From mboxrd@z Thu Jan 1 00:00:00 1970 From: raulpblooper@gmail.com (Raul Piper) Date: Tue, 14 Jun 2016 09:59:39 +0530 Subject: Developing Linux Kernel Driver for LED Driver Message-ID: To: kernelnewbies@lists.kernelnewbies.org List-Id: kernelnewbies.lists.kernelnewbies.org PS:Reposting it from the led-linux group to here. Hi, I am developing a Linux kernel driver(software) for a 16 channel LED driver(this driver here refers to the hardware of LED called LED Driver ) .Below are few of its characteristics DC input voltage range : 10 V to 28 V Integrated boost converter with adaptive output voltage 16 channels and independent PWM brightness control Up to 15 white LEDs per channel On-board microcontroller for total device control through 4-wire serial interface LED short-circuit faults management I have done some brute force work by creating a user space application to do some portion of the LED glowing, I know its not a full fledged work. I want to know on the below points : 1. How can I convert it into a GPIO driver and the standard Framework with which I can integrate it. 2.The architecture of the user space application to test this driver 3.The requirement for the Device Tree configuration for this. 4.The name of the LED class driver maintainer in the kernel linux, to whom I have to send the patch? 5.Any other mandatory requirement to which I have to adhere to for pushing the device driver to the main line. PS : I am using TI's beagleboard for developing the driver on the kernel 4.1x. Any reference example for such n channel Led driver will be helpful . Br, Rp