BYPASS_SUPPORT) {
+		for (sid = 0; sid < 16; sid++) {
+			writel(DART_TCR_BYPASS_DART | DART_TCR_BYPASS_DAPF,
+			       base + DART_TCR(sid));
+			for (i = 0; i < 4; i++)
+				writel(0, base + DART_TTBR(sid, i));
+		}
+	}
+
+	return 0;
+}
+
+static int apple_dart_probe(struct udevice *dev)
+{
+	struct apple_dart_priv *priv = dev_get_priv(dev);
+	phys_addr_t phys;
+	u64 *l1, *l2;
+	int sid, i, j;
+	int ret;
+
+	apple_dart_phys_start = gd->ram_top - apple_dart_size;
+
+	priv->base = dev_read_addr_ptr(dev);
+	if (!priv->base)
+		return -EINVAL;
+
+	ret = apple_dart_clk_init(dev, priv);
+	if (ret)
+		return ret;
+
+	l1 = memalign(SZ_64K, SZ_64K);
+	memset(l1, 0, SZ_64K);
+
+	i = 0;
+	phys = apple_dart_phys_start;
+	while (phys < apple_dart_phys_start + apple_dart_size) {
+		l2 = memalign(SZ_16K, SZ_16K);
+		memset(l2, 0, SZ_16K);
+
+		for (j = 0; j < 2048; j++) {
+			l2[j] = phys | 0x3;
+			phys += SZ_16K;
+		}
+		flush_dcache_range((unsigned long)l2,
+				   (unsigned long)l2 + SZ_16K);
+
+		l1[i++] = (phys_addr_t)l2 | 0x8 | 0x3;
+	}
+
+	flush_dcache_range((unsigned long)l1, (unsigned long)l1 + SZ_64K);
+
+	for (sid = 0; sid < 16; sid++) {
+		for (i = 0; i < 4; i++)
+			writel(0, priv->base + DART_TTBR(sid, i));
+	}
+
+	apple_dart_flush_tlb(priv);
+
+	for (sid = 0; sid < 16; sid++) {
+		phys = (phys_addr_t)l1;
+		for (i = 0; i < 4; i++) {
+			writel((phys >> DART_TTBR_SHIFT) | DART_TTBR_VALID,
+			       priv->base + DART_TTBR(sid, i));
+			phys += SZ_16K;
+		}
+	}
+
+	apple_dart_flush_tlb(priv);
+
+	for (sid = 0; sid < 16; sid++)
+		writel(DART_TCR_TRANSLATE_ENABLE, priv->base + DART_TCR(sid));
+
+	return 0;
+}
+
+static const struct udevice_id apple_dart_ids[] = {
+	{ .compatible = "apple,t8103-dart" },
+	{ /* sentinel */ }
+};
+
+U_BOOT_DRIVER(apple_dart) = {
+	.name = "apple_dart",
+	.id = UCLASS_MISC,
+	.of_match = apple_dart_ids,
+	.priv_auto = sizeof(struct apple_dart_priv),
+	.bind = apple_dart_bind,
+	.probe = apple_dart_probe
+};
-- 
2.33.0


^ permalink raw reply related	[flat|nested] 46+ messages in thread

* [PATCH 4/5] arm: dts: apple: Add preliminary device trees
  2021-09-18 13:54 [PATCH 0/5] Apple M1 Support Mark Kettenis
                   ` (2 preceding siblings ...)
  2021-09-18 13:54 ` [PATCH 3/5] misc: Add Apple DART driver Mark Kettenis
@ 2021-09-18 13:54 ` Mark Kettenis
  2021-09-20  3:16   ` Simon Glass
  2021-09-18 13:54 ` [PATCH 5/5] doc: board: apple: Add Apple M1 documentation Mark Kettenis
  2021-09-25  1:20 ` [PATCH 0/5] Apple M1 Support Simon Glass
  5 siblings, 1 reply; 46+ messages in thread
From: Mark Kettenis @ 2021-09-18 13:54 UTC (permalink / raw)
  To: u-boot
  Cc: Mark Kettenis, Oliver Graute, Leo Yu-Chi Liang, Anup Patel,
	Bin Meng, Kishon Vijay Abraham I, Stephan Gerhold, Tianrui Wei,
	Heinrich Schuchardt, Simon Glass, Asherah Connor, Michal Simek,
	Wasim Khan, Igor Opaniuk, Ye Li, Stefan Roese, Vabhav Sharma,
	Marek Behún, Weijie Gao, AKASHI Takahiro, Andy Shevchenko,
	Pratyush Yadav

Add preliminary device trees for the Apple M1 mini (2020) and
Apple M1 Macbook Pro 13" (2020).  Device tree bindings for
the Apple M1 SoC are still being formalized and these device
trees will be synchronized with the Linux kernel as needed.

These device trees are provided as a reference only as U-Boot
uses the device tree passed by the m1n1 bootloader.

Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
---
 arch/arm/dts/t8103-j274.dts                   | 135 +++++
 arch/arm/dts/t8103-j293.dts                   |  97 ++++
 arch/arm/dts/t8103.dtsi                       | 506 ++++++++++++++++++
 .../interrupt-controller/apple-aic.h          |  15 +
 include/dt-bindings/pinctrl/apple.h           |  13 +
 include/dt-bindings/spmi/spmi.h               |  10 +
 6 files changed, 776 insertions(+)
 create mode 100644 arch/arm/dts/t8103-j274.dts
 create mode 100644 arch/arm/dts/t8103-j293.dts
 create mode 100644 arch/arm/dts/t8103.dtsi
 create mode 100644 include/dt-bindings/interrupt-controller/apple-aic.h
 create mode 100644 include/dt-bindings/pinctrl/apple.h
 create mode 100644 include/dt-bindings/spmi/spmi.h

diff --git a/arch/arm/dts/t8103-j274.dts b/arch/arm/dts/t8103-j274.dts
new file mode 100644
index 0000000000..aef1ae29b6
--- /dev/null
+++ b/arch/arm/dts/t8103-j274.dts
@@ -0,0 +1,135 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple Mac mini (M1, 2020)
+ *
+ * target-type: J274
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t8103.dtsi"
+
+/ {
+	compatible = "apple,j274", "apple,t8103", "apple,arm-platform";
+	model = "Apple Mac mini (M1, 2020)";
+
+	aliases {
+		serial0 = &serial0;
+		ethernet0 = &eth0;
+		wifi0 = &wifi0;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		stdout-path = "serial0";
+
+		framebuffer0: framebuffer@0 {
+			compatible = "apple,simple-framebuffer", "simple-framebuffer";
+			reg = <0 0 0 0>; /* To be filled by loader */
+			/* Format properties will be added by loader */
+			status = "disabled";
+		};
+	};
+
+	memory@800000000 {
+		device_type = "memory";
+		reg = <0x8 0 0x2 0>; /* To be filled by loader */
+	};
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&pcie0_dart_0 {
+	status = "okay";
+};
+
+&pcie0_dart_1 {
+	status = "okay";
+};
+
+&pcie0_dart_2 {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+
+	pci0: pci@0,0 {
+		device_type = "pci";
+		reg = <0x0 0x0 0x0 0x0 0x0>;
+		pwren-gpios = <&smc 13 0>;
+		reset-gpios = <&pinctrl_ap 152 0>;
+		max-link-speed = <2>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
+	};
+
+	pci1: pci@1,0 {
+		device_type = "pci";
+		reg = <0x800 0x0 0x0 0x0 0x0>;
+		reset-gpios = <&pinctrl_ap 153 0>;
+		max-link-speed = <2>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
+	};
+
+	pci2: pci@2,0 {
+		device_type = "pci";
+		reg = <0x1000 0x0 0x0 0x0 0x0>;
+		reset-gpios = <&pinctrl_ap 33 0>;
+		max-link-speed = <1>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
+	};
+};
+
+&pci0 {
+	wifi0: network@0,0 {
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+		local-mac-address = [00 00 00 00 00 00];
+	};
+};
+
+&pci2 {
+	eth0: ethernet@0,0 {
+		reg = <0x30000 0x0 0x0 0x0 0x0>;
+		local-mac-address = [00 00 00 00 00 00];
+	};
+};
+
+&dwc3_0_dart_0 {
+	status = "okay";
+};
+
+&dwc3_0_dart_1 {
+	status = "okay";
+};
+
+&dwc3_0 {
+	status = "okay";
+};
+
+&dwc3_1_dart_0 {
+	status = "okay";
+};
+
+&dwc3_1_dart_1 {
+	status = "okay";
+};
+
+&dwc3_1 {
+	status = "okay";
+};
diff --git a/arch/arm/dts/t8103-j293.dts b/arch/arm/dts/t8103-j293.dts
new file mode 100644
index 0000000000..4a22596cf4
--- /dev/null
+++ b/arch/arm/dts/t8103-j293.dts
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple Macbook Pro (M1, 2020)
+ *
+ * target-type: J293
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t8103.dtsi"
+
+/ {
+	compatible = "apple,j293", "apple,t8103", "apple,arm-platform";
+	model = "Apple Macbook Pro (M1, 2020)";
+
+	aliases {
+		serial0 = &serial0;
+		wifi0 = &wifi0;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		stdout-path = "serial0";
+
+		framebuffer0: framebuffer@0 {
+			compatible = "apple,simple-framebuffer", "simple-framebuffer";
+			reg = <0 0 0 0>; /* To be filled by loader */
+			/* Format properties will be added by loader */
+			status = "disabled";
+		};
+	};
+
+	memory@800000000 {
+		device_type = "memory";
+		reg = <0x8 0 0x2 0>; /* To be filled by loader */
+	};
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&pcie0_dart_0 {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+
+	pci0: pci@0,0 {
+		device_type = "pci";
+		reg = <0x0 0x0 0x0 0x0 0x0>;
+		pwren-gpios = <&smc 13 0>;
+		reset-gpios = <&pinctrl_ap 152 0>;
+		max-link-speed = <2>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
+	};
+};
+
+&pci0 {
+	wifi0: network@0,0 {
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+		local-mac-address = [00 00 00 00 00 00];
+	};
+};
+
+&dwc3_0_dart_0 {
+	status = "okay";
+};
+
+&dwc3_0_dart_1 {
+	status = "okay";
+};
+
+&dwc3_0 {
+	status = "okay";
+};
+
+&dwc3_1_dart_0 {
+	status = "okay";
+};
+
+&dwc3_1_dart_1 {
+	status = "okay";
+};
+
+&dwc3_1 {
+	status = "okay";
+};
diff --git a/arch/arm/dts/t8103.dtsi b/arch/arm/dts/t8103.dtsi
new file mode 100644
index 0000000000..6074fc9080
--- /dev/null
+++ b/arch/arm/dts/t8103.dtsi
@@ -0,0 +1,506 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T8103 "M1" SoC
+ *
+ * Other names: H13G, "Tonga"
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/apple-aic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/apple.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	compatible = "apple,t8103", "apple,arm-platform";
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "apple,icestorm";
+			device_type = "cpu";
+			reg = <0x0 0x0>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+		};
+
+		cpu1: cpu@1 {
+			compatible = "apple,icestorm";
+			device_type = "cpu";
+			reg = <0x0 0x1>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+		};
+
+		cpu2: cpu@2 {
+			compatible = "apple,icestorm";
+			device_type = "cpu";
+			reg = <0x0 0x2>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+		};
+
+		cpu3: cpu@3 {
+			compatible = "apple,icestorm";
+			device_type = "cpu";
+			reg = <0x0 0x3>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+		};
+
+		cpu4: cpu@10100 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10100>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+		};
+
+		cpu5: cpu@10101 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10101>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+		};
+
+		cpu6: cpu@10102 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10102>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+		};
+
+		cpu7: cpu@10103 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10103>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&aic>;
+		interrupt-names = "hyp-phys", "hyp-virt", "phys", "virt";
+		interrupts = <AIC_FIQ AIC_TMR_HV_PHYS IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_FIQ AIC_TMR_HV_VIRT IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_FIQ AIC_TMR_GUEST_PHYS IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_FIQ AIC_TMR_GUEST_VIRT IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	clk24: clock-24m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "clk24";
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		ranges;
+		dma-ranges;
+		dma-coherent;
+		nonposted-mmio;
+
+		aic: interrupt-controller@23b100000 {
+			compatible = "apple,t8103-aic", "apple,aic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x2 0x3b100000 0x0 0x8000>;
+		};
+
+		serial0: serial@235200000 {
+			compatible = "apple,s5l-uart";
+			reg = <0x2 0x35200000 0x0 0x1000>;
+			reg-io-width = <4>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 605 IRQ_TYPE_LEVEL_HIGH>;
+			/*
+			 * TODO: figure out the clocking properly, there may
+			 * be a third selectable clock.
+			 */
+			clocks = <&clk24>, <&clk24>;
+			clock-names = "uart", "clk_uart_baud0";
+			status = "disabled";
+		};
+
+		gpio_clk: clock@23b700130 {
+			compatible = "apple,pmgr-clk-gate";
+			reg = <0x2 0x3b700130 0x0 0x8>;
+			#clock-cells = <0>;
+		};
+
+		pinctrl_ap: pinctrl@23c100000 {
+			compatible = "apple,t8103-pinctrl", "apple,pinctrl";
+			reg = <0x2 0x3c100000 0x0 0x100000>;
+			clocks = <&gpio_clk>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_ap 0 0 212>;
+
+			interrupt-controller;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 192 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 193 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 194 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 195 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 196 IRQ_TYPE_LEVEL_HIGH>;
+
+			i2c0_pins: i2c0_pins {
+				pinmux = <APPLE_PINMUX(188, 1)>,
+					 <APPLE_PINMUX(192, 1)>;
+			};
+
+			pcie_pins: pcie-pins {
+				pinmux = <APPLE_PINMUX(150, 1)>,
+				         <APPLE_PINMUX(151, 1)>,
+					 <APPLE_PINMUX(32, 1)>;
+			};
+		};
+
+		pinctrl_aop: pinctrl@24a820000 {
+			compatible = "apple,t8103-pinctrl", "apple,pinctrl";
+			reg = <0x2 0x4a820000 0x0 0x4000>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_aop 0 0 42>;
+
+			interrupt-controller;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 268 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 269 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 270 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 271 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 272 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 273 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 274 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_nub: pinctrl@23d1f0000 {
+			compatible = "apple,t8103-pinctrl", "apple,pinctrl";
+			reg = <0x2 0x3d1f0000 0x0 0x4000>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_nub 0 0 23>;
+
+			interrupt-controller;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 336 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_smc: pinctrl@23e820000 {
+			compatible = "apple,t8103-pinctrl", "apple,pinctrl";
+			reg = <0x2 0x3e820000 0x0 0x4000>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_smc 0 0 16>;
+
+			interrupt-controller;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 391 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 392 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 393 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 394 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 395 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 396 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 397 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		sio_busif_clk: clock@23b7001c0 {
+			compatible = "apple,pmgr-clk-gate";
+			reg = <0x2 0x3b7001c0 0x0 0x8>;
+			#clock-cells = <0>;
+			clocks = <&clk24>;
+		};
+
+		sio_clk: clock@23b7001c8 {
+			compatible = "apple,pmgr-clk-gate";
+			reg = <0x2 0x3b7001c8 0x0 0x8>;
+			#clock-cells = <0>;
+			clocks = <&sio_busif_clk>;
+		};
+
+		i2c0_clk: clock@23b7001f0 {
+			compatible = "apple,pmgr-clk-gate";
+			reg = <0x2 0x3b7001f0 0x0 0x8>;
+			#clock-cells = <0>;
+			clocks = <&sio_clk>;
+		};
+
+		i2c0: i2c@20a110000 {
+			compatible = "apple,i2c-v0";
+			reg = <0x2 0x35010000 0x0 0x4000>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 627 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&i2c0_clk>;
+			pinctrl-0 = <&i2c0_pins>;
+			pinctrl-names = "default";
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+
+			hpm0: hpm@38 {
+				compatible = "ti,tps6598x";
+				reg = <0x38>;
+			};
+
+			hpm1: hpm@3f {
+				compatible = "ti,tps6598x";
+				reg = <0x3f>;
+			};
+                };
+
+		imx_clk: clock@23b7001b8 {
+			compatible = "apple,pmgr-clk-gate";
+			reg = <0x2 0x3b7001b8 0x0 0x8>;
+			#clock-cells = <0>;
+		};
+
+		pcie_aux_clk: clock@23b700348 {
+			compatible = "apple,pmgr-clk-gate";
+			reg = <0x2 0x3b700348 0x0 0x8>;
+			#clock-cells = <0>;
+			clocks = <&imx_clk>;
+		};
+
+		pcie_core_clk: clock@23b7003e8 {
+			compatible = "apple,pmgr-clk-gate";
+			reg = <0x2 0x3b7003e8 0x0 0x8>;
+			#clock-cells = <0>;
+			clocks = <&pcie_aux_clk>;
+		};
+
+		pcie_ref_clk: clock@23b7001a0 {
+			compatible = "apple,pmgr-clk-gate";
+			reg = <0x2 0x3b7001a0 0x0 0x8>;
+			#clock-cells = <0>;
+		};
+
+		ans_clk: clock@23b7003f0 {
+			compatible = "apple,pmgr-clk-gate";
+			reg = <0x2 0x3b7003f0 0x0 0x8>;
+			#clock-cells = <0>;
+			clocks = <&pcie_aux_clk>;
+		};
+
+		ans_st_clk: clock@23b700418 {
+			compatible = "apple,pmgr-clk-gate";
+			reg = <0x2 0x3b700418 0x0 0x8>;
+			#clock-cells = <0>;
+			clocks = <&ans_clk>;
+		};
+
+		ans_mbox: mbox@277400000 {
+			compatible = "apple,iop-mailbox-m1";
+			reg = <0x2 0x77400000 0x0 0x20000>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 583 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 586 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ans_st_clk>;
+			#mbox-cells = <1>;
+			endpoints = <32>;
+		};
+
+		ans@27bcc0000 {
+			compatible = "apple,nvme-m1";
+			reg = <0x2 0x7bcc0000 0x0 0x40000>,
+			      <0x2 0x7bc50000 0x0 0x4000>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 590 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ans_st_clk>;
+			mboxes = <&ans_mbox 32>;
+		};
+
+		pcie0_dart_0: iommu@681008000 {
+			compatible = "apple,t8103-dart", "apple,dart-m1";
+			reg = <0x6 0x81008000 0x0 0x4000>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 696 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		pcie0_dart_1: iommu@682008000 {
+			compatible = "apple,t8103-dart", "apple,dart-m1";
+			reg = <0x6 0x82008000 0x0 0x4000>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 699 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		pcie0_dart_2: iommu@683008000 {
+			compatible = "apple,t8103-dart", "apple,dart-m1";
+			reg = <0x6 0x83008000 0x0 0x4000>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 702 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		smc_mbox: mbox@23e400000 {
+			compatible = "apple,iop-mailbox-m1";
+			reg = <0x2 0x3e400000 0x0 0x20000>;
+			#mbox-cells = <1>;
+			endpoints = <32>;
+		};
+
+		smc: smc@23e050000 {
+			compatible = "apple,smc-m1";
+			reg = <0x2 0x3e050000 0x0 0x4000>;
+			mboxes = <&smc_mbox 32>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-13 = <0x00800000>;
+		};
+
+		pcie0: pcie@690000000 {
+			compatible = "apple,t8103-pcie", "apple,pcie";
+
+			reg = <0x6 0x90000000 0x0 0x1000000>,
+			      <0x6 0x80000000 0x0 0x4000>,
+			      <0x6 0x81000000 0x0 0x8000>,
+			      <0x6 0x82000000 0x0 0x8000>,
+			      <0x6 0x83000000 0x0 0x8000>;
+			reg-names = "config", "rc", "port0", "port1", "port2";
+
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 695 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 698 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 701 IRQ_TYPE_LEVEL_HIGH>;
+
+			msi-controller;
+			msi-parent = <&pcie0>;
+			msi-ranges = <&aic AIC_IRQ 704 IRQ_TYPE_EDGE_RISING 32>;
+
+			iommu-map = <0x100 &pcie0_dart_0 1 1>,
+				    <0x200 &pcie0_dart_1 1 1>,
+				    <0x300 &pcie0_dart_2 1 1>;
+			iommu-map-mask = <0xff00>;
+
+			bus-range = <0 3>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges = <0x43000000 0x6 0xa0000000 0x6 0xa0000000
+			          0x0 0x20000000>,
+				 <0x02000000 0x0 0xc0000000 0x6 0xc0000000
+				  0x0 0x40000000>;
+
+			clocks = <&pcie_core_clk>, <&pcie_aux_clk>,
+				 <&pcie_ref_clk>;
+			pinctrl-0 = <&pcie_pins>;
+			pinctrl-names = "default";
+
+			device_type = "pci";
+			status = "disabled";
+		};
+
+		dwc3_0_dart_0: iommu@382f00000 {
+			compatible = "apple,t8103-dart";
+			reg = <0x3 0x82f00000 0x0 0x4000>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 781 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		dwc3_0_dart_1: iommu@382f80000 {
+			compatible = "apple,t8103-dart";
+			reg = <0x3 0x82f80000 0x0 0x4000>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 781 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		dwc3_0: usb@382280000{
+			compatible = "snps,dwc3";
+			reg = <0x3 0x82280000 0x0 0x100000>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 777 IRQ_TYPE_LEVEL_HIGH>;
+			dr_mode = "host";
+			iommus = <&dwc3_0_dart_0 0>, <&dwc3_0_dart_1 1>;
+			status = "disabled";
+		};
+
+		dwc3_1_dart_0: iommu@502f00000 {
+			compatible = "apple,t8103-dart";
+			reg = <0x5 0x02f00000 0x0 0x4000>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 861 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		dwc3_1_dart_1: iommu@502f80000 {
+			compatible = "apple,t8103-dart";
+			reg = <0x5 0x02f80000 0x0 0x4000>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 861 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		dwc3_1: usb@502280000{
+			compatible = "snps,dwc3";
+			reg = <0x5 0x02280000 0x0 0x100000>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 857 IRQ_TYPE_LEVEL_HIGH>;
+			dr_mode = "host";
+			iommus = <&dwc3_1_dart_0 0>, <&dwc3_1_dart_1 1>;
+			status = "disabled";
+		};
+
+		reboot@23d2b0000 {
+			compatible = "apple,reboot-v0";
+			reg = <0x2 0x3d2b0000 0x0 0x4000>;
+		};
+
+		spi@23510c000 {
+			compatible = "apple,t8103-spi", "apple,spi";
+			reg = <0x2 0x3510c000 0x0 0x4000>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 617 IRQ_TYPE_LEVEL_HIGH>;
+			cs-gpios = <&pinctrl_ap 49 GPIO_ACTIVE_HIGH>;
+		};
+
+		spmi@23d0d8000 {
+			compatible = "apple,t8103-spmi", "apple,spmi";
+			reg = <0x2 0x3d0d9300 0x0 0x100>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 343 IRQ_TYPE_LEVEL_HIGH>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			pmu@f {
+				compatible = "apple,sera-pmu";
+				reg = <0xf SPMI_USID>;
+			};
+		};
+	};
+};
diff --git a/include/dt-bindings/interrupt-controller/apple-aic.h b/include/dt-bindings/interrupt-controller/apple-aic.h
new file mode 100644
index 0000000000..9ac56a7e6d
--- /dev/null
+++ b/include/dt-bindings/interrupt-controller/apple-aic.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
+#ifndef _DT_BINDINGS_INTERRUPT_CONTROLLER_APPLE_AIC_H
+#define _DT_BINDINGS_INTERRUPT_CONTROLLER_APPLE_AIC_H
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#define AIC_IRQ	0
+#define AIC_FIQ	1
+
+#define AIC_TMR_HV_PHYS		0
+#define AIC_TMR_HV_VIRT		1
+#define AIC_TMR_GUEST_PHYS	2
+#define AIC_TMR_GUEST_VIRT	3
+
+#endif
diff --git a/include/dt-bindings/pinctrl/apple.h b/include/dt-bindings/pinctrl/apple.h
new file mode 100644
index 0000000000..ea0a6f4665
--- /dev/null
+++ b/include/dt-bindings/pinctrl/apple.h
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0+ OR MIT */
+/*
+ * This header provides constants for Apple pinctrl bindings.
+ */
+
+#ifndef _DT_BINDINGS_PINCTRL_APPLE_H
+#define _DT_BINDINGS_PINCTRL_APPLE_H
+
+#define APPLE_PINMUX(pin, func) ((pin) | ((func) << 16))
+#define APPLE_PIN(pinmux) ((pinmux) & 0xffff)
+#define APPLE_FUNC(pinmux) ((pinmux) >> 16)
+
+#endif /* _DT_BINDINGS_PINCTRL_APPLE_H */
diff --git a/include/dt-bindings/spmi/spmi.h b/include/dt-bindings/spmi/spmi.h
new file mode 100644
index 0000000000..ad4a43481d
--- /dev/null
+++ b/include/dt-bindings/spmi/spmi.h
@@ -0,0 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* Copyright (c) 2013, The Linux Foundation. All rights reserved.
+ */
+#ifndef __DT_BINDINGS_SPMI_H
+#define __DT_BINDINGS_SPMI_H
+
+#define SPMI_USID	0
+#define SPMI_GSID	1
+
+#endif
-- 
2.33.0


^ permalink raw reply related	[flat|nested] 46+ messages in thread

* [PATCH 5/5] doc: board: apple: Add Apple M1 documentation
  2021-09-18 13:54 [PATCH 0/5] Apple M1 Support Mark Kettenis
                   ` (3 preceding siblings ...)
  2021-09-18 13:54 ` [PATCH 4/5] arm: dts: apple: Add preliminary device trees Mark Kettenis
@ 2021-09-18 13:54 ` Mark Kettenis
  2021-09-19  1:22   ` Bin Meng
                     ` (2 more replies)
  2021-09-25  1:20 ` [PATCH 0/5] Apple M1 Support Simon Glass
  5 siblings, 3 replies; 46+ messages in thread
From: Mark Kettenis @ 2021-09-18 13:54 UTC (permalink / raw)
  To: u-boot
  Cc: Mark Kettenis, Oliver Graute, Leo Yu-Chi Liang, Jonathan Balkind,
	Bin Meng, Michael Walle, Stephan Gerhold, Padmarao Begari,
	Tianrui Wei, Masami Hiramatsu, Heinrich Schuchardt, Simon Glass,
	Asherah Connor, Michal Simek, Wasim Khan, Igor Opaniuk, Ye Li,
	Stefan Roese, Marek Behún, Vabhav Sharma, Weijie Gao,
	AKASHI Takahiro, Pratyush Yadav, Andy Shevchenko

Provide preliminary instructions on how to get U-Boot to run on
Apple Silicon Macs.

Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
---
 doc/board/apple/index.rst |  9 +++++++
 doc/board/apple/m1.rst    | 56 +++++++++++++++++++++++++++++++++++++++
 doc/board/index.rst       |  1 +
 3 files changed, 66 insertions(+)
 create mode 100644 doc/board/apple/index.rst
 create mode 100644 doc/board/apple/m1.rst

diff --git a/doc/board/apple/index.rst b/doc/board/apple/index.rst
new file mode 100644
index 0000000000..8446847818
--- /dev/null
+++ b/doc/board/apple/index.rst
@@ -0,0 +1,9 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+Apple
+=====
+
+.. toctree::
+   :maxdepth: 2
+
+   m1
diff --git a/doc/board/apple/m1.rst b/doc/board/apple/m1.rst
new file mode 100644
index 0000000000..2f2d940a4c
--- /dev/null
+++ b/doc/board/apple/m1.rst
@@ -0,0 +1,56 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+U-Boot for Apple Silicon Macs
+=============================
+
+Allows Apple Silicon Macs to boot U-Boot via the m1n1 bootloader
+developed by the Asahi Linux project.  At this point the machines with
+the following SoCs work:
+
+ - Apple M1 SoC
+
+On these SoCs the following hardware is supported:
+
+ - S5L serial port
+ - Framebuffer
+ - USB 3.1 Type-C ports
+
+Device trees are currently provided for the M1 Mac mini (2020, J274)
+and M1 MacBook Pro 13" (2020, J293).  The M1 MacBook Air (2020) is
+expected to work with the J293 device tree.  The M1 iMac (2021) may
+work with the J274 device tree.
+
+Building U-Boot
+---------------
+
+.. code-block:: bash
+
+    $ export CROSS_COMPILE=aarch64-none-elf-
+    $ make apple_m1_defconfig
+    $ make
+
+This will build ``u-boot-nodtb.bin`` as well as devices trees for some
+of the supported machines.  These device trees can be found in the
+``arch/arm/dts`` subdirectory of your build.
+
+Image creation
+--------------
+
+In order to run U-Boot on an Apple Silicon Mac, U-Boot has to be used
+as a payload for the m1n1 bootloader.  Instructions for building m1n1
+can be found here:
+
+    https://github.com/AsahiLinux/docs/wiki/SW%3Am1n1
+
+.. code-block:: bash
+
+    $ cat m1n1.macho t8103-j274.dtb u-boot-nodtb.bin > u-boot.macho
+
+Image installation
+------------------
+
+Instructions on how to install U-Boot on your Mac can be found at:
+
+    https://github.com/AsahiLinux/docs/wiki/Developer-Quickstart
+
+Just replace ``m1n1.macho`` with ``u-boot.macho`` in the instructions.
diff --git a/doc/board/index.rst b/doc/board/index.rst
index 33087074fa..0add55b5d3 100644
--- a/doc/board/index.rst
+++ b/doc/board/index.rst
@@ -10,6 +10,7 @@ Board-specific doc
    advantech/index
    AndesTech/index
    amlogic/index
+   apple/index
    atmel/index
    congatec/index
    coreboot/index
-- 
2.33.0


^ permalink raw reply related	[flat|nested] 46+ messages in thread

* Re: [PATCH 1/5] arm: apple: Add initial support for Apple's M1 SoC
  2021-09-18 13:54 ` [PATCH 1/5] arm: apple: Add initial support for Apple's M1 SoC Mark Kettenis
@ 2021-09-19  1:04   ` Bin Meng
  2021-09-19  1:17     ` Bin Meng
  2021-09-19 20:05     ` Mark Kettenis
  2021-09-20  3:15   ` Simon Glass
  1 sibling, 2 replies; 46+ messages in thread
From: Bin Meng @ 2021-09-19  1:04 UTC (permalink / raw)
  To: Mark Kettenis
  Cc: U-Boot Mailing List, Bharat Gooty, Rayagonda Kokatanur,
	Oliver Graute, Bin Meng, Leo Yu-Chi Liang, Tianrui Wei,
	Stephan Gerhold, Padmarao Begari, Kishon Vijay Abraham I,
	Heinrich Schuchardt, Michael Walle, Masami Hiramatsu,
	Simon Glass, Asherah Connor, Wasim Khan, Michal Simek,
	Igor Opaniuk, Heiko Schocher, Ye Li, Stefan Roese, Vabhav Sharma,
	Marek Behún, Weijie Gao, AKASHI Takahiro, Andy Shevchenko,
	Pratyush Yadav

Hi Mark,

On Sat, Sep 18, 2021 at 9:55 PM Mark Kettenis <kettenis@openbsd.org> wrote:
>
> Add support for Apple's M1 SoC that is used in "Apple Silicon"
> Macs.  This builds a basic U-Boot that can be used as a payload
> for the m1n1 boot loader being developed by the Asahi Linux
> project.
>
> Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
> ---
>  arch/arm/Kconfig                    |  22 ++++
>  arch/arm/Makefile                   |   1 +
>  arch/arm/mach-apple/Kconfig         |  18 ++++
>  arch/arm/mach-apple/Makefile        |   4 +
>  arch/arm/mach-apple/board.c         | 158 ++++++++++++++++++++++++++++
>  arch/arm/mach-apple/lowlevel_init.S |  16 +++
>  configs/apple_m1_defconfig          |  14 +++
>  include/configs/apple.h             |  38 +++++++
>  8 files changed, 271 insertions(+)
>  create mode 100644 arch/arm/mach-apple/Kconfig
>  create mode 100644 arch/arm/mach-apple/Makefile
>  create mode 100644 arch/arm/mach-apple/board.c
>  create mode 100644 arch/arm/mach-apple/lowlevel_init.S
>  create mode 100644 configs/apple_m1_defconfig
>  create mode 100644 include/configs/apple.h
>
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index b5bd3284cd..7cdea1f615 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -895,6 +895,26 @@ config ARCH_NEXELL
>         select DM
>         select GPIO_EXTRA_HEADER
>
> +config ARCH_APPLE
> +       bool "Apple SoCs"
> +       select ARM64
> +       select LINUX_KERNEL_IMAGE_HEADER
> +       select POSITION_INDEPENDENT
> +       select BLK
> +       select DM
> +       select DM_KEYBOARD
> +       select DM_SERIAL
> +       select DM_USB
> +       select DM_VIDEO
> +       select CMD_USB
> +       select MISC
> +       select OF_CONTROL
> +       select OF_BOARD
> +       select USB
> +       imply CMD_DM
> +       imply CMD_GPT
> +       imply DISTRO_DEFAULTS
> +
>  config ARCH_OWL
>         bool "Actions Semi OWL SoCs"
>         select DM
> @@ -1932,6 +1952,8 @@ config ISW_ENTRY_ADDR
>           image headers.
>  endif
>
> +source "arch/arm/mach-apple/Kconfig"
> +
>  source "arch/arm/mach-aspeed/Kconfig"
>
>  source "arch/arm/mach-at91/Kconfig"
> diff --git a/arch/arm/Makefile b/arch/arm/Makefile
> index c68e598a67..44178c204b 100644
> --- a/arch/arm/Makefile
> +++ b/arch/arm/Makefile
> @@ -51,6 +51,7 @@ PLATFORM_CPPFLAGS += $(arch-y) $(tune-y)
>
>  # Machine directory name.  This list is sorted alphanumerically
>  # by CONFIG_* macro name.
> +machine-$(CONFIG_ARCH_APPLE)           += apple
>  machine-$(CONFIG_ARCH_ASPEED)          += aspeed
>  machine-$(CONFIG_ARCH_AT91)            += at91
>  machine-$(CONFIG_ARCH_BCM283X)         += bcm283x
> diff --git a/arch/arm/mach-apple/Kconfig b/arch/arm/mach-apple/Kconfig
> new file mode 100644
> index 0000000000..66cab91b2a
> --- /dev/null
> +++ b/arch/arm/mach-apple/Kconfig
> @@ -0,0 +1,18 @@
> +if ARCH_APPLE
> +
> +config SYS_TEXT_BASE
> +       default 0x00000000
> +
> +config SYS_CONFIG_NAME
> +       default "apple"
> +
> +config SYS_SOC
> +       default "m1"
> +
> +config SYS_MALLOC_LEN
> +       default 0x4000000
> +
> +config SYS_MALLOC_F_LEN
> +       default 0x4000
> +
> +endif
> diff --git a/arch/arm/mach-apple/Makefile b/arch/arm/mach-apple/Makefile
> new file mode 100644
> index 0000000000..e74a8c9df1
> --- /dev/null
> +++ b/arch/arm/mach-apple/Makefile
> @@ -0,0 +1,4 @@
> +# SPDX-License-Identifier: GPL-2.0+
> +
> +obj-y += board.o
> +obj-y += lowlevel_init.o
> diff --git a/arch/arm/mach-apple/board.c b/arch/arm/mach-apple/board.c
> new file mode 100644
> index 0000000000..0c8b35292e
> --- /dev/null
> +++ b/arch/arm/mach-apple/board.c
> @@ -0,0 +1,158 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * (C) Copyright 2021 Mark Kettenis <kettenis@openbsd.org>
> + */
> +
> +#include <common.h>
> +#include <efi_loader.h>
> +
> +#include <asm/armv8/mmu.h>
> +#include <asm/global_data.h>
> +#include <asm/io.h>
> +#include <asm/system.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +static struct mm_region apple_mem_map[] = {
> +       {
> +               /* I/O */
> +               .virt = 0x200000000,
> +               .phys = 0x200000000,
> +               .size = 8UL * SZ_1G,
> +               .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
> +                        PTE_BLOCK_NON_SHARE |
> +                        PTE_BLOCK_PXN | PTE_BLOCK_UXN
> +       }, {
> +               /* I/O */
> +               .virt = 0x500000000,
> +               .phys = 0x500000000,
> +               .size = 2UL * SZ_1G,
> +               .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
> +                        PTE_BLOCK_NON_SHARE |
> +                        PTE_BLOCK_PXN | PTE_BLOCK_UXN
> +       }, {
> +               /* I/O */
> +               .virt = 0x680000000,
> +               .phys = 0x680000000,
> +               .size = SZ_512M,
> +               .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
> +                        PTE_BLOCK_NON_SHARE |
> +                        PTE_BLOCK_PXN | PTE_BLOCK_UXN
> +       }, {
> +               /* PCIE */
> +               .virt = 0x6a0000000,
> +               .phys = 0x6a0000000,
> +               .size = SZ_512M,
> +               .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRE) |
> +                        PTE_BLOCK_INNER_SHARE |
> +                        PTE_BLOCK_PXN | PTE_BLOCK_UXN
> +       }, {
> +               /* PCIE */
> +               .virt = 0x6c0000000,
> +               .phys = 0x6c0000000,
> +               .size = SZ_1G,
> +               .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRE) |
> +                        PTE_BLOCK_INNER_SHARE |
> +                        PTE_BLOCK_PXN | PTE_BLOCK_UXN
> +       }, {
> +               /* RAM */
> +               .virt = 0x800000000,
> +               .phys = 0x800000000,
> +               .size = 8UL * SZ_1G,
> +               .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
> +                        PTE_BLOCK_INNER_SHARE
> +       }, {
> +               /* Empty entry for framebuffer */
> +               0,
> +       }, {
> +               /* List terminator */
> +               0,
> +       }
> +};
> +
> +struct mm_region *mem_map = apple_mem_map;
> +
> +int board_init(void)
> +{
> +       return 0;
> +}
> +
> +int dram_init(void)
> +{
> +       int index, node, ret;
> +       fdt_addr_t base;
> +       fdt_size_t size;
> +
> +       ret = fdtdec_setup_mem_size_base();
> +       if (ret)
> +               return ret;
> +
> +       /* Update RAM mapping. */

nits: please remove the ending .

> +       index = ARRAY_SIZE(apple_mem_map) - 3;
> +       apple_mem_map[index].virt = gd->ram_base;
> +       apple_mem_map[index].phys = gd->ram_base;
> +       apple_mem_map[index].size = gd->ram_size;
> +
> +       node = fdt_path_offset(gd->fdt_blob, "/chosen/framebuffer");
> +       if (node < 0)
> +               return 0;
> +
> +       base = fdtdec_get_addr_size(gd->fdt_blob, node, "reg", &size);
> +       if (base == FDT_ADDR_T_NONE)
> +               return 0;
> +
> +       /* Add framebuffer mapping. */

ditto

> +       index = ARRAY_SIZE(apple_mem_map) - 2;
> +       apple_mem_map[index].virt = base;
> +       apple_mem_map[index].phys = base;
> +       apple_mem_map[index].size = size;
> +       apple_mem_map[index].attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL_NC) |
> +               PTE_BLOCK_INNER_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN;
> +
> +       return 0;
> +}
> +
> +int dram_init_banksize(void)
> +{
> +       return fdtdec_setup_memory_banksize();
> +}
> +
> +#define APPLE_WDT_BASE         0x23d2b0000ULL
> +
> +#define APPLE_WDT_SYS_CTL_ENABLE       BIT(2)
> +
> +typedef struct apple_wdt {
> +       u32     reserved0[3];
> +       u32     chip_ctl;
> +       u32     sys_tmr;
> +       u32     sys_cmp;
> +       u32     reserved1;
> +       u32     sys_ctl;
> +} apple_wdt_t;
> +
> +void reset_cpu(void)

This looks like we should add a new sysreset driver for Apple Arm SoC.

> +{
> +       apple_wdt_t *wdt = (apple_wdt_t *)APPLE_WDT_BASE;
> +
> +       writel(0, &wdt->sys_cmp);
> +       writel(APPLE_WDT_SYS_CTL_ENABLE, &wdt->sys_ctl);
> +
> +       while(1)
> +               wfi();
> +}
> +
> +extern long fw_dtb_pointer;
> +
> +void *board_fdt_blob_setup(void)
> +{
> +       return (void *)fw_dtb_pointer;
> +}
> +
> +ulong board_get_usable_ram_top(ulong total_size)
> +{
> +       /*
> +        * Top part of RAM is used by firmware for things like the
> +        * framebuffer.  This gives us plenty of room to play with.
> +        */
> +       return 0x980000000;
> +}
> diff --git a/arch/arm/mach-apple/lowlevel_init.S b/arch/arm/mach-apple/lowlevel_init.S
> new file mode 100644
> index 0000000000..0f5313163e
> --- /dev/null
> +++ b/arch/arm/mach-apple/lowlevel_init.S
> @@ -0,0 +1,16 @@
> +/* SPDX-License-Identifier: GPL-2.0+ */
> +/*
> + * (C) Copyright 2021 Mark Kettenis <kettenis@openbsd.org>
> + */
> +
> +.align 8
> +.global fw_dtb_pointer
> +fw_dtb_pointer:
> +       .quad   0

Is this filled in by m1n1?

> +
> +.global save_boot_params
> +save_boot_params:
> +       adr     x1, fw_dtb_pointer
> +       str     x0, [x1]
> +
> +       b       save_boot_params_ret
> diff --git a/configs/apple_m1_defconfig b/configs/apple_m1_defconfig
> new file mode 100644
> index 0000000000..a7ae15576b
> --- /dev/null
> +++ b/configs/apple_m1_defconfig
> @@ -0,0 +1,14 @@
> +CONFIG_ARM=y
> +CONFIG_ARCH_APPLE=y
> +# CONFIG_DISPLAY_CPUINFO is not set
> +# CONFIG_MMC is not set
> +# CONFIG_NET is not set
> +CONFIG_VIDEO_SIMPLE=y
> +CONFIG_DISPLAY_BOARDINFO_LATE=y
> +CONFIG_USB_XHCI_HCD=y
> +CONFIG_USB_XHCI_DWC3=y
> +CONFIG_USB_KEYBOARD=y
> +CONFIG_USB_STORAGE=y
> +CONFIG_USE_PREBOOT=y
> +CONFIG_PREBOOT="usb start"
> +# CONFIG_GENERATE_SMBIOS_TABLE is not set
> diff --git a/include/configs/apple.h b/include/configs/apple.h
> new file mode 100644
> index 0000000000..1c246af002
> --- /dev/null
> +++ b/include/configs/apple.h
> @@ -0,0 +1,38 @@
> +#ifndef __CONFIG_H
> +#define __CONFIG_H
> +
> +#include <linux/sizes.h>
> +
> +#define CONFIG_SYS_LOAD_ADDR   0x880000000
> +
> +#define CONFIG_SYS_SDRAM_BASE  0x880000000
> +
> +#define CONFIG_LNX_KRNL_IMG_TEXT_OFFSET_BASE   CONFIG_SYS_TEXT_BASE
> +
> +/* Environment */
> +#define ENV_DEVICE_SETTINGS \
> +       "stdin=serial,usbkbd\0" \
> +       "stdout=serial,vidconsole\0" \
> +       "stderr=serial,vidconsole\0"
> +
> +#define ENV_MEM_LAYOUT_SETTINGS \
> +       "fdt_addr_r=0x960100000\0" \
> +       "kernel_addr_r=0x960200000\0"
> +
> +#if CONFIG_IS_ENABLED(CMD_USB)
> +       #define BOOT_TARGET_USB(func) func(USB, usb, 0)
> +#else
> +       #define BOOT_TARGET_USB(func)
> +#endif
> +
> +#define BOOT_TARGET_DEVICES(func) \
> +       BOOT_TARGET_USB(func)
> +
> +#include <config_distro_bootcmd.h>
> +
> +#define CONFIG_EXTRA_ENV_SETTINGS \
> +       ENV_DEVICE_SETTINGS \
> +       ENV_MEM_LAYOUT_SETTINGS \
> +       BOOTENV
> +
> +#endif

Regards,
Bin

^ permalink raw reply	[flat|nested] 46+ messages in thread

* Re: [PATCH 2/5] serial: s5p: Add Apple M1 support
  2021-09-18 13:54 ` [PATCH 2/5] serial: s5p: Add Apple M1 support Mark Kettenis
@ 2021-09-19  1:11   ` Bin Meng
  2021-09-19 20:30     ` Mark Kettenis
  2021-09-20  3:15   ` Simon Glass
  1 sibling, 1 reply; 46+ messages in thread
From: Bin Meng @ 2021-09-19  1:11 UTC (permalink / raw)
  To: Mark Kettenis
  Cc: U-Boot Mailing List, Oliver Graute, Leo Yu-Chi Liang,
	Kishon Vijay Abraham I, Priyanka Jain, Stephan Gerhold,
	Padmarao Begari, Tianrui Wei, Michael Walle, Heinrich Schuchardt,
	Simon Glass, Asherah Connor, Bin Meng, Michal Simek, Wasim Khan,
	Ye Li, Igor Opaniuk, Stefan Roese, AKASHI Takahiro,
	Vabhav Sharma, Weijie Gao, Pratyush Yadav, Andy Shevchenko

Hi Mark,

On Sat, Sep 18, 2021 at 9:55 PM Mark Kettenis <kettenis@openbsd.org> wrote:
>
> Apple M1 SoCs include an S5L UART which is a variant of the S5P
> UART.  Add support for this variant and enable it by default
> on Apple SoCs.
>
> Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
> ---
>  arch/arm/include/asm/arch-m1/clk.h  | 11 ++++++++
>  arch/arm/include/asm/arch-m1/uart.h | 41 +++++++++++++++++++++++++++++
>  arch/arm/mach-apple/board.c         |  5 ++++
>  drivers/serial/Kconfig              |  2 +-
>  drivers/serial/serial_s5p.c         | 22 ++++++++++++++++
>  5 files changed, 80 insertions(+), 1 deletion(-)
>  create mode 100644 arch/arm/include/asm/arch-m1/clk.h
>  create mode 100644 arch/arm/include/asm/arch-m1/uart.h
>
> diff --git a/arch/arm/include/asm/arch-m1/clk.h b/arch/arm/include/asm/arch-m1/clk.h
> new file mode 100644
> index 0000000000..f4326d0c0f
> --- /dev/null
> +++ b/arch/arm/include/asm/arch-m1/clk.h
> @@ -0,0 +1,11 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (C) 2021 Mark Kettenis <kettenis@openbsd.org>
> + */
> +
> +#ifndef __ASM_ARM_ARCH_CLK_H_
> +#define __ASM_ARM_ARCH_CLK_H_
> +
> +unsigned long get_uart_clk(int dev_index);
> +
> +#endif
> diff --git a/arch/arm/include/asm/arch-m1/uart.h b/arch/arm/include/asm/arch-m1/uart.h
> new file mode 100644
> index 0000000000..d2a17a221e
> --- /dev/null
> +++ b/arch/arm/include/asm/arch-m1/uart.h
> @@ -0,0 +1,41 @@
> +/* SPDX-License-Identifier: GPL-2.0+ */
> +/*
> + * (C) Copyright 2009 Samsung Electronics
> + * Minkyu Kang <mk7.kang@samsung.com>
> + * Heungjun Kim <riverful.kim@samsung.com>
> + */
> +
> +#ifndef __ASM_ARCH_UART_H_
> +#define __ASM_ARCH_UART_H_
> +
> +#ifndef __ASSEMBLY__
> +/* baudrate rest value */
> +union br_rest {
> +       unsigned short  slot;           /* udivslot */
> +       unsigned char   value;          /* ufracval */
> +};
> +
> +struct s5p_uart {
> +       unsigned int    ulcon;
> +       unsigned int    ucon;
> +       unsigned int    ufcon;
> +       unsigned int    umcon;
> +       unsigned int    utrstat;
> +       unsigned int    uerstat;
> +       unsigned int    ufstat;
> +       unsigned int    umstat;
> +       unsigned int    utxh;
> +       unsigned int    urxh;
> +       unsigned int    ubrdiv;
> +       union br_rest   rest;
> +       unsigned char   res3[0x3fd0];
> +};

This does not look correct. This should be declared in the s5p UART
driver header instead of SoC's

> +
> +static inline int s5p_uart_divslot(void)
> +{
> +       return 0;
> +}
> +
> +#endif /* __ASSEMBLY__ */
> +
> +#endif
> diff --git a/arch/arm/mach-apple/board.c b/arch/arm/mach-apple/board.c
> index 0c8b35292e..8bc5c2f69e 100644
> --- a/arch/arm/mach-apple/board.c
> +++ b/arch/arm/mach-apple/board.c
> @@ -156,3 +156,8 @@ ulong board_get_usable_ram_top(ulong total_size)
>          */
>         return 0x980000000;
>  }
> +
> +unsigned long get_uart_clk(int dev_index)
> +{
> +       return 24000000;
> +}
> diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
> index 93348c0929..c3ac773929 100644
> --- a/drivers/serial/Kconfig
> +++ b/drivers/serial/Kconfig
> @@ -719,7 +719,7 @@ config ROCKCHIP_SERIAL
>
>  config S5P_SERIAL
>         bool "Support for Samsung S5P UART"
> -       depends on ARCH_EXYNOS || ARCH_S5PC1XX
> +       depends on ARCH_APPLE || ARCH_EXYNOS || ARCH_S5PC1XX
>         default y
>         help
>           Select this to enable Samsung S5P UART support.
> diff --git a/drivers/serial/serial_s5p.c b/drivers/serial/serial_s5p.c
> index 6d09952a5d..eb770d9b62 100644
> --- a/drivers/serial/serial_s5p.c
> +++ b/drivers/serial/serial_s5p.c
> @@ -21,12 +21,21 @@
>
>  DECLARE_GLOBAL_DATA_PTR;
>
> +#ifdef CONFIG_ARCH_APPLE
> +#define RX_FIFO_COUNT_SHIFT    0
> +#define RX_FIFO_COUNT_MASK     (0xf << RX_FIFO_COUNT_SHIFT)
> +#define RX_FIFO_FULL           (1 << 8)
> +#define TX_FIFO_COUNT_SHIFT    4
> +#define TX_FIFO_COUNT_MASK     (0xf << TX_FIFO_COUNT_SHIFT)
> +#define TX_FIFO_FULL           (1 << 9)

So different bit positions for RX/TX FIFIO register but still it is
s5p compatible, strange ...

> +#else
>  #define RX_FIFO_COUNT_SHIFT    0
>  #define RX_FIFO_COUNT_MASK     (0xff << RX_FIFO_COUNT_SHIFT)
>  #define RX_FIFO_FULL           (1 << 8)
>  #define TX_FIFO_COUNT_SHIFT    16
>  #define TX_FIFO_COUNT_MASK     (0xff << TX_FIFO_COUNT_SHIFT)
>  #define TX_FIFO_FULL           (1 << 24)
> +#endif
>
>  /* Information about a serial port */
>  struct s5p_serial_plat {
> @@ -83,7 +92,11 @@ static void __maybe_unused s5p_serial_baud(struct s5p_uart *uart, uint uclk,
>         if (s5p_uart_divslot())
>                 writew(udivslot[val % 16], &uart->rest.slot);
>         else
> +#ifdef CONFIG_ARCH_APPLE
> +               writel(val % 16, &uart->rest.value);

This looks like we should add a property in DT like "reg-width" to
control such behavior?

