From mboxrd@z Thu Jan 1 00:00:00 1970 From: daniel.baluta@gmail.com (Daniel Baluta) Date: Wed, 1 Jun 2016 17:41:17 +0300 Subject: How to enable IIO driver in 3.18 kernel In-Reply-To: References: <16140.1464754265@turing-police.cc.vt.edu> Message-ID: To: kernelnewbies@lists.kernelnewbies.org List-Id: kernelnewbies.lists.kernelnewbies.org On Wed, Jun 1, 2016 at 5:26 PM, Munagala Naresh wrote: > Thanks for the response. > > From the "cat /proc/devices", I could see "iio" listed like this. > > / # cat /proc/devices > cat /proc/devices > Character devices: > 1 mem > 4 /dev/vc/0 > 4 tty > 5 /dev/tty > 5 /dev/console > 5 /dev/ptmx > ------ > 250 iio > 251 pps > ----- > > I could see few other deices @ /dev/xxxx. CONFIG_DEVTMPFS is not set in the > def config. I will try it by adding "CONFIG_DEVTMPFS=y" and > "CONFIG_DEVTMPFS_MOUNT=y". Please don't use top posting. You can look into /sys/bus/iio/devices/iio:device0/dev and get the MAJOR and MINOR, then create the device node manually, using: mknod /dev/iio:device0 c MAJOR MINOR Not sure why are you mentioning /proc/devices here. thanks, Daniel.