From mboxrd@z Thu Jan  1 00:00:00 1970
From: Bin Meng <bmeng.cn@gmail.com>
Date: Thu, 7 Jan 2016 10:26:13 +0800
Subject: [U-Boot] [PATCH 0/8] arm: ls1021atwr: Convert to driver model
 and enable serial support
In-Reply-To: <VI1PR04MB1600F89FB44E101E87B0E30EF4F40@VI1PR04MB1600.eurprd04.prod.outlook.com>
References: <1451551990-32165-1-git-send-email-bmeng.cn@gmail.com>
 <VI1PR04MB1600F89FB44E101E87B0E30EF4F40@VI1PR04MB1600.eurprd04.prod.outlook.com>
Message-ID: <CAEUhbmXGpHjrgYm-6mMdhnA1eu=_4a3hg3Y4in8fLpEPX1zc7Q@mail.gmail.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi Alison,

On Wed, Jan 6, 2016 at 1:31 PM, Huan Wang <alison.wang@nxp.com> wrote:
> Hi,
>
>         I tested this set on my LS1021ATWR board. NOR boot using DUART as serial output is ok. But NOR boot using LPUART as serial output failed. How about your test result?
>

Yes, I tested NOR boot using DUART or LPUART. Both boot. I suspect you
forgot to update the RCW for LPUART, or change the jumper setting
(J19, J20) to route the LPUART signal.

[snip]

Regards,
Bin