> +#else
>                 writeb(val % 16, &uart->rest.value);
> +#endif
>  }
>
>  #ifndef CONFIG_SPL_BUILD
> @@ -148,7 +161,11 @@ static int s5p_serial_getc(struct udevice *dev)
>                 return -EAGAIN;
>
>         serial_err_check(uart, 0);
> +#ifdef CONFIG_ARCH_APPLE
> +       return (int)(readl(&uart->urxh) & 0xff);
> +#else
>         return (int)(readb(&uart->urxh) & 0xff);
> +#endif
>  }
>
>  static int s5p_serial_putc(struct udevice *dev, const char ch)
> @@ -159,7 +176,11 @@ static int s5p_serial_putc(struct udevice *dev, const char ch)
>         if (readl(&uart->ufstat) & TX_FIFO_FULL)
>                 return -EAGAIN;
>
> +#ifdef CONFIG_ARCH_APPLE
> +       writel(ch, &uart->utxh);
> +#else
>         writeb(ch, &uart->utxh);
> +#endif
>         serial_err_check(uart, 1);
>
>         return 0;
> @@ -201,6 +222,7 @@ static const struct dm_serial_ops s5p_serial_ops = {
>
>  static const struct udevice_id s5p_serial_ids[] = {
>         { .compatible = "samsung,exynos4210-uart" },
> +       { .compatible = "apple,s5l-uart" },
>         { }
>  };

Regards,
Bin

^ permalink raw reply	[flat|nested] 46+ messages in thread

* Re: [PATCH 1/5] arm: apple: Add initial support for Apple's M1 SoC
  2021-09-19  1:04   ` Bin Meng
@ 2021-09-19  1:17     ` Bin Meng
  2021-09-19 20:33       ` Mark Kettenis
  2021-09-19 20:05     ` Mark Kettenis
  1 sibling, 1 reply; 46+ messages in thread
From: Bin Meng @ 2021-09-19  1:17 UTC (permalink / raw)
  To: Mark Kettenis
  Cc: U-Boot Mailing List, Bharat Gooty, Rayagonda Kokatanur,
	Oliver Graute, Bin Meng, Leo Yu-Chi Liang, Tianrui Wei,
	Stephan Gerhold, Padmarao Begari, Kishon Vijay Abraham I,
	Heinrich Schuchardt, Michael Walle, Masami Hiramatsu,
	Simon Glass, Asherah Connor, Wasim Khan, Michal Simek,
	Igor Opaniuk, Heiko Schocher, Ye Li, Stefan Roese, Vabhav Sharma,
	Marek Behún, Weijie Gao, AKASHI Takahiro, Andy Shevchenko,
	Pratyush Yadav

Hi Mark,

On Sun, Sep 19, 2021 at 9:04 AM Bin Meng <bmeng.cn@gmail.com> wrote:
>
> Hi Mark,
>
> On Sat, Sep 18, 2021 at 9:55 PM Mark Kettenis <kettenis@openbsd.org> wrote:
> >
> > Add support for Apple's M1 SoC that is used in "Apple Silicon"
> > Macs.  This builds a basic U-Boot that can be used as a payload
> > for the m1n1 boot loader being developed by the Asahi Linux
> > project.
> >
> > Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
> > ---
> >  arch/arm/Kconfig                    |  22 ++++
> >  arch/arm/Makefile                   |   1 +
> >  arch/arm/mach-apple/Kconfig         |  18 ++++
> >  arch/arm/mach-apple/Makefile        |   4 +
> >  arch/arm/mach-apple/board.c         | 158 ++++++++++++++++++++++++++++
> >  arch/arm/mach-apple/lowlevel_init.S |  16 +++
> >  configs/apple_m1_defconfig          |  14 +++
> >  include/configs/apple.h             |  38 +++++++
> >  8 files changed, 271 insertions(+)
> >  create mode 100644 arch/arm/mach-apple/Kconfig
> >  create mode 100644 arch/arm/mach-apple/Makefile
> >  create mode 100644 arch/arm/mach-apple/board.c
> >  create mode 100644 arch/arm/mach-apple/lowlevel_init.S
> >  create mode 100644 configs/apple_m1_defconfig
> >  create mode 100644 include/configs/apple.h
> >
> > diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> > index b5bd3284cd..7cdea1f615 100644
> > --- a/arch/arm/Kconfig
> > +++ b/arch/arm/Kconfig
> > @@ -895,6 +895,26 @@ config ARCH_NEXELL
> >         select DM
> >         select GPIO_EXTRA_HEADER
> >
> > +config ARCH_APPLE
> > +       bool "Apple SoCs"
> > +       select ARM64
> > +       select LINUX_KERNEL_IMAGE_HEADER
> > +       select POSITION_INDEPENDENT
> > +       select BLK
> > +       select DM
> > +       select DM_KEYBOARD
> > +       select DM_SERIAL
> > +       select DM_USB
> > +       select DM_VIDEO
> > +       select CMD_USB
> > +       select MISC
> > +       select OF_CONTROL
> > +       select OF_BOARD
> > +       select USB
> > +       imply CMD_DM
> > +       imply CMD_GPT
> > +       imply DISTRO_DEFAULTS
> > +
> >  config ARCH_OWL
> >         bool "Actions Semi OWL SoCs"
> >         select DM
> > @@ -1932,6 +1952,8 @@ config ISW_ENTRY_ADDR
> >           image headers.
> >  endif
> >
> > +source "arch/arm/mach-apple/Kconfig"
> > +
> >  source "arch/arm/mach-aspeed/Kconfig"
> >
> >  source "arch/arm/mach-at91/Kconfig"
> > diff --git a/arch/arm/Makefile b/arch/arm/Makefile
> > index c68e598a67..44178c204b 100644
> > --- a/arch/arm/Makefile
> > +++ b/arch/arm/Makefile
> > @@ -51,6 +51,7 @@ PLATFORM_CPPFLAGS += $(arch-y) $(tune-y)
> >
> >  # Machine directory name.  This list is sorted alphanumerically
> >  # by CONFIG_* macro name.
> > +machine-$(CONFIG_ARCH_APPLE)           += apple
> >  machine-$(CONFIG_ARCH_ASPEED)          += aspeed
> >  machine-$(CONFIG_ARCH_AT91)            += at91
> >  machine-$(CONFIG_ARCH_BCM283X)         += bcm283x
> > diff --git a/arch/arm/mach-apple/Kconfig b/arch/arm/mach-apple/Kconfig
> > new file mode 100644
> > index 0000000000..66cab91b2a
> > --- /dev/null
> > +++ b/arch/arm/mach-apple/Kconfig
> > @@ -0,0 +1,18 @@
> > +if ARCH_APPLE
> > +
> > +config SYS_TEXT_BASE
> > +       default 0x00000000
> > +
> > +config SYS_CONFIG_NAME
> > +       default "apple"
> > +
> > +config SYS_SOC
> > +       default "m1"
> > +
> > +config SYS_MALLOC_LEN
> > +       default 0x4000000
> > +
> > +config SYS_MALLOC_F_LEN
> > +       default 0x4000
> > +
> > +endif
> > diff --git a/arch/arm/mach-apple/Makefile b/arch/arm/mach-apple/Makefile
> > new file mode 100644
> > index 0000000000..e74a8c9df1
> > --- /dev/null
> > +++ b/arch/arm/mach-apple/Makefile
> > @@ -0,0 +1,4 @@
> > +# SPDX-License-Identifier: GPL-2.0+
> > +
> > +obj-y += board.o
> > +obj-y += lowlevel_init.o
> > diff --git a/arch/arm/mach-apple/board.c b/arch/arm/mach-apple/board.c
> > new file mode 100644
> > index 0000000000..0c8b35292e
> > --- /dev/null
> > +++ b/arch/arm/mach-apple/board.c
> > @@ -0,0 +1,158 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/*
> > + * (C) Copyright 2021 Mark Kettenis <kettenis@openbsd.org>
> > + */
> > +
> > +#include <common.h>
> > +#include <efi_loader.h>
> > +
> > +#include <asm/armv8/mmu.h>
> > +#include <asm/global_data.h>
> > +#include <asm/io.h>
> > +#include <asm/system.h>
> > +
> > +DECLARE_GLOBAL_DATA_PTR;
> > +
> > +static struct mm_region apple_mem_map[] = {
> > +       {
> > +               /* I/O */
> > +               .virt = 0x200000000,
> > +               .phys = 0x200000000,
> > +               .size = 8UL * SZ_1G,
> > +               .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
> > +                        PTE_BLOCK_NON_SHARE |
> > +                        PTE_BLOCK_PXN | PTE_BLOCK_UXN
> > +       }, {
> > +               /* I/O */
> > +               .virt = 0x500000000,
> > +               .phys = 0x500000000,
> > +               .size = 2UL * SZ_1G,
> > +               .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
> > +                        PTE_BLOCK_NON_SHARE |
> > +                        PTE_BLOCK_PXN | PTE_BLOCK_UXN
> > +       }, {
> > +               /* I/O */
> > +               .virt = 0x680000000,
> > +               .phys = 0x680000000,
> > +               .size = SZ_512M,
> > +               .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
> > +                        PTE_BLOCK_NON_SHARE |
> > +                        PTE_BLOCK_PXN | PTE_BLOCK_UXN
> > +       }, {
> > +               /* PCIE */
> > +               .virt = 0x6a0000000,
> > +               .phys = 0x6a0000000,
> > +               .size = SZ_512M,
> > +               .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRE) |
> > +                        PTE_BLOCK_INNER_SHARE |
> > +                        PTE_BLOCK_PXN | PTE_BLOCK_UXN
> > +       }, {
> > +               /* PCIE */
> > +               .virt = 0x6c0000000,
> > +               .phys = 0x6c0000000,
> > +               .size = SZ_1G,
> > +               .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRE) |
> > +                        PTE_BLOCK_INNER_SHARE |
> > +                        PTE_BLOCK_PXN | PTE_BLOCK_UXN
> > +       }, {
> > +               /* RAM */
> > +               .virt = 0x800000000,
> > +               .phys = 0x800000000,
> > +               .size = 8UL * SZ_1G,
> > +               .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
> > +                        PTE_BLOCK_INNER_SHARE
> > +       }, {
> > +               /* Empty entry for framebuffer */
> > +               0,
> > +       }, {
> > +               /* List terminator */
> > +               0,
> > +       }
> > +};
> > +
> > +struct mm_region *mem_map = apple_mem_map;
> > +
> > +int board_init(void)
> > +{
> > +       return 0;
> > +}
> > +
> > +int dram_init(void)
> > +{
> > +       int index, node, ret;
> > +       fdt_addr_t base;
> > +       fdt_size_t size;
> > +
> > +       ret = fdtdec_setup_mem_size_base();
> > +       if (ret)
> > +               return ret;
> > +
> > +       /* Update RAM mapping. */
>
> nits: please remove the ending .
>
> > +       index = ARRAY_SIZE(apple_mem_map) - 3;

This is error prone. Someone else updating apple_mem_map may create an
incorrect index for us.

> > +       apple_mem_map[index].virt = gd->ram_base;
> > +       apple_mem_map[index].phys = gd->ram_base;
> > +       apple_mem_map[index].size = gd->ram_size;
> > +
> > +       node = fdt_path_offset(gd->fdt_blob, "/chosen/framebuffer");
> > +       if (node < 0)
> > +               return 0;
> > +
> > +       base = fdtdec_get_addr_size(gd->fdt_blob, node, "reg", &size);
> > +       if (base == FDT_ADDR_T_NONE)
> > +               return 0;
> > +
> > +       /* Add framebuffer mapping. */
>
> ditto
>
> > +       index = ARRAY_SIZE(apple_mem_map) - 2;
> > +       apple_mem_map[index].virt = base;
> > +       apple_mem_map[index].phys = base;
> > +       apple_mem_map[index].size = size;
> > +       apple_mem_map[index].attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL_NC) |
> > +               PTE_BLOCK_INNER_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN;
> > +
> > +       return 0;
> > +}
> > +
> > +int dram_init_banksize(void)
> > +{
> > +       return fdtdec_setup_memory_banksize();
> > +}
> > +
> > +#define APPLE_WDT_BASE         0x23d2b0000ULL
> > +
> > +#define APPLE_WDT_SYS_CTL_ENABLE       BIT(2)
> > +
> > +typedef struct apple_wdt {
> > +       u32     reserved0[3];
> > +       u32     chip_ctl;
> > +       u32     sys_tmr;
> > +       u32     sys_cmp;
> > +       u32     reserved1;
> > +       u32     sys_ctl;
> > +} apple_wdt_t;
> > +
> > +void reset_cpu(void)
>
> This looks like we should add a new sysreset driver for Apple Arm SoC.
>
> > +{
> > +       apple_wdt_t *wdt = (apple_wdt_t *)APPLE_WDT_BASE;
> > +
> > +       writel(0, &wdt->sys_cmp);
> > +       writel(APPLE_WDT_SYS_CTL_ENABLE, &wdt->sys_ctl);
> > +
> > +       while(1)
> > +               wfi();
> > +}
> > +
> > +extern long fw_dtb_pointer;
> > +
> > +void *board_fdt_blob_setup(void)
> > +{
> > +       return (void *)fw_dtb_pointer;
> > +}
> > +
> > +ulong board_get_usable_ram_top(ulong total_size)
> > +{
> > +       /*
> > +        * Top part of RAM is used by firmware for things like the
> > +        * framebuffer.  This gives us plenty of room to play with.
> > +        */
> > +       return 0x980000000;
> > +}
> > diff --git a/arch/arm/mach-apple/lowlevel_init.S b/arch/arm/mach-apple/lowlevel_init.S
> > new file mode 100644
> > index 0000000000..0f5313163e
> > --- /dev/null
> > +++ b/arch/arm/mach-apple/lowlevel_init.S
> > @@ -0,0 +1,16 @@
> > +/* SPDX-License-Identifier: GPL-2.0+ */
> > +/*
> > + * (C) Copyright 2021 Mark Kettenis <kettenis@openbsd.org>
> > + */
> > +
> > +.align 8
> > +.global fw_dtb_pointer
> > +fw_dtb_pointer:
> > +       .quad   0
>
> Is this filled in by m1n1?

Sorry I misread, so this is passed by m1n1 and filled in by U-Boot. I
think we should stop using CONFIG_OF_BOARD, and for such case we
should use CONFIG_OF_PRIOR_STAGE.

>
> > +
> > +.global save_boot_params
> > +save_boot_params:
> > +       adr     x1, fw_dtb_pointer
> > +       str     x0, [x1]
> > +
> > +       b       save_boot_params_ret

Regards,
Bin

^ permalink raw reply	[flat|nested] 46+ messages in thread

* Re: [PATCH 5/5] doc: board: apple: Add Apple M1 documentation
  2021-09-18 13:54 ` [PATCH 5/5] doc: board: apple: Add Apple M1 documentation Mark Kettenis
@ 2021-09-19  1:22   ` Bin Meng
  2021-09-20  3:16   ` Simon Glass
  2021-09-20  8:45   ` Igor Opaniuk
  2 siblings, 0 replies; 46+ messages in thread
From: Bin Meng @ 2021-09-19  1:22 UTC (permalink / raw)
  To: Mark Kettenis
  Cc: U-Boot Mailing List, Oliver Graute, Leo Yu-Chi Liang,
	Jonathan Balkind, Bin Meng, Michael Walle, Stephan Gerhold,
	Padmarao Begari, Tianrui Wei, Masami Hiramatsu,
	Heinrich Schuchardt, Simon Glass, Asherah Connor, Michal Simek,
	Wasim Khan, Igor Opaniuk, Ye Li, Stefan Roese, Marek Behún,
	Vabhav Sharma, Weijie Gao, AKASHI Takahiro, Pratyush Yadav,
	Andy Shevchenko

On Sat, Sep 18, 2021 at 9:56 PM Mark Kettenis <kettenis@openbsd.org> wrote:
>
> Provide preliminary instructions on how to get U-Boot to run on
> Apple Silicon Macs.
>
> Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
> ---
>  doc/board/apple/index.rst |  9 +++++++
>  doc/board/apple/m1.rst    | 56 +++++++++++++++++++++++++++++++++++++++
>  doc/board/index.rst       |  1 +
>  3 files changed, 66 insertions(+)
>  create mode 100644 doc/board/apple/index.rst
>  create mode 100644 doc/board/apple/m1.rst
>

Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

^ permalink raw reply	[flat|nested] 46+ messages in thread

* Re: [PATCH 1/5] arm: apple: Add initial support for Apple's M1 SoC
  2021-09-19  1:04   ` Bin Meng
  2021-09-19  1:17     ` Bin Meng
@ 2021-09-19 20:05     ` Mark Kettenis
  1 sibling, 0 replies; 46+ messages in thread
From: Mark Kettenis @ 2021-09-19 20:05 UTC (permalink / raw)
  To: Bin Meng
  Cc: kettenis, u-boot, bharat.gooty, rayagonda.kokatanur,
	oliver.graute, bin.meng, ycliang, tianrui-wei, stephan,
	padmarao.begari, kishon, xypron.glpk, michael, masami.hiramatsu,
	sjg, ashe, wasim.khan, michal.simek, igor.opaniuk, hs, ye.li, sr,
	vabhav.sharma, marek.behun, weijie.gao, takahiro.akashi,
	andriy.shevchenko, p.yadav

> From: Bin Meng <bmeng.cn@gmail.com>
> Date: Sun, 19 Sep 2021 09:04:56 +0800

Hi Bin,

Thanks for taking a look.

> Hi Mark,
> 
> On Sat, Sep 18, 2021 at 9:55 PM Mark Kettenis <kettenis@openbsd.org> wrote:
> >
> > Add support for Apple's M1 SoC that is used in "Apple Silicon"
> > Macs.  This builds a basic U-Boot that can be used as a payload
> > for the m1n1 boot loader being developed by the Asahi Linux
> > project.
> >
> > Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
> > ---
> >  arch/arm/Kconfig                    |  22 ++++
> >  arch/arm/Makefile                   |   1 +
> >  arch/arm/mach-apple/Kconfig         |  18 ++++
> >  arch/arm/mach-apple/Makefile        |   4 +
> >  arch/arm/mach-apple/board.c         | 158 ++++++++++++++++++++++++++++
> >  arch/arm/mach-apple/lowlevel_init.S |  16 +++
> >  configs/apple_m1_defconfig          |  14 +++
> >  include/configs/apple.h             |  38 +++++++
> >  8 files changed, 271 insertions(+)
> >  create mode 100644 arch/arm/mach-apple/Kconfig
> >  create mode 100644 arch/arm/mach-apple/Makefile
> >  create mode 100644 arch/arm/mach-apple/board.c
> >  create mode 100644 arch/arm/mach-apple/lowlevel_init.S
> >  create mode 100644 configs/apple_m1_defconfig
> >  create mode 100644 include/configs/apple.h
> >
> > diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> > index b5bd3284cd..7cdea1f615 100644
> > --- a/arch/arm/Kconfig
> > +++ b/arch/arm/Kconfig
> > @@ -895,6 +895,26 @@ config ARCH_NEXELL
> >         select DM
> >         select GPIO_EXTRA_HEADER
> >
> > +config ARCH_APPLE
> > +       bool "Apple SoCs"
> > +       select ARM64
> > +       select LINUX_KERNEL_IMAGE_HEADER
> > +       select POSITION_INDEPENDENT
> > +       select BLK
> > +       select DM
> > +       select DM_KEYBOARD
> > +       select DM_SERIAL
> > +       select DM_USB
> > +       select DM_VIDEO
> > +       select CMD_USB
> > +       select MISC
> > +       select OF_CONTROL
> > +       select OF_BOARD
> > +       select USB
> > +       imply CMD_DM
> > +       imply CMD_GPT
> > +       imply DISTRO_DEFAULTS
> > +
> >  config ARCH_OWL
> >         bool "Actions Semi OWL SoCs"
> >         select DM
> > @@ -1932,6 +1952,8 @@ config ISW_ENTRY_ADDR
> >           image headers.
> >  endif
> >
> > +source "arch/arm/mach-apple/Kconfig"
> > +
> >  source "arch/arm/mach-aspeed/Kconfig"
> >
> >  source "arch/arm/mach-at91/Kconfig"
> > diff --git a/arch/arm/Makefile b/arch/arm/Makefile
> > index c68e598a67..44178c204b 100644
> > --- a/arch/arm/Makefile
> > +++ b/arch/arm/Makefile
> > @@ -51,6 +51,7 @@ PLATFORM_CPPFLAGS += $(arch-y) $(tune-y)
> >
> >  # Machine directory name.  This list is sorted alphanumerically
> >  # by CONFIG_* macro name.
> > +machine-$(CONFIG_ARCH_APPLE)           += apple
> >  machine-$(CONFIG_ARCH_ASPEED)          += aspeed
> >  machine-$(CONFIG_ARCH_AT91)            += at91
> >  machine-$(CONFIG_ARCH_BCM283X)         += bcm283x
> > diff --git a/arch/arm/mach-apple/Kconfig b/arch/arm/mach-apple/Kconfig
> > new file mode 100644
> > index 0000000000..66cab91b2a
> > --- /dev/null
> > +++ b/arch/arm/mach-apple/Kconfig
> > @@ -0,0 +1,18 @@
> > +if ARCH_APPLE
> > +
> > +config SYS_TEXT_BASE
> > +       default 0x00000000
> > +
> > +config SYS_CONFIG_NAME
> > +       default "apple"
> > +
> > +config SYS_SOC
> > +       default "m1"
> > +
> > +config SYS_MALLOC_LEN
> > +       default 0x4000000
> > +
> > +config SYS_MALLOC_F_LEN
> > +       default 0x4000
> > +
> > +endif
> > diff --git a/arch/arm/mach-apple/Makefile b/arch/arm/mach-apple/Makefile
> > new file mode 100644
> > index 0000000000..e74a8c9df1
> > --- /dev/null
> > +++ b/arch/arm/mach-apple/Makefile
> > @@ -0,0 +1,4 @@
> > +# SPDX-License-Identifier: GPL-2.0+
> > +
> > +obj-y += board.o
> > +obj-y += lowlevel_init.o
> > diff --git a/arch/arm/mach-apple/board.c b/arch/arm/mach-apple/board.c
> > new file mode 100644
> > index 0000000000..0c8b35292e
> > --- /dev/null
> > +++ b/arch/arm/mach-apple/board.c
> > @@ -0,0 +1,158 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/*
> > + * (C) Copyright 2021 Mark Kettenis <kettenis@openbsd.org>
> > + */
> > +
> > +#include <common.h>
> > +#include <efi_loader.h>
> > +
> > +#include <asm/armv8/mmu.h>
> > +#include <asm/global_data.h>
> > +#include <asm/io.h>
> > +#include <asm/system.h>
> > +
> > +DECLARE_GLOBAL_DATA_PTR;
> > +
> > +static struct mm_region apple_mem_map[] = {
> > +       {
> > +               /* I/O */
> > +               .virt = 0x200000000,
> > +               .phys = 0x200000000,
> > +               .size = 8UL * SZ_1G,
> > +               .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
> > +                        PTE_BLOCK_NON_SHARE |
> > +                        PTE_BLOCK_PXN | PTE_BLOCK_UXN
> > +       }, {
> > +               /* I/O */
> > +               .virt = 0x500000000,
> > +               .phys = 0x500000000,
> > +               .size = 2UL * SZ_1G,
> > +               .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
> > +                        PTE_BLOCK_NON_SHARE |
> > +                        PTE_BLOCK_PXN | PTE_BLOCK_UXN
> > +       }, {
> > +               /* I/O */
> > +               .virt = 0x680000000,
> > +               .phys = 0x680000000,
> > +               .size = SZ_512M,
> > +               .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
> > +                        PTE_BLOCK_NON_SHARE |
> > +                        PTE_BLOCK_PXN | PTE_BLOCK_UXN
> > +       }, {
> > +               /* PCIE */
> > +               .virt = 0x6a0000000,
> > +               .phys = 0x6a0000000,
> > +               .size = SZ_512M,
> > +               .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRE) |
> > +                        PTE_BLOCK_INNER_SHARE |
> > +                        PTE_BLOCK_PXN | PTE_BLOCK_UXN
> > +       }, {
> > +               /* PCIE */
> > +               .virt = 0x6c0000000,
> > +               .phys = 0x6c0000000,
> > +               .size = SZ_1G,
> > +               .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRE) |
> > +                        PTE_BLOCK_INNER_SHARE |
> > +                        PTE_BLOCK_PXN | PTE_BLOCK_UXN
> > +       }, {
> > +               /* RAM */
> > +               .virt = 0x800000000,
> > +               .phys = 0x800000000,
> > +               .size = 8UL * SZ_1G,
> > +               .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
> > +                        PTE_BLOCK_INNER_SHARE
> > +       }, {
> > +               /* Empty entry for framebuffer */
> > +               0,
> > +       }, {
> > +               /* List terminator */
> > +               0,
> > +       }
> > +};
> > +
> > +struct mm_region *mem_map = apple_mem_map;
> > +
> > +int board_init(void)
> > +{
> > +       return 0;
> > +}
> > +
> > +int dram_init(void)
> > +{
> > +       int index, node, ret;
> > +       fdt_addr_t base;
> > +       fdt_size_t size;
> > +
> > +       ret = fdtdec_setup_mem_size_base();
> > +       if (ret)
> > +               return ret;
> > +
> > +       /* Update RAM mapping. */
> 
> nits: please remove the ending .

Really?  The current codebase has both styles...  But sure, I can make
that change.

> > +       index = ARRAY_SIZE(apple_mem_map) - 3;
> > +       apple_mem_map[index].virt = gd->ram_base;
> > +       apple_mem_map[index].phys = gd->ram_base;
> > +       apple_mem_map[index].size = gd->ram_size;
> > +
> > +       node = fdt_path_offset(gd->fdt_blob, "/chosen/framebuffer");
> > +       if (node < 0)
> > +               return 0;
> > +
> > +       base = fdtdec_get_addr_size(gd->fdt_blob, node, "reg", &size);
> > +       if (base == FDT_ADDR_T_NONE)
> > +               return 0;
> > +
> > +       /* Add framebuffer mapping. */
> 
> ditto
> 
> > +       index = ARRAY_SIZE(apple_mem_map) - 2;
> > +       apple_mem_map[index].virt = base;
> > +       apple_mem_map[index].phys = base;
> > +       apple_mem_map[index].size = size;
> > +       apple_mem_map[index].attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL_NC) |
> > +               PTE_BLOCK_INNER_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN;
> > +
> > +       return 0;
> > +}
> > +
> > +int dram_init_banksize(void)
> > +{
> > +       return fdtdec_setup_memory_banksize();
> > +}
> > +
> > +#define APPLE_WDT_BASE         0x23d2b0000ULL
> > +
> > +#define APPLE_WDT_SYS_CTL_ENABLE       BIT(2)
> > +
> > +typedef struct apple_wdt {
> > +       u32     reserved0[3];
> > +       u32     chip_ctl;
> > +       u32     sys_tmr;
> > +       u32     sys_cmp;
> > +       u32     reserved1;
> > +       u32     sys_ctl;
> > +} apple_wdt_t;
> > +
> > +void reset_cpu(void)
> 
> This looks like we should add a new sysreset driver for Apple Arm SoC.

Could be.  This is actually a watchdog device that is used to reset
the machine.  So I suppose I should add a watchdog driver and use
SYSRESET_WATCHDOG.  Slight worry is that this relies on a lot more DM
code.  Does that mean the reset isn't available during early boot?

If it is acceptable, I would like to add the watchdog device in a
future series, once the device tree bindings for the watchdog have
been hammered out.

> > +{
> > +       apple_wdt_t *wdt = (apple_wdt_t *)APPLE_WDT_BASE;
> > +
> > +       writel(0, &wdt->sys_cmp);
> > +       writel(APPLE_WDT_SYS_CTL_ENABLE, &wdt->sys_ctl);
> > +
> > +       while(1)
> > +               wfi();
> > +}
> > +
> > +extern long fw_dtb_pointer;
> > +
> > +void *board_fdt_blob_setup(void)
> > +{
> > +       return (void *)fw_dtb_pointer;
> > +}
> > +
> > +ulong board_get_usable_ram_top(ulong total_size)
> > +{
> > +       /*
> > +        * Top part of RAM is used by firmware for things like the
> > +        * framebuffer.  This gives us plenty of room to play with.
> > +        */
> > +       return 0x980000000;
> > +}
> > diff --git a/arch/arm/mach-apple/lowlevel_init.S b/arch/arm/mach-apple/lowlevel_init.S
> > new file mode 100644
> > index 0000000000..0f5313163e
> > --- /dev/null
> > +++ b/arch/arm/mach-apple/lowlevel_init.S
> > @@ -0,0 +1,16 @@
> > +/* SPDX-License-Identifier: GPL-2.0+ */
> > +/*
> > + * (C) Copyright 2021 Mark Kettenis <kettenis@openbsd.org>
> > + */
> > +
> > +.align 8
> > +.global fw_dtb_pointer
> > +fw_dtb_pointer:
> > +       .quad   0
> 
> Is this filled in by m1n1?
> 
> > +
> > +.global save_boot_params
> > +save_boot_params:
> > +       adr     x1, fw_dtb_pointer
> > +       str     x0, [x1]
> > +
> > +       b       save_boot_params_ret
> > diff --git a/configs/apple_m1_defconfig b/configs/apple_m1_defconfig
> > new file mode 100644
> > index 0000000000..a7ae15576b
> > --- /dev/null
> > +++ b/configs/apple_m1_defconfig
> > @@ -0,0 +1,14 @@
> > +CONFIG_ARM=y
> > +CONFIG_ARCH_APPLE=y
> > +# CONFIG_DISPLAY_CPUINFO is not set
> > +# CONFIG_MMC is not set
> > +# CONFIG_NET is not set
> > +CONFIG_VIDEO_SIMPLE=y
> > +CONFIG_DISPLAY_BOARDINFO_LATE=y
> > +CONFIG_USB_XHCI_HCD=y
> > +CONFIG_USB_XHCI_DWC3=y
> > +CONFIG_USB_KEYBOARD=y
> > +CONFIG_USB_STORAGE=y
> > +CONFIG_USE_PREBOOT=y
> > +CONFIG_PREBOOT="usb start"
> > +# CONFIG_GENERATE_SMBIOS_TABLE is not set
> > diff --git a/include/configs/apple.h b/include/configs/apple.h
> > new file mode 100644
> > index 0000000000..1c246af002
> > --- /dev/null
> > +++ b/include/configs/apple.h
> > @@ -0,0 +1,38 @@
> > +#ifndef __CONFIG_H
> > +#define __CONFIG_H
> > +
> > +#include <linux/sizes.h>
> > +
> > +#define CONFIG_SYS_LOAD_ADDR   0x880000000
> > +
> > +#define CONFIG_SYS_SDRAM_BASE  0x880000000
> > +
> > +#define CONFIG_LNX_KRNL_IMG_TEXT_OFFSET_BASE   CONFIG_SYS_TEXT_BASE
> > +
> > +/* Environment */
> > +#define ENV_DEVICE_SETTINGS \
> > +       "stdin=serial,usbkbd\0" \
> > +       "stdout=serial,vidconsole\0" \
> > +       "stderr=serial,vidconsole\0"
> > +
> > +#define ENV_MEM_LAYOUT_SETTINGS \
> > +       "fdt_addr_r=0x960100000\0" \
> > +       "kernel_addr_r=0x960200000\0"
> > +
> > +#if CONFIG_IS_ENABLED(CMD_USB)
> > +       #define BOOT_TARGET_USB(func) func(USB, usb, 0)
> > +#else
> > +       #define BOOT_TARGET_USB(func)
> > +#endif
> > +
> > +#define BOOT_TARGET_DEVICES(func) \
> > +       BOOT_TARGET_USB(func)
> > +
> > +#include <config_distro_bootcmd.h>
> > +
> > +#define CONFIG_EXTRA_ENV_SETTINGS \
> > +       ENV_DEVICE_SETTINGS \
> > +       ENV_MEM_LAYOUT_SETTINGS \
> > +       BOOTENV
> > +
> > +#endif
> 
> Regards,
> Bin
> 

^ permalink raw reply	[flat|nested] 46+ messages in thread

* Re: [PATCH 2/5] serial: s5p: Add Apple M1 support
  2021-09-19  1:11   ` Bin Meng
@ 2021-09-19 20:30     ` Mark Kettenis
  0 siblings, 0 replies; 46+ messages in thread
From: Mark Kettenis @ 2021-09-19 20:30 UTC (permalink / raw)
  To: Bin Meng
  Cc: kettenis, u-boot, oliver.graute, ycliang, kishon, priyanka.jain,
	stephan, padmarao.begari, tianrui-wei, michael, xypron.glpk, sjg,
	ashe, bin.meng, michal.simek, wasim.khan, ye.li, igor.opaniuk,
	sr, takahiro.akashi, vabhav.sharma, weijie.gao, p.yadav,
	andriy.shevchenko

> From: Bin Meng <bmeng.cn@gmail.com>
> Date: Sun, 19 Sep 2021 09:11:06 +0800
> 
> Hi Mark,
> 
> On Sat, Sep 18, 2021 at 9:55 PM Mark Kettenis <kettenis@openbsd.org> wrote:
> >
> > Apple M1 SoCs include an S5L UART which is a variant of the S5P
> > UART.  Add support for this variant and enable it by default
> > on Apple SoCs.
> >
> > Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
> > ---
> >  arch/arm/include/asm/arch-m1/clk.h  | 11 ++++++++
> >  arch/arm/include/asm/arch-m1/uart.h | 41 +++++++++++++++++++++++++++++
> >  arch/arm/mach-apple/board.c         |  5 ++++
> >  drivers/serial/Kconfig              |  2 +-
> >  drivers/serial/serial_s5p.c         | 22 ++++++++++++++++
> >  5 files changed, 80 insertions(+), 1 deletion(-)
> >  create mode 100644 arch/arm/include/asm/arch-m1/clk.h
> >  create mode 100644 arch/arm/include/asm/arch-m1/uart.h
> >
> > diff --git a/arch/arm/include/asm/arch-m1/clk.h b/arch/arm/include/asm/arch-m1/clk.h
> > new file mode 100644
> > index 0000000000..f4326d0c0f
> > --- /dev/null
> > +++ b/arch/arm/include/asm/arch-m1/clk.h
> > @@ -0,0 +1,11 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/*
> > + * Copyright (C) 2021 Mark Kettenis <kettenis@openbsd.org>
> > + */
> > +
> > +#ifndef __ASM_ARM_ARCH_CLK_H_
> > +#define __ASM_ARM_ARCH_CLK_H_
> > +
> > +unsigned long get_uart_clk(int dev_index);
> > +
> > +#endif
> > diff --git a/arch/arm/include/asm/arch-m1/uart.h b/arch/arm/include/asm/arch-m1/uart.h
> > new file mode 100644
> > index 0000000000..d2a17a221e
> > --- /dev/null
> > +++ b/arch/arm/include/asm/arch-m1/uart.h
> > @@ -0,0 +1,41 @@
> > +/* SPDX-License-Identifier: GPL-2.0+ */
> > +/*
> > + * (C) Copyright 2009 Samsung Electronics
> > + * Minkyu Kang <mk7.kang@samsung.com>
> > + * Heungjun Kim <riverful.kim@samsung.com>
> > + */
> > +
> > +#ifndef __ASM_ARCH_UART_H_
> > +#define __ASM_ARCH_UART_H_
> > +
> > +#ifndef __ASSEMBLY__
> > +/* baudrate rest value */
> > +union br_rest {
> > +       unsigned short  slot;           /* udivslot */
> > +       unsigned char   value;          /* ufracval */
> > +};
> > +
> > +struct s5p_uart {
> > +       unsigned int    ulcon;
> > +       unsigned int    ucon;
> > +       unsigned int    ufcon;
> > +       unsigned int    umcon;
> > +       unsigned int    utrstat;
> > +       unsigned int    uerstat;
> > +       unsigned int    ufstat;
> > +       unsigned int    umstat;
> > +       unsigned int    utxh;
> > +       unsigned int    urxh;
> > +       unsigned int    ubrdiv;
> > +       union br_rest   rest;
> > +       unsigned char   res3[0x3fd0];
> > +};
> 
> This does not look correct. This should be declared in the s5p UART
> driver header instead of SoC's

Well, this is the status quo for this driver.  There are several
variations of the hardware with slightly different register layouts
and the header file trick is how that is handled.

> > +
> > +static inline int s5p_uart_divslot(void)
> > +{
> > +       return 0;
> > +}
> > +
> > +#endif /* __ASSEMBLY__ */
> > +
> > +#endif
> > diff --git a/arch/arm/mach-apple/board.c b/arch/arm/mach-apple/board.c
> > index 0c8b35292e..8bc5c2f69e 100644
> > --- a/arch/arm/mach-apple/board.c
> > +++ b/arch/arm/mach-apple/board.c
> > @@ -156,3 +156,8 @@ ulong board_get_usable_ram_top(ulong total_size)
> >          */
> >         return 0x980000000;
> >  }
> > +
> > +unsigned long get_uart_clk(int dev_index)
> > +{
> > +       return 24000000;
> > +}
> > diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
> > index 93348c0929..c3ac773929 100644
> > --- a/drivers/serial/Kconfig
> > +++ b/drivers/serial/Kconfig
> > @@ -719,7 +719,7 @@ config ROCKCHIP_SERIAL
> >
> >  config S5P_SERIAL
> >         bool "Support for Samsung S5P UART"
> > -       depends on ARCH_EXYNOS || ARCH_S5PC1XX
> > +       depends on ARCH_APPLE || ARCH_EXYNOS || ARCH_S5PC1XX
> >         default y
> >         help
> >           Select this to enable Samsung S5P UART support.
> > diff --git a/drivers/serial/serial_s5p.c b/drivers/serial/serial_s5p.c
> > index 6d09952a5d..eb770d9b62 100644
> > --- a/drivers/serial/serial_s5p.c
> > +++ b/drivers/serial/serial_s5p.c
> > @@ -21,12 +21,21 @@
> >
> >  DECLARE_GLOBAL_DATA_PTR;
> >
> > +#ifdef CONFIG_ARCH_APPLE
> > +#define RX_FIFO_COUNT_SHIFT    0
> > +#define RX_FIFO_COUNT_MASK     (0xf << RX_FIFO_COUNT_SHIFT)
> > +#define RX_FIFO_FULL           (1 << 8)
> > +#define TX_FIFO_COUNT_SHIFT    4
> > +#define TX_FIFO_COUNT_MASK     (0xf << TX_FIFO_COUNT_SHIFT)
> > +#define TX_FIFO_FULL           (1 << 9)
> 
> So different bit positions for RX/TX FIFIO register but still it is
> s5p compatible, strange ...

Yeah, the Apple hardware is based on an older variant of the s5p that
had a smaller FIFO.  The size of the FIFO was increased somewhere
along the way and the bits were moved...

> > +#else
> >  #define RX_FIFO_COUNT_SHIFT    0
> >  #define RX_FIFO_COUNT_MASK     (0xff << RX_FIFO_COUNT_SHIFT)
> >  #define RX_FIFO_FULL           (1 << 8)
> >  #define TX_FIFO_COUNT_SHIFT    16
> >  #define TX_FIFO_COUNT_MASK     (0xff << TX_FIFO_COUNT_SHIFT)
> >  #define TX_FIFO_FULL           (1 << 24)
> > +#endif
> >
> >  /* Information about a serial port */
> >  struct s5p_serial_plat {
> > @@ -83,7 +92,11 @@ static void __maybe_unused s5p_serial_baud(struct s5p_uart *uart, uint uclk,
> >         if (s5p_uart_divslot())
> >                 writew(udivslot[val % 16], &uart->rest.slot);
> >         else
> > +#ifdef CONFIG_ARCH_APPLE
> > +               writel(val % 16, &uart->rest.value);
> 
> This looks like we should add a property in DT like "reg-width" to
> control such behavior?

There actually is such a property in the binding called
"reg-io-width".  So I suppose I should use that.

> > +#else
> >                 writeb(val % 16, &uart->rest.value);
> > +#endif
> >  }
> >
> >  #ifndef CONFIG_SPL_BUILD
> > @@ -148,7 +161,11 @@ static int s5p_serial_getc(struct udevice *dev)
> >                 return -EAGAIN;
> >
> >         serial_err_check(uart, 0);
> > +#ifdef CONFIG_ARCH_APPLE
> > +       return (int)(readl(&uart->urxh) & 0xff);
> > +#else
> >         return (int)(readb(&uart->urxh) & 0xff);
> > +#endif
> >  }
> >
> >  static int s5p_serial_putc(struct udevice *dev, const char ch)
> > @@ -159,7 +176,11 @@ static int s5p_serial_putc(struct udevice *dev, const char ch)
> >         if (readl(&uart->ufstat) & TX_FIFO_FULL)
> >                 return -EAGAIN;
> >
> > +#ifdef CONFIG_ARCH_APPLE
> > +       writel(ch, &uart->utxh);
> > +#else
> >         writeb(ch, &uart->utxh);
> > +#endif
> >         serial_err_check(uart, 1);
> >
> >         return 0;
> > @@ -201,6 +222,7 @@ static const struct dm_serial_ops s5p_serial_ops = {
> >
> >  static const struct udevice_id s5p_serial_ids[] = {
> >         { .compatible = "samsung,exynos4210-uart" },
> > +       { .compatible = "apple,s5l-uart" },
> >         { }
> >  };
> 
> Regards,
> Bin
> 

^ permalink raw reply	[flat|nested] 46+ messages in thread

* Re: [PATCH 1/5] arm: apple: Add initial support for Apple's M1 SoC
  2021-09-19  1:17     ` Bin Meng
@ 2021-09-19 20:33       ` Mark Kettenis
  2021-09-21 12:42         ` Tom Rini
  0 siblings, 1 reply; 46+ messages in thread
From: Mark Kettenis @ 2021-09-19 20:33 UTC (permalink / raw)
  To: Bin Meng
  Cc: kettenis, u-boot, bharat.gooty, rayagonda.kokatanur,
	oliver.graute, bin.meng, ycliang, tianrui-wei, stephan,
	padmarao.begari, kishon, xypron.glpk, michael, masami.hiramatsu,
	sjg, ashe, wasim.khan, michal.simek, igor.opaniuk, hs, ye.li, sr,
	vabhav.sharma, marek.behun, weijie.gao, takahiro.akashi,
	andriy.shevchenko, p.yadav

> From: Bin Meng <bmeng.cn@gmail.com>
> Date: Sun, 19 Sep 2021 09:17:07 +0800
> 
> Hi Mark,
> 
> On Sun, Sep 19, 2021 at 9:04 AM Bin Meng <bmeng.cn@gmail.com> wrote:
> >
> > Hi Mark,
> >
> > On Sat, Sep 18, 2021 at 9:55 PM Mark Kettenis <kettenis@openbsd.org> wrote:
> > >
> > > Add support for Apple's M1 SoC that is used in "Apple Silicon"
> > > Macs.  This builds a basic U-Boot that can be used as a payload
> > > for the m1n1 boot loader being developed by the Asahi Linux
> > > project.
> > >
> > > Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
> > > ---
> > >  arch/arm/Kconfig                    |  22 ++++
> > >  arch/arm/Makefile                   |   1 +
> > >  arch/arm/mach-apple/Kconfig         |  18 ++++
> > >  arch/arm/mach-apple/Makefile        |   4 +
> > >  arch/arm/mach-apple/board.c         | 158 ++++++++++++++++++++++++++++
> > >  arch/arm/mach-apple/lowlevel_init.S |  16 +++
> > >  configs/apple_m1_defconfig          |  14 +++
> > >  include/configs/apple.h             |  38 +++++++
> > >  8 files changed, 271 insertions(+)
> > >  create mode 100644 arch/arm/mach-apple/Kconfig
> > >  create mode 100644 arch/arm/mach-apple/Makefile
> > >  create mode 100644 arch/arm/mach-apple/board.c
> > >  create mode 100644 arch/arm/mach-apple/lowlevel_init.S
> > >  create mode 100644 configs/apple_m1_defconfig
> > >  create mode 100644 include/configs/apple.h
> > >
> > > diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> > > index b5bd3284cd..7cdea1f615 100644
> > > --- a/arch/arm/Kconfig
> > > +++ b/arch/arm/Kconfig
> > > @@ -895,6 +895,26 @@ config ARCH_NEXELL
> > >         select DM
> > >         select GPIO_EXTRA_HEADER
> > >
> > > +config ARCH_APPLE
> > > +       bool "Apple SoCs"
> > > +       select ARM64
> > > +       select LINUX_KERNEL_IMAGE_HEADER
> > > +       select POSITION_INDEPENDENT
> > > +       select BLK
> > > +       select DM
> > > +       select DM_KEYBOARD
> > > +       select DM_SERIAL
> > > +       select DM_USB
> > > +       select DM_VIDEO
> > > +       select CMD_USB
> > > +       select MISC
> > > +       select OF_CONTROL
> > > +       select OF_BOARD
> > > +       select USB
> > > +       imply CMD_DM
> > > +       imply CMD_GPT
> > > +       imply DISTRO_DEFAULTS
> > > +
> > >  config ARCH_OWL
> > >         bool "Actions Semi OWL SoCs"
> > >         select DM
> > > @@ -1932,6 +1952,8 @@ config ISW_ENTRY_ADDR
> > >           image headers.
> > >  endif
> > >
> > > +source "arch/arm/mach-apple/Kconfig"
> > > +
> > >  source "arch/arm/mach-aspeed/Kconfig"
> > >
> > >  source "arch/arm/mach-at91/Kconfig"
> > > diff --git a/arch/arm/Makefile b/arch/arm/Makefile
> > > index c68e598a67..44178c204b 100644
> > > --- a/arch/arm/Makefile
> > > +++ b/arch/arm/Makefile
> > > @@ -51,6 +51,7 @@ PLATFORM_CPPFLAGS += $(arch-y) $(tune-y)
> > >
> > >  # Machine directory name.  This list is sorted alphanumerically
> > >  # by CONFIG_* macro name.
> > > +machine-$(CONFIG_ARCH_APPLE)           += apple
> > >  machine-$(CONFIG_ARCH_ASPEED)          += aspeed
> > >  machine-$(CONFIG_ARCH_AT91)            += at91
> > >  machine-$(CONFIG_ARCH_BCM283X)         += bcm283x
> > > diff --git a/arch/arm/mach-apple/Kconfig b/arch/arm/mach-apple/Kconfig
> > > new file mode 100644
> > > index 0000000000..66cab91b2a
> > > --- /dev/null
> > > +++ b/arch/arm/mach-apple/Kconfig
> > > @@ -0,0 +1,18 @@
> > > +if ARCH_APPLE
> > > +
> > > +config SYS_TEXT_BASE
> > > +       default 0x00000000
> > > +
> > > +config SYS_CONFIG_NAME
> > > +       default "apple"
> > > +
> > > +config SYS_SOC
> > > +       default "m1"
> > > +
> > > +config SYS_MALLOC_LEN
> > > +       default 0x4000000
> > > +
> > > +config SYS_MALLOC_F_LEN
> > > +       default 0x4000
> > > +
> > > +endif
> > > diff --git a/arch/arm/mach-apple/Makefile b/arch/arm/mach-apple/Makefile
> > > new file mode 100644
> > > index 0000000000..e74a8c9df1
> > > --- /dev/null
> > > +++ b/arch/arm/mach-apple/Makefile
> > > @@ -0,0 +1,4 @@
> > > +# SPDX-License-Identifier: GPL-2.0+
> > > +
> > > +obj-y += board.o
> > > +obj-y += lowlevel_init.o
> > > diff --git a/arch/arm/mach-apple/board.c b/arch/arm/mach-apple/board.c
> > > new file mode 100644
> > > index 0000000000..0c8b35292e
> > > --- /dev/null
> > > +++ b/arch/arm/mach-apple/board.c
> > > @@ -0,0 +1,158 @@
> > > +// SPDX-License-Identifier: GPL-2.0+
> > > +/*
> > > + * (C) Copyright 2021 Mark Kettenis <kettenis@openbsd.org>
> > > + */
> > > +
> > > +#include <common.h>
> > > +#include <efi_loader.h>
> > > +
> > > +#include <asm/armv8/mmu.h>
> > > +#include <asm/global_data.h>
> > > +#include <asm/io.h>
> > > +#include <asm/system.h>
> > > +
> > > +DECLARE_GLOBAL_DATA_PTR;
> > > +
> > > +static struct mm_region apple_mem_map[] = {
> > > +       {
> > > +               /* I/O */
> > > +               .virt = 0x200000000,
> > > +               .phys = 0x200000000,
> > > +               .size = 8UL * SZ_1G,
> > > +               .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
> > > +                        PTE_BLOCK_NON_SHARE |
> > > +                        PTE_BLOCK_PXN | PTE_BLOCK_UXN
> > > +       }, {
> > > +               /* I/O */
> > > +               .virt = 0x500000000,
> > > +               .phys = 0x500000000,
> > > +               .size = 2UL * SZ_1G,
> > > +               .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
> > > +                        PTE_BLOCK_NON_SHARE |
> > > +                        PTE_BLOCK_PXN | PTE_BLOCK_UXN
> > > +       }, {
> > > +               /* I/O */
> > > +               .virt = 0x680000000,
> > > +               .phys = 0x680000000,
> > > +               .size = SZ_512M,
> > > +               .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
> > > +                        PTE_BLOCK_NON_SHARE |
> > > +                        PTE_BLOCK_PXN | PTE_BLOCK_UXN
> > > +       }, {
> > > +               /* PCIE */
> > > +               .virt = 0x6a0000000,
> > > +               .phys = 0x6a0000000,
> > > +               .size = SZ_512M,
> > > +               .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRE) |
> > > +                        PTE_BLOCK_INNER_SHARE |
> > > +                        PTE_BLOCK_PXN | PTE_BLOCK_UXN
> > > +       }, {
> > > +               /* PCIE */
> > > +               .virt = 0x6c0000000,
> > > +               .phys = 0x6c0000000,
> > > +               .size = SZ_1G,
> > > +               .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRE) |
> > > +                        PTE_BLOCK_INNER_SHARE |
> > > +                        PTE_BLOCK_PXN | PTE_BLOCK_UXN
> > > +       }, {
> > > +               /* RAM */
> > > +               .virt = 0x800000000,
> > > +               .phys = 0x800000000,
> > > +               .size = 8UL * SZ_1G,
> > > +               .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
> > > +                        PTE_BLOCK_INNER_SHARE
> > > +       }, {
> > > +               /* Empty entry for framebuffer */
> > > +               0,
> > > +       }, {
> > > +               /* List terminator */
> > > +               0,
> > > +       }
> > > +};
> > > +
> > > +struct mm_region *mem_map = apple_mem_map;
> > > +
> > > +int board_init(void)
> > > +{
> > > +       return 0;
> > > +}
> > > +
> > > +int dram_init(void)
> > > +{
> > > +       int index, node, ret;
> > > +       fdt_addr_t base;
> > > +       fdt_size_t size;
> > > +
> > > +       ret = fdtdec_setup_mem_size_base();
> > > +       if (ret)
> > > +               return ret;
> > > +
> > > +       /* Update RAM mapping. */
> >
> > nits: please remove the ending .
> >
> > > +       index = ARRAY_SIZE(apple_mem_map) - 3;
> 
> This is error prone. Someone else updating apple_mem_map may create an
> incorrect index for us.

