Hi People,

I'm building an OpenBMC image for target Palmetto on Ubuntu 16.04 to try to
make it work on the Raspberry PI 3. I've followed these steps:


*1.  *sudo apt-get install -y git build-essential libsdl1.2-dev texinfo
gawk chrpath diffstat

*2.* git clone git@github.com:openbmc/openbmc.git

*3.* cd openbmc

*4-* export TEMPLATECONF=meta-openbmc-machines/meta-
openpower/meta-ibm/meta-palmetto/conf

*tester@obmc:/openbmc$* . oe-init-build-env ~/my-build

*tester@obmc:~/my-build$* bitbake obmc-phosphor-image

*tester@obmc:/$* cd /home/tester/my-build/tmp/deploy/images/palmetto/

*tester@obmc:/$* tar -xvf
obmc-phosphor-image-palmetto-20171005142206.static.mtd.all.tar

*tester@obmc:/$* ls -lha
total 65M
drwxr-xr-x  2 root   root   4.0K Oct  5 15:37 .
drwxr-xr-x 24 root   root   4.0K Oct  5 10:29 ..
*-rw-rw-r--  1 tester tester  32M Oct  5 14:03 image-bmc*
-rw-rw-r--  2 tester tester  33M Oct  5 14:03
obmc-phosphor-image-palmetto-20171005142206.static.mtd.all.tar


Would like to know if it is the *image-bmc* file, what I will have to flash
on the SD card of the Raspberry to load OpenBMC.

Have also build an image of Linux Yocto for Raspberry PI 3.

Thanks for your attention.

Regards,




*Javier Romero*

*E-mail: xavinux@gmail.com <xavinux@gmail.com>*

*Skype: xavinux*