1.  sudo apt-get install -y git build-essential libsdl1.2-dev texinfo gawk chrpath diffstat

2. git clone git@github.com:openbmc/openbmc.git

3. cd openbmc

4- export TEMPLATECONF=meta-openbmc-machines/meta-
openpower/meta-ibm/meta-palmetto/conf

tester@obmc:/openbmc$ . oe-init-build-env ~/my-build

tester@obmc:~/my-build$ bitbake obmc-phosphor-image

tester@obmc:/$ cd /home/tester/my-build/tmp/deploy/images/palmetto/

tester@obmc:/$ tar -xvf obmc-phosphor-image-palmetto-20171005142206.static.mtd.all.tar

tester@obmc:/$ ls -lha
total 65M
drwxr-xr-x  2 root   root   4.0K Oct  5 15:37 .
drwxr-xr-x 24 root   root   4.0K Oct  5 10:29 ..
-rw-rw-r--  1 tester tester  32M Oct  5 14:03 image-bmc
-rw-rw-r--  2 tester tester  33M Oct  5 14:03 obmc-phosphor-image-palmetto-20171005142206.static.mtd.all.tar

Would like to know if it is the image-bmc file, what I will have to flash on the SD card of the Raspberry to load OpenBMC.

Have also build an image of Linux Yocto for Raspberry PI 3.

Thanks for your attention.

Regards,