I don't see a better way without introducing more complexity.

> > > +       apple_mem_map[index].virt = gd->ram_base;
> > > +       apple_mem_map[index].phys = gd->ram_base;
> > > +       apple_mem_map[index].size = gd->ram_size;
> > > +
> > > +       node = fdt_path_offset(gd->fdt_blob, "/chosen/framebuffer");
> > > +       if (node < 0)
> > > +               return 0;
> > > +
> > > +       base = fdtdec_get_addr_size(gd->fdt_blob, node, "reg", &size);
> > > +       if (base == FDT_ADDR_T_NONE)
> > > +               return 0;
> > > +
> > > +       /* Add framebuffer mapping. */
> >
> > ditto
> >
> > > +       index = ARRAY_SIZE(apple_mem_map) - 2;
> > > +       apple_mem_map[index].virt = base;
> > > +       apple_mem_map[index].phys = base;
> > > +       apple_mem_map[index].size = size;
> > > +       apple_mem_map[index].attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL_NC) |
> > > +               PTE_BLOCK_INNER_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN;
> > > +
> > > +       return 0;
> > > +}
> > > +
> > > +int dram_init_banksize(void)
> > > +{
> > > +       return fdtdec_setup_memory_banksize();
> > > +}
> > > +
> > > +#define APPLE_WDT_BASE         0x23d2b0000ULL
> > > +
> > > +#define APPLE_WDT_SYS_CTL_ENABLE       BIT(2)
> > > +
> > > +typedef struct apple_wdt {
> > > +       u32     reserved0[3];
> > > +       u32     chip_ctl;
> > > +       u32     sys_tmr;
> > > +       u32     sys_cmp;
> > > +       u32     reserved1;
> > > +       u32     sys_ctl;
> > > +} apple_wdt_t;
> > > +
> > > +void reset_cpu(void)
> >
> > This looks like we should add a new sysreset driver for Apple Arm SoC.
> >
> > > +{
> > > +       apple_wdt_t *wdt = (apple_wdt_t *)APPLE_WDT_BASE;
> > > +
> > > +       writel(0, &wdt->sys_cmp);
> > > +       writel(APPLE_WDT_SYS_CTL_ENABLE, &wdt->sys_ctl);
> > > +
> > > +       while(1)
> > > +               wfi();
> > > +}
> > > +
> > > +extern long fw_dtb_pointer;
> > > +
> > > +void *board_fdt_blob_setup(void)
> > > +{
> > > +       return (void *)fw_dtb_pointer;
> > > +}
> > > +
> > > +ulong board_get_usable_ram_top(ulong total_size)
> > > +{
> > > +       /*
> > > +        * Top part of RAM is used by firmware for things like the
> > > +        * framebuffer.  This gives us plenty of room to play with.
> > > +        */
> > > +       return 0x980000000;
> > > +}
> > > diff --git a/arch/arm/mach-apple/lowlevel_init.S b/arch/arm/mach-apple/lowlevel_init.S
> > > new file mode 100644
> > > index 0000000000..0f5313163e
> > > --- /dev/null
> > > +++ b/arch/arm/mach-apple/lowlevel_init.S
> > > @@ -0,0 +1,16 @@
> > > +/* SPDX-License-Identifier: GPL-2.0+ */
> > > +/*
> > > + * (C) Copyright 2021 Mark Kettenis <kettenis@openbsd.org>
> > > + */
> > > +
> > > +.align 8
> > > +.global fw_dtb_pointer
> > > +fw_dtb_pointer:
> > > +       .quad   0
> >
> > Is this filled in by m1n1?
> 
> Sorry I misread, so this is passed by m1n1 and filled in by U-Boot. I
> think we should stop using CONFIG_OF_BOARD, and for such case we
> should use CONFIG_OF_PRIOR_STAGE.

Yes, CONFIG_OF_PRIOR_STAGE would work as well.  But Tom was talking
about removing that option in favour of CONFIG_OF_BOARD the other day.

> > > +
> > > +.global save_boot_params
> > > +save_boot_params:
> > > +       adr     x1, fw_dtb_pointer
> > > +       str     x0, [x1]
> > > +
> > > +       b       save_boot_params_ret
> 
> Regards,
> Bin
> 

^ permalink raw reply	[flat|nested] 46+ messages in thread

* Re: [PATCH 1/5] arm: apple: Add initial support for Apple's M1 SoC
  2021-09-18 13:54 ` [PATCH 1/5] arm: apple: Add initial support for Apple's M1 SoC Mark Kettenis
  2021-09-19  1:04   ` Bin Meng
@ 2021-09-20  3:15   ` Simon Glass
  2021-09-20  8:49     ` Mark Kettenis
  1 sibling, 1 reply; 46+ messages in thread
From: Simon Glass @ 2021-09-20  3:15 UTC (permalink / raw)
  To: Mark Kettenis
  Cc: U-Boot Mailing List, Bharat Gooty, Rayagonda Kokatanur,
	Oliver Graute, Bin Meng, Leo Yu-Chi Liang, Tianrui Wei,
	Stephan Gerhold, Padmarao Begari, Kishon Vijay Abraham I,
	Heinrich Schuchardt, Michael Walle, Masami Hiramatsu,
	Asherah Connor, Wasim Khan, Michal Simek, Igor Opaniuk,
	Heiko Schocher, Ye Li, Stefan Roese, Vabhav Sharma,
	Marek Behún, Weijie Gao, AKASHI Takahiro, Andy Shevchenko,
	Pratyush Yadav

Hi Mark,

On Sat, 18 Sept 2021 at 07:55, Mark Kettenis <kettenis@openbsd.org> wrote:
>
> Add support for Apple's M1 SoC that is used in "Apple Silicon"
> Macs.  This builds a basic U-Boot that can be used as a payload
> for the m1n1 boot loader being developed by the Asahi Linux
> project.
>
> Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
> ---
>  arch/arm/Kconfig                    |  22 ++++
>  arch/arm/Makefile                   |   1 +
>  arch/arm/mach-apple/Kconfig         |  18 ++++
>  arch/arm/mach-apple/Makefile        |   4 +
>  arch/arm/mach-apple/board.c         | 158 ++++++++++++++++++++++++++++
>  arch/arm/mach-apple/lowlevel_init.S |  16 +++
>  configs/apple_m1_defconfig          |  14 +++
>  include/configs/apple.h             |  38 +++++++
>  8 files changed, 271 insertions(+)
>  create mode 100644 arch/arm/mach-apple/Kconfig
>  create mode 100644 arch/arm/mach-apple/Makefile
>  create mode 100644 arch/arm/mach-apple/board.c
>  create mode 100644 arch/arm/mach-apple/lowlevel_init.S
>  create mode 100644 configs/apple_m1_defconfig
>  create mode 100644 include/configs/apple.h
>
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index b5bd3284cd..7cdea1f615 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -895,6 +895,26 @@ config ARCH_NEXELL
>         select DM
>         select GPIO_EXTRA_HEADER
>
> +config ARCH_APPLE
> +       bool "Apple SoCs"
> +       select ARM64
> +       select LINUX_KERNEL_IMAGE_HEADER
> +       select POSITION_INDEPENDENT
> +       select BLK
> +       select DM
> +       select DM_KEYBOARD
> +       select DM_SERIAL
> +       select DM_USB
> +       select DM_VIDEO
> +       select CMD_USB
> +       select MISC
> +       select OF_CONTROL
> +       select OF_BOARD
> +       select USB
> +       imply CMD_DM
> +       imply CMD_GPT
> +       imply DISTRO_DEFAULTS

Suggest sorting these

> +
>  config ARCH_OWL
>         bool "Actions Semi OWL SoCs"
>         select DM
> @@ -1932,6 +1952,8 @@ config ISW_ENTRY_ADDR
>           image headers.
>  endif
>
> +source "arch/arm/mach-apple/Kconfig"
> +
>  source "arch/arm/mach-aspeed/Kconfig"
>
>  source "arch/arm/mach-at91/Kconfig"
> diff --git a/arch/arm/Makefile b/arch/arm/Makefile
> index c68e598a67..44178c204b 100644
> --- a/arch/arm/Makefile
> +++ b/arch/arm/Makefile
> @@ -51,6 +51,7 @@ PLATFORM_CPPFLAGS += $(arch-y) $(tune-y)
>
>  # Machine directory name.  This list is sorted alphanumerically
>  # by CONFIG_* macro name.
> +machine-$(CONFIG_ARCH_APPLE)           += apple
>  machine-$(CONFIG_ARCH_ASPEED)          += aspeed
>  machine-$(CONFIG_ARCH_AT91)            += at91
>  machine-$(CONFIG_ARCH_BCM283X)         += bcm283x
> diff --git a/arch/arm/mach-apple/Kconfig b/arch/arm/mach-apple/Kconfig
> new file mode 100644
> index 0000000000..66cab91b2a
> --- /dev/null
> +++ b/arch/arm/mach-apple/Kconfig
> @@ -0,0 +1,18 @@
> +if ARCH_APPLE
> +
> +config SYS_TEXT_BASE
> +       default 0x00000000
> +
> +config SYS_CONFIG_NAME
> +       default "apple"
> +
> +config SYS_SOC
> +       default "m1"
> +
> +config SYS_MALLOC_LEN
> +       default 0x4000000
> +
> +config SYS_MALLOC_F_LEN
> +       default 0x4000
> +
> +endif
> diff --git a/arch/arm/mach-apple/Makefile b/arch/arm/mach-apple/Makefile
> new file mode 100644
> index 0000000000..e74a8c9df1
> --- /dev/null
> +++ b/arch/arm/mach-apple/Makefile
> @@ -0,0 +1,4 @@
> +# SPDX-License-Identifier: GPL-2.0+
> +
> +obj-y += board.o
> +obj-y += lowlevel_init.o
> diff --git a/arch/arm/mach-apple/board.c b/arch/arm/mach-apple/board.c
> new file mode 100644
> index 0000000000..0c8b35292e
> --- /dev/null
> +++ b/arch/arm/mach-apple/board.c
> @@ -0,0 +1,158 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * (C) Copyright 2021 Mark Kettenis <kettenis@openbsd.org>
> + */
> +
> +#include <common.h>
> +#include <efi_loader.h>
> +
> +#include <asm/armv8/mmu.h>
> +#include <asm/global_data.h>
> +#include <asm/io.h>
> +#include <asm/system.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +static struct mm_region apple_mem_map[] = {
> +       {
> +               /* I/O */
> +               .virt = 0x200000000,
> +               .phys = 0x200000000,
> +               .size = 8UL * SZ_1G,
> +               .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
> +                        PTE_BLOCK_NON_SHARE |
> +                        PTE_BLOCK_PXN | PTE_BLOCK_UXN
> +       }, {
> +               /* I/O */
> +               .virt = 0x500000000,
> +               .phys = 0x500000000,
> +               .size = 2UL * SZ_1G,
> +               .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
> +                        PTE_BLOCK_NON_SHARE |
> +                        PTE_BLOCK_PXN | PTE_BLOCK_UXN
> +       }, {
> +               /* I/O */
> +               .virt = 0x680000000,
> +               .phys = 0x680000000,
> +               .size = SZ_512M,
> +               .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
> +                        PTE_BLOCK_NON_SHARE |
> +                        PTE_BLOCK_PXN | PTE_BLOCK_UXN
> +       }, {
> +               /* PCIE */
> +               .virt = 0x6a0000000,
> +               .phys = 0x6a0000000,
> +               .size = SZ_512M,
> +               .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRE) |
> +                        PTE_BLOCK_INNER_SHARE |
> +                        PTE_BLOCK_PXN | PTE_BLOCK_UXN
> +       }, {
> +               /* PCIE */
> +               .virt = 0x6c0000000,
> +               .phys = 0x6c0000000,
> +               .size = SZ_1G,
> +               .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRE) |
> +                        PTE_BLOCK_INNER_SHARE |
> +                        PTE_BLOCK_PXN | PTE_BLOCK_UXN
> +       }, {
> +               /* RAM */
> +               .virt = 0x800000000,
> +               .phys = 0x800000000,
> +               .size = 8UL * SZ_1G,
> +               .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
> +                        PTE_BLOCK_INNER_SHARE
> +       }, {
> +               /* Empty entry for framebuffer */
> +               0,
> +       }, {
> +               /* List terminator */
> +               0,
> +       }
> +};
> +
> +struct mm_region *mem_map = apple_mem_map;
> +
> +int board_init(void)
> +{
> +       return 0;
> +}
> +
> +int dram_init(void)
> +{
> +       int index, node, ret;
> +       fdt_addr_t base;
> +       fdt_size_t size;
> +
> +       ret = fdtdec_setup_mem_size_base();
> +       if (ret)
> +               return ret;
> +
> +       /* Update RAM mapping. */

Do you want the period at the end of that?

> +       index = ARRAY_SIZE(apple_mem_map) - 3;
> +       apple_mem_map[index].virt = gd->ram_base;
> +       apple_mem_map[index].phys = gd->ram_base;
> +       apple_mem_map[index].size = gd->ram_size;
> +
> +       node = fdt_path_offset(gd->fdt_blob, "/chosen/framebuffer");

Can you use the ofnode interface here and below?

> +       if (node < 0)
> +               return 0;
> +
> +       base = fdtdec_get_addr_size(gd->fdt_blob, node, "reg", &size);
> +       if (base == FDT_ADDR_T_NONE)
> +               return 0;
> +
> +       /* Add framebuffer mapping. */
> +       index = ARRAY_SIZE(apple_mem_map) - 2;
> +       apple_mem_map[index].virt = base;
> +       apple_mem_map[index].phys = base;
> +       apple_mem_map[index].size = size;
> +       apple_mem_map[index].attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL_NC) |
> +               PTE_BLOCK_INNER_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN;
> +
> +       return 0;
> +}
> +
> +int dram_init_banksize(void)
> +{
> +       return fdtdec_setup_memory_banksize();
> +}
> +
> +#define APPLE_WDT_BASE         0x23d2b0000ULL

should be in DT I think, with a driver

> +
> +#define APPLE_WDT_SYS_CTL_ENABLE       BIT(2)
> +
> +typedef struct apple_wdt {

Needs comments

> +       u32     reserved0[3];
> +       u32     chip_ctl;
> +       u32     sys_tmr;
> +       u32     sys_cmp;
> +       u32     reserved1;
> +       u32     sys_ctl;
> +} apple_wdt_t;
> +
> +void reset_cpu(void)

You should add a sysreset driver, as Bin says.

> +{
> +       apple_wdt_t *wdt = (apple_wdt_t *)APPLE_WDT_BASE;
> +
> +       writel(0, &wdt->sys_cmp);
> +       writel(APPLE_WDT_SYS_CTL_ENABLE, &wdt->sys_ctl);
> +
> +       while(1)
> +               wfi();
> +}
> +
> +extern long fw_dtb_pointer;

comment

> +
> +void *board_fdt_blob_setup(void)
> +{
> +       return (void *)fw_dtb_pointer;
> +}
> +
> +ulong board_get_usable_ram_top(ulong total_size)
> +{
> +       /*
> +        * Top part of RAM is used by firmware for things like the
> +        * framebuffer.  This gives us plenty of room to play with.
> +        */
> +       return 0x980000000;
> +}
> diff --git a/arch/arm/mach-apple/lowlevel_init.S b/arch/arm/mach-apple/lowlevel_init.S
> new file mode 100644
> index 0000000000..0f5313163e
> --- /dev/null
> +++ b/arch/arm/mach-apple/lowlevel_init.S
> @@ -0,0 +1,16 @@
> +/* SPDX-License-Identifier: GPL-2.0+ */
> +/*
> + * (C) Copyright 2021 Mark Kettenis <kettenis@openbsd.org>
> + */
> +
> +.align 8
> +.global fw_dtb_pointer
> +fw_dtb_pointer:
> +       .quad   0
> +
> +.global save_boot_params
> +save_boot_params:
> +       adr     x1, fw_dtb_pointer

could use a comment as to where this is set up. Previous-stage
firmware, I suppose?

> +       str     x0, [x1]
> +
> +       b       save_boot_params_ret
> diff --git a/configs/apple_m1_defconfig b/configs/apple_m1_defconfig
> new file mode 100644
> index 0000000000..a7ae15576b
> --- /dev/null
> +++ b/configs/apple_m1_defconfig
> @@ -0,0 +1,14 @@
> +CONFIG_ARM=y
> +CONFIG_ARCH_APPLE=y
> +# CONFIG_DISPLAY_CPUINFO is not set
> +# CONFIG_MMC is not set
> +# CONFIG_NET is not set
> +CONFIG_VIDEO_SIMPLE=y
> +CONFIG_DISPLAY_BOARDINFO_LATE=y
> +CONFIG_USB_XHCI_HCD=y
> +CONFIG_USB_XHCI_DWC3=y
> +CONFIG_USB_KEYBOARD=y
> +CONFIG_USB_STORAGE=y
> +CONFIG_USE_PREBOOT=y
> +CONFIG_PREBOOT="usb start"
> +# CONFIG_GENERATE_SMBIOS_TABLE is not set
> diff --git a/include/configs/apple.h b/include/configs/apple.h
> new file mode 100644
> index 0000000000..1c246af002
> --- /dev/null
> +++ b/include/configs/apple.h
> @@ -0,0 +1,38 @@
> +#ifndef __CONFIG_H
> +#define __CONFIG_H
> +
> +#include <linux/sizes.h>
> +
> +#define CONFIG_SYS_LOAD_ADDR   0x880000000
> +
> +#define CONFIG_SYS_SDRAM_BASE  0x880000000
> +
> +#define CONFIG_LNX_KRNL_IMG_TEXT_OFFSET_BASE   CONFIG_SYS_TEXT_BASE
> +
> +/* Environment */
> +#define ENV_DEVICE_SETTINGS \
> +       "stdin=serial,usbkbd\0" \
> +       "stdout=serial,vidconsole\0" \
> +       "stderr=serial,vidconsole\0"
> +
> +#define ENV_MEM_LAYOUT_SETTINGS \
> +       "fdt_addr_r=0x960100000\0" \
> +       "kernel_addr_r=0x960200000\0"
> +
> +#if CONFIG_IS_ENABLED(CMD_USB)
> +       #define BOOT_TARGET_USB(func) func(USB, usb, 0)
> +#else
> +       #define BOOT_TARGET_USB(func)
> +#endif
> +
> +#define BOOT_TARGET_DEVICES(func) \
> +       BOOT_TARGET_USB(func)
> +
> +#include <config_distro_bootcmd.h>
> +
> +#define CONFIG_EXTRA_ENV_SETTINGS \
> +       ENV_DEVICE_SETTINGS \
> +       ENV_MEM_LAYOUT_SETTINGS \
> +       BOOTENV
> +
> +#endif
> --
> 2.33.0
>

Regards,
Simon

^ permalink raw reply	[flat|nested] 46+ messages in thread

* Re: [PATCH 2/5] serial: s5p: Add Apple M1 support
  2021-09-18 13:54 ` [PATCH 2/5] serial: s5p: Add Apple M1 support Mark Kettenis
  2021-09-19  1:11   ` Bin Meng
@ 2021-09-20  3:15   ` Simon Glass
  2021-09-25 13:27     ` Simon Glass
  2021-10-02 22:15     ` Mark Kettenis
  1 sibling, 2 replies; 46+ messages in thread
From: Simon Glass @ 2021-09-20  3:15 UTC (permalink / raw)
  To: Mark Kettenis
  Cc: U-Boot Mailing List, Oliver Graute, Leo Yu-Chi Liang,
	Kishon Vijay Abraham I, Priyanka Jain, Stephan Gerhold,
	Padmarao Begari, Tianrui Wei, Michael Walle, Heinrich Schuchardt,
	Asherah Connor, Bin Meng, Michal Simek, Wasim Khan, Ye Li,
	Igor Opaniuk, Stefan Roese, AKASHI Takahiro, Vabhav Sharma,
	Weijie Gao, Pratyush Yadav, Andy Shevchenko

Hi Mark,

On Sat, 18 Sept 2021 at 07:55, Mark Kettenis <kettenis@openbsd.org> wrote:
>
> Apple M1 SoCs include an S5L UART which is a variant of the S5P
> UART.  Add support for this variant and enable it by default
> on Apple SoCs.
>
> Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
> ---
>  arch/arm/include/asm/arch-m1/clk.h  | 11 ++++++++
>  arch/arm/include/asm/arch-m1/uart.h | 41 +++++++++++++++++++++++++++++
>  arch/arm/mach-apple/board.c         |  5 ++++
>  drivers/serial/Kconfig              |  2 +-
>  drivers/serial/serial_s5p.c         | 22 ++++++++++++++++
>  5 files changed, 80 insertions(+), 1 deletion(-)
>  create mode 100644 arch/arm/include/asm/arch-m1/clk.h
>  create mode 100644 arch/arm/include/asm/arch-m1/uart.h
>
> diff --git a/arch/arm/include/asm/arch-m1/clk.h b/arch/arm/include/asm/arch-m1/clk.h
> new file mode 100644
> index 0000000000..f4326d0c0f
> --- /dev/null
> +++ b/arch/arm/include/asm/arch-m1/clk.h
> @@ -0,0 +1,11 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (C) 2021 Mark Kettenis <kettenis@openbsd.org>
> + */
> +
> +#ifndef __ASM_ARM_ARCH_CLK_H_
> +#define __ASM_ARM_ARCH_CLK_H_
> +
> +unsigned long get_uart_clk(int dev_index);

comment? But this should be in a clock driver, unless you are trying
to get a debug UART up ASAP with minimal code?

> +
> +#endif
> diff --git a/arch/arm/include/asm/arch-m1/uart.h b/arch/arm/include/asm/arch-m1/uart.h
> new file mode 100644
> index 0000000000..d2a17a221e
> --- /dev/null
> +++ b/arch/arm/include/asm/arch-m1/uart.h
> @@ -0,0 +1,41 @@
> +/* SPDX-License-Identifier: GPL-2.0+ */
> +/*
> + * (C) Copyright 2009 Samsung Electronics
> + * Minkyu Kang <mk7.kang@samsung.com>
> + * Heungjun Kim <riverful.kim@samsung.com>
> + */
> +
> +#ifndef __ASM_ARCH_UART_H_
> +#define __ASM_ARCH_UART_H_
> +
> +#ifndef __ASSEMBLY__
> +/* baudrate rest value */
> +union br_rest {
> +       unsigned short  slot;           /* udivslot */
> +       unsigned char   value;          /* ufracval */
> +};
> +
> +struct s5p_uart {
> +       unsigned int    ulcon;
> +       unsigned int    ucon;
> +       unsigned int    ufcon;
> +       unsigned int    umcon;
> +       unsigned int    utrstat;
> +       unsigned int    uerstat;
> +       unsigned int    ufstat;
> +       unsigned int    umstat;
> +       unsigned int    utxh;
> +       unsigned int    urxh;
> +       unsigned int    ubrdiv;
> +       union br_rest   rest;
> +       unsigned char   res3[0x3fd0];
> +};
> +
> +static inline int s5p_uart_divslot(void)
> +{
> +       return 0;
> +}
> +
> +#endif /* __ASSEMBLY__ */
> +
> +#endif
> diff --git a/arch/arm/mach-apple/board.c b/arch/arm/mach-apple/board.c
> index 0c8b35292e..8bc5c2f69e 100644
> --- a/arch/arm/mach-apple/board.c
> +++ b/arch/arm/mach-apple/board.c
> @@ -156,3 +156,8 @@ ulong board_get_usable_ram_top(ulong total_size)
>          */
>         return 0x980000000;
>  }
> +
> +unsigned long get_uart_clk(int dev_index)
> +{
> +       return 24000000;

Should add to devicetree for the driver

> +}
> diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
> index 93348c0929..c3ac773929 100644
> --- a/drivers/serial/Kconfig
> +++ b/drivers/serial/Kconfig
> @@ -719,7 +719,7 @@ config ROCKCHIP_SERIAL
>
>  config S5P_SERIAL
>         bool "Support for Samsung S5P UART"
> -       depends on ARCH_EXYNOS || ARCH_S5PC1XX
> +       depends on ARCH_APPLE || ARCH_EXYNOS || ARCH_S5PC1XX
>         default y
>         help
>           Select this to enable Samsung S5P UART support.
> diff --git a/drivers/serial/serial_s5p.c b/drivers/serial/serial_s5p.c
> index 6d09952a5d..eb770d9b62 100644
> --- a/drivers/serial/serial_s5p.c
> +++ b/drivers/serial/serial_s5p.c
> @@ -21,12 +21,21 @@
>
>  DECLARE_GLOBAL_DATA_PTR;
>
> +#ifdef CONFIG_ARCH_APPLE

This should use the compatible string to decide which variant it is,
then the checks happen at runtime. We should never have arch-specific
#ifdefs in drivers.

> +#define RX_FIFO_COUNT_SHIFT    0
> +#define RX_FIFO_COUNT_MASK     (0xf << RX_FIFO_COUNT_SHIFT)
> +#define RX_FIFO_FULL           (1 << 8)
> +#define TX_FIFO_COUNT_SHIFT    4
> +#define TX_FIFO_COUNT_MASK     (0xf << TX_FIFO_COUNT_SHIFT)
> +#define TX_FIFO_FULL           (1 << 9)
> +#else
>  #define RX_FIFO_COUNT_SHIFT    0
>  #define RX_FIFO_COUNT_MASK     (0xff << RX_FIFO_COUNT_SHIFT)
>  #define RX_FIFO_FULL           (1 << 8)
>  #define TX_FIFO_COUNT_SHIFT    16
>  #define TX_FIFO_COUNT_MASK     (0xff << TX_FIFO_COUNT_SHIFT)
>  #define TX_FIFO_FULL           (1 << 24)
> +#endif
>
>  /* Information about a serial port */
>  struct s5p_serial_plat {
> @@ -83,7 +92,11 @@ static void __maybe_unused s5p_serial_baud(struct s5p_uart *uart, uint uclk,
>         if (s5p_uart_divslot())
>                 writew(udivslot[val % 16], &uart->rest.slot);
>         else
> +#ifdef CONFIG_ARCH_APPLE
> +               writel(val % 16, &uart->rest.value);
> +#else
>                 writeb(val % 16, &uart->rest.value);
> +#endif
>  }
>
>  #ifndef CONFIG_SPL_BUILD
> @@ -148,7 +161,11 @@ static int s5p_serial_getc(struct udevice *dev)
>                 return -EAGAIN;
>
>         serial_err_check(uart, 0);
> +#ifdef CONFIG_ARCH_APPLE
> +       return (int)(readl(&uart->urxh) & 0xff);
> +#else
>         return (int)(readb(&uart->urxh) & 0xff);
> +#endif
>  }
>
>  static int s5p_serial_putc(struct udevice *dev, const char ch)
> @@ -159,7 +176,11 @@ static int s5p_serial_putc(struct udevice *dev, const char ch)
>         if (readl(&uart->ufstat) & TX_FIFO_FULL)
>                 return -EAGAIN;
>
> +#ifdef CONFIG_ARCH_APPLE
> +       writel(ch, &uart->utxh);
> +#else
>         writeb(ch, &uart->utxh);
> +#endif
>         serial_err_check(uart, 1);
>
>         return 0;
> @@ -201,6 +222,7 @@ static const struct dm_serial_ops s5p_serial_ops = {
>
>  static const struct udevice_id s5p_serial_ids[] = {
>         { .compatible = "samsung,exynos4210-uart" },
> +       { .compatible = "apple,s5l-uart" },
>         { }
>  };
>
> --
> 2.33.0
>

Can you add debug UART support? Or does this already work?

Regards,
Simon

^ permalink raw reply	[flat|nested] 46+ messages in thread

* Re: [PATCH 3/5] misc: Add Apple DART driver
  2021-09-18 13:54 ` [PATCH 3/5] misc: Add Apple DART driver Mark Kettenis
@ 2021-09-20  3:16   ` Simon Glass
  2021-09-20  8:33     ` Mark Kettenis
  0 siblings, 1 reply; 46+ messages in thread
From: Simon Glass @ 2021-09-20  3:16 UTC (permalink / raw)
  To: Mark Kettenis
  Cc: U-Boot Mailing List, Oliver Graute, Stephan Gerhold,
	Masami Hiramatsu, Priyanka Jain, Leo Yu-Chi Liang,
	Padmarao Begari, Michael Walle, Kishon Vijay Abraham I,
	Heinrich Schuchardt, Bin Meng, Asherah Connor, Michal Simek,
	Wasim Khan, Heiko Schocher, Igor Opaniuk, Ye Li, Stefan Roese,
	AKASHI Takahiro, Weijie Gao, Vabhav Sharma, Andy Shevchenko,
	Pratyush Yadav

Hi Mark,

On Sat, 18 Sept 2021 at 07:55, Mark Kettenis <kettenis@openbsd.org> wrote:
>
> The DART is an IOMMU that is used on Apple's M1 SoC.  This driver
> supports the DART in bypass mode as well as in a mode where it
> creates a 1:1 mapping of a subset of RAM as not all DARTs support
> bypass mode.  The USB3 ports integrated on the SoC use a DART
> that supports bypass mode.  The 1:1 mapping will be used in the
> future to support other devices such as the PCIe host bridge
> of the M1 SoC.
>
> Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
> ---
>  drivers/misc/Kconfig      |   7 ++
>  drivers/misc/Makefile     |   1 +
>  drivers/misc/apple_dart.c | 171 ++++++++++++++++++++++++++++++++++++++
>  3 files changed, 179 insertions(+)
>  create mode 100644 drivers/misc/apple_dart.c
>
> diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
> index 997b713221..d70b060e74 100644
> --- a/drivers/misc/Kconfig
> +++ b/drivers/misc/Kconfig
> @@ -38,6 +38,13 @@ config ALTERA_SYSID
>           Select this to enable a sysid for Altera devices. Please find
>           details on the "Embedded Peripherals IP User Guide" of Altera.
>
> +config APPLE_DART
> +       bool "Apple DART support"
> +       depends on MISC && ARCH_APPLE
> +       default y
> +       help
> +         Enable support for the DART on Apple SoCs.

Should have at least 3 lines. E.g. what does DART stand for, what does
it do and what does the driver support?

> +
>  config ATSHA204A
>         bool "Support for Atmel ATSHA204A module"
>         depends on MISC
> diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
> index b64cd2a4de..f666cd392d 100644
> --- a/drivers/misc/Makefile
> +++ b/drivers/misc/Makefile
> @@ -29,6 +29,7 @@ endif
>  endif
>  obj-$(CONFIG_ALI152X) += ali512x.o
>  obj-$(CONFIG_ALTERA_SYSID) += altera_sysid.o
> +obj-$(CONFIG_APPLE_DART) += apple_dart.o
>  obj-$(CONFIG_ATSHA204A) += atsha204a-i2c.o
>  obj-$(CONFIG_CBMEM_CONSOLE) += cbmem_console.o
>  obj-$(CONFIG_DS4510)  += ds4510.o
> diff --git a/drivers/misc/apple_dart.c b/drivers/misc/apple_dart.c
> new file mode 100644
> index 0000000000..f619a624d0
> --- /dev/null
> +++ b/drivers/misc/apple_dart.c
> @@ -0,0 +1,171 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (C) 2021 Mark Kettenis <kettenis@openbsd.org>
> + */
> +
> +#include <common.h>
> +#include <clk.h>
> +#include <cpu_func.h>
> +#include <dm.h>
> +#include <mapmem.h>
> +#include <asm/io.h>
> +
> +#define DART_PARAMS2           0x0004
> +#define  DART_PARAMS2_BYPASS_SUPPORT   BIT(0)
> +#define DART_TLB_OP            0x0020
> +#define  DART_TLB_OP_OPMASK    (0xfff << 20)
> +#define  DART_TLB_OP_FLUSH     (0x001 << 20)
> +#define  DART_TLB_OP_BUSY      BIT(2)
> +#define DART_TLB_OP_SIDMASK    0x0034
> +#define DART_ERROR_STATUS      0x0040
> +#define DART_TCR(sid)          (0x0100 + 4 * (sid))
> +#define  DART_TCR_TRANSLATE_ENABLE     BIT(7)
> +#define  DART_TCR_BYPASS_DART          BIT(8)
> +#define  DART_TCR_BYPASS_DAPF          BIT(12)
> +#define DART_TTBR(sid, idx)    (0x0200 + 16 * (sid) + 4 * (idx))
> +#define  DART_TTBR_VALID       BIT(31)
> +#define  DART_TTBR_SHIFT       12
> +
> +struct apple_dart_priv {

How about s/apple_dart/dart/ ?

It makes the code easier to read.

> +       struct clk_bulk clks;
> +       void *base;
> +};
> +
> +dma_addr_t apple_dart_bus_start;
> +phys_addr_t apple_dart_phys_start;
> +phys_size_t apple_dart_size = SZ_512M;

Try to avoid variables in drivers. Can these go in a priv struct?

> +
> +static void apple_dart_flush_tlb(struct apple_dart_priv *priv)

comments on these functions

> +{
> +       u32 status;
> +
> +       writel(0xffffffff, priv->base + DART_TLB_OP_SIDMASK);
> +       writel(DART_TLB_OP_FLUSH, priv->base + DART_TLB_OP);
> +
> +       for (;;) {
> +               status = readl(priv->base + DART_TLB_OP);
> +               if ((status & DART_TLB_OP_OPMASK) == 0)
> +                       break;
> +               if ((status & DART_TLB_OP_BUSY) == 0)
> +                       break;
> +       }
> +}
> +
> +static int apple_dart_clk_init(struct udevice *dev,
> +                              struct apple_dart_priv *priv)
> +{
> +       int ret;
> +
> +       ret = clk_get_bulk(dev, &priv->clks);
> +       if (ret == -ENOSYS || ret == -ENOENT)

Does -ENOSYS not indicate an error? If it doesn't, I think a comment
would help here.

> +               return 0;
> +       if (ret)
> +               return ret;
> +
> +       ret = clk_enable_bulk(&priv->clks);
> +       if (ret) {
> +               clk_release_bulk(&priv->clks);
> +               return ret;
> +       }
> +
> +       return 0;
> +}
> +
> +static int apple_dart_bind(struct udevice *dev)
> +{
> +       void *base;
> +       int sid, i;
> +
> +       base = dev_read_addr_ptr(dev);
> +       if (!base)
> +               return -EINVAL;
> +
> +       u32 params2 = readl(base + DART_PARAMS2);
> +       if (params2 & DART_PARAMS2_BYPASS_SUPPORT) {
> +               for (sid = 0; sid < 16; sid++) {
> +                       writel(DART_TCR_BYPASS_DART | DART_TCR_BYPASS_DAPF,
> +                              base + DART_TCR(sid));
> +                       for (i = 0; i < 4; i++)
> +                               writel(0, base + DART_TTBR(sid, i));
> +               }
> +       }

Not allowed hardware access in bind(). Can this more to probe() ?

> +
> +       return 0;
> +}
> +
> +static int apple_dart_probe(struct udevice *dev)
> +{
> +       struct apple_dart_priv *priv = dev_get_priv(dev);
> +       phys_addr_t phys;
> +       u64 *l1, *l2;
> +       int sid, i, j;
> +       int ret;
> +
> +       apple_dart_phys_start = gd->ram_top - apple_dart_size;
> +
> +       priv->base = dev_read_addr_ptr(dev);
> +       if (!priv->base)
> +               return -EINVAL;
> +
> +       ret = apple_dart_clk_init(dev, priv);
> +       if (ret)
> +               return ret;
> +
> +       l1 = memalign(SZ_64K, SZ_64K);
> +       memset(l1, 0, SZ_64K);
> +
> +       i = 0;
> +       phys = apple_dart_phys_start;
> +       while (phys < apple_dart_phys_start + apple_dart_size) {
> +               l2 = memalign(SZ_16K, SZ_16K);

check for error

> +               memset(l2, 0, SZ_16K);
> +
> +               for (j = 0; j < 2048; j++) {
> +                       l2[j] = phys | 0x3;
> +                       phys += SZ_16K;
> +               }
> +               flush_dcache_range((unsigned long)l2,
> +                                  (unsigned long)l2 + SZ_16K);
> +
> +               l1[i++] = (phys_addr_t)l2 | 0x8 | 0x3;

Do you need the cast? What are the magic numbers here? Can you use an
enum/#define ?

> +       }
> +
> +       flush_dcache_range((unsigned long)l1, (unsigned long)l1 + SZ_64K);
> +
> +       for (sid = 0; sid < 16; sid++) {

comment,...what is this doing?

> +               for (i = 0; i < 4; i++)
> +                       writel(0, priv->base + DART_TTBR(sid, i));
> +       }
> +
> +       apple_dart_flush_tlb(priv);
> +
> +       for (sid = 0; sid < 16; sid++) {
> +               phys = (phys_addr_t)l1;
> +               for (i = 0; i < 4; i++) {
> +                       writel((phys >> DART_TTBR_SHIFT) | DART_TTBR_VALID,
> +                              priv->base + DART_TTBR(sid, i));
> +                       phys += SZ_16K;
> +               }
> +       }
> +
> +       apple_dart_flush_tlb(priv);
> +
> +       for (sid = 0; sid < 16; sid++)
> +               writel(DART_TCR_TRANSLATE_ENABLE, priv->base + DART_TCR(sid));
> +
> +       return 0;
> +}
> +
> +static const struct udevice_id apple_dart_ids[] = {
> +       { .compatible = "apple,t8103-dart" },
> +       { /* sentinel */ }
> +};
> +
> +U_BOOT_DRIVER(apple_dart) = {
> +       .name = "apple_dart",
> +       .id = UCLASS_MISC,
> +       .of_match = apple_dart_ids,
> +       .priv_auto = sizeof(struct apple_dart_priv),
> +       .bind = apple_dart_bind,
> +       .probe = apple_dart_probe
> +};
> --
> 2.33.0
>

Regards,
Simon

^ permalink raw reply	[flat|nested] 46+ messages in thread

* Re: [PATCH 4/5] arm: dts: apple: Add preliminary device trees
  2021-09-18 13:54 ` [PATCH 4/5] arm: dts: apple: Add preliminary device trees Mark Kettenis
@ 2021-09-20  3:16   ` Simon Glass
  2021-09-25 13:27     ` Simon Glass
  0 siblings, 1 reply; 46+ messages in thread
From: Simon Glass @ 2021-09-20  3:16 UTC (permalink / raw)
  To: Mark Kettenis
  Cc: U-Boot Mailing List, Oliver Graute, Leo Yu-Chi Liang, Anup Patel,
	Bin Meng, Kishon Vijay Abraham I, Stephan Gerhold, Tianrui Wei,
	Heinrich Schuchardt, Asherah Connor, Michal Simek, Wasim Khan,
	Igor Opaniuk, Ye Li, Stefan Roese, Vabhav Sharma,
	Marek Behún, Weijie Gao, AKASHI Takahiro, Andy Shevchenko,
	Pratyush Yadav

On Sat, 18 Sept 2021 at 07:56, Mark Kettenis <kettenis@openbsd.org> wrote:
>
> Add preliminary device trees for the Apple M1 mini (2020) and
> Apple M1 Macbook Pro 13" (2020).  Device tree bindings for
> the Apple M1 SoC are still being formalized and these device
> trees will be synchronized with the Linux kernel as needed.
>
> These device trees are provided as a reference only as U-Boot
> uses the device tree passed by the m1n1 bootloader.
>
> Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
> ---
>  arch/arm/dts/t8103-j274.dts                   | 135 +++++
>  arch/arm/dts/t8103-j293.dts                   |  97 ++++
>  arch/arm/dts/t8103.dtsi                       | 506 ++++++++++++++++++
>  .../interrupt-controller/apple-aic.h          |  15 +
>  include/dt-bindings/pinctrl/apple.h           |  13 +
>  include/dt-bindings/spmi/spmi.h               |  10 +
>  6 files changed, 776 insertions(+)
>  create mode 100644 arch/arm/dts/t8103-j274.dts
>  create mode 100644 arch/arm/dts/t8103-j293.dts
>  create mode 100644 arch/arm/dts/t8103.dtsi
>  create mode 100644 include/dt-bindings/interrupt-controller/apple-aic.h
>  create mode 100644 include/dt-bindings/pinctrl/apple.h
>  create mode 100644 include/dt-bindings/spmi/spmi.h

Reviewed-by: Simon Glass <sjg@chromium.org>

^ permalink raw reply	[flat|nested] 46+ messages in thread

* Re: [PATCH 5/5] doc: board: apple: Add Apple M1 documentation
  2021-09-18 13:54 ` [PATCH 5/5] doc: board: apple: Add Apple M1 documentation Mark Kettenis
  2021-09-19  1:22   ` Bin Meng
@ 2021-09-20  3:16   ` Simon Glass
  2021-09-25 13:27     ` Simon Glass
  2021-09-20  8:45   ` Igor Opaniuk
  2 siblings, 1 reply; 46+ messages in thread
From: Simon Glass @ 2021-09-20  3:16 UTC (permalink / raw)
  To: Mark Kettenis
  Cc: U-Boot Mailing List, Oliver Graute, Leo Yu-Chi Liang,
	Jonathan Balkind, Bin Meng, Michael Walle, Stephan Gerhold,
	Padmarao Begari, Tianrui Wei, Masami Hiramatsu,
	Heinrich Schuchardt, Asherah Connor, Michal Simek, Wasim Khan,
	Igor Opaniuk, Ye Li, Stefan Roese, Marek Behún,
	Vabhav Sharma, Weijie Gao, AKASHI Takahiro, Pratyush Yadav,
	Andy Shevchenko

On Sat, 18 Sept 2021 at 07:56, Mark Kettenis <kettenis@openbsd.org> wrote:
>
> Provide preliminary instructions on how to get U-Boot to run on
> Apple Silicon Macs.
>
> Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
> ---
>  doc/board/apple/index.rst |  9 +++++++
>  doc/board/apple/m1.rst    | 56 +++++++++++++++++++++++++++++++++++++++
>  doc/board/index.rst       |  1 +
>  3 files changed, 66 insertions(+)
>  create mode 100644 doc/board/apple/index.rst
>  create mode 100644 doc/board/apple/m1.rst

Reviewed-by: Simon Glass <sjg@chromium.org>

^ permalink raw reply	[flat|nested] 46+ messages in thread

* Re: [PATCH 3/5] misc: Add Apple DART driver
  2021-09-20  3:16   ` Simon Glass
@ 2021-09-20  8:33     ` Mark Kettenis
  2021-09-21  1:11       ` Simon Glass
  0 siblings, 1 reply; 46+ messages in thread
From: Mark Kettenis @ 2021-09-20  8:33 UTC (permalink / raw)
  To: Simon Glass
  Cc: kettenis, u-boot, oliver.graute, stephan, masami.hiramatsu,
	priyanka.jain, ycliang, padmarao.begari, michael, kishon,
	xypron.glpk, bin.meng, ashe, michal.simek, wasim.khan, hs,
	igor.opaniuk, ye.li, sr, takahiro.akashi, weijie.gao,
	vabhav.sharma, andriy.shevchenko, p.yadav

> From: Simon Glass <sjg@chromium.org>
> Date: Sun, 19 Sep 2021 21:16:00 -0600
> 
> Hi Mark,
> 
> On Sat, 18 Sept 2021 at 07:55, Mark Kettenis <kettenis@openbsd.org> wrote:
> >
> > The DART is an IOMMU that is used on Apple's M1 SoC.  This driver
> > supports the DART in bypass mode as well as in a mode where it
> > creates a 1:1 mapping of a subset of RAM as not all DARTs support
> > bypass mode.  The USB3 ports integrated on the SoC use a DART
> > that supports bypass mode.  The 1:1 mapping will be used in the
> > future to support other devices such as the PCIe host bridge
> > of the M1 SoC.
> >
> > Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
> > ---
> >  drivers/misc/Kconfig      |   7 ++
> >  drivers/misc/Makefile     |   1 +
> >  drivers/misc/apple_dart.c | 171 ++++++++++++++++++++++++++++++++++++++
> >  3 files changed, 179 insertions(+)
> >  create mode 100644 drivers/misc/apple_dart.c
> >
> > diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
> > index 997b713221..d70b060e74 100644
> > --- a/drivers/misc/Kconfig
> > +++ b/drivers/misc/Kconfig
> > @@ -38,6 +38,13 @@ config ALTERA_SYSID
> >           Select this to enable a sysid for Altera devices. Please find
> >           details on the "Embedded Peripherals IP User Guide" of Altera.
> >
> > +config APPLE_DART
> > +       bool "Apple DART support"
> > +       depends on MISC && ARCH_APPLE
> > +       default y
> > +       help
> > +         Enable support for the DART on Apple SoCs.
> 
> Should have at least 3 lines. E.g. what does DART stand for, what does
> it do and what does the driver support?

Sure.  The DART is what we usually call an IOMMU.

> > +
> >  config ATSHA204A
> >         bool "Support for Atmel ATSHA204A module"
> >         depends on MISC
> > diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
> > index b64cd2a4de..f666cd392d 100644
> > --- a/drivers/misc/Makefile
> > +++ b/drivers/misc/Makefile
> > @@ -29,6 +29,7 @@ endif
> >  endif
> >  obj-$(CONFIG_ALI152X) += ali512x.o
> >  obj-$(CONFIG_ALTERA_SYSID) += altera_sysid.o
> > +obj-$(CONFIG_APPLE_DART) += apple_dart.o
> >  obj-$(CONFIG_ATSHA204A) += atsha204a-i2c.o
> >  obj-$(CONFIG_CBMEM_CONSOLE) += cbmem_console.o
> >  obj-$(CONFIG_DS4510)  += ds4510.o
> > diff --git a/drivers/misc/apple_dart.c b/drivers/misc/apple_dart.c
> > new file mode 100644
> > index 0000000000..f619a624d0
> > --- /dev/null
> > +++ b/drivers/misc/apple_dart.c
> > @@ -0,0 +1,171 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/*
> > + * Copyright (C) 2021 Mark Kettenis <kettenis@openbsd.org>
> > + */
> > +
> > +#include <common.h>
> > +#include <clk.h>
> > +#include <cpu_func.h>
> > +#include <dm.h>
> > +#include <mapmem.h>
> > +#include <asm/io.h>
> > +
> > +#define DART_PARAMS2           0x0004
> > +#define  DART_PARAMS2_BYPASS_SUPPORT   BIT(0)
> > +#define DART_TLB_OP            0x0020
> > +#define  DART_TLB_OP_OPMASK    (0xfff << 20)
> > +#define  DART_TLB_OP_FLUSH     (0x001 << 20)
> > +#define  DART_TLB_OP_BUSY      BIT(2)
> > +#define DART_TLB_OP_SIDMASK    0x0034
> > +#define DART_ERROR_STATUS      0x0040
> > +#define DART_TCR(sid)          (0x0100 + 4 * (sid))
> > +#define  DART_TCR_TRANSLATE_ENABLE     BIT(7)
> > +#define  DART_TCR_BYPASS_DART          BIT(8)
> > +#define  DART_TCR_BYPASS_DAPF          BIT(12)
> > +#define DART_TTBR(sid, idx)    (0x0200 + 16 * (sid) + 4 * (idx))
> > +#define  DART_TTBR_VALID       BIT(31)
> > +#define  DART_TTBR_SHIFT       12
> > +
> > +struct apple_dart_priv {
> 
> How about s/apple_dart/dart/ ?
> 
> It makes the code easier to read.

I think using apple_dart_ consistently as a prefix makes more sense.

> > +       struct clk_bulk clks;
> > +       void *base;
> > +};
> > +
> > +dma_addr_t apple_dart_bus_start;
> > +phys_addr_t apple_dart_phys_start;
> > +phys_size_t apple_dart_size = SZ_512M;
> 
> Try to avoid variables in drivers. Can these go in a priv struct?

Not really since the intent is that these variables specify a global
"window" that is mapped 1:1 into all the DARTs.

> > +
> > +static void apple_dart_flush_tlb(struct apple_dart_priv *priv)
> 
> comments on these functions
> 
> > +{
> > +       u32 status;
> > +
> > +       writel(0xffffffff, priv->base + DART_TLB_OP_SIDMASK);
> > +       writel(DART_TLB_OP_FLUSH, priv->base + DART_TLB_OP);
> > +
> > +       for (;;) {
> > +               status = readl(priv->base + DART_TLB_OP);
> > +               if ((status & DART_TLB_OP_OPMASK) == 0)
> > +                       break;
> > +               if ((status & DART_TLB_OP_BUSY) == 0)
> > +                       break;
> > +       }
> > +}
> > +
> > +static int apple_dart_clk_init(struct udevice *dev,
> > +                              struct apple_dart_priv *priv)
> > +{
> > +       int ret;
> > +
> > +       ret = clk_get_bulk(dev, &priv->clks);
> > +       if (ret == -ENOSYS || ret == -ENOENT)
> 
> Does -ENOSYS not indicate an error? If it doesn't, I think a comment
> would help here.

So we just learned that what we previously considered to be clocks are
really better modelled as power domains.  So this code will go away.

> > +               return 0;
> > +       if (ret)
> > +               return ret;
> > +
> > +       ret = clk_enable_bulk(&priv->clks);
> > +       if (ret) {
> > +               clk_release_bulk(&priv->clks);
> > +               return ret;
> > +       }
> > +
> > +       return 0;
> > +}
> > +
> > +static int apple_dart_bind(struct udevice *dev)
> > +{
> > +       void *base;
> > +       int sid, i;
> > +
> > +       base = dev_read_addr_ptr(dev);
> > +       if (!base)
> > +               return -EINVAL;
> > +
> > +       u32 params2 = readl(base + DART_PARAMS2);
> > +       if (params2 & DART_PARAMS2_BYPASS_SUPPORT) {
> > +               for (sid = 0; sid < 16; sid++) {
> > +                       writel(DART_TCR_BYPASS_DART | DART_TCR_BYPASS_DAPF,
> > +                              base + DART_TCR(sid));
> > +                       for (i = 0; i < 4; i++)
> > +                               writel(0, base + DART_TTBR(sid, i));
> > +               }
> > +       }
> 
> Not allowed hardware access in bind(). Can this more to probe() ?

Well, I need to make sure that this happens before other drivers get
probed (in particular the xhci-dwc3 driver).  Is there a better
mechanism to achieve that?

> > +
> > +       return 0;
> > +}
> > +
> > +static int apple_dart_probe(struct udevice *dev)
> > +{
> > +       struct apple_dart_priv *priv = dev_get_priv(dev);
> > +       phys_addr_t phys;
> > +       u64 *l1, *l2;
> > +       int sid, i, j;
> > +       int ret;
> > +
> > +       apple_dart_phys_start = gd->ram_top - apple_dart_size;
> > +
> > +       priv->base = dev_read_addr_ptr(dev);
> > +       if (!priv->base)
> > +               return -EINVAL;
> > +
> > +       ret = apple_dart_clk_init(dev, priv);
> > +       if (ret)
> > +               return ret;
> > +
> > +       l1 = memalign(SZ_64K, SZ_64K);
> > +       memset(l1, 0, SZ_64K);
> > +
> > +       i = 0;
> > +       phys = apple_dart_phys_start;
> > +       while (phys < apple_dart_phys_start + apple_dart_size) {
> > +               l2 = memalign(SZ_16K, SZ_16K);
> 
> check for error
> 
> > +               memset(l2, 0, SZ_16K);
> > +
> > +               for (j = 0; j < 2048; j++) {
> > +                       l2[j] = phys | 0x3;
> > +                       phys += SZ_16K;
> > +               }
> > +               flush_dcache_range((unsigned long)l2,
> > +                                  (unsigned long)l2 + SZ_16K);
> > +
> > +               l1[i++] = (phys_addr_t)l2 | 0x8 | 0x3;
> 
> Do you need the cast? What are the magic numbers here? Can you use an
> enum/#define ?

