From mboxrd@z Thu Jan 1 00:00:00 1970 From: Bin Meng Date: Mon, 7 Dec 2015 17:33:43 +0800 Subject: [U-Boot] [PATCH] net: eth_designware: select PHYLIB in Kconfig In-Reply-To: <1449407996-4062-1-git-send-email-thomas@wytron.com.tw> References: <1449407996-4062-1-git-send-email-thomas@wytron.com.tw> Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Sun, Dec 6, 2015 at 9:19 PM, Thomas Chou wrote: > Select PHYLIB in drivers/net/Kconfig. And remove CONFIG_PHYLIB > from legacy board header files. > > This fixed the warnings when both ALTERA_TSE and ETH_DESIGNWARE > are selected. > > Reported-by: Pavel Machek > Signed-off-by: Thomas Chou > --- > drivers/net/Kconfig | 1 + > include/configs/axs101.h | 1 - > include/configs/bf609-ezkit.h | 1 - > include/configs/galileo.h | 1 - > include/configs/socfpga_common.h | 1 - > include/configs/spear-common.h | 1 - > include/configs/stv0991.h | 1 - > include/configs/sunxi-common.h | 1 - > include/configs/tb100.h | 1 - > include/configs/x600.h | 1 - > 10 files changed, 1 insertion(+), 9 deletions(-) > > diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig > index a03a95d..4b04d09 100644 > --- a/drivers/net/Kconfig > +++ b/drivers/net/Kconfig > @@ -88,6 +88,7 @@ config ETH_SANDBOX_RAW > > config ETH_DESIGNWARE > bool "Synopsys Designware Ethernet MAC" > + select PHYLIB > help > This MAC is present in SoCs from various vendors. It supports > 100Mbit and 1 Gbit operation. You must enable CONFIG_PHYLIB to > diff --git a/include/configs/axs101.h b/include/configs/axs101.h > index 650d97d..eeb2ae6 100644 > --- a/include/configs/axs101.h > +++ b/include/configs/axs101.h > @@ -95,7 +95,6 @@ > /* > * Ethernet PHY configuration > */ > -#define CONFIG_PHYLIB > #define CONFIG_MII > #define CONFIG_PHY_GIGE > > diff --git a/include/configs/bf609-ezkit.h b/include/configs/bf609-ezkit.h > index 0e353b9..b5d4847 100644 > --- a/include/configs/bf609-ezkit.h > +++ b/include/configs/bf609-ezkit.h > @@ -75,7 +75,6 @@ > #define CONFIG_DW_ALTDESCRIPTOR > #define CONFIG_CMD_MII > #define CONFIG_MII > -#define CONFIG_PHYLIB > > /* i2c Settings */ > #define CONFIG_SYS_I2C > diff --git a/include/configs/galileo.h b/include/configs/galileo.h > index eb16a5e..14a42b1 100644 > --- a/include/configs/galileo.h > +++ b/include/configs/galileo.h > @@ -45,7 +45,6 @@ > /* 10/100M Ethernet support */ > #define CONFIG_DESIGNWARE_ETH > #define CONFIG_DW_ALTDESCRIPTOR > -#define CONFIG_PHYLIB > > /* Environment configuration */ > #define CONFIG_ENV_SECT_SIZE 0x1000 > diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h > index b3f65b6..86eccba 100644 > --- a/include/configs/socfpga_common.h > +++ b/include/configs/socfpga_common.h > @@ -105,7 +105,6 @@ > #define CONFIG_DW_ALTDESCRIPTOR > #define CONFIG_MII > #define CONFIG_AUTONEG_TIMEOUT (15 * CONFIG_SYS_HZ) > -#define CONFIG_PHYLIB > #define CONFIG_PHY_GIGE > #endif > > diff --git a/include/configs/spear-common.h b/include/configs/spear-common.h > index 1d69477..d2630f4 100644 > --- a/include/configs/spear-common.h > +++ b/include/configs/spear-common.h > @@ -17,7 +17,6 @@ > > /* Ethernet driver configuration */ > #define CONFIG_MII > -#define CONFIG_PHYLIB > #define CONFIG_PHY_RESET_DELAY 10000 /* in usec */ > #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ > > diff --git a/include/configs/stv0991.h b/include/configs/stv0991.h > index 14c6a9e..f421321 100644 > --- a/include/configs/stv0991.h > +++ b/include/configs/stv0991.h > @@ -53,7 +53,6 @@ > /* GMAC related configs */ > > #define CONFIG_MII > -#define CONFIG_PHYLIB > #define CONFIG_DW_ALTDESCRIPTOR > #define CONFIG_PHY_MICREL > > diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h > index 98a2c74..31a68ac 100644 > --- a/include/configs/sunxi-common.h > +++ b/include/configs/sunxi-common.h > @@ -312,7 +312,6 @@ extern int soft_i2c_gpio_scl; > #define CONFIG_PHY_GIGE /* GMAC can use gigabit PHY */ > #define CONFIG_PHY_ADDR 1 > #define CONFIG_MII /* MII PHY management */ > -#define CONFIG_PHYLIB > #endif > > #ifdef CONFIG_USB_EHCI_HCD > diff --git a/include/configs/tb100.h b/include/configs/tb100.h > index 8660ed4..e06484f 100644 > --- a/include/configs/tb100.h > +++ b/include/configs/tb100.h > @@ -42,7 +42,6 @@ > /* > * Ethernet PHY configuration > */ > -#define CONFIG_PHYLIB > #define CONFIG_PHY_GIGE > > /* > diff --git a/include/configs/x600.h b/include/configs/x600.h > index 58f1aca..0263c50 100644 > --- a/include/configs/x600.h > +++ b/include/configs/x600.h > @@ -77,7 +77,6 @@ > > /* Ethernet config options */ > #define CONFIG_MII > -#define CONFIG_PHYLIB > #define CONFIG_PHY_RESET_DELAY 10000 /* in usec */ > #define CONFIG_PHY_ADDR 0 /* PHY address */ > #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ > -- Reviewed-by: Bin Meng