From mboxrd@z Thu Jan 1 00:00:00 1970 From: friesendrywall@gmail.com (Erik Friesen) Date: Sat, 6 Feb 2016 12:22:35 -0500 Subject: SGTL5000 misc In-Reply-To: References: Message-ID: To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Well, I have posted a thing or two there, not sure if the mailing list is even working, as I haven't received any replies. On Fri, Feb 5, 2016 at 5:00 AM, Fabio Estevam wrote: > On Fri, Feb 5, 2016 at 1:08 AM, Erik Friesen wrote: >> There is another issue here, but when I have this connected to >> external power, it won't start the card on every other boot. >> >> With the code below, it seems to start every time. If I don't skip, >> it dies on #8, which is the write of 0x7060 to CHIP_ANA_POWER >> >> This embeddedarm board supposedly power cycles the regulators, don't >> know if that is a factor or not. The board finishes powerup 0x4060, >> but comes back on reboot at the reset value of 0x7060 > > It would be nice if you could send a patch to alsa-devel mailing list, > so that this can be properly reviewed there.