Not sure if we know the exact meaning of those bits yet.  But there is
a Linux driver now, so maybe I need to look at it again.

> > +       }
> > +
> > +       flush_dcache_range((unsigned long)l1, (unsigned long)l1 + SZ_64K);
> > +
> > +       for (sid = 0; sid < 16; sid++) {
> 
> comment,...what is this doing?
> 
> > +               for (i = 0; i < 4; i++)
> > +                       writel(0, priv->base + DART_TTBR(sid, i));
> > +       }
> > +
> > +       apple_dart_flush_tlb(priv);
> > +
> > +       for (sid = 0; sid < 16; sid++) {
> > +               phys = (phys_addr_t)l1;
> > +               for (i = 0; i < 4; i++) {
> > +                       writel((phys >> DART_TTBR_SHIFT) | DART_TTBR_VALID,
> > +                              priv->base + DART_TTBR(sid, i));
> > +                       phys += SZ_16K;
> > +               }
> > +       }
> > +
> > +       apple_dart_flush_tlb(priv);
> > +
> > +       for (sid = 0; sid < 16; sid++)
> > +               writel(DART_TCR_TRANSLATE_ENABLE, priv->base + DART_TCR(sid));
> > +
> > +       return 0;
> > +}
> > +
> > +static const struct udevice_id apple_dart_ids[] = {
> > +       { .compatible = "apple,t8103-dart" },
> > +       { /* sentinel */ }
> > +};
> > +
> > +U_BOOT_DRIVER(apple_dart) = {
> > +       .name = "apple_dart",
> > +       .id = UCLASS_MISC,
> > +       .of_match = apple_dart_ids,
> > +       .priv_auto = sizeof(struct apple_dart_priv),
> > +       .bind = apple_dart_bind,
> > +       .probe = apple_dart_probe
> > +};
> > --
> > 2.33.0
> >
> 
> Regards,
> Simon
> 

^ permalink raw reply	[flat|nested] 46+ messages in thread

* Re: [PATCH 5/5] doc: board: apple: Add Apple M1 documentation
  2021-09-18 13:54 ` [PATCH 5/5] doc: board: apple: Add Apple M1 documentation Mark Kettenis
  2021-09-19  1:22   ` Bin Meng
  2021-09-20  3:16   ` Simon Glass
@ 2021-09-20  8:45   ` Igor Opaniuk
  2 siblings, 0 replies; 46+ messages in thread
From: Igor Opaniuk @ 2021-09-20  8:45 UTC (permalink / raw)
  To: Mark Kettenis
  Cc: U-Boot Mailing List, Oliver Graute, Leo Yu-Chi Liang,
	Jonathan Balkind, Bin Meng, Michael Walle, Stephan Gerhold,
	Padmarao Begari, Tianrui Wei, Masami Hiramatsu,
	Heinrich Schuchardt, Simon Glass, Asherah Connor, Michal Simek,
	Wasim Khan, Ye Li, Stefan Roese, Marek Behún, Vabhav Sharma,
	Weijie Gao, AKASHI Takahiro, Pratyush Yadav, Andy Shevchenko

On Sat, Sep 18, 2021 at 4:56 PM Mark Kettenis <kettenis@openbsd.org> wrote:
>
> Provide preliminary instructions on how to get U-Boot to run on
> Apple Silicon Macs.
>
> Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
> ---
>  doc/board/apple/index.rst |  9 +++++++
>  doc/board/apple/m1.rst    | 56 +++++++++++++++++++++++++++++++++++++++
>  doc/board/index.rst       |  1 +
>  3 files changed, 66 insertions(+)
>  create mode 100644 doc/board/apple/index.rst
>  create mode 100644 doc/board/apple/m1.rst
>
> diff --git a/doc/board/apple/index.rst b/doc/board/apple/index.rst
> new file mode 100644
> index 0000000000..8446847818
> --- /dev/null
> +++ b/doc/board/apple/index.rst
> @@ -0,0 +1,9 @@
> +.. SPDX-License-Identifier: GPL-2.0+
> +
> +Apple
> +=====
> +
> +.. toctree::
> +   :maxdepth: 2
> +
> +   m1
> diff --git a/doc/board/apple/m1.rst b/doc/board/apple/m1.rst
> new file mode 100644
> index 0000000000..2f2d940a4c
> --- /dev/null
> +++ b/doc/board/apple/m1.rst
> @@ -0,0 +1,56 @@
> +.. SPDX-License-Identifier: GPL-2.0+
> +
> +U-Boot for Apple Silicon Macs
> +=============================
> +
> +Allows Apple Silicon Macs to boot U-Boot via the m1n1 bootloader
> +developed by the Asahi Linux project.  At this point the machines with
> +the following SoCs work:
> +
> + - Apple M1 SoC
> +
> +On these SoCs the following hardware is supported:
> +
> + - S5L serial port
> + - Framebuffer
> + - USB 3.1 Type-C ports
> +
> +Device trees are currently provided for the M1 Mac mini (2020, J274)
> +and M1 MacBook Pro 13" (2020, J293).  The M1 MacBook Air (2020) is
> +expected to work with the J293 device tree.  The M1 iMac (2021) may
> +work with the J274 device tree.
> +
> +Building U-Boot
> +---------------
> +
> +.. code-block:: bash
> +
> +    $ export CROSS_COMPILE=aarch64-none-elf-
> +    $ make apple_m1_defconfig
> +    $ make
> +
> +This will build ``u-boot-nodtb.bin`` as well as devices trees for some
> +of the supported machines.  These device trees can be found in the
> +``arch/arm/dts`` subdirectory of your build.
> +
> +Image creation
> +--------------
> +
> +In order to run U-Boot on an Apple Silicon Mac, U-Boot has to be used
> +as a payload for the m1n1 bootloader.  Instructions for building m1n1
> +can be found here:
> +
> +    https://github.com/AsahiLinux/docs/wiki/SW%3Am1n1
> +
> +.. code-block:: bash
> +
> +    $ cat m1n1.macho t8103-j274.dtb u-boot-nodtb.bin > u-boot.macho
> +
> +Image installation
> +------------------
> +
> +Instructions on how to install U-Boot on your Mac can be found at:
> +
> +    https://github.com/AsahiLinux/docs/wiki/Developer-Quickstart
> +
> +Just replace ``m1n1.macho`` with ``u-boot.macho`` in the instructions.
> diff --git a/doc/board/index.rst b/doc/board/index.rst
> index 33087074fa..0add55b5d3 100644
> --- a/doc/board/index.rst
> +++ b/doc/board/index.rst
> @@ -10,6 +10,7 @@ Board-specific doc
>     advantech/index
>     AndesTech/index
>     amlogic/index
> +   apple/index
>     atmel/index
>     congatec/index
>     coreboot/index
> --
> 2.33.0
>

Reviewed-by: Igor Opaniuk <igor.opaniuk@gmail.com>

-- 
Best regards - Freundliche Grüsse - Meilleures salutations

Igor Opaniuk

mailto: igor.opaniuk@gmail.com
skype: igor.opanyuk
+380 (93) 836 40 67
http://ua.linkedin.com/in/iopaniuk

^ permalink raw reply	[flat|nested] 46+ messages in thread

* Re: [PATCH 1/5] arm: apple: Add initial support for Apple's M1 SoC
  2021-09-20  3:15   ` Simon Glass
@ 2021-09-20  8:49     ` Mark Kettenis
  2021-09-21  1:11       ` Simon Glass
  0 siblings, 1 reply; 46+ messages in thread
From: Mark Kettenis @ 2021-09-20  8:49 UTC (permalink / raw)
  To: Simon Glass
  Cc: kettenis, u-boot, bharat.gooty, rayagonda.kokatanur,
	oliver.graute, bin.meng, ycliang, tianrui-wei, stephan,
	padmarao.begari, kishon, xypron.glpk, michael, masami.hiramatsu,
	ashe, wasim.khan, michal.simek, igor.opaniuk, hs, ye.li, sr,
	vabhav.sharma, marek.behun, weijie.gao, takahiro.akashi,
	andriy.shevchenko, p.yadav

> From: Simon Glass <sjg@chromium.org>
> Date: Sun, 19 Sep 2021 21:15:57 -0600
> 
> Hi Mark,
> 
> On Sat, 18 Sept 2021 at 07:55, Mark Kettenis <kettenis@openbsd.org> wrote:
> >
> > Add support for Apple's M1 SoC that is used in "Apple Silicon"
> > Macs.  This builds a basic U-Boot that can be used as a payload
> > for the m1n1 boot loader being developed by the Asahi Linux
> > project.
> >
> > Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
> > ---
> >  arch/arm/Kconfig                    |  22 ++++
> >  arch/arm/Makefile                   |   1 +
> >  arch/arm/mach-apple/Kconfig         |  18 ++++
> >  arch/arm/mach-apple/Makefile        |   4 +
> >  arch/arm/mach-apple/board.c         | 158 ++++++++++++++++++++++++++++
> >  arch/arm/mach-apple/lowlevel_init.S |  16 +++
> >  configs/apple_m1_defconfig          |  14 +++
> >  include/configs/apple.h             |  38 +++++++
> >  8 files changed, 271 insertions(+)
> >  create mode 100644 arch/arm/mach-apple/Kconfig
> >  create mode 100644 arch/arm/mach-apple/Makefile
> >  create mode 100644 arch/arm/mach-apple/board.c
> >  create mode 100644 arch/arm/mach-apple/lowlevel_init.S
> >  create mode 100644 configs/apple_m1_defconfig
> >  create mode 100644 include/configs/apple.h
> >
> > diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> > index b5bd3284cd..7cdea1f615 100644
> > --- a/arch/arm/Kconfig
> > +++ b/arch/arm/Kconfig
> > @@ -895,6 +895,26 @@ config ARCH_NEXELL
> >         select DM
> >         select GPIO_EXTRA_HEADER
> >
> > +config ARCH_APPLE
> > +       bool "Apple SoCs"
> > +       select ARM64
> > +       select LINUX_KERNEL_IMAGE_HEADER
> > +       select POSITION_INDEPENDENT
> > +       select BLK
> > +       select DM
> > +       select DM_KEYBOARD
> > +       select DM_SERIAL
> > +       select DM_USB
> > +       select DM_VIDEO
> > +       select CMD_USB
> > +       select MISC
> > +       select OF_CONTROL
> > +       select OF_BOARD
> > +       select USB
> > +       imply CMD_DM
> > +       imply CMD_GPT
> > +       imply DISTRO_DEFAULTS
> 
> Suggest sorting these

As in sort all the selects alphabetically and sort all the implies
alphabetically seperately?

Does my use of impy here even make sense?

This whole Kconfig stuff is a bit alien to me and I must say that it
isn't obvious what "best-practice" is in this area...

> > +
> >  config ARCH_OWL
> >         bool "Actions Semi OWL SoCs"
> >         select DM
> > @@ -1932,6 +1952,8 @@ config ISW_ENTRY_ADDR
> >           image headers.
> >  endif
> >
> > +source "arch/arm/mach-apple/Kconfig"
> > +
> >  source "arch/arm/mach-aspeed/Kconfig"
> >
> >  source "arch/arm/mach-at91/Kconfig"
> > diff --git a/arch/arm/Makefile b/arch/arm/Makefile
> > index c68e598a67..44178c204b 100644
> > --- a/arch/arm/Makefile
> > +++ b/arch/arm/Makefile
> > @@ -51,6 +51,7 @@ PLATFORM_CPPFLAGS += $(arch-y) $(tune-y)
> >
> >  # Machine directory name.  This list is sorted alphanumerically
> >  # by CONFIG_* macro name.
> > +machine-$(CONFIG_ARCH_APPLE)           += apple
> >  machine-$(CONFIG_ARCH_ASPEED)          += aspeed
> >  machine-$(CONFIG_ARCH_AT91)            += at91
> >  machine-$(CONFIG_ARCH_BCM283X)         += bcm283x
> > diff --git a/arch/arm/mach-apple/Kconfig b/arch/arm/mach-apple/Kconfig
> > new file mode 100644
> > index 0000000000..66cab91b2a
> > --- /dev/null
> > +++ b/arch/arm/mach-apple/Kconfig
> > @@ -0,0 +1,18 @@
> > +if ARCH_APPLE
> > +
> > +config SYS_TEXT_BASE
> > +       default 0x00000000
> > +
> > +config SYS_CONFIG_NAME
> > +       default "apple"
> > +
> > +config SYS_SOC
> > +       default "m1"
> > +
> > +config SYS_MALLOC_LEN
> > +       default 0x4000000
> > +
> > +config SYS_MALLOC_F_LEN
> > +       default 0x4000
> > +
> > +endif
> > diff --git a/arch/arm/mach-apple/Makefile b/arch/arm/mach-apple/Makefile
> > new file mode 100644
> > index 0000000000..e74a8c9df1
> > --- /dev/null
> > +++ b/arch/arm/mach-apple/Makefile
> > @@ -0,0 +1,4 @@
> > +# SPDX-License-Identifier: GPL-2.0+
> > +
> > +obj-y += board.o
> > +obj-y += lowlevel_init.o
> > diff --git a/arch/arm/mach-apple/board.c b/arch/arm/mach-apple/board.c
> > new file mode 100644
> > index 0000000000..0c8b35292e
> > --- /dev/null
> > +++ b/arch/arm/mach-apple/board.c
> > @@ -0,0 +1,158 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/*
> > + * (C) Copyright 2021 Mark Kettenis <kettenis@openbsd.org>
> > + */
> > +
> > +#include <common.h>
> > +#include <efi_loader.h>
> > +
> > +#include <asm/armv8/mmu.h>
> > +#include <asm/global_data.h>
> > +#include <asm/io.h>
> > +#include <asm/system.h>
> > +
> > +DECLARE_GLOBAL_DATA_PTR;
> > +
> > +static struct mm_region apple_mem_map[] = {
> > +       {
> > +               /* I/O */
> > +               .virt = 0x200000000,
> > +               .phys = 0x200000000,
> > +               .size = 8UL * SZ_1G,
> > +               .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
> > +                        PTE_BLOCK_NON_SHARE |
> > +                        PTE_BLOCK_PXN | PTE_BLOCK_UXN
> > +       }, {
> > +               /* I/O */
> > +               .virt = 0x500000000,
> > +               .phys = 0x500000000,
> > +               .size = 2UL * SZ_1G,
> > +               .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
> > +                        PTE_BLOCK_NON_SHARE |
> > +                        PTE_BLOCK_PXN | PTE_BLOCK_UXN
> > +       }, {
> > +               /* I/O */
> > +               .virt = 0x680000000,
> > +               .phys = 0x680000000,
> > +               .size = SZ_512M,
> > +               .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
> > +                        PTE_BLOCK_NON_SHARE |
> > +                        PTE_BLOCK_PXN | PTE_BLOCK_UXN
> > +       }, {
> > +               /* PCIE */
> > +               .virt = 0x6a0000000,
> > +               .phys = 0x6a0000000,
> > +               .size = SZ_512M,
> > +               .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRE) |
> > +                        PTE_BLOCK_INNER_SHARE |
> > +                        PTE_BLOCK_PXN | PTE_BLOCK_UXN
> > +       }, {
> > +               /* PCIE */
> > +               .virt = 0x6c0000000,
> > +               .phys = 0x6c0000000,
> > +               .size = SZ_1G,
> > +               .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRE) |
> > +                        PTE_BLOCK_INNER_SHARE |
> > +                        PTE_BLOCK_PXN | PTE_BLOCK_UXN
> > +       }, {
> > +               /* RAM */
> > +               .virt = 0x800000000,
> > +               .phys = 0x800000000,
> > +               .size = 8UL * SZ_1G,
> > +               .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
> > +                        PTE_BLOCK_INNER_SHARE
> > +       }, {
> > +               /* Empty entry for framebuffer */
> > +               0,
> > +       }, {
> > +               /* List terminator */
> > +               0,
> > +       }
> > +};
> > +
> > +struct mm_region *mem_map = apple_mem_map;
> > +
> > +int board_init(void)
> > +{
> > +       return 0;
> > +}
> > +
> > +int dram_init(void)
> > +{
> > +       int index, node, ret;
> > +       fdt_addr_t base;
> > +       fdt_size_t size;
> > +
> > +       ret = fdtdec_setup_mem_size_base();
> > +       if (ret)
> > +               return ret;
> > +
> > +       /* Update RAM mapping. */
> 
> Do you want the period at the end of that?

Given that Bin brought up the same thing, I gather that not having a
full stop at the end of single-line comments is preferred?
 
> > +       index = ARRAY_SIZE(apple_mem_map) - 3;
> > +       apple_mem_map[index].virt = gd->ram_base;
> > +       apple_mem_map[index].phys = gd->ram_base;
> > +       apple_mem_map[index].size = gd->ram_size;
> > +
> > +       node = fdt_path_offset(gd->fdt_blob, "/chosen/framebuffer");
> 
> Can you use the ofnode interface here and below?

I can try...

> > +       if (node < 0)
> > +               return 0;
> > +
> > +       base = fdtdec_get_addr_size(gd->fdt_blob, node, "reg", &size);
> > +       if (base == FDT_ADDR_T_NONE)
> > +               return 0;
> > +
> > +       /* Add framebuffer mapping. */
> > +       index = ARRAY_SIZE(apple_mem_map) - 2;
> > +       apple_mem_map[index].virt = base;
> > +       apple_mem_map[index].phys = base;
> > +       apple_mem_map[index].size = size;
> > +       apple_mem_map[index].attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL_NC) |
> > +               PTE_BLOCK_INNER_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN;
> > +
> > +       return 0;
> > +}
> > +
> > +int dram_init_banksize(void)
> > +{
> > +       return fdtdec_setup_memory_banksize();
> > +}
> > +
> > +#define APPLE_WDT_BASE         0x23d2b0000ULL
> 
> should be in DT I think, with a driver
> 
> > +
> > +#define APPLE_WDT_SYS_CTL_ENABLE       BIT(2)
> > +
> > +typedef struct apple_wdt {
> 
> Needs comments
> 
> > +       u32     reserved0[3];
> > +       u32     chip_ctl;
> > +       u32     sys_tmr;
> > +       u32     sys_cmp;
> > +       u32     reserved1;
> > +       u32     sys_ctl;
> > +} apple_wdt_t;
> > +
> > +void reset_cpu(void)
> 
> You should add a sysreset driver, as Bin says.
> 
> > +{
> > +       apple_wdt_t *wdt = (apple_wdt_t *)APPLE_WDT_BASE;
> > +
> > +       writel(0, &wdt->sys_cmp);
> > +       writel(APPLE_WDT_SYS_CTL_ENABLE, &wdt->sys_ctl);
> > +
> > +       while(1)
> > +               wfi();
> > +}
> > +
> > +extern long fw_dtb_pointer;
> 
> comment
> 
> > +
> > +void *board_fdt_blob_setup(void)
> > +{
> > +       return (void *)fw_dtb_pointer;
> > +}
> > +
> > +ulong board_get_usable_ram_top(ulong total_size)
> > +{
> > +       /*
> > +        * Top part of RAM is used by firmware for things like the
> > +        * framebuffer.  This gives us plenty of room to play with.
> > +        */
> > +       return 0x980000000;
> > +}
> > diff --git a/arch/arm/mach-apple/lowlevel_init.S b/arch/arm/mach-apple/lowlevel_init.S
> > new file mode 100644
> > index 0000000000..0f5313163e
> > --- /dev/null
> > +++ b/arch/arm/mach-apple/lowlevel_init.S
> > @@ -0,0 +1,16 @@
> > +/* SPDX-License-Identifier: GPL-2.0+ */
> > +/*
> > + * (C) Copyright 2021 Mark Kettenis <kettenis@openbsd.org>
> > + */
> > +
> > +.align 8
> > +.global fw_dtb_pointer
> > +fw_dtb_pointer:
> > +       .quad   0
> > +
> > +.global save_boot_params
> > +save_boot_params:
> > +       adr     x1, fw_dtb_pointer
> 
> could use a comment as to where this is set up. Previous-stage
> firmware, I suppose?

Yes.  I'm basically making U-Boot look like a Linux kernel, and m1n1
passes the DT in x1 just like the Linux kernel expects.

I suspect using CONFIG_OF_PRIOR_STAGE would make it more obvious what
is happening here.  But (a) I didn't know that existed and (b) we
discussed removing that option in the near future.


> > +       str     x0, [x1]
> > +
> > +       b       save_boot_params_ret
> > diff --git a/configs/apple_m1_defconfig b/configs/apple_m1_defconfig
> > new file mode 100644
> > index 0000000000..a7ae15576b
> > --- /dev/null
> > +++ b/configs/apple_m1_defconfig
> > @@ -0,0 +1,14 @@
> > +CONFIG_ARM=y
> > +CONFIG_ARCH_APPLE=y
> > +# CONFIG_DISPLAY_CPUINFO is not set
> > +# CONFIG_MMC is not set
> > +# CONFIG_NET is not set
> > +CONFIG_VIDEO_SIMPLE=y
> > +CONFIG_DISPLAY_BOARDINFO_LATE=y
> > +CONFIG_USB_XHCI_HCD=y
> > +CONFIG_USB_XHCI_DWC3=y
> > +CONFIG_USB_KEYBOARD=y
> > +CONFIG_USB_STORAGE=y
> > +CONFIG_USE_PREBOOT=y
> > +CONFIG_PREBOOT="usb start"
> > +# CONFIG_GENERATE_SMBIOS_TABLE is not set
> > diff --git a/include/configs/apple.h b/include/configs/apple.h
> > new file mode 100644
> > index 0000000000..1c246af002
> > --- /dev/null
> > +++ b/include/configs/apple.h
> > @@ -0,0 +1,38 @@
> > +#ifndef __CONFIG_H
> > +#define __CONFIG_H
> > +
> > +#include <linux/sizes.h>
> > +
> > +#define CONFIG_SYS_LOAD_ADDR   0x880000000
> > +
> > +#define CONFIG_SYS_SDRAM_BASE  0x880000000
> > +
> > +#define CONFIG_LNX_KRNL_IMG_TEXT_OFFSET_BASE   CONFIG_SYS_TEXT_BASE
> > +
> > +/* Environment */
> > +#define ENV_DEVICE_SETTINGS \
> > +       "stdin=serial,usbkbd\0" \
> > +       "stdout=serial,vidconsole\0" \
> > +       "stderr=serial,vidconsole\0"
> > +
> > +#define ENV_MEM_LAYOUT_SETTINGS \
> > +       "fdt_addr_r=0x960100000\0" \
> > +       "kernel_addr_r=0x960200000\0"
> > +
> > +#if CONFIG_IS_ENABLED(CMD_USB)
> > +       #define BOOT_TARGET_USB(func) func(USB, usb, 0)
> > +#else
> > +       #define BOOT_TARGET_USB(func)
> > +#endif
> > +
> > +#define BOOT_TARGET_DEVICES(func) \
> > +       BOOT_TARGET_USB(func)
> > +
> > +#include <config_distro_bootcmd.h>
> > +
> > +#define CONFIG_EXTRA_ENV_SETTINGS \
> > +       ENV_DEVICE_SETTINGS \
> > +       ENV_MEM_LAYOUT_SETTINGS \
> > +       BOOTENV
> > +
> > +#endif
> > --
> > 2.33.0
> >
> 
> Regards,
> Simon
> 

^ permalink raw reply	[flat|nested] 46+ messages in thread

* Re: [PATCH 1/5] arm: apple: Add initial support for Apple's M1 SoC
  2021-09-20  8:49     ` Mark Kettenis
@ 2021-09-21  1:11       ` Simon Glass
  0 siblings, 0 replies; 46+ messages in thread
From: Simon Glass @ 2021-09-21  1:11 UTC (permalink / raw)
  To: Mark Kettenis
  Cc: Mark Kettenis, U-Boot Mailing List, Bharat Gooty,
	Rayagonda Kokatanur, Oliver Graute, Bin Meng, Leo Liang,
	Tianrui Wei, Stephan Gerhold, Padmarao Begari,
	Kishon Vijay Abraham I, Heinrich Schuchardt, Michael Walle,
	Masami Hiramatsu, Asherah Connor, Wasim Khan, Michal Simek,
	Igor Opaniuk, Heiko Schocher, Ye Li, Stefan Roese, Vabhav Sharma,
	Marek Behún, Weijie Gao, AKASHI Takahiro, Andy Shevchenko,
	Pratyush Yadav

Hi Mark,

On Mon, 20 Sept 2021 at 02:49, Mark Kettenis <mark.kettenis@xs4all.nl> wrote:
>
> > From: Simon Glass <sjg@chromium.org>
> > Date: Sun, 19 Sep 2021 21:15:57 -0600
> >
> > Hi Mark,
> >
> > On Sat, 18 Sept 2021 at 07:55, Mark Kettenis <kettenis@openbsd.org> wrote:
> > >
> > > Add support for Apple's M1 SoC that is used in "Apple Silicon"
> > > Macs.  This builds a basic U-Boot that can be used as a payload
> > > for the m1n1 boot loader being developed by the Asahi Linux
> > > project.
> > >
> > > Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
> > > ---
> > >  arch/arm/Kconfig                    |  22 ++++
> > >  arch/arm/Makefile                   |   1 +
> > >  arch/arm/mach-apple/Kconfig         |  18 ++++
> > >  arch/arm/mach-apple/Makefile        |   4 +
> > >  arch/arm/mach-apple/board.c         | 158 ++++++++++++++++++++++++++++
> > >  arch/arm/mach-apple/lowlevel_init.S |  16 +++
> > >  configs/apple_m1_defconfig          |  14 +++
> > >  include/configs/apple.h             |  38 +++++++
> > >  8 files changed, 271 insertions(+)
> > >  create mode 100644 arch/arm/mach-apple/Kconfig
> > >  create mode 100644 arch/arm/mach-apple/Makefile
> > >  create mode 100644 arch/arm/mach-apple/board.c
> > >  create mode 100644 arch/arm/mach-apple/lowlevel_init.S
> > >  create mode 100644 configs/apple_m1_defconfig
> > >  create mode 100644 include/configs/apple.h
> > >
> > > diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> > > index b5bd3284cd..7cdea1f615 100644
> > > --- a/arch/arm/Kconfig
> > > +++ b/arch/arm/Kconfig
> > > @@ -895,6 +895,26 @@ config ARCH_NEXELL
> > >         select DM
> > >         select GPIO_EXTRA_HEADER
> > >
> > > +config ARCH_APPLE
> > > +       bool "Apple SoCs"
> > > +       select ARM64
> > > +       select LINUX_KERNEL_IMAGE_HEADER
> > > +       select POSITION_INDEPENDENT
> > > +       select BLK
> > > +       select DM
> > > +       select DM_KEYBOARD
> > > +       select DM_SERIAL
> > > +       select DM_USB
> > > +       select DM_VIDEO
> > > +       select CMD_USB
> > > +       select MISC
> > > +       select OF_CONTROL
> > > +       select OF_BOARD
> > > +       select USB
> > > +       imply CMD_DM
> > > +       imply CMD_GPT
> > > +       imply DISTRO_DEFAULTS
> >
> > Suggest sorting these
>
> As in sort all the selects alphabetically and sort all the implies
> alphabetically seperately?

I suppose so.

>
> Does my use of impy here even make sense?

It allows people to disable it, whereas select does not. It looks OK to me.

>
> This whole Kconfig stuff is a bit alien to me and I must say that it
> isn't obvious what "best-practice" is in this area...

We try to avoid select so only use it if it really cannot build/run
without that feature. From what I can tell you have done that.

I know this is a different project, but there are some ideas here:

https://docs.zephyrproject.org/1.14.0/guides/kconfig/index.html

[..]

> > > +int dram_init(void)
> > > +{
> > > +       int index, node, ret;
> > > +       fdt_addr_t base;
> > > +       fdt_size_t size;
> > > +
> > > +       ret = fdtdec_setup_mem_size_base();
> > > +       if (ret)
> > > +               return ret;
> > > +
> > > +       /* Update RAM mapping. */
> >
> > Do you want the period at the end of that?
>
> Given that Bin brought up the same thing, I gather that not having a
> full stop at the end of single-line comments is preferred?

Yes, the periods just clutter things and people start adding them only
when it is a valid sentence, etc. Best to just leave them out.

>
> > > +       index = ARRAY_SIZE(apple_mem_map) - 3;
> > > +       apple_mem_map[index].virt = gd->ram_base;
> > > +       apple_mem_map[index].phys = gd->ram_base;
> > > +       apple_mem_map[index].size = gd->ram_size;
> > > +
> > > +       node = fdt_path_offset(gd->fdt_blob, "/chosen/framebuffer");
> >
> > Can you use the ofnode interface here and below?
>
> I can try...

Something like:

ofnode node;

node = ofnode_path("/chosen/framebuffer");

then use ofnode_get_addr_size()

>
> > > +       if (node < 0)
> > > +               return 0;
> > > +
> > > +       base = fdtdec_get_addr_size(gd->fdt_blob, node, "reg", &size);
> > > +       if (base == FDT_ADDR_T_NONE)
> > > +               return 0;
> > > +
> > > +       /* Add framebuffer mapping. */
> > > +       index = ARRAY_SIZE(apple_mem_map) - 2;
> > > +       apple_mem_map[index].virt = base;
> > > +       apple_mem_map[index].phys = base;
> > > +       apple_mem_map[index].size = size;
> > > +       apple_mem_map[index].attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL_NC) |
> > > +               PTE_BLOCK_INNER_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN;
> > > +
> > > +       return 0;
> > > +}

[..]

> > > diff --git a/arch/arm/mach-apple/lowlevel_init.S b/arch/arm/mach-apple/lowlevel_init.S
> > > new file mode 100644
> > > index 0000000000..0f5313163e
> > > --- /dev/null
> > > +++ b/arch/arm/mach-apple/lowlevel_init.S
> > > @@ -0,0 +1,16 @@
> > > +/* SPDX-License-Identifier: GPL-2.0+ */
> > > +/*
> > > + * (C) Copyright 2021 Mark Kettenis <kettenis@openbsd.org>
> > > + */
> > > +
> > > +.align 8
> > > +.global fw_dtb_pointer
> > > +fw_dtb_pointer:
> > > +       .quad   0
> > > +
> > > +.global save_boot_params
> > > +save_boot_params:
> > > +       adr     x1, fw_dtb_pointer
> >
> > could use a comment as to where this is set up. Previous-stage
> > firmware, I suppose?
>
> Yes.  I'm basically making U-Boot look like a Linux kernel, and m1n1
> passes the DT in x1 just like the Linux kernel expects.
>
> I suspect using CONFIG_OF_PRIOR_STAGE would make it more obvious what
> is happening here.  But (a) I didn't know that existed and (b) we
> discussed removing that option in the near future.

That sounds right to me, but a comment would help.

Regards,
Simon

^ permalink raw reply	[flat|nested] 46+ messages in thread

* Re: [PATCH 3/5] misc: Add Apple DART driver
  2021-09-20  8:33     ` Mark Kettenis
@ 2021-09-21  1:11       ` Simon Glass
  2021-09-25 13:27         ` Simon Glass
  2021-09-26 20:53         ` Mark Kettenis
  0 siblings, 2 replies; 46+ messages in thread
From: Simon Glass @ 2021-09-21  1:11 UTC (permalink / raw)
  To: Mark Kettenis
  Cc: Mark Kettenis, U-Boot Mailing List, Oliver Graute,
	Stephan Gerhold, Masami Hiramatsu, Priyanka Jain, Leo Liang,
	Padmarao Begari, Michael Walle, Kishon Vijay Abraham I,
	Heinrich Schuchardt, Bin Meng, Asherah Connor, Michal Simek,
	Wasim Khan, Heiko Schocher, Igor Opaniuk, Ye Li, Stefan Roese,
	AKASHI Takahiro, Weijie Gao, Vabhav Sharma, Andy Shevchenko,
	Pratyush Yadav

Hi Mark,

On Mon, 20 Sept 2021 at 02:33, Mark Kettenis <mark.kettenis@xs4all.nl> wrote:
>
> > From: Simon Glass <sjg@chromium.org>
> > Date: Sun, 19 Sep 2021 21:16:00 -0600
> >
> > Hi Mark,
> >
> > On Sat, 18 Sept 2021 at 07:55, Mark Kettenis <kettenis@openbsd.org> wrote:
> > >
> > > The DART is an IOMMU that is used on Apple's M1 SoC.  This driver
> > > supports the DART in bypass mode as well as in a mode where it
> > > creates a 1:1 mapping of a subset of RAM as not all DARTs support
> > > bypass mode.  The USB3 ports integrated on the SoC use a DART
> > > that supports bypass mode.  The 1:1 mapping will be used in the
> > > future to support other devices such as the PCIe host bridge
> > > of the M1 SoC.
> > >
> > > Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
> > > ---
> > >  drivers/misc/Kconfig      |   7 ++
> > >  drivers/misc/Makefile     |   1 +
> > >  drivers/misc/apple_dart.c | 171 ++++++++++++++++++++++++++++++++++++++
> > >  3 files changed, 179 insertions(+)
> > >  create mode 100644 drivers/misc/apple_dart.c
> > >

[..]

> > > +
> > > +struct apple_dart_priv {
> >
> > How about s/apple_dart/dart/ ?
> >
> > It makes the code easier to read.
>
> I think using apple_dart_ consistently as a prefix makes more sense.

OK I don't mind too much. I just prefer shorter code and sometimes
people use globally unique things in drivers when it really doesn't
help anything.

>
> > > +       struct clk_bulk clks;
> > > +       void *base;
> > > +};
> > > +
> > > +dma_addr_t apple_dart_bus_start;
> > > +phys_addr_t apple_dart_phys_start;
> > > +phys_size_t apple_dart_size = SZ_512M;
> >
> > Try to avoid variables in drivers. Can these go in a priv struct?
>
> Not really since the intent is that these variables specify a global
> "window" that is mapped 1:1 into all the DARTs.

So there are multiple DART devices? In that can you could store this
info in a priv struct attached to the uclass.

[..]

> > > +static int apple_dart_bind(struct udevice *dev)
> > > +{
> > > +       void *base;
> > > +       int sid, i;
> > > +
> > > +       base = dev_read_addr_ptr(dev);
> > > +       if (!base)
> > > +               return -EINVAL;
> > > +
> > > +       u32 params2 = readl(base + DART_PARAMS2);
> > > +       if (params2 & DART_PARAMS2_BYPASS_SUPPORT) {
> > > +               for (sid = 0; sid < 16; sid++) {
> > > +                       writel(DART_TCR_BYPASS_DART | DART_TCR_BYPASS_DAPF,
> > > +                              base + DART_TCR(sid));
> > > +                       for (i = 0; i < 4; i++)
> > > +                               writel(0, base + DART_TTBR(sid, i));
> > > +               }
> > > +       }
> >
> > Not allowed hardware access in bind(). Can this more to probe() ?
>
> Well, I need to make sure that this happens before other drivers get
> probed (in particular the xhci-dwc3 driver).  Is there a better
> mechanism to achieve that?

If those drivers have something in the DT indicating that they need
this, then you can add a uclass_get_device_by_phandle() in those
drivers.

If not, then you can probe all the DART devices with uclass_probe_all().

Having said that, I see you are using UCLASS_MISC. I suspect this
should have its own UCLASS_IOMMU.

[..]

> >
> > > +               memset(l2, 0, SZ_16K);
> > > +
> > > +               for (j = 0; j < 2048; j++) {
> > > +                       l2[j] = phys | 0x3;
> > > +                       phys += SZ_16K;
> > > +               }
> > > +               flush_dcache_range((unsigned long)l2,
> > > +                                  (unsigned long)l2 + SZ_16K);
> > > +
> > > +               l1[i++] = (phys_addr_t)l2 | 0x8 | 0x3;
> >
> > Do you need the cast? What are the magic numbers here? Can you use an
> > enum/#define ?
>
> Not sure if we know the exact meaning of those bits yet.  But there is
> a Linux driver now, so maybe I need to look at it again.

Oh well, a comment that we don't know is fine, too. People can fix it
later if it becomes known.

[..]

Regards,
Simon

^ permalink raw reply	[flat|nested] 46+ messages in thread

* Re: [PATCH 1/5] arm: apple: Add initial support for Apple's M1 SoC
  2021-09-19 20:33       ` Mark Kettenis
@ 2021-09-21 12:42         ` Tom Rini
  2021-09-21 15:53           ` Bin Meng
  0 siblings, 1 reply; 46+ messages in thread
From: Tom Rini @ 2021-09-21 12:42 UTC (permalink / raw)
  To: Mark Kettenis, Bin Meng
  Cc: kettenis, u-boot, bharat.gooty, rayagonda.kokatanur,
	oliver.graute, bin.meng, ycliang, tianrui-wei, stephan,
	padmarao.begari, kishon, xypron.glpk, michael, masami.hiramatsu,
	sjg, ashe, wasim.khan, michal.simek, igor.opaniuk, hs, ye.li, sr,
	vabhav.sharma, marek.behun, weijie.gao, takahiro.akashi,
	andriy.shevchenko, p.yadav

[-- Attachment #1: Type: text/plain, Size: 12113 bytes --]

On Sun, Sep 19, 2021 at 10:33:25PM +0200, Mark Kettenis wrote:
> > From: Bin Meng <bmeng.cn@gmail.com>
> > Date: Sun, 19 Sep 2021 09:17:07 +0800
> > 
> > Hi Mark,
> > 
> > On Sun, Sep 19, 2021 at 9:04 AM Bin Meng <bmeng.cn@gmail.com> wrote:
> > >
> > > Hi Mark,
> > >
> > > On Sat, Sep 18, 2021 at 9:55 PM Mark Kettenis <kettenis@openbsd.org> wrote:
> > > >
> > > > Add support for Apple's M1 SoC that is used in "Apple Silicon"
> > > > Macs.  This builds a basic U-Boot that can be used as a payload
> > > > for the m1n1 boot loader being developed by the Asahi Linux
> > > > project.
> > > >
> > > > Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
> > > > ---
> > > >  arch/arm/Kconfig                    |  22 ++++
> > > >  arch/arm/Makefile                   |   1 +
> > > >  arch/arm/mach-apple/Kconfig         |  18 ++++
> > > >  arch/arm/mach-apple/Makefile        |   4 +
> > > >  arch/arm/mach-apple/board.c         | 158 ++++++++++++++++++++++++++++
> > > >  arch/arm/mach-apple/lowlevel_init.S |  16 +++
> > > >  configs/apple_m1_defconfig          |  14 +++
> > > >  include/configs/apple.h             |  38 +++++++
> > > >  8 files changed, 271 insertions(+)
> > > >  create mode 100644 arch/arm/mach-apple/Kconfig
> > > >  create mode 100644 arch/arm/mach-apple/Makefile
> > > >  create mode 100644 arch/arm/mach-apple/board.c
> > > >  create mode 100644 arch/arm/mach-apple/lowlevel_init.S
> > > >  create mode 100644 configs/apple_m1_defconfig
> > > >  create mode 100644 include/configs/apple.h
> > > >
> > > > diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> > > > index b5bd3284cd..7cdea1f615 100644
> > > > --- a/arch/arm/Kconfig
> > > > +++ b/arch/arm/Kconfig
> > > > @@ -895,6 +895,26 @@ config ARCH_NEXELL
> > > >         select DM
> > > >         select GPIO_EXTRA_HEADER
> > > >
> > > > +config ARCH_APPLE
> > > > +       bool "Apple SoCs"
> > > > +       select ARM64
> > > > +       select LINUX_KERNEL_IMAGE_HEADER
> > > > +       select POSITION_INDEPENDENT
> > > > +       select BLK
> > > > +       select DM
> > > > +       select DM_KEYBOARD
> > > > +       select DM_SERIAL
> > > > +       select DM_USB
> > > > +       select DM_VIDEO
> > > > +       select CMD_USB
> > > > +       select MISC
> > > > +       select OF_CONTROL
> > > > +       select OF_BOARD
> > > > +       select USB
> > > > +       imply CMD_DM
> > > > +       imply CMD_GPT
> > > > +       imply DISTRO_DEFAULTS
> > > > +
> > > >  config ARCH_OWL
> > > >         bool "Actions Semi OWL SoCs"
> > > >         select DM
> > > > @@ -1932,6 +1952,8 @@ config ISW_ENTRY_ADDR
> > > >           image headers.
> > > >  endif
> > > >
> > > > +source "arch/arm/mach-apple/Kconfig"
> > > > +
> > > >  source "arch/arm/mach-aspeed/Kconfig"
> > > >
> > > >  source "arch/arm/mach-at91/Kconfig"
> > > > diff --git a/arch/arm/Makefile b/arch/arm/Makefile
> > > > index c68e598a67..44178c204b 100644
> > > > --- a/arch/arm/Makefile
> > > > +++ b/arch/arm/Makefile
> > > > @@ -51,6 +51,7 @@ PLATFORM_CPPFLAGS += $(arch-y) $(tune-y)
> > > >
> > > >  # Machine directory name.  This list is sorted alphanumerically
> > > >  # by CONFIG_* macro name.
> > > > +machine-$(CONFIG_ARCH_APPLE)           += apple
> > > >  machine-$(CONFIG_ARCH_ASPEED)          += aspeed
> > > >  machine-$(CONFIG_ARCH_AT91)            += at91
> > > >  machine-$(CONFIG_ARCH_BCM283X)         += bcm283x
> > > > diff --git a/arch/arm/mach-apple/Kconfig b/arch/arm/mach-apple/Kconfig
> > > > new file mode 100644
> > > > index 0000000000..66cab91b2a
> > > > --- /dev/null
> > > > +++ b/arch/arm/mach-apple/Kconfig
> > > > @@ -0,0 +1,18 @@
> > > > +if ARCH_APPLE
> > > > +
> > > > +config SYS_TEXT_BASE
> > > > +       default 0x00000000
> > > > +
> > > > +config SYS_CONFIG_NAME
> > > > +       default "apple"
> > > > +
> > > > +config SYS_SOC
> > > > +       default "m1"
> > > > +
> > > > +config SYS_MALLOC_LEN
> > > > +       default 0x4000000
> > > > +
> > > > +config SYS_MALLOC_F_LEN
> > > > +       default 0x4000
> > > > +
> > > > +endif
> > > > diff --git a/arch/arm/mach-apple/Makefile b/arch/arm/mach-apple/Makefile
> > > > new file mode 100644
> > > > index 0000000000..e74a8c9df1
> > > > --- /dev/null
> > > > +++ b/arch/arm/mach-apple/Makefile
> > > > @@ -0,0 +1,4 @@
> > > > +# SPDX-License-Identifier: GPL-2.0+
> > > > +
> > > > +obj-y += board.o
> > > > +obj-y += lowlevel_init.o
> > > > diff --git a/arch/arm/mach-apple/board.c b/arch/arm/mach-apple/board.c
> > > > new file mode 100644
> > > > index 0000000000..0c8b35292e
> > > > --- /dev/null
> > > > +++ b/arch/arm/mach-apple/board.c
> > > > @@ -0,0 +1,158 @@
> > > > +// SPDX-License-Identifier: GPL-2.0+
> > > > +/*
> > > > + * (C) Copyright 2021 Mark Kettenis <kettenis@openbsd.org>
> > > > + */
> > > > +
> > > > +#include <common.h>
> > > > +#include <efi_loader.h>
> > > > +
> > > > +#include <asm/armv8/mmu.h>
> > > > +#include <asm/global_data.h>
> > > > +#include <asm/io.h>
> > > > +#include <asm/system.h>
> > > > +
> > > > +DECLARE_GLOBAL_DATA_PTR;
> > > > +
> > > > +static struct mm_region apple_mem_map[] = {
> > > > +       {
> > > > +               /* I/O */
> > > > +               .virt = 0x200000000,
> > > > +               .phys = 0x200000000,
> > > > +               .size = 8UL * SZ_1G,
> > > > +               .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
> > > > +                        PTE_BLOCK_NON_SHARE |
> > > > +                        PTE_BLOCK_PXN | PTE_BLOCK_UXN
> > > > +       }, {
> > > > +               /* I/O */
> > > > +               .virt = 0x500000000,
> > > > +               .phys = 0x500000000,
> > > > +               .size = 2UL * SZ_1G,
> > > > +               .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
> > > > +                        PTE_BLOCK_NON_SHARE |
> > > > +                        PTE_BLOCK_PXN | PTE_BLOCK_UXN
> > > > +       }, {
> > > > +               /* I/O */
> > > > +               .virt = 0x680000000,
> > > > +               .phys = 0x680000000,
> > > > +               .size = SZ_512M,
> > > > +               .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
> > > > +                        PTE_BLOCK_NON_SHARE |
> > > > +                        PTE_BLOCK_PXN | PTE_BLOCK_UXN
> > > > +       }, {
> > > > +               /* PCIE */
> > > > +               .virt = 0x6a0000000,
> > > > +               .phys = 0x6a0000000,
> > > > +               .size = SZ_512M,
> > > > +               .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRE) |
> > > > +                        PTE_BLOCK_INNER_SHARE |
> > > > +                        PTE_BLOCK_PXN | PTE_BLOCK_UXN
> > > > +       }, {
> > > > +               /* PCIE */
> > > > +               .virt = 0x6c0000000,
> > > > +               .phys = 0x6c0000000,
> > > > +               .size = SZ_1G,
> > > > +               .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRE) |
> > > > +                        PTE_BLOCK_INNER_SHARE |
> > > > +                        PTE_BLOCK_PXN | PTE_BLOCK_UXN
> > > > +       }, {
> > > > +               /* RAM */
> > > > +               .virt = 0x800000000,
> > > > +               .phys = 0x800000000,
> > > > +               .size = 8UL * SZ_1G,
> > > > +               .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
> > > > +                        PTE_BLOCK_INNER_SHARE
> > > > +       }, {
> > > > +               /* Empty entry for framebuffer */
> > > > +               0,
> > > > +       }, {
> > > > +               /* List terminator */
> > > > +               0,
> > > > +       }
> > > > +};
> > > > +
> > > > +struct mm_region *mem_map = apple_mem_map;
> > > > +
> > > > +int board_init(void)
> > > > +{
> > > > +       return 0;
> > > > +}
> > > > +
> > > > +int dram_init(void)
> > > > +{
> > > > +       int index, node, ret;
> > > > +       fdt_addr_t base;
> > > > +       fdt_size_t size;
> > > > +
> > > > +       ret = fdtdec_setup_mem_size_base();
> > > > +       if (ret)
> > > > +               return ret;
> > > > +
> > > > +       /* Update RAM mapping. */
> > >
> > > nits: please remove the ending .
> > >
> > > > +       index = ARRAY_SIZE(apple_mem_map) - 3;
> > 
> > This is error prone. Someone else updating apple_mem_map may create an
> > incorrect index for us.
> 
> I don't see a better way without introducing more complexity.
> 
> > > > +       apple_mem_map[index].virt = gd->ram_base;
> > > > +       apple_mem_map[index].phys = gd->ram_base;
> > > > +       apple_mem_map[index].size = gd->ram_size;
> > > > +
> > > > +       node = fdt_path_offset(gd->fdt_blob, "/chosen/framebuffer");
> > > > +       if (node < 0)
> > > > +               return 0;
> > > > +
> > > > +       base = fdtdec_get_addr_size(gd->fdt_blob, node, "reg", &size);
> > > > +       if (base == FDT_ADDR_T_NONE)
> > > > +               return 0;
> > > > +
> > > > +       /* Add framebuffer mapping. */
> > >
> > > ditto
> > >
> > > > +       index = ARRAY_SIZE(apple_mem_map) - 2;
> > > > +       apple_mem_map[index].virt = base;
> > > > +       apple_mem_map[index].phys = base;
> > > > +       apple_mem_map[index].size = size;
> > > > +       apple_mem_map[index].attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL_NC) |
> > > > +               PTE_BLOCK_INNER_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN;
> > > > +
> > > > +       return 0;
> > > > +}
> > > > +
> > > > +int dram_init_banksize(void)
> > > > +{
> > > > +       return fdtdec_setup_memory_banksize();
> > > > +}
> > > > +
> > > > +#define APPLE_WDT_BASE         0x23d2b0000ULL
> > > > +
> > > > +#define APPLE_WDT_SYS_CTL_ENABLE       BIT(2)
> > > > +
> > > > +typedef struct apple_wdt {
> > > > +       u32     reserved0[3];
> > > > +       u32     chip_ctl;
> > > > +       u32     sys_tmr;
> > > > +       u32     sys_cmp;
> > > > +       u32     reserved1;
> > > > +       u32     sys_ctl;
> > > > +} apple_wdt_t;
> > > > +
> > > > +void reset_cpu(void)
> > >
> > > This looks like we should add a new sysreset driver for Apple Arm SoC.
> > >
> > > > +{
> > > > +       apple_wdt_t *wdt = (apple_wdt_t *)APPLE_WDT_BASE;
> > > > +
> > > > +       writel(0, &wdt->sys_cmp);
> > > > +       writel(APPLE_WDT_SYS_CTL_ENABLE, &wdt->sys_ctl);
> > > > +
> > > > +       while(1)
> > > > +               wfi();
> > > > +}
> > > > +
> > > > +extern long fw_dtb_pointer;
> > > > +
> > > > +void *board_fdt_blob_setup(void)
> > > > +{
> > > > +       return (void *)fw_dtb_pointer;
> > > > +}
> > > > +
> > > > +ulong board_get_usable_ram_top(ulong total_size)
> > > > +{
> > > > +       /*
> > > > +        * Top part of RAM is used by firmware for things like the
> > > > +        * framebuffer.  This gives us plenty of room to play with.
> > > > +        */
> > > > +       return 0x980000000;
> > > > +}
> > > > diff --git a/arch/arm/mach-apple/lowlevel_init.S b/arch/arm/mach-apple/lowlevel_init.S
> > > > new file mode 100644
> > > > index 0000000000..0f5313163e
> > > > --- /dev/null
> > > > +++ b/arch/arm/mach-apple/lowlevel_init.S
> > > > @@ -0,0 +1,16 @@
> > > > +/* SPDX-License-Identifier: GPL-2.0+ */
> > > > +/*
> > > > + * (C) Copyright 2021 Mark Kettenis <kettenis@openbsd.org>
> > > > + */
> > > > +
> > > > +.align 8
> > > > +.global fw_dtb_pointer
> > > > +fw_dtb_pointer:
> > > > +       .quad   0
> > >
> > > Is this filled in by m1n1?
> > 
> > Sorry I misread, so this is passed by m1n1 and filled in by U-Boot. I
> > think we should stop using CONFIG_OF_BOARD, and for such case we
> > should use CONFIG_OF_PRIOR_STAGE.
> 
> Yes, CONFIG_OF_PRIOR_STAGE would work as well.  But Tom was talking
> about removing that option in favour of CONFIG_OF_BOARD the other day.

Yes.  I was even looking for some feedback from you, Bin, on converting
some boards from CONFIG_OF_PRIOR_STAGE to CONFIG_OF_BOARD.  It seems
like CONFIG_OF_PRIOR_STAGE is a subset of CONFIG_OF_BOARD, at the cost
of possibly a few bytes.

-- 
Tom

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 659 bytes --]

^ permalink raw reply	[flat|nested] 46+ messages in thread

* Re: [PATCH 1/5] arm: apple: Add initial support for Apple's M1 SoC
  2021-09-21 12:42         ` Tom Rini
@ 2021-09-21 15:53           ` Bin Meng
  2021-09-21 16:04             ` Tom Rini
  2021-09-21 16:08             ` Mark Kettenis
  0 siblings, 2 replies; 46+ messages in thread
From: Bin Meng @ 2021-09-21 15:53 UTC (permalink / raw)
  To: Tom Rini
  Cc: Mark Kettenis, Mark Kettenis, U-Boot Mailing List,
	Bharat Kumar Reddy Gooty, Rayagonda Kokatanur, Oliver Graute,
	Bin Meng, Leo Yu-Chi Liang, Tianrui Wei, Stephan Gerhold,
	Padmarao Begari, Kishon Vijay Abraham I, Heinrich Schuchardt,
	Michael Walle, Masami Hiramatsu, Simon Glass, Asherah Connor,
	Wasim Khan, Michal Simek, Igor Opaniuk, Heiko Schocher, Ye Li,
	Stefan Roese, Vabhav Sharma, Marek Behún, Weijie Gao,
	AKASHI Takahiro, Andy Shevchenko, Pratyush Yadav

On Tue, Sep 21, 2021 at 8:42 PM Tom Rini <trini@konsulko.com> wrote:
>
> On Sun, Sep 19, 2021 at 10:33:25PM +0200, Mark Kettenis wrote:
> > > From: Bin Meng <bmeng.cn@gmail.com>
> > > Date: Sun, 19 Sep 2021 09:17:07 +0800
> > >
> > > Hi Mark,
> > >
> > > On Sun, Sep 19, 2021 at 9:04 AM Bin Meng <bmeng.cn@gmail.com> wrote:
> > > >
> > > > Hi Mark,
> > > >
> > > > On Sat, Sep 18, 2021 at 9:55 PM Mark Kettenis <kettenis@openbsd.org> wrote:
> > > > >
> > > > > Add support for Apple's M1 SoC that is used in "Apple Silicon"
> > > > > Macs.  This builds a basic U-Boot that can be used as a payload
> > > > > for the m1n1 boot loader being developed by the Asahi Linux
> > > > > project.
> > > > >
> > > > > Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
> > > > > ---
> > > > >  arch/arm/Kconfig                    |  22 ++++
> > > > >  arch/arm/Makefile                   |   1 +
> > > > >  arch/arm/mach-apple/Kconfig         |  18 ++++
> > > > >  arch/arm/mach-apple/Makefile        |   4 +
> > > > >  arch/arm/mach-apple/board.c         | 158 ++++++++++++++++++++++++++++
> > > > >  arch/arm/mach-apple/lowlevel_init.S |  16 +++
> > > > >  configs/apple_m1_defconfig          |  14 +++
> > > > >  include/configs/apple.h             |  38 +++++++
> > > > >  8 files changed, 271 insertions(+)
> > > > >  create mode 100644 arch/arm/mach-apple/Kconfig
> > > > >  create mode 100644 arch/arm/mach-apple/Makefile
> > > > >  create mode 100644 arch/arm/mach-apple/board.c
> > > > >  create mode 100644 arch/arm/mach-apple/lowlevel_init.S
> > > > >  create mode 100644 configs/apple_m1_defconfig
> > > > >  create mode 100644 include/configs/apple.h
> > > > >
> > > > > diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> > > > > index b5bd3284cd..7cdea1f615 100644
> > > > > --- a/arch/arm/Kconfig
> > > > > +++ b/arch/arm/Kconfig
> > > > > @@ -895,6 +895,26 @@ config ARCH_NEXELL
> > > > >         select DM
> > > > >         select GPIO_EXTRA_HEADER
> > > > >
> > > > > +config ARCH_APPLE
> > > > > +       bool "Apple SoCs"
> > > > > +       select ARM64
> > > > > +       select LINUX_KERNEL_IMAGE_HEADER
> > > > > +       select POSITION_INDEPENDENT
> > > > > +       select BLK
> > > > > +       select DM
> > > > > +       select DM_KEYBOARD
> > > > > +       select DM_SERIAL
> > > > > +       select DM_USB
> > > > > +       select DM_VIDEO
> > > > > +       select CMD_USB
> > > > > +       select MISC
> > > > > +       select OF_CONTROL
> > > > > +       select OF_BOARD
> > > > > +       select USB
> > > > > +       imply CMD_DM
> > > > > +       imply CMD_GPT
> > > > > +       imply DISTRO_DEFAULTS
> > > > > +
> > > > >  config ARCH_OWL
> > > > >         bool "Actions Semi OWL SoCs"
> > > > >         select DM
> > > > > @@ -1932,6 +1952,8 @@ config ISW_ENTRY_ADDR
> > > > >           image headers.
> > > > >  endif
> > > > >
> > > > > +source "arch/arm/mach-apple/Kconfig"
> > > > > +
> > > > >  source "arch/arm/mach-aspeed/Kconfig"
> > > > >
> > > > >  source "arch/arm/mach-at91/Kconfig"
> > > > > diff --git a/arch/arm/Makefile b/arch/arm/Makefile
> > > > > index c68e598a67..44178c204b 100644
> > > > > --- a/arch/arm/Makefile
> > > > > +++ b/arch/arm/Makefile
> > > > > @@ -51,6 +51,7 @@ PLATFORM_CPPFLAGS += $(arch-y) $(tune-y)
> > > > >
> > > > >  # Machine directory name.  This list is sorted alphanumerically
> > > > >  # by CONFIG_* macro name.
> > > > > +machine-$(CONFIG_ARCH_APPLE)           += apple
> > > > >  machine-$(CONFIG_ARCH_ASPEED)          += aspeed
> > > > >  machine-$(CONFIG_ARCH_AT91)            += at91
> > > > >  machine-$(CONFIG_ARCH_BCM283X)         += bcm283x
> > > > > diff --git a/arch/arm/mach-apple/Kconfig b/arch/arm/mach-apple/Kconfig
> > > > > new file mode 100644
> > > > > index 0000000000..66cab91b2a
> > > > > --- /dev/null
> > > > > +++ b/arch/arm/mach-apple/Kconfig
> > > > > @@ -0,0 +1,18 @@
> > > > > +if ARCH_APPLE
> > > > > +
> > > > > +config SYS_TEXT_BASE
> > > > > +       default 0x00000000
> > > > > +
> > > > > +config SYS_CONFIG_NAME
> > > > > +       default "apple"
> > > > > +
> > > > > +config SYS_SOC
> > > > > +       default "m1"
> > > > > +
> > > > > +config SYS_MALLOC_LEN
> > > > > +       default 0x4000000
> > > > > +
> > > > > +config SYS_MALLOC_F_LEN
> > > > > +       default 0x4000
> > > > > +
> > > > > +endif
> > > > > diff --git a/arch/arm/mach-apple/Makefile b/arch/arm/mach-apple/Makefile
> > > > > new file mode 100644
> > > > > index 0000000000..e74a8c9df1
> > > > > --- /dev/null
> > > > > +++ b/arch/arm/mach-apple/Makefile
> > > > > @@ -0,0 +1,4 @@
> > > > > +# SPDX-License-Identifier: GPL-2.0+
> > > > > +
> > > > > +obj-y += board.o
> > > > > +obj-y += lowlevel_init.o
> > > > > diff --git a/arch/arm/mach-apple/board.c b/arch/arm/mach-apple/board.c
> > > > > new file mode 100644
> > > > > index 0000000000..0c8b35292e
> > > > > --- /dev/null
> > > > > +++ b/arch/arm/mach-apple/board.c
> > > > > @@ -0,0 +1,158 @@
> > > > > +// SPDX-License-Identifier: GPL-2.0+
> > > > > +/*
> > > > > + * (C) Copyright 2021 Mark Kettenis <kettenis@openbsd.org>
> > > > > + */
> > > > > +
> > > > > +#include <common.h>
> > > > > +#include <efi_loader.h>
> > > > > +
> > > > > +#include <asm/armv8/mmu.h>
> > > > > +#include <asm/global_data.h>
> > > > > +#include <asm/io.h>
> > > > > +#include <asm/system.h>
> > > > > +
> > > > > +DECLARE_GLOBAL_DATA_PTR;
> > > > > +
> > > > > +static struct mm_region apple_mem_map[] = {
> > > > > +       {
> > > > > +               /* I/O */
> > > > > +               .virt = 0x200000000,
> > > > > +               .phys = 0x200000000,
> > > > > +               .size = 8UL * SZ_1G,
> > > > > +               .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
> > > > > +                        PTE_BLOCK_NON_SHARE |
> > > > > +                        PTE_BLOCK_PXN | PTE_BLOCK_UXN
> > > > > +       }, {
> > > > > +               /* I/O */
> > > > > +               .virt = 0x500000000,
> > > > > +               .phys = 0x500000000,
> > > > > +               .size = 2UL * SZ_1G,
> > > > > +               .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
> > > > > +                        PTE_BLOCK_NON_SHARE |
> > > > > +                        PTE_BLOCK_PXN | PTE_BLOCK_UXN
> > > > > +       }, {
> > > > > +               /* I/O */
> > > > > +               .virt = 0x680000000,
> > > > > +               .phys = 0x680000000,
> > > > > +               .size = SZ_512M,
> > > > > +               .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
> > > > > +                        PTE_BLOCK_NON_SHARE |
> > > > > +                        PTE_BLOCK_PXN | PTE_BLOCK_UXN
> > > > > +       }, {
> > > > > +               /* PCIE */
> > > > > +               .virt = 0x6a0000000,
> > > > > +               .phys = 0x6a0000000,
> > > > > +               .size = SZ_512M,
> > > > > +               .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRE) |
> > > > > +                        PTE_BLOCK_INNER_SHARE |
> > > > > +                        PTE_BLOCK_PXN | PTE_BLOCK_UXN
> > > > > +       }, {
> > > > > +               /* PCIE */
> > > > > +               .virt = 0x6c0000000,
> > > > > +               .phys = 0x6c0000000,
> > > > > +               .size = SZ_1G,
> > > > > +               .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRE) |
> > > > > +                        PTE_BLOCK_INNER_SHARE |
> > > > > +                        PTE_BLOCK_PXN | PTE_BLOCK_UXN
> > > > > +       }, {
> > > > > +               /* RAM */
> > > > > +               .virt = 0x800000000,
> > > > > +               .phys = 0x800000000,
> > > > > +               .size = 8UL * SZ_1G,
> > > > > +               .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
> > > > > +                        PTE_BLOCK_INNER_SHARE
> > > > > +       }, {
> > > > > +               /* Empty entry for framebuffer */
> > > > > +               0,
> > > > > +       }, {
> > > > > +               /* List terminator */
> > > > > +               0,
> > > > > +       }
> > > > > +};
> > > > > +
> > > > > +struct mm_region *mem_map = apple_mem_map;
> > > > > +
> > > > > +int board_init(void)
> > > > > +{
> > > > > +       return 0;
> > > > > +}
> > > > > +
> > > > > +int dram_init(void)
> > > > > +{
> > > > > +       int index, node, ret;
> > > > > +       fdt_addr_t base;
> > > > > +       fdt_size_t size;
> > > > > +
> > > > > +       ret = fdtdec_setup_mem_size_base();
> > > > > +       if (ret)
> > > > > +               return ret;
> > > > > +
> > > > > +       /* Update RAM mapping. */
> > > >
> > > > nits: please remove the ending .
> > > >
> > > > > +       index = ARRAY_SIZE(apple_mem_map) - 3;
> > >
> > > This is error prone. Someone else updating apple_mem_map may create an
> > > incorrect index for us.
> >
> > I don't see a better way without introducing more complexity.
> >
> > > > > +       apple_mem_map[index].virt = gd->ram_base;
> > > > > +       apple_mem_map[index].phys = gd->ram_base;
> > > > > +       apple_mem_map[index].size = gd->ram_size;
> > > > > +
> > > > > +       node = fdt_path_offset(gd->fdt_blob, "/chosen/framebuffer");
> > > > > +       if (node < 0)
> > > > > +               return 0;
> > > > > +
> > > > > +       base = fdtdec_get_addr_size(gd->fdt_blob, node, "reg", &size);
> > > > > +       if (base == FDT_ADDR_T_NONE)
> > > > > +               return 0;
> > > > > +
> > > > > +       /* Add framebuffer mapping. */
> > > >
> > > > ditto
> > > >
> > > > > +       index = ARRAY_SIZE(apple_mem_map) - 2;
> > > > > +       apple_mem_map[index].virt = base;
> > > > > +       apple_mem_map[index].phys = base;
> > > > > +       apple_mem_map[index].size = size;
> > > > > +       apple_mem_map[index].attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL_NC) |
> > > > > +               PTE_BLOCK_INNER_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN;
> > > > > +
> > > > > +       return 0;
> > > > > +}
> > > > > +
> > > > > +int dram_init_banksize(void)
> > > > > +{
> > > > > +       return fdtdec_setup_memory_banksize();
> > > > > +}
> > > > > +
> > > > > +#define APPLE_WDT_BASE         0x23d2b0000ULL
> > > > > +
> > > > > +#define APPLE_WDT_SYS_CTL_ENABLE       BIT(2)
> > > > > +
> > > > > +typedef struct apple_wdt {
> > > > > +       u32     reserved0[3];
> > > > > +       u32     chip_ctl;
> > > > > +       u32     sys_tmr;
> > > > > +       u32     sys_cmp;
> > > > > +       u32     reserved1;
> > > > > +       u32     sys_ctl;
> > > > > +} apple_wdt_t;
> > > > > +
> > > > > +void reset_cpu(void)
> > > >
> > > > This looks like we should add a new sysreset driver for Apple Arm SoC.
> > > >
> > > > > +{
> > > > > +       apple_wdt_t *wdt = (apple_wdt_t *)APPLE_WDT_BASE;
> > > > > +
> > > > > +       writel(0, &wdt->sys_cmp);
> > > > > +       writel(APPLE_WDT_SYS_CTL_ENABLE, &wdt->sys_ctl);
> > > > > +
> > > > > +       while(1)
> > > > > +               wfi();
> > > > > +}
> > > > > +
> > > > > +extern long fw_dtb_pointer;
> > > > > +
> > > > > +void *board_fdt_blob_setup(void)
> > > > > +{
> > > > > +       return (void *)fw_dtb_pointer;
> > > > > +}
> > > > > +
> > > > > +ulong board_get_usable_ram_top(ulong total_size)
> > > > > +{
> > > > > +       /*
> > > > > +        * Top part of RAM is used by firmware for things like the
> > > > > +        * framebuffer.  This gives us plenty of room to play with.
> > > > > +        */
> > > > > +       return 0x980000000;
> > > > > +}
> > > > > diff --git a/arch/arm/mach-apple/lowlevel_init.S b/arch/arm/mach-apple/lowlevel_init.S
> > > > > new file mode 100644
> > > > > index 0000000000..0f5313163e
> > > > > --- /dev/null
> > > > > +++ b/arch/arm/mach-apple/lowlevel_init.S
> > > > > @@ -0,0 +1,16 @@
> > > > > +/* SPDX-License-Identifier: GPL-2.0+ */
> > > > > +/*
> > > > > + * (C) Copyright 2021 Mark Kettenis <kettenis@openbsd.org>
> > > > > + */
> > > > > +
> > > > > +.align 8
> > > > > +.global fw_dtb_pointer
> > > > > +fw_dtb_pointer:
> > > > > +       .quad   0
> > > >
> > > > Is this filled in by m1n1?
> > >
> > > Sorry I misread, so this is passed by m1n1 and filled in by U-Boot. I
> > > think we should stop using CONFIG_OF_BOARD, and for such case we
> > > should use CONFIG_OF_PRIOR_STAGE.
> >
> > Yes, CONFIG_OF_PRIOR_STAGE would work as well.  But Tom was talking
> > about removing that option in favour of CONFIG_OF_BOARD the other day.
>
> Yes.  I was even looking for some feedback from you, Bin, on converting
> some boards from CONFIG_OF_PRIOR_STAGE to CONFIG_OF_BOARD.  It seems
> like CONFIG_OF_PRIOR_STAGE is a subset of CONFIG_OF_BOARD, at the cost
> of possibly a few bytes.

Ah, I thought we wanted to do the other way around, by removing
CONFIG_OF_BOARD, and convert that to CONFIG_OF_PRIORI_STAGE?

Regards,
Bin

^ permalink raw reply	[flat|nested] 46+ messages in thread

* Re: [PATCH 1/5] arm: apple: Add initial support for Apple's M1 SoC
  2021-09-21 15:53           ` Bin Meng
@ 2021-09-21 16:04             ` Tom Rini
  2021-09-21 16:08             ` Mark Kettenis
  1 sibling, 0 replies; 46+ messages in thread
From: Tom Rini @ 2021-09-21 16:04 UTC (permalink / raw)
  To: Bin Meng
  Cc: Mark Kettenis, Mark Kettenis, U-Boot Mailing List,
	Bharat Kumar Reddy Gooty, Rayagonda Kokatanur, Oliver Graute,
	Bin Meng, Leo Yu-Chi Liang, Tianrui Wei, Stephan Gerhold,
	Padmarao Begari, Kishon Vijay Abraham I, Heinrich Schuchardt,
	Michael Walle, Masami Hiramatsu, Simon Glass, Asherah Connor,
	Wasim Khan, Michal Simek, Igor Opaniuk, Heiko Schocher, Ye Li,
	Stefan Roese, Vabhav Sharma, Marek Behún, Weijie Gao,
	AKASHI Takahiro, Andy Shevchenko, Pratyush Yadav

[-- Attachment #1: Type: text/plain, Size: 13860 bytes --]

On Tue, Sep 21, 2021 at 11:53:10PM +0800, Bin Meng wrote:
> On Tue, Sep 21, 2021 at 8:42 PM Tom Rini <trini@konsulko.com> wrote:
> >
> > On Sun, Sep 19, 2021 at 10:33:25PM +0200, Mark Kettenis wrote:
> > > > From: Bin Meng <bmeng.cn@gmail.com>
> > > > Date: Sun, 19 Sep 2021 09:17:07 +0800
> > > >
> > > > Hi Mark,
> > > >
> > > > On Sun, Sep 19, 2021 at 9:04 AM Bin Meng <bmeng.cn@gmail.com> wrote:
> > > > >
> > > > > Hi Mark,
> > > > >
> > > > > On Sat, Sep 18, 2021 at 9:55 PM Mark Kettenis <kettenis@openbsd.org> wrote:
> > > > > >
> > > > > > Add support for Apple's M1 SoC that is used in "Apple Silicon"
> > > > > > Macs.  This builds a basic U-Boot that can be used as a payload
> > > > > > for the m1n1 boot loader being developed by the Asahi Linux
> > > > > > project.
> > > > > >
> > > > > > Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
> > > > > > ---
> > > > > >  arch/arm/Kconfig                    |  22 ++++
> > > > > >  arch/arm/Makefile                   |   1 +
> > > > > >  arch/arm/mach-apple/Kconfig         |  18 ++++
> > > > > >  arch/arm/mach-apple/Makefile        |   4 +
> > > > > >  arch/arm/mach-apple/board.c         | 158 ++++++++++++++++++++++++++++
> > > > > >  arch/arm/mach-apple/lowlevel_init.S |  16 +++
> > > > > >  configs/apple_m1_defconfig          |  14 +++
> > > > > >  include/configs/apple.h             |  38 +++++++
> > > > > >  8 files changed, 271 insertions(+)
> > > > > >  create mode 100644 arch/arm/mach-apple/Kconfig
> > > > > >  create mode 100644 arch/arm/mach-apple/Makefile
> > > > > >  create mode 100644 arch/arm/mach-apple/board.c
> > > > > >  create mode 100644 arch/arm/mach-apple/lowlevel_init.S
> > > > > >  create mode 100644 configs/apple_m1_defconfig
> > > > > >  create mode 100644 include/configs/apple.h
> > > > > >
> > > > > > diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> > > > > > index b5bd3284cd..7cdea1f615 100644
> > > > > > --- a/arch/arm/Kconfig
> > > > > > +++ b/arch/arm/Kconfig
> > > > > > @@ -895,6 +895,26 @@ config ARCH_NEXELL
> > > > > >         select DM
> > > > > >         select GPIO_EXTRA_HEADER
> > > > > >
> > > > > > +config ARCH_APPLE
> > > > > > +       bool "Apple SoCs"
> > > > > > +       select ARM64
> > > > > > +       select LINUX_KERNEL_IMAGE_HEADER
> > > > > > +       select POSITION_INDEPENDENT
> > > > > > +       select BLK
> > > > > > +       select DM
> > > > > > +       select DM_KEYBOARD
> > > > > > +       select DM_SERIAL
> > > > > > +       select DM_USB
> > > > > > +       select DM_VIDEO
> > > > > > +       select CMD_USB
> > > > > > +       select MISC
> > > > > > +       select OF_CONTROL
> > > > > > +       select OF_BOARD
> > > > > > +       select USB
> > > > > > +       imply CMD_DM
> > > > > > +       imply CMD_GPT
> > > > > > +       imply DISTRO_DEFAULTS
> > > > > > +
> > > > > >  config ARCH_OWL
> > > > > >         bool "Actions Semi OWL SoCs"
> > > > > >         select DM
> > > > > > @@ -1932,6 +1952,8 @@ config ISW_ENTRY_ADDR
> > > > > >           image headers.
> > > > > >  endif
> > > > > >
> > > > > > +source "arch/arm/mach-apple/Kconfig"
> > > > > > +
> > > > > >  source "arch/arm/mach-aspeed/Kconfig"
> > > > > >
> > > > > >  source "arch/arm/mach-at91/Kconfig"
> > > > > > diff --git a/arch/arm/Makefile b/arch/arm/Makefile
> > > > > > index c68e598a67..44178c204b 100644
> > > > > > --- a/arch/arm/Makefile
> > > > > > +++ b/arch/arm/Makefile
> > > > > > @@ -51,6 +51,7 @@ PLATFORM_CPPFLAGS += $(arch-y) $(tune-y)
> > > > > >
> > > > > >  # Machine directory name.  This list is sorted alphanumerically
> > > > > >  # by CONFIG_* macro name.
> > > > > > +machine-$(CONFIG_ARCH_APPLE)           += apple
> > > > > >  machine-$(CONFIG_ARCH_ASPEED)          += aspeed
> > > > > >  machine-$(CONFIG_ARCH_AT91)            += at91
> > > > > >  machine-$(CONFIG_ARCH_BCM283X)         += bcm283x
> > > > > > diff --git a/arch/arm/mach-apple/Kconfig b/arch/arm/mach-apple/Kconfig
> > > > > > new file mode 100644
> > > > > > index 0000000000..66cab91b2a
> > > > > > --- /dev/null
> > > > > > +++ b/arch/arm/mach-apple/Kconfig
> > > > > > @@ -0,0 +1,18 @@
> > > > > > +if ARCH_APPLE
> > > > > > +
> > > > > > +config SYS_TEXT_BASE
> > > > > > +       default 0x00000000
> > > > > > +
> > > > > > +config SYS_CONFIG_NAME
> > > > > > +       default "apple"
> > > > > > +
> > > > > > +config SYS_SOC
> > > > > > +       default "m1"
> > > > > > +
> > > > > > +config SYS_MALLOC_LEN
> > > > > > +       default 0x4000000
> > > > > > +
> > > > > > +config SYS_MALLOC_F_LEN
> > > > > > +       default 0x4000
> > > > > > +
> > > > > > +endif
> > > > > > diff --git a/arch/arm/mach-apple/Makefile b/arch/arm/mach-apple/Makefile
> > > > > > new file mode 100644
> > > > > > index 0000000000..e74a8c9df1
> > > > > > --- /dev/null
> > > > > > +++ b/arch/arm/mach-apple/Makefile
> > > > > > @@ -0,0 +1,4 @@
> > > > > > +# SPDX-License-Identifier: GPL-2.0+
> > > > > > +
> > > > > > +obj-y += board.o
> > > > > > +obj-y += lowlevel_init.o
> > > > > > diff --git a/arch/arm/mach-apple/board.c b/arch/arm/mach-apple/board.c
> > > > > > new file mode 100644
> > > > > > index 0000000000..0c8b35292e
> > > > > > --- /dev/null
> > > > > > +++ b/arch/arm/mach-apple/board.c
> > > > > > @@ -0,0 +1,158 @@
> > > > > > +// SPDX-License-Identifier: GPL-2.0+
> > > > > > +/*
> > > > > > + * (C) Copyright 2021 Mark Kettenis <kettenis@openbsd.org>
> > > > > > + */
> > > > > > +
> > > > > > +#include <common.h>
> > > > > > +#include <efi_loader.h>
> > > > > > +
> > > > > > +#include <asm/armv8/mmu.h>
> > > > > > +#include <asm/global_data.h>
> > > > > > +#include <asm/io.h>
> > > > > > +#include <asm/system.h>
> > > > > > +
> > > > > > +DECLARE_GLOBAL_DATA_PTR;
> > > > > > +
> > > > > > +static struct mm_region apple_mem_map[] = {
> > > > > > +       {
> > > > > > +               /* I/O */
> > > > > > +               .virt = 0x200000000,
> > > > > > +               .phys = 0x200000000,
> > > > > > +               .size = 8UL * SZ_1G,
> > > > > > +               .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
> > > > > > +                        PTE_BLOCK_NON_SHARE |
> > > > > > +                        PTE_BLOCK_PXN | PTE_BLOCK_UXN
> > > > > > +       }, {
> > > > > > +               /* I/O */
> > > > > > +               .virt = 0x500000000,
> > > > > > +               .phys = 0x500000000,
> > > > > > +               .size = 2UL * SZ_1G,
> > > > > > +               .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
> > > > > > +                        PTE_BLOCK_NON_SHARE |
> > > > > > +                        PTE_BLOCK_PXN | PTE_BLOCK_UXN
> > > > > > +       }, {
> > > > > > +               /* I/O */
> > > > > > +               .virt = 0x680000000,
> > > > > > +               .phys = 0x680000000,
> > > > > > +               .size = SZ_512M,
> > > > > > +               .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
> > > > > > +                        PTE_BLOCK_NON_SHARE |
> > > > > > +                        PTE_BLOCK_PXN | PTE_BLOCK_UXN
> > > > > > +       }, {
> > > > > > +               /* PCIE */
> > > > > > +               .virt = 0x6a0000000,
> > > > > > +               .phys = 0x6a0000000,
> > > > > > +               .size = SZ_512M,
> > > > > > +               .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRE) |
> > > > > > +                        PTE_BLOCK_INNER_SHARE |
> > > > > > +                        PTE_BLOCK_PXN | PTE_BLOCK_UXN
> > > > > > +       }, {
> > > > > > +               /* PCIE */
> > > > > > +               .virt = 0x6c0000000,
> > > > > > +               .phys = 0x6c0000000,
> > > > > > +               .size = SZ_1G,
> > > > > > +               .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRE) |
> > > > > > +                        PTE_BLOCK_INNER_SHARE |
> > > > > > +                        PTE_BLOCK_PXN | PTE_BLOCK_UXN
> > > > > > +       }, {
> > > > > > +               /* RAM */
> > > > > > +               .virt = 0x800000000,
> > > > > > +               .phys = 0x800000000,
> > > > > > +               .size = 8UL * SZ_1G,
> > > > > > +               .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
> > > > > > +                        PTE_BLOCK_INNER_SHARE
> > > > > > +       }, {
> > > > > > +               /* Empty entry for framebuffer */
> > > > > > +               0,
> > > > > > +       }, {
> > > > > > +               /* List terminator */
> > > > > > +               0,
> > > > > > +       }
> > > > > > +};
> > > > > > +
> > > > > > +struct mm_region *mem_map = apple_mem_map;
> > > > > > +
> > > > > > +int board_init(void)
> > > > > > +{
> > > > > > +       return 0;
> > > > > > +}
> > > > > > +
> > > > > > +int dram_init(void)
> > > > > > +{
> > > > > > +       int index, node, ret;
> > > > > > +       fdt_addr_t base;
> > > > > > +       fdt_size_t size;
> > > > > > +
> > > > > > +       ret = fdtdec_setup_mem_size_base();
> > > > > > +       if (ret)
> > > > > > +               return ret;
> > > > > > +
> > > > > > +       /* Update RAM mapping. */
> > > > >
> > > > > nits: please remove the ending .
> > > > >
> > > > > > +       index = ARRAY_SIZE(apple_mem_map) - 3;
> > > >
> > > > This is error prone. Someone else updating apple_mem_map may create an
> > > > incorrect index for us.
> > >
> > > I don't see a better way without introducing more complexity.
> > >
> > > > > > +       apple_mem_map[index].virt = gd->ram_base;
> > > > > > +       apple_mem_map[index].phys = gd->ram_base;
> > > > > > +       apple_mem_map[index].size = gd->ram_size;
> > > > > > +
> > > > > > +       node = fdt_path_offset(gd->fdt_blob, "/chosen/framebuffer");
> > > > > > +       if (node < 0)
> > > > > > +               return 0;
> > > > > > +
> > > > > > +       base = fdtdec_get_addr_size(gd->fdt_blob, node, "reg", &size);
> > > > > > +       if (base == FDT_ADDR_T_NONE)
> > > > > > +               return 0;
> > > > > > +
> > > > > > +       /* Add framebuffer mapping. */
> > > > >
> > > > > ditto
> > > > >
> > > > > > +       index = ARRAY_SIZE(apple_mem_map) - 2;
> > > > > > +       apple_mem_map[index].virt = base;
> > > > > > +       apple_mem_map[index].phys = base;
> > > > > > +       apple_mem_map[index].size = size;
> > > > > > +       apple_mem_map[index].attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL_NC) |
> > > > > > +               PTE_BLOCK_INNER_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN;
> > > > > > +
> > > > > > +       return 0;
> > > > > > +}
> > > > > > +
> > > > > > +int dram_init_banksize(void)
> > > > > > +{
> > > > > > +       return fdtdec_setup_memory_banksize();
> > > > > > +}
> > > > > > +
> > > > > > +#define APPLE_WDT_BASE         0x23d2b0000ULL
> > > > > > +
> > > > > > +#define APPLE_WDT_SYS_CTL_ENABLE       BIT(2)
> > > > > > +
> > > > > > +typedef struct apple_wdt {
> > > > > > +       u32     reserved0[3];
> > > > > > +       u32     chip_ctl;
> > > > > > +       u32     sys_tmr;
> > > > > > +       u32     sys_cmp;
> > > > > > +       u32     reserved1;
> > > > > > +       u32     sys_ctl;
> > > > > > +} apple_wdt_t;
> > > > > > +
> > > > > > +void reset_cpu(void)
> > > > >
> > > > > This looks like we should add a new sysreset driver for Apple Arm SoC.
> > > > >
> > > > > > +{
> > > > > > +       apple_wdt_t *wdt = (apple_wdt_t *)APPLE_WDT_BASE;
> > > > > > +
> > > > > > +       writel(0, &wdt->sys_cmp);
> > > > > > +       writel(APPLE_WDT_SYS_CTL_ENABLE, &wdt->sys_ctl);
> > > > > > +
> > > > > > +       while(1)
> > > > > > +               wfi();
> > > > > > +}
> > > > > > +
> > > > > > +extern long fw_dtb_pointer;
> > > > > > +
> > > > > > +void *board_fdt_blob_setup(void)
> > > > > > +{
> > > > > > +       return (void *)fw_dtb_pointer;
> > > > > > +}
> > > > > > +
> > > > > > +ulong board_get_usable_ram_top(ulong total_size)
> > > > > > +{
> > > > > > +       /*
> > > > > > +        * Top part of RAM is used by firmware for things like the
> > > > > > +        * framebuffer.  This gives us plenty of room to play with.
> > > > > > +        */
> > > > > > +       return 0x980000000;
> > > > > > +}
> > > > > > diff --git a/arch/arm/mach-apple/lowlevel_init.S b/arch/arm/mach-apple/lowlevel_init.S
> > > > > > new file mode 100644
> > > > > > index 0000000000..0f5313163e
> > > > > > --- /dev/null
> > > > > > +++ b/arch/arm/mach-apple/lowlevel_init.S
> > > > > > @@ -0,0 +1,16 @@
> > > > > > +/* SPDX-License-Identifier: GPL-2.0+ */
> > > > > > +/*
> > > > > > + * (C) Copyright 2021 Mark Kettenis <kettenis@openbsd.org>
> > > > > > + */
> > > > > > +
> > > > > > +.align 8
> > > > > > +.global fw_dtb_pointer
> > > > > > +fw_dtb_pointer:
> > > > > > +       .quad   0
> > > > >
> > > > > Is this filled in by m1n1?
> > > >
> > > > Sorry I misread, so this is passed by m1n1 and filled in by U-Boot. I
> > > > think we should stop using CONFIG_OF_BOARD, and for such case we
> > > > should use CONFIG_OF_PRIOR_STAGE.
> > >
> > > Yes, CONFIG_OF_PRIOR_STAGE would work as well.  But Tom was talking
> > > about removing that option in favour of CONFIG_OF_BOARD the other day.
> >
> > Yes.  I was even looking for some feedback from you, Bin, on converting
> > some boards from CONFIG_OF_PRIOR_STAGE to CONFIG_OF_BOARD.  It seems
> > like CONFIG_OF_PRIOR_STAGE is a subset of CONFIG_OF_BOARD, at the cost
> > of possibly a few bytes.
> 
> Ah, I thought we wanted to do the other way around, by removing
> CONFIG_OF_BOARD, and convert that to CONFIG_OF_PRIORI_STAGE?

Maybe I had it backwards then?  Whichever one can be implemented as a
form of the other, and then we just keep one way of saying "we have the
DT passed in to us".

-- 
Tom

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 659 bytes --]

^ permalink raw reply	[flat|nested] 46+ messages in thread

* Re: [PATCH 1/5] arm: apple: Add initial support for Apple's M1 SoC
  2021-09-21 15:53           ` Bin Meng
  2021-09-21 16:04             ` Tom Rini
@ 2021-09-21 16:08             ` Mark Kettenis
  2021-09-25 13:27               ` Simon Glass
  1 sibling, 1 reply; 46+ messages in thread
From: Mark Kettenis @ 2021-09-21 16:08 UTC (permalink / raw)
  To: Bin Meng
  Cc: trini, kettenis, u-boot, bharat.gooty, rayagonda.kokatanur,
	oliver.graute, bin.meng, ycliang, tianrui-wei, stephan,
	padmarao.begari, kishon, xypron.glpk, michael, masami.hiramatsu,
	sjg, ashe, wasim.khan, michal.simek, igor.opaniuk, hs, ye.li, sr,
	vabhav.sharma, marek.behun, weijie.gao, takahiro.akashi,
	andriy.shevchenko, p.yadav

> From: Bin Meng <bmeng.cn@gmail.com>
> Date: Tue, 21 Sep 2021 23:53:10 +0800
> 
> On Tue, Sep 21, 2021 at 8:42 PM Tom Rini <trini@konsulko.com> wrote:
> >
> > On Sun, Sep 19, 2021 at 10:33:25PM +0200, Mark Kettenis wrote:
> > > > From: Bin Meng <bmeng.cn@gmail.com>
> > > > Date: Sun, 19 Sep 2021 09:17:07 +0800
> > > >
> > > > Hi Mark,
> > > >
> > > > On Sun, Sep 19, 2021 at 9:04 AM Bin Meng <bmeng.cn@gmail.com> wrote:
> > > > >
> > > > > Hi Mark,
> > > > >
> > > > > On Sat, Sep 18, 2021 at 9:55 PM Mark Kettenis <kettenis@openbsd.org> wrote:
> > > > > >
> > > > > > Add support for Apple's M1 SoC that is used in "Apple Silicon"
> > > > > > Macs.  This builds a basic U-Boot that can be used as a payload
> > > > > > for the m1n1 boot loader being developed by the Asahi Linux
> > > > > > project.
> > > > > >
> > > > > > Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
> > > > > > ---
> > > > > >  arch/arm/Kconfig                    |  22 ++++
> > > > > >  arch/arm/Makefile                   |   1 +
> > > > > >  arch/arm/mach-apple/Kconfig         |  18 ++++
> > > > > >  arch/arm/mach-apple/Makefile        |   4 +
> > > > > >  arch/arm/mach-apple/board.c         | 158 ++++++++++++++++++++++++++++
> > > > > >  arch/arm/mach-apple/lowlevel_init.S |  16 +++
> > > > > >  configs/apple_m1_defconfig          |  14 +++
> > > > > >  include/configs/apple.h             |  38 +++++++
> > > > > >  8 files changed, 271 insertions(+)
> > > > > >  create mode 100644 arch/arm/mach-apple/Kconfig
> > > > > >  create mode 100644 arch/arm/mach-apple/Makefile
> > > > > >  create mode 100644 arch/arm/mach-apple/board.c
> > > > > >  create mode 100644 arch/arm/mach-apple/lowlevel_init.S
> > > > > >  create mode 100644 configs/apple_m1_defconfig
> > > > > >  create mode 100644 include/configs/apple.h
> > > > > >
> > > > > > diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> > > > > > index b5bd3284cd..7cdea1f615 100644
> > > > > > --- a/arch/arm/Kconfig
> > > > > > +++ b/arch/arm/Kconfig
> > > > > > @@ -895,6 +895,26 @@ config ARCH_NEXELL
> > > > > >         select DM
> > > > > >         select GPIO_EXTRA_HEADER
> > > > > >
> > > > > > +config ARCH_APPLE
> > > > > > +       bool "Apple SoCs"
> > > > > > +       select ARM64
> > > > > > +       select LINUX_KERNEL_IMAGE_HEADER
> > > > > > +       select POSITION_INDEPENDENT
> > > > > > +       select BLK
> > > > > > +       select DM
> > > > > > +       select DM_KEYBOARD
> > > > > > +       select DM_SERIAL
> > > > > > +       select DM_USB
> > > > > > +       select DM_VIDEO
> > > > > > +       select CMD_USB
> > > > > > +       select MISC
> > > > > > +       select OF_CONTROL
> > > > > > +       select OF_BOARD
> > > > > > +       select USB
> > > > > > +       imply CMD_DM
> > > > > > +       imply CMD_GPT
> > > > > > +       imply DISTRO_DEFAULTS
> > > > > > +
> > > > > >  config ARCH_OWL
> > > > > >         bool "Actions Semi OWL SoCs"
> > > > > >         select DM
> > > > > > @@ -1932,6 +1952,8 @@ config ISW_ENTRY_ADDR
> > > > > >           image headers.
> > > > > >  endif
> > > > > >
> > > > > > +source "arch/arm/mach-apple/Kconfig"
> > > > > > +
> > > > > >  source "arch/arm/mach-aspeed/Kconfig"
> > > > > >
> > > > > >  source "arch/arm/mach-at91/Kconfig"
> > > > > > diff --git a/arch/arm/Makefile b/arch/arm/Makefile
> > > > > > index c68e598a67..44178c204b 100644
> > > > > > --- a/arch/arm/Makefile
> > > > > > +++ b/arch/arm/Makefile
> > > > > > @@ -51,6 +51,7 @@ PLATFORM_CPPFLAGS += $(arch-y) $(tune-y)
> > > > > >
> > > > > >  # Machine directory name.  This list is sorted alphanumerically
> > > > > >  # by CONFIG_* macro name.
> > > > > > +machine-$(CONFIG_ARCH_APPLE)           += apple
> > > > > >  machine-$(CONFIG_ARCH_ASPEED)          += aspeed
> > > > > >  machine-$(CONFIG_ARCH_AT91)            += at91
> > > > > >  machine-$(CONFIG_ARCH_BCM283X)         += bcm283x
> > > > > > diff --git a/arch/arm/mach-apple/Kconfig b/arch/arm/mach-apple/Kconfig
> > > > > > new file mode 100644
> > > > > > index 0000000000..66cab91b2a
> > > > > > --- /dev/null
> > > > > > +++ b/arch/arm/mach-apple/Kconfig
> > > > > > @@ -0,0 +1,18 @@
> > > > > > +if ARCH_APPLE
> > > > > > +
> > > > > > +config SYS_TEXT_BASE
> > > > > > +       default 0x00000000
> > > > > > +
> > > > > > +config SYS_CONFIG_NAME
> > > > > > +       default "apple"
> > > > > > +
> > > > > > +config SYS_SOC
> > > > > > +       default "m1"
> > > > > > +
> > > > > > +config SYS_MALLOC_LEN
> > > > > > +       default 0x4000000
> > > > > > +
> > > > > > +config SYS_MALLOC_F_LEN
> > > > > > +       default 0x4000
> > > > > > +
> > > > > > +endif
> > > > > > diff --git a/arch/arm/mach-apple/Makefile b/arch/arm/mach-apple/Makefile
> > > > > > new file mode 100644
> > > > > > index 0000000000..e74a8c9df1
> > > > > > --- /dev/null
> > > > > > +++ b/arch/arm/mach-apple/Makefile
> > > > > > @@ -0,0 +1,4 @@
> > > > > > +# SPDX-License-Identifier: GPL-2.0+
> > > > > > +
> > > > > > +obj-y += board.o
> > > > > > +obj-y += lowlevel_init.o
> > > > > > diff --git a/arch/arm/mach-apple/board.c b/arch/arm/mach-apple/board.c
> > > > > > new file mode 100644
> > > > > > index 0000000000..0c8b35292e
> > > > > > --- /dev/null
> > > > > > +++ b/arch/arm/mach-apple/board.c
> > > > > > @@ -0,0 +1,158 @@
> > > > > > +// SPDX-License-Identifier: GPL-2.0+
> > > > > > +/*
> > > > > > + * (C) Copyright 2021 Mark Kettenis <kettenis@openbsd.org>
> > > > > > + */
> > > > > > +
> > > > > > +#include <common.h>
> > > > > > +#include <efi_loader.h>
> > > > > > +
> > > > > > +#include <asm/armv8/mmu.h>
> > > > > > +#include <asm/global_data.h>
> > > > > > +#include <asm/io.h>
> > > > > > +#include <asm/system.h>
> > > > > > +
> > > > > > +DECLARE_GLOBAL_DATA_PTR;
> > > > > > +
> > > > > > +static struct mm_region apple_mem_map[] = {
> > > > > > +       {
> > > > > > +               /* I/O */
> > > > > > +               .virt = 0x200000000,
> > > > > > +               .phys = 0x200000000,
> > > > > > +               .size = 8UL * SZ_1G,
> > > > > > +               .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
> > > > > > +                        PTE_BLOCK_NON_SHARE |
> > > > > > +                        PTE_BLOCK_PXN | PTE_BLOCK_UXN
> > > > > > +       }, {
> > > > > > +               /* I/O */
> > > > > > +               .virt = 0x500000000,
> > > > > > +               .phys = 0x500000000,
> > > > > > +               .size = 2UL * SZ_1G,
> > > > > > +               .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
> > > > > > +                        PTE_BLOCK_NON_SHARE |
> > > > > > +                        PTE_BLOCK_PXN | PTE_BLOCK_UXN
> > > > > > +       }, {
> > > > > > +               /* I/O */
> > > > > > +               .virt = 0x680000000,
> > > > > > +               .phys = 0x680000000,
> > > > > > +               .size = SZ_512M,
> > > > > > +               .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
> > > > > > +                        PTE_BLOCK_NON_SHARE |
> > > > > > +                        PTE_BLOCK_PXN | PTE_BLOCK_UXN
> > > > > > +       }, {
> > > > > > +               /* PCIE */
> > > > > > +               .virt = 0x6a0000000,
> > > > > > +               .phys = 0x6a0000000,
> > > > > > +               .size = SZ_512M,
> > > > > > +               .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRE) |
> > > > > > +                        PTE_BLOCK_INNER_SHARE |
> > > > > > +                        PTE_BLOCK_PXN | PTE_BLOCK_UXN
> > > > > > +       }, {
> > > > > > +               /* PCIE */
> > > > > > +               .virt = 0x6c0000000,
> > > > > > +               .phys = 0x6c0000000,
> > > > > > +               .size = SZ_1G,
> > > > > > +               .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRE) |
> > > > > > +                        PTE_BLOCK_INNER_SHARE |
> > > > > > +                        PTE_BLOCK_PXN | PTE_BLOCK_UXN
> > > > > > +       }, {
> > > > > > +               /* RAM */
> > > > > > +               .virt = 0x800000000,
> > > > > > +               .phys = 0x800000000,
> > > > > > +               .size = 8UL * SZ_1G,
> > > > > > +               .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
> > > > > > +                        PTE_BLOCK_INNER_SHARE
> > > > > > +       }, {
> > > > > > +               /* Empty entry for framebuffer */
> > > > > > +               0,
> > > > > > +       }, {
> > > > > > +               /* List terminator */
> > > > > > +               0,
> > > > > > +       }
> > > > > > +};
> > > > > > +
> > > > > > +struct mm_region *mem_map = apple_mem_map;
> > > > > > +
> > > > > > +int board_init(void)
> > > > > > +{
> > > > > > +       return 0;
> > > > > > +}
> > > > > > +
> > > > > > +int dram_init(void)
> > > > > > +{
> > > > > > +       int index, node, ret;
> > > > > > +       fdt_addr_t base;
> > > > > > +       fdt_size_t size;
> > > > > > +
> > > > > > +       ret = fdtdec_setup_mem_size_base();
> > > > > > +       if (ret)
> > > > > > +               return ret;
> > > > > > +
> > > > > > +       /* Update RAM mapping. */
> > > > >
> > > > > nits: please remove the ending .
> > > > >
> > > > > > +       index = ARRAY_SIZE(apple_mem_map) - 3;
> > > >
> > > > This is error prone. Someone else updating apple_mem_map may create an
> > > > incorrect index for us.
> > >
> > > I don't see a better way without introducing more complexity.
> > >
> > > > > > +       apple_mem_map[index].virt = gd->ram_base;
> > > > > > +       apple_mem_map[index].phys = gd->ram_base;
> > > > > > +       apple_mem_map[index].size = gd->ram_size;
> > > > > > +
> > > > > > +       node = fdt_path_offset(gd->fdt_blob, "/chosen/framebuffer");
> > > > > > +       if (node < 0)
> > > > > > +               return 0;
> > > > > > +
> > > > > > +       base = fdtdec_get_addr_size(gd->fdt_blob, node, "reg", &size);
> > > > > > +       if (base == FDT_ADDR_T_NONE)
> > > > > > +               return 0;
> > > > > > +
> > > > > > +       /* Add framebuffer mapping. */
> > > > >
> > > > > ditto
> > > > >
> > > > > > +       index = ARRAY_SIZE(apple_mem_map) - 2;
> > > > > > +       apple_mem_map[index].virt = base;
> > > > > > +       apple_mem_map[index].phys = base;
> > > > > > +       apple_mem_map[index].size = size;
> > > > > > +       apple_mem_map[index].attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL_NC) |
> > > > > > +               PTE_BLOCK_INNER_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN;
> > > > > > +
> > > > > > +       return 0;
> > > > > > +}
> > > > > > +
> > > > > > +int dram_init_banksize(void)
> > > > > > +{
> > > > > > +       return fdtdec_setup_memory_banksize();
> > > > > > +}
> > > > > > +
> > > > > > +#define APPLE_WDT_BASE         0x23d2b0000ULL
> > > > > > +
> > > > > > +#define APPLE_WDT_SYS_CTL_ENABLE       BIT(2)
> > > > > > +
> > > > > > +typedef struct apple_wdt {
> > > > > > +       u32     reserved0[3];
> > > > > > +       u32     chip_ctl;
> > > > > > +       u32     sys_tmr;
> > > > > > +       u32     sys_cmp;
> > > > > > +       u32     reserved1;
> > > > > > +       u32     sys_ctl;
> > > > > > +} apple_wdt_t;
> > > > > > +
> > > > > > +void reset_cpu(void)
> > > > >
> > > > > This looks like we should add a new sysreset driver for Apple Arm SoC.
> > > > >
> > > > > > +{
> > > > > > +       apple_wdt_t *wdt = (apple_wdt_t *)APPLE_WDT_BASE;
> > > > > > +
> > > > > > +       writel(0, &wdt->sys_cmp);
> > > > > > +       writel(APPLE_WDT_SYS_CTL_ENABLE, &wdt->sys_ctl);
> > > > > > +
> > > > > > +       while(1)
> > > > > > +               wfi();
> > > > > > +}
> > > > > > +
> > > > > > +extern long fw_dtb_pointer;
> > > > > > +
> > > > > > +void *board_fdt_blob_setup(void)
> > > > > > +{
> > > > > > +       return (void *)fw_dtb_pointer;
> > > > > > +}
> > > > > > +
> > > > > > +ulong board_get_usable_ram_top(ulong total_size)
> > > > > > +{
> > > > > > +       /*
> > > > > > +        * Top part of RAM is used by firmware for things like the
> > > > > > +        * framebuffer.  This gives us plenty of room to play with.
> > > > > > +        */
> > > > > > +       return 0x980000000;
> > > > > > +}
> > > > > > diff --git a/arch/arm/mach-apple/lowlevel_init.S b/arch/arm/mach-apple/lowlevel_init.S
> > > > > > new file mode 100644
> > > > > > index 0000000000..0f5313163e
> > > > > > --- /dev/null
> > > > > > +++ b/arch/arm/mach-apple/lowlevel_init.S
> > > > > > @@ -0,0 +1,16 @@
> > > > > > +/* SPDX-License-Identifier: GPL-2.0+ */
> > > > > > +/*
> > > > > > + * (C) Copyright 2021 Mark Kettenis <kettenis@openbsd.org>
> > > > > > + */
> > > > > > +
> > > > > > +.align 8
> > > > > > +.global fw_dtb_pointer
> > > > > > +fw_dtb_pointer:
> > > > > > +       .quad   0
> > > > >
> > > > > Is this filled in by m1n1?
> > > >
> > > > Sorry I misread, so this is passed by m1n1 and filled in by U-Boot. I
> > > > think we should stop using CONFIG_OF_BOARD, and for such case we
> > > > should use CONFIG_OF_PRIOR_STAGE.
> > >
> > > Yes, CONFIG_OF_PRIOR_STAGE would work as well.  But Tom was talking
> > > about removing that option in favour of CONFIG_OF_BOARD the other day.
> >
> > Yes.  I was even looking for some feedback from you, Bin, on converting
> > some boards from CONFIG_OF_PRIOR_STAGE to CONFIG_OF_BOARD.  It seems
> > like CONFIG_OF_PRIOR_STAGE is a subset of CONFIG_OF_BOARD, at the cost
> > of possibly a few bytes.
> 
> Ah, I thought we wanted to do the other way around, by removing
> CONFIG_OF_BOARD, and convert that to CONFIG_OF_PRIORI_STAGE?

I must say that I see some logic in keeping both, where
CONFIG_OF_BOARD indicates that the device tree is somehow stored on
the board and U-Boot has to run some code to fetch it, and
CONFIG_OF_PRIOR_STAGE is used when the device tree is provided by
firmware that runs before U-Boot.

In that case I obviously should use CONFIG_OF_PRIOR_STAGE here.

^ permalink raw reply	[flat|nested] 46+ messages in thread

* Re: [PATCH 0/5] Apple M1 Support
  2021-09-18 13:54 [PATCH 0/5] Apple M1 Support Mark Kettenis
                   ` (4 preceding siblings ...)
  2021-09-18 13:54 ` [PATCH 5/5] doc: board: apple: Add Apple M1 documentation Mark Kettenis
@ 2021-09-25  1:20 ` Simon Glass
  2021-09-25  8:11   ` Mark Kettenis
  5 siblings, 1 reply; 46+ messages in thread
From: Simon Glass @ 2021-09-25  1:20 UTC (permalink / raw)
  To: Mark Kettenis
  Cc: U-Boot Mailing List, Oliver Graute, Michael Walle, Anup Patel,
	Jonathan Balkind, Tianrui Wei, Padmarao Begari,
	Kishon Vijay Abraham I, Stephan Gerhold, Heinrich Schuchardt,
	Bin Meng, Asherah Connor, Michal Simek, Wasim Khan, Ye Li,
	Igor Opaniuk, Stefan Roese, Minkyu Kang, AKASHI Takahiro,
	Weijie Gao, Vabhav Sharma, Andy Shevchenko, Pratyush Yadav

Hi Mark,

On Sat, 18 Sept 2021 at 07:54, Mark Kettenis <kettenis@openbsd.org> wrote:
>
> This series adds basic support for Apple's M1 SoC to U-Boot.
> This builds a basic U-Boot that can be used as a payload
> for the m1n1 boot loader being developed by the Asahi Linux
> project.
>
> The goal here is to privide an UEFI interface on these machines that

provide

> allows booting various open source OSes.  This initial series provides
> support for the serial port, framebuffer and the USB 3.1 Type-C ports.
> It can boot a support OS (e.g. OpenBSD/arm64) from a USB disk.
>
> Mark Kettenis (5):
>   arm: apple: Add initial support for Apple's M1 SoC
>   serial: s5p: Add Apple M1 support
>   misc: Add Apple DART driver
>   arm: dts: apple: Add preliminary device trees
>   doc: board: apple: Add Apple M1 documentation
>
>  arch/arm/Kconfig                              |  22 +
>  arch/arm/Makefile                             |   1 +
>  arch/arm/dts/t8103-j274.dts                   | 135 +++++
>  arch/arm/dts/t8103-j293.dts                   |  97 ++++
>  arch/arm/dts/t8103.dtsi                       | 506 ++++++++++++++++++
>  arch/arm/include/asm/arch-m1/clk.h            |  11 +
>  arch/arm/include/asm/arch-m1/uart.h           |  41 ++
>  arch/arm/mach-apple/Kconfig                   |  18 +
>  arch/arm/mach-apple/Makefile                  |   4 +
>  arch/arm/mach-apple/board.c                   | 163 ++++++
>  arch/arm/mach-apple/lowlevel_init.S           |  16 +
>  configs/apple_m1_defconfig                    |  14 +
>  doc/board/apple/index.rst                     |   9 +
>  doc/board/apple/m1.rst                        |  54 ++
>  doc/board/index.rst                           |   1 +
>  drivers/misc/Kconfig                          |   7 +
>  drivers/misc/Makefile                         |   1 +
>  drivers/misc/apple_dart.c                     | 171 ++++++
>  drivers/serial/Kconfig                        |   2 +-
>  drivers/serial/serial_s5p.c                   |  22 +
>  include/configs/apple.h                       |  38 ++
>  .../interrupt-controller/apple-aic.h          |  15 +
>  include/dt-bindings/pinctrl/apple.h           |  13 +
>  include/dt-bindings/spmi/spmi.h               |  10 +
>  24 files changed, 1370 insertions(+), 1 deletion(-)
>  create mode 100644 arch/arm/dts/t8103-j274.dts
>  create mode 100644 arch/arm/dts/t8103-j293.dts
>  create mode 100644 arch/arm/dts/t8103.dtsi
>  create mode 100644 arch/arm/include/asm/arch-m1/clk.h
>  create mode 100644 arch/arm/include/asm/arch-m1/uart.h
>  create mode 100644 arch/arm/mach-apple/Kconfig
>  create mode 100644 arch/arm/mach-apple/Makefile
>  create mode 100644 arch/arm/mach-apple/board.c
>  create mode 100644 arch/arm/mach-apple/lowlevel_init.S
>  create mode 100644 configs/apple_m1_defconfig
>  create mode 100644 doc/board/apple/index.rst
>  create mode 100644 doc/board/apple/m1.rst
>  create mode 100644 drivers/misc/apple_dart.c
>  create mode 100644 include/configs/apple.h
>  create mode 100644 include/dt-bindings/interrupt-controller/apple-aic.h
>  create mode 100644 include/dt-bindings/pinctrl/apple.h
>  create mode 100644 include/dt-bindings/spmi/spmi.h
>
> --
> 2.33.0
>

I gave this a whirl on a Macbook Air A2337 and needed the patch below
to build the devicetree files. Sorry the formatting is broken.

Also when booting I get this:

...
Preparing to boot kernel at 0x808200000 with fdt at 0x8082e8000
Valid payload found
Preparing to run next stage at 0x808200000...
MMU: shutting down...
MMU: shutdown successful, clearing caches


Then the display clears and it hangs. If I try the J274 devicetree it
just reboots at that point.

What should I expect? I was hoping for console output as I don't have
serial connected. I don't have a suitable serial cable, and the USB
gadget mode did not result in a ttyACM0 device appearing.

Regards,
Simon



Subject: [PATCH] Fix up devicetree

Get these building.

Signed-off-by: Simon Glass <sjg@chromium.org>
---

 arch/arm/dts/Makefile      |  2 ++
 configs/apple_m1_defconfig | 11 +++++------
 2 files changed, 7 insertions(+), 6 deletions(-)

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index fc16a57e60b..0c40947cc33 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -1130,6 +1130,8 @@ dtb-$(CONFIG_TARGET_IMX8MM_CL_IOT_GATE) +=
imx8mm-cl-iot-gate.dtb

 dtb-$(CONFIG_TARGET_EA_LPC3250DEVKITV2) += lpc3250-ea3250.dtb

+dtb-$(CONFIG_ARCH_APPLE) += t8103-j274.dtb t8103-j293.dtb
+
 targets += $(dtb-y)

 # Add any required device tree compiler flags here
diff --git a/configs/apple_m1_defconfig b/configs/apple_m1_defconfig
index a7ae15576bf..7712a0bac52 100644
--- a/configs/apple_m1_defconfig
+++ b/configs/apple_m1_defconfig
@@ -1,14 +1,13 @@
 CONFIG_ARM=y
 CONFIG_ARCH_APPLE=y
+CONFIG_DEFAULT_DEVICE_TREE="t8103-j293"
+CONFIG_USE_PREBOOT=y
 # CONFIG_DISPLAY_CPUINFO is not set
-# CONFIG_MMC is not set
-# CONFIG_NET is not set
-CONFIG_VIDEO_SIMPLE=y
 CONFIG_DISPLAY_BOARDINFO_LATE=y
+# CONFIG_NET is not set
+# CONFIG_MMC is not set
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_KEYBOARD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USE_PREBOOT=y
-CONFIG_PREBOOT="usb start"
+CONFIG_VIDEO_SIMPLE=y
 # CONFIG_GENERATE_SMBIOS_TABLE is not set
-- 
2.25.1

^ permalink raw reply related	[flat|nested] 46+ messages in thread

* Re: [PATCH 0/5] Apple M1 Support
  2021-09-25  1:20 ` [PATCH 0/5] Apple M1 Support Simon Glass
@ 2021-09-25  8:11   ` Mark Kettenis
  2021-09-25 13:27     ` Simon Glass
  0 siblings, 1 reply; 46+ messages in thread
From: Mark Kettenis @ 2021-09-25  8:11 UTC (permalink / raw)
  To: Simon Glass
  Cc: kettenis, u-boot, oliver.graute, michael, anup.patel, jbalkind,
	tianrui-wei, padmarao.begari, kishon, stephan, xypron.glpk,
	bin.meng, ashe, michal.simek, wasim.khan, ye.li, igor.opaniuk,
	sr, mk7.kang, takahiro.akashi, weijie.gao, vabhav.sharma,
	andriy.shevchenko, p.yadav

> From: Simon Glass <sjg@chromium.org>
> Date: Fri, 24 Sep 2021 19:20:32 -0600
> 
> Hi Mark,
> 
> On Sat, 18 Sept 2021 at 07:54, Mark Kettenis <kettenis@openbsd.org> wrote:
> >
> > This series adds basic support for Apple's M1 SoC to U-Boot.
> > This builds a basic U-Boot that can be used as a payload
> > for the m1n1 boot loader being developed by the Asahi Linux
> > project.
> >
> > The goal here is to privide an UEFI interface on these machines that
> 
> provide
> 
> > allows booting various open source OSes.  This initial series provides
> > support for the serial port, framebuffer and the USB 3.1 Type-C ports.
> > It can boot a support OS (e.g. OpenBSD/arm64) from a USB disk.
> >
> > Mark Kettenis (5):
> >   arm: apple: Add initial support for Apple's M1 SoC
> >   serial: s5p: Add Apple M1 support
> >   misc: Add Apple DART driver
> >   arm: dts: apple: Add preliminary device trees
> >   doc: board: apple: Add Apple M1 documentation
> >
> >  arch/arm/Kconfig                              |  22 +
> >  arch/arm/Makefile                             |   1 +
> >  arch/arm/dts/t8103-j274.dts                   | 135 +++++
> >  arch/arm/dts/t8103-j293.dts                   |  97 ++++
> >  arch/arm/dts/t8103.dtsi                       | 506 ++++++++++++++++++
> >  arch/arm/include/asm/arch-m1/clk.h            |  11 +
> >  arch/arm/include/asm/arch-m1/uart.h           |  41 ++
> >  arch/arm/mach-apple/Kconfig                   |  18 +
> >  arch/arm/mach-apple/Makefile                  |   4 +
> >  arch/arm/mach-apple/board.c                   | 163 ++++++
> >  arch/arm/mach-apple/lowlevel_init.S           |  16 +
> >  configs/apple_m1_defconfig                    |  14 +
> >  doc/board/apple/index.rst                     |   9 +
> >  doc/board/apple/m1.rst                        |  54 ++
> >  doc/board/index.rst                           |   1 +
> >  drivers/misc/Kconfig                          |   7 +
> >  drivers/misc/Makefile                         |   1 +
> >  drivers/misc/apple_dart.c                     | 171 ++++++
> >  drivers/serial/Kconfig                        |   2 +-
> >  drivers/serial/serial_s5p.c                   |  22 +
> >  include/configs/apple.h                       |  38 ++
> >  .../interrupt-controller/apple-aic.h          |  15 +
> >  include/dt-bindings/pinctrl/apple.h           |  13 +
> >  include/dt-bindings/spmi/spmi.h               |  10 +
> >  24 files changed, 1370 insertions(+), 1 deletion(-)
> >  create mode 100644 arch/arm/dts/t8103-j274.dts
> >  create mode 100644 arch/arm/dts/t8103-j293.dts
> >  create mode 100644 arch/arm/dts/t8103.dtsi
> >  create mode 100644 arch/arm/include/asm/arch-m1/clk.h
> >  create mode 100644 arch/arm/include/asm/arch-m1/uart.h
> >  create mode 100644 arch/arm/mach-apple/Kconfig
> >  create mode 100644 arch/arm/mach-apple/Makefile
> >  create mode 100644 arch/arm/mach-apple/board.c
> >  create mode 100644 arch/arm/mach-apple/lowlevel_init.S
> >  create mode 100644 configs/apple_m1_defconfig
> >  create mode 100644 doc/board/apple/index.rst
> >  create mode 100644 doc/board/apple/m1.rst
> >  create mode 100644 drivers/misc/apple_dart.c
> >  create mode 100644 include/configs/apple.h
> >  create mode 100644 include/dt-bindings/interrupt-controller/apple-aic.h
> >  create mode 100644 include/dt-bindings/pinctrl/apple.h
> >  create mode 100644 include/dt-bindings/spmi/spmi.h
> >
> > --
> > 2.33.0
> >
> 
> I gave this a whirl on a Macbook Air A2337 and needed the patch below
> to build the devicetree files. Sorry the formatting is broken.
> 
> Also when booting I get this:
> 
> ...
> Preparing to boot kernel at 0x808200000 with fdt at 0x8082e8000
> Valid payload found
> Preparing to run next stage at 0x808200000...
> MMU: shutting down...
> MMU: shutdown successful, clearing caches
> 
> 
> Then the display clears and it hangs. If I try the J274 devicetree it
> just reboots at that point.
> 
> What should I expect? I was hoping for console output as I don't have
> serial connected. I don't have a suitable serial cable, and the USB
> gadget mode did not result in a ttyACM0 device appearing.

For framebuffer support you also need the "30bpp framebuffer support"
series I posted earlier:

https://patchwork.ozlabs.org/project/uboot/list/?series=262617

With that your should get the usual U-Boot output on the screen.  I've
not tested the Air, but it should work there.

I'll probably post a v2 of that series this weekend as I fixed the EFI
GOP support with the help of Heinrich.  But that shouldn't matter for
U-Boot itself.

Regarding the device tree, I was afraid that setting
CONFIG_DEFAULT_DEVICE_TREE would make the distroboot commands try to
load a device tree from disk before loading the EFI bootloader, but it
looks I was mistaken there.  It still is a little bit pointless to
build the device tree and a u-boot.bin that includes it, but if that
makes you happier, I'll add it to the series.

Cheers,

Mark

> Subject: [PATCH] Fix up devicetree
> 
> Get these building.
> 
> Signed-off-by: Simon Glass <sjg@chromium.org>
> ---
> 
>  arch/arm/dts/Makefile      |  2 ++
>  configs/apple_m1_defconfig | 11 +++++------
>  2 files changed, 7 insertions(+), 6 deletions(-)
> 
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index fc16a57e60b..0c40947cc33 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -1130,6 +1130,8 @@ dtb-$(CONFIG_TARGET_IMX8MM_CL_IOT_GATE) +=
> imx8mm-cl-iot-gate.dtb
> 
>  dtb-$(CONFIG_TARGET_EA_LPC3250DEVKITV2) += lpc3250-ea3250.dtb
> 
> +dtb-$(CONFIG_ARCH_APPLE) += t8103-j274.dtb t8103-j293.dtb
> +
>  targets += $(dtb-y)
> 
>  # Add any required device tree compiler flags here
> diff --git a/configs/apple_m1_defconfig b/configs/apple_m1_defconfig
> index a7ae15576bf..7712a0bac52 100644
> --- a/configs/apple_m1_defconfig
> +++ b/configs/apple_m1_defconfig
> @@ -1,14 +1,13 @@
>  CONFIG_ARM=y
>  CONFIG_ARCH_APPLE=y
> +CONFIG_DEFAULT_DEVICE_TREE="t8103-j293"
> +CONFIG_USE_PREBOOT=y
>  # CONFIG_DISPLAY_CPUINFO is not set
> -# CONFIG_MMC is not set
> -# CONFIG_NET is not set
> -CONFIG_VIDEO_SIMPLE=y
>  CONFIG_DISPLAY_BOARDINFO_LATE=y
> +# CONFIG_NET is not set
> +# CONFIG_MMC is not set
>  CONFIG_USB_XHCI_HCD=y
>  CONFIG_USB_XHCI_DWC3=y
>  CONFIG_USB_KEYBOARD=y
> -CONFIG_USB_STORAGE=y
> -CONFIG_USE_PREBOOT=y
> -CONFIG_PREBOOT="usb start"
> +CONFIG_VIDEO_SIMPLE=y
>  # CONFIG_GENERATE_SMBIOS_TABLE is not set
> -- 
> 2.25.1
> 

^ permalink raw reply	[flat|nested] 46+ messages in thread

* Re: [PATCH 0/5] Apple M1 Support
  2021-09-25  8:11   ` Mark Kettenis
@ 2021-09-25 13:27     ` Simon Glass
  2021-09-25 13:52       ` Mark Kettenis
  0 siblings, 1 reply; 46+ messages in thread
From: Simon Glass @ 2021-09-25 13:27 UTC (permalink / raw)
  To: Mark Kettenis
  Cc: Mark Kettenis, U-Boot Mailing List, Oliver Graute, Michael Walle,
	Anup Patel, Jonathan Balkind, Tianrui Wei, Padmarao Begari,
	Kishon Vijay Abraham I, Stephan Gerhold, Heinrich Schuchardt,
	Bin Meng, Asherah Connor, Michal Simek, Wasim Khan, Ye Li,
	Igor Opaniuk, Stefan Roese, Minkyu Kang, AKASHI Takahiro,
	Weijie Gao, Vabhav Sharma, Andy Shevchenko, Pratyush Yadav

Hi Mark,

On Sat, 25 Sept 2021 at 02:11, Mark Kettenis <mark.kettenis@xs4all.nl> wrote:
>
> > From: Simon Glass <sjg@chromium.org>
> > Date: Fri, 24 Sep 2021 19:20:32 -0600
> >
> > Hi Mark,
> >
> > On Sat, 18 Sept 2021 at 07:54, Mark Kettenis <kettenis@openbsd.org> wrote:
> > >
> > > This series adds basic support for Apple's M1 SoC to U-Boot.
> > > This builds a basic U-Boot that can be used as a payload
> > > for the m1n1 boot loader being developed by the Asahi Linux
> > > project.
> > >
> > > The goal here is to privide an UEFI interface on these machines that
> >
> > provide
> >
> > > allows booting various open source OSes.  This initial series provides
> > > support for the serial port, framebuffer and the USB 3.1 Type-C ports.
> > > It can boot a support OS (e.g. OpenBSD/arm64) from a USB disk.
> > >
> > > Mark Kettenis (5):
> > >   arm: apple: Add initial support for Apple's M1 SoC
> > >   serial: s5p: Add Apple M1 support
> > >   misc: Add Apple DART driver
> > >   arm: dts: apple: Add preliminary device trees
> > >   doc: board: apple: Add Apple M1 documentation
> > >
> > >  arch/arm/Kconfig                              |  22 +
> > >  arch/arm/Makefile                             |   1 +
> > >  arch/arm/dts/t8103-j274.dts                   | 135 +++++
> > >  arch/arm/dts/t8103-j293.dts                   |  97 ++++
> > >  arch/arm/dts/t8103.dtsi                       | 506 ++++++++++++++++++
> > >  arch/arm/include/asm/arch-m1/clk.h            |  11 +
> > >  arch/arm/include/asm/arch-m1/uart.h           |  41 ++
> > >  arch/arm/mach-apple/Kconfig                   |  18 +
> > >  arch/arm/mach-apple/Makefile                  |   4 +
> > >  arch/arm/mach-apple/board.c                   | 163 ++++++
> > >  arch/arm/mach-apple/lowlevel_init.S           |  16 +
> > >  configs/apple_m1_defconfig                    |  14 +
> > >  doc/board/apple/index.rst                     |   9 +
> > >  doc/board/apple/m1.rst                        |  54 ++
> > >  doc/board/index.rst                           |   1 +
> > >  drivers/misc/Kconfig                          |   7 +
> > >  drivers/misc/Makefile                         |   1 +
> > >  drivers/misc/apple_dart.c                     | 171 ++++++
> > >  drivers/serial/Kconfig                        |   2 +-
> > >  drivers/serial/serial_s5p.c                   |  22 +
> > >  include/configs/apple.h                       |  38 ++
> > >  .../interrupt-controller/apple-aic.h          |  15 +
> > >  include/dt-bindings/pinctrl/apple.h           |  13 +
> > >  include/dt-bindings/spmi/spmi.h               |  10 +
> > >  24 files changed, 1370 insertions(+), 1 deletion(-)
> > >  create mode 100644 arch/arm/dts/t8103-j274.dts
> > >  create mode 100644 arch/arm/dts/t8103-j293.dts
> > >  create mode 100644 arch/arm/dts/t8103.dtsi
> > >  create mode 100644 arch/arm/include/asm/arch-m1/clk.h
> > >  create mode 100644 arch/arm/include/asm/arch-m1/uart.h
> > >  create mode 100644 arch/arm/mach-apple/Kconfig
> > >  create mode 100644 arch/arm/mach-apple/Makefile
> > >  create mode 100644 arch/arm/mach-apple/board.c
> > >  create mode 100644 arch/arm/mach-apple/lowlevel_init.S
> > >  create mode 100644 configs/apple_m1_defconfig
> > >  create mode 100644 doc/board/apple/index.rst
> > >  create mode 100644 doc/board/apple/m1.rst
> > >  create mode 100644 drivers/misc/apple_dart.c
> > >  create mode 100644 include/configs/apple.h
> > >  create mode 100644 include/dt-bindings/interrupt-controller/apple-aic.h
> > >  create mode 100644 include/dt-bindings/pinctrl/apple.h
> > >  create mode 100644 include/dt-bindings/spmi/spmi.h
> > >
> > > --
> > > 2.33.0
> > >
> >
> > I gave this a whirl on a Macbook Air A2337 and needed the patch below
> > to build the devicetree files. Sorry the formatting is broken.
> >
> > Also when booting I get this:
> >
> > ...
> > Preparing to boot kernel at 0x808200000 with fdt at 0x8082e8000
> > Valid payload found
> > Preparing to run next stage at 0x808200000...
> > MMU: shutting down...
> > MMU: shutdown successful, clearing caches
> >
> >
> > Then the display clears and it hangs. If I try the J274 devicetree it
> > just reboots at that point.
> >
> > What should I expect? I was hoping for console output as I don't have
> > serial connected. I don't have a suitable serial cable, and the USB
> > gadget mode did not result in a ttyACM0 device appearing.
>
> For framebuffer support you also need the "30bpp framebuffer support"
> series I posted earlier:
>
> https://patchwork.ozlabs.org/project/uboot/list/?series=262617
>
> With that your should get the usual U-Boot output on the screen.  I've
> not tested the Air, but it should work there.

Ah OK, yes that fixes it, thanks!

So how do I get the keyboard to work in U-Boot? Or are you using serial somehow?

Also it takes for ever to put a test version on the device...how are
you doing that for development?

>
> I'll probably post a v2 of that series this weekend as I fixed the EFI
> GOP support with the help of Heinrich.  But that shouldn't matter for
> U-Boot itself.

OK

>
> Regarding the device tree, I was afraid that setting
> CONFIG_DEFAULT_DEVICE_TREE would make the distroboot commands try to
> load a device tree from disk before loading the EFI bootloader, but it
> looks I was mistaken there.  It still is a little bit pointless to
> build the device tree and a u-boot.bin that includes it, but if that
> makes you happier, I'll add it to the series.

Well I get a build error without it, so yes please. It's just a default.

Regards,
Simon


>
> Cheers,
>
> Mark
>
> > Subject: [PATCH] Fix up devicetree
> >
> > Get these building.
> >
> > Signed-off-by: Simon Glass <sjg@chromium.org>
> > ---
> >
> >  arch/arm/dts/Makefile      |  2 ++
> >  configs/apple_m1_defconfig | 11 +++++------
> >  2 files changed, 7 insertions(+), 6 deletions(-)
> >
> > diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> > index fc16a57e60b..0c40947cc33 100644
> > --- a/arch/arm/dts/Makefile
> > +++ b/arch/arm/dts/Makefile
> > @@ -1130,6 +1130,8 @@ dtb-$(CONFIG_TARGET_IMX8MM_CL_IOT_GATE) +=
> > imx8mm-cl-iot-gate.dtb
> >
> >  dtb-$(CONFIG_TARGET_EA_LPC3250DEVKITV2) += lpc3250-ea3250.dtb
> >
> > +dtb-$(CONFIG_ARCH_APPLE) += t8103-j274.dtb t8103-j293.dtb
> > +
> >  targets += $(dtb-y)
> >
> >  # Add any required device tree compiler flags here
> > diff --git a/configs/apple_m1_defconfig b/configs/apple_m1_defconfig
> > index a7ae15576bf..7712a0bac52 100644
> > --- a/configs/apple_m1_defconfig
> > +++ b/configs/apple_m1_defconfig
> > @@ -1,14 +1,13 @@
> >  CONFIG_ARM=y
> >  CONFIG_ARCH_APPLE=y
> > +CONFIG_DEFAULT_DEVICE_TREE="t8103-j293"
> > +CONFIG_USE_PREBOOT=y
> >  # CONFIG_DISPLAY_CPUINFO is not set
> > -# CONFIG_MMC is not set
> > -# CONFIG_NET is not set
> > -CONFIG_VIDEO_SIMPLE=y
> >  CONFIG_DISPLAY_BOARDINFO_LATE=y
> > +# CONFIG_NET is not set
> > +# CONFIG_MMC is not set
> >  CONFIG_USB_XHCI_HCD=y
> >  CONFIG_USB_XHCI_DWC3=y
> >  CONFIG_USB_KEYBOARD=y
> > -CONFIG_USB_STORAGE=y
> > -CONFIG_USE_PREBOOT=y
> > -CONFIG_PREBOOT="usb start"
> > +CONFIG_VIDEO_SIMPLE=y
> >  # CONFIG_GENERATE_SMBIOS_TABLE is not set
> > --
> > 2.25.1
> >

^ permalink raw reply	[flat|nested] 46+ messages in thread

* Re: [PATCH 1/5] arm: apple: Add initial support for Apple's M1 SoC
  2021-09-21 16:08             ` Mark Kettenis
@ 2021-09-25 13:27               ` Simon Glass
  0 siblings, 0 replies; 46+ messages in thread
From: Simon Glass @ 2021-09-25 13:27 UTC (permalink / raw)
  To: Mark Kettenis
  Cc: Bin Meng, Tom Rini, Mark Kettenis, U-Boot Mailing List,
	Bharat Gooty, Rayagonda Kokatanur, Oliver Graute, Bin Meng,
	Leo Liang, Tianrui Wei, Stephan Gerhold, Padmarao Begari,
	Kishon Vijay Abraham I, Heinrich Schuchardt, Michael Walle,
	Masami Hiramatsu, Asherah Connor, Wasim Khan, Michal Simek,
	Igor Opaniuk, Heiko Schocher, Ye Li, Stefan Roese, Vabhav Sharma,
	Marek Behún, Weijie Gao, AKASHI Takahiro, Andy Shevchenko,
	Pratyush Yadav

Hi Mark,

On Tue, 21 Sept 2021 at 10:09, Mark Kettenis <mark.kettenis@xs4all.nl> wrote:
>
> > From: Bin Meng <bmeng.cn@gmail.com>
> > Date: Tue, 21 Sep 2021 23:53:10 +0800
> >
> > On Tue, Sep 21, 2021 at 8:42 PM Tom Rini <trini@konsulko.com> wrote:
> > >
> > > On Sun, Sep 19, 2021 at 10:33:25PM +0200, Mark Kettenis wrote:
> > > > > From: Bin Meng <bmeng.cn@gmail.com>
> > > > > Date: Sun, 19 Sep 2021 09:17:07 +0800
> > > > >
> > > > > Hi Mark,
> > > > >
> > > > > On Sun, Sep 19, 2021 at 9:04 AM Bin Meng <bmeng.cn@gmail.com> wrote:
> > > > > >
> > > > > > Hi Mark,
> > > > > >
> > > > > > On Sat, Sep 18, 2021 at 9:55 PM Mark Kettenis <kettenis@openbsd.org> wrote:
> > > > > > >
> > > > > > > Add support for Apple's M1 SoC that is used in "Apple Silicon"
> > > > > > > Macs.  This builds a basic U-Boot that can be used as a payload
> > > > > > > for the m1n1 boot loader being developed by the Asahi Linux
> > > > > > > project.
> > > > > > >
> > > > > > > Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
> > > > > > > ---
> > > > > > >  arch/arm/Kconfig                    |  22 ++++
> > > > > > >  arch/arm/Makefile                   |   1 +
> > > > > > >  arch/arm/mach-apple/Kconfig         |  18 ++++
> > > > > > >  arch/arm/mach-apple/Makefile        |   4 +
> > > > > > >  arch/arm/mach-apple/board.c         | 158 ++++++++++++++++++++++++++++
> > > > > > >  arch/arm/mach-apple/lowlevel_init.S |  16 +++
> > > > > > >  configs/apple_m1_defconfig          |  14 +++
> > > > > > >  include/configs/apple.h             |  38 +++++++
> > > > > > >  8 files changed, 271 insertions(+)
> > > > > > >  create mode 100644 arch/arm/mach-apple/Kconfig
> > > > > > >  create mode 100644 arch/arm/mach-apple/Makefile
> > > > > > >  create mode 100644 arch/arm/mach-apple/board.c
> > > > > > >  create mode 100644 arch/arm/mach-apple/lowlevel_init.S
> > > > > > >  create mode 100644 configs/apple_m1_defconfig
> > > > > > >  create mode 100644 include/configs/apple.h
> > > > > > >
[..]

> > > > > > > diff --git a/arch/arm/mach-apple/lowlevel_init.S b/arch/arm/mach-apple/lowlevel_init.S
> > > > > > > new file mode 100644
> > > > > > > index 0000000000..0f5313163e
> > > > > > > --- /dev/null
> > > > > > > +++ b/arch/arm/mach-apple/lowlevel_init.S
> > > > > > > @@ -0,0 +1,16 @@
> > > > > > > +/* SPDX-License-Identifier: GPL-2.0+ */
> > > > > > > +/*
> > > > > > > + * (C) Copyright 2021 Mark Kettenis <kettenis@openbsd.org>
> > > > > > > + */
> > > > > > > +
> > > > > > > +.align 8
> > > > > > > +.global fw_dtb_pointer
> > > > > > > +fw_dtb_pointer:
> > > > > > > +       .quad   0
> > > > > >
> > > > > > Is this filled in by m1n1?
> > > > >
> > > > > Sorry I misread, so this is passed by m1n1 and filled in by U-Boot. I
> > > > > think we should stop using CONFIG_OF_BOARD, and for such case we
> > > > > should use CONFIG_OF_PRIOR_STAGE.
> > > >
> > > > Yes, CONFIG_OF_PRIOR_STAGE would work as well.  But Tom was talking
> > > > about removing that option in favour of CONFIG_OF_BOARD the other day.
> > >
> > > Yes.  I was even looking for some feedback from you, Bin, on converting
> > > some boards from CONFIG_OF_PRIOR_STAGE to CONFIG_OF_BOARD.  It seems
> > > like CONFIG_OF_PRIOR_STAGE is a subset of CONFIG_OF_BOARD, at the cost
> > > of possibly a few bytes.
> >
> > Ah, I thought we wanted to do the other way around, by removing
> > CONFIG_OF_BOARD, and convert that to CONFIG_OF_PRIORI_STAGE?
>
> I must say that I see some logic in keeping both, where
> CONFIG_OF_BOARD indicates that the device tree is somehow stored on
> the board and U-Boot has to run some code to fetch it, and
> CONFIG_OF_PRIOR_STAGE is used when the device tree is provided by
> firmware that runs before U-Boot.
>
> In that case I obviously should use CONFIG_OF_PRIOR_STAGE here.

Well see Ilias' series where he proposed going with OF_BOARD!

Tested on: Macbook Air M1
Tested-by: Simon Glass <sjg@chromium.org>

Regards,
Simon

^ permalink raw reply	[flat|nested] 46+ messages in thread

* Re: [PATCH 2/5] serial: s5p: Add Apple M1 support
  2021-09-20  3:15   ` Simon Glass
@ 2021-09-25 13:27     ` Simon Glass
  2021-10-02 22:15     ` Mark Kettenis
  1 sibling, 0 replies; 46+ messages in thread
From: Simon Glass @ 2021-09-25 13:27 UTC (permalink / raw)
  To: Mark Kettenis
  Cc: U-Boot Mailing List, Oliver Graute, Leo Yu-Chi Liang,
	Kishon Vijay Abraham I, Priyanka Jain, Stephan Gerhold,
	Padmarao Begari, Tianrui Wei, Michael Walle, Heinrich Schuchardt,
	Asherah Connor, Bin Meng, Michal Simek, Wasim Khan, Ye Li,
	Igor Opaniuk, Stefan Roese, AKASHI Takahiro, Vabhav Sharma,
	Weijie Gao, Pratyush Yadav, Andy Shevchenko

On Sun, 19 Sept 2021 at 21:15, Simon Glass <sjg@chromium.org> wrote:
>
> Hi Mark,
>
> On Sat, 18 Sept 2021 at 07:55, Mark Kettenis <kettenis@openbsd.org> wrote:
> >
> > Apple M1 SoCs include an S5L UART which is a variant of the S5P
> > UART.  Add support for this variant and enable it by default
> > on Apple SoCs.
> >
> > Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
> > ---
> >  arch/arm/include/asm/arch-m1/clk.h  | 11 ++++++++
> >  arch/arm/include/asm/arch-m1/uart.h | 41 +++++++++++++++++++++++++++++
> >  arch/arm/mach-apple/board.c         |  5 ++++
> >  drivers/serial/Kconfig              |  2 +-
> >  drivers/serial/serial_s5p.c         | 22 ++++++++++++++++
> >  5 files changed, 80 insertions(+), 1 deletion(-)
> >  create mode 100644 arch/arm/include/asm/arch-m1/clk.h
> >  create mode 100644 arch/arm/include/asm/arch-m1/uart.h
> >

Tested on: Macbook Air M1
Tested-by: Simon Glass <sjg@chromium.org>

^ permalink raw reply	[flat|nested] 46+ messages in thread

* Re: [PATCH 3/5] misc: Add Apple DART driver
  2021-09-21  1:11       ` Simon Glass
@ 2021-09-25 13:27         ` Simon Glass
  2021-09-26 20:53         ` Mark Kettenis
  1 sibling, 0 replies; 46+ messages in thread
From: Simon Glass @ 2021-09-25 13:27 UTC (permalink / raw)
  To: Mark Kettenis
  Cc: Mark Kettenis, U-Boot Mailing List, Oliver Graute,
	Stephan Gerhold, Masami Hiramatsu, Priyanka Jain, Leo Liang,
	Padmarao Begari, Michael Walle, Kishon Vijay Abraham I,
	Heinrich Schuchardt, Bin Meng, Asherah Connor, Michal Simek,
	Wasim Khan, Heiko Schocher, Igor Opaniuk, Ye Li, Stefan Roese,
	AKASHI Takahiro, Weijie Gao, Vabhav Sharma, Andy Shevchenko,
	Pratyush Yadav

On Mon, 20 Sept 2021 at 19:11, Simon Glass <sjg@chromium.org> wrote:
>
> Hi Mark,
>
> On Mon, 20 Sept 2021 at 02:33, Mark Kettenis <mark.kettenis@xs4all.nl> wrote:
> >
> > > From: Simon Glass <sjg@chromium.org>
> > > Date: Sun, 19 Sep 2021 21:16:00 -0600
> > >
> > > Hi Mark,
> > >
> > > On Sat, 18 Sept 2021 at 07:55, Mark Kettenis <kettenis@openbsd.org> wrote:
> > > >
> > > > The DART is an IOMMU that is used on Apple's M1 SoC.  This driver
> > > > supports the DART in bypass mode as well as in a mode where it
> > > > creates a 1:1 mapping of a subset of RAM as not all DARTs support
> > > > bypass mode.  The USB3 ports integrated on the SoC use a DART
> > > > that supports bypass mode.  The 1:1 mapping will be used in the
> > > > future to support other devices such as the PCIe host bridge
> > > > of the M1 SoC.
> > > >
> > > > Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
> > > > ---
> > > >  drivers/misc/Kconfig      |   7 ++
> > > >  drivers/misc/Makefile     |   1 +
> > > >  drivers/misc/apple_dart.c | 171 ++++++++++++++++++++++++++++++++++++++
> > > >  3 files changed, 179 insertions(+)
> > > >  create mode 100644 drivers/misc/apple_dart.c
> > > >
>

Tested on: Macbook Air M1
Tested-by: Simon Glass <sjg@chromium.org>

^ permalink raw reply	[flat|nested] 46+ messages in thread

* Re: [PATCH 4/5] arm: dts: apple: Add preliminary device trees
  2021-09-20  3:16   ` Simon Glass
@ 2021-09-25 13:27     ` Simon Glass
  0 siblings, 0 replies; 46+ messages in thread
From: Simon Glass @ 2021-09-25 13:27 UTC (permalink / raw)
  To: Mark Kettenis
  Cc: U-Boot Mailing List, Oliver Graute, Leo Yu-Chi Liang, Anup Patel,
	Bin Meng, Kishon Vijay Abraham I, Stephan Gerhold, Tianrui Wei,
	Heinrich Schuchardt, Asherah Connor, Michal Simek, Wasim Khan,
	Igor Opaniuk, Ye Li, Stefan Roese, Vabhav Sharma,
	Marek Behún, Weijie Gao, AKASHI Takahiro, Andy Shevchenko,
	Pratyush Yadav

On Sun, 19 Sept 2021 at 21:16, Simon Glass <sjg@chromium.org> wrote:
>
> On Sat, 18 Sept 2021 at 07:56, Mark Kettenis <kettenis@openbsd.org> wrote:
> >
> > Add preliminary device trees for the Apple M1 mini (2020) and
> > Apple M1 Macbook Pro 13" (2020).  Device tree bindings for
> > the Apple M1 SoC are still being formalized and these device
> > trees will be synchronized with the Linux kernel as needed.
> >
> > These device trees are provided as a reference only as U-Boot
> > uses the device tree passed by the m1n1 bootloader.
> >
> > Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
> > ---
> >  arch/arm/dts/t8103-j274.dts                   | 135 +++++
> >  arch/arm/dts/t8103-j293.dts                   |  97 ++++
> >  arch/arm/dts/t8103.dtsi                       | 506 ++++++++++++++++++
> >  .../interrupt-controller/apple-aic.h          |  15 +
> >  include/dt-bindings/pinctrl/apple.h           |  13 +
> >  include/dt-bindings/spmi/spmi.h               |  10 +
> >  6 files changed, 776 insertions(+)
> >  create mode 100644 arch/arm/dts/t8103-j274.dts
> >  create mode 100644 arch/arm/dts/t8103-j293.dts
> >  create mode 100644 arch/arm/dts/t8103.dtsi
> >  create mode 100644 include/dt-bindings/interrupt-controller/apple-aic.h
> >  create mode 100644 include/dt-bindings/pinctrl/apple.h
> >  create mode 100644 include/dt-bindings/spmi/spmi.h
>
> Reviewed-by: Simon Glass <sjg@chromium.org>

Tested on: Macbook Air M1
Tested-by: Simon Glass <sjg@chromium.org>

^ permalink raw reply	[flat|nested] 46+ messages in thread

* Re: [PATCH 5/5] doc: board: apple: Add Apple M1 documentation
  2021-09-20  3:16   ` Simon Glass
@ 2021-09-25 13:27     ` Simon Glass
  0 siblings, 0 replies; 46+ messages in thread
From: Simon Glass @ 2021-09-25 13:27 UTC (permalink / raw)
  To: Mark Kettenis
  Cc: U-Boot Mailing List, Oliver Graute, Leo Yu-Chi Liang,
	Jonathan Balkind, Bin Meng, Michael Walle, Stephan Gerhold,
	Padmarao Begari, Tianrui Wei, Masami Hiramatsu,
	Heinrich Schuchardt, Asherah Connor, Michal Simek, Wasim Khan,
	Igor Opaniuk, Ye Li, Stefan Roese, Marek Behún,
	Vabhav Sharma, Weijie Gao, AKASHI Takahiro, Pratyush Yadav,
	Andy Shevchenko

On Sun, 19 Sept 2021 at 21:16, Simon Glass <sjg@chromium.org> wrote:
>
> On Sat, 18 Sept 2021 at 07:56, Mark Kettenis <kettenis@openbsd.org> wrote:
> >
> > Provide preliminary instructions on how to get U-Boot to run on
> > Apple Silicon Macs.
> >
> > Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
> > ---
> >  doc/board/apple/index.rst |  9 +++++++
> >  doc/board/apple/m1.rst    | 56 +++++++++++++++++++++++++++++++++++++++
> >  doc/board/index.rst       |  1 +
> >  3 files changed, 66 insertions(+)
> >  create mode 100644 doc/board/apple/index.rst
> >  create mode 100644 doc/board/apple/m1.rst
>
> Reviewed-by: Simon Glass <sjg@chromium.org>

Tested on: Macbook Air M1
Tested-by: Simon Glass <sjg@chromium.org>

^ permalink raw reply	[flat|nested] 46+ messages in thread

* Re: [PATCH 0/5] Apple M1 Support
  2021-09-25 13:27     ` Simon Glass
@ 2021-09-25 13:52       ` Mark Kettenis
  2021-09-25 14:42         ` Simon Glass
  0 siblings, 1 reply; 46+ messages in thread
From: Mark Kettenis @ 2021-09-25 13:52 UTC (permalink / raw)
  To: Simon Glass
  Cc: kettenis, u-boot, oliver.graute, michael, anup.patel, jbalkind,
	tianrui-wei, padmarao.begari, kishon, stephan, xypron.glpk,
	bin.meng, ashe, michal.simek, wasim.khan, ye.li, igor.opaniuk,
	sr, mk7.kang, takahiro.akashi, weijie.gao, vabhav.sharma,
	andriy.shevchenko, p.yadav

> From: Simon Glass <sjg@chromium.org>
> Date: Sat, 25 Sep 2021 07:27:41 -0600
> 
> Hi Mark,
> 
> On Sat, 25 Sept 2021 at 02:11, Mark Kettenis <mark.kettenis@xs4all.nl> wrote:
> >
> > > From: Simon Glass <sjg@chromium.org>
> > > Date: Fri, 24 Sep 2021 19:20:32 -0600
> > >
> > > Hi Mark,
> > >
> > > On Sat, 18 Sept 2021 at 07:54, Mark Kettenis <kettenis@openbsd.org> wrote:
> > > >
> > > > This series adds basic support for Apple's M1 SoC to U-Boot.
> > > > This builds a basic U-Boot that can be used as a payload
> > > > for the m1n1 boot loader being developed by the Asahi Linux
> > > > project.
> > > >
> > > > The goal here is to privide an UEFI interface on these machines that
> > >
> > > provide
> > >
> > > > allows booting various open source OSes.  This initial series provides
> > > > support for the serial port, framebuffer and the USB 3.1 Type-C ports.
> > > > It can boot a support OS (e.g. OpenBSD/arm64) from a USB disk.
> > > >
> > > > Mark Kettenis (5):
> > > >   arm: apple: Add initial support for Apple's M1 SoC
> > > >   serial: s5p: Add Apple M1 support
> > > >   misc: Add Apple DART driver
> > > >   arm: dts: apple: Add preliminary device trees
> > > >   doc: board: apple: Add Apple M1 documentation
> > > >
> > > >  arch/arm/Kconfig                              |  22 +
> > > >  arch/arm/Makefile                             |   1 +
> > > >  arch/arm/dts/t8103-j274.dts                   | 135 +++++
> > > >  arch/arm/dts/t8103-j293.dts                   |  97 ++++
> > > >  arch/arm/dts/t8103.dtsi                       | 506 ++++++++++++++++++
> > > >  arch/arm/include/asm/arch-m1/clk.h            |  11 +
> > > >  arch/arm/include/asm/arch-m1/uart.h           |  41 ++
> > > >  arch/arm/mach-apple/Kconfig                   |  18 +
> > > >  arch/arm/mach-apple/Makefile                  |   4 +
> > > >  arch/arm/mach-apple/board.c                   | 163 ++++++
> > > >  arch/arm/mach-apple/lowlevel_init.S           |  16 +
> > > >  configs/apple_m1_defconfig                    |  14 +
> > > >  doc/board/apple/index.rst                     |   9 +
> > > >  doc/board/apple/m1.rst                        |  54 ++
> > > >  doc/board/index.rst                           |   1 +
> > > >  drivers/misc/Kconfig                          |   7 +
> > > >  drivers/misc/Makefile                         |   1 +
> > > >  drivers/misc/apple_dart.c                     | 171 ++++++
> > > >  drivers/serial/Kconfig                        |   2 +-
> > > >  drivers/serial/serial_s5p.c                   |  22 +
> > > >  include/configs/apple.h                       |  38 ++
> > > >  .../interrupt-controller/apple-aic.h          |  15 +
> > > >  include/dt-bindings/pinctrl/apple.h           |  13 +
> > > >  include/dt-bindings/spmi/spmi.h               |  10 +
> > > >  24 files changed, 1370 insertions(+), 1 deletion(-)
> > > >  create mode 100644 arch/arm/dts/t8103-j274.dts
> > > >  create mode 100644 arch/arm/dts/t8103-j293.dts
> > > >  create mode 100644 arch/arm/dts/t8103.dtsi
> > > >  create mode 100644 arch/arm/include/asm/arch-m1/clk.h
> > > >  create mode 100644 arch/arm/include/asm/arch-m1/uart.h
> > > >  create mode 100644 arch/arm/mach-apple/Kconfig
> > > >  create mode 100644 arch/arm/mach-apple/Makefile
> > > >  create mode 100644 arch/arm/mach-apple/board.c
> > > >  create mode 100644 arch/arm/mach-apple/lowlevel_init.S
> > > >  create mode 100644 configs/apple_m1_defconfig
> > > >  create mode 100644 doc/board/apple/index.rst
> > > >  create mode 100644 doc/board/apple/m1.rst
> > > >  create mode 100644 drivers/misc/apple_dart.c
> > > >  create mode 100644 include/configs/apple.h
> > > >  create mode 100644 include/dt-bindings/interrupt-controller/apple-aic.h
> > > >  create mode 100644 include/dt-bindings/pinctrl/apple.h
> > > >  create mode 100644 include/dt-bindings/spmi/spmi.h
> > > >
> > > > --
> > > > 2.33.0
> > > >
> > >
> > > I gave this a whirl on a Macbook Air A2337 and needed the patch below
> > > to build the devicetree files. Sorry the formatting is broken.
> > >
> > > Also when booting I get this:
> > >
> > > ...
> > > Preparing to boot kernel at 0x808200000 with fdt at 0x8082e8000
> > > Valid payload found
> > > Preparing to run next stage at 0x808200000...
> > > MMU: shutting down...
> > > MMU: shutdown successful, clearing caches
> > >
> > >
> > > Then the display clears and it hangs. If I try the J274 devicetree it
> > > just reboots at that point.
> > >
> > > What should I expect? I was hoping for console output as I don't have
> > > serial connected. I don't have a suitable serial cable, and the USB
> > > gadget mode did not result in a ttyACM0 device appearing.
> >
> > For framebuffer support you also need the "30bpp framebuffer support"
> > series I posted earlier:
> >
> > https://patchwork.ozlabs.org/project/uboot/list/?series=262617
> >
> > With that your should get the usual U-Boot output on the screen.  I've
> > not tested the Air, but it should work there.
> 
> Ah OK, yes that fixes it, thanks!
> 
> So how do I get the keyboard to work in U-Boot? Or are you using
> serial somehow?

The laptop keyboard doesn't work yet, so I'm using a USB keyboard when
I'm not using a serial console.  You need the xhci-dwc3 diff I sent
earlier for that:

https://patchwork.ozlabs.org/project/uboot/patch/20210916140009.59009-1-kettenis@openbsd.org/

> Also it takes for ever to put a test version on the device...how are
> you doing that for development?

If you install m1n1.macho without a payload, you can then use the
python scripts that come with m1n1 to upload kernels over serial.
There is a USB gadget implementation in m1n1, so you don't need a real
serial connection.  Just connect a Linux machine to the M1 Mac using a
USB cable and a USB serial device should show up on the Linux machine
once m1n1 is running on the Mac.  Set the M1N1DEVICE environment
variable to the right device name and run:

$ python3 linux.py --compression=none u-boot-nodtb.bin t8103-j274.dtb

> > I'll probably post a v2 of that series this weekend as I fixed the EFI
> > GOP support with the help of Heinrich.  But that shouldn't matter for
> > U-Boot itself.
> 
> OK
> 
> >
> > Regarding the device tree, I was afraid that setting
> > CONFIG_DEFAULT_DEVICE_TREE would make the distroboot commands try to
> > load a device tree from disk before loading the EFI bootloader, but it
> > looks I was mistaken there.  It still is a little bit pointless to
> > build the device tree and a u-boot.bin that includes it, but if that
> > makes you happier, I'll add it to the series.
> 
> Well I get a build error without it, so yes please. It's just a default.
> 
> Regards,
> Simon
> 
> 
> >
> > Cheers,
> >
> > Mark
> >
> > > Subject: [PATCH] Fix up devicetree
> > >
> > > Get these building.
> > >
> > > Signed-off-by: Simon Glass <sjg@chromium.org>
> > > ---
> > >
> > >  arch/arm/dts/Makefile      |  2 ++
> > >  configs/apple_m1_defconfig | 11 +++++------
> > >  2 files changed, 7 insertions(+), 6 deletions(-)
> > >
> > > diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> > > index fc16a57e60b..0c40947cc33 100644
> > > --- a/arch/arm/dts/Makefile
> > > +++ b/arch/arm/dts/Makefile
> > > @@ -1130,6 +1130,8 @@ dtb-$(CONFIG_TARGET_IMX8MM_CL_IOT_GATE) +=
> > > imx8mm-cl-iot-gate.dtb
> > >
> > >  dtb-$(CONFIG_TARGET_EA_LPC3250DEVKITV2) += lpc3250-ea3250.dtb
> > >
> > > +dtb-$(CONFIG_ARCH_APPLE) += t8103-j274.dtb t8103-j293.dtb
> > > +
> > >  targets += $(dtb-y)
> > >
> > >  # Add any required device tree compiler flags here
> > > diff --git a/configs/apple_m1_defconfig b/configs/apple_m1_defconfig
> > > index a7ae15576bf..7712a0bac52 100644
> > > --- a/configs/apple_m1_defconfig
> > > +++ b/configs/apple_m1_defconfig
> > > @@ -1,14 +1,13 @@
> > >  CONFIG_ARM=y
> > >  CONFIG_ARCH_APPLE=y
> > > +CONFIG_DEFAULT_DEVICE_TREE="t8103-j293"
> > > +CONFIG_USE_PREBOOT=y
> > >  # CONFIG_DISPLAY_CPUINFO is not set
> > > -# CONFIG_MMC is not set
> > > -# CONFIG_NET is not set
> > > -CONFIG_VIDEO_SIMPLE=y
> > >  CONFIG_DISPLAY_BOARDINFO_LATE=y
> > > +# CONFIG_NET is not set
> > > +# CONFIG_MMC is not set
> > >  CONFIG_USB_XHCI_HCD=y
> > >  CONFIG_USB_XHCI_DWC3=y
> > >  CONFIG_USB_KEYBOARD=y
> > > -CONFIG_USB_STORAGE=y
> > > -CONFIG_USE_PREBOOT=y
> > > -CONFIG_PREBOOT="usb start"
> > > +CONFIG_VIDEO_SIMPLE=y
> > >  # CONFIG_GENERATE_SMBIOS_TABLE is not set
> > > --
> > > 2.25.1
> > >
> 

^ permalink raw reply	[flat|nested] 46+ messages in thread

* Re: [PATCH 0/5] Apple M1 Support
  2021-09-25 13:52       ` Mark Kettenis
@ 2021-09-25 14:42         ` Simon Glass
  2021-09-25 16:45           ` Mark Kettenis
  0 siblings, 1 reply; 46+ messages in thread
From: Simon Glass @ 2021-09-25 14:42 UTC (permalink / raw)
  To: Mark Kettenis
  Cc: Mark Kettenis, U-Boot Mailing List, Oliver Graute, Michael Walle,
	Anup Patel, Jonathan Balkind, Tianrui Wei, Padmarao Begari,
	Kishon Vijay Abraham I, Stephan Gerhold, Heinrich Schuchardt,
	Bin Meng, Asherah Connor, Michal Simek, Wasim Khan, Ye Li,
	Igor Opaniuk, Stefan Roese, Minkyu Kang, AKASHI Takahiro,
	Weijie Gao, Vabhav Sharma, Andy Shevchenko, Pratyush Yadav

Hi Mark,

On Sat, 25 Sept 2021 at 07:52, Mark Kettenis <mark.kettenis@xs4all.nl> wrote:
>
> > From: Simon Glass <sjg@chromium.org>
> > Date: Sat, 25 Sep 2021 07:27:41 -0600
> >
> > Hi Mark,
> >
> > On Sat, 25 Sept 2021 at 02:11, Mark Kettenis <mark.kettenis@xs4all.nl> wrote:
> > >
> > > > From: Simon Glass <sjg@chromium.org>
> > > > Date: Fri, 24 Sep 2021 19:20:32 -0600
> > > >
> > > > Hi Mark,
> > > >
> > > > On Sat, 18 Sept 2021 at 07:54, Mark Kettenis <kettenis@openbsd.org> wrote:
> > > > >
> > > > > This series adds basic support for Apple's M1 SoC to U-Boot.
> > > > > This builds a basic U-Boot that can be used as a payload
> > > > > for the m1n1 boot loader being developed by the Asahi Linux
> > > > > project.
> > > > >
> > > > > The goal here is to privide an UEFI interface on these machines that
> > > >
> > > > provide
> > > >
> > > > > allows booting various open source OSes.  This initial series provides
> > > > > support for the serial port, framebuffer and the USB 3.1 Type-C ports.
> > > > > It can boot a support OS (e.g. OpenBSD/arm64) from a USB disk.
> > > > >
> > > > > Mark Kettenis (5):
> > > > >   arm: apple: Add initial support for Apple's M1 SoC
> > > > >   serial: s5p: Add Apple M1 support
> > > > >   misc: Add Apple DART driver
> > > > >   arm: dts: apple: Add preliminary device trees
> > > > >   doc: board: apple: Add Apple M1 documentation
> > > > >
> > > > >  arch/arm/Kconfig                              |  22 +
> > > > >  arch/arm/Makefile                             |   1 +
> > > > >  arch/arm/dts/t8103-j274.dts                   | 135 +++++
> > > > >  arch/arm/dts/t8103-j293.dts                   |  97 ++++
> > > > >  arch/arm/dts/t8103.dtsi                       | 506 ++++++++++++++++++
> > > > >  arch/arm/include/asm/arch-m1/clk.h            |  11 +
> > > > >  arch/arm/include/asm/arch-m1/uart.h           |  41 ++
> > > > >  arch/arm/mach-apple/Kconfig                   |  18 +
> > > > >  arch/arm/mach-apple/Makefile                  |   4 +
> > > > >  arch/arm/mach-apple/board.c                   | 163 ++++++
> > > > >  arch/arm/mach-apple/lowlevel_init.S           |  16 +
> > > > >  configs/apple_m1_defconfig                    |  14 +
> > > > >  doc/board/apple/index.rst                     |   9 +
> > > > >  doc/board/apple/m1.rst                        |  54 ++
> > > > >  doc/board/index.rst                           |   1 +
> > > > >  drivers/misc/Kconfig                          |   7 +
> > > > >  drivers/misc/Makefile                         |   1 +
> > > > >  drivers/misc/apple_dart.c                     | 171 ++++++
> > > > >  drivers/serial/Kconfig                        |   2 +-
> > > > >  drivers/serial/serial_s5p.c                   |  22 +
> > > > >  include/configs/apple.h                       |  38 ++
> > > > >  .../interrupt-controller/apple-aic.h          |  15 +
> > > > >  include/dt-bindings/pinctrl/apple.h           |  13 +
> > > > >  include/dt-bindings/spmi/spmi.h               |  10 +
> > > > >  24 files changed, 1370 insertions(+), 1 deletion(-)
> > > > >  create mode 100644 arch/arm/dts/t8103-j274.dts
> > > > >  create mode 100644 arch/arm/dts/t8103-j293.dts
> > > > >  create mode 100644 arch/arm/dts/t8103.dtsi
> > > > >  create mode 100644 arch/arm/include/asm/arch-m1/clk.h
> > > > >  create mode 100644 arch/arm/include/asm/arch-m1/uart.h
> > > > >  create mode 100644 arch/arm/mach-apple/Kconfig
> > > > >  create mode 100644 arch/arm/mach-apple/Makefile
> > > > >  create mode 100644 arch/arm/mach-apple/board.c
> > > > >  create mode 100644 arch/arm/mach-apple/lowlevel_init.S
> > > > >  create mode 100644 configs/apple_m1_defconfig
> > > > >  create mode 100644 doc/board/apple/index.rst
> > > > >  create mode 100644 doc/board/apple/m1.rst
> > > > >  create mode 100644 drivers/misc/apple_dart.c
> > > > >  create mode 100644 include/configs/apple.h
> > > > >  create mode 100644 include/dt-bindings/interrupt-controller/apple-aic.h
> > > > >  create mode 100644 include/dt-bindings/pinctrl/apple.h
> > > > >  create mode 100644 include/dt-bindings/spmi/spmi.h
> > > > >
> > > > > --
> > > > > 2.33.0
> > > > >
> > > >
> > > > I gave this a whirl on a Macbook Air A2337 and needed the patch below
> > > > to build the devicetree files. Sorry the formatting is broken.
> > > >
> > > > Also when booting I get this:
> > > >
> > > > ...
> > > > Preparing to boot kernel at 0x808200000 with fdt at 0x8082e8000
> > > > Valid payload found
> > > > Preparing to run next stage at 0x808200000...
> > > > MMU: shutting down...
> > > > MMU: shutdown successful, clearing caches
> > > >
> > > >
> > > > Then the display clears and it hangs. If I try the J274 devicetree it
> > > > just reboots at that point.
> > > >
> > > > What should I expect? I was hoping for console output as I don't have
> > > > serial connected. I don't have a suitable serial cable, and the USB
> > > > gadget mode did not result in a ttyACM0 device appearing.
> > >
> > > For framebuffer support you also need the "30bpp framebuffer support"
> > > series I posted earlier:
> > >
> > > https://patchwork.ozlabs.org/project/uboot/list/?series=262617
> > >
> > > With that your should get the usual U-Boot output on the screen.  I've
> > > not tested the Air, but it should work there.
> >
> > Ah OK, yes that fixes it, thanks!
> >
> > So how do I get the keyboard to work in U-Boot? Or are you using
> > serial somehow?
>
> The laptop keyboard doesn't work yet, so I'm using a USB keyboard when
> I'm not using a serial console.  You need the xhci-dwc3 diff I sent
> earlier for that:
>
> https://patchwork.ozlabs.org/project/uboot/patch/20210916140009.59009-1-kettenis@openbsd.org/

Actually that seems to be applied in mainline now. Yes USB keyboard works.

It looks like the keyboard needs SPI and there is some sort of linux
keyboard driver, but perhaps not for M1.

>
> > Also it takes for ever to put a test version on the device...how are
> > you doing that for development?
>
> If you install m1n1.macho without a payload, you can then use the
> python scripts that come with m1n1 to upload kernels over serial.
> There is a USB gadget implementation in m1n1, so you don't need a real
> serial connection.  Just connect a Linux machine to the M1 Mac using a
> USB cable and a USB serial device should show up on the Linux machine
> once m1n1 is running on the Mac.  Set the M1N1DEVICE environment
> variable to the right device name and run:
>
> $ python3 linux.py --compression=none u-boot-nodtb.bin t8103-j274.dtb

OK I see. I did try the USB serial thing but was missing the fact that
U-Boot seems to kill it. So this works fine, thank you will await your
next series. Any way to get U-Boot serial console going in the same
way?

[..]

Regards,
Simon

^ permalink raw reply	[flat|nested] 46+ messages in thread

* Re: [PATCH 0/5] Apple M1 Support
  2021-09-25 14:42         ` Simon Glass
@ 2021-09-25 16:45           ` Mark Kettenis
  2021-09-26 15:53             ` Simon Glass
  0 siblings, 1 reply; 46+ messages in thread
From: Mark Kettenis @ 2021-09-25 16:45 UTC (permalink / raw)
  To: Simon Glass
  Cc: kettenis, u-boot, oliver.graute, michael, anup.patel, jbalkind,
	tianrui-wei, padmarao.begari, kishon, stephan, xypron.glpk,
	bin.meng, ashe, michal.simek, wasim.khan, ye.li, igor.opaniuk,
	sr, mk7.kang, takahiro.akashi, weijie.gao, vabhav.sharma,
	andriy.shevchenko, p.yadav

> From: Simon Glass <sjg@chromium.org>
> Date: Sat, 25 Sep 2021 08:42:30 -0600
> 
> Hi Mark,
> 
> On Sat, 25 Sept 2021 at 07:52, Mark Kettenis <mark.kettenis@xs4all.nl> wrote:
> >
> > > From: Simon Glass <sjg@chromium.org>
> > > Date: Sat, 25 Sep 2021 07:27:41 -0600
> > >
> > > Hi Mark,
> > >
> > > On Sat, 25 Sept 2021 at 02:11, Mark Kettenis <mark.kettenis@xs4all.nl> wrote:
> > > >
> > > > > From: Simon Glass <sjg@chromium.org>
> > > > > Date: Fri, 24 Sep 2021 19:20:32 -0600
> > > > >
> > > > > Hi Mark,
> > > > >
> > > > > On Sat, 18 Sept 2021 at 07:54, Mark Kettenis <kettenis@openbsd.org> wrote:
> > > > > >
> > > > > > This series adds basic support for Apple's M1 SoC to U-Boot.
> > > > > > This builds a basic U-Boot that can be used as a payload
> > > > > > for the m1n1 boot loader being developed by the Asahi Linux
> > > > > > project.
> > > > > >
> > > > > > The goal here is to privide an UEFI interface on these machines that
> > > > >
> > > > > provide
> > > > >
> > > > > > allows booting various open source OSes.  This initial series provides
> > > > > > support for the serial port, framebuffer and the USB 3.1 Type-C ports.
> > > > > > It can boot a support OS (e.g. OpenBSD/arm64) from a USB disk.
> > > > > >
> > > > > > Mark Kettenis (5):
> > > > > >   arm: apple: Add initial support for Apple's M1 SoC
> > > > > >   serial: s5p: Add Apple M1 support
> > > > > >   misc: Add Apple DART driver
> > > > > >   arm: dts: apple: Add preliminary device trees
> > > > > >   doc: board: apple: Add Apple M1 documentation
> > > > > >
> > > > > >  arch/arm/Kconfig                              |  22 +
> > > > > >  arch/arm/Makefile                             |   1 +
> > > > > >  arch/arm/dts/t8103-j274.dts                   | 135 +++++
> > > > > >  arch/arm/dts/t8103-j293.dts                   |  97 ++++
> > > > > >  arch/arm/dts/t8103.dtsi                       | 506 ++++++++++++++++++
> > > > > >  arch/arm/include/asm/arch-m1/clk.h            |  11 +
> > > > > >  arch/arm/include/asm/arch-m1/uart.h           |  41 ++
> > > > > >  arch/arm/mach-apple/Kconfig                   |  18 +
> > > > > >  arch/arm/mach-apple/Makefile                  |   4 +
> > > > > >  arch/arm/mach-apple/board.c                   | 163 ++++++
> > > > > >  arch/arm/mach-apple/lowlevel_init.S           |  16 +
> > > > > >  configs/apple_m1_defconfig                    |  14 +
> > > > > >  doc/board/apple/index.rst                     |   9 +
> > > > > >  doc/board/apple/m1.rst                        |  54 ++
> > > > > >  doc/board/index.rst                           |   1 +
> > > > > >  drivers/misc/Kconfig                          |   7 +
> > > > > >  drivers/misc/Makefile                         |   1 +
> > > > > >  drivers/misc/apple_dart.c                     | 171 ++++++
> > > > > >  drivers/serial/Kconfig                        |   2 +-
> > > > > >  drivers/serial/serial_s5p.c                   |  22 +
> > > > > >  include/configs/apple.h                       |  38 ++
> > > > > >  .../interrupt-controller/apple-aic.h          |  15 +
> > > > > >  include/dt-bindings/pinctrl/apple.h           |  13 +
> > > > > >  include/dt-bindings/spmi/spmi.h               |  10 +
> > > > > >  24 files changed, 1370 insertions(+), 1 deletion(-)
> > > > > >  create mode 100644 arch/arm/dts/t8103-j274.dts
> > > > > >  create mode 100644 arch/arm/dts/t8103-j293.dts
> > > > > >  create mode 100644 arch/arm/dts/t8103.dtsi
> > > > > >  create mode 100644 arch/arm/include/asm/arch-m1/clk.h
> > > > > >  create mode 100644 arch/arm/include/asm/arch-m1/uart.h
> > > > > >  create mode 100644 arch/arm/mach-apple/Kconfig
> > > > > >  create mode 100644 arch/arm/mach-apple/Makefile
> > > > > >  create mode 100644 arch/arm/mach-apple/board.c
> > > > > >  create mode 100644 arch/arm/mach-apple/lowlevel_init.S
> > > > > >  create mode 100644 configs/apple_m1_defconfig
> > > > > >  create mode 100644 doc/board/apple/index.rst
> > > > > >  create mode 100644 doc/board/apple/m1.rst
> > > > > >  create mode 100644 drivers/misc/apple_dart.c
> > > > > >  create mode 100644 include/configs/apple.h
> > > > > >  create mode 100644 include/dt-bindings/interrupt-controller/apple-aic.h
> > > > > >  create mode 100644 include/dt-bindings/pinctrl/apple.h
> > > > > >  create mode 100644 include/dt-bindings/spmi/spmi.h
> > > > > >
> > > > > > --
> > > > > > 2.33.0
> > > > > >
> > > > >
> > > > > I gave this a whirl on a Macbook Air A2337 and needed the patch below
> > > > > to build the devicetree files. Sorry the formatting is broken.
> > > > >
> > > > > Also when booting I get this:
> > > > >
> > > > > ...
> > > > > Preparing to boot kernel at 0x808200000 with fdt at 0x8082e8000
> > > > > Valid payload found
> > > > > Preparing to run next stage at 0x808200000...
> > > > > MMU: shutting down...
> > > > > MMU: shutdown successful, clearing caches
> > > > >
> > > > >
> > > > > Then the display clears and it hangs. If I try the J274 devicetree it
> > > > > just reboots at that point.
> > > > >
> > > > > What should I expect? I was hoping for console output as I don't have
> > > > > serial connected. I don't have a suitable serial cable, and the USB
> > > > > gadget mode did not result in a ttyACM0 device appearing.
> > > >
> > > > For framebuffer support you also need the "30bpp framebuffer support"
> > > > series I posted earlier:
> > > >
> > > > https://patchwork.ozlabs.org/project/uboot/list/?series=262617
> > > >
> > > > With that your should get the usual U-Boot output on the screen.  I've
> > > > not tested the Air, but it should work there.
> > >
> > > Ah OK, yes that fixes it, thanks!
> > >
> > > So how do I get the keyboard to work in U-Boot? Or are you using
> > > serial somehow?
> >
> > The laptop keyboard doesn't work yet, so I'm using a USB keyboard when
> > I'm not using a serial console.  You need the xhci-dwc3 diff I sent
> > earlier for that:
> >
> > https://patchwork.ozlabs.org/project/uboot/patch/20210916140009.59009-1-kettenis@openbsd.org/
> 
> Actually that seems to be applied in mainline now. Yes USB keyboard works.
> 
> It looks like the keyboard needs SPI and there is some sort of linux
> keyboard driver, but perhaps not for M1.

Yes.  It is certaily doable in u-boot, but not a priority.  I plan to
revisit this once I have a driver going in OpenBSD and a better
understanding of how the hardware works.

> > > Also it takes for ever to put a test version on the device...how are
> > > you doing that for development?
> >
> > If you install m1n1.macho without a payload, you can then use the
> > python scripts that come with m1n1 to upload kernels over serial.
> > There is a USB gadget implementation in m1n1, so you don't need a real
> > serial connection.  Just connect a Linux machine to the M1 Mac using a
> > USB cable and a USB serial device should show up on the Linux machine
> > once m1n1 is running on the Mac.  Set the M1N1DEVICE environment
> > variable to the right device name and run:
> >
> > $ python3 linux.py --compression=none u-boot-nodtb.bin t8103-j274.dtb
> 
> OK I see. I did try the USB serial thing but was missing the fact that
> U-Boot seems to kill it. So this works fine, thank you will await your
> next series. Any way to get U-Boot serial console going in the same
> way?

Probably, but the existing USB gadget code in u-boot doesn't seem to
implement USB serial so it would be a significant amount of work.  And
it would only work after you bring the USB controller up, so it
wouldn't be very useful for debugging purposes.

There is a real serial port, and if you have another M1 Mac it should
be fairly easy to access it:

https://github.com/AsahiLinux/docs/wiki/Developer-Quickstart#using-an-m1-machine

Otherwise you need to build some special hardware.

^ permalink raw reply	[flat|nested] 46+ messages in thread

* Re: [PATCH 0/5] Apple M1 Support
  2021-09-25 16:45           ` Mark Kettenis
@ 2021-09-26 15:53             ` Simon Glass
  2021-09-28  3:46               ` Simon Glass
  0 siblings, 1 reply; 46+ messages in thread
From: Simon Glass @ 2021-09-26 15:53 UTC (permalink / raw)
  To: Mark Kettenis
  Cc: Mark Kettenis, U-Boot Mailing List, Oliver Graute, Michael Walle,
	Anup Patel, Jonathan Balkind, Tianrui Wei, Padmarao Begari,
	Kishon Vijay Abraham I, Stephan Gerhold, Heinrich Schuchardt,
	Bin Meng, Asherah Connor, Michal Simek, Wasim Khan, Ye Li,
	Igor Opaniuk, Stefan Roese, Minkyu Kang, AKASHI Takahiro,
	Weijie Gao, Vabhav Sharma, Andy Shevchenko, Pratyush Yadav

Hi Mark,

On Sat, 25 Sept 2021 at 10:46, Mark Kettenis <mark.kettenis@xs4all.nl> wrote:
>
> > From: Simon Glass <sjg@chromium.org>
> > Date: Sat, 25 Sep 2021 08:42:30 -0600
> >
> > Hi Mark,
> >
> > On Sat, 25 Sept 2021 at 07:52, Mark Kettenis <mark.kettenis@xs4all.nl> wrote:
> > >
> > > > From: Simon Glass <sjg@chromium.org>
> > > > Date: Sat, 25 Sep 2021 07:27:41 -0600
> > > >
> > > > Hi Mark,
> > > >
> > > > On Sat, 25 Sept 2021 at 02:11, Mark Kettenis <mark.kettenis@xs4all.nl> wrote:
> > > > >
> > > > > > From: Simon Glass <sjg@chromium.org>
> > > > > > Date: Fri, 24 Sep 2021 19:20:32 -0600
> > > > > >
> > > > > > Hi Mark,
> > > > > >
> > > > > > On Sat, 18 Sept 2021 at 07:54, Mark Kettenis <kettenis@openbsd.org> wrote:
> > > > > > >
> > > > > > > This series adds basic support for Apple's M1 SoC to U-Boot.
> > > > > > > This builds a basic U-Boot that can be used as a payload
> > > > > > > for the m1n1 boot loader being developed by the Asahi Linux
> > > > > > > project.
> > > > > > >
> > > > > > > The goal here is to privide an UEFI interface on these machines that
> > > > > >
> > > > > > provide
> > > > > >
> > > > > > > allows booting various open source OSes.  This initial series provides
> > > > > > > support for the serial port, framebuffer and the USB 3.1 Type-C ports.
> > > > > > > It can boot a support OS (e.g. OpenBSD/arm64) from a USB disk.
> > > > > > >
> > > > > > > Mark Kettenis (5):
> > > > > > >   arm: apple: Add initial support for Apple's M1 SoC
> > > > > > >   serial: s5p: Add Apple M1 support
> > > > > > >   misc: Add Apple DART driver
> > > > > > >   arm: dts: apple: Add preliminary device trees
> > > > > > >   doc: board: apple: Add Apple M1 documentation
> > > > > > >
> > > > > > >  arch/arm/Kconfig                              |  22 +
> > > > > > >  arch/arm/Makefile                             |   1 +
> > > > > > >  arch/arm/dts/t8103-j274.dts                   | 135 +++++
> > > > > > >  arch/arm/dts/t8103-j293.dts                   |  97 ++++
> > > > > > >  arch/arm/dts/t8103.dtsi                       | 506 ++++++++++++++++++
> > > > > > >  arch/arm/include/asm/arch-m1/clk.h            |  11 +
> > > > > > >  arch/arm/include/asm/arch-m1/uart.h           |  41 ++
> > > > > > >  arch/arm/mach-apple/Kconfig                   |  18 +
> > > > > > >  arch/arm/mach-apple/Makefile                  |   4 +
> > > > > > >  arch/arm/mach-apple/board.c                   | 163 ++++++
> > > > > > >  arch/arm/mach-apple/lowlevel_init.S           |  16 +
> > > > > > >  configs/apple_m1_defconfig                    |  14 +
> > > > > > >  doc/board/apple/index.rst                     |   9 +
> > > > > > >  doc/board/apple/m1.rst                        |  54 ++
> > > > > > >  doc/board/index.rst                           |   1 +
> > > > > > >  drivers/misc/Kconfig                          |   7 +
> > > > > > >  drivers/misc/Makefile                         |   1 +
> > > > > > >  drivers/misc/apple_dart.c                     | 171 ++++++
> > > > > > >  drivers/serial/Kconfig                        |   2 +-
> > > > > > >  drivers/serial/serial_s5p.c                   |  22 +
> > > > > > >  include/configs/apple.h                       |  38 ++
> > > > > > >  .../interrupt-controller/apple-aic.h          |  15 +
> > > > > > >  include/dt-bindings/pinctrl/apple.h           |  13 +
> > > > > > >  include/dt-bindings/spmi/spmi.h               |  10 +
> > > > > > >  24 files changed, 1370 insertions(+), 1 deletion(-)
> > > > > > >  create mode 100644 arch/arm/dts/t8103-j274.dts
> > > > > > >  create mode 100644 arch/arm/dts/t8103-j293.dts
> > > > > > >  create mode 100644 arch/arm/dts/t8103.dtsi
> > > > > > >  create mode 100644 arch/arm/include/asm/arch-m1/clk.h
> > > > > > >  create mode 100644 arch/arm/include/asm/arch-m1/uart.h
> > > > > > >  create mode 100644 arch/arm/mach-apple/Kconfig
> > > > > > >  create mode 100644 arch/arm/mach-apple/Makefile
> > > > > > >  create mode 100644 arch/arm/mach-apple/board.c
> > > > > > >  create mode 100644 arch/arm/mach-apple/lowlevel_init.S
> > > > > > >  create mode 100644 configs/apple_m1_defconfig
> > > > > > >  create mode 100644 doc/board/apple/index.rst
> > > > > > >  create mode 100644 doc/board/apple/m1.rst
> > > > > > >  create mode 100644 drivers/misc/apple_dart.c
> > > > > > >  create mode 100644 include/configs/apple.h
> > > > > > >  create mode 100644 include/dt-bindings/interrupt-controller/apple-aic.h
> > > > > > >  create mode 100644 include/dt-bindings/pinctrl/apple.h
> > > > > > >  create mode 100644 include/dt-bindings/spmi/spmi.h
> > > > > > >
> > > > > > > --
> > > > > > > 2.33.0
> > > > > > >
> > > > > >
> > > > > > I gave this a whirl on a Macbook Air A2337 and needed the patch below
> > > > > > to build the devicetree files. Sorry the formatting is broken.
> > > > > >
> > > > > > Also when booting I get this:
> > > > > >
> > > > > > ...
> > > > > > Preparing to boot kernel at 0x808200000 with fdt at 0x8082e8000
> > > > > > Valid payload found
> > > > > > Preparing to run next stage at 0x808200000...
> > > > > > MMU: shutting down...
> > > > > > MMU: shutdown successful, clearing caches
> > > > > >
> > > > > >
> > > > > > Then the display clears and it hangs. If I try the J274 devicetree it
> > > > > > just reboots at that point.
> > > > > >
> > > > > > What should I expect? I was hoping for console output as I don't have
> > > > > > serial connected. I don't have a suitable serial cable, and the USB
> > > > > > gadget mode did not result in a ttyACM0 device appearing.
> > > > >
> > > > > For framebuffer support you also need the "30bpp framebuffer support"
> > > > > series I posted earlier:
> > > > >
> > > > > https://patchwork.ozlabs.org/project/uboot/list/?series=262617
> > > > >
> > > > > With that your should get the usual U-Boot output on the screen.  I've
> > > > > not tested the Air, but it should work there.
> > > >
> > > > Ah OK, yes that fixes it, thanks!
> > > >
> > > > So how do I get the keyboard to work in U-Boot? Or are you using
> > > > serial somehow?
> > >
> > > The laptop keyboard doesn't work yet, so I'm using a USB keyboard when
> > > I'm not using a serial console.  You need the xhci-dwc3 diff I sent
> > > earlier for that:
> > >
> > > https://patchwork.ozlabs.org/project/uboot/patch/20210916140009.59009-1-kettenis@openbsd.org/
> >
> > Actually that seems to be applied in mainline now. Yes USB keyboard works.
> >
> > It looks like the keyboard needs SPI and there is some sort of linux
> > keyboard driver, but perhaps not for M1.
>
> Yes.  It is certaily doable in u-boot, but not a priority.  I plan to
> revisit this once I have a driver going in OpenBSD and a better
> understanding of how the hardware works.

Makes sense.

>
> > > > Also it takes for ever to put a test version on the device...how are
> > > > you doing that for development?
> > >
> > > If you install m1n1.macho without a payload, you can then use the
> > > python scripts that come with m1n1 to upload kernels over serial.
> > > There is a USB gadget implementation in m1n1, so you don't need a real
> > > serial connection.  Just connect a Linux machine to the M1 Mac using a
> > > USB cable and a USB serial device should show up on the Linux machine
> > > once m1n1 is running on the Mac.  Set the M1N1DEVICE environment
> > > variable to the right device name and run:
> > >
> > > $ python3 linux.py --compression=none u-boot-nodtb.bin t8103-j274.dtb
> >
> > OK I see. I did try the USB serial thing but was missing the fact that
> > U-Boot seems to kill it. So this works fine, thank you will await your
> > next series. Any way to get U-Boot serial console going in the same
> > way?
>
> Probably, but the existing USB gadget code in u-boot doesn't seem to
> implement USB serial so it would be a significant amount of work.  And
> it would only work after you bring the USB controller up, so it
> wouldn't be very useful for debugging purposes.

Yse, usbtty.c is very old and doesn't even use driver model, so would
need a refresh.

>
> There is a real serial port, and if you have another M1 Mac it should
> be fairly easy to access it:
>
> https://github.com/AsahiLinux/docs/wiki/Developer-Quickstart#using-an-m1-machine
>
> Otherwise you need to build some special hardware.

Yes I saw that but I only have one. Will see if I can steal/find another.

Regards,
Simon

^ permalink raw reply	[flat|nested] 46+ messages in thread

* Re: [PATCH 3/5] misc: Add Apple DART driver
  2021-09-21  1:11       ` Simon Glass
  2021-09-25 13:27         ` Simon Glass
@ 2021-09-26 20:53         ` Mark Kettenis
  2021-09-27 20:14           ` Simon Glass
  1 sibling, 1 reply; 46+ messages in thread
From: Mark Kettenis @ 2021-09-26 20:53 UTC (permalink / raw)
  To: Simon Glass
  Cc: kettenis, u-boot, oliver.graute, stephan, masami.hiramatsu,
	priyanka.jain, ycliang, padmarao.begari, michael, kishon,
	xypron.glpk, bin.meng, ashe, michal.simek, wasim.khan, hs,
	igor.opaniuk, ye.li, sr, takahiro.akashi, weijie.gao,
	vabhav.sharma, andriy.shevchenko, p.yadav

> From: Simon Glass <sjg@chromium.org>
> Date: Mon, 20 Sep 2021 19:11:25 -0600

Hi Simon,

> [..]
> 
> > > > +static int apple_dart_bind(struct udevice *dev)
> > > > +{
> > > > +       void *base;
> > > > +       int sid, i;
> > > > +
> > > > +       base = dev_read_addr_ptr(dev);
> > > > +       if (!base)
> > > > +               return -EINVAL;
> > > > +
> > > > +       u32 params2 = readl(base + DART_PARAMS2);
> > > > +       if (params2 & DART_PARAMS2_BYPASS_SUPPORT) {
> > > > +               for (sid = 0; sid < 16; sid++) {
> > > > +                       writel(DART_TCR_BYPASS_DART | DART_TCR_BYPASS_DAPF,
> > > > +                              base + DART_TCR(sid));
> > > > +                       for (i = 0; i < 4; i++)
> > > > +                               writel(0, base + DART_TTBR(sid, i));
> > > > +               }
> > > > +       }
> > >
> > > Not allowed hardware access in bind(). Can this more to probe() ?
> >
> > Well, I need to make sure that this happens before other drivers get
> > probed (in particular the xhci-dwc3 driver).  Is there a better
> > mechanism to achieve that?
> 
> If those drivers have something in the DT indicating that they need
> this, then you can add a uclass_get_device_by_phandle() in those
> drivers.

Yes, there is an "iommus" property that points at the IOMMU.  This is
a standard property and I think it would make sense to have the core
device probing code handle it in a way similar to how "power-domains"
is handled.  That way we don't have to add IOMMU hooks into each and
every driver.

> If not, then you can probe all the DART devices with uclass_probe_all().
> 
> Having said that, I see you are using UCLASS_MISC. I suspect this
> should have its own UCLASS_IOMMU.

So here is a proof-of-concept diff to add UCLASS_IOMMU.  This
deliberately does not yet introduce driver ops yet; coming up with
something sensible there needs a bit more thought.  For USB support
all I need is for the probe function to put the IOMMU in bypass mode,
so that is what's implemented here.

Does this look reasonable?  I'll split this up eventually into a
commit that adds UCLASS_IOMMU and a commit that adds the apple_dart
driver.



commit 606979a32d8e0d19ee45df97ad6855c24e27e5ad
Author: Mark Kettenis <kettenis@openbsd.org>
Date:   Sun Sep 26 22:35:30 2021 +0200

    iommu: Proof of concept

diff --git a/drivers/Kconfig b/drivers/Kconfig
index 417d6f88c2..b26ca8cf70 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -50,6 +50,8 @@ source "drivers/i2c/Kconfig"
 
 source "drivers/input/Kconfig"
 
+source "drivers/iommu/Kconfig"
+
 source "drivers/led/Kconfig"
 
 source "drivers/mailbox/Kconfig"
diff --git a/drivers/Makefile b/drivers/Makefile
index fd218c9056..166aeb9817 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -109,6 +109,7 @@ obj-y += mtd/
 obj-y += pwm/
 obj-y += reset/
 obj-y += input/
+obj-y += iommu/
 # SOC specific infrastructure drivers.
 obj-y += smem/
 obj-y += thermal/
diff --git a/drivers/core/device.c b/drivers/core/device.c
index 29668f6fb3..5f480ad443 100644
--- a/drivers/core/device.c
+++ b/drivers/core/device.c
@@ -28,6 +28,7 @@
 #include <dm/uclass.h>
 #include <dm/uclass-internal.h>
 #include <dm/util.h>
+#include <iommu.h>
 #include <linux/err.h>
 #include <linux/list.h>
 #include <power-domain.h>
@@ -543,6 +544,13 @@ int device_probe(struct udevice *dev)
 			goto fail;
 	}
 
+	if (CONFIG_IS_ENABLED(IOMMU) && dev->parent &&
+	    (device_get_uclass_id(dev) != UCLASS_IOMMU)) {
+		ret = dev_iommu_probe(dev);
+		if (ret)
+			goto fail;
+	}
+
 	ret = device_get_dma_constraints(dev);
 	if (ret)
 		goto fail;
diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
new file mode 100644
index 0000000000..d0638140af
--- /dev/null
+++ b/drivers/iommu/Kconfig
@@ -0,0 +1,20 @@
+#
+# IOMMU devices
+#
+
+menu "IOMMU device drivers"
+
+config IOMMU
+	bool "Enable Driver Model for IOMMU drivers"
+	depends on DM
+	help
+	  Enable driver model for IOMMU devices.
+
+config APPLE_DART
+	bool "Apple DART support"
+	depends on IOMMU && ARCH_APPLE
+	default y
+	help
+	  Enable support for the DART on Apple SoCs.
+
+endmenu
diff --git a/drivers/iommu/Makefile b/drivers/iommu/Makefile
new file mode 100644
index 0000000000..8a50e3aba8
--- /dev/null
+++ b/drivers/iommu/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0+
+
+obj-$(CONFIG_IOMMU) += iommu-uclass.o
+
+obj-$(CONFIG_APPLE_DART) += apple_dart.o
diff --git a/drivers/iommu/apple_dart.c b/drivers/iommu/apple_dart.c
new file mode 100644
index 0000000000..ff8c5fa62c
--- /dev/null
+++ b/drivers/iommu/apple_dart.c
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2021 Mark Kettenis <kettenis@openbsd.org>
+ */
+
+#include <common.h>
+#include <cpu_func.h>
+#include <dm.h>
+#include <asm/io.h>
+
+#define DART_PARAMS2		0x0004
+#define  DART_PARAMS2_BYPASS_SUPPORT	BIT(0)
+#define DART_TLB_OP		0x0020
+#define  DART_TLB_OP_OPMASK	(0xfff << 20)
+#define  DART_TLB_OP_FLUSH	(0x001 << 20)
+#define  DART_TLB_OP_BUSY	BIT(2)
+#define DART_TLB_OP_SIDMASK	0x0034
+#define DART_ERROR_STATUS	0x0040
+#define DART_TCR(sid)		(0x0100 + 4 * (sid))
+#define  DART_TCR_TRANSLATE_ENABLE	BIT(7)
+#define  DART_TCR_BYPASS_DART		BIT(8)
+#define  DART_TCR_BYPASS_DAPF		BIT(12)
+#define DART_TTBR(sid, idx)	(0x0200 + 16 * (sid) + 4 * (idx))
+#define  DART_TTBR_VALID	BIT(31)
+#define  DART_TTBR_SHIFT	12
+
+static int apple_dart_probe(struct udevice *dev)
+{
+	void *base;
+	int sid, i;
+
+	base = dev_read_addr_ptr(dev);
+	if (!base)
+		return -EINVAL;
+
+	u32 params2 = readl(base + DART_PARAMS2);
+	if (params2 & DART_PARAMS2_BYPASS_SUPPORT) {
+		for (sid = 0; sid < 16; sid++) {
+			writel(DART_TCR_BYPASS_DART | DART_TCR_BYPASS_DAPF,
+			       base + DART_TCR(sid));
+			for (i = 0; i < 4; i++)
+				writel(0, base + DART_TTBR(sid, i));
+		}
+	}
+
+	return 0;
+}
+
+static const struct udevice_id apple_dart_ids[] = {
+	{ .compatible = "apple,t8103-dart" },
+	{ /* sentinel */ }
+};
+
+U_BOOT_DRIVER(apple_dart) = {
+	.name = "apple_dart",
+	.id = UCLASS_IOMMU,
+	.of_match = apple_dart_ids,
+	.probe = apple_dart_probe
+};
diff --git a/drivers/iommu/iommu-uclass.c b/drivers/iommu/iommu-uclass.c
new file mode 100644
index 0000000000..5c55df3066
--- /dev/null
+++ b/drivers/iommu/iommu-uclass.c
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2021 Mark Kettenis <kettenis@openbsd.org>
+ */
+
+#define LOG_CATEGORY UCLASS_IOMMU
+
+#include <common.h>
+#include <dm.h>
+
+#if (CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA))
+int dev_iommu_probe(struct udevice *dev)
+{
+	struct ofnode_phandle_args args;
+	struct udevice *dev_iommu;
+	int i, count, ret = 0;
+
+	count = dev_count_phandle_with_args(dev, "iommus",
+					    "#iommu-cells", 0);
+	for (i = 0; i < count; i++) {
+		ret = dev_read_phandle_with_args(dev, "iommus",
+						 "#iommu-cells", 0, i, &args);
+		if (ret) {
+			debug("%s: dev_read_phandle_with_args failed: %d\n",
+			      __func__, ret);
+			return ret;
+		}
+
+		ret = uclass_get_device_by_ofnode(UCLASS_IOMMU, args.node,
+						  &dev_iommu);
+		if (ret) {
+			debug("%s: uclass_get_device_by_ofnode failed: %d\n",
+			      __func__, ret);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+#endif
+
+UCLASS_DRIVER(iommu) = {
+	.id		= UCLASS_IOMMU,
+	.name		= "iommu",
+};
diff --git a/include/dm/uclass-id.h b/include/dm/uclass-id.h
index e7edd409f3..56aa981613 100644
--- a/include/dm/uclass-id.h
+++ b/include/dm/uclass-id.h
@@ -61,6 +61,7 @@ enum uclass_id {
 	UCLASS_I2C_MUX,		/* I2C multiplexer */
 	UCLASS_I2S,		/* I2S bus */
 	UCLASS_IDE,		/* IDE device */
+	UCLASS_IOMMU,		/* IOMMU */
 	UCLASS_IRQ,		/* Interrupt controller */
 	UCLASS_KEYBOARD,	/* Keyboard input device */
 	UCLASS_LED,		/* Light-emitting diode (LED) */

^ permalink raw reply related	[flat|nested] 46+ messages in thread

* Re: [PATCH 3/5] misc: Add Apple DART driver
  2021-09-26 20:53         ` Mark Kettenis
@ 2021-09-27 20:14           ` Simon Glass
  0 siblings, 0 replies; 46+ messages in thread
From: Simon Glass @ 2021-09-27 20:14 UTC (permalink / raw)
  To: Mark Kettenis
  Cc: Mark Kettenis, U-Boot Mailing List, Oliver Graute,
	Stephan Gerhold, Masami Hiramatsu, Priyanka Jain, Leo Liang,
	Padmarao Begari, Michael Walle, Kishon Vijay Abraham I,
	Heinrich Schuchardt, Bin Meng, Asherah Connor, Michal Simek,
	Wasim Khan, Heiko Schocher, Igor Opaniuk, Ye Li, Stefan Roese,
	AKASHI Takahiro, Weijie Gao, Vabhav Sharma, Andy Shevchenko,
	Pratyush Yadav

Hi Mark,

On Sun, 26 Sept 2021 at 14:53, Mark Kettenis <mark.kettenis@xs4all.nl> wrote:
>
> > From: Simon Glass <sjg@chromium.org>
> > Date: Mon, 20 Sep 2021 19:11:25 -0600
>
> Hi Simon,
>
> > [..]
> >
> > > > > +static int apple_dart_bind(struct udevice *dev)
> > > > > +{
> > > > > +       void *base;
> > > > > +       int sid, i;
> > > > > +
> > > > > +       base = dev_read_addr_ptr(dev);
> > > > > +       if (!base)
> > > > > +               return -EINVAL;
> > > > > +
> > > > > +       u32 params2 = readl(base + DART_PARAMS2);
> > > > > +       if (params2 & DART_PARAMS2_BYPASS_SUPPORT) {
> > > > > +               for (sid = 0; sid < 16; sid++) {
> > > > > +                       writel(DART_TCR_BYPASS_DART | DART_TCR_BYPASS_DAPF,
> > > > > +                              base + DART_TCR(sid));
> > > > > +                       for (i = 0; i < 4; i++)
> > > > > +                               writel(0, base + DART_TTBR(sid, i));
> > > > > +               }
> > > > > +       }
> > > >
> > > > Not allowed hardware access in bind(). Can this more to probe() ?
> > >
> > > Well, I need to make sure that this happens before other drivers get
> > > probed (in particular the xhci-dwc3 driver).  Is there a better
> > > mechanism to achieve that?
> >
> > If those drivers have something in the DT indicating that they need
> > this, then you can add a uclass_get_device_by_phandle() in those
> > drivers.
>
> Yes, there is an "iommus" property that points at the IOMMU.  This is
> a standard property and I think it would make sense to have the core
> device probing code handle it in a way similar to how "power-domains"
> is handled.  That way we don't have to add IOMMU hooks into each and
> every driver.

OK.

>
> > If not, then you can probe all the DART devices with uclass_probe_all().
> >
> > Having said that, I see you are using UCLASS_MISC. I suspect this
> > should have its own UCLASS_IOMMU.
>
> So here is a proof-of-concept diff to add UCLASS_IOMMU.  This
> deliberately does not yet introduce driver ops yet; coming up with
> something sensible there needs a bit more thought.  For USB support
> all I need is for the probe function to put the IOMMU in bypass mode,
> so that is what's implemented here.
>
> Does this look reasonable?  I'll split this up eventually into a
> commit that adds UCLASS_IOMMU and a commit that adds the apple_dart
> driver.

Yes from a quick look. Remember for the IOMMU uclass to add a sandbox
test, even though for now it will only probe the driver since there
are no ops.

Also you don't need the #if in iommu-uclass.c as the linked will
garbage-collect it.

Regards,
Simon

^ permalink raw reply	[flat|nested] 46+ messages in thread

* Re: [PATCH 0/5] Apple M1 Support
  2021-09-26 15:53             ` Simon Glass
@ 2021-09-28  3:46               ` Simon Glass
  2021-09-28  7:36                 ` Mark Kettenis
  0 siblings, 1 reply; 46+ messages in thread
From: Simon Glass @ 2021-09-28  3:46 UTC (permalink / raw)
  To: Mark Kettenis
  Cc: Mark Kettenis, U-Boot Mailing List, Oliver Graute, Michael Walle,
	Anup Patel, Jonathan Balkind, Tianrui Wei, Padmarao Begari,
	Kishon Vijay Abraham I, Stephan Gerhold, Heinrich Schuchardt,
	Bin Meng, Asherah Connor, Michal Simek, Wasim Khan, Ye Li,
	Igor Opaniuk, Stefan Roese, Minkyu Kang, AKASHI Takahiro,
	Weijie Gao, Vabhav Sharma, Andy Shevchenko, Pratyush Yadav

Hi Mark,

On Sun, 26 Sept 2021 at 09:53, Simon Glass <sjg@chromium.org> wrote:
>
> Hi Mark,
>
> On Sat, 25 Sept 2021 at 10:46, Mark Kettenis <mark.kettenis@xs4all.nl> wrote:
> >
> > > From: Simon Glass <sjg@chromium.org>
> > > Date: Sat, 25 Sep 2021 08:42:30 -0600
> > >
> > > Hi Mark,
> > >
> > > On Sat, 25 Sept 2021 at 07:52, Mark Kettenis <mark.kettenis@xs4all.nl> wrote:
> > > >
> > > > > From: Simon Glass <sjg@chromium.org>
> > > > > Date: Sat, 25 Sep 2021 07:27:41 -0600
> > > > >
> > > > > Hi Mark,
> > > > >
> > > > > On Sat, 25 Sept 2021 at 02:11, Mark Kettenis <mark.kettenis@xs4all.nl> wrote:
> > > > > >
> > > > > > > From: Simon Glass <sjg@chromium.org>
> > > > > > > Date: Fri, 24 Sep 2021 19:20:32 -0600
> > > > > > >
> > > > > > > Hi Mark,
> > > > > > >
> > > > > > > On Sat, 18 Sept 2021 at 07:54, Mark Kettenis <kettenis@openbsd.org> wrote:
> > > > > > > >
> > > > > > > > This series adds basic support for Apple's M1 SoC to U-Boot.
> > > > > > > > This builds a basic U-Boot that can be used as a payload
> > > > > > > > for the m1n1 boot loader being developed by the Asahi Linux
> > > > > > > > project.
> > > > > > > >
> > > > > > > > The goal here is to privide an UEFI interface on these machines that
> > > > > > >
> > > > > > > provide
> > > > > > >
> > > > > > > > allows booting various open source OSes.  This initial series provides
> > > > > > > > support for the serial port, framebuffer and the USB 3.1 Type-C ports.
> > > > > > > > It can boot a support OS (e.g. OpenBSD/arm64) from a USB disk.
> > > > > > > >
> > > > > > > > Mark Kettenis (5):
> > > > > > > >   arm: apple: Add initial support for Apple's M1 SoC
> > > > > > > >   serial: s5p: Add Apple M1 support
> > > > > > > >   misc: Add Apple DART driver
> > > > > > > >   arm: dts: apple: Add preliminary device trees
> > > > > > > >   doc: board: apple: Add Apple M1 documentation
> > > > > > > >
> > > > > > > >  arch/arm/Kconfig                              |  22 +
> > > > > > > >  arch/arm/Makefile                             |   1 +
> > > > > > > >  arch/arm/dts/t8103-j274.dts                   | 135 +++++
> > > > > > > >  arch/arm/dts/t8103-j293.dts                   |  97 ++++
> > > > > > > >  arch/arm/dts/t8103.dtsi                       | 506 ++++++++++++++++++
> > > > > > > >  arch/arm/include/asm/arch-m1/clk.h            |  11 +
> > > > > > > >  arch/arm/include/asm/arch-m1/uart.h           |  41 ++
> > > > > > > >  arch/arm/mach-apple/Kconfig                   |  18 +
> > > > > > > >  arch/arm/mach-apple/Makefile                  |   4 +
> > > > > > > >  arch/arm/mach-apple/board.c                   | 163 ++++++
> > > > > > > >  arch/arm/mach-apple/lowlevel_init.S           |  16 +
> > > > > > > >  configs/apple_m1_defconfig                    |  14 +
> > > > > > > >  doc/board/apple/index.rst                     |   9 +
> > > > > > > >  doc/board/apple/m1.rst                        |  54 ++
> > > > > > > >  doc/board/index.rst                           |   1 +
> > > > > > > >  drivers/misc/Kconfig                          |   7 +
> > > > > > > >  drivers/misc/Makefile                         |   1 +
> > > > > > > >  drivers/misc/apple_dart.c                     | 171 ++++++
> > > > > > > >  drivers/serial/Kconfig                        |   2 +-
> > > > > > > >  drivers/serial/serial_s5p.c                   |  22 +
> > > > > > > >  include/configs/apple.h                       |  38 ++
> > > > > > > >  .../interrupt-controller/apple-aic.h          |  15 +
> > > > > > > >  include/dt-bindings/pinctrl/apple.h           |  13 +
> > > > > > > >  include/dt-bindings/spmi/spmi.h               |  10 +
> > > > > > > >  24 files changed, 1370 insertions(+), 1 deletion(-)
> > > > > > > >  create mode 100644 arch/arm/dts/t8103-j274.dts
> > > > > > > >  create mode 100644 arch/arm/dts/t8103-j293.dts
> > > > > > > >  create mode 100644 arch/arm/dts/t8103.dtsi
> > > > > > > >  create mode 100644 arch/arm/include/asm/arch-m1/clk.h
> > > > > > > >  create mode 100644 arch/arm/include/asm/arch-m1/uart.h
> > > > > > > >  create mode 100644 arch/arm/mach-apple/Kconfig
> > > > > > > >  create mode 100644 arch/arm/mach-apple/Makefile
> > > > > > > >  create mode 100644 arch/arm/mach-apple/board.c
> > > > > > > >  create mode 100644 arch/arm/mach-apple/lowlevel_init.S
> > > > > > > >  create mode 100644 configs/apple_m1_defconfig
> > > > > > > >  create mode 100644 doc/board/apple/index.rst
> > > > > > > >  create mode 100644 doc/board/apple/m1.rst
> > > > > > > >  create mode 100644 drivers/misc/apple_dart.c
> > > > > > > >  create mode 100644 include/configs/apple.h
> > > > > > > >  create mode 100644 include/dt-bindings/interrupt-controller/apple-aic.h
> > > > > > > >  create mode 100644 include/dt-bindings/pinctrl/apple.h
> > > > > > > >  create mode 100644 include/dt-bindings/spmi/spmi.h
> > > > > > > >
> > > > > > > > --
> > > > > > > > 2.33.0
> > > > > > > >
> > > > > > >
> > > > > > > I gave this a whirl on a Macbook Air A2337 and needed the patch below
> > > > > > > to build the devicetree files. Sorry the formatting is broken.
> > > > > > >
> > > > > > > Also when booting I get this:
> > > > > > >
> > > > > > > ...
> > > > > > > Preparing to boot kernel at 0x808200000 with fdt at 0x8082e8000
> > > > > > > Valid payload found
> > > > > > > Preparing to run next stage at 0x808200000...
> > > > > > > MMU: shutting down...
> > > > > > > MMU: shutdown successful, clearing caches
> > > > > > >
> > > > > > >
> > > > > > > Then the display clears and it hangs. If I try the J274 devicetree it
> > > > > > > just reboots at that point.
> > > > > > >
> > > > > > > What should I expect? I was hoping for console output as I don't have
> > > > > > > serial connected. I don't have a suitable serial cable, and the USB
> > > > > > > gadget mode did not result in a ttyACM0 device appearing.
> > > > > >
> > > > > > For framebuffer support you also need the "30bpp framebuffer support"
> > > > > > series I posted earlier:
> > > > > >
> > > > > > https://patchwork.ozlabs.org/project/uboot/list/?series=262617
> > > > > >
> > > > > > With that your should get the usual U-Boot output on the screen.  I've
> > > > > > not tested the Air, but it should work there.
> > > > >
> > > > > Ah OK, yes that fixes it, thanks!
> > > > >
> > > > > So how do I get the keyboard to work in U-Boot? Or are you using
> > > > > serial somehow?
> > > >
> > > > The laptop keyboard doesn't work yet, so I'm using a USB keyboard when
> > > > I'm not using a serial console.  You need the xhci-dwc3 diff I sent
> > > > earlier for that:
> > > >
> > > > https://patchwork.ozlabs.org/project/uboot/patch/20210916140009.59009-1-kettenis@openbsd.org/
> > >
> > > Actually that seems to be applied in mainline now. Yes USB keyboard works.
> > >
> > > It looks like the keyboard needs SPI and there is some sort of linux
> > > keyboard driver, but perhaps not for M1.
> >
> > Yes.  It is certaily doable in u-boot, but not a priority.  I plan to
> > revisit this once I have a driver going in OpenBSD and a better
> > understanding of how the hardware works.
>
> Makes sense.
>
> >
> > > > > Also it takes for ever to put a test version on the device...how are
> > > > > you doing that for development?
> > > >
> > > > If you install m1n1.macho without a payload, you can then use the
> > > > python scripts that come with m1n1 to upload kernels over serial.
> > > > There is a USB gadget implementation in m1n1, so you don't need a real
> > > > serial connection.  Just connect a Linux machine to the M1 Mac using a
> > > > USB cable and a USB serial device should show up on the Linux machine
> > > > once m1n1 is running on the Mac.  Set the M1N1DEVICE environment
> > > > variable to the right device name and run:
> > > >
> > > > $ python3 linux.py --compression=none u-boot-nodtb.bin t8103-j274.dtb
> > >
> > > OK I see. I did try the USB serial thing but was missing the fact that
> > > U-Boot seems to kill it. So this works fine, thank you will await your
> > > next series. Any way to get U-Boot serial console going in the same
> > > way?
> >
> > Probably, but the existing USB gadget code in u-boot doesn't seem to
> > implement USB serial so it would be a significant amount of work.  And
> > it would only work after you bring the USB controller up, so it
> > wouldn't be very useful for debugging purposes.
>
> Yse, usbtty.c is very old and doesn't even use driver model, so would
> need a refresh.
>
> >
> > There is a real serial port, and if you have another M1 Mac it should
> > be fairly easy to access it:
> >
> > https://github.com/AsahiLinux/docs/wiki/Developer-Quickstart#using-an-m1-machine
> >
> > Otherwise you need to build some special hardware.
>
> Yes I saw that but I only have one. Will see if I can steal/find another.

OK got a mini as a DUT. It works so far as running macvdmtool on the
Air and I can see the /dev/cu.debug-console device, but don't see any
serial output when I reboot the DUT. The display works fine, although
the USB keyboard only works on the USB-C ports of the mini, not the
USB-A ones.

Do you use 'screen /dev/cu.debug-console' or something else? I have a
cable with SS on it: This is what I see on the air.

sudo ./macvdmtool reboot serial
Mac type: J313AP
Looking for HPM devices...
Found: IOService:/AppleARMPE/arm-io@10F00000/AppleT810xIO/i2c0@35010000/AppleS5L8940XI2CController/hpmBusManager@6B/AppleHPMBusController/hpm0/AppleHPMARM
Connection: Sink
Status: APP
Unlocking... OK
Entering DBMa mode... Status: DBMa
Rebooting target into normal mode... OK
Waiting for connection........ Connected
Putting target into serial mode... OK
Putting local end into serial mode... OK
Exiting DBMa mode... OK
sglass@Simons-MacBook-Air macvdmtool

So it seems to be connected but I am not seeing serial output from
m1n1 or U-Boot.

Regards,
Simon

^ permalink raw reply	[flat|nested] 46+ messages in thread

* Re: [PATCH 0/5] Apple M1 Support
  2021-09-28  3:46               ` Simon Glass
@ 2021-09-28  7:36                 ` Mark Kettenis
  2021-09-28 12:07                   ` Simon Glass
  0 siblings, 1 reply; 46+ messages in thread
From: Mark Kettenis @ 2021-09-28  7:36 UTC (permalink / raw)
  To: Simon Glass
  Cc: kettenis, u-boot, oliver.graute, michael, anup.patel, jbalkind,
	tianrui-wei, padmarao.begari, kishon, stephan, xypron.glpk,
	bin.meng, ashe, michal.simek, wasim.khan, ye.li, igor.opaniuk,
	sr, mk7.kang, takahiro.akashi, weijie.gao, vabhav.sharma,
	andriy.shevchenko, p.yadav

> From: Simon Glass <sjg@chromium.org>
> Date: Mon, 27 Sep 2021 21:46:56 -0600
> 
> Hi Mark,
> 
> On Sun, 26 Sept 2021 at 09:53, Simon Glass <sjg@chromium.org> wrote:
> >
> > Hi Mark,
> >
> > On Sat, 25 Sept 2021 at 10:46, Mark Kettenis <mark.kettenis@xs4all.nl> wrote:
> > >
> > > > From: Simon Glass <sjg@chromium.org>
> > > > Date: Sat, 25 Sep 2021 08:42:30 -0600
> > > >
> > > > Hi Mark,
> > > >
> > > > On Sat, 25 Sept 2021 at 07:52, Mark Kettenis <mark.kettenis@xs4all.nl> wrote:
> > > > >
> > > > > > From: Simon Glass <sjg@chromium.org>
> > > > > > Date: Sat, 25 Sep 2021 07:27:41 -0600
> > > > > >
> > > > > > Hi Mark,
> > > > > >
> > > > > > On Sat, 25 Sept 2021 at 02:11, Mark Kettenis <mark.kettenis@xs4all.nl> wrote:
> > > > > > >
> > > > > > > > From: Simon Glass <sjg@chromium.org>
> > > > > > > > Date: Fri, 24 Sep 2021 19:20:32 -0600
> > > > > > > >
> > > > > > > > Hi Mark,
> > > > > > > >
> > > > > > > > On Sat, 18 Sept 2021 at 07:54, Mark Kettenis <kettenis@openbsd.org> wrote:
> > > > > > > > >
> > > > > > > > > This series adds basic support for Apple's M1 SoC to U-Boot.
> > > > > > > > > This builds a basic U-Boot that can be used as a payload
> > > > > > > > > for the m1n1 boot loader being developed by the Asahi Linux
> > > > > > > > > project.
> > > > > > > > >
> > > > > > > > > The goal here is to privide an UEFI interface on these machines that
> > > > > > > >
> > > > > > > > provide
> > > > > > > >
> > > > > > > > > allows booting various open source OSes.  This initial series provides
> > > > > > > > > support for the serial port, framebuffer and the USB 3.1 Type-C ports.
> > > > > > > > > It can boot a support OS (e.g. OpenBSD/arm64) from a USB disk.
> > > > > > > > >
> > > > > > > > > Mark Kettenis (5):
> > > > > > > > >   arm: apple: Add initial support for Apple's M1 SoC
> > > > > > > > >   serial: s5p: Add Apple M1 support
> > > > > > > > >   misc: Add Apple DART driver
> > > > > > > > >   arm: dts: apple: Add preliminary device trees
> > > > > > > > >   doc: board: apple: Add Apple M1 documentation
> > > > > > > > >
> > > > > > > > >  arch/arm/Kconfig                              |  22 +
> > > > > > > > >  arch/arm/Makefile                             |   1 +
> > > > > > > > >  arch/arm/dts/t8103-j274.dts                   | 135 +++++
> > > > > > > > >  arch/arm/dts/t8103-j293.dts                   |  97 ++++
> > > > > > > > >  arch/arm/dts/t8103.dtsi                       | 506 ++++++++++++++++++
> > > > > > > > >  arch/arm/include/asm/arch-m1/clk.h            |  11 +
> > > > > > > > >  arch/arm/include/asm/arch-m1/uart.h           |  41 ++
> > > > > > > > >  arch/arm/mach-apple/Kconfig                   |  18 +
> > > > > > > > >  arch/arm/mach-apple/Makefile                  |   4 +
> > > > > > > > >  arch/arm/mach-apple/board.c                   | 163 ++++++
> > > > > > > > >  arch/arm/mach-apple/lowlevel_init.S           |  16 +
> > > > > > > > >  configs/apple_m1_defconfig                    |  14 +
> > > > > > > > >  doc/board/apple/index.rst                     |   9 +
> > > > > > > > >  doc/board/apple/m1.rst                        |  54 ++
> > > > > > > > >  doc/board/index.rst                           |   1 +
> > > > > > > > >  drivers/misc/Kconfig                          |   7 +
> > > > > > > > >  drivers/misc/Makefile                         |   1 +
> > > > > > > > >  drivers/misc/apple_dart.c                     | 171 ++++++
> > > > > > > > >  drivers/serial/Kconfig                        |   2 +-
> > > > > > > > >  drivers/serial/serial_s5p.c                   |  22 +
> > > > > > > > >  include/configs/apple.h                       |  38 ++
> > > > > > > > >  .../interrupt-controller/apple-aic.h          |  15 +
> > > > > > > > >  include/dt-bindings/pinctrl/apple.h           |  13 +
> > > > > > > > >  include/dt-bindings/spmi/spmi.h               |  10 +
> > > > > > > > >  24 files changed, 1370 insertions(+), 1 deletion(-)
> > > > > > > > >  create mode 100644 arch/arm/dts/t8103-j274.dts
> > > > > > > > >  create mode 100644 arch/arm/dts/t8103-j293.dts
> > > > > > > > >  create mode 100644 arch/arm/dts/t8103.dtsi
> > > > > > > > >  create mode 100644 arch/arm/include/asm/arch-m1/clk.h
> > > > > > > > >  create mode 100644 arch/arm/include/asm/arch-m1/uart.h
> > > > > > > > >  create mode 100644 arch/arm/mach-apple/Kconfig
> > > > > > > > >  create mode 100644 arch/arm/mach-apple/Makefile
> > > > > > > > >  create mode 100644 arch/arm/mach-apple/board.c
> > > > > > > > >  create mode 100644 arch/arm/mach-apple/lowlevel_init.S
> > > > > > > > >  create mode 100644 configs/apple_m1_defconfig
> > > > > > > > >  create mode 100644 doc/board/apple/index.rst
> > > > > > > > >  create mode 100644 doc/board/apple/m1.rst
> > > > > > > > >  create mode 100644 drivers/misc/apple_dart.c
> > > > > > > > >  create mode 100644 include/configs/apple.h
> > > > > > > > >  create mode 100644 include/dt-bindings/interrupt-controller/apple-aic.h
> > > > > > > > >  create mode 100644 include/dt-bindings/pinctrl/apple.h
> > > > > > > > >  create mode 100644 include/dt-bindings/spmi/spmi.h
> > > > > > > > >
> > > > > > > > > --
> > > > > > > > > 2.33.0
> > > > > > > > >
> > > > > > > >
> > > > > > > > I gave this a whirl on a Macbook Air A2337 and needed the patch below
> > > > > > > > to build the devicetree files. Sorry the formatting is broken.
> > > > > > > >
> > > > > > > > Also when booting I get this:
> > > > > > > >
> > > > > > > > ...
> > > > > > > > Preparing to boot kernel at 0x808200000 with fdt at 0x8082e8000
> > > > > > > > Valid payload found
> > > > > > > > Preparing to run next stage at 0x808200000...
> > > > > > > > MMU: shutting down...
> > > > > > > > MMU: shutdown successful, clearing caches
> > > > > > > >
> > > > > > > >
> > > > > > > > Then the display clears and it hangs. If I try the J274 devicetree it
> > > > > > > > just reboots at that point.
> > > > > > > >
> > > > > > > > What should I expect? I was hoping for console output as I don't have
> > > > > > > > serial connected. I don't have a suitable serial cable, and the USB
> > > > > > > > gadget mode did not result in a ttyACM0 device appearing.
> > > > > > >
> > > > > > > For framebuffer support you also need the "30bpp framebuffer support"
> > > > > > > series I posted earlier:
> > > > > > >
> > > > > > > https://patchwork.ozlabs.org/project/uboot/list/?series=262617
> > > > > > >
> > > > > > > With that your should get the usual U-Boot output on the screen.  I've
> > > > > > > not tested the Air, but it should work there.
> > > > > >
> > > > > > Ah OK, yes that fixes it, thanks!
> > > > > >
> > > > > > So how do I get the keyboard to work in U-Boot? Or are you using
> > > > > > serial somehow?
> > > > >
> > > > > The laptop keyboard doesn't work yet, so I'm using a USB keyboard when
> > > > > I'm not using a serial console.  You need the xhci-dwc3 diff I sent
> > > > > earlier for that:
> > > > >
> > > > > https://patchwork.ozlabs.org/project/uboot/patch/20210916140009.59009-1-kettenis@openbsd.org/
> > > >
> > > > Actually that seems to be applied in mainline now. Yes USB keyboard works.
> > > >
> > > > It looks like the keyboard needs SPI and there is some sort of linux
> > > > keyboard driver, but perhaps not for M1.
> > >
> > > Yes.  It is certaily doable in u-boot, but not a priority.  I plan to
> > > revisit this once I have a driver going in OpenBSD and a better
> > > understanding of how the hardware works.
> >
> > Makes sense.
> >
> > >
> > > > > > Also it takes for ever to put a test version on the device...how are
> > > > > > you doing that for development?
> > > > >
> > > > > If you install m1n1.macho without a payload, you can then use the
> > > > > python scripts that come with m1n1 to upload kernels over serial.
> > > > > There is a USB gadget implementation in m1n1, so you don't need a real
> > > > > serial connection.  Just connect a Linux machine to the M1 Mac using a
> > > > > USB cable and a USB serial device should show up on the Linux machine
> > > > > once m1n1 is running on the Mac.  Set the M1N1DEVICE environment
> > > > > variable to the right device name and run:
> > > > >
> > > > > $ python3 linux.py --compression=none u-boot-nodtb.bin t8103-j274.dtb
> > > >
> > > > OK I see. I did try the USB serial thing but was missing the fact that
> > > > U-Boot seems to kill it. So this works fine, thank you will await your
> > > > next series. Any way to get U-Boot serial console going in the same
> > > > way?
> > >
> > > Probably, but the existing USB gadget code in u-boot doesn't seem to
> > > implement USB serial so it would be a significant amount of work.  And
> > > it would only work after you bring the USB controller up, so it
> > > wouldn't be very useful for debugging purposes.
> >
> > Yse, usbtty.c is very old and doesn't even use driver model, so would
> > need a refresh.
> >
> > >
> > > There is a real serial port, and if you have another M1 Mac it should
> > > be fairly easy to access it:
> > >
> > > https://github.com/AsahiLinux/docs/wiki/Developer-Quickstart#using-an-m1-machine
> > >
> > > Otherwise you need to build some special hardware.
> >
> > Yes I saw that but I only have one. Will see if I can steal/find another.
> 
> OK got a mini as a DUT. It works so far as running macvdmtool on the
> Air and I can see the /dev/cu.debug-console device, but don't see any
> serial output when I reboot the DUT. The display works fine, although
> the USB keyboard only works on the USB-C ports of the mini, not the
> USB-A ones.
> 
> Do you use 'screen /dev/cu.debug-console' or something else? I have a
> cable with SS on it: This is what I see on the air.
> 
> sudo ./macvdmtool reboot serial
> Mac type: J313AP
> Looking for HPM devices...
> Found: IOService:/AppleARMPE/arm-io@10F00000/AppleT810xIO/i2c0@35010000/AppleS5L8940XI2CController/hpmBusManager@6B/AppleHPMBusController/hpm0/AppleHPMARM
> Connection: Sink
> Status: APP
> Unlocking... OK
> Entering DBMa mode... Status: DBMa
> Rebooting target into normal mode... OK
> Waiting for connection........ Connected
> Putting target into serial mode... OK
> Putting local end into serial mode... OK
> Exiting DBMa mode... OK
> sglass@Simons-MacBook-Air macvdmtool
> 
> So it seems to be connected but I am not seeing serial output from
> m1n1 or U-Boot.

Maybe ask on #asahi; apparently not all type-C to type-C cables have
all the necessary wires.  But when we briefly tried this during the
last OpenBSD hackathon, I couldn't get it to work either.

^ permalink raw reply	[flat|nested] 46+ messages in thread

* Re: [PATCH 0/5] Apple M1 Support
  2021-09-28  7:36                 ` Mark Kettenis
@ 2021-09-28 12:07                   ` Simon Glass
  0 siblings, 0 replies; 46+ messages in thread
From: Simon Glass @ 2021-09-28 12:07 UTC (permalink / raw)
  To: Mark Kettenis
  Cc: Mark Kettenis, U-Boot Mailing List, Oliver Graute, Michael Walle,
	Anup Patel, Jonathan Balkind, Tianrui Wei, Padmarao Begari,
	Kishon Vijay Abraham I, Stephan Gerhold, Heinrich Schuchardt,
	Bin Meng, Asherah Connor, Michal Simek, Wasim Khan, Ye Li,
	Igor Opaniuk, Stefan Roese, Minkyu Kang, AKASHI Takahiro,
	Weijie Gao, Vabhav Sharma, Andy Shevchenko, Pratyush Yadav

Hi Mark,

On Tue, 28 Sept 2021 at 01:36, Mark Kettenis <mark.kettenis@xs4all.nl> wrote:
>
> > From: Simon Glass <sjg@chromium.org>
> > Date: Mon, 27 Sep 2021 21:46:56 -0600
> >
> > Hi Mark,
> >
> > On Sun, 26 Sept 2021 at 09:53, Simon Glass <sjg@chromium.org> wrote:
> > >
> > > Hi Mark,
> > >
> > > On Sat, 25 Sept 2021 at 10:46, Mark Kettenis <mark.kettenis@xs4all.nl> wrote:
> > > >
> > > > > From: Simon Glass <sjg@chromium.org>
> > > > > Date: Sat, 25 Sep 2021 08:42:30 -0600
> > > > >
> > > > > Hi Mark,
> > > > >
> > > > > On Sat, 25 Sept 2021 at 07:52, Mark Kettenis <mark.kettenis@xs4all.nl> wrote:
> > > > > >
> > > > > > > From: Simon Glass <sjg@chromium.org>
> > > > > > > Date: Sat, 25 Sep 2021 07:27:41 -0600
> > > > > > >
> > > > > > > Hi Mark,
> > > > > > >
> > > > > > > On Sat, 25 Sept 2021 at 02:11, Mark Kettenis <mark.kettenis@xs4all.nl> wrote:
> > > > > > > >
> > > > > > > > > From: Simon Glass <sjg@chromium.org>
> > > > > > > > > Date: Fri, 24 Sep 2021 19:20:32 -0600
> > > > > > > > >
> > > > > > > > > Hi Mark,
> > > > > > > > >
> > > > > > > > > On Sat, 18 Sept 2021 at 07:54, Mark Kettenis <kettenis@openbsd.org> wrote:
> > > > > > > > > >
> > > > > > > > > > This series adds basic support for Apple's M1 SoC to U-Boot.
> > > > > > > > > > This builds a basic U-Boot that can be used as a payload
> > > > > > > > > > for the m1n1 boot loader being developed by the Asahi Linux
> > > > > > > > > > project.
> > > > > > > > > >
> > > > > > > > > > The goal here is to privide an UEFI interface on these machines that
> > > > > > > > >
> > > > > > > > > provide
> > > > > > > > >
> > > > > > > > > > allows booting various open source OSes.  This initial series provides
> > > > > > > > > > support for the serial port, framebuffer and the USB 3.1 Type-C ports.
> > > > > > > > > > It can boot a support OS (e.g. OpenBSD/arm64) from a USB disk.
> > > > > > > > > >
> > > > > > > > > > Mark Kettenis (5):
> > > > > > > > > >   arm: apple: Add initial support for Apple's M1 SoC
> > > > > > > > > >   serial: s5p: Add Apple M1 support
> > > > > > > > > >   misc: Add Apple DART driver
> > > > > > > > > >   arm: dts: apple: Add preliminary device trees
> > > > > > > > > >   doc: board: apple: Add Apple M1 documentation
> > > > > > > > > >
> > > > > > > > > >  arch/arm/Kconfig                              |  22 +
> > > > > > > > > >  arch/arm/Makefile                             |   1 +
> > > > > > > > > >  arch/arm/dts/t8103-j274.dts                   | 135 +++++
> > > > > > > > > >  arch/arm/dts/t8103-j293.dts                   |  97 ++++
> > > > > > > > > >  arch/arm/dts/t8103.dtsi                       | 506 ++++++++++++++++++
> > > > > > > > > >  arch/arm/include/asm/arch-m1/clk.h            |  11 +
> > > > > > > > > >  arch/arm/include/asm/arch-m1/uart.h           |  41 ++
> > > > > > > > > >  arch/arm/mach-apple/Kconfig                   |  18 +
> > > > > > > > > >  arch/arm/mach-apple/Makefile                  |   4 +
> > > > > > > > > >  arch/arm/mach-apple/board.c                   | 163 ++++++
> > > > > > > > > >  arch/arm/mach-apple/lowlevel_init.S           |  16 +
> > > > > > > > > >  configs/apple_m1_defconfig                    |  14 +
> > > > > > > > > >  doc/board/apple/index.rst                     |   9 +
> > > > > > > > > >  doc/board/apple/m1.rst                        |  54 ++
> > > > > > > > > >  doc/board/index.rst                           |   1 +
> > > > > > > > > >  drivers/misc/Kconfig                          |   7 +
> > > > > > > > > >  drivers/misc/Makefile                         |   1 +
> > > > > > > > > >  drivers/misc/apple_dart.c                     | 171 ++++++
> > > > > > > > > >  drivers/serial/Kconfig                        |   2 +-
> > > > > > > > > >  drivers/serial/serial_s5p.c                   |  22 +
> > > > > > > > > >  include/configs/apple.h                       |  38 ++
> > > > > > > > > >  .../interrupt-controller/apple-aic.h          |  15 +
> > > > > > > > > >  include/dt-bindings/pinctrl/apple.h           |  13 +
> > > > > > > > > >  include/dt-bindings/spmi/spmi.h               |  10 +
> > > > > > > > > >  24 files changed, 1370 insertions(+), 1 deletion(-)
> > > > > > > > > >  create mode 100644 arch/arm/dts/t8103-j274.dts
> > > > > > > > > >  create mode 100644 arch/arm/dts/t8103-j293.dts
> > > > > > > > > >  create mode 100644 arch/arm/dts/t8103.dtsi
> > > > > > > > > >  create mode 100644 arch/arm/include/asm/arch-m1/clk.h
> > > > > > > > > >  create mode 100644 arch/arm/include/asm/arch-m1/uart.h
> > > > > > > > > >  create mode 100644 arch/arm/mach-apple/Kconfig
> > > > > > > > > >  create mode 100644 arch/arm/mach-apple/Makefile
> > > > > > > > > >  create mode 100644 arch/arm/mach-apple/board.c
> > > > > > > > > >  create mode 100644 arch/arm/mach-apple/lowlevel_init.S
> > > > > > > > > >  create mode 100644 configs/apple_m1_defconfig
> > > > > > > > > >  create mode 100644 doc/board/apple/index.rst
> > > > > > > > > >  create mode 100644 doc/board/apple/m1.rst
> > > > > > > > > >  create mode 100644 drivers/misc/apple_dart.c
> > > > > > > > > >  create mode 100644 include/configs/apple.h
> > > > > > > > > >  create mode 100644 include/dt-bindings/interrupt-controller/apple-aic.h
> > > > > > > > > >  create mode 100644 include/dt-bindings/pinctrl/apple.h
> > > > > > > > > >  create mode 100644 include/dt-bindings/spmi/spmi.h
> > > > > > > > > >
> > > > > > > > > > --
> > > > > > > > > > 2.33.0
> > > > > > > > > >
> > > > > > > > >
> > > > > > > > > I gave this a whirl on a Macbook Air A2337 and needed the patch below
> > > > > > > > > to build the devicetree files. Sorry the formatting is broken.
> > > > > > > > >
> > > > > > > > > Also when booting I get this:
> > > > > > > > >
> > > > > > > > > ...
> > > > > > > > > Preparing to boot kernel at 0x808200000 with fdt at 0x8082e8000
> > > > > > > > > Valid payload found
> > > > > > > > > Preparing to run next stage at 0x808200000...
> > > > > > > > > MMU: shutting down...
> > > > > > > > > MMU: shutdown successful, clearing caches
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > Then the display clears and it hangs. If I try the J274 devicetree it
> > > > > > > > > just reboots at that point.
> > > > > > > > >
> > > > > > > > > What should I expect? I was hoping for console output as I don't have
> > > > > > > > > serial connected. I don't have a suitable serial cable, and the USB
> > > > > > > > > gadget mode did not result in a ttyACM0 device appearing.
> > > > > > > >
> > > > > > > > For framebuffer support you also need the "30bpp framebuffer support"
> > > > > > > > series I posted earlier:
> > > > > > > >
> > > > > > > > https://patchwork.ozlabs.org/project/uboot/list/?series=262617
> > > > > > > >
> > > > > > > > With that your should get the usual U-Boot output on the screen.  I've
> > > > > > > > not tested the Air, but it should work there.
> > > > > > >
> > > > > > > Ah OK, yes that fixes it, thanks!
> > > > > > >
> > > > > > > So how do I get the keyboard to work in U-Boot? Or are you using
> > > > > > > serial somehow?
> > > > > >
> > > > > > The laptop keyboard doesn't work yet, so I'm using a USB keyboard when
> > > > > > I'm not using a serial console.  You need the xhci-dwc3 diff I sent
> > > > > > earlier for that:
> > > > > >
> > > > > > https://patchwork.ozlabs.org/project/uboot/patch/20210916140009.59009-1-kettenis@openbsd.org/
> > > > >
> > > > > Actually that seems to be applied in mainline now. Yes USB keyboard works.
> > > > >
> > > > > It looks like the keyboard needs SPI and there is some sort of linux
> > > > > keyboard driver, but perhaps not for M1.
> > > >
> > > > Yes.  It is certaily doable in u-boot, but not a priority.  I plan to
> > > > revisit this once I have a driver going in OpenBSD and a better
> > > > understanding of how the hardware works.
> > >
> > > Makes sense.
> > >
> > > >
> > > > > > > Also it takes for ever to put a test version on the device...how are
> > > > > > > you doing that for development?
> > > > > >
> > > > > > If you install m1n1.macho without a payload, you can then use the
> > > > > > python scripts that come with m1n1 to upload kernels over serial.
> > > > > > There is a USB gadget implementation in m1n1, so you don't need a real
> > > > > > serial connection.  Just connect a Linux machine to the M1 Mac using a
> > > > > > USB cable and a USB serial device should show up on the Linux machine
> > > > > > once m1n1 is running on the Mac.  Set the M1N1DEVICE environment
> > > > > > variable to the right device name and run:
> > > > > >
> > > > > > $ python3 linux.py --compression=none u-boot-nodtb.bin t8103-j274.dtb
> > > > >
> > > > > OK I see. I did try the USB serial thing but was missing the fact that
> > > > > U-Boot seems to kill it. So this works fine, thank you will await your
> > > > > next series. Any way to get U-Boot serial console going in the same
> > > > > way?
> > > >
> > > > Probably, but the existing USB gadget code in u-boot doesn't seem to
> > > > implement USB serial so it would be a significant amount of work.  And
> > > > it would only work after you bring the USB controller up, so it
> > > > wouldn't be very useful for debugging purposes.
> > >
> > > Yse, usbtty.c is very old and doesn't even use driver model, so would
> > > need a refresh.
> > >
> > > >
> > > > There is a real serial port, and if you have another M1 Mac it should
> > > > be fairly easy to access it:
> > > >
> > > > https://github.com/AsahiLinux/docs/wiki/Developer-Quickstart#using-an-m1-machine
> > > >
> > > > Otherwise you need to build some special hardware.
> > >
> > > Yes I saw that but I only have one. Will see if I can steal/find another.
> >
> > OK got a mini as a DUT. It works so far as running macvdmtool on the
> > Air and I can see the /dev/cu.debug-console device, but don't see any
> > serial output when I reboot the DUT. The display works fine, although
> > the USB keyboard only works on the USB-C ports of the mini, not the
> > USB-A ones.
> >
> > Do you use 'screen /dev/cu.debug-console' or something else? I have a
> > cable with SS on it: This is what I see on the air.
> >
> > sudo ./macvdmtool reboot serial
> > Mac type: J313AP
> > Looking for HPM devices...
> > Found: IOService:/AppleARMPE/arm-io@10F00000/AppleT810xIO/i2c0@35010000/AppleS5L8940XI2CController/hpmBusManager@6B/AppleHPMBusController/hpm0/AppleHPMARM
> > Connection: Sink
> > Status: APP
> > Unlocking... OK
> > Entering DBMa mode... Status: DBMa
> > Rebooting target into normal mode... OK
> > Waiting for connection........ Connected
> > Putting target into serial mode... OK
> > Putting local
end into serial mode... OK
> > Exiting DBMa mode... OK
> > sglass@Simons-MacBook-Air macvdmtool
> >
> > So it seems to be connected but I am not seeing serial output from
> > m1n1 or U-Boot.
>
> Maybe ask on #asahi; apparently not all type-C to type-C cables have
> all the necessary wires.  But when we briefly tried this during the
> last OpenBSD hackathon, I couldn't get it to work either.

Thanks for the tip. I asked on irc and found I was not setting the
baud rate, and screen doesn't seem to work. But this works:

sudo picocom -q --omap crlf --imap lfcrlf -b 115200 /dev/tty.debug-console

Regards,
Simon

^ permalink raw reply	[flat|nested] 46+ messages in thread

* Re: [PATCH 2/5] serial: s5p: Add Apple M1 support
  2021-09-20  3:15   ` Simon Glass
  2021-09-25 13:27     ` Simon Glass
@ 2021-10-02 22:15     ` Mark Kettenis
  2021-10-03  2:01       ` Simon Glass
  1 sibling, 1 reply; 46+ messages in thread
From: Mark Kettenis @ 2021-10-02 22:15 UTC (permalink / raw)
  To: Simon Glass
  Cc: kettenis, u-boot, oliver.graute, ycliang, kishon, priyanka.jain,
	stephan, padmarao.begari, tianrui-wei, michael, xypron.glpk,
	ashe, bin.meng, michal.simek, wasim.khan, ye.li, igor.opaniuk,
	sr, takahiro.akashi, vabhav.sharma, weijie.gao, p.yadav,
	andriy.shevchenko

> From: Simon Glass <sjg@chromium.org>
> Date: Sun, 19 Sep 2021 21:15:59 -0600
> 
> Hi Mark,
> 
> On Sat, 18 Sept 2021 at 07:55, Mark Kettenis <kettenis@openbsd.org> wrote:
> >
> > Apple M1 SoCs include an S5L UART which is a variant of the S5P
> > UART.  Add support for this variant and enable it by default
> > on Apple SoCs.
> >
> > Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
> > ---
> >  arch/arm/include/asm/arch-m1/clk.h  | 11 ++++++++
> >  arch/arm/include/asm/arch-m1/uart.h | 41 +++++++++++++++++++++++++++++
> >  arch/arm/mach-apple/board.c         |  5 ++++
> >  drivers/serial/Kconfig              |  2 +-
> >  drivers/serial/serial_s5p.c         | 22 ++++++++++++++++
> >  5 files changed, 80 insertions(+), 1 deletion(-)
> >  create mode 100644 arch/arm/include/asm/arch-m1/clk.h
> >  create mode 100644 arch/arm/include/asm/arch-m1/uart.h
> >
> > diff --git a/arch/arm/include/asm/arch-m1/clk.h b/arch/arm/include/asm/arch-m1/clk.h
> > new file mode 100644
> > index 0000000000..f4326d0c0f
> > --- /dev/null
> > +++ b/arch/arm/include/asm/arch-m1/clk.h
> > @@ -0,0 +1,11 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/*
> > + * Copyright (C) 2021 Mark Kettenis <kettenis@openbsd.org>
> > + */
> > +
> > +#ifndef __ASM_ARM_ARCH_CLK_H_
> > +#define __ASM_ARM_ARCH_CLK_H_
> > +
> > +unsigned long get_uart_clk(int dev_index);
> 
> comment? But this should be in a clock driver, unless you are trying
> to get a debug UART up ASAP with minimal code?
> 
> > +
> > +#endif
> > diff --git a/arch/arm/include/asm/arch-m1/uart.h b/arch/arm/include/asm/arch-m1/uart.h
> > new file mode 100644
> > index 0000000000..d2a17a221e
> > --- /dev/null
> > +++ b/arch/arm/include/asm/arch-m1/uart.h
> > @@ -0,0 +1,41 @@
> > +/* SPDX-License-Identifier: GPL-2.0+ */
> > +/*
> > + * (C) Copyright 2009 Samsung Electronics
> > + * Minkyu Kang <mk7.kang@samsung.com>
> > + * Heungjun Kim <riverful.kim@samsung.com>
> > + */
> > +
> > +#ifndef __ASM_ARCH_UART_H_
> > +#define __ASM_ARCH_UART_H_
> > +
> > +#ifndef __ASSEMBLY__
> > +/* baudrate rest value */
> > +union br_rest {
> > +       unsigned short  slot;           /* udivslot */
> > +       unsigned char   value;          /* ufracval */
> > +};
> > +
> > +struct s5p_uart {
> > +       unsigned int    ulcon;
> > +       unsigned int    ucon;
> > +       unsigned int    ufcon;
> > +       unsigned int    umcon;
> > +       unsigned int    utrstat;
> > +       unsigned int    uerstat;
> > +       unsigned int    ufstat;
> > +       unsigned int    umstat;
> > +       unsigned int    utxh;
> > +       unsigned int    urxh;
> > +       unsigned int    ubrdiv;
> > +       union br_rest   rest;
> > +       unsigned char   res3[0x3fd0];
> > +};
> > +
> > +static inline int s5p_uart_divslot(void)
> > +{
> > +       return 0;
> > +}
> > +
> > +#endif /* __ASSEMBLY__ */
> > +
> > +#endif
> > diff --git a/arch/arm/mach-apple/board.c b/arch/arm/mach-apple/board.c
> > index 0c8b35292e..8bc5c2f69e 100644
> > --- a/arch/arm/mach-apple/board.c
> > +++ b/arch/arm/mach-apple/board.c
> > @@ -156,3 +156,8 @@ ulong board_get_usable_ram_top(ulong total_size)
> >          */
> >         return 0x980000000;
> >  }
> > +
> > +unsigned long get_uart_clk(int dev_index)
> > +{
> > +       return 24000000;
> 
> Should add to devicetree for the driver
> 
> > +}
> > diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
> > index 93348c0929..c3ac773929 100644
> > --- a/drivers/serial/Kconfig
> > +++ b/drivers/serial/Kconfig
> > @@ -719,7 +719,7 @@ config ROCKCHIP_SERIAL
> >
> >  config S5P_SERIAL
> >         bool "Support for Samsung S5P UART"
> > -       depends on ARCH_EXYNOS || ARCH_S5PC1XX
> > +       depends on ARCH_APPLE || ARCH_EXYNOS || ARCH_S5PC1XX
> >         default y
> >         help
> >           Select this to enable Samsung S5P UART support.
> > diff --git a/drivers/serial/serial_s5p.c b/drivers/serial/serial_s5p.c
> > index 6d09952a5d..eb770d9b62 100644
> > --- a/drivers/serial/serial_s5p.c
> > +++ b/drivers/serial/serial_s5p.c
> > @@ -21,12 +21,21 @@
> >
> >  DECLARE_GLOBAL_DATA_PTR;
> >
> > +#ifdef CONFIG_ARCH_APPLE
> 
> This should use the compatible string to decide which variant it is,
> then the checks happen at runtime. We should never have arch-specific
> #ifdefs in drivers.
> 
> > +#define RX_FIFO_COUNT_SHIFT    0
> > +#define RX_FIFO_COUNT_MASK     (0xf << RX_FIFO_COUNT_SHIFT)
> > +#define RX_FIFO_FULL           (1 << 8)
> > +#define TX_FIFO_COUNT_SHIFT    4
> > +#define TX_FIFO_COUNT_MASK     (0xf << TX_FIFO_COUNT_SHIFT)
> > +#define TX_FIFO_FULL           (1 << 9)
> > +#else
> >  #define RX_FIFO_COUNT_SHIFT    0
> >  #define RX_FIFO_COUNT_MASK     (0xff << RX_FIFO_COUNT_SHIFT)
> >  #define RX_FIFO_FULL           (1 << 8)
> >  #define TX_FIFO_COUNT_SHIFT    16
> >  #define TX_FIFO_COUNT_MASK     (0xff << TX_FIFO_COUNT_SHIFT)
> >  #define TX_FIFO_FULL           (1 << 24)
> > +#endif
> >
> >  /* Information about a serial port */
> >  struct s5p_serial_plat {
> > @@ -83,7 +92,11 @@ static void __maybe_unused s5p_serial_baud(struct s5p_uart *uart, uint uclk,
> >         if (s5p_uart_divslot())
> >                 writew(udivslot[val % 16], &uart->rest.slot);
> >         else
> > +#ifdef CONFIG_ARCH_APPLE
> > +               writel(val % 16, &uart->rest.value);
> > +#else
> >                 writeb(val % 16, &uart->rest.value);
> > +#endif
> >  }
> >
> >  #ifndef CONFIG_SPL_BUILD
> > @@ -148,7 +161,11 @@ static int s5p_serial_getc(struct udevice *dev)
> >                 return -EAGAIN;
> >
> >         serial_err_check(uart, 0);
> > +#ifdef CONFIG_ARCH_APPLE
> > +       return (int)(readl(&uart->urxh) & 0xff);
> > +#else
> >         return (int)(readb(&uart->urxh) & 0xff);
> > +#endif
> >  }
> >
> >  static int s5p_serial_putc(struct udevice *dev, const char ch)
> > @@ -159,7 +176,11 @@ static int s5p_serial_putc(struct udevice *dev, const char ch)
> >         if (readl(&uart->ufstat) & TX_FIFO_FULL)
> >                 return -EAGAIN;
> >
> > +#ifdef CONFIG_ARCH_APPLE
> > +       writel(ch, &uart->utxh);
> > +#else
> >         writeb(ch, &uart->utxh);
> > +#endif
> >         serial_err_check(uart, 1);
> >
> >         return 0;
> > @@ -201,6 +222,7 @@ static const struct dm_serial_ops s5p_serial_ops = {
> >
> >  static const struct udevice_id s5p_serial_ids[] = {
> >         { .compatible = "samsung,exynos4210-uart" },
> > +       { .compatible = "apple,s5l-uart" },
> >         { }
> >  };
> >
> > --
> > 2.33.0
> >
> 
> Can you add debug UART support? Or does this already work?

I don't think it does work.  But yes, I want to add it since it will
help a lot with debugging.  That makes fixing some of the issues
raised by you and bing more problematic since the debug UART support
code:

- Needs to use 32-bit access on Apple M1, and using the "reg-io-width"
  property there isn't possible.

- Relies on the FIFO control bits which are in a different position on
  the Apple M1.

So I am starting to wonder whether it makes sense to simply copy
serial_s5p.c to serial_s5l.c and modify that one to do the right thing
on the apple SoC.

Alternatively I could introduce Kconfig stuff to switch between S5L
and S5P support.

^ permalink raw reply	[flat|nested] 46+ messages in thread

* Re: [PATCH 2/5] serial: s5p: Add Apple M1 support
  2021-10-02 22:15     ` Mark Kettenis
@ 2021-10-03  2:01       ` Simon Glass
  0 siblings, 0 replies; 46+ messages in thread
From: Simon Glass @ 2021-10-03  2:01 UTC (permalink / raw)
  To: Mark Kettenis
  Cc: Mark Kettenis, U-Boot Mailing List, Oliver Graute, Leo Liang,
	Kishon Vijay Abraham I, Priyanka Jain, Stephan Gerhold,
	Padmarao Begari, Tianrui Wei, Michael Walle, Heinrich Schuchardt,
	Asherah Connor, Bin Meng, Michal Simek, Wasim Khan, Ye Li,
	Igor Opaniuk, Stefan Roese, AKASHI Takahiro, Vabhav Sharma,
	Weijie Gao, Pratyush Yadav, Andy Shevchenko

Hi Mark,

On Sat, 2 Oct 2021 at 16:16, Mark Kettenis <mark.kettenis@xs4all.nl> wrote:
>
> > From: Simon Glass <sjg@chromium.org>
> > Date: Sun, 19 Sep 2021 21:15:59 -0600
> >
> > Hi Mark,
> >
> > On Sat, 18 Sept 2021 at 07:55, Mark Kettenis <kettenis@openbsd.org> wrote:
> > >
> > > Apple M1 SoCs include an S5L UART which is a variant of the S5P
> > > UART.  Add support for this variant and enable it by default
> > > on Apple SoCs.
> > >
> > > Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
> > > ---
> > >  arch/arm/include/asm/arch-m1/clk.h  | 11 ++++++++
> > >  arch/arm/include/asm/arch-m1/uart.h | 41 +++++++++++++++++++++++++++++
> > >  arch/arm/mach-apple/board.c         |  5 ++++
> > >  drivers/serial/Kconfig              |  2 +-
> > >  drivers/serial/serial_s5p.c         | 22 ++++++++++++++++
> > >  5 files changed, 80 insertions(+), 1 deletion(-)
> > >  create mode 100644 arch/arm/include/asm/arch-m1/clk.h
> > >  create mode 100644 arch/arm/include/asm/arch-m1/uart.h
> > >
> > > diff --git a/arch/arm/include/asm/arch-m1/clk.h b/arch/arm/include/asm/arch-m1/clk.h
> > > new file mode 100644
> > > index 0000000000..f4326d0c0f
> > > --- /dev/null
> > > +++ b/arch/arm/include/asm/arch-m1/clk.h
> > > @@ -0,0 +1,11 @@
> > > +// SPDX-License-Identifier: GPL-2.0+
> > > +/*
> > > + * Copyright (C) 2021 Mark Kettenis <kettenis@openbsd.org>
> > > + */
> > > +
> > > +#ifndef __ASM_ARM_ARCH_CLK_H_
> > > +#define __ASM_ARM_ARCH_CLK_H_
> > > +
> > > +unsigned long get_uart_clk(int dev_index);
> >
> > comment? But this should be in a clock driver, unless you are trying
> > to get a debug UART up ASAP with minimal code?
> >
> > > +
> > > +#endif
> > > diff --git a/arch/arm/include/asm/arch-m1/uart.h b/arch/arm/include/asm/arch-m1/uart.h
> > > new file mode 100644
> > > index 0000000000..d2a17a221e
> > > --- /dev/null
> > > +++ b/arch/arm/include/asm/arch-m1/uart.h
> > > @@ -0,0 +1,41 @@
> > > +/* SPDX-License-Identifier: GPL-2.0+ */
> > > +/*
> > > + * (C) Copyright 2009 Samsung Electronics
> > > + * Minkyu Kang <mk7.kang@samsung.com>
> > > + * Heungjun Kim <riverful.kim@samsung.com>
> > > + */
> > > +
> > > +#ifndef __ASM_ARCH_UART_H_
> > > +#define __ASM_ARCH_UART_H_
> > > +
> > > +#ifndef __ASSEMBLY__
> > > +/* baudrate rest value */
> > > +union br_rest {
> > > +       unsigned short  slot;           /* udivslot */
> > > +       unsigned char   value;          /* ufracval */
> > > +};
> > > +
> > > +struct s5p_uart {
> > > +       unsigned int    ulcon;
> > > +       unsigned int    ucon;
> > > +       unsigned int    ufcon;
> > > +       unsigned int    umcon;
> > > +       unsigned int    utrstat;
> > > +       unsigned int    uerstat;
> > > +       unsigned int    ufstat;
> > > +       unsigned int    umstat;
> > > +       unsigned int    utxh;
> > > +       unsigned int    urxh;
> > > +       unsigned int    ubrdiv;
> > > +       union br_rest   rest;
> > > +       unsigned char   res3[0x3fd0];
> > > +};
> > > +
> > > +static inline int s5p_uart_divslot(void)
> > > +{
> > > +       return 0;
> > > +}
> > > +
> > > +#endif /* __ASSEMBLY__ */
> > > +
> > > +#endif
> > > diff --git a/arch/arm/mach-apple/board.c b/arch/arm/mach-apple/board.c
> > > index 0c8b35292e..8bc5c2f69e 100644
> > > --- a/arch/arm/mach-apple/board.c
> > > +++ b/arch/arm/mach-apple/board.c
> > > @@ -156,3 +156,8 @@ ulong board_get_usable_ram_top(ulong total_size)
> > >          */
> > >         return 0x980000000;
> > >  }
> > > +
> > > +unsigned long get_uart_clk(int dev_index)
> > > +{
> > > +       return 24000000;
> >
> > Should add to devicetree for the driver
> >
> > > +}
> > > diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
> > > index 93348c0929..c3ac773929 100644
> > > --- a/drivers/serial/Kconfig
> > > +++ b/drivers/serial/Kconfig
> > > @@ -719,7 +719,7 @@ config ROCKCHIP_SERIAL
> > >
> > >  config S5P_SERIAL
> > >         bool "Support for Samsung S5P UART"
> > > -       depends on ARCH_EXYNOS || ARCH_S5PC1XX
> > > +       depends on ARCH_APPLE || ARCH_EXYNOS || ARCH_S5PC1XX
> > >         default y
> > >         help
> > >           Select this to enable Samsung S5P UART support.
> > > diff --git a/drivers/serial/serial_s5p.c b/drivers/serial/serial_s5p.c
> > > index 6d09952a5d..eb770d9b62 100644
> > > --- a/drivers/serial/serial_s5p.c
> > > +++ b/drivers/serial/serial_s5p.c
> > > @@ -21,12 +21,21 @@
> > >
> > >  DECLARE_GLOBAL_DATA_PTR;
> > >
> > > +#ifdef CONFIG_ARCH_APPLE
> >
> > This should use the compatible string to decide which variant it is,
> > then the checks happen at runtime. We should never have arch-specific
> > #ifdefs in drivers.
> >
> > > +#define RX_FIFO_COUNT_SHIFT    0
> > > +#define RX_FIFO_COUNT_MASK     (0xf << RX_FIFO_COUNT_SHIFT)
> > > +#define RX_FIFO_FULL           (1 << 8)
> > > +#define TX_FIFO_COUNT_SHIFT    4
> > > +#define TX_FIFO_COUNT_MASK     (0xf << TX_FIFO_COUNT_SHIFT)
> > > +#define TX_FIFO_FULL           (1 << 9)
> > > +#else
> > >  #define RX_FIFO_COUNT_SHIFT    0
> > >  #define RX_FIFO_COUNT_MASK     (0xff << RX_FIFO_COUNT_SHIFT)
> > >  #define RX_FIFO_FULL           (1 << 8)
> > >  #define TX_FIFO_COUNT_SHIFT    16
> > >  #define TX_FIFO_COUNT_MASK     (0xff << TX_FIFO_COUNT_SHIFT)
> > >  #define TX_FIFO_FULL           (1 << 24)
> > > +#endif
> > >
> > >  /* Information about a serial port */
> > >  struct s5p_serial_plat {
> > > @@ -83,7 +92,11 @@ static void __maybe_unused s5p_serial_baud(struct s5p_uart *uart, uint uclk,
> > >         if (s5p_uart_divslot())
> > >                 writew(udivslot[val % 16], &uart->rest.slot);
> > >         else
> > > +#ifdef CONFIG_ARCH_APPLE
> > > +               writel(val % 16, &uart->rest.value);
> > > +#else
> > >                 writeb(val % 16, &uart->rest.value);
> > > +#endif
> > >  }
> > >
> > >  #ifndef CONFIG_SPL_BUILD
> > > @@ -148,7 +161,11 @@ static int s5p_serial_getc(struct udevice *dev)
> > >                 return -EAGAIN;
> > >
> > >         serial_err_check(uart, 0);
> > > +#ifdef CONFIG_ARCH_APPLE
> > > +       return (int)(readl(&uart->urxh) & 0xff);
> > > +#else
> > >         return (int)(readb(&uart->urxh) & 0xff);
> > > +#endif
> > >  }
> > >
> > >  static int s5p_serial_putc(struct udevice *dev, const char ch)
> > > @@ -159,7 +176,11 @@ static int s5p_serial_putc(struct udevice *dev, const char ch)
> > >         if (readl(&uart->ufstat) & TX_FIFO_FULL)
> > >                 return -EAGAIN;
> > >
> > > +#ifdef CONFIG_ARCH_APPLE
> > > +       writel(ch, &uart->utxh);
> > > +#else
> > >         writeb(ch, &uart->utxh);
> > > +#endif
> > >         serial_err_check(uart, 1);
> > >
> > >         return 0;
> > > @@ -201,6 +222,7 @@ static const struct dm_serial_ops s5p_serial_ops = {
> > >
> > >  static const struct udevice_id s5p_serial_ids[] = {
> > >         { .compatible = "samsung,exynos4210-uart" },
> > > +       { .compatible = "apple,s5l-uart" },
> > >         { }
> > >  };
> > >
> > > --
> > > 2.33.0
> > >
> >
> > Can you add debug UART support? Or does this already work?
>
> I don't think it does work.  But yes, I want to add it since it will
> help a lot with debugging.  That makes fixing some of the issues
> raised by you and bing more problematic since the debug UART support
> code:
>
> - Needs to use 32-bit access on Apple M1, and using the "reg-io-width"
>   property there isn't possible.
>
> - Relies on the FIFO control bits which are in a different position on
>   the Apple M1.
>
> So I am starting to wonder whether it makes sense to simply copy
> serial_s5p.c to serial_s5l.c and modify that one to do the right thing
> on the apple SoC.
>
> Alternatively I could introduce Kconfig stuff to switch between S5L
> and S5P support.

Well, firstly you can use a compatible string as mentioned above which
solves the normal case. You just need a flag in plat which indicates
that it should use word access for some registers. The ns16550 shows
how to call dev_get_driver_data(). You will need to add members to
s5p_serial_plat to select the tx/tx FIFO values since these need tobe
variables now.

BTW s5p_serial_baud() should have a param to indicate which access
method to use.

For the debug UART I suggest just putting an
IS_ENABLED(CONFIG_ARCH_APPLE) in there. You could add a Kconfig for
the Apple UART (even though it uses the same file) which might be a
little nicer, but it is only the debug UART, after all...

Finally, this driver is not perfect as it has CLK_EXYNOS only for some
boards. Ideally all boards would move to use the clock driver.

Regards,
Simon

^ permalink raw reply	[flat|nested] 46+ messages in thread

end of thread, other threads:[~2021-10-03  2:01 UTC | newest]

Thread overview: 46+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-09-18 13:54 [PATCH 0/5] Apple M1 Support Mark Kettenis
2021-09-18 13:54 ` [PATCH 1/5] arm: apple: Add initial support for Apple's M1 SoC Mark Kettenis
2021-09-19  1:04   ` Bin Meng
2021-09-19  1:17     ` Bin Meng
2021-09-19 20:33       ` Mark Kettenis
2021-09-21 12:42         ` Tom Rini
2021-09-21 15:53           ` Bin Meng
2021-09-21 16:04             ` Tom Rini
2021-09-21 16:08             ` Mark Kettenis
2021-09-25 13:27               ` Simon Glass
2021-09-19 20:05     ` Mark Kettenis
2021-09-20  3:15   ` Simon Glass
2021-09-20  8:49     ` Mark Kettenis
2021-09-21  1:11       ` Simon Glass
2021-09-18 13:54 ` [PATCH 2/5] serial: s5p: Add Apple M1 support Mark Kettenis
2021-09-19  1:11   ` Bin Meng
2021-09-19 20:30     ` Mark Kettenis
2021-09-20  3:15   ` Simon Glass
2021-09-25 13:27     ` Simon Glass
2021-10-02 22:15     ` Mark Kettenis
2021-10-03  2:01       ` Simon Glass
2021-09-18 13:54 ` [PATCH 3/5] misc: Add Apple DART driver Mark Kettenis
2021-09-20  3:16   ` Simon Glass
2021-09-20  8:33     ` Mark Kettenis
2021-09-21  1:11       ` Simon Glass
2021-09-25 13:27         ` Simon Glass
2021-09-26 20:53         ` Mark Kettenis
2021-09-27 20:14           ` Simon Glass
2021-09-18 13:54 ` [PATCH 4/5] arm: dts: apple: Add preliminary device trees Mark Kettenis
2021-09-20  3:16   ` Simon Glass
2021-09-25 13:27     ` Simon Glass
2021-09-18 13:54 ` [PATCH 5/5] doc: board: apple: Add Apple M1 documentation Mark Kettenis
2021-09-19  1:22   ` Bin Meng
2021-09-20  3:16   ` Simon Glass
2021-09-25 13:27     ` Simon Glass
2021-09-20  8:45   ` Igor Opaniuk
2021-09-25  1:20 ` [PATCH 0/5] Apple M1 Support Simon Glass
2021-09-25  8:11   ` Mark Kettenis
2021-09-25 13:27     ` Simon Glass
2021-09-25 13:52       ` Mark Kettenis
2021-09-25 14:42         ` Simon Glass
2021-09-25 16:45           ` Mark Kettenis
2021-09-26 15:53             ` Simon Glass
2021-09-28  3:46               ` Simon Glass
2021-09-28  7:36                 ` Mark Kettenis
2021-09-28 12:07                   ` Simon Glass